muele-marlin/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Mightyboard Rev.E pin assignments
 * also works for Rev D boards. It's all rev E despite what the silk screen says
 */

/**
 * Rev B  2 JAN 2017
 *
 *  Added pin definitions for:
 *    M3, M4 & M5 spindle control commands
 *    case light
 *
 *  Corrected pin assignment for EX2_HEAT_PIN pin. Changed it from 9 to 11.  The port
 *  number (B5) agrees with the schematic but B5 is assigned to logical pin 11.
 */

#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
  #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'"
#endif

#define DEFAULT_MACHINE_NAME    "MB Replicator"
#define BOARD_NAME              "Mightyboard"

//
// Servos
//
#define SERVO0_PIN         36   // C1 (1280-EX1)
#define SERVO1_PIN         37   // C0 (1280-EX2)
#define SERVO2_PIN         40   // G1 (1280-EX3)
#define SERVO3_PIN         41   // G0 (1280-EX4)

//
// Limit Switches
//
#define X_MIN_PIN          49   // L0
#define X_MAX_PIN          48   // L1
#define Y_MIN_PIN          47   // L2
#define Y_MAX_PIN          46   // L3
#define Z_MIN_PIN          43   // L6
#define Z_MAX_PIN          42   // L7

//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
  #define Z_MIN_PROBE_PIN  42
#endif

//
// Filament Runout Pins
//
#ifndef FIL_RUNOUT_PIN
  #define FIL_RUNOUT_PIN   49
#endif
#ifndef FIL_RUNOUT2_PIN
  #define FIL_RUNOUT2_PIN  47
#endif

//
// Steppers
//
#define X_STEP_PIN         55   // F1
#define X_DIR_PIN          54   // F0
#define X_ENABLE_PIN       56   // F2

#define Y_STEP_PIN         59   // F5
#define Y_DIR_PIN          58   // F4
#define Y_ENABLE_PIN       60   // F6

#define Z_STEP_PIN         63   // K1
#define Z_DIR_PIN          62   // K0
#define Z_ENABLE_PIN       64   // K2

#define E0_STEP_PIN        25   // A3
#define E0_DIR_PIN         24   // A2
#define E0_ENABLE_PIN      26   // A4

#define E1_STEP_PIN        29   // A7
#define E1_DIR_PIN         28   // A6
#define E1_ENABLE_PIN      39   // G2

//
// I2C Digipots - MCP4018
// Address 5E (2F << 1)
// Set from 0 - 127 with stop bit.
// (Ex. 3F << 1 | 1)
//
#define DIGIPOTS_I2C_SCL    76   // J5
#define DIGIPOTS_I2C_SDA_X  57   // F3
#define DIGIPOTS_I2C_SDA_Y  61   // F7
#define DIGIPOTS_I2C_SDA_Z  65   // K3
#define DIGIPOTS_I2C_SDA_E0 27   // A5
#define DIGIPOTS_I2C_SDA_E1 77   // J6

#ifndef DIGIPOT_I2C_ADDRESS_A
  #define DIGIPOT_I2C_ADDRESS_A 0x2F   // unshifted slave address (5E <- 2F << 1)
#endif

//
// Temperature Sensors
//
// K7 - 69 / ADC15 - 15
#define TEMP_BED_PIN       15

// SPI for Max6675 or Max31855 Thermocouple
// Uses a separate SPI bus
//
//  3 E5 DO (SO)
//  5 E3 CS1
//  2 E4 CS2
// 78 E2 SCK
//
#define THERMO_SCK_PIN     78   // E2
#define THERMO_DO_PIN       3   // E5
#define THERMO_CS1_PIN      5   // E3
#define THERMO_CS2_PIN      2   // E4

#define MAX6675_SS_PIN     THERMO_CS1_PIN
#define MAX6675_SS2_PIN    THERMO_CS2_PIN
#define MAX6675_SCK_PIN    THERMO_SCK_PIN
#define MAX6675_DO_PIN     THERMO_DO_PIN

//
// Augmentation for auto-assigning plugs
//
// Two thermocouple connectors allows for either
// 2 extruders or 1 extruder and a heated bed.
// With no heated bed, an additional 24V fan is possible.
//

// Labels from the schematic:
#define EX1_HEAT_PIN        6   // H3
#define EX1_FAN_PIN         7   // H4
#define EX2_HEAT_PIN       11   // B5
#define EX2_FAN_PIN        12   // B6
#define HBP_PIN            45   // L4
#define EXTRA_FET_PIN      44   // L5

#if HOTENDS > 1
  #if TEMP_SENSOR_BED
    #define IS_EEB
  #else
    #define IS_EEF
  #endif
#elif TEMP_SENSOR_BED
  #define IS_EFB
#else
  #define IS_EFF
#endif

//
// Heaters / Fans (24V)
//
#define HEATER_0_PIN       EX1_HEAT_PIN

#if ENABLED(IS_EFB)                            // Hotend, Fan, Bed
  #define HEATER_BED_PIN   HBP_PIN
#elif ENABLED(IS_EEF)                          // Hotend, Hotend, Fan
  #define HEATER_1_PIN     EX2_HEAT_PIN
#elif ENABLED(IS_EEB)                          // Hotend, Hotend, Bed
  #define HEATER_1_PIN     EX2_HEAT_PIN
  #define HEATER_BED_PIN   HBP_PIN
#elif ENABLED(IS_EFF)                          // Hotend, Fan, Fan
  #define FAN1_PIN         HBP_PIN
#endif

#ifndef FAN_PIN
  #if EITHER(IS_EFB, IS_EFF)                      // Hotend, Fan, Bed or Hotend, Fan, Fan
    #define FAN_PIN        EX2_HEAT_PIN
  #elif EITHER(IS_EEF, IS_SF)                     // Hotend, Hotend, Fan or Spindle, Fan
    #define FAN_PIN        HBP_PIN
  #else
    #define FAN_PIN        EXTRA_FET_PIN
  #endif
#endif

//
// Misc. Functions
//
#define LED_PIN            13   // B7
#define CUTOFF_RESET_PIN   16   // H1
#define CUTOFF_TEST_PIN    17   // H0

//
// LCD / Controller
//
#if HAS_SPI_LCD

  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)

    #define LCD_PINS_RS    33   // C4: LCD-STROBE
    #define LCD_PINS_ENABLE 72  // J2: LEFT
    #define LCD_PINS_D4    35   // C2: LCD-CLK
    #define LCD_PINS_D5    32   // C5: RLED
    #define LCD_PINS_D6    34   // C3: LCD-DATA
    #define LCD_PINS_D7    31   // C6: GLED

    #define BTN_EN2        75   // J4, UP
    #define BTN_EN1        73   // J3, DOWN
    //STOP button connected as KILL_PIN
    #define KILL_PIN       14   // J1, RIGHT
    //KILL - not connected

    #define BEEPER_PIN      8   // H5, SD_WP

    //on board leds
    #define STAT_LED_RED_LED  SERVO0_PIN   // C1 (1280-EX1, DEBUG2)
    #define STAT_LED_BLUE_PIN SERVO1_PIN   // C0 (1280-EX2, DEBUG3)

  #else
    // Replicator uses a 3-wire SR controller with HD44780
    #define SR_DATA_PIN    34   // C3
    #define SR_CLK_PIN     35   // C2
    #define SR_STROBE_PIN  33   // C4

    #define BTN_UP         75   // J4
    #define BTN_DWN        73   // J3
    #define BTN_LFT        72   // J2
    #define BTN_RT         14   // J1

    // Disable encoder
    #undef BTN_EN1
    #undef BTN_EN2

    #define BEEPER_PIN      4   // G5

    #define STAT_LED_RED_PIN  32   // C5
    #define STAT_LED_BLUE_PIN 31   // C6 (Actually green)

  #endif

  #define BTN_CENTER       15   // J0
  #define BTN_ENC          BTN_CENTER

#endif // HAS_SPI_LCD

//
// SD Card
//
#define SDSS               53   // B0
#define SD_DETECT_PIN       9   // H6

//
//TMC 2208
//
#if HAS_DRIVER(TMC2208)
  /**
   * TMC2208 stepper drivers
   *
   * Hardware serial communication ports.
   * If undefined software serial is used according to the pins below
   */
  #define X_HARDWARE_SERIAL Serial2
  #define Y_HARDWARE_SERIAL Serial1

  /**
   * Software serial
   */

  #define X_SERIAL_TX_PIN  16
  #define X_SERIAL_RX_PIN  17

  #define Y_SERIAL_TX_PIN  18
  #define Y_SERIAL_RX_PIN  19

  #define Z_SERIAL_TX_PIN  41
  #define Z_SERIAL_RX_PIN  66

  #define E0_SERIAL_TX_PIN 40
  #define E0_SERIAL_RX_PIN 67

  #define E1_SERIAL_TX_PIN 37
  #define E1_SERIAL_RX_PIN 68

#endif