muele-marlin/Marlin/src/feature/powerloss.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * feature/powerloss.h - Resume an SD print after power-loss
 */

#include "../sd/cardreader.h"
#include "../gcode/gcode.h"

#include "../inc/MarlinConfig.h"

#if ENABLED(GCODE_REPEAT_MARKERS)
  #include "../feature/repeat.h"
#endif

#if ENABLED(MIXING_EXTRUDER)
  #include "../feature/mixing.h"
#endif

#if !defined(POWER_LOSS_STATE) && PIN_EXISTS(POWER_LOSS)
  #define POWER_LOSS_STATE HIGH
#endif

//#define DEBUG_POWER_LOSS_RECOVERY
//#define SAVE_EACH_CMD_MODE
//#define SAVE_INFO_INTERVAL_MS 0

typedef struct {
  uint8_t valid_head;

  // Machine state
  xyze_pos_t current_position;
  uint16_t feedrate;
  float zraise;

  // Repeat information
  TERN_(GCODE_REPEAT_MARKERS, Repeat stored_repeat);

  TERN_(HAS_HOME_OFFSET,    xyz_pos_t home_offset);
  TERN_(HAS_POSITION_SHIFT, xyz_pos_t position_shift);
  TERN_(HAS_MULTI_EXTRUDER, uint8_t active_extruder);

  #if DISABLED(NO_VOLUMETRICS)
    bool volumetric_enabled;
    float filament_size[EXTRUDERS];
  #endif

  TERN_(HAS_HOTEND,     int16_t target_temperature[HOTENDS]);
  TERN_(HAS_HEATED_BED, int16_t target_temperature_bed);
  TERN_(HAS_FAN,        uint8_t fan_speed[FAN_COUNT]);

  TERN_(HAS_LEVELING, float fade);

  #if ENABLED(FWRETRACT)
    float retract[EXTRUDERS], retract_hop;
  #endif

  // Mixing extruder and gradient
  #if ENABLED(MIXING_EXTRUDER)
    //uint_fast8_t selected_vtool;
    //mixer_comp_t color[NR_MIXING_VIRTUAL_TOOLS][MIXING_STEPPERS];
    TERN_(GRADIENT_MIX, gradient_t gradient);
  #endif

  // SD Filename and position
  char sd_filename[MAXPATHNAMELENGTH];
  volatile uint32_t sdpos;

  // Job elapsed time
  millis_t print_job_elapsed;

  // Relative axis modes
  uint8_t axis_relative;

  // Misc. Marlin flags
  struct {
    bool dryrun:1;                // M111 S8
    bool allow_cold_extrusion:1;  // M302 P1
    TERN_(HAS_LEVELING, bool leveling:1);
  } flag;

  uint8_t valid_foot;

  bool valid() { return valid_head && valid_head == valid_foot; }

} job_recovery_info_t;

class PrintJobRecovery {
  public:
    static const char filename[5];

    static SdFile file;
    static job_recovery_info_t info;

    static uint8_t queue_index_r;     //!< Queue index of the active command
    static uint32_t cmd_sdpos,        //!< SD position of the next command
                    sdpos[BUFSIZE];   //!< SD positions of queued commands

    #if ENABLED(DWIN_CREALITY_LCD)
      static bool dwin_flag;
    #endif

    static void init();
    static void prepare();

    static inline void setup() {
      #if PIN_EXISTS(POWER_LOSS)
        #if ENABLED(POWER_LOSS_PULLUP)
          SET_INPUT_PULLUP(POWER_LOSS_PIN);
        #elif ENABLED(POWER_LOSS_PULLDOWN)
          SET_INPUT_PULLDOWN(POWER_LOSS_PIN);
        #else
          SET_INPUT(POWER_LOSS_PIN);
        #endif
      #endif
    }

    // Track each command's file offsets
    static inline uint32_t command_sdpos() { return sdpos[queue_index_r]; }
    static inline void commit_sdpos(const uint8_t index_w) { sdpos[index_w] = cmd_sdpos; }

    static bool enabled;
    static void enable(const bool onoff);
    static void changed();

    static inline bool exists() { return card.jobRecoverFileExists(); }
    static inline void open(const bool read) { card.openJobRecoveryFile(read); }
    static inline void close() { file.close(); }

    static void check();
    static void resume();
    static void purge();

    static inline void cancel() { purge(); IF_DISABLED(NO_SD_AUTOSTART, card.autofile_begin()); }

    static void load();
    static void save(const bool force=ENABLED(SAVE_EACH_CMD_MODE), const float zraise=0);

    #if PIN_EXISTS(POWER_LOSS)
      static inline void outage() {
        if (enabled && READ(POWER_LOSS_PIN) == POWER_LOSS_STATE)
          _outage();
      }
    #endif

    // The referenced file exists
    static inline bool interrupted_file_exists() { return card.fileExists(info.sd_filename); }

    static inline bool valid() { return info.valid() && interrupted_file_exists(); }

    #if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
      static void debug(PGM_P const prefix);
    #else
      static inline void debug(PGM_P const) {}
    #endif

  private:
    static void write();

    #if ENABLED(BACKUP_POWER_SUPPLY)
      static void retract_and_lift(const float &zraise);
    #endif

    #if PIN_EXISTS(POWER_LOSS)
      friend class GcodeSuite;
      static void _outage();
    #endif
};

extern PrintJobRecovery recovery;