matrix-docker-ansible-deploy/docs/configuring-dns.md
Slavi Pantaleev 33726cdb08 Fix anchor
2019-02-06 13:02:17 +02:00

4.6 KiB

Configuring your DNS server

To set up Matrix on your domain, you'd need to do some DNS configuration.

To use an identifier like @<username>:<your-domain>, you don't actually need to install anything on the actual <your-domain> server.

You do, however need to instruct the Matrix network that Matrix services for <your-domain> are delegated over to matrix.<your-domain>. As we discuss in Server Delegation, there are 2 different ways to set up such delegation:

  • using a https://<your-domain>/.well-known/matrix/server file (on the base domain!)
  • using DNS SRV records

This playbook mostly discusses the well-known file method, because it's easier to manage with regard to certificates. If you decide to go with the alternative method (Server Delegation via a DNS SRV record (advanced)), please be aware that the general flow that this playbook guides you through may not match what you need to do.

To make matters worse, for backward compatibility until the Synapse server reaches v1.0, you need to set up a DNS SRV record anyway. So don't be confused if the general flow of this playbook asks you for both DNS SRV records and for setting up a well-known file. It's a temporary requirement during the Synapse v0.99/v1.0 transition.

General outline of DNS settings you need to do

Type Host Priority Weight Port Target
A matrix - - - matrix-server-IP
CNAME riot - - - matrix.<your-domain>
SRV _matrix._tcp 10 0 8448 matrix.<your-domain>
SRV _matrix-identity._tcp 10 0 443 matrix.<your-domain>

The _matrix._tcp SRV record is a temporary measure and will not be necessary in the near future. In fact, it will have to be removed at some point. To learn more about that, read below.

Subdomains setup

As the table above illustrates, you need to create 2 subdomains (matrix.<your-domain> and riot.<your-domain>) and point both of them to your new server's IP address (DNS A record or CNAME record is fine).

The riot.<your-domain> subdomain is necessary, because this playbook installs the Riot web client for you. If you'd rather instruct the playbook not to install Riot (matrix_riot_web_enabled: false when Configuring the playbook later), feel free to skip the riot.<your-domain> DNS record.

_matrix._tcp SRV record setup (temporary requirement)

All services created by this playbook are meant to be installed on their own server (such as matrix.<your-domain>).

To use a Matrix user identifier like @<username>:<your-domain> while hosting services on matrix.<your-domain>, we need to instruct the Matrix network of such a delegation/redirection by means of setting up a DNS SRV record.

The SRV record should look like this:

  • Name: _matrix._tcp (use this text as-is)
  • Content: 10 0 8448 matrix.<your-domain> (replace <your-domain> with your own)

A new file-based mechanism for Federation Server Discovery is superseding the _matrix._tcp SRV record. During the transition phase, you'll need to set up both mechanisms. We'll instruct you how to set up the file-based mechanism after the installation phase for this playbook.

Doing delegation/redirection of Matrix services using a DNS SRV record (_matrix._tcp) is a temporary measure that is only necessary before Synapse v1.0 is released.

As more and more people upgrade to the Synapse v0.99 transitional release and just before the final Synapse v1.0 gets released, at some point in the near future you will need to remove the _matrix._tcp SRV record and leave only the new file-based mechanism for Federation Server Discovery in place.

_matrix-identity._tcp SRV record setup

To make the mxisd Identity Server (which this playbook installs for you) be authoritative for your domain name, set up one more SRV record that looks like this:

  • Name: _matrix-identity._tcp (use this text as-is)
  • Content: 10 0 443 matrix.<your-domain> (replace <your-domain> with your own)

When you're done with the DNS configuration and ready to proceed, continue with Configuring this Ansible playbook.