nixpkgs/doc/contributing/submitting-changes.chapter.md

15 KiB
Raw Blame History

Submitting changes

Making patches

  • Read Manual (How to write packages for Nix).

  • Fork the Nixpkgs repository on GitHub.

  • Create a branch for your future fix.

    • You can make branch from a commit of your local nixos-version. That will help you to avoid additional local compilations. Because you will receive packages from binary cache. For example

      $ nixos-version --hash
      0998212
      $ git checkout 0998212
      $ git checkout -b 'fix/pkg-name-update'
      
    • Please avoid working directly on the master branch.

  • Make commits of logical units.

  • If you removed pkgs or made some major NixOS changes, write about it in the release notes for the next stable release. For example nixos/doc/manual/release-notes/rl-2003.xml.

  • Check for unnecessary whitespace with git diff --check before committing.

  • Format the commit in a following way:

    (pkg-name | nixos/<module>): (from -> to | init at version | refactor | etc)
    Additional information.
    
    • Examples:
      • nginx: init at 2.0.1
      • firefox: 54.0.1 -> 55.0
      • nixos/hydra: add bazBaz option
      • nixos/nginx: refactor config generation
  • Test your changes. If you work with

    • nixpkgs:

      • update pkg
        • nix-env -iA pkg-attribute-name -f <path to your local nixpkgs folder>
      • add pkg
        • Make sure its in pkgs/top-level/all-packages.nix
        • nix-env -iA pkg-attribute-name -f <path to your local nixpkgs folder>
      • If you dont want to install pkg in you profile.
        • nix-build -A pkg-attribute-name <path to your local nixpkgs folder> and check results in the folder result. It will appear in the same directory where you did nix-build.
      • If you installed your package with nix-env, you can run nix-env -e pkg-name where pkg-name is as reported by nix-env -q to uninstall it from your system.
    • NixOS and its modules:

      • You can add new module to your NixOS configuration file (usually its /etc/nixos/configuration.nix). And do sudo nixos-rebuild test -I nixpkgs=<path to your local nixpkgs folder> --fast.
  • If you have commits pkg-name: oh, forgot to insert whitespace: squash commits in this case. Use git rebase -i.

  • Rebase your branch against current master.

Submitting changes

Submitting security fixes

Security fixes are submitted in the same way as other changes and thus the same guidelines apply.

  • If a new version fixing the vulnerability has been released, update the package;

  • If the security fix comes in the form of a patch and a CVE is available, then add the patch to the Nixpkgs tree, and apply it to the package. The name of the patch should be the CVE identifier, so e.g. CVE-2019-13636.patch; If a patch is fetched the name needs to be set as well, e.g.:

    (fetchpatch {
      name = "CVE-2019-11068.patch";
      url = "https://gitlab.gnome.org/GNOME/libxslt/commit/e03553605b45c88f0b4b2980adfbbb8f6fca2fd6.patch";
      sha256 = "0pkpb4837km15zgg6h57bncp66d5lwrlvkr73h0lanywq7zrwhj8";
    })
    

If a security fix applies to both master and a stable release then, similar to regular changes, they are preferably delivered via master first and cherry-picked to the release branch.

Critical security fixes may by-pass the staging branches and be delivered directly to release branches such as master and release-*.

Deprecating/removing packages

There is currently no policy when to remove a package.

Before removing a package, one should try to find a new maintainer or fix smaller issues first.

Steps to remove a package from Nixpkgs

We use jbidwatcher as an example for a discontinued project here.

  1. Have Nixpkgs checked out locally and up to date.

  2. Create a new branch for your change, e.g. git checkout -b jbidwatcher

  3. Remove the actual package including its directory, e.g. rm -rf pkgs/applications/misc/jbidwatcher

  4. Remove the package from the list of all packages (pkgs/top-level/all-packages.nix).

  5. Add an alias for the package name in pkgs/top-level/aliases.nix (There is also pkgs/applications/editors/vim/plugins/aliases.nix. Package sets typically do not have aliases, so we can't add them there.)

    For example in this case:

    jbidwatcher = throw "jbidwatcher was discontinued in march 2021"; # added 2021-03-15
    

    The throw message should explain in short why the package was removed for users that still have it installed.

  6. Test if the changes introduced any issues by running nix-env -qaP -f . --show-trace. It should show the list of packages without errors.

  7. Commit the changes. Explain again why the package was removed. If it was declared discontinued upstream, add a link to the source.

    $ git add pkgs/applications/misc/jbidwatcher/default.nix pkgs/top-level/all-packages.nix pkgs/top-level/aliases.nix
    $ git commit
    

    Example commit message:

    jbidwatcher: remove
    
    project was discontinued in march 2021. the program does not work anymore because ebay changed the login.
    
    https://web.archive.org/web/20210315205723/http://www.jbidwatcher.com/
    
  8. Push changes to your GitHub fork with git push

  9. Create a pull request against Nixpkgs. Mention the package maintainer.

This is how the pull request looks like in this case: https://github.com/NixOS/nixpkgs/pull/116470

Pull Request Template

The pull request template helps determine what steps have been made for a contribution so far, and will help guide maintainers on the status of a change. The motivation section of the PR should include any extra details the title does not address and link any existing issues related to the pull request.

When a PR is created, it will be pre-populated with some checkboxes detailed below:

Tested using sandboxing

When sandbox builds are enabled, Nix will setup an isolated environment for each build process. It is used to remove further hidden dependencies set by the build environment to improve reproducibility. This includes access to the network during the build outside of fetch* functions and files outside the Nix store. Depending on the operating system access to other resources are blocked as well (ex. inter process communication is isolated on Linux); see sandbox in Nix manual for details.

Sandboxing is not enabled by default in Nix due to a small performance hit on each build. In pull requests for nixpkgs people are asked to test builds with sandboxing enabled (see Tested using sandboxing in the pull request template) because inhttps://nixos.org/hydra/ sandboxing is also used.

Depending if you use NixOS or other platforms you can use one of the following methods to enable sandboxing before building the package:

  • Globally enable sandboxing on NixOS: add the following to configuration.nix

    nix.useSandbox = true;
    
  • Globally enable sandboxing on non-NixOS platforms: add the following to: /etc/nix/nix.conf

    sandbox = true
    

Built on platform(s)

Many Nix packages are designed to run on multiple platforms. As such, its important to let the maintainer know which platforms your changes have been tested on. Its not always practical to test a change on all platforms, and is not required for a pull request to be merged. Only check the systems you tested the build on in this section.

Tested via one or more NixOS test(s) if existing and applicable for the change (look inside nixos/tests)

Packages with automated tests are much more likely to be merged in a timely fashion because it doesnt require as much manual testing by the maintainer to verify the functionality of the package. If there are existing tests for the package, they should be run to verify your changes do not break the tests. Tests can only be run on Linux. For more details on writing and running tests, see the section in the NixOS manual.

Tested compilation of all pkgs that depend on this change using nixpkgs-review

If you are updating a packages version, you can use nixpkgs-review to make sure all packages that depend on the updated package still compile correctly. The nixpkgs-review utility can look for and build all dependencies either based on uncommited changes with the wip option or specifying a github pull request number.

review changes from pull request number 12345:

nix run nixpkgs.nixpkgs-review -c nixpkgs-review pr 12345

review uncommitted changes:

nix run nixpkgs.nixpkgs-review -c nixpkgs-review wip

review changes from last commit:

nix run nixpkgs.nixpkgs-review -c nixpkgs-review rev HEAD

Tested execution of all binary files (usually in ./result/bin/)

Its important to test any executables generated by a build when you change or create a package in nixpkgs. This can be done by looking in ./result/bin and running any files in there, or at a minimum, the main executable for the package. For example, if you make a change to texlive, you probably would only check the binaries associated with the change you made rather than testing all of them.

Meets Nixpkgs contribution standards

The last checkbox is fits CONTRIBUTING.md. The contributing document has detailed information on standards the Nix community has for commit messages, reviews, licensing of contributions you make to the project, etc... Everyone should read and understand the standards the community has for contributing before submitting a pull request.

Hotfixing pull requests

  • Make the appropriate changes in you branch.
  • Dont create additional commits, do
    • git rebase -i
    • git push --force to your branch.

Commit policy

  • Commits must be sufficiently tested before being merged, both for the master and staging branches.
  • Hydra builds for master and staging should not be used as testing platform, its a build farm for changes that have been already tested.
  • When changing the bootloader installation process, extra care must be taken. Grub installations cannot be rolled back, hence changes may break peoples installations forever. For any non-trivial change to the bootloader please file a PR asking for review, especially from @edolstra.
digraph {
    "small changes" [shape=none]
    "mass-rebuilds and other large changes" [shape=none]
    "critical security fixes" [shape=none]
    "broken staging-next fixes" [shape=none]

    "small changes" -> master
    "mass-rebuilds and other large changes" -> staging
    "critical security fixes" -> master
    "broken staging-next fixes" -> "staging-next"

    "staging-next" -> master [color="#E85EB0"] [label="stabilization ends"] [fontcolor="#E85EB0"]
    "staging" -> "staging-next" [color="#E85EB0"] [label="stabilization starts"] [fontcolor="#E85EB0"]

    master -> "staging-next" -> staging [color="#5F5EE8"] [label="every six hours (GitHub Action)"] [fontcolor="#5F5EE8"]
}

This GitHub Action brings changes from master to staging-next and from staging-next to staging every 6 hours.

Master branch

The master branch is the main development branch. It should only see non-breaking commits that do not cause mass rebuilds.

Staging branch

The staging branch is a development branch where mass-rebuilds go. It should only see non-breaking mass-rebuild commits. That means it is not to be used for testing, and changes must have been well tested already. If the branch is already in a broken state, please refrain from adding extra new breakages.

Staging-next branch

The staging-next branch is for stabilizing mass-rebuilds submitted to the staging branch prior to merging them into master. Mass-rebuilds must go via the staging branch. It must only see non-breaking commits that are fixing issues blocking it from being merged into the master branch.

If the branch is already in a broken state, please refrain from adding extra new breakages. Stabilize it for a few days and then merge into master.

Stable release branches

The same staging workflow applies to stable release branches, but the main branch is called release-* instead of master.

Example branch names: release-21.11, staging-21.11, staging-next-21.11.

Most changes added to the stable release branches are cherry-picked (“backported”) from the master and staging branches.

Automatically backporting a Pull Request

Assign label backport <branch> (e.g. backport release-21.11) to the PR and a backport PR is automatically created after the PR is merged.

Manually backporting changes

Cherry-pick changes via git cherry-pick -x <original commit> so that the original commit id is included in the commit message.

Add a reason for the backport when it is not obvious from the original commit message. You can do this by cherry picking with git cherry-pick -xe <original commit>, which allows editing the commit message. This is not needed for minor version updates that include security and bug fixes but don't add new features or when the commit fixes an otherwise broken package.

Here is an example of a cherry-picked commit message with good reason description:

zfs: Keep trying root import until it works

Works around #11003.

(cherry picked from commit 98b213a11041af39b39473906b595290e2a4e2f9)

Reason: several people cannot boot with ZFS on NVMe

Other examples of reasons are:

  • Previously the build would fail due to, e.g., getaddrinfo not being defined
  • The previous download links were all broken
  • Crash when starting on some X11 systems

Acceptable backport criteria

The stable branch does have some changes which cannot be backported. Most notable are breaking changes. The desire is to have stable users be uninterrupted when updating packages.

However, many changes are able to be backported, including:

  • New Packages / Modules
  • Security / Patch updates
  • Version updates which include new functionality (but no breaking changes)
  • Services which require a client to be up-to-date regardless. (E.g. spotify, steam, or discord)
  • Security critical applications (E.g. firefox)