98 lines
2.5 KiB
C++
98 lines
2.5 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include "../../inc/MarlinConfig.h"
|
|
|
|
#if FAN_COUNT > 0
|
|
|
|
#include "../gcode.h"
|
|
#include "../../Marlin.h" // for fan_speed — should move those to Planner
|
|
|
|
#if ENABLED(SINGLENOZZLE)
|
|
#include "../../module/motion.h"
|
|
#include "../../module/tool_change.h"
|
|
#endif
|
|
|
|
/**
|
|
* M106: Set Fan Speed
|
|
*
|
|
* S<int> Speed between 0-255
|
|
* P<index> Fan index, if more than one fan
|
|
*
|
|
* With EXTRA_FAN_SPEED enabled:
|
|
*
|
|
* T<int> Restore/Use/Set Temporary Speed:
|
|
* 1 = Restore previous speed after T2
|
|
* 2 = Use temporary speed set with T3-255
|
|
* 3-255 = Set the speed for use with T2
|
|
*/
|
|
void GcodeSuite::M106() {
|
|
const uint8_t p = parser.byteval('P');
|
|
const uint16_t s = parser.ushortval('S', 255);
|
|
|
|
#if ENABLED(SINGLENOZZLE)
|
|
if (p != active_extruder) {
|
|
if (p < EXTRUDERS) singlenozzle_fan_speed[p] = MIN(s, 255U);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
if (p < FAN_COUNT) {
|
|
#if ENABLED(EXTRA_FAN_SPEED)
|
|
const int16_t t = parser.intval('T');
|
|
if (t > 0) {
|
|
switch (t) {
|
|
case 1:
|
|
fan_speed[p] = old_fan_speed[p];
|
|
break;
|
|
case 2:
|
|
old_fan_speed[p] = fan_speed[p];
|
|
fan_speed[p] = new_fan_speed[p];
|
|
break;
|
|
default:
|
|
new_fan_speed[p] = MIN(t, 255U);
|
|
break;
|
|
}
|
|
return;
|
|
}
|
|
#endif // EXTRA_FAN_SPEED
|
|
fan_speed[p] = MIN(s, 255U);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* M107: Fan Off
|
|
*/
|
|
void GcodeSuite::M107() {
|
|
const uint16_t p = parser.ushortval('P');
|
|
#if ENABLED(SINGLENOZZLE)
|
|
if (p != active_extruder) {
|
|
if (p < EXTRUDERS) singlenozzle_fan_speed[p] = 0;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
if (p < FAN_COUNT) fan_speed[p] = 0;
|
|
}
|
|
|
|
#endif // FAN_COUNT > 0
|