175 lines
9 KiB
C
175 lines
9 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* German
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
|
*
|
|
*/
|
|
#ifndef LANGUAGE_DE_H
|
|
#define LANGUAGE_DE_H
|
|
|
|
#define MAPPER_C2C3
|
|
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
|
|
//#define SIMULATE_ROMFONT
|
|
#define DISPLAY_CHARSET_ISO10646_1
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " bereit."
|
|
#define MSG_SD_INSERTED "SDKarte erkannt."
|
|
#define MSG_SD_REMOVED "SDKarte entfernt."
|
|
#define MSG_MAIN "Hauptmenü"
|
|
#define MSG_AUTOSTART "Autostart"
|
|
#define MSG_DISABLE_STEPPERS "Motoren Aus" // M84
|
|
#define MSG_AUTO_HOME "Home" // G28
|
|
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
|
|
#define MSG_LEVEL_BED_WAITING "Klick für Start"
|
|
#define MSG_LEVEL_BED_DONE "Fertig"
|
|
#define MSG_LEVEL_BED_CANCEL "Abbruch"
|
|
#define MSG_SET_HOME_OFFSETS "Setze Home hier"
|
|
#define MSG_HOME_OFFSETS_APPLIED "Offsets aktiv"
|
|
#define MSG_SET_ORIGIN "Setze Null hier" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
|
|
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
|
|
#define MSG_PREHEAT_PLA_N "Vorwärmen PLA "
|
|
#define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
|
|
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
|
|
#define MSG_PREHEAT_ABS_N "Vorwärmen ABS "
|
|
#define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
|
|
#define MSG_COOLDOWN "Abkühlen"
|
|
#define MSG_SWITCH_PS_ON "Netzteil Ein"
|
|
#define MSG_SWITCH_PS_OFF "Netzteil Aus"
|
|
#define MSG_EXTRUDE "Extrudieren"
|
|
#define MSG_RETRACT "Retract"
|
|
#define MSG_MOVE_AXIS "Bewegen"
|
|
#define MSG_LEVEL_BED "Bett Korrektur"
|
|
#define MSG_MOVE_X "X"
|
|
#define MSG_MOVE_Y "Y"
|
|
#define MSG_MOVE_Z "Z"
|
|
#define MSG_MOVE_E "E"
|
|
#define MSG_MOVE_01MM " 0.1 mm"
|
|
#define MSG_MOVE_1MM " 1.0 mm"
|
|
#define MSG_MOVE_10MM "10.0 mm"
|
|
#define MSG_SPEED "Geschw."
|
|
#define MSG_BED_Z "Bett Z"
|
|
#define MSG_NOZZLE "Düse"
|
|
#define MSG_BED "Bett"
|
|
#define MSG_FAN_SPEED "Lüftergeschw."
|
|
#define MSG_FLOW "Fluss"
|
|
#define MSG_CONTROL "Einstellungen"
|
|
#define MSG_MIN LCD_STR_THERMOMETER " Min"
|
|
#define MSG_MAX LCD_STR_THERMOMETER " Max"
|
|
#define MSG_FACTOR LCD_STR_THERMOMETER " Faktor"
|
|
#define MSG_AUTOTEMP "AutoTemp"
|
|
#define MSG_ON "Ein"
|
|
#define MSG_OFF "Aus"
|
|
#define MSG_PID_P "PID P"
|
|
#define MSG_PID_I "PID I"
|
|
#define MSG_PID_D "PID D"
|
|
#define MSG_PID_C "PID C"
|
|
#define MSG_ACC "A"
|
|
#define MSG_VXY_JERK "V xy Ruck"
|
|
#define MSG_VZ_JERK "V z Ruck"
|
|
#define MSG_VE_JERK "V e Ruck"
|
|
#define MSG_VMAX "V max " // space by purpose
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "V min"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "A max " // space by purpose
|
|
#define MSG_A_RETRACT "A Retract"
|
|
#define MSG_A_TRAVEL "A Rueckzug"
|
|
#define MSG_XSTEPS "X steps/mm"
|
|
#define MSG_YSTEPS "Y steps/mm"
|
|
#define MSG_ZSTEPS "Z steps/mm"
|
|
#define MSG_ESTEPS "E steps/mm"
|
|
#define MSG_TEMPERATURE "Temperatur"
|
|
#define MSG_MOTION "Bewegung"
|
|
#define MSG_VOLUMETRIC "Filament"
|
|
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
|
|
#define MSG_FILAMENT_DIAM "Filament D"
|
|
#define MSG_CONTRAST "LCD Kontrast"
|
|
#define MSG_STORE_EPROM "EPROM speichern"
|
|
#define MSG_LOAD_EPROM "EPROM laden"
|
|
#define MSG_RESTORE_FAILSAFE "Standardkonfig."
|
|
#define MSG_REFRESH "Aktualisieren"
|
|
#define MSG_WATCH "Info"
|
|
#define MSG_PREPARE "Vorbereitung"
|
|
#define MSG_TUNE "Justierung"
|
|
#define MSG_PAUSE_PRINT "SD-Druck Pause"
|
|
#define MSG_RESUME_PRINT "SD-Druck Weiter"
|
|
#define MSG_STOP_PRINT "SD-Druck Abbruch"
|
|
#define MSG_CARD_MENU "SDKarte"
|
|
#define MSG_NO_CARD "Keine SDKarte"
|
|
#define MSG_DWELL "Warten..."
|
|
#define MSG_USERWAIT "Warte auf Nutzer."
|
|
#define MSG_RESUMING "Druck geht weiter"
|
|
#define MSG_PRINT_ABORTED "Druck abgebrochen"
|
|
#define MSG_NO_MOVE "Motoren Eingesch."
|
|
#define MSG_KILLED "KILLED."
|
|
#define MSG_STOPPED "ANGEHALTEN."
|
|
#define MSG_CONTROL_RETRACT "Retract mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
|
|
#define MSG_CONTROL_RETRACTF "Retract V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
|
#define MSG_AUTORETRACT "AutoRetr."
|
|
#define MSG_FILAMENTCHANGE "Filament wechseln"
|
|
#define MSG_INIT_SDCARD "SDKarte erkennen"// Manually initialize the SD-card via user interface
|
|
#define MSG_CNG_SDCARD "SDKarte erkennen"// SD-card changed by user. For machines with no autocarddetect. Both send "M21"
|
|
#define MSG_ZPROBE_OUT "Sensor ausserhalb"
|
|
#define MSG_YX_UNHOMED "X/Y vor Z homen."
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop Abbr. Ein"
|
|
#define MSG_HEATING_FAILED_LCD "Heizen fehlgesch."
|
|
#define MSG_ERR_REDUNDANT_TEMP "Redund. Temperaturabw."
|
|
#define MSG_THERMAL_RUNAWAY "Temp. n. erreicht"
|
|
#define MSG_ERR_MAXTEMP "Temp. ueberschritten"
|
|
#define MSG_ERR_MINTEMP "Temp. unterschritten"
|
|
#define MSG_ERR_MAXTEMP_BED "Temp. Bett ueberschr."
|
|
#define MSG_ERR_MINTEMP_BED "Temp. Bett unterschr."
|
|
#define MSG_END_HOUR "Stunden"
|
|
#define MSG_END_MINUTE "Minuten"
|
|
#define MSG_HEATING "Aufheizen..."
|
|
#define MSG_HEATING_COMPLETE "Aufgeheizt"
|
|
#define MSG_BED_HEATING "Bett aufheizen"
|
|
#define MSG_BED_DONE "Bett aufgeheizt"
|
|
|
|
#define MSG_DELTA_CALIBRATE "Delta kalibrieren"
|
|
#define MSG_DELTA_CALIBRATE_X "Kalibriere X"
|
|
#define MSG_DELTA_CALIBRATE_Y "Kalibriere Y"
|
|
#define MSG_DELTA_CALIBRATE_Z "Kalibriere Z"
|
|
#define MSG_DELTA_CALIBRATE_CENTER "Kalibriere Mitte"
|
|
|
|
#endif // LANGUAGE_DE_H
|