964 lines
25 KiB
C
964 lines
25 KiB
C
#ifndef PINS_H
|
|
#define PINS_H
|
|
|
|
#if MOTHERBOARD == 99
|
|
#define KNOWN_BOARD 1
|
|
|
|
#define X_STEP_PIN 2
|
|
#define X_DIR_PIN 3
|
|
#define X_ENABLE_PIN -1
|
|
#define X_MIN_PIN -1
|
|
#define X_MAX_PIN 16
|
|
|
|
#define Y_STEP_PIN 5
|
|
#define Y_DIR_PIN 6
|
|
#define Y_ENABLE_PIN -1
|
|
#define Y_MIN_PIN 67
|
|
#define Y_MAX_PIN -1
|
|
|
|
#define Z_STEP_PIN 62
|
|
#define Z_DIR_PIN 63
|
|
#define Z_ENABLE_PIN -1
|
|
#define Z_MIN_PIN 59
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E0_STEP_PIN 65
|
|
#define E0_DIR_PIN 66
|
|
#define E0_ENABLE_PIN -1
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 53
|
|
#define LED_PIN -1
|
|
#define FAN_PIN -1
|
|
#define PS_ON_PIN 9
|
|
#define KILL_PIN -1
|
|
|
|
#define HEATER_0_PIN 13
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define HEATER_BED_PIN 4
|
|
#define TEMP_BED_PIN 10
|
|
|
|
#endif /* 99 */
|
|
|
|
/****************************************************************************************
|
|
* Gen7 v1.1, v1.2, v1.3, v1.4 pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
|
|
|
|
#if MOTHERBOARD == 13
|
|
#define MOTHERBOARD 11
|
|
#define GEN7_VERSION 14 // v1.4
|
|
#endif
|
|
|
|
#if MOTHERBOARD == 12
|
|
#define MOTHERBOARD 11
|
|
#define GEN7_VERSION 13 // v1.3
|
|
#endif
|
|
|
|
#if MOTHERBOARD == 11
|
|
#define KNOWN_BOARD
|
|
|
|
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
|
|
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
|
|
|
|
#endif
|
|
|
|
#ifndef GEN7_VERSION
|
|
#define GEN7_VERSION 12 // v1.x
|
|
#endif
|
|
|
|
//x axis pins
|
|
#define X_STEP_PIN 19
|
|
#define X_DIR_PIN 18
|
|
#define X_ENABLE_PIN 24
|
|
#define X_MIN_PIN 7
|
|
#define X_MAX_PIN -1
|
|
|
|
//y axis pins
|
|
#define Y_STEP_PIN 23
|
|
#define Y_DIR_PIN 22
|
|
#define Y_ENABLE_PIN 24
|
|
#define Y_MIN_PIN 5
|
|
#define Y_MAX_PIN -1
|
|
|
|
//z axis pins
|
|
#define Z_STEP_PIN 26
|
|
#define Z_DIR_PIN 25
|
|
#define Z_ENABLE_PIN 24
|
|
#define Z_MIN_PIN 1
|
|
#define Z_MAX_PIN 0
|
|
|
|
//extruder pins
|
|
#define E0_STEP_PIN 28
|
|
#define E0_DIR_PIN 27
|
|
#define E0_ENABLE_PIN 24
|
|
|
|
#define TEMP_0_PIN 1
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 2
|
|
|
|
#define HEATER_0_PIN 4
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define HEATER_BED_PIN 3
|
|
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS -1 // SCL pin of I2C header
|
|
#define LED_PIN -1
|
|
|
|
#if (GEN7_VERSION >= 13)
|
|
// Gen7 v1.3 removed the fan pin
|
|
#define FAN_PIN -1
|
|
#else
|
|
#define FAN_PIN 31
|
|
#endif
|
|
#define PS_ON_PIN 15
|
|
|
|
#if (GEN7_VERSION < 14)
|
|
// Gen 1.3 and earlier supplied thermistor power via PS_ON
|
|
// Need to ignore the bad thermistor readings on those units
|
|
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
|
#endif
|
|
|
|
//our pin for debugging.
|
|
#define DEBUG_PIN 0
|
|
|
|
//our RS485 pins
|
|
#define TX_ENABLE_PIN 12
|
|
#define RX_ENABLE_PIN 13
|
|
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
*********
|
|
* Gen7 Alfons3 pin assignment
|
|
*
|
|
********************************************************************************
|
|
********/
|
|
/* These Pins are assigned for the modified GEN7 Board from Alfons3 Please review the pins and adjust it for your needs*/
|
|
|
|
#if MOTHERBOARD == 10
|
|
#define KNOWN_BOARD
|
|
|
|
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
|
|
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
|
|
|
|
#endif
|
|
|
|
//x axis pins
|
|
#define X_STEP_PIN 21 //different from stanard GEN7
|
|
#define X_DIR_PIN 20 //different from stanard GEN7
|
|
#define X_ENABLE_PIN 24
|
|
#define X_MIN_PIN 0
|
|
#define X_MAX_PIN -1
|
|
|
|
//y axis pins
|
|
#define Y_STEP_PIN 23
|
|
#define Y_DIR_PIN 22
|
|
#define Y_ENABLE_PIN 24
|
|
#define Y_MIN_PIN 1
|
|
#define Y_MAX_PIN -1
|
|
|
|
//z axis pins
|
|
#define Z_STEP_PIN 26
|
|
#define Z_DIR_PIN 25
|
|
#define Z_ENABLE_PIN 24
|
|
#define Z_MIN_PIN 2
|
|
#define Z_MAX_PIN -1
|
|
|
|
//extruder pins
|
|
#define E0_STEP_PIN 28
|
|
#define E0_DIR_PIN 27
|
|
#define E0_ENABLE_PIN 24
|
|
|
|
#define TEMP_0_PIN 2
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
|
|
|
|
#define HEATER_0_PIN 4
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define HEATER_BED_PIN 3 // (bed)
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
|
|
#define LED_PIN -1
|
|
|
|
#define FAN_PIN -1
|
|
#define PS_ON_PIN 19
|
|
//our pin for debugging.
|
|
|
|
#define DEBUG_PIN -1
|
|
|
|
//our RS485 pins
|
|
//#define TX_ENABLE_PIN 12
|
|
//#define RX_ENABLE_PIN 13
|
|
|
|
#define BEEPER -1
|
|
#define SDCARDDETECT -1
|
|
#define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work
|
|
|
|
//Pins for 4bit LCD Support
|
|
#define LCD_PINS_RS 18
|
|
#define LCD_PINS_ENABLE 17
|
|
#define LCD_PINS_D4 16
|
|
#define LCD_PINS_D5 15
|
|
#define LCD_PINS_D6 13
|
|
#define LCD_PINS_D7 14
|
|
|
|
//buttons are directly attached
|
|
#define BTN_EN1 11
|
|
#define BTN_EN2 10
|
|
#define BTN_ENC 12 //the click
|
|
|
|
#define BLEN_C 2
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Arduino Mega pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34
|
|
#define KNOWN_BOARD 1
|
|
|
|
//////////////////FIX THIS//////////////
|
|
#ifndef __AVR_ATmega1280__
|
|
#ifndef __AVR_ATmega2560__
|
|
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1
|
|
// #define RAMPS_V_1_3
|
|
// #define RAMPS_V_1_0
|
|
|
|
#ifdef MOTHERBOARD == 33 || MOTHERBOARD == 34
|
|
|
|
#define X_STEP_PIN 54
|
|
#define X_DIR_PIN 55
|
|
#define X_ENABLE_PIN 38
|
|
#define X_MIN_PIN 3
|
|
#define X_MAX_PIN 2 //2 //Max endstops default to disabled "-1", set to commented value to enable.
|
|
|
|
#define Y_STEP_PIN 60
|
|
#define Y_DIR_PIN 61
|
|
#define Y_ENABLE_PIN 56
|
|
#define Y_MIN_PIN 14
|
|
#define Y_MAX_PIN 15 //15
|
|
|
|
#define Z_STEP_PIN 46
|
|
#define Z_DIR_PIN 48
|
|
#define Z_ENABLE_PIN 62
|
|
#define Z_MIN_PIN 18
|
|
#define Z_MAX_PIN 19
|
|
|
|
#define E0_STEP_PIN 26
|
|
#define E0_DIR_PIN 28
|
|
#define E0_ENABLE_PIN 24
|
|
|
|
#define E1_STEP_PIN 36
|
|
#define E1_DIR_PIN 34
|
|
#define E1_ENABLE_PIN 30
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 53
|
|
#define LED_PIN 13
|
|
|
|
#if MOTHERBOARD == 33
|
|
#define FAN_PIN 9 // (Sprinter config)
|
|
#else
|
|
#define FAN_PIN 4 // IO pin. Buffer needed
|
|
#endif
|
|
#define PS_ON_PIN 12
|
|
#define KILL_PIN -1
|
|
|
|
#define HEATER_0_PIN 10 // EXTRUDER 1
|
|
#if MOTHERBOARD == 33
|
|
#define HEATER_1_PIN -1
|
|
#else
|
|
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
|
|
#endif
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_0_PIN 13 // ANALOG NUMBERING
|
|
#define TEMP_1_PIN 15 // ANALOG NUMBERING
|
|
#define TEMP_2_PIN -1 // ANALOG NUMBERING
|
|
#define HEATER_BED_PIN 8 // BED
|
|
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
|
|
|
|
#ifdef ULTRA_LCD
|
|
|
|
#ifdef NEWPANEL
|
|
//arduino pin which triggers an piezzo beeper
|
|
#define BEEPER 33 // Beeper on AUX-4
|
|
|
|
#define LCD_PINS_RS 16
|
|
#define LCD_PINS_ENABLE 17
|
|
#define LCD_PINS_D4 23
|
|
#define LCD_PINS_D5 25
|
|
#define LCD_PINS_D6 27
|
|
#define LCD_PINS_D7 29
|
|
|
|
//buttons are directly attached using AUX-2
|
|
#define BTN_EN1 44
|
|
#define BTN_EN2 42
|
|
#define BTN_ENC 64 //the click
|
|
|
|
#define BLEN_C 2
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
|
|
#define SDCARDDETECT 31 // Ramps does not use this port
|
|
|
|
//encoder rotation values
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
|
|
#else //old style panel with shift register
|
|
//arduino pin witch triggers an piezzo beeper
|
|
#define BEEPER 33 No Beeper added
|
|
|
|
//buttons are attached to a shift register
|
|
// Not wired this yet
|
|
//#define SHIFT_CLK 38
|
|
//#define SHIFT_LD 42
|
|
//#define SHIFT_OUT 40
|
|
//#define SHIFT_EN 17
|
|
|
|
#define LCD_PINS_RS 16
|
|
#define LCD_PINS_ENABLE 17
|
|
#define LCD_PINS_D4 23
|
|
#define LCD_PINS_D5 25
|
|
#define LCD_PINS_D6 27
|
|
#define LCD_PINS_D7 29
|
|
|
|
//encoder rotation values
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
|
|
|
|
//bits in the shift register that carry the buttons for:
|
|
// left up center down right red
|
|
#define BL_LE 7
|
|
#define BL_UP 6
|
|
#define BL_MI 5
|
|
#define BL_DW 4
|
|
#define BL_RI 3
|
|
#define BL_ST 2
|
|
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
#endif
|
|
#endif //ULTRA_LCD
|
|
|
|
#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default
|
|
|
|
#define X_STEP_PIN 26
|
|
#define X_DIR_PIN 28
|
|
#define X_ENABLE_PIN 24
|
|
#define X_MIN_PIN 3
|
|
#define X_MAX_PIN -1 //2
|
|
|
|
#define Y_STEP_PIN 38
|
|
#define Y_DIR_PIN 40
|
|
#define Y_ENABLE_PIN 36
|
|
#define Y_MIN_PIN 16
|
|
#define Y_MAX_PIN -1 //17
|
|
|
|
#define Z_STEP_PIN 44
|
|
#define Z_DIR_PIN 46
|
|
#define Z_ENABLE_PIN 42
|
|
#define Z_MIN_PIN 18
|
|
#define Z_MAX_PIN -1 //19
|
|
|
|
#define E0_STEP_PIN 32
|
|
#define E0_DIR_PIN 34
|
|
#define E0_ENABLE_PIN 30
|
|
|
|
#define SDPOWER 48
|
|
#define SDSS 53
|
|
#define LED_PIN 13
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
|
|
|
|
|
|
#ifdef RAMPS_V_1_0 // RAMPS_V_1_0
|
|
#define HEATER_0_PIN 12 // RAMPS 1.0
|
|
#define HEATER_BED_PIN -1 // RAMPS 1.0
|
|
#define FAN_PIN 11 // RAMPS 1.0
|
|
#else // RAMPS_V_1_1 or RAMPS_V_1_2
|
|
#define HEATER_0_PIN 10 // RAMPS 1.1
|
|
#define HEATER_BED_PIN 8 // RAMPS 1.1
|
|
#define FAN_PIN 9 // RAMPS 1.1
|
|
#endif
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#endif
|
|
|
|
// SPI for Max6675 Thermocouple
|
|
|
|
#ifndef SDSUPPORT
|
|
// these pins are defined in the SD library if building with SD support
|
|
#define MAX_SCK_PIN 52
|
|
#define MAX_MISO_PIN 50
|
|
#define MAX_MOSI_PIN 51
|
|
#define MAX6675_SS 53
|
|
#else
|
|
#define MAX6675_SS 49
|
|
#endif
|
|
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Duemilanove w/ ATMega328P pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 4
|
|
#define KNOWN_BOARD 1
|
|
|
|
#ifndef __AVR_ATmega328P__
|
|
#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
|
|
#define X_STEP_PIN 19
|
|
#define X_DIR_PIN 18
|
|
#define X_ENABLE_PIN -1
|
|
#define X_MIN_PIN 17
|
|
#define X_MAX_PIN -1
|
|
|
|
#define Y_STEP_PIN 10
|
|
#define Y_DIR_PIN 7
|
|
#define Y_ENABLE_PIN -1
|
|
#define Y_MIN_PIN 8
|
|
#define Y_MAX_PIN -1
|
|
|
|
#define Z_STEP_PIN 13
|
|
#define Z_DIR_PIN 3
|
|
#define Z_ENABLE_PIN 2
|
|
#define Z_MIN_PIN 4
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E0_STEP_PIN 11
|
|
#define E0_DIR_PIN 12
|
|
#define E0_ENABLE_PIN -1
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS -1
|
|
#define LED_PIN -1
|
|
#define FAN_PIN 5
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
|
|
#define HEATER_0_PIN 6
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define HEATER_BED_PIN -1
|
|
#define TEMP_BED_PIN -1
|
|
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Gen6 pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 5 || MOTHERBOARD == 51
|
|
#define KNOWN_BOARD 1
|
|
|
|
#ifndef __AVR_ATmega644P__
|
|
#ifndef __AVR_ATmega1284P__
|
|
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
//x axis pins
|
|
#define X_STEP_PIN 15
|
|
#define X_DIR_PIN 18
|
|
#define X_ENABLE_PIN 19
|
|
#define X_MIN_PIN 20
|
|
#define X_MAX_PIN -1
|
|
|
|
//y axis pins
|
|
#define Y_STEP_PIN 23
|
|
#define Y_DIR_PIN 22
|
|
#define Y_ENABLE_PIN 24
|
|
#define Y_MIN_PIN 25
|
|
#define Y_MAX_PIN -1
|
|
|
|
//z axis pins
|
|
#define Z_STEP_PIN 27
|
|
#define Z_DIR_PIN 28
|
|
#define Z_ENABLE_PIN 29
|
|
#define Z_MIN_PIN 30
|
|
#define Z_MAX_PIN -1
|
|
|
|
//extruder pins
|
|
#define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715
|
|
#define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
|
|
#define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
|
|
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
|
|
#define TEMP_1_PIN -1 //changed @ rkoeppl 20110410
|
|
|
|
|
|
#define TEMP_2_PIN -1 //changed @ rkoeppl 20110410
|
|
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#if MOTHERBOARD == 5
|
|
#define HEATER_BED_PIN -1 //changed @ rkoeppl 20110410
|
|
#define TEMP_BED_PIN -1 //changed @ rkoeppl 20110410
|
|
#else
|
|
#define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
|
|
#define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
|
|
#endif
|
|
#define SDPOWER -1
|
|
#define SDSS 17
|
|
#define LED_PIN -1 //changed @ rkoeppl 20110410
|
|
#define FAN_PIN -1 //changed @ rkoeppl 20110410
|
|
#define PS_ON_PIN -1 //changed @ rkoeppl 20110410
|
|
//our pin for debugging.
|
|
|
|
#define DEBUG_PIN 0
|
|
|
|
//our RS485 pins
|
|
#define TX_ENABLE_PIN 12
|
|
#define RX_ENABLE_PIN 13
|
|
|
|
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Sanguinololu pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 62
|
|
#undef MOTHERBOARD
|
|
#define MOTHERBOARD 6
|
|
#define SANGUINOLOLU_V_1_2
|
|
#endif
|
|
#if MOTHERBOARD == 6
|
|
#define KNOWN_BOARD 1
|
|
#ifndef __AVR_ATmega644P__
|
|
#ifndef __AVR_ATmega1284P__
|
|
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
#define X_STEP_PIN 15
|
|
#define X_DIR_PIN 21
|
|
#define X_MIN_PIN 18
|
|
#define X_MAX_PIN -1
|
|
|
|
#define Y_STEP_PIN 22
|
|
#define Y_DIR_PIN 23
|
|
#define Y_MIN_PIN 19
|
|
#define Y_MAX_PIN -1
|
|
|
|
#define Z_STEP_PIN 3
|
|
#define Z_DIR_PIN 2
|
|
#define Z_MIN_PIN 20
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E0_STEP_PIN 1
|
|
#define E0_DIR_PIN 0
|
|
|
|
#define LED_PIN -1
|
|
|
|
#define FAN_PIN -1
|
|
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
|
|
#define HEATER_0_PIN 13 // (extruder)
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
|
|
#ifdef SANGUINOLOLU_V_1_2
|
|
|
|
#define HEATER_BED_PIN 12 // (bed)
|
|
#define X_ENABLE_PIN 14
|
|
#define Y_ENABLE_PIN 14
|
|
#define Z_ENABLE_PIN 26
|
|
#define E0_ENABLE_PIN 14
|
|
|
|
#else
|
|
|
|
#define HEATER_BED_PIN 14 // (bed)
|
|
#define X_ENABLE_PIN -1
|
|
#define Y_ENABLE_PIN -1
|
|
#define Z_ENABLE_PIN -1
|
|
#define E0_ENABLE_PIN -1
|
|
|
|
#endif
|
|
|
|
#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
|
|
#define SDPOWER -1
|
|
#define SDSS 31
|
|
|
|
#endif
|
|
|
|
|
|
#if MOTHERBOARD == 7
|
|
#define KNOWN_BOARD
|
|
/*****************************************************************
|
|
* Ultimaker pin assignment
|
|
******************************************************************/
|
|
|
|
#ifndef __AVR_ATmega1280__
|
|
#ifndef __AVR_ATmega2560__
|
|
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
#define X_STEP_PIN 25
|
|
#define X_DIR_PIN 23
|
|
#define X_MIN_PIN 22
|
|
#define X_MAX_PIN 24
|
|
#define X_ENABLE_PIN 27
|
|
|
|
#define Y_STEP_PIN 31
|
|
#define Y_DIR_PIN 33
|
|
#define Y_MIN_PIN 26
|
|
#define Y_MAX_PIN 28
|
|
#define Y_ENABLE_PIN 29
|
|
|
|
#define Z_STEP_PIN 37
|
|
#define Z_DIR_PIN 39
|
|
#define Z_MIN_PIN 30
|
|
#define Z_MAX_PIN 32
|
|
#define Z_ENABLE_PIN 35
|
|
|
|
#define HEATER_BED_PIN 4
|
|
#define TEMP_BED_PIN 10
|
|
|
|
#define HEATER_0_PIN 2
|
|
#define TEMP_0_PIN 8
|
|
|
|
#define HEATER_1_PIN 3
|
|
#define TEMP_1_PIN 9
|
|
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
|
|
#define E0_STEP_PIN 43
|
|
#define E0_DIR_PIN 45
|
|
#define E0_ENABLE_PIN 41
|
|
|
|
#define E1_STEP_PIN 49
|
|
#define E1_DIR_PIN 47
|
|
#define E1_ENABLE_PIN 51
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 53
|
|
#define LED_PIN 13
|
|
#define FAN_PIN 7
|
|
#define PS_ON_PIN 12
|
|
#define KILL_PIN -1
|
|
#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing.
|
|
|
|
#ifdef ULTRA_LCD
|
|
|
|
#ifdef NEWPANEL
|
|
//arduino pin witch triggers an piezzo beeper
|
|
#define BEEPER 18
|
|
|
|
#define LCD_PINS_RS 20
|
|
#define LCD_PINS_ENABLE 17
|
|
#define LCD_PINS_D4 16
|
|
#define LCD_PINS_D5 21
|
|
#define LCD_PINS_D6 5
|
|
#define LCD_PINS_D7 6
|
|
|
|
//buttons are directly attached
|
|
#define BTN_EN1 40
|
|
#define BTN_EN2 42
|
|
#define BTN_ENC 19 //the click
|
|
|
|
#define BLEN_C 2
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
|
|
#define SDCARDDETECT 38
|
|
|
|
//encoder rotation values
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
#else //old style panel with shift register
|
|
//arduino pin witch triggers an piezzo beeper
|
|
#define BEEPER 18
|
|
|
|
//buttons are attached to a shift register
|
|
#define SHIFT_CLK 38
|
|
#define SHIFT_LD 42
|
|
#define SHIFT_OUT 40
|
|
#define SHIFT_EN 17
|
|
|
|
#define LCD_PINS_RS 16
|
|
#define LCD_PINS_ENABLE 5
|
|
#define LCD_PINS_D4 6
|
|
#define LCD_PINS_D5 21
|
|
#define LCD_PINS_D6 20
|
|
#define LCD_PINS_D7 19
|
|
|
|
//encoder rotation values
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
|
|
|
|
//bits in the shift register that carry the buttons for:
|
|
// left up center down right red
|
|
#define BL_LE 7
|
|
#define BL_UP 6
|
|
#define BL_MI 5
|
|
#define BL_DW 4
|
|
#define BL_RI 3
|
|
#define BL_ST 2
|
|
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
#endif
|
|
#endif //ULTRA_LCD
|
|
|
|
#endif
|
|
|
|
#if MOTHERBOARD == 71
|
|
#define KNOWN_BOARD
|
|
/*****************************************************************
|
|
* Ultimaker pin assignment (Old electronics)
|
|
******************************************************************/
|
|
|
|
#ifndef __AVR_ATmega1280__
|
|
#ifndef __AVR_ATmega2560__
|
|
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
#define X_STEP_PIN 25
|
|
#define X_DIR_PIN 23
|
|
#define X_MIN_PIN 15
|
|
#define X_MAX_PIN 14
|
|
#define X_ENABLE_PIN 27
|
|
|
|
#define Y_STEP_PIN 31
|
|
#define Y_DIR_PIN 33
|
|
#define Y_MIN_PIN 17
|
|
#define Y_MAX_PIN 16
|
|
#define Y_ENABLE_PIN 29
|
|
|
|
#define Z_STEP_PIN 37
|
|
#define Z_DIR_PIN 39
|
|
#define Z_MIN_PIN 19
|
|
#define Z_MAX_PIN 18
|
|
#define Z_ENABLE_PIN 35
|
|
|
|
#define HEATER_BED_PIN -1
|
|
#define TEMP_BED_PIN -1
|
|
|
|
#define HEATER_0_PIN 2
|
|
#define TEMP_0_PIN 8
|
|
|
|
#define HEATER_1_PIN 1
|
|
#define TEMP_1_PIN 1
|
|
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
|
|
#define E0_STEP_PIN 43
|
|
#define E0_DIR_PIN 45
|
|
#define E0_ENABLE_PIN 41
|
|
|
|
#define E1_STEP_PIN -1
|
|
#define E1_DIR_PIN -1
|
|
#define E1_ENABLE_PIN -1
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS -1
|
|
#define LED_PIN -1
|
|
#define FAN_PIN -1
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
|
|
|
|
#define LCD_PINS_RS 24
|
|
#define LCD_PINS_ENABLE 22
|
|
#define LCD_PINS_D4 36
|
|
#define LCD_PINS_D5 34
|
|
#define LCD_PINS_D6 32
|
|
#define LCD_PINS_D7 30
|
|
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Teensylu 0.7 pin assingments (ATMEGA90USB)
|
|
* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE!
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 8
|
|
#define MOTHERBOARD 8
|
|
#define KNOWN_BOARD 1
|
|
|
|
|
|
#define X_STEP_PIN 0
|
|
#define X_DIR_PIN 1
|
|
#define X_ENABLE_PIN 39
|
|
#define X_MIN_PIN 13
|
|
#define X_MAX_PIN -1
|
|
|
|
#define Y_STEP_PIN 2
|
|
#define Y_DIR_PIN 3
|
|
#define Y_ENABLE_PIN 38
|
|
#define Y_MIN_PIN 14
|
|
#define Y_MAX_PIN -1
|
|
|
|
#define Z_STEP_PIN 4
|
|
#define Z_DIR_PIN 5
|
|
#define Z_ENABLE_PIN 23
|
|
#define Z_MIN_PIN 15
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E0_STEP_PIN 6
|
|
#define E0_DIR_PIN 7
|
|
#define E0_ENABLE_PIN 19
|
|
|
|
|
|
|
|
#define HEATER_0_PIN 21 // Extruder
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define HEATER_BED_PIN 20 // Bed
|
|
#define FAN_PIN 22 // Fan
|
|
|
|
#define TEMP_0_PIN 7 // Extruder
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 6 // Bed
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 8
|
|
#define LED_PIN -1
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
#define ALARM_PIN -1
|
|
|
|
#ifndef SDSUPPORT
|
|
// these pins are defined in the SD library if building with SD support
|
|
#define SCK_PIN 9
|
|
#define MISO_PIN 11
|
|
#define MOSI_PIN 10
|
|
#endif
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Gen3+ pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 9
|
|
#define MOTHERBOARD 6
|
|
#define KNOWN_BOARD 1
|
|
#ifndef __AVR_ATmega644P__
|
|
#ifndef __AVR_ATmega1284P__
|
|
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
#define X_STEP_PIN 15
|
|
#define X_DIR_PIN 18
|
|
#define X_MIN_PIN 20
|
|
#define X_MAX_PIN -1
|
|
|
|
#define Y_STEP_PIN 23
|
|
#define Y_DIR_PIN 22
|
|
#define Y_MIN_PIN 25
|
|
#define Y_MAX_PIN -1
|
|
|
|
#define Z_STEP_PIN 27
|
|
#define Z_DIR_PIN 28
|
|
#define Z_MIN_PIN 30
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E_STEP_PIN 17
|
|
#define E_DIR_PIN 21
|
|
|
|
#define LED_PIN -1
|
|
|
|
#define FAN_PIN -1
|
|
|
|
#define PS_ON_PIN 14
|
|
#define KILL_PIN -1
|
|
|
|
#define HEATER_0_PIN 12 // (extruder)
|
|
|
|
#define HEATER_1_PIN 16 // (bed)
|
|
#define X_ENABLE_PIN 19
|
|
#define Y_ENABLE_PIN 24
|
|
#define Z_ENABLE_PIN 29
|
|
#define E_ENABLE_PIN 13
|
|
|
|
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
|
|
#define TEMP_1_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
|
|
#define TEMP_2_PIN -1
|
|
#define SDPOWER -1
|
|
#define SDSS 4
|
|
#define HEATER_2_PIN -1
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef KNOWN_BOARD
|
|
#error Unknown MOTHERBOARD value in configuration.h
|
|
#endif
|
|
|
|
//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
|
|
#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN
|
|
#if EXTRUDERS == 3
|
|
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN
|
|
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN
|
|
#elif EXTRUDERS == 2
|
|
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN
|
|
#define _E2_PINS -1
|
|
#elif EXTRUDERS == 1
|
|
#define _E1_PINS -1
|
|
#define _E2_PINS -1
|
|
#else
|
|
#error Unsupported number of extruders
|
|
#endif
|
|
#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, LED_PIN, PS_ON_PIN, \
|
|
HEATER_0_PIN, HEATER_1_PIN, HEATER_2_PIN, \
|
|
HEATER_BED_PIN, FAN_PIN, \
|
|
_E0_PINS, _E1_PINS, _E2_PINS, \
|
|
TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN, TEMP_BED_PIN }
|
|
#endif
|