Scott Lahteine
64d092935b
More useful ENABLED / DISABLED macros ( #17054 )
2020-03-07 22:20:41 -06:00
Scott Lahteine
b1a50d54e2
HAS_TRINAMIC => HAS_TRINAMIC_CONFIG
2020-03-02 12:04:36 -06:00
Scott Lahteine
730804289c
Catch more LPC1768 pin conflicts ( #17019 )
2020-02-29 04:14:40 -06:00
Scott Lahteine
0a7e7a6fa5
Allow servo features in combination ( #16960 )
2020-02-26 06:26:54 -06:00
ellensp
e76f2ed4cb
Fix Trinamic pulse rate auto-assignment ( #16966 )
2020-02-26 04:34:21 -06:00
Scott Lahteine
9a51f29efa
Simplified E_AXIS_HAS macro
2020-02-23 23:55:56 -06:00
Jason Smith
ebd2bcc177
Fix AXIS_HAS_SW_SERIAL
2020-02-23 21:59:31 -06:00
Scott Lahteine
0ba18848af
Allow USE_GCODE_SUBCODES for debugging
2020-02-22 22:50:03 -06:00
Giuliano Zaro
90e2c42031
Adafruit Grand Central M4 fixes ( #16812 )
2020-02-09 09:57:22 -06:00
Scott Lahteine
7bf2190f03
Fix CALIBRATION_GCODE pin handling
2020-02-04 08:32:43 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
Scott Lahteine
5b12627e14
Auto assign DIAG pins for multi-endstop ( #16723 )
2020-01-30 03:24:57 -06:00
0r31
8737c35ded
Fix HAS_FAN macro ( #16717 )
2020-01-29 22:48:26 -06:00
yangwenxiong
248b7dfa59
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans ( #16595 )
2020-01-25 02:13:39 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
Scott Lahteine
707349d492
Updates for L64XX
2020-01-19 19:53:12 -06:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
George Fu
4108c5d01f
Update FYSETC S6 pins ( #16559 )
2020-01-17 13:16:05 -06:00
greppp
7f87a044cd
Fix Ender-2 display pins, add BTN_ENC ( #16349 )
2020-01-03 20:44:16 -06:00
Jason Smith
4e1f2f89f6
Refactor TMC-related macros and sanity checks ( #16384 )
2020-01-01 21:51:15 -06:00
InsanityAutomation
1c9ccce520
Add NOZZLE_AS_PROBE (no probe offsets) ( #15929 )
2019-12-24 00:03:08 -06:00
Scott Lahteine
87992f3669
Use Github Actions for CI, date bump ( #16269 )
2019-12-20 19:11:53 -06:00
Scott Lahteine
64ebec50dc
Move pins debug condition
2019-12-20 10:19:41 -06:00
Jason Smith
1bad8f1b17
Improve pulse timing and step reliability ( #16128 )
2019-12-19 02:38:48 -06:00
MS1987
31fdaea269
Add MKS Robin Pro, MKS Robin Lite3 ( #16163 )
2019-12-11 00:23:47 -06:00
ManuelMcLure
c061656659
Use PSU powerup delay for all powerups ( #16065 )
2019-12-01 17:36:49 -06:00
Felicia Hummel
6c2438deae
Fix PSU_POWERUP_DELAY compile error ( #16064 )
2019-12-01 12:55:28 -06:00
Felicia Hummel
690ed531b6
Configurable PSU power-on delay ( #16050 )
2019-11-30 07:17:24 -06:00
Denis Semenov
0fcd1f4a49
Fix HAS_CLASSIC_E_JERK and related issues ( #15968 )
2019-11-23 15:56:07 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Bob
751cd1f533
MAX31865 temperature sensor ( #15930 )
2019-11-21 03:15:10 -06:00
Scott Lahteine
3f4636e916
"nozzle_to_probe_offset" is obsolete
2019-11-13 03:07:54 -06:00
ManuelMcLure
b9703fdf36
Ensure TMC + LIN_ADVANCE pulse length ( #15807 )
2019-11-10 19:04:28 -06:00
LinFor
48b7a1e66e
Allow non-zero "fan off" PWM value ( #15709 )
2019-11-10 16:33:56 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro ( #15829 )
2019-11-09 17:59:04 -06:00
InsanityAutomation
d4f5821cd6
Fix 3-point sanity check ( #15696 )
2019-10-28 15:46:59 -05:00
Scott Lahteine
af214ff121
Fix up PSU_CONTROL checks
2019-10-22 16:16:12 -05:00
Jason Smith
832cb7e1ac
Z_STEPPER_AUTO_ALIGN — To align with Z stepper points ( #15195 )
2019-10-16 13:39:58 -05:00
Piotr
fe4c69b64a
Poll *all* enabled endstop pins ( #15525 )
2019-10-15 13:28:04 -05:00
InsanityAutomation
0074d63962
Vendor version override ( #14189 )
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 12:32:44 -05:00
Marcio Teixeira
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
Scott Lahteine
1df6c7a46c
Work around a compiler bug
...
See #15478
2019-10-08 19:27:03 -05:00
Scott Lahteine
519cc1bc67
NUM_AXIS is now obsolete
2019-10-06 22:18:16 -05:00
Giuliano Zaro
a1ad01e4ab
Limit Case Light PWM ( #15459 )
2019-10-05 22:32:50 -05:00
Scott Lahteine
806d64e1bf
X_SENSORLESS includes AXIS_HAS_STALLGUARD
2019-09-30 22:56:22 -05:00
Scott Lahteine
50e4545255
Add custom types for position ( #15204 )
2019-09-29 04:25:39 -05:00
InsanityAutomation
a6b0223eea
Revive and improve DELTA probe bounds, LRFB options ( #15372 )
2019-09-28 01:19:11 -05:00
Scott Lahteine
dc65788511
Shorthand for __VA_ARGS__
2019-09-27 04:43:34 -05:00
Scott Lahteine
661c3cfc99
Fix mesh bounds for MBL
2019-09-25 09:05:46 -05:00
InsanityAutomation
e9cf46a9a5
M851 XY 3 point followup (incomplete) ( #15361 )
2019-09-25 02:43:41 -05:00
InsanityAutomation
df1e51258a
Add M851 X Y probe offsets ( #15202 )
2019-09-24 21:29:21 -05:00
InsanityAutomation
6a312fae80
Add before/after dir change delays ( #15314 )
2019-09-19 23:05:17 -05:00
Scott Lahteine
ffb418b226
Move some SD comments
2019-09-14 02:31:47 -05:00
Robby Candra
acd76e8609
Allow odd mm bed sizes ( #15258 )
2019-09-14 01:26:14 -05:00
Scott Lahteine
584c86bed1
More "zero extruders" changes ( #15213 )
2019-09-10 02:20:49 -05:00
Luu Lac
8bca3fcf2c
Display chamber with HAS_TEMP_CHAMBER ( #15194 )
2019-09-08 02:20:18 -05:00
Jamie
dbee0e9c54
Analog joystick jogging control ( #14648 )
2019-09-08 00:55:34 -05:00
thisiskeithb
cdd5056aba
Increase MKS MINI 12864 default contrast ( #15139 )
2019-09-02 19:40:58 -05:00
AlexandrZloy
0ebaea94be
Add stallGuard threshold for X2 ( #15042 )
2019-08-29 00:15:31 -05:00
Scott Lahteine
c7825e6719
Contrast over 63 assume 255 max
...
This is closer to the prior behavior.
2019-08-25 04:31:00 -05:00
Tim Moore
1461ee4d36
Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT ( #15046 )
2019-08-25 04:25:07 -05:00
Scott Lahteine
04a9962cb5
Fix: Contrast override in pins files
...
Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults.
2019-08-24 00:58:05 -05:00
Tanguy Pruvot
e604f76703
Enable contrast via LCD_CONTRAST_INIT ( #15006 )
2019-08-21 18:56:39 -05:00
Ludy
05995d1fd6
Unify buzz methods as MarlinUI::buzz ( #14803 )
2019-08-20 02:01:37 -05:00
Tim Moore
4575978a1f
Fix auto power for chamber fan ( #14922 )
2019-08-16 18:42:24 -05:00
Marcio Teixeira
179d6c4ed1
Add STARTUP_SCRIPT option. M17 parity with M18. ( #14953 )
2019-08-14 21:05:15 -05:00
teemuatlut
d4974ea719
TMC SPI Endstops and Improved Sensorless Homing ( #14044 )
2019-08-04 22:22:58 -05:00
Tim Moore
940c59d9da
Overlord i2c LCD with LEDs and buzzer ( #14801 )
2019-08-02 06:19:45 -05:00
rafaljot
e44fccf3d2
Add support for M575 ( #14757 )
2019-07-30 02:30:00 -05:00
mikeshub
1579091c20
PID loop improvements ( #14746 )
...
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
2019-07-28 15:50:25 -05:00
Scott Lahteine
d4be970c8b
Update DOGLCD conditions
2019-07-14 13:10:13 -05:00
InsanityAutomation
f1eaed7e98
Only init servo pins used for servos ( #14589 )
2019-07-12 04:30:15 -05:00
gmarsh
ab99a80793
GMARSH X6 board support ( #14550 )
2019-07-09 00:30:08 -05:00
Scott Lahteine
1a349c7522
Add HAS_TMC220x
2019-07-08 23:07:42 -05:00
Scott Lahteine
750a16ad38
Fix MIN/MAX function collision with macros
2019-07-05 18:14:02 -05:00
Tim Moore
eb6dec03bd
Simplify power supply naming logic ( #14488 )
...
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 01:58:34 -05:00
Scott Lahteine
de462f2b8a
Revert "Sort out settings.load with SD EEPROM emulation ( #14458 )"
...
This reverts commit 108d0df565
2019-07-03 19:11:30 -05:00
Scott Lahteine
ce2b4bc20c
Conditionals tweak
2019-07-02 20:30:26 -05:00
Tanguy Pruvot
108d0df565
Sort out settings.load with SD EEPROM emulation ( #14458 )
2019-07-01 09:10:17 -05:00
Scott Lahteine
4d5a1984e2
Simplified fan handling code
2019-06-28 18:50:32 -05:00
Scott Lahteine
93cd66ac11
Tweaky change from (C) to (c)
2019-06-27 23:58:16 -05:00
Scott Lahteine
d7d80418ae
Singleton for cutting tools ( #14429 )
2019-06-27 23:06:49 -05:00
Andy Shaw
064177154c
Update SD card connection / sharing options ( #14325 )
2019-06-26 03:55:57 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support ( #14249 )
2019-06-20 15:47:50 -05:00
InsanityAutomation
bf64dd4db6
Improve G34, M422 (Z alignment) ( #14142 )
2019-06-18 07:02:18 -05:00
doggyfan
90121047d9
Fix thermal protection with user thermistor ( #14130 )
2019-05-25 23:37:08 -05:00
chai-md
940ff8e7c8
Improve LV8729 stepping ( #13776 )
2019-05-11 19:02:19 -05:00
InsanityAutomation
6811e2921b
BLTouch v3 / 3DTouch Interoperability & performance ( #13814 )
2019-05-07 21:25:54 -05:00
doggyfan
23a8707ef1
Configurable Thermistor ( #13888 )
2019-05-06 18:51:06 -05:00
Giuliano Zaro
e2a77ed881
Bring chamber temp to completion ( #13837 )
2019-05-04 22:51:47 -05:00
Stephan
84273557f9
Move and update heated chamber settings ( #13671 )
...
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 15:38:10 -05:00
ManuelMcLure
492883859e
Don't protect unused CS pins ( #13647 )
2019-04-10 21:57:57 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print ( #13616 )
2019-04-08 13:44:35 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
2019-03-13 06:51:15 -05:00
Scott Lahteine
d94e077901
Apply HAS_HOTEND_OFFSET where needed
2019-03-11 20:58:27 -05:00
Scott Lahteine
aa1d587128
Some LCD code cleanup
2019-03-11 05:07:31 -05:00
pinchies
4df9509ead
Add support for printers with inverted fan pins ( #13362 )
...
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
2019-03-10 20:51:21 -05:00
Reece Kibble
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
2019-03-08 02:15:42 -06:00
3dlabsio
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
2019-03-07 02:09:39 -06:00
Scott Lahteine
44571775bd
Further support for 6 extruders
2019-03-07 01:00:56 -06:00
Scott Lahteine
2f1e1dcb42
Gradual step towards EXTRUDERS 0 support
2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
2019-03-01 00:27:45 -06:00
Scott Lahteine
f37df28d17
UBL G29 T current position fix
...
Counterpart to #12845
2019-02-26 22:25:53 -06:00
Scott Lahteine
808b076000
Update some ABL/UBL conditionals
2019-02-25 16:01:42 -06:00
LinFor
ba39186364
TMC_DEBUG optimization and improvements ( #13135 )
2019-02-20 02:22:42 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Scott Lahteine
166e567ab8
Fix HAS_MOTOR_CURRENT_PWM
2019-02-10 05:06:46 -06:00
Marcio Teixeira
e1604198ff
G425 — Auto-calibrate Backlash and Nozzle Offsets ( #13050 )
2019-02-06 17:20:17 -06:00
InsanityAutomation
413e303ad5
More Advanced Pause options ( #12984 )
2019-02-06 06:39:42 -06:00
teemuatlut
d81342254a
Support new TMC drivers ( #13026 )
2019-02-06 06:33:14 -06:00
Nicolas G
6fb4001b58
Add option to disable fan speed slowing in M303 ( #13066 )
2019-02-04 00:12:41 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
2019-01-17 13:17:16 -06:00
mikeshub
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
teemuatlut
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
2018-12-07 15:34:21 -06:00
Scott Lahteine
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES ( #12559 )
2018-11-30 12:31:42 -06:00
Jacob Jordan
8be91677df
Fix Skew factors ( #12555 )
...
- Ensure Skew factors are calculated from test square measurements
2018-11-29 11:39:31 -06:00
Marcio Teixeira
439a3e8463
Improve runout sensor, fix LIGHTWEIGHT_UI screen size ( #12544 )
2018-11-27 13:45:25 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
2018-11-16 20:47:07 -06:00
Mateusz Krawczuk
ca21ac6b9b
Support two MAX6675 thermocouples ( #8686 )
2018-11-16 18:20:33 -06:00
Scott Lahteine
a3923424c7
Clean up LCD width/height determination
2018-11-12 02:37:40 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
...
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 12:16:24 -06:00
revilor
b60abc7c37
[2.0.x] Macro G-codes ( #9365 )
2018-11-09 05:25:08 -06:00
Scott Lahteine
44fa7fb18c
Cleanups for leveling-related code
2018-11-04 19:07:47 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup ( #12322 )
...
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
2018-11-04 02:25:55 -06:00
Scott Lahteine
d1ff22b983
Revive SCARA's home offset (unimplemented)
2018-11-03 06:24:41 -05:00
Scott Lahteine
2c9586be0c
Clear up HAS_WORKSPACE_OFFSET meaning
2018-11-03 04:06:37 -05:00
Scott Lahteine
31c28d0dd2
Drop pgm_read_*_near and let headers choose ( #12301 )
...
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
2018-11-02 00:42:16 -05:00
Ludy
9f77df2590
Followup to menu refactor. TMC warnings, sanity. ( #12288 )
...
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
2018-11-01 16:13:33 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor ( #12275 )
2018-10-30 16:34:45 -05:00
TheLongAndOnly
5536228359
G34 Auto-align multi-stepper Z axis ( #11302 )
2018-10-29 14:01:36 -05:00
Scott Lahteine
e8031b1152
Add Custom Microstepping options
2018-10-25 11:26:32 -05:00
Scott Lahteine
45e738876a
Add stepper MS3 support
...
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
2018-10-11 01:10:11 -05:00
InsanityAutomation
ee253991d4
Various fixups for single-nozzle filament swap ( #12036 )
2018-10-08 15:39:55 -05:00
InsanityAutomation
74cd6cb4fc
Single nozzle filament change ( #11994 )
2018-10-07 17:06:14 -05:00
teemuatlut
c447d75916
Add support for TMC2660 ( #11998 )
2018-10-06 17:18:10 -05:00
teemuatlut
c3229e1b34
Migrate to a new TMC library ( #11943 )
2018-10-03 02:48:49 -05:00
AnoNymous
b30ca652ae
Replace MIN# / MAX# with variadic MIN / MAX ( #11960 )
2018-09-30 04:59:14 -05:00
Thomas Moore
3286325044
Add TMC2130 sensorless probing
2018-09-29 18:54:14 -05:00
Scott Lahteine
10590c2f80
Fix some fan conditionals
2018-09-18 21:23:33 -05:00
Scott Lahteine
1718eff54a
Code changes supporting up to 6 extruders
2018-09-16 22:32:53 -05:00
Thomas Moore
c437bb08f1
Overhaul of the planner ( #11578 )
...
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
2018-09-16 21:24:15 -05:00
Holger Müller
1a6f2b29b8
Add support for Triple-Z steppers/endstops
2018-09-16 00:35:58 -05:00
Scott Lahteine
d1c9517903
Followup to hotend_offset[Z] patch
2018-08-24 21:32:00 -05:00
Scott Lahteine
6964e1a95a
Clean up trailing whitespace
2018-08-14 00:55:37 -05:00
Scott Lahteine
b328fb4dc9
Treat TMC2660 like non-TMC ( #11508 )
2018-08-10 00:30:28 -05:00
Greg Nutt
a1a5367380
Smoothieboard V1.0/1.1 and A5984 support
2018-08-09 23:03:17 -05:00
Scott Lahteine
9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash ( #11447 )
2018-08-03 20:47:29 -05:00
teemuatlut
fbcdf5eaeb
Simplify stepper driver per-axis selection
2018-07-25 02:47:43 -05:00
Scott Lahteine
25e2ca8896
Add Z_CLEARANCE_MULTI_PROBE
...
Co-Authored-By: nightgryphon <ngryph@gmail.com>
2018-07-12 22:46:34 -05:00
Scott Lahteine
68e6650df7
Remove Quake Fast Inverse SQRT (it isn't faster)
2018-07-04 22:22:10 -05:00
Scott Lahteine
8eaac0dab3
Add delta feedrate scaling ( #11153 )
2018-06-30 13:44:27 -05:00
Scott Lahteine
1b8973eb1c
Fix up microsteps conditionals
2018-06-27 23:41:32 -05:00
Scott Lahteine
7a84b03796
Use MIN/MAX in post-conditionals
2018-06-20 03:15:19 -05:00
Scott Lahteine
0d79128c8d
Localize stepper-specific defines
2018-06-12 21:16:54 -05:00
etagle
6f14bcaa3e
Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
...
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
2018-06-10 16:02:47 -05:00
etagle
39a7e7720d
Adaptive multiaxis step smoothing
...
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup
2018-06-10 16:02:47 -05:00
Scott Lahteine
83d42f33e1
Add HAS_HOTEND_OFFSET_Z conditional
2018-05-19 17:05:15 -05:00
Jiri Jaburek
43ddb29f9e
Add FAN_MAX_PWM for M106-controlled fans
2018-05-15 21:18:46 -05:00
Scott Lahteine
99ecdf59af
Smarter MIN, MAX, ABS macros
...
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-13 04:52:56 -05:00
Scott Lahteine
325bbbc8c2
[2.0.x] Enable AD595 and AD8495 in concert ( #10693 )
...
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
2018-05-11 01:01:51 -05:00
Scott Lahteine
19f189b4e5
Add UBL support for G2/G3 and G5 ( #10648 )
2018-05-08 11:10:45 -05:00
Scott Lahteine
81b632c255
Additional temp-oriented improvements
2018-05-02 08:43:22 -05:00
nightdemonx
e911635fb1
Add thermocouple with AD8495 support
2018-05-02 08:43:16 -05:00
Scott Lahteine
f790b4bc0a
Reorganize some conditionals
2018-04-27 02:23:11 -05:00
Scott Lahteine
df6bc812b5
Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE
...
As pointed out in #10532
2018-04-27 02:23:10 -05:00
Scott Lahteine
299c4fed42
Undefine PIDTEMPBED without a bed heater
2018-04-26 01:30:10 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional ( #10495 )
2018-04-23 17:13:01 -05:00
Scott Lahteine
11ab017dd0
Creality3D Power-Loss Recovery
2018-04-21 21:56:50 -05:00
Marcio Teixeira
5cc7916e69
Add G29_RETRY_AND_RECOVER feature
...
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
2018-04-19 19:45:53 -05:00
Scott Lahteine
39c6f65ce7
Ignore LCD_BED_LEVELING with UBL
2018-04-17 15:57:44 -05:00
Sean
2d9b0a66fe
Add Filament Change accelerations
2018-04-09 23:57:27 -05:00
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:06 -05:00
Karl Andersson
7cbbc2af7a
[2.0.x] Optional heater signal inversion ( #10260 )
2018-04-02 19:37:41 -05:00
Scott Lahteine
adcb87f0db
Z Endstop Servo => Z Probe Servo
2018-04-01 23:54:21 -05:00
Eduardo José Tagle
97e8a6ebd9
Various fixes for DUE... ( #10152 )
...
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
2018-03-21 19:04:45 -05:00
Scott Lahteine
dd2949922b
Consolidate 3-point leveling point options
2018-03-19 04:12:20 -05:00
Scott Lahteine
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
2018-03-19 04:11:46 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
Scott Lahteine
eb212ae073
Add suspend_auto_report flag to suppress auto-report
2018-03-07 01:57:09 -06:00
Scott Lahteine
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
2018-03-07 01:53:50 -06:00
Scott Lahteine
6d7f4f84e2
Add board MKS_BASE_HEROIC ( #9926 )
...
Followup to #9008
- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
2018-03-03 23:14:52 -06:00
Scott Lahteine
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics ( #9868 )
2018-03-01 01:37:31 -06:00
Scott Lahteine
3f89bbeab5
Drop a conditional only used once
2018-02-24 16:35:31 -06:00
Studiodyne
d3ca82d8c2
Support for multiple filament runout sensors
2018-02-19 07:02:50 -06:00
Scott Lahteine
ca55f2927a
Pulldown pin mode support ( #9701 )
...
Implemented for LPC1768.
2018-02-18 19:26:23 -06:00
Roxy-3D
3d74ff3c87
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES
...
There is significant downside to breaking up the long line segments on UBL Cartesian machines. It adds a lot of extra computation but worse... It cuts out all of UBL's off mesh Z-Height correction checks. There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately. They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
2018-02-14 14:16:12 -06:00
Scott Lahteine
5dc04c5201
Fix #9361
2018-02-14 07:48:20 -06:00
Thomas Moore
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
2018-02-08 04:20:44 -06:00
Scott Lahteine
db031d5d76
Add missing SoftwareSerial begin for TMC2208
...
Based on #9299
2018-01-22 10:43:24 -06:00
Thomas Moore
3db35ba9be
[2.0.x] Fix change filament for delta machines ( #9295 )
2018-01-22 10:21:42 -06:00
Scott Lahteine
2ebf52e57d
Fix Skew Correction pre-calculation overflow error
2018-01-22 08:20:21 -06:00
Scott Lahteine
f2ea8a0529
Merge pull request #9197 from p3p/pr_bf2_operation_freemem
...
[2.0.x] LPC1768: Free up some RAM
2018-01-19 22:35:45 -06:00
Roxy-3D
9d0cf02fef
Correct mesh size calculations
2018-01-17 09:36:12 -06:00
Roxy-3D
acb1e31374
Fix UBL Mesh Size regression
2018-01-16 17:58:15 -06:00
Christopher Pepper
6f1bf5d212
LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256
2018-01-15 22:02:21 +00:00
Scott Lahteine
6a043eee55
Various updates for TMC support
2018-01-10 23:04:48 -06:00
Scott Lahteine
957bbab57f
Update inc files for parity with 1.1.x
2017-12-16 20:20:06 -06:00
