76 lines
2.6 KiB
C
76 lines
2.6 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Endstop Interrupts
|
|
*
|
|
* Without endstop interrupts the endstop pins must be polled continually in
|
|
* the stepper-ISR via endstops.update(), most of the time finding no change.
|
|
* With this feature endstops.update() is called only when we know that at
|
|
* least one endstop has changed state, saving valuable CPU cycles.
|
|
*
|
|
* This feature only works when all used endstop pins can generate an 'external interrupt'.
|
|
*
|
|
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
|
|
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
|
|
*/
|
|
|
|
#ifndef _ENDSTOP_INTERRUPTS_H_
|
|
#define _ENDSTOP_INTERRUPTS_H_
|
|
|
|
/**
|
|
* Endstop interrupts for Due based targets.
|
|
* On Due, all pins support external interrupt capability.
|
|
*/
|
|
|
|
void setup_endstop_interrupts(void) {
|
|
#if HAS_X_MAX
|
|
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
|
|
#endif
|
|
#if HAS_X_MIN
|
|
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
|
|
#endif
|
|
#if HAS_Y_MAX
|
|
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
|
|
#endif
|
|
#if HAS_Y_MIN
|
|
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
|
|
#endif
|
|
#if HAS_Z_MAX
|
|
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
|
|
#endif
|
|
#if HAS_Z_MIN
|
|
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
|
|
#endif
|
|
#if HAS_Z2_MAX
|
|
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
|
|
#endif
|
|
#if HAS_Z2_MIN
|
|
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
|
|
#endif
|
|
#if HAS_Z_MIN_PROBE_PIN
|
|
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
|
|
#endif
|
|
}
|
|
|
|
#endif //_ENDSTOP_INTERRUPTS_H_
|