248 lines
6.1 KiB
C
248 lines
6.1 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
//
|
|
// Fysetc F6 pin assignments
|
|
//
|
|
|
|
#ifndef __AVR_ATmega2560__
|
|
#error "Oops! Select 'FYSETC F6' in 'Tools > Board.'"
|
|
#endif
|
|
|
|
#if ENABLED(SD_DETECT_INVERTED)
|
|
//#error "SD_DETECT_INVERTED must be disabled for the FYSETC_F6_13 board."
|
|
#endif
|
|
|
|
#define BOARD_NAME "FYSETC F6 1.3"
|
|
|
|
#define RESET_PIN 30
|
|
#define SPI_FLASH_CS 83
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
#define SERVO0_PIN 13
|
|
#define SERVO1_PIN 11 // (PS_ON_PIN)
|
|
#define SERVO2_PIN 10 // (FIL_RUNOUT_PIN)
|
|
#define SERVO3_PIN 4 // (RGB_LED_G_PIN)
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN 63
|
|
#define X_MAX_PIN 64
|
|
#define Y_MIN_PIN 14
|
|
#define Y_MAX_PIN 15
|
|
#define Z_MIN_PIN 12
|
|
#define Z_MAX_PIN 9
|
|
|
|
#ifndef FIL_RUNOUT_PIN
|
|
#define FIL_RUNOUT_PIN SERVO2_PIN
|
|
#endif
|
|
|
|
//
|
|
// Z Probe (when not Z_MIN_PIN)
|
|
//
|
|
#ifndef Z_MIN_PROBE_PIN
|
|
#define Z_MIN_PROBE_PIN 9 // Servos pin
|
|
#endif
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 54
|
|
#define X_DIR_PIN 55
|
|
#define X_ENABLE_PIN 38
|
|
#ifndef X_CS_PIN
|
|
#define X_CS_PIN 70
|
|
#endif
|
|
|
|
#define Y_STEP_PIN 60
|
|
#define Y_DIR_PIN 61
|
|
#define Y_ENABLE_PIN 56
|
|
#ifndef Y_CS_PIN
|
|
#define Y_CS_PIN 39
|
|
#endif
|
|
|
|
#define Z_STEP_PIN 43
|
|
#define Z_DIR_PIN 48
|
|
#define Z_ENABLE_PIN 58
|
|
#ifndef Z_CS_PIN
|
|
#define Z_CS_PIN 74
|
|
#endif
|
|
|
|
#define E0_STEP_PIN 26
|
|
#define E0_DIR_PIN 28
|
|
#define E0_ENABLE_PIN 24
|
|
#ifndef E0_CS_PIN
|
|
#define E0_CS_PIN 47
|
|
#endif
|
|
|
|
#define E1_STEP_PIN 36
|
|
#define E1_DIR_PIN 34
|
|
#define E1_ENABLE_PIN 30
|
|
#ifndef E1_CS_PIN
|
|
#define E1_CS_PIN 32
|
|
#endif
|
|
|
|
#define E2_STEP_PIN 59
|
|
#define E2_DIR_PIN 57
|
|
#define E2_ENABLE_PIN 40
|
|
#ifndef E2_CS_PIN
|
|
#define E2_CS_PIN 42
|
|
#endif
|
|
|
|
//
|
|
// Sensorless homing DIAG pin is not directly connected to the MCU. Close
|
|
// the jumper next to the limit switch socket when using sensorless homing.
|
|
//
|
|
|
|
#if HAS_DRIVER(TMC2208)
|
|
// Software serial
|
|
#define X_SERIAL_RX_PIN 71
|
|
#define X_SERIAL_TX_PIN 72
|
|
#define Y_SERIAL_RX_PIN 73
|
|
#define Y_SERIAL_TX_PIN 75
|
|
#define Z_SERIAL_RX_PIN 78
|
|
#define Z_SERIAL_TX_PIN 79
|
|
#define E0_SERIAL_RX_PIN 76
|
|
#define E0_SERIAL_TX_PIN 77
|
|
#define E1_SERIAL_RX_PIN 80
|
|
#define E1_SERIAL_TX_PIN 81
|
|
#define E2_SERIAL_RX_PIN 22
|
|
#define E2_SERIAL_TX_PIN 82
|
|
#endif
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN 12 // Analog Input
|
|
#define TEMP_1_PIN 13 // Analog Input
|
|
#define TEMP_2_PIN 14 // Analog Input
|
|
#define TEMP_BED_PIN 15 // Analog Input
|
|
|
|
#ifndef FILWIDTH_PIN
|
|
#define FILWIDTH_PIN 9 // Analog Input on X+ endstop
|
|
#endif
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 5
|
|
#define HEATER_1_PIN 6
|
|
#define HEATER_2_PIN 7
|
|
#define HEATER_BED_PIN 8
|
|
|
|
#define FAN_PIN 44
|
|
#define FAN1_PIN 45
|
|
#define FAN2_PIN 46
|
|
|
|
//
|
|
// Misc. Functions
|
|
//
|
|
#define SDSS 53
|
|
#define LED_PIN 13
|
|
#define KILL_PIN 41
|
|
|
|
#ifndef PS_ON_PIN
|
|
#define PS_ON_PIN SERVO1_PIN
|
|
#endif
|
|
|
|
/**
|
|
* ----- -----
|
|
* 5V/D41 | · · | GND 5V | · · | GND
|
|
* RESET | · · | D49 (SD_DETECT) (LCD_D7) D29 | · · | D27 (LCD_D6)
|
|
* (MOSI) D51 | · · | D33 (BTN_EN2) (LCD_D5) D25 | · · | D23 (LCD_D4)
|
|
* (SD_SS) D53 | · · | D31 (BTN_EN1) (LCD_RS) D16 | · · | D17 (LCD_EN)
|
|
* (SCK) D52 | · · | D50 (MISO) (BTN_ENC) D35 | · · | D37 (BEEPER)
|
|
* ----- -----
|
|
* EXP2 EXP1
|
|
*/
|
|
|
|
//
|
|
// LCDs and Controllers
|
|
//
|
|
#define BEEPER_PIN 37
|
|
#define SD_DETECT_PIN 49
|
|
|
|
#if ENABLED(FYSETC_MINI_12864)
|
|
//
|
|
// See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
|
|
//
|
|
#define DOGLCD_A0 16
|
|
#define DOGLCD_CS 17
|
|
|
|
#define LCD_BACKLIGHT_PIN -1
|
|
#define KILL_PIN 41
|
|
|
|
#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
|
|
// Seems to work best if left open.
|
|
|
|
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
|
#ifndef RGB_LED_R_PIN
|
|
#define RGB_LED_R_PIN 25
|
|
#endif
|
|
#ifndef RGB_LED_G_PIN
|
|
#define RGB_LED_G_PIN 27
|
|
#endif
|
|
#ifndef RGB_LED_B_PIN
|
|
#define RGB_LED_B_PIN 29
|
|
#endif
|
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
|
#define NEOPIXEL_PIN 25
|
|
#endif
|
|
|
|
#elif HAS_GRAPHICAL_LCD
|
|
|
|
#define LCD_PINS_RS 16
|
|
#define LCD_PINS_ENABLE 17
|
|
#define LCD_PINS_D4 23
|
|
#define LCD_PINS_D5 25
|
|
#define LCD_PINS_D6 27
|
|
#define LCD_PINS_D7 29
|
|
|
|
#if ENABLED(MKS_MINI_12864)
|
|
#define DOGLCD_CS 25
|
|
#define DOGLCD_A0 27
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#if ENABLED(NEWPANEL)
|
|
#define BTN_EN1 31
|
|
#define BTN_EN2 33
|
|
#define BTN_ENC 35
|
|
#endif
|
|
|
|
#ifndef RGB_LED_R_PIN
|
|
#define RGB_LED_R_PIN 3
|
|
#endif
|
|
#ifndef RGB_LED_G_PIN
|
|
#define RGB_LED_G_PIN 4
|
|
#endif
|
|
#ifndef RGB_LED_B_PIN
|
|
#define RGB_LED_B_PIN 9
|
|
#endif
|
|
#ifndef RGB_LED_W_PIN
|
|
#define RGB_LED_W_PIN -1
|
|
#endif
|