6843b78f99
The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control. The Pins file for the RevF board is included.
116 lines
3.2 KiB
C++
116 lines
3.2 KiB
C++
/*
|
|
|
|
mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
|
|
For implementation details, please take a look at the datasheet http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
|
|
For discussion and feedback, please go to http://arduino.cc/forum/index.php/topic,51842.0.html
|
|
*/
|
|
|
|
|
|
/* _____PROJECT INCLUDES_____________________________________________________ */
|
|
#include "dac_mcp4728.h"
|
|
|
|
#if ENABLED(DAC_STEPPER_CURRENT)
|
|
|
|
// Used Global variables
|
|
uint16_t mcp4728_values[4];
|
|
|
|
/*
|
|
Begin I2C, get current values (input register and eeprom) of mcp4728
|
|
*/
|
|
void mcp4728_init() {
|
|
Wire.begin();
|
|
Wire.requestFrom(int(DAC_DEV_ADDRESS), 24);
|
|
while(Wire.available()) {
|
|
int deviceID = Wire.receive();
|
|
int hiByte = Wire.receive();
|
|
int loByte = Wire.receive();
|
|
|
|
int isEEPROM = (deviceID & 0B00001000) >> 3;
|
|
int channel = (deviceID & 0B00110000) >> 4;
|
|
if (isEEPROM != 1) {
|
|
mcp4728_values[channel] = word((hiByte & 0B00001111), loByte);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
Write input resister value to specified channel using fastwrite method.
|
|
Channel : 0-3, Values : 0-4095
|
|
*/
|
|
uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value) {
|
|
mcp4728_values[channel] = value;
|
|
return mcp4728_fastWrite();
|
|
}
|
|
/*
|
|
Write all input resistor values to EEPROM using SequencialWrite method.
|
|
This will update both input register and EEPROM value
|
|
This will also write current Vref, PowerDown, Gain settings to EEPROM
|
|
*/
|
|
uint8_t mcp4728_eepromWrite() {
|
|
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
|
Wire.send(SEQWRITE);
|
|
for (uint8_t channel=0; channel <= 3; channel++) {
|
|
Wire.send(DAC_STEPPER_VREF << 7 | 0 << 5 | DAC_STEPPER_GAIN << 4 | highByte(mcp4728_values[channel]));
|
|
Wire.send(lowByte(mcp4728_values[channel]));
|
|
}
|
|
return Wire.endTransmission();
|
|
}
|
|
|
|
/*
|
|
Write Voltage reference setting to all input regiters
|
|
*/
|
|
uint8_t mcp4728_setVref_all(uint8_t value) {
|
|
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
|
Wire.send(VREFWRITE | value << 3 | value << 2 | value << 1 | value);
|
|
return Wire.endTransmission();
|
|
}
|
|
/*
|
|
Write Gain setting to all input regiters
|
|
*/
|
|
uint8_t mcp4728_setGain_all(uint8_t value) {
|
|
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
|
Wire.send(GAINWRITE | value << 3 | value << 2 | value << 1 | value);
|
|
return Wire.endTransmission();
|
|
}
|
|
|
|
/*
|
|
Return Input Regiter value
|
|
*/
|
|
uint16_t mcp4728_getValue(uint8_t channel) { return mcp4728_values[channel]; }
|
|
|
|
/*
|
|
// Steph: Might be useful in the future
|
|
// Return Vout
|
|
uint16_t mcp4728_getVout(uint8_t channel) {
|
|
uint32_t vref = 2048;
|
|
uint32_t vOut = (vref * mcp4728_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096;
|
|
if (vOut > defaultVDD) vOut = defaultVDD;
|
|
return vOut;
|
|
}
|
|
*/
|
|
|
|
/*
|
|
FastWrite input register values - All DAC ouput update. refer to DATASHEET 5.6.1
|
|
DAC Input and PowerDown bits update.
|
|
No EEPROM update
|
|
*/
|
|
uint8_t mcp4728_fastWrite() {
|
|
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
|
for (uint8_t channel=0; channel <= 3; channel++) {
|
|
Wire.send(highByte(mcp4728_values[channel]));
|
|
Wire.send(lowByte(mcp4728_values[channel]));
|
|
}
|
|
return Wire.endTransmission();
|
|
}
|
|
|
|
/*
|
|
Common function for simple general commands
|
|
*/
|
|
uint8_t mcp4728_simpleCommand(byte simpleCommand) {
|
|
Wire.beginTransmission(GENERALCALL);
|
|
Wire.send(simpleCommand);
|
|
return Wire.endTransmission();
|
|
}
|
|
|
|
#endif // DAC_STEPPER_CURRENT
|