245 lines
13 KiB
C
245 lines
13 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Polish
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
|
*
|
|
*/
|
|
#ifndef LANGUAGE_PL_H
|
|
#define LANGUAGE_PL_H
|
|
|
|
#define DISPLAY_CHARSET_ISO10646_1
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " gotowy."
|
|
#define MSG_SD_INSERTED "Karta wlozona"
|
|
#define MSG_SD_REMOVED "Karta usunieta"
|
|
#define MSG_LCD_ENDSTOPS "Krancow." // Max length 8 characters
|
|
#define MSG_MAIN "Menu glowne"
|
|
#define MSG_AUTOSTART "Autostart"
|
|
#define MSG_DISABLE_STEPPERS "Wylacz silniki"
|
|
#define MSG_AUTO_HOME "Pozycja zerowa"
|
|
#define MSG_AUTO_HOME_X "Home X"
|
|
#define MSG_AUTO_HOME_Y "Home Y"
|
|
#define MSG_AUTO_HOME_Z "Home Z"
|
|
#define MSG_LEVEL_BED_HOMING "Pozycja zerowa"
|
|
#define MSG_LEVEL_BED_WAITING "Kliknij by rozp."
|
|
#define MSG_LEVEL_BED_NEXT_POINT "Nastepny punkt"
|
|
#define MSG_LEVEL_BED_DONE "Wypoziomowano!"
|
|
#define MSG_LEVEL_BED_CANCEL "Anuluj"
|
|
#define MSG_SET_HOME_OFFSETS "Ust. poz. zer."
|
|
#define MSG_HOME_OFFSETS_APPLIED "Poz. zerowa ust."
|
|
#define MSG_SET_ORIGIN "Ustaw punkt zero"
|
|
#define MSG_PREHEAT_1 "Rozgrzej PLA"
|
|
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
|
|
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " All"
|
|
#define MSG_PREHEAT_1_BEDONLY "Rozgrzej stol PLA"
|
|
#define MSG_PREHEAT_1_SETTINGS "Ustaw. rozg. PLA"
|
|
#define MSG_PREHEAT_2 "Rozgrzej ABS"
|
|
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
|
|
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " All"
|
|
#define MSG_PREHEAT_2_BEDONLY "Rozgrzej stol ABS"
|
|
#define MSG_PREHEAT_2_SETTINGS "Ustaw. rozg. ABS"
|
|
#define MSG_COOLDOWN "Chlodzenie"
|
|
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
|
|
#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
|
|
#define MSG_EXTRUDE "Ekstruzja"
|
|
#define MSG_RETRACT "Wycofanie"
|
|
#define MSG_MOVE_AXIS "Ruch osi"
|
|
#define MSG_LEVEL_BED "Poziom. stolu"
|
|
#define MSG_MOVE_X "Przesun w X"
|
|
#define MSG_MOVE_Y "Przesun w Y"
|
|
#define MSG_MOVE_Z "Przesun w Z"
|
|
#define MSG_MOVE_E "Ekstruzja (os E)"
|
|
#define MSG_MOVE_01MM "Przesun co .1mm"
|
|
#define MSG_MOVE_1MM "Przesun co 1mm"
|
|
#define MSG_MOVE_10MM "Przesun co 10mm"
|
|
#define MSG_SPEED "Predkosc"
|
|
#define MSG_BED_Z "Stol Z"
|
|
#define MSG_NOZZLE "Dysza"
|
|
#define MSG_BED "Stol"
|
|
#define MSG_FAN_SPEED "Obroty wiatraka"
|
|
#define MSG_FLOW "Przeplyw"
|
|
#define MSG_CONTROL "Ustawienia"
|
|
#define MSG_MIN LCD_STR_THERMOMETER " Min"
|
|
#define MSG_MAX LCD_STR_THERMOMETER " Max"
|
|
#define MSG_FACTOR LCD_STR_THERMOMETER " Mnoznik"
|
|
#define MSG_AUTOTEMP "Auto. temperatura"
|
|
#define MSG_ON "Wl. "
|
|
#define MSG_OFF "Wyl."
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_SELECT "Select"
|
|
#define MSG_ACC "Przyspieszenie"
|
|
#define MSG_VX_JERK "Zryw Vx"
|
|
#define MSG_VY_JERK "Zryw Vy"
|
|
#define MSG_VZ_JERK "Zryw Vz"
|
|
#define MSG_VE_JERK "Zryw Ve"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "Vskok min"
|
|
#define MSG_AMAX "Amax"
|
|
#define MSG_A_RETRACT "A-wycofanie"
|
|
#define MSG_A_TRAVEL "A-przesun."
|
|
#define MSG_XSTEPS "krokiX/mm"
|
|
#define MSG_YSTEPS "krokiY/mm"
|
|
#define MSG_ZSTEPS "krokiZ/mm"
|
|
#define MSG_ESTEPS "krokiE/mm"
|
|
#define MSG_TEMPERATURE "Temperatura"
|
|
#define MSG_MOTION "Ruch"
|
|
#define MSG_VOLUMETRIC "Filament"
|
|
#define MSG_VOLUMETRIC_ENABLED "E w mm3"
|
|
#define MSG_FILAMENT_DIAM "Śr. fil."
|
|
#define MSG_CONTRAST "Kontrast LCD"
|
|
#define MSG_STORE_EPROM "Zapisz w pamieci"
|
|
#define MSG_LOAD_EPROM "Wczytaj z pamieci"
|
|
#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"
|
|
#define MSG_REFRESH "Odswiez"
|
|
#define MSG_WATCH "Ekran glowny"
|
|
#define MSG_PREPARE "Przygotuj"
|
|
#define MSG_TUNE "Strojenie"
|
|
#define MSG_PAUSE_PRINT "Pauza"
|
|
#define MSG_RESUME_PRINT "Wznowienie"
|
|
#define MSG_STOP_PRINT "Stop"
|
|
#define MSG_CARD_MENU "Menu karty SD"
|
|
#define MSG_NO_CARD "Brak karty"
|
|
#define MSG_DWELL "Uspij..."
|
|
#define MSG_USERWAIT "Oczekiwanie..."
|
|
#define MSG_RESUMING "Wznawianie druku"
|
|
#define MSG_PRINT_ABORTED "Druk przerwany"
|
|
#define MSG_NO_MOVE "Brak ruchu"
|
|
#define MSG_KILLED "Ubity. "
|
|
#define MSG_STOPPED "Zatrzymany. "
|
|
#define MSG_CONTROL_RETRACT "Wycofaj mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm"
|
|
#define MSG_CONTROL_RETRACTF "Wycofaj V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V"
|
|
#define MSG_AUTORETRACT "Auto. wycofanie"
|
|
#define MSG_FILAMENTCHANGE "Zmien filament"
|
|
#define MSG_INIT_SDCARD "Inicjal. karty SD"
|
|
#define MSG_CNG_SDCARD "Zmiana karty SD"
|
|
#define MSG_ZPROBE_OUT "Sonda Z za stolem"
|
|
#define MSG_BLTOUCH_SELFTEST "BLTouch Self-Test"
|
|
#define MSG_BLTOUCH_RESET "Reset BLTouch"
|
|
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
|
#define MSG_FIRST "first"
|
|
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Blad krancowki"
|
|
#define MSG_HEATING_FAILED_LCD "Rozgrz. nieudane"
|
|
#define MSG_ERR_REDUNDANT_TEMP "Blad temperatury"
|
|
#define MSG_THERMAL_RUNAWAY "Zanik temp."
|
|
#define MSG_ERR_MAXTEMP "Err: max. temp."
|
|
#define MSG_ERR_MINTEMP "Err: min. temp."
|
|
#define MSG_ERR_MAXTEMP_BED "Err: max. temp. loza"
|
|
#define MSG_ERR_MINTEMP_BED "Err: min. temp. loza"
|
|
#define MSG_ERR_Z_HOMING "G28 Z Forbidden"
|
|
#define MSG_HALTED "PRINTER HALTED"
|
|
#define MSG_PLEASE_RESET "Please reset"
|
|
#define MSG_SHORT_DAY "d" // One character only
|
|
#define MSG_SHORT_HOUR "h" // One character only
|
|
#define MSG_SHORT_MINUTE "m" // One character only
|
|
#define MSG_HEATING "Rozgrzewanie..."
|
|
#define MSG_HEATING_COMPLETE "Rozgrzano"
|
|
#define MSG_BED_HEATING "Rozgrzewanie stolu..."
|
|
#define MSG_BED_DONE "Rozgrzano stol"
|
|
#define MSG_DELTA_CALIBRATE "Kalibrowanie Delty"
|
|
#define MSG_DELTA_CALIBRATE_X "Kalibruj X"
|
|
#define MSG_DELTA_CALIBRATE_Y "Kalibruj Y"
|
|
#define MSG_DELTA_CALIBRATE_Z "Kalibruj Z"
|
|
#define MSG_DELTA_CALIBRATE_CENTER "Kalibruj środek"
|
|
|
|
#define MSG_INFO_MENU "About Printer"
|
|
#define MSG_INFO_PRINTER_MENU "Printer Info"
|
|
#define MSG_INFO_STATS_MENU "Printer Stats"
|
|
#define MSG_INFO_BOARD_MENU "Board Info"
|
|
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
|
|
#define MSG_INFO_EXTRUDERS "Extruders"
|
|
#define MSG_INFO_BAUDRATE "Baud"
|
|
#define MSG_INFO_PROTOCOL "Protocol"
|
|
#define MSG_LIGHTS_ON "Case light on"
|
|
#define MSG_LIGHTS_OFF "Case light off"
|
|
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_INFO_PRINT_COUNT "Print Count"
|
|
#define MSG_INFO_COMPLETED_PRINTS "Completed"
|
|
#define MSG_INFO_PRINT_TIME "Total print time"
|
|
#define MSG_INFO_PRINT_LONGEST "Longest job time"
|
|
#define MSG_INFO_PRINT_FILAMENT "Extruded total"
|
|
#else
|
|
#define MSG_INFO_PRINT_COUNT "Prints"
|
|
#define MSG_INFO_COMPLETED_PRINTS "Completed"
|
|
#define MSG_INFO_PRINT_TIME "Total"
|
|
#define MSG_INFO_PRINT_LONGEST "Longest"
|
|
#define MSG_INFO_PRINT_FILAMENT "Extruded"
|
|
#endif
|
|
|
|
#define MSG_INFO_MIN_TEMP "Min Temp"
|
|
#define MSG_INFO_MAX_TEMP "Max Temp"
|
|
#define MSG_INFO_PSU "Power Supply"
|
|
|
|
#define MSG_DRIVE_STRENGTH "Drive Strength"
|
|
#define MSG_DAC_PERCENT "Driver %"
|
|
#define MSG_DAC_EEPROM_WRITE "DAC EEPROM Write"
|
|
#define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT"
|
|
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGE OPTIONS:"
|
|
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude more"
|
|
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resume print"
|
|
#if LCD_HEIGHT >= 4
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 "Wait for start"
|
|
#define MSG_FILAMENT_CHANGE_INIT_2 "of the filament"
|
|
#define MSG_FILAMENT_CHANGE_INIT_3 "change"
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wait for"
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament unload"
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_3 ""
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert filament"
|
|
#define MSG_FILAMENT_CHANGE_INSERT_2 "and press button"
|
|
#define MSG_FILAMENT_CHANGE_INSERT_3 "to continue..."
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wait for"
|
|
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament load"
|
|
#define MSG_FILAMENT_CHANGE_LOAD_3 ""
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wait for"
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrude"
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 ""
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wait for print"
|
|
#define MSG_FILAMENT_CHANGE_RESUME_2 "to resume"
|
|
#define MSG_FILAMENT_CHANGE_RESUME_3 ""
|
|
#else // LCD_HEIGHT < 4
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 "Please wait..."
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejecting..."
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert and Click"
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 "Loading..."
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruding..."
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 "Resuming..."
|
|
#endif // LCD_HEIGHT < 4
|
|
|
|
#endif // LANGUAGE_PL_H
|