Chitu3D V9 board (#22401)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
VTXtruder 2021-07-20 23:27:19 -04:00 committed by Scott Lahteine
parent 29dde9be2b
commit 6b73b6c966
7 changed files with 234 additions and 309 deletions

View file

@ -333,18 +333,19 @@
#define BOARD_CCROBOT_MEEB_3DP 4035 // ccrobot-online.com MEEB_3DP (STM32F103RC) #define BOARD_CCROBOT_MEEB_3DP 4035 // ccrobot-online.com MEEB_3DP (STM32F103RC)
#define BOARD_CHITU3D_V5 4036 // Chitu3D TronXY X5SA V5 Board #define BOARD_CHITU3D_V5 4036 // Chitu3D TronXY X5SA V5 Board
#define BOARD_CHITU3D_V6 4037 // Chitu3D TronXY X5SA V6 Board #define BOARD_CHITU3D_V6 4037 // Chitu3D TronXY X5SA V6 Board
#define BOARD_CREALITY_V4 4038 // Creality v4.x (STM32F103RE) #define BOARD_CHITU3D_V9 4038 // Chitu3D TronXY X5SA V9 Board
#define BOARD_CREALITY_V427 4039 // Creality v4.2.7 (STM32F103RE) #define BOARD_CREALITY_V4 4039 // Creality v4.x (STM32F103RE)
#define BOARD_CREALITY_V4210 4040 // Creality v4.2.10 (STM32F103RE) as found in the CR-30 #define BOARD_CREALITY_V427 4040 // Creality v4.2.7 (STM32F103RE)
#define BOARD_CREALITY_V431 4041 // Creality v4.3.1 (STM32F103RE) #define BOARD_CREALITY_V4210 4041 // Creality v4.2.10 (STM32F103RE) as found in the CR-30
#define BOARD_CREALITY_V452 4042 // Creality v4.5.2 (STM32F103RE) #define BOARD_CREALITY_V431 4042 // Creality v4.3.1 (STM32F103RE)
#define BOARD_CREALITY_V453 4043 // Creality v4.5.3 (STM32F103RE) #define BOARD_CREALITY_V452 4043 // Creality v4.5.2 (STM32F103RE)
#define BOARD_TRIGORILLA_PRO 4044 // Trigorilla Pro (STM32F103ZET6) #define BOARD_CREALITY_V453 4044 // Creality v4.5.3 (STM32F103RE)
#define BOARD_FLY_MINI 4045 // FLYmaker FLY MINI (STM32F103RCT6) #define BOARD_TRIGORILLA_PRO 4045 // Trigorilla Pro (STM32F103ZET6)
#define BOARD_FLSUN_HISPEED 4046 // FLSUN HiSpeedV1 (STM32F103VET6) #define BOARD_FLY_MINI 4046 // FLYmaker FLY MINI (STM32F103RCT6)
#define BOARD_BEAST 4047 // STM32F103RET6 Libmaple-based controller #define BOARD_FLSUN_HISPEED 4047 // FLSUN HiSpeedV1 (STM32F103VET6)
#define BOARD_MINGDA_MPX_ARM_MINI 4048 // STM32F103ZET6 Mingda MD-16 #define BOARD_BEAST 4048 // STM32F103RET6 Libmaple-based controller
#define BOARD_GTM32_PRO_VD 4049 // STM32F103VET6 controller #define BOARD_MINGDA_MPX_ARM_MINI 4049 // STM32F103ZET6 Mingda MD-16
#define BOARD_GTM32_PRO_VD 4050 // STM32F103VET6 controller
// //
// ARM Cortex-M4F // ARM Cortex-M4F

View file

@ -537,6 +537,8 @@
#include "stm32f1/pins_CHITU3D_V5.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple env:chitu_v5_gpio_init env:chitu_v5_gpio_init_maple #include "stm32f1/pins_CHITU3D_V5.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple env:chitu_v5_gpio_init env:chitu_v5_gpio_init_maple
#elif MB(CHITU3D_V6) #elif MB(CHITU3D_V6)
#include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple #include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple
#elif MB(CHITU3D_V9)
#include "stm32f1/pins_CHITU3D_V9.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple
#elif MB(CREALITY_V4) #elif MB(CREALITY_V4)
#include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple #include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple
#elif MB(CREALITY_V4210) #elif MB(CREALITY_V4210)

View file

@ -81,12 +81,7 @@
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN PD12 // HOT-END #define HEATER_0_PIN PD12 // HOT-END
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN PG11 // HOT-BED #define HEATER_BED_PIN PG11 // HOT-BED
#define HEATER_BED2_PIN -1 // BED2
#define HEATER_BED3_PIN -1 // BED3
#ifndef FAN_PIN #ifndef FAN_PIN
#define FAN_PIN PG14 // MAIN BOARD FAN #define FAN_PIN PG14 // MAIN BOARD FAN
@ -97,8 +92,8 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_BED_PIN PA0 // Analog Input
#define TEMP_0_PIN PA1 // Analog Input #define TEMP_0_PIN PA1 // Analog Input
#define TEMP_BED_PIN PA0 // Analog Input
// //
// LCD Pins // LCD Pins

View file

@ -21,148 +21,8 @@
*/ */
#pragma once #pragma once
#include "env_validate.h"
/**
* 2017 Victor Perez Marlin for stm32f1 test
*/
#define BOARD_INFO_NAME "Chitu3D V5" #define BOARD_INFO_NAME "Chitu3D V5"
#define DEFAULT_MACHINE_NAME "STM32F103ZET6"
#define BOARD_NO_NATIVE_USB #define Z_STOP_PIN PG9
#define DISABLE_JTAG #include "pins_CHITU3D_common.h"
//
// EEPROM
//
#define FLASH_EEPROM_EMULATION
#if ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#else
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
#endif
//
// Limit Switches
//
#define X_STOP_PIN PG10
#define Y_STOP_PIN PA12
#define Z_STOP_PIN PA14
//
// Steppers
//
#define X_ENABLE_PIN PC13
#define X_STEP_PIN PE5
#define X_DIR_PIN PE6
#define Y_ENABLE_PIN PE4
#define Y_STEP_PIN PE2
#define Y_DIR_PIN PE3
#define Z_ENABLE_PIN PE1
#define Z_STEP_PIN PB9
#define Z_DIR_PIN PE0
#define E0_ENABLE_PIN PB8
#define E0_STEP_PIN PB4
#define E0_DIR_PIN PB5
#define E1_ENABLE_PIN PG8
#define E1_STEP_PIN PC7
#define E1_DIR_PIN PC6
//
// Temperature Sensors
//
#define TEMP_0_PIN PA1 // TH1
#define TEMP_BED_PIN PA0 // TB1
//
// Heaters
//
#define HEATER_0_PIN PG12 // HEATER1
#define HEATER_BED_PIN PG11 // HOT BED
//
// Fans
//
#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
#define FAN_PIN PG13 // FAN
#define FAN2_PIN PG14
//
// Misc
//
#define BEEPER_PIN PB0
//#define LED_PIN -1
//#define POWER_LOSS_PIN -1
#define FIL_RUNOUT_PIN PA15
// SPI Flash
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x200000 // 2MB
#endif
// SPI 2
#define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
//
// TFT with FSMC interface
//
#if HAS_FSMC_TFT
#define TOUCH_CS_PIN PB7 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define TFT_RESET_PIN PF11
#define TFT_BACKLIGHT_PIN PD13
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define TFT_CS_PIN FSMC_CS_PIN
#define TFT_RS_PIN FSMC_RS_PIN
#endif
#if ENABLED(TFT_LVGL_UI)
// LVGL
#define HAS_SPI_FLASH_FONT 1
#define HAS_GCODE_PREVIEW 1
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
#define HAS_LANG_SELECT_SCREEN 1
#define HAS_BAK_VIEW_IN_FLASH 0
#define HAS_LOGO_IN_FLASH 0
#elif ENABLED(TFT_COLOR_UI)
// Color UI
#define TFT_BUFFER_SIZE 14400
#endif
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
// Needs to use SPI2
#define SPI_DEVICE 2
#define SD_SCK_PIN PB13
#define SD_MISO_PIN PB14
#define SD_MOSI_PIN PB15
#define SD_SS_PIN PB12
//
// SD Card
//
#define SDIO_SUPPORT
#define SD_DETECT_PIN -1 // PF0, but it isn't connected
#define SDIO_CLOCK 4500000
#define SDIO_READ_RETRIES 16

View file

@ -21,160 +21,14 @@
*/ */
#pragma once #pragma once
#include "env_validate.h" #define BOARD_INFO_NAME "Chitu3D V6"
/**
* 2017 Victor Perez Marlin for stm32f1 test
*/
#define BOARD_INFO_NAME "Chitu3D"
#define DEFAULT_MACHINE_NAME "STM32F103ZET6"
#define BOARD_NO_NATIVE_USB
#define DISABLE_JTAG
//
// EEPROM
//
#if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION
#endif
#if ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#else
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
#endif
//
// Limit Switches
//
#define X_STOP_PIN PG10
#define Y_STOP_PIN PA12
#define Z_STOP_PIN PG9
//
// Steppers
//
#define X_ENABLE_PIN PC13
#define X_STEP_PIN PE5
#define X_DIR_PIN PE6
#define Y_ENABLE_PIN PE4
#define Y_STEP_PIN PE2
#define Y_DIR_PIN PE3
#define Z_ENABLE_PIN PE1
#define Z_STEP_PIN PB9
#define Z_DIR_PIN PE0
#define Z2_ENABLE_PIN PF3 #define Z2_ENABLE_PIN PF3
#define Z2_STEP_PIN PF5 #define Z2_STEP_PIN PF5
#define Z2_DIR_PIN PF1 #define Z2_DIR_PIN PF1
#define E0_ENABLE_PIN PB8
#define E0_STEP_PIN PB4
#define E0_DIR_PIN PB5
#define E1_ENABLE_PIN PG8
#define E1_STEP_PIN PC7
#define E1_DIR_PIN PC6
//
// Temperature Sensors
//
#define TEMP_0_PIN PA1 // TH1
#define TEMP_BED_PIN PA0 // TB1
//
// Heaters
//
#define HEATER_0_PIN PG12 // HEATER1
#define HEATER_BED_PIN PG11 // HOT BED
//#define HEATER_BED_INVERTING true
//
// Fans
//
#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
#define FAN_PIN PG13 // FAN
#define FAN2_PIN PG14
//
// Misc
//
#define BEEPER_PIN PB0
//#define LED_PIN PD3
//#define POWER_LOSS_PIN PG2 // PG4 PW_DET
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PA15 // MT_DET
#endif
#ifndef FIL_RUNOUT2_PIN #ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN PF13 #define FIL_RUNOUT2_PIN PF13
#endif #endif
// SPI Flash #include "pins_CHITU3D_common.h"
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x200000 // 2MB
#endif
// SPI 2
#define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
//
// TFT with FSMC interface
//
#if HAS_FSMC_TFT
#define TOUCH_CS_PIN PB7 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define TFT_RESET_PIN PF11
#define TFT_BACKLIGHT_PIN PD13
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#endif
#if ENABLED(TFT_LVGL_UI)
// LVGL
#define HAS_SPI_FLASH_FONT 1
#define HAS_GCODE_PREVIEW 1
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
#define HAS_LANG_SELECT_SCREEN 1
#define HAS_BAK_VIEW_IN_FLASH 0
#define HAS_LOGO_IN_FLASH 0
#elif ENABLED(TFT_COLOR_UI)
// Color UI
#define TFT_BUFFER_SIZE 14400
#endif
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
// so SPI2 is required.
#define SPI_DEVICE 2
#define SD_SCK_PIN PB13
#define SD_MISO_PIN PB14
#define SD_MOSI_PIN PB15
#define SD_SS_PIN PB12
//
// SD Card
//
#define SDIO_SUPPORT
#define SD_DETECT_PIN -1 // PF0, but it isn't connected
#define SDIO_CLOCK 4500000
#define SDIO_READ_RETRIES 16

View file

@ -0,0 +1,36 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#define BOARD_INFO_NAME "Chitu3D V9"
#define Z_STOP_PIN PA14
#define Z2_ENABLE_PIN PF3
#define Z2_STEP_PIN PF5
#define Z2_DIR_PIN PF1
#ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN PF13
#endif
#include "pins_CHITU3D_common.h"

View file

@ -0,0 +1,177 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "env_validate.h"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "Chitu3D"
#endif
#ifndef DEFAULT_MACHINE_NAME
#define DEFAULT_MACHINE_NAME "STM32F103ZET6"
#endif
#define BOARD_NO_NATIVE_USB
#define DISABLE_JTAG
//
// EEPROM
//
#if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION
#endif
#if ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#else
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
#endif
//
// Limit Switches
//
#define X_STOP_PIN PG10
#define Y_STOP_PIN PA12
#ifndef Z_STOP_PIN
#define Z_STOP_PIN PG9
#endif
//
// Steppers
//
#define X_ENABLE_PIN PC13
#define X_STEP_PIN PE5
#define X_DIR_PIN PE6
#define Y_ENABLE_PIN PE4
#define Y_STEP_PIN PE2
#define Y_DIR_PIN PE3
#define Z_ENABLE_PIN PE1
#define Z_STEP_PIN PB9
#define Z_DIR_PIN PE0
#define E0_ENABLE_PIN PB8
#define E0_STEP_PIN PB4
#define E0_DIR_PIN PB5
#define E1_ENABLE_PIN PG8
#define E1_STEP_PIN PC7
#define E1_DIR_PIN PC6
//
// Temperature Sensors
//
#define TEMP_0_PIN PA1 // TH1 Analog Input
#define TEMP_BED_PIN PA0 // TB1 Analog Input
//
// Heaters
//
#define HEATER_0_PIN PG12 // HEATER1
#define HEATER_BED_PIN PG11 // HOT BED
//#define HEATER_BED_INVERTING true
//
// Fans
//
#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
#define FAN_PIN PG13 // FAN
#define FAN2_PIN PG14
//
// Misc
//
#define BEEPER_PIN PB0
//#define LED_PIN PD3
//#define POWER_LOSS_PIN PG2 // PG4 PW_DET
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PA15 // MT_DET
#endif
// SPI Flash
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x200000 // 2MB
#endif
// SPI 2
#define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
//
// TFT with FSMC interface
//
#if HAS_FSMC_TFT
#define TOUCH_CS_PIN PB7 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define TFT_RESET_PIN PF11
#define TFT_BACKLIGHT_PIN PD13
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define TFT_CS_PIN FSMC_CS_PIN
#define TFT_RS_PIN FSMC_RS_PIN
#endif
#if ENABLED(TFT_LVGL_UI)
// LVGL
#define HAS_SPI_FLASH_FONT 1
#define HAS_GCODE_PREVIEW 1
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
#define HAS_LANG_SELECT_SCREEN 1
#define HAS_BAK_VIEW_IN_FLASH 0
#define HAS_LOGO_IN_FLASH 0
#elif ENABLED(TFT_COLOR_UI)
// Color UI
#define TFT_BUFFER_SIZE 14400
#endif
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
// so SPI2 is required.
#define SPI_DEVICE 2
#define SD_SCK_PIN PB13
#define SD_MISO_PIN PB14
#define SD_MOSI_PIN PB15
#define SD_SS_PIN PB12
//
// SD Card
//
#define SDIO_SUPPORT
#define SD_DETECT_PIN -1 // PF0, but it isn't connected
#define SDIO_CLOCK 4500000
#define SDIO_READ_RETRIES 16