zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

🎨 Fix spelling, whitespace

Browse source
This commit is contained in:
Scott Lahteine 2022-05-31 12:43:44 -05:00
parent 1d8d8dccf4
commit f3b593ae73
18 changed files with 28 additions and 28 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/Configuration.h
View file

@ -623,7 +623,7 @@
#if ENABLED(PIDTEMP)
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
// Set/get with gcode: M301 E[extruder number, 0-2]
// Set/get with G-code: M301 E[extruder number, 0-2]
#if ENABLED(PID_PARAMS_PER_HOTEND)
// Specify up to one value per hotend here, according to your setup.

2
Marlin/Makefile
View file

@ -512,7 +512,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1324)
else ifeq ($(HARDWARE_MOTHERBOARD),1325)
# Intamsys 4.0 (Funmat HT)
else ifeq ($(HARDWARE_MOTHERBOARD),1326)
# Malyan M180 Mainboard Version 2 (no display function, direct gcode only)
# Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
else ifeq ($(HARDWARE_MOTHERBOARD),1327)
# Geeetech GT2560 Rev B for A20(M/T/D)
else ifeq ($(HARDWARE_MOTHERBOARD),1328)

2
Marlin/src/core/boards.h
View file

@ -161,7 +161,7 @@
#define BOARD_PICA_REVB 1324 // PICA Shield (original version)
#define BOARD_PICA 1325 // PICA Shield (rev C or later)
#define BOARD_INTAMSYS40 1326 // Intamsys 4.0 (Funmat HT)
#define BOARD_MALYAN_M180 1327 // Malyan M180 Mainboard Version 2 (no display function, direct gcode only)
#define BOARD_MALYAN_M180 1327 // Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
#define BOARD_GT2560_V4_A20 1328 // Geeetech GT2560 Rev B for A20(M/T/D)
#define BOARD_PROTONEER_CNC_SHIELD_V3 1329 // Mega controller & Protoneer CNC Shield V3.00
#define BOARD_WEEDO_62A 1330 // WEEDO 62A board (TINA2, Monoprice Cadet, etc.)

2
Marlin/src/feature/meatpack.cpp
View file

@ -26,7 +26,7 @@
* Algorithm & Implementation: Scott Mudge - mail@scottmudge.com
* Date: Dec. 2020
*
* Character Frequencies from ~30 MB of comment-stripped gcode:
* Character Frequencies from ~30 MB of comment-stripped G-code:
* '1' -> 4451136 '4' -> 1353273 '\n' -> 1087683 '-' -> 90242
* '0' -> 4253577 '9' -> 1352147 'G' -> 1075806 'Z' -> 34109
* ' ' -> 3053297 '3' -> 1262929 'X' -> 975742 'M' -> 11879

4
Marlin/src/feature/meatpack.h
View file

@ -29,7 +29,7 @@
* Specifically optimized for 3D printing G-Code, this is a zero-cost data compression method
* which packs ~180-190% more data into the same amount of bytes going to the CNC controller.
* As a majority of G-Code can be represented by a restricted alphabet, I performed histogram
* analysis on a wide variety of 3D printing gcode samples, and found ~93% of all gcode could
* analysis on a wide variety of 3D printing G-code samples, and found ~93% of all G-code could
* be represented by the same 15-character alphabet.
*
* This allowed me to design a system of packing 2 8-bit characters into a single byte, assuming
@ -38,7 +38,7 @@
*
* Combined with some logic to allow commingling of full-width characters outside of this 15-
* character alphabet (at the cost of an extra 8-bits per full-width character), and by stripping
* out unnecessary comments, the end result is gcode which is roughly half the original size.
* out unnecessary comments, the end result is G-code which is roughly half the original size.
*
* Why did I do this? I noticed micro-stuttering and other data-bottleneck issues while printing
* objects with high curvature, especially at high speeds. There is also the issue of the limited

2
Marlin/src/feature/mmu/mmu2-serial-protocol.md
View file

@ -51,7 +51,7 @@ When done, the MMU sends
- MMU => 'ok\n'
We don't wait for a response here but immediately continue with the next gcode which should
We don't wait for a response here but immediately continue with the next G-code which should
be one or more extruder moves to feed the filament into the hotend.

2
Marlin/src/feature/mmu/mmu2.cpp
View file

@ -939,7 +939,7 @@ bool MMU2::load_filament_to_nozzle(const uint8_t index) {
* Load filament to nozzle of multimaterial printer
*
* This function is used only after T? (user select filament) and M600 (change filament).
* It is not used after T0 .. T4 command (select filament), in such case, gcode is responsible for loading
* It is not used after T0 .. T4 command (select filament), in such case, G-code is responsible for loading
* filament to nozzle.
*/
void MMU2::load_to_nozzle() {

2
Marlin/src/gcode/gcode.cpp
View file

@ -21,7 +21,7 @@
*/
/**
* gcode.cpp - Temporary container for all gcode handlers
* gcode.cpp - Temporary container for all G-code handlers
* Most will migrate to classes, by feature.
*/

2
Marlin/src/gcode/gcode.h
View file

@ -110,7 +110,7 @@
* M33 - Get the longname version of a path. (Requires LONG_FILENAME_HOST_SUPPORT)
* M34 - Set SD Card sorting options. (Requires SDCARD_SORT_ALPHA)
*
* M42 - Change pin status via gcode: M42 P<pin> S<value>. LED pin assumed if P is omitted. (Requires DIRECT_PIN_CONTROL)
* M42 - Change pin status via G-code: M42 P<pin> S<value>. LED pin assumed if P is omitted. (Requires DIRECT_PIN_CONTROL)
* M43 - Display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins (Requires PINS_DEBUGGING)
* M48 - Measure Z Probe repeatability: M48 P<points> X<pos> Y<pos> V<level> E<engage> L<legs> S<chizoid>. (Requires Z_MIN_PROBE_REPEATABILITY_TEST)
*

2
Marlin/src/gcode/parser.h
View file

@ -45,7 +45,7 @@
/**
* GCode parser
*
* - Parse a single gcode line for its letter, code, subcode, and parameters
* - Parse a single G-code line for its letter, code, subcode, and parameters
* - FASTER_GCODE_PARSER:
* - Flags existing params (1 bit each)
* - Stores value offsets (1 byte each)

2
Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp
View file

@ -708,7 +708,7 @@ void ChironTFT::PanelAction(uint8_t req) {
// Old TFT A22 X -1F1500 A22 X +1F1500
// New TFT A22 X-1.0 F1500 A22 X1.0 F1500
// lets just wrap this in a gcode relative nonprint move and let the controller deal with it
// Send a G-code-relative non-print move and let the controller deal with it
// G91 G0 <panel command> G90
if (!isPrinting()) { // Ignore request if printing

2
Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp
View file

@ -243,7 +243,7 @@ void DGUSDisplay::WritePGM(const char str[], uint8_t len) {
}
void DGUSDisplay::loop() {
// protect against recursion… ProcessRx() may indirectly call idle() when injecting gcode commands.
// Protect against recursion. ProcessRx() may indirectly call idle() when injecting G-code commands.
if (!no_reentrance) {
no_reentrance = true;
ProcessRx();

2
Marlin/src/lcd/extui/malyan/malyan.cpp
View file

@ -24,7 +24,7 @@
* lcd/extui/malyan/malyan.cpp
*
* LCD implementation for Malyan's LCD, a separate ESP8266 MCU running
* on Serial1 for the M200 board. This module outputs a pseudo-gcode
* on Serial1 for the M200 board. This module outputs a pseudo-G-code
* wrapped in curly braces which the LCD implementation translates into
* actual G-code commands.
*

6
Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp
View file

@ -369,7 +369,7 @@ uint32_t lv_open_gcode_file(char *path) {
card.openFileRead(cur_name);
card.read(public_buf, 512);
ps4 = (uint32_t *)strstr((char *)public_buf, ";simage:");
// Ignore the beginning message of gcode file
// Ignore the beginning message of G-code file
if (ps4) {
pre_sread_cnt = (uintptr_t)ps4 - (uintptr_t)((uint32_t *)(&public_buf[0]));
card.setIndex(pre_sread_cnt);
@ -490,7 +490,7 @@ void cutFileName(char *path, int len, int bytePerLine, char *outStr) {
//&& (strIndex2 != 0) && (strIndex1 < strIndex2)
) ? strIndex1 + 1 : tmpFile;
if (strIndex2 == 0 || (strIndex1 > strIndex2)) { // not gcode file
if (strIndex2 == 0 || (strIndex1 > strIndex2)) { // not G-code file
#if _LFN_UNICODE
if (wcslen(beginIndex) > len)
wcsncpy(outStr, beginIndex, len);
@ -503,7 +503,7 @@ void cutFileName(char *path, int len, int bytePerLine, char *outStr) {
strcpy(outStr, beginIndex);
#endif
}
else { // gcode file
else { // G-code file
if (strIndex2 - beginIndex > (len - 2)) {
#if _LFN_UNICODE
wcsncpy(outStr, (const WCHAR *)beginIndex, len - 3);

6
Marlin/src/lcd/extui/mks_ui/draw_ui.cpp
View file

@ -159,7 +159,7 @@ void gCfgItems_init() {
gCfgItems.spi_flash_flag = FLASH_INF_VALID_FLAG;
W25QXX.SPI_FLASH_SectorErase(VAR_INF_ADDR);
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&gCfgItems, VAR_INF_ADDR, sizeof(gCfgItems));
// init gcode command
// Init G-code command
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&custom_gcode_command[0], AUTO_LEVELING_COMMAND_ADDR, 100);
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&custom_gcode_command[1], OTHERS_COMMAND_ADDR_1, 100);
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&custom_gcode_command[2], OTHERS_COMMAND_ADDR_2, 100);
@ -238,7 +238,7 @@ void update_spi_flash() {
uint8_t command_buf[512];
W25QXX.init(SPI_QUARTER_SPEED);
// read back the gcode command before erase spi flash
// read back the G-code command before erase spi flash
W25QXX.SPI_FLASH_BufferRead((uint8_t *)&command_buf, GCODE_COMMAND_ADDR, sizeof(command_buf));
W25QXX.SPI_FLASH_SectorErase(VAR_INF_ADDR);
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&gCfgItems, VAR_INF_ADDR, sizeof(gCfgItems));
@ -249,7 +249,7 @@ void update_gcode_command(int addr, uint8_t *s) {
uint8_t command_buf[512];
W25QXX.init(SPI_QUARTER_SPEED);
// read back the gcode command before erase spi flash
// read back the G-code command before erase spi flash
W25QXX.SPI_FLASH_BufferRead((uint8_t *)&command_buf, GCODE_COMMAND_ADDR, sizeof(command_buf));
W25QXX.SPI_FLASH_SectorErase(VAR_INF_ADDR);
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&gCfgItems, VAR_INF_ADDR, sizeof(gCfgItems));

2
Marlin/src/lcd/extui/mks_ui/pic_manager.h
View file

@ -122,7 +122,7 @@
#define VAR_INF_ADDR 0x000000
#define FLASH_INF_VALID_FLAG 0x20201118
// Store some gcode commands, such as auto leveling commands
// Store some G-code commands, such as auto-leveling commands
#define GCODE_COMMAND_ADDR VAR_INF_ADDR + 3 * 1024
#define AUTO_LEVELING_COMMAND_ADDR GCODE_COMMAND_ADDR
#define OTHERS_COMMAND_ADDR_1 AUTO_LEVELING_COMMAND_ADDR + 100

4
Marlin/src/module/planner.h
View file

@ -162,7 +162,7 @@ enum BlockFlag : char {
* A single entry in the planner buffer.
* Tracks linear movement over multiple axes.
*
* The "nominal" values are as-specified by gcode, and
* The "nominal" values are as-specified by G-code, and
* may never actually be reached due to acceleration limits.
*/
typedef struct block_t {
@ -411,7 +411,7 @@ class Planner {
/**
* The current position of the tool in absolute steps
* Recalculated if any axis_steps_per_mm are changed by gcode
* Recalculated if any axis_steps_per_mm are changed by G-code
*/
static xyze_long_t position;

10
buildroot/share/scripts/g29_auto.py
View file

@ -1,13 +1,13 @@
#!/usr/bin/env python
# This file is for preprocessing gcode and the new G29 Autobedleveling from Marlin
# It will analyse the first 2 Layer and return the maximum size for this part
# After this it will replace with g29_keyword = ';MarlinG29Script' with the new G29 LRFB
# the new file will be created in the same folder.
# This file is for preprocessing G-code and the new G29 Auto bed leveling from Marlin
# It will analyze the first 2 layers and return the maximum size for this part
# Then it will be replaced with g29_keyword = ';MarlinG29Script' with the new G29 LRFB.
# The new file will be created in the same folder.
from __future__ import print_function
# your gcode-file/folder
# Your G-code file/folder
folder = './'
my_file = 'test.gcode'