zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Please install the EditorConfig plugin

Browse source
This commit is contained in:
Scott Lahteine 2020-12-14 21:27:05 -06:00
parent 5a6fc3e5b7
commit 69999f962a
2 changed files with 3 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Marlin/Configuration.h
View file

@ -957,14 +957,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

2
Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
View file

@ -60,7 +60,7 @@
// //
#ifndef HAS_PIN_27_BOARD #ifndef HAS_PIN_27_BOARD
#define SERVO0_PIN PB0 // BLTouch OUT #define SERVO0_PIN PB0 // BLTouch OUT
#else #else
#define SERVO0_PIN PC6 #define SERVO0_PIN PC6
#endif #endif