Add STARTUP_SCRIPT option. M17 parity with M18. (#14953)
This commit is contained in:
parent
36dfbaea8c
commit
179d6c4ed1
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -290,6 +290,15 @@ void enable_all_steppers() {
|
|||
enable_E5();
|
||||
}
|
||||
|
||||
void enable_e_steppers() {
|
||||
enable_E0();
|
||||
enable_E1();
|
||||
enable_E2();
|
||||
enable_E3();
|
||||
enable_E4();
|
||||
enable_E5();
|
||||
}
|
||||
|
||||
void disable_e_steppers() {
|
||||
disable_E0();
|
||||
disable_E1();
|
||||
|
@ -1117,6 +1126,10 @@ void setup() {
|
|||
init_closedloop();
|
||||
#endif
|
||||
|
||||
#ifdef STARTUP_COMMANDS
|
||||
queue.inject_P(PSTR(STARTUP_COMMANDS));
|
||||
#endif
|
||||
|
||||
#if ENABLED(INIT_SDCARD_ON_BOOT) && !HAS_SPI_LCD
|
||||
card.beginautostart();
|
||||
#endif
|
||||
|
|
|
@ -316,6 +316,7 @@ void manage_inactivity(const bool ignore_stepper_queue=false);
|
|||
/**
|
||||
* The axis order in all axis related arrays is X, Y, Z, E
|
||||
*/
|
||||
void enable_e_steppers();
|
||||
void enable_all_steppers();
|
||||
void disable_e_stepper(const uint8_t e);
|
||||
void disable_e_steppers();
|
||||
|
|
|
@ -67,12 +67,14 @@
|
|||
|
||||
#define AXIS_DRIVER_TYPE(A,T) AXIS_DRIVER_TYPE_##A(T)
|
||||
|
||||
#define HAS_E_DRIVER(T) ( AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) \
|
||||
|| AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) \
|
||||
|| AXIS_DRIVER_TYPE_E4(T) || AXIS_DRIVER_TYPE_E5(T) )
|
||||
|
||||
#define HAS_DRIVER(T) ( AXIS_DRIVER_TYPE_X(T) || AXIS_DRIVER_TYPE_X2(T) \
|
||||
|| AXIS_DRIVER_TYPE_Y(T) || AXIS_DRIVER_TYPE_Y2(T) \
|
||||
|| AXIS_DRIVER_TYPE_Z(T) || AXIS_DRIVER_TYPE_Z2(T) || AXIS_DRIVER_TYPE_Z3(T) \
|
||||
|| AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) \
|
||||
|| AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) \
|
||||
|| AXIS_DRIVER_TYPE_E4(T) || AXIS_DRIVER_TYPE_E5(T) )
|
||||
|| HAS_E_DRIVER(T) )
|
||||
|
||||
// Test for supported TMC drivers that require advanced configuration
|
||||
// Does not match standalone configurations
|
||||
|
|
|
@ -353,8 +353,8 @@ bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/,
|
|||
planner.settings.retract_acceleration = saved_acceleration;
|
||||
#endif
|
||||
|
||||
// Disable extruders steppers for manual filament changing (only on boards that have separate ENABLE_PINS)
|
||||
#if (E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN) || AXIS_DRIVER_TYPE_E0(TMC2660) || AXIS_DRIVER_TYPE_E1(TMC2660) || AXIS_DRIVER_TYPE_E2(TMC2660) || AXIS_DRIVER_TYPE_E3(TMC2660) || AXIS_DRIVER_TYPE_E4(TMC2660) || AXIS_DRIVER_TYPE_E5(TMC2660)
|
||||
// Disable E steppers for manual change
|
||||
#if HAS_E_STEPPER_ENABLE
|
||||
disable_e_stepper(active_extruder);
|
||||
safe_delay(100);
|
||||
#endif
|
||||
|
|
|
@ -30,11 +30,21 @@
|
|||
#endif
|
||||
|
||||
/**
|
||||
* M17: Enable power on all stepper motors
|
||||
* M17: Enable stepper motors
|
||||
*/
|
||||
void GcodeSuite::M17() {
|
||||
if (parser.seen("XYZE")) {
|
||||
if (parser.seen('X')) enable_X();
|
||||
if (parser.seen('Y')) enable_Y();
|
||||
if (parser.seen('Z')) enable_Z();
|
||||
#if HAS_E_STEPPER_ENABLE
|
||||
if (parser.seen('E')) enable_e_steppers();
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
LCD_MESSAGEPGM(MSG_NO_MOVE);
|
||||
enable_all_steppers();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
|
@ -45,20 +55,17 @@ void GcodeSuite::M18_M84() {
|
|||
stepper_inactive_time = parser.value_millis_from_seconds();
|
||||
}
|
||||
else {
|
||||
bool all_axis = !(parser.seen('X') || parser.seen('Y') || parser.seen('Z') || parser.seen('E'));
|
||||
if (all_axis) {
|
||||
planner.finish_and_disable();
|
||||
}
|
||||
else {
|
||||
if (parser.seen("XYZE")) {
|
||||
planner.synchronize();
|
||||
if (parser.seen('X')) disable_X();
|
||||
if (parser.seen('Y')) disable_Y();
|
||||
if (parser.seen('Z')) disable_Z();
|
||||
// Only disable on boards that have separate ENABLE_PINS or another method for disabling the driver
|
||||
#if (E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN) || AXIS_DRIVER_TYPE_E0(TMC2660) || AXIS_DRIVER_TYPE_E1(TMC2660) || AXIS_DRIVER_TYPE_E2(TMC2660) || AXIS_DRIVER_TYPE_E3(TMC2660) || AXIS_DRIVER_TYPE_E4(TMC2660) || AXIS_DRIVER_TYPE_E5(TMC2660)
|
||||
#if HAS_E_STEPPER_ENABLE
|
||||
if (parser.seen('E')) disable_e_steppers();
|
||||
#endif
|
||||
}
|
||||
else
|
||||
planner.finish_and_disable();
|
||||
|
||||
#if HAS_LCD_MENU && ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
if (ubl.lcd_map_control) {
|
||||
|
|
|
@ -927,6 +927,11 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#define HAS_E_STEPPER_ENABLE (HAS_E_DRIVER(TMC2660) \
|
||||
|| ( E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != X_ENABLE_PIN \
|
||||
&& E0_ENABLE_PIN != Y_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN ) \
|
||||
)
|
||||
|
||||
// Endstops and bed probe
|
||||
#define _HAS_STOP(A,M) (PIN_EXISTS(A##_##M) && !IS_X2_ENDSTOP(A,M) && !IS_Y2_ENDSTOP(A,M) && !IS_Z2_OR_PROBE(A,M))
|
||||
#define HAS_X_MIN _HAS_STOP(X,MIN)
|
||||
|
|
|
@ -32,8 +32,6 @@
|
|||
#define L6470_ERROR_MASK (STATUS_UVLO | STATUS_TH_WRN | STATUS_TH_SD | STATUS_OCD | STATUS_STEP_LOSS_A | STATUS_STEP_LOSS_B)
|
||||
#define dSPIN_STEP_CLOCK_FWD dSPIN_STEP_CLOCK
|
||||
#define dSPIN_STEP_CLOCK_REV dSPIN_STEP_CLOCK+1
|
||||
#define HAS_L6470_EXTRUDER ( AXIS_DRIVER_TYPE_E0(L6470) || AXIS_DRIVER_TYPE_E1(L6470) || AXIS_DRIVER_TYPE_E2(L6470) \
|
||||
|| AXIS_DRIVER_TYPE_E3(L6470) || AXIS_DRIVER_TYPE_E4(L6470) || AXIS_DRIVER_TYPE_E5(L6470) )
|
||||
|
||||
class L6470_Marlin {
|
||||
public:
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2306,6 +2306,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2307,6 +2307,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2311,6 +2311,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2306,6 +2306,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2302,6 +2302,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2302,6 +2302,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2302,6 +2302,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2302,6 +2302,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2307,6 +2307,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2307,6 +2307,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2302,6 +2302,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2308,6 +2308,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2308,6 +2308,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2304,6 +2304,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2302,6 +2302,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2299,6 +2299,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2302,6 +2302,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2302,6 +2302,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2316,6 +2316,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2303,6 +2303,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2295,6 +2295,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2295,6 +2295,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
|
@ -2305,6 +2305,13 @@
|
|||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
|
|
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue