391 lines
30 KiB
C
391 lines
30 KiB
C
/**
|
||
* Marlin 3D Printer Firmware
|
||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||
*
|
||
* Based on Sprinter and grbl.
|
||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||
*
|
||
* This program is free software: you can redistribute it and/or modify
|
||
* it under the terms of the GNU General Public License as published by
|
||
* the Free Software Foundation, either version 3 of the License, or
|
||
* (at your option) any later version.
|
||
*
|
||
* This program is distributed in the hope that it will be useful,
|
||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
* GNU General Public License for more details.
|
||
*
|
||
* You should have received a copy of the GNU General Public License
|
||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
*
|
||
*/
|
||
|
||
/**
|
||
* Simplified Chinese
|
||
*
|
||
* LCD Menu Messages
|
||
* See also http://marlinfw.org/docs/development/lcd_language.html
|
||
*
|
||
*/
|
||
#ifndef LANGUAGE_ZH_CN_H
|
||
#define LANGUAGE_ZH_CN_H
|
||
|
||
//#define TALL_FONT_CORRECTION (1)
|
||
|
||
#define CHARSIZE 3
|
||
|
||
#define WELCOME_MSG MACHINE_NAME _UxGT("已就绪.") //" ready."
|
||
#define MSG_BACK _UxGT("返回") // ”Back“
|
||
#define MSG_SD_INSERTED _UxGT("存储卡已插入") //"Card inserted"
|
||
#define MSG_SD_REMOVED _UxGT("存储卡被拔出") //"Card removed"
|
||
#define MSG_LCD_ENDSTOPS _UxGT("挡块") //"Endstops" // Max length 8 characters
|
||
#define MSG_MAIN _UxGT("主菜单") //"Main"
|
||
#define MSG_AUTOSTART _UxGT("自动开始") //"Autostart"
|
||
#define MSG_DISABLE_STEPPERS _UxGT("关闭步进电机") //"Disable steppers"
|
||
#define MSG_DEBUG_MENU _UxGT("调试菜单") // "Debug Menu"
|
||
#define MSG_PROGRESS_BAR_TEST _UxGT("进度条测试") // "Progress Bar Test"
|
||
#define MSG_AUTO_HOME _UxGT("回原点") //"Auto home"
|
||
#define MSG_AUTO_HOME_X _UxGT("回X原位") //"Home X"
|
||
#define MSG_AUTO_HOME_Y _UxGT("回Y原位") //"Home Y"
|
||
#define MSG_AUTO_HOME_Z _UxGT("回Z原位") //"Home Z"
|
||
#define MSG_LEVEL_BED_HOMING _UxGT("平台调平XYZ归原位") //"Homing XYZ"
|
||
#define MSG_LEVEL_BED_WAITING _UxGT("单击开始热床调平") //"Click to Begin"
|
||
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("下个热床调平点") //"Next Point"
|
||
#define MSG_LEVEL_BED_DONE _UxGT("完成热床调平") //"Leveling Done!"
|
||
#define MSG_Z_FADE_HEIGHT _UxGT("淡出高度") // "Fade Height"
|
||
#define MSG_SET_HOME_OFFSETS _UxGT("设置原点偏移") //"Set home offsets"
|
||
#define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已启用") //"Offsets applied"
|
||
#define MSG_SET_ORIGIN _UxGT("设置原点") //"Set origin"
|
||
#define MSG_PREHEAT_1 _UxGT("预热PLA") //"Preheat PLA"
|
||
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " "
|
||
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All"
|
||
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 热床") //MSG_PREHEAT_1 " Bed"
|
||
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 设置") //MSG_PREHEAT_1 " conf"
|
||
#define MSG_PREHEAT_2 _UxGT("预热ABS") //"Preheat ABS"
|
||
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " "
|
||
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All"
|
||
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 热床") //MSG_PREHEAT_2 " Bed"
|
||
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" 设置") //MSG_PREHEAT_2 " conf"
|
||
#define MSG_COOLDOWN _UxGT("降温") //"Cooldown"
|
||
#define MSG_SWITCH_PS_ON _UxGT("电源打开") //"Switch power on"
|
||
#define MSG_SWITCH_PS_OFF _UxGT("电源关闭") //"Switch power off"
|
||
#define MSG_EXTRUDE _UxGT("挤出") //"Extrude"
|
||
#define MSG_RETRACT _UxGT("回抽") //"Retract"
|
||
#define MSG_MOVE_AXIS _UxGT("移动轴") //"Move axis"
|
||
#define MSG_BED_LEVELING _UxGT("调平热床") //"Bed leveling"
|
||
#define MSG_LEVEL_BED _UxGT("调平热床") //"Level bed"
|
||
#define MSG_LEVEL_CORNERS _UxGT("调平边角") // "Level corners"
|
||
|
||
#define MSG_NEXT_CORNER _UxGT("下个边角") // "Next corner"
|
||
#define MSG_EDITING_STOPPED _UxGT("网格编辑已停止") // "Mesh Editing Stopped"
|
||
|
||
#define MSG_USER_MENU _UxGT("定制命令") // "Custom Commands"
|
||
#define MSG_UBL_DOING_G29 _UxGT("执行G29") // "Doing G29"
|
||
#define MSG_UBL_UNHOMED _UxGT("先回XYZ原点") // "Home XYZ first"
|
||
#define MSG_UBL_TOOLS _UxGT("UBL工具") // "UBL Tools"
|
||
#define MSG_UBL_LEVEL_BED _UxGT("统一热床调平(UBL)") // "Unified Bed Leveling"
|
||
#define MSG_UBL_MANUAL_MESH _UxGT("手工创设网格") // "Manually Build Mesh"
|
||
|
||
#define MSG_UBL_BC_INSERT _UxGT("放置垫片并测量") // "Place shim & measure"
|
||
#define MSG_UBL_BC_INSERT2 _UxGT("测量") // "Measure"
|
||
#define MSG_UBL_BC_REMOVE _UxGT("移除并测量热床") // "Remove & measure bed"
|
||
#define MSG_UBL_MOVING_TO_NEXT _UxGT("移动到下一个") // "Moving to next"
|
||
#define MSG_UBL_ACTIVATE_MESH _UxGT("激活UBL") // "Activate UBL"
|
||
#define MSG_UBL_DEACTIVATE_MESH _UxGT("关闭UBL") // "Deactivate UBL"
|
||
#define MSG_UBL_SET_BED_TEMP _UxGT("设置热床温度") // "Bed Temp"
|
||
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("热端温度") // "Hotend Temp"
|
||
#define MSG_UBL_MESH_EDIT _UxGT("网格编辑") // "Mesh Edit"
|
||
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("编辑客户网格") // "Edit Custom Mesh"
|
||
#define MSG_UBL_FINE_TUNE_MESH _UxGT("细调网格") // "Fine Tuning Mesh"
|
||
#define MSG_UBL_DONE_EDITING_MESH _UxGT("完成编辑网格") // "Done Editing Mesh"
|
||
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("创设客户网格") // "Build Custom Mesh"
|
||
#define MSG_UBL_BUILD_MESH_MENU _UxGT("创设网格") // "Build Mesh"
|
||
#define MSG_UBL_BUILD_PLA_MESH _UxGT("创设PLA网格") // "Build PLA Mesh"
|
||
#define MSG_UBL_BUILD_ABS_MESH _UxGT("创设ABS网格") // "Build ABS Mesh"
|
||
#define MSG_UBL_BUILD_COLD_MESH _UxGT("创设冷网格") // "Build Cold Mesh"
|
||
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("调整网格高度") // "Adjust Mesh Height"
|
||
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("高度合计") // "Height Amount"
|
||
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("批准网格") // "Validate Mesh"
|
||
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("批准PLA网格") // "Validate PLA Mesh"
|
||
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("批准ABS网格") // "Validate ABS Mesh"
|
||
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("批准客户网格") // "Validate Custom Mesh"
|
||
#define MSG_UBL_CONTINUE_MESH _UxGT("继续热床网格") // "Continue Bed Mesh"
|
||
#define MSG_UBL_MESH_LEVELING _UxGT("网格调平") // "Mesh Leveling"
|
||
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("三点调平") // "3-Point Leveling"
|
||
#define MSG_UBL_GRID_MESH_LEVELING _UxGT("格子网格调平") // "Grid Mesh Leveling"
|
||
#define MSG_UBL_MESH_LEVEL _UxGT("调平网格") // "Level Mesh"
|
||
#define MSG_UBL_SIDE_POINTS _UxGT("边点") // "Side Points"
|
||
#define MSG_UBL_MAP_TYPE _UxGT("图类型") // "Map Type"
|
||
#define MSG_UBL_OUTPUT_MAP _UxGT("输出网格图") // "Output Mesh Map"
|
||
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("输出到主机") // "Output for Host"
|
||
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("输出到CSV") // "Output for CSV"
|
||
#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("输出到备份") // "Off Printer Backup"
|
||
#define MSG_UBL_INFO_UBL _UxGT("输出UBL信息") // "Output UBL Info"
|
||
#define MSG_UBL_EDIT_MESH_MENU _UxGT("编辑网格") // "Edit Mesh"
|
||
#define MSG_UBL_FILLIN_AMOUNT _UxGT("填充合计") // "Fill-in Amount"
|
||
#define MSG_UBL_MANUAL_FILLIN _UxGT("手工填充") // "Manual Fill-in"
|
||
#define MSG_UBL_SMART_FILLIN _UxGT("聪明填充") // "Smart Fill-in"
|
||
#define MSG_UBL_FILLIN_MESH _UxGT("填充网格") // "Fill-in Mesh"
|
||
#define MSG_UBL_INVALIDATE_ALL _UxGT("作废所有的") // "Invalidate All"
|
||
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("作废最近的") // "Invalidate Closest"
|
||
#define MSG_UBL_FINE_TUNE_ALL _UxGT("细调所有的") // "Fine Tune All"
|
||
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("细调最近的") // "Fine Tune Closest"
|
||
#define MSG_UBL_STORAGE_MESH_MENU _UxGT("网格存储") // "Mesh Storage"
|
||
#define MSG_UBL_STORAGE_SLOT _UxGT("存储槽") // "Memory Slot"
|
||
#define MSG_UBL_LOAD_MESH _UxGT("装载热床网格") // "Load Bed Mesh"
|
||
#define MSG_UBL_SAVE_MESH _UxGT("保存热床网格") // "Save Bed Mesh"
|
||
#define MSG_MESH_LOADED _UxGT("网格 %i 已装载") // "Mesh %i loaded"
|
||
#define MSG_MESH_SAVED _UxGT("网格 %i 已保存") // "Mesh %i saved"
|
||
#define MSG_NO_STORAGE _UxGT("没有存储") // "No storage"
|
||
#define MSG_UBL_SAVE_ERROR _UxGT("错误: UBL保存") // "Err: UBL Save"
|
||
#define MSG_UBL_RESTORE_ERROR _UxGT("错误: UBL还原") // "Err: UBL Restore"
|
||
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z偏移已停止") // "Z-Offset Stopped"
|
||
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("一步步UBL") // "Step-By-Step UBL"
|
||
|
||
#define MSG_LED_CONTROL _UxGT("灯管控制") // "LED Control")
|
||
#define MSG_LEDS_ON _UxGT("灯亮") // "Lights On")
|
||
#define MSG_LEDS_OFF _UxGT("灯灭") // "Lights Off")
|
||
#define MSG_LED_PRESETS _UxGT("灯预置") // "Light Presets")
|
||
#define MSG_SET_LEDS_RED _UxGT("红") // "Red")
|
||
#define MSG_SET_LEDS_ORANGE _UxGT("橙") // "Orange")
|
||
#define MSG_SET_LEDS_YELLOW _UxGT("黄") // "Yellow")
|
||
#define MSG_SET_LEDS_GREEN _UxGT("绿") // "Green")
|
||
#define MSG_SET_LEDS_BLUE _UxGT("蓝") // "Blue")
|
||
#define MSG_SET_LEDS_INDIGO _UxGT("青") // "Indigo")
|
||
#define MSG_SET_LEDS_VIOLET _UxGT("紫") // "Violet")
|
||
#define MSG_SET_LEDS_WHITE _UxGT("白") // "White")
|
||
#define MSG_SET_LEDS_DEFAULT _UxGT("缺省") // "Default")
|
||
#define MSG_CUSTOM_LEDS _UxGT("定制灯") // "Custom Lights")
|
||
#define MSG_INTENSITY_R _UxGT("红饱和度") // "Red Intensity")
|
||
#define MSG_INTENSITY_G _UxGT("绿饱和度") // "Green Intensity")
|
||
#define MSG_INTENSITY_B _UxGT("蓝饱和度") // "Blue Intensity")
|
||
#define MSG_INTENSITY_W _UxGT("白饱和度") // "White Intensity")
|
||
#define MSG_LED_BRIGHTNESS _UxGT("亮度") // "Brightness")
|
||
#define MSG_MOVING _UxGT("移动 ...") // "Moving...")
|
||
#define MSG_FREE_XY _UxGT("释放 XY") // "Free XY")
|
||
|
||
#define MSG_MOVE_X _UxGT("移动X") //"Move X"
|
||
#define MSG_MOVE_Y _UxGT("移动Y") //"Move Y"
|
||
#define MSG_MOVE_Z _UxGT("移动Z") //"Move Z"
|
||
#define MSG_MOVE_E _UxGT("挤出机") //"Extruder"
|
||
#define MSG_MOVE_01MM _UxGT("移动 0.1 mm") //"Move 0.1mm"
|
||
#define MSG_MOVE_1MM _UxGT("移动 1 mm") //"Move 1mm"
|
||
#define MSG_MOVE_10MM _UxGT("移动 10 mm") //"Move 10mm"
|
||
#define MSG_SPEED _UxGT("速率") //"Speed"
|
||
#define MSG_BED_Z _UxGT("热床Z") //"Bed Z"
|
||
#define MSG_NOZZLE _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 喷嘴") //"Nozzle" 噴嘴
|
||
#define MSG_BED _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 热床") //"Bed"
|
||
#define MSG_FAN_SPEED _UxGT("风扇速率") //"Fan speed"
|
||
#define MSG_EXTRA_FAN_SPEED _UxGT("额外风扇速率") // "Extra fan speed"
|
||
#define MSG_FLOW _UxGT("挤出速率") //"Flow"
|
||
#define MSG_CONTROL _UxGT("控制") //"Control"
|
||
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最小") //" " LCD_STR_THERMOMETER " Min"
|
||
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最大") //" " LCD_STR_THERMOMETER " Max"
|
||
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 因数") //" " LCD_STR_THERMOMETER " Fact"
|
||
#define MSG_AUTOTEMP _UxGT("自动控温") //"Autotemp"
|
||
#define MSG_ON _UxGT("开 ") //"On "
|
||
#define MSG_OFF _UxGT("关 ") //"Off"
|
||
#define MSG_PID_P _UxGT("PID-P") //"PID-P"
|
||
#define MSG_PID_I _UxGT("PID-I") //"PID-I"
|
||
#define MSG_PID_D _UxGT("PID-D") //"PID-D"
|
||
#define MSG_PID_C _UxGT("PID-C") //"PID-C"
|
||
#define MSG_SELECT _UxGT("选择") //"Select"
|
||
#define MSG_ACC _UxGT("加速度") //"Accel" acceleration
|
||
#define MSG_JERK _UxGT("抖动速率") // "Jerk"
|
||
#if IS_KINEMATIC
|
||
#define MSG_VA_JERK _UxGT("A轴抖动速率") //"Va-jerk"
|
||
#define MSG_VB_JERK _UxGT("B轴抖动速率") //"Vb-jerk"
|
||
#define MSG_VC_JERK _UxGT("C轴抖动速率") //"Vc-jerk"
|
||
#else
|
||
#define MSG_VA_JERK _UxGT("X轴抖动速率") //"Vx-jerk"
|
||
#define MSG_VB_JERK _UxGT("Y轴抖动速率") //"Vy-jerk"
|
||
#define MSG_VC_JERK _UxGT("Z轴抖动速率") //"Vz-jerk"
|
||
#endif
|
||
#define MSG_VE_JERK _UxGT("挤出机抖动速率") //"Ve-jerk"
|
||
#define MSG_VELOCITY _UxGT("速度") // "Velocity"
|
||
#define MSG_VMAX _UxGT("最大进料速率") //"Vmax " max_feedrate_mm_s
|
||
#define MSG_VMIN _UxGT("最小进料速率") //"Vmin" min_feedrate_mm_s
|
||
#define MSG_VTRAV_MIN _UxGT("最小移动速率") //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move
|
||
#define MSG_ACCELERATION _UxGT("加速度") // "Acceleration"
|
||
#define MSG_AMAX _UxGT("最大打印加速度") //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||
#define MSG_A_RETRACT _UxGT("收进加速度") //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts
|
||
#define MSG_A_TRAVEL _UxGT("非打印移动加速度") //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
||
#define MSG_STEPS_PER_MM _UxGT("轴步数/mm") //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92
|
||
#if IS_KINEMATIC
|
||
#define MSG_ASTEPS _UxGT("A轴步数/mm") //"Asteps/mm"
|
||
#define MSG_BSTEPS _UxGT("B轴步数/mm") //"Bsteps/mm"
|
||
#define MSG_CSTEPS _UxGT("C轴步数/mm") //"Csteps/mm"
|
||
#else
|
||
#define MSG_ASTEPS _UxGT("X轴步数/mm") //"Xsteps/mm"
|
||
#define MSG_BSTEPS _UxGT("Y轴步数/mm") //"Ysteps/mm"
|
||
#define MSG_CSTEPS _UxGT("Z轴步数/mm") //"Zsteps/mm"
|
||
#endif
|
||
#define MSG_ESTEPS _UxGT("挤出机步数/mm") //"Esteps/mm"
|
||
#define MSG_E1STEPS _UxGT("挤出机1步数/mm") //"E1steps/mm"
|
||
#define MSG_E2STEPS _UxGT("挤出机2步数/mm") //"E2steps/mm"
|
||
#define MSG_E3STEPS _UxGT("挤出机3步数/mm") //"E3steps/mm"
|
||
#define MSG_E4STEPS _UxGT("挤出机4步数/mm") //"E4steps/mm"
|
||
#define MSG_E5STEPS _UxGT("挤出机5步数/mm") //"E5steps/mm"
|
||
#define MSG_TEMPERATURE _UxGT("温度") //"Temperature"
|
||
#define MSG_MOTION _UxGT("运动") //"Motion"
|
||
#define MSG_FILAMENT _UxGT("丝料测容") //"Filament" lcd_control_volumetric_menu
|
||
#define MSG_VOLUMETRIC_ENABLED _UxGT("测容积mm³") //"E in mm3" volumetric_enabled
|
||
#define MSG_FILAMENT_DIAM _UxGT("丝料直径") //"Fil. Dia."
|
||
#define MSG_FILAMENT_UNLOAD _UxGT("卸载 mm") // "Unload mm"
|
||
#define MSG_FILAMENT_LOAD _UxGT("装载 mm") // "Load mm"
|
||
#define MSG_ADVANCE_K _UxGT("Advance K") // "Advance K"
|
||
#define MSG_CONTRAST _UxGT("LCD对比度") //"LCD contrast"
|
||
#define MSG_STORE_EEPROM _UxGT("保存设置") //"Store memory"
|
||
#define MSG_LOAD_EEPROM _UxGT("装载设置") //"Load memory"
|
||
#define MSG_RESTORE_FAILSAFE _UxGT("恢复安全值") //"Restore failsafe"
|
||
#define MSG_INIT_EEPROM _UxGT("初始化设置") // "Initialize EEPROM"
|
||
#define MSG_REFRESH _UxGT("刷新") //"Refresh"
|
||
#define MSG_WATCH _UxGT("信息屏") //"Info screen"
|
||
#define MSG_PREPARE _UxGT("准备") //"Prepare"
|
||
#define MSG_TUNE _UxGT("调整") //"Tune"
|
||
#define MSG_PAUSE_PRINT _UxGT("暂停打印") //"Pause print"
|
||
#define MSG_RESUME_PRINT _UxGT("恢复打印") //"Resume print"
|
||
#define MSG_STOP_PRINT _UxGT("停止打印") //"Stop print"
|
||
#define MSG_CARD_MENU _UxGT("从存储卡上打印") //"Print from SD"
|
||
#define MSG_NO_CARD _UxGT("无存储卡") //"No SD card"
|
||
#define MSG_DWELL _UxGT("休眠中 ...") //"Sleep..."
|
||
#define MSG_USERWAIT _UxGT("点击继续 ...") //"Click to resume..."
|
||
#define MSG_PRINT_PAUSED _UxGT("暫停打印") // "Print paused"
|
||
#define MSG_PRINT_ABORTED _UxGT("已取消打印") //"Print aborted"
|
||
#define MSG_NO_MOVE _UxGT("无移动") //"No move."
|
||
#define MSG_KILLED _UxGT("已杀掉") //"KILLED. "
|
||
#define MSG_STOPPED _UxGT("已停止") //"STOPPED. "
|
||
#define MSG_CONTROL_RETRACT _UxGT("回抽长度mm") //"Retract mm" retract_length, retract length (positive mm)
|
||
#define MSG_CONTROL_RETRACT_SWAP _UxGT("换手回抽长度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change
|
||
#define MSG_CONTROL_RETRACTF _UxGT("回抽速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s)
|
||
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") //"Hop mm" retract_zlift, retract Z-lift
|
||
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回抽恢复长度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering)
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("换手回抽恢复长度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change)
|
||
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回抽恢复后进料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") // "S UnRet V"
|
||
#define MSG_AUTORETRACT _UxGT("自动抽回") //"AutoRetr." autoretract_enabled,
|
||
#define MSG_FILAMENTCHANGE _UxGT("更换丝料") //"Change filament"
|
||
#define MSG_FILAMENTLOAD _UxGT("装载丝料") // "Load filament"
|
||
#define MSG_FILAMENTUNLOAD _UxGT("卸载丝料") // "Unload filament"
|
||
#define MSG_FILAMENTUNLOAD_ALL _UxGT("卸载全部") // "Unload All"
|
||
#define MSG_INIT_SDCARD _UxGT("初始化存储卡") //"Init. SD card"
|
||
#define MSG_CNG_SDCARD _UxGT("更换存储卡") //"Change SD card"
|
||
#define MSG_ZPROBE_OUT _UxGT("Z探针在热床之外") //"Z probe out. bed" Z probe is not within the physical limits
|
||
#define MSG_SKEW_FACTOR _UxGT("偏斜因数") // "Skew Factor"
|
||
#define MSG_BLTOUCH _UxGT("BLTouch") // "BLTouch"
|
||
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch 自检") // "BLTouch Self-Test"
|
||
#define MSG_BLTOUCH_RESET _UxGT("重置BLTouch") // "Reset BLTouch"
|
||
#define MSG_BLTOUCH_DEPLOY _UxGT("部署BLTouch") // "Deploy BLTouch"
|
||
#define MSG_BLTOUCH_STOW _UxGT("装载BLTouch") // "Stow BLTouch"
|
||
#define MSG_HOME _UxGT("归位") //"Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
||
#define MSG_FIRST _UxGT("先") //"first"
|
||
#define MSG_ZPROBE_ZOFFSET _UxGT("Z偏移") //"Z Offset"
|
||
#define MSG_BABYSTEP_X _UxGT("微量调整X轴") //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts
|
||
#define MSG_BABYSTEP_Y _UxGT("微量调整Y轴") //"Babystep Y"
|
||
#define MSG_BABYSTEP_Z _UxGT("微量调整Z轴") //"Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT _UxGT("挡块终止") //"Endstop abort"
|
||
#define MSG_HEATING_FAILED_LCD _UxGT("加热失败") //"Heating failed"
|
||
#define MSG_ERR_REDUNDANT_TEMP _UxGT("错误：REDUNDANT TEMP") //"Err: REDUNDANT TEMP"
|
||
#define MSG_THERMAL_RUNAWAY _UxGT("温控失控") //"THERMAL RUNAWAY"
|
||
#define MSG_ERR_MAXTEMP _UxGT("错误：最高温度") //"Err: MAXTEMP"
|
||
#define MSG_ERR_MINTEMP _UxGT("错误：最低温度") //"Err: MINTEMP"
|
||
#define MSG_ERR_MAXTEMP_BED _UxGT("错误：最高热床温度") //"Err: MAXTEMP BED"
|
||
#define MSG_ERR_MINTEMP_BED _UxGT("错误：最低热床温度") //"Err: MINTEMP BED"
|
||
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
|
||
#define MSG_HALTED _UxGT("打印停机") //"PRINTER HALTED"
|
||
#define MSG_PLEASE_RESET _UxGT("请重置") //"Please reset"
|
||
#define MSG_SHORT_DAY _UxGT("天") //"d" // One character only
|
||
#define MSG_SHORT_HOUR _UxGT("时") //"h" // One character only
|
||
#define MSG_SHORT_MINUTE _UxGT("分") //"m" // One character only
|
||
#define MSG_HEATING _UxGT("加热中 ...") //"Heating..."
|
||
#define MSG_BED_HEATING _UxGT("加热热床中 ...") //"Bed Heating..."
|
||
#define MSG_DELTA_CALIBRATE _UxGT("⊿校准") //"Delta Calibration"
|
||
#define MSG_DELTA_CALIBRATE_X _UxGT("⊿校准X") //"Calibrate X"
|
||
#define MSG_DELTA_CALIBRATE_Y _UxGT("⊿校准Y") //"Calibrate Y"
|
||
#define MSG_DELTA_CALIBRATE_Z _UxGT("⊿校准Z") //"Calibrate Z"
|
||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("⊿校准中心") //"Calibrate Center"
|
||
#define MSG_DELTA_SETTINGS _UxGT("⊿设置") // "Delta Settings"
|
||
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("⊿自动校准") // "Auto Calibration"
|
||
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("设置⊿高度") // "Set Delta Height"
|
||
#define MSG_DELTA_DIAG_ROD _UxGT("⊿斜柱") // "Diag Rod"
|
||
#define MSG_DELTA_HEIGHT _UxGT("⊿高度") // "Height"
|
||
#define MSG_DELTA_RADIUS _UxGT("⊿半径") // "Radius"
|
||
#define MSG_INFO_MENU _UxGT("关于打印机") //"About Printer"
|
||
#define MSG_INFO_PRINTER_MENU _UxGT("打印机信息") //"Printer Info"
|
||
#define MSG_3POINT_LEVELING _UxGT("三点调平") // "3-Point Leveling"
|
||
#define MSG_LINEAR_LEVELING _UxGT("线性调平") // "Linear Leveling"
|
||
#define MSG_BILINEAR_LEVELING _UxGT("双线性调平") // "Bilinear Leveling"
|
||
#define MSG_UBL_LEVELING _UxGT("统一热床调平(UBL)") // "Unified Bed Leveling"
|
||
#define MSG_MESH_LEVELING _UxGT("网格调平") // "Mesh Leveling"
|
||
#define MSG_INFO_STATS_MENU _UxGT("打印机统计") //"Printer Stats"
|
||
#define MSG_INFO_BOARD_MENU _UxGT("主板信息") //"Board Info"
|
||
#define MSG_INFO_THERMISTOR_MENU _UxGT("温度计") //"Thermistors"
|
||
#define MSG_INFO_EXTRUDERS _UxGT("挤出机") //"Extruders"
|
||
#define MSG_INFO_BAUDRATE _UxGT("波特率") //"Baud"
|
||
#define MSG_INFO_PROTOCOL _UxGT("协议") //"Protocol"
|
||
#define MSG_CASE_LIGHT _UxGT("外壳灯") // "Case light"
|
||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("灯亮度") // "Light BRIGHTNESS"
|
||
|
||
#if LCD_WIDTH > 19
|
||
#define MSG_INFO_PRINT_COUNT _UxGT("打印计数") //"Print Count"
|
||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成了") //"Completed"
|
||
#define MSG_INFO_PRINT_TIME _UxGT("总打印时间") //"Total print time"
|
||
#define MSG_INFO_PRINT_LONGEST _UxGT("最长工作时间") //"Longest job time"
|
||
#define MSG_INFO_PRINT_FILAMENT _UxGT("总计挤出") //"Extruded total"
|
||
#else
|
||
#define MSG_INFO_PRINT_COUNT _UxGT("打印数") //"Prints"
|
||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed"
|
||
#define MSG_INFO_PRINT_TIME _UxGT("总共") //"Total"
|
||
#define MSG_INFO_PRINT_LONGEST _UxGT("最长") //"Longest"
|
||
#define MSG_INFO_PRINT_FILAMENT _UxGT("已挤出") //"Extruded"
|
||
#endif
|
||
|
||
#define MSG_INFO_MIN_TEMP _UxGT("最低温度") //"Min Temp"
|
||
#define MSG_INFO_MAX_TEMP _UxGT("最高温度") //"Max Temp"
|
||
#define MSG_INFO_PSU _UxGT("电源供应") //"Power Supply"
|
||
#define MSG_DRIVE_STRENGTH _UxGT("驱动力度") // "Drive Strength"
|
||
#define MSG_DAC_PERCENT _UxGT("驱动 %") // "Driver %"
|
||
#define MSG_DAC_EEPROM_WRITE _UxGT("保存驱动设置") // "DAC EEPROM Write"
|
||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("打印已暂停") // "PRINT PAUSED"
|
||
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("装载丝料") // "LOAD FILAMENT"
|
||
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("卸载丝料") // "UNLOAD FILAMENT"
|
||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("恢复选项:") // "RESUME OPTIONS:"
|
||
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("清除更多") // "Purge more"
|
||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢复打印") //"Resume print"
|
||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" 喷嘴: ") // " Nozzle: "
|
||
#define MSG_ERR_HOMING_FAILED _UxGT("归原位失败") // "Homing failed"
|
||
#define MSG_ERR_PROBING_FAILED _UxGT("探针探测失败") // "Probing failed"
|
||
#define MSG_M600_TOO_COLD _UxGT("M600: 太凉") // "M600: Too cold"
|
||
|
||
#if LCD_HEIGHT >= 4
|
||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待开始") //"Wait for start"
|
||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("丝料") //"of the filament"
|
||
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("变更") //"change"
|
||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for"
|
||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下丝料") //"filament unload"
|
||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入丝料") //"Insert filament"
|
||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("并按键") //"and press button"
|
||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("来继续 ...") //"to continue..."
|
||
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("按下按钮来") // "Press button to"
|
||
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("加热喷嘴.") // "heat nozzle."
|
||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热喷嘴") // "Heating nozzle"
|
||
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("请等待 ...") // "Please wait..."
|
||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
|
||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("进料") //"filament load"
|
||
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("等待") // "Wait for"
|
||
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("丝料清除") // "filament purge"
|
||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待打印") //"Wait for print"
|
||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢复") //"to resume"
|
||
|
||
#else // LCD_HEIGHT < 4
|
||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("请等待 ...") //"Please wait..."
|
||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
|
||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入并单击") //"Insert and Click"
|
||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热中 ...") // "Heating..."
|
||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("装载中 ...") //"Loading..."
|
||
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..."
|
||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢复中 ...") //"Resuming..."
|
||
#endif // LCD_HEIGHT < 4
|
||
|
||
#endif // LANGUAGE_ZH_CN_H
|