History

Scott Lahteine 7a04eb3a8b Fix some comment formatting		2018-10-23 22:35:44 -05:00
..
EEPROM_Emul	Adjust some HAL formatting	2018-09-30 21:24:37 -05:00
EmulatedEeprom.cpp	Use uint8_t in EEPROM code	2018-10-09 19:00:01 -05:00
endstop_interrupts.h	Add support for Triple-Z steppers/endstops	2018-09-16 00:35:58 -05:00
fastio_STM32F7.h	Correct PWM_PIN behavior for STM32 HALs (#12027 )	2018-10-07 17:08:01 -05:00
HAL.cpp	Use a macro for HAL header redirection (#10380 )	2018-04-12 20:25:08 -05:00
HAL.h	Use uint8_t in EEPROM code	2018-10-09 19:00:01 -05:00
HAL_Servo_STM32F7.cpp	delay(SERVO_DELAY) => safe_delay(servo_delay[servo_index])	2018-05-28 03:44:32 -05:00
HAL_Servo_STM32F7.h	Add support for STM32F7 MCU	2018-01-15 01:13:03 -06:00
HAL_spi_STM32F7.cpp	Updates to STM32F7 HAL, for completeness (#11770 )	2018-09-09 03:26:15 -05:00
HAL_timers_STM32F7.cpp	Updates to STM32F7 HAL, for completeness (#11770 )	2018-09-09 03:26:15 -05:00
HAL_timers_STM32F7.h	Updates to STM32F7 HAL, for completeness (#11770 )	2018-09-09 03:26:15 -05:00
persistent_store_eeprom.cpp	Use uint8_t in EEPROM code	2018-10-09 19:00:01 -05:00
pinsDebug.h	Use a macro for HAL header redirection (#10380 )	2018-04-12 20:25:08 -05:00
README.md	Clean up trailing whitespace	2018-01-21 17:19:38 -06:00
SanityCheck.h	Code changes supporting up to 6 extruders	2018-09-16 22:32:53 -05:00
spi_pins.h	Fix some comment formatting	2018-10-23 22:35:44 -05:00
TMC2660.cpp	Corrections for dylsexic TMC	2018-09-29 18:51:11 -05:00
TMC2660.h	Corrections for dylsexic TMC	2018-09-29 18:51:11 -05:00
watchdog_STM32F7.cpp	Cleanups for STM32F7	2018-01-15 02:46:37 -06:00
watchdog_STM32F7.h	Fix some header comments	2018-07-17 19:50:24 -05:00

README.md

This HAL is for the STM32F765 board "The Borg" used with STM32Generic Arduino core by danieleff.

Original core is located at:

https://github.com/danieleff/STM32GENERIC

but i have not committed the changes needed for the Borg there yet, so please use:

https://github.com/Spawn32/STM32GENERIC

Unzip it into [Arduino]/hardware folder

Download the latest GNU ARM Embedded Toolchain:

https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads

(The one in Arduino dosen't support STM32F7).

Change compiler.path in platform.txt to point to that you downloaded.

This HAL is in development.

Currently only tested on "The Borg".

You will also need the latest Arduino 1.9.0-beta or newer.

This HAL is a modified version of Chris Barr's Picoprint STM32F4 HAL, so shouldn't be to hard to get it to work on a F4.