Scott Lahteine
0772c8e55f
Merge pull request #5487 from thinkyhead/rc_easier_move_axis
...
Rearrange Move Menu, Fix up Delta Calibration
2016-12-13 07:07:05 -08:00
Scott Lahteine
93b2833347
Move Menu: Select axis first, resolution after
2016-12-13 03:11:14 -08:00
Scott Lahteine
641e0936d4
Patch up Delta Calibration Menu
2016-12-13 02:42:28 -08:00
Scott Lahteine
b4dbf4d18a
Non-reentrant "Moving..." screen to safely wait in LCD
2016-12-13 02:42:27 -08:00
Scott Lahteine
2b5d424394
Use handle_reprapworld_keypad for keypad handling
2016-12-13 01:41:08 -08:00
AnHardt
cd2b74e88d
Replace ftostr62sign with ftostr62rj
...
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
2016-12-12 20:25:20 +01:00
esenapaj
a298a58684
Remove redundant "E"
2016-12-09 02:27:34 +09:00
Scott Lahteine
3fb43c11fc
Fix compile error with LCD_I2C_VIKI
2016-12-07 23:29:45 -06:00
Scott Lahteine
01e5d46ea7
Patch some planner compile errors
2016-12-07 02:26:24 -06:00
AnHardt
a6fbd4a5d8
Distribute GLCD screen updates in time
...
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.
This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.
Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.
13:45:59.213 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30; #:17 >:13 s:30; S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
03:30:36.779 : echo: #:8 >:7 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:8 >:7 s:15; S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:9 >:7 s:16; #:8 >:6 s:14; S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:7 s:15; S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:8 >:8 s:16; #:8 >:6 s:14; S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:9 >:6 s:15; S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14; #:10 >:8 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:7 s:15; #:9 >:6 s:15; S#:36 S>:26 S:62
#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
2016-12-05 12:22:54 -06:00
Scott Lahteine
4bafdf4b66
Support DISTINCT_E_FACTORS in LCD Motion Menu
2016-12-05 07:26:18 -06:00
Scott Lahteine
0b53d78046
Tweak editable items for debugging
2016-12-04 03:51:10 -06:00
Scott Lahteine
b0361ebe4f
Merge pull request #5343 from thinkyhead/rc_invert_case_light
...
Allow case light pin to be active low
2016-12-02 01:17:11 -06:00
Scott Lahteine
f60b4f8659
Allow case light pin to be active low
2016-12-01 23:32:34 -06:00
Scott Lahteine
d07229f185
Fix redraw in SD Card menus
2016-12-01 18:15:58 -06:00
Scott Lahteine
a69b1ee691
Merge pull request #5313 from thinkyhead/rc_fix_menu_actions
...
Keep drawing menu unless screen changes
2016-11-28 02:01:39 -06:00
Scott Lahteine
32ee3acf86
Merge pull request #5315 from thinkyhead/rc_fixup_material_menus
...
Refine material heatup menu items
2016-11-28 01:46:51 -06:00
Scott Lahteine
c70a06daf1
lcd_save_previous_menu => lcd_save_previous_screen
2016-11-28 01:46:18 -06:00
Scott Lahteine
13ea43cc8d
Only exit menu handler when the screen changes
2016-11-28 01:46:18 -06:00
Scott Lahteine
f45b6a7762
Merge pull request #5314 from thinkyhead/case_light_menu_fix
...
Fix and optimize case-light code
2016-11-28 01:45:27 -06:00
Scott Lahteine
0951d385ce
Don't set heater temperature above its maximum
2016-11-28 01:37:24 -06:00
Scott Lahteine
c9193e856d
Limit preheat parameters based on all nozzles
2016-11-28 01:37:24 -06:00
Scott Lahteine
bb4529f7d2
PLA / ABS => Material 1 / 2
2016-11-28 01:37:24 -06:00
Scott Lahteine
61437d988a
Fix and optimize case-light code
2016-11-28 01:34:52 -06:00
AnHardt
7a9fa78822
MENU_HOLLOW_FRAME for the menu screens
...
MENU_HOLLOW_FRAME for the menu screens and
some pixel shifting to optimize the look with tall fonts. (cn)
2016-11-27 22:59:05 +01:00
Scott Lahteine
71842b6a17
Apply const to LCD arguments and locals
2016-11-26 06:53:52 -06:00
Scott Lahteine
2a9b3376a9
Merge pull request #5289 from thinkyhead/rc_which_menu_actions
...
Drop "static" keyword in ultralcd.cpp function declarations
2016-11-23 23:04:05 -06:00
Scott Lahteine
b97dafe4b8
Drop "static" keyword in ultralcd.cpp function declarations
2016-11-23 20:43:01 -06:00
Scott Lahteine
d891324830
Merge pull request #5258 from mosh1/mbl_speed_fix
...
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
2016-11-23 14:15:01 -06:00
Scott Lahteine
7f8133a51f
Merge pull request #5255 from Kaibob2/CaseLightMenu
...
Case light menu (3rd attempt)
2016-11-23 13:46:33 -06:00
Kai
0c341f0c50
Added Menu entry for Case light
2016-11-23 19:29:15 +01:00
esenapaj
7b836a4000
Introduce a +1234.56 format for over 999 steps/mm
2016-11-21 17:45:07 +09:00
Moshen Chan
29b174bfb9
Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED
2016-11-19 16:34:41 -08:00
Scott Lahteine
2cc32d85a3
Adjust ENSURE_SMOOTH_MOVES coding style
2016-11-19 01:28:48 -06:00
Sebastianv650
de89dc9f04
Ensure smooth print moves even with LCD enabled
...
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.
This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
2016-11-19 01:28:47 -06:00
Kai
8e8b4398f3
Printer Stats / Completed prints line doesn't fit in display (when german)
2016-11-09 22:03:25 +01:00
Scott Lahteine
7780052fb3
Give instant feedback for filament change
2016-11-07 03:48:16 -06:00
Scott Lahteine
00662b8635
Minor babystep cleanup patches
2016-11-03 23:31:45 -05:00
Scott Lahteine
cad792e702
Reduce code for invariant lcd_detected
2016-11-03 23:31:45 -05:00
esenapaj
c8c1a28f6f
Follow-up the PR #5089 (Centralize click-handling in the LCD loop)
...
bool feedback is no longer used
2016-11-02 08:36:02 +09:00
Scott Lahteine
1a2310c494
Make LCD preheat vars an array to reduce code size
2016-10-28 20:57:36 -05:00
Scott Lahteine
50ee749082
Centralize click-handling in the LCD loop
2016-10-28 20:57:21 -05:00
Scott Lahteine
9cbedab91b
Use DPM where possible
2016-10-26 18:38:32 -05:00
Scott Lahteine
4b056d8184
Fix warning in ultralcd.cpp
2016-10-26 17:51:26 -05:00
Scott Lahteine
8b967a9ff0
Merge pull request #5058 from thinkyhead/rc_reverse_arrow_buttons
...
Apply encoder reverse options to keypad arrows
2016-10-22 13:52:35 -05:00
Scott Lahteine
e151f952a3
Apply encoder reverse options to keypad arrows
2016-10-22 11:51:33 -05:00
Josef Pavlik
0bd66807b2
fixed warning: extra ;
2016-10-22 11:12:29 -05:00
Josef Pavlik
d35dc407a8
fixed warning: ISO C99 requires rest arguments to be used
2016-10-22 11:12:29 -05:00
Josef Pavlik
c2b51af3ba
fixed warning: ISO C does not permit named variadic macros
2016-10-22 11:12:29 -05:00
Scott Lahteine
0d3fc7dd89
Merge pull request #5059 from gcormier/fixbaby
...
Set defer delay back to false when exiting babystepping.
2016-10-22 10:59:17 -05:00
Greg Cormier
0009725637
Set defer delay back to false when exiting babystepping.
2016-10-22 09:43:30 -04:00
Scott Lahteine
0908329d96
Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical
...
Fix manual leveling coordinates
2016-10-22 06:31:02 -05:00
Scott Lahteine
1165e83263
MBL coordinates are logical
2016-10-22 05:55:44 -05:00
Scott Lahteine
b19bba275f
No LCD timeout during babystepping
...
As requested in #5031
2016-10-22 05:26:07 -05:00
Scott Lahteine
d963020532
Sort out some header dependencies
2016-10-10 17:14:03 -05:00
Scott Lahteine
f8199b2cc1
Merge pull request #4982 from thinkyhead/rc_abl_bugfix
...
Fix planner with kinematics, delta ABL
2016-10-10 13:24:22 -05:00
Josef Pavlik
f8c2473a71
Improve planner kinematics, fix delta ABL
2016-10-09 13:32:46 -05:00
Scott Lahteine
ff6b23cb0f
Fix an issue with shifted LCD lines
2016-10-09 13:00:00 -05:00
Scott Lahteine
a1b50f1102
Cleanup of code style
2016-10-07 15:57:24 -05:00
jaysonkelly
13c9dcc600
Add LCD menu for DAC
2016-10-07 15:13:03 -05:00
Scott Lahteine
c592ccb6f5
Patch max_jerk[Z] menu item
2016-10-02 10:12:47 -05:00
Scott Lahteine
d19cfcfc1d
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK
2016-10-02 06:34:56 -05:00
Scott Lahteine
850259bb25
Watch bed temp also for Control menu item
2016-09-28 14:14:04 -05:00
Scott Lahteine
ea0dbee3c9
Enable ABL by type, support bilinear on cartesian
2016-09-25 23:35:37 -05:00
Scott Lahteine
145d9005d1
Fix BLTOUCH string and SERVO_DELAY
2016-09-21 01:45:23 -05:00
Scott Lahteine
13523cbf29
Fix and extend BLTouch support
2016-09-20 16:20:36 -05:00
Scott Lahteine
f38a33a5d8
Add handling of BLTouch error state
2016-09-18 22:00:32 -05:00
Scott Lahteine
9429c7db89
Use ABC indices in delta[]
2016-09-18 13:50:38 -05:00
Scott Lahteine
83a41c7ceb
Remove SCARA axis_scaling
2016-09-16 15:21:18 -05:00
Scott Lahteine
5ecc7d9f25
Clear LCD button state, apply timer to all
...
Addressing #3007
2016-09-13 16:10:27 -05:00
Scott Lahteine
6ab54c60b1
Add conditionals for kinematics, leveling
2016-09-13 03:32:59 -05:00
Scott Lahteine
e354cf5884
Apply sw_endstops_enabled to manual move
2016-08-21 00:10:08 -05:00
Scott Lahteine
71319adbb8
Wrap ULTIPANEL-dependent code
2016-08-20 18:33:11 -05:00
Scott Lahteine
305913545e
Move number-to-string function to utility.*
2016-08-20 18:33:11 -05:00
Scott Lahteine
628dcbc764
extruder_multiplier => flow_percentage
2016-08-18 22:13:47 -05:00
Scott Lahteine
132322e4d9
Fix #4614 : currentScreen only defined with ULTIPANEL
2016-08-14 00:29:46 -07:00
Scott Lahteine
405afec393
Include decimeters in filamentUsed display
2016-08-12 05:16:43 -07:00
Scott Lahteine
432e9a1f50
Use configured feedrates, center for DELTA_CALIBRATION_MENU
2016-08-11 12:05:55 -07:00
Scott Lahteine
58c8e6cef2
Fixes #4576 : Convert filamentUsed to long for display
2016-08-09 23:57:28 -07:00
Scott Lahteine
3be4511230
Patch command order in delta calibration menu
2016-08-08 21:15:25 -07:00
Scott Lahteine
88540d8ecf
Fix: LCD displays SD status at startup
2016-08-08 20:53:18 -07:00
Scott Lahteine
b16ea09498
Make DELTA_CALIBRATION_MENU more universal
2016-08-08 20:42:58 -07:00
Scott Lahteine
42927530fe
Explicitly clear the screen in lcd_goto_screen
2016-08-06 18:10:39 -07:00
Scott Lahteine
a6d2c2479f
Minor cleanup of lcd_goto_screen calls
2016-08-06 18:10:39 -07:00
Scott Lahteine
e47c8b9829
Save bytes for custom chars (Hitachi LCD)
2016-08-06 18:10:39 -07:00
Scott Lahteine
938e6d15c4
Patch up some flaws, here and there
2016-08-05 08:17:37 -07:00
Scott Lahteine
7e2bd9a233
Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT
2016-08-03 21:18:38 -07:00
Scott Lahteine
c9123adc59
Improved SCREEN / MENU macros
2016-08-02 18:05:34 -07:00
Scott Lahteine
3cccaa9885
Allow encoder pulse/step override for more LCDs
2016-08-02 15:57:26 -07:00
Scott Lahteine
330f82971b
Buzzer requires BEEPER_PIN
2016-08-02 14:05:37 -07:00
Scott Lahteine
38af251b91
Use a default argument in _lcd_move_e
2016-08-01 16:09:26 -07:00
Scott Lahteine
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 17:49:34 -07:00
Scott Lahteine
ad68b4cb8b
Followup to #4468
2016-07-30 03:49:42 -07:00
Scott Lahteine
696b63e300
Specify manual-movable E axes by extruder type
2016-07-30 00:36:48 -07:00
Scott Lahteine
b7b7c90477
Merge pull request #4389 from thinkyhead/rc_optimize_planner
...
Optimize planner with precalculation, etc.
2016-07-24 17:48:23 -07:00
Scott Lahteine
f8b5749235
Replace division in planner with multiplication
2016-07-24 13:27:49 -07:00
João Brázio
62d96d72f3
Renamed timestamp_t to duration_t
2016-07-24 03:16:02 +01:00
Scott Lahteine
1766b990b8
Merge pull request #4376 from jbrazio/timestamp_t-short
...
Adds short format to timestamp_t
2016-07-22 21:17:17 -07:00
João Brázio
9e5dbf67e8
Update the stats menu to include longest job and extruded filament
2016-07-23 03:05:45 +01:00
João Brázio
b4aad85c9a
Rework stats menu to use timestamp_t
2016-07-23 01:42:21 +01:00
Scott Lahteine
d5e2d523c7
Generalize kinematics function names
2016-07-22 16:36:34 -07:00
Scott Lahteine
0432613ad7
use enabled macro for mapper setting
2016-07-19 18:08:56 -07:00
Scott Lahteine
2bad02e60d
Reprapworld Keypad: F1 opens the Move Axis menu
2016-07-19 16:40:39 -07:00
Scott Lahteine
eaa6f568ee
Prevent re-entrant call of Reprapworld Keypad handler
2016-07-19 16:40:39 -07:00
Scott Lahteine
06ac1f3bcf
Reduce Reprapworld Keypad move code size
2016-07-19 16:40:39 -07:00
Scott Lahteine
8a2efd1155
Rename ultralcd implementation files for consistency
2016-07-19 15:26:14 -07:00
Scott Lahteine
c502018eab
Merge pull request #4353 from jbrazio/global-enum-file
...
General cleanup: enum
2016-07-19 13:37:56 -07:00
João Brázio
3ebad4e020
Moves all global enums to a central file
2016-07-19 14:31:09 +01:00
esenapaj
361307831e
Follow-up the PR #4335 (Debug char, fix compile errors for lcd pins)
...
・Solve a flickering when SD card is inserted or removed at using a ASCII
LCD + language_kana.h
2016-07-18 20:09:24 +09:00
Scott Lahteine
f242aea032
Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you
...
Wrangle feed rate variables
2016-07-17 14:07:52 -07:00
Scott Lahteine
9f9fe043ba
Apply sq macro throughout
2016-07-17 13:29:41 -07:00
Scott Lahteine
93ba5bddd7
Append units to feedrate variables
2016-07-17 13:29:41 -07:00
Scott Lahteine
94955a8bf7
pad string in lcd_finishstatus
2016-07-17 12:27:37 -07:00
Scott Lahteine
05da02f0a2
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-07-17 10:53:10 -07:00
Scott Lahteine
9766e24504
Merge pull request #4277 from thinkyhead/rc_mks_13_viki2
...
Support for VIKI2 with MKS 1.3 / 1.4
2016-07-16 23:49:33 -07:00
Scott Lahteine
aaa0d298b9
Merge pull request #4326 from thinkyhead/rc_no_static_items_fix
...
Suppress compiler warnings in ultralcd.cpp
2016-07-16 23:38:08 -07:00
Petr Zahradník junior
2d7fe9dc78
LCD Longer print
2016-07-16 18:21:06 -07:00
Scott Lahteine
d53dcaa796
Suppress some compiler warnings
2016-07-16 17:59:01 -07:00
Scott Lahteine
95ab2fd3ae
Fix skipping of static items
2016-07-14 19:16:16 -07:00
Scott Lahteine
c5e51f6b96
finished => completed
2016-07-14 11:46:35 -07:00
Scott Lahteine
e481b79af1
Allow stopwatch and printcounter to go over 18 hours
2016-07-14 11:39:57 -07:00
Scott Lahteine
2224032568
Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine
...
No delay for the smallest LCD moves
2016-07-12 20:16:38 -07:00
Scott Lahteine
a8b6b6a128
Merge pull request #4252 from thinkyhead/rc_rename_hpb
...
Replace PLA/ABS preheating with generic
2016-07-12 20:00:33 -07:00
Scott Lahteine
ecd5e810ac
No delay for the smallest LCD moves
2016-07-12 18:09:01 -07:00
Scott Lahteine
2b9515d60f
Merge pull request #4281 from AnHardt/lang-system
...
Don't use UTF-strlen() if the text is not UTF
2016-07-12 17:21:28 -07:00
Scott Lahteine
e9f62d8fdb
Remove extraneous conditions for encoder position
2016-07-12 16:41:00 -07:00
AnHardt
54d35230df
Don't use UTF-strlen() if the text is not UTF
2016-07-12 19:59:03 +02:00
Scott Lahteine
4865447830
Merge pull request #4276 from esenapaj/Suppress-warnings
...
Suppress warnings
2016-07-11 19:08:59 -07:00
Scott Lahteine
6e68dd292b
Merge pull request #4243 from thinkyhead/rc_fix_static_scrolling
...
Improve STATIC_ITEM implementation
2016-07-11 18:25:00 -07:00
Scott Lahteine
d17b161832
Don't draw current screen if simply changing screens
2016-07-11 18:14:04 -07:00
Scott Lahteine
096f9981d1
Scroll to the top when changing screens
2016-07-11 18:14:04 -07:00
Scott Lahteine
155af6b861
Rename vars, add comments for menu macros
2016-07-11 18:14:04 -07:00
Scott Lahteine
31f2cf5f6f
Make encoderLine signed for proper compares
2016-07-11 18:14:03 -07:00
Scott Lahteine
d2099fef0d
Left-justify thermistor info
2016-07-11 18:14:03 -07:00
Scott Lahteine
85aeb02aa6
Invert headings on Graphical LCD
2016-07-11 18:14:03 -07:00
Scott Lahteine
13dc619f43
Scroll static screens more simply
2016-07-11 18:14:02 -07:00
Scott Lahteine
5051723c2e
Redraw after cursor correction in STATIC_ITEM
2016-07-11 18:14:02 -07:00
esenapaj
58177a1602
Suppress warnings
2016-07-12 08:22:24 +09:00
Scott Lahteine
10ebf28ee3
Allow override of ENCODER_FEEDRATE_DEADZONE, lower default for Viki
2016-07-11 15:43:08 -07:00
Scott Lahteine
6121c9018a
Merge pull request #4265 from thinkyhead/rc_buzzer_patchup
...
Two strategies to address a stuck buzzer
2016-07-10 19:46:15 -07:00
Scott Lahteine
71674059c3
Two strategies to address a stuck buzzer
2016-07-10 19:25:23 -07:00
Petr Zahradnik
eaf9e615ce
Total print time for LCD correction (hours:minutes format)
2016-07-10 13:08:05 +02:00
Scott Lahteine
f9e08b1fcd
Merge pull request #4254 from AnHardt/killscreen
...
Add a kill-screen
2016-07-09 20:44:42 -07:00
AnHardt
faac2bcfdb
Add a kill-screen
2016-07-10 04:50:45 +02:00
Scott Lahteine
1026e5b071
Replace PLA/ABS preheating with generic
2016-07-09 18:06:51 -07:00
AnHardt
de3a169336
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
...
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
Always make a potential rise to `home_offset[Z_AXIS]` possible in G28.
Get rid of some very ugly constructs in MBL (ultralcd.cpp).
2016-07-08 15:08:32 +02:00
Scott Lahteine
834ad14c8d
Add quickstop_stepper to update current position with stepper.quick_stop()
2016-07-07 16:37:22 -07:00
Scott Lahteine
160a2be117
Change cancel_heatup to wait_for_heatup
2016-07-06 09:17:50 -07:00
Scott Lahteine
ef8980bfa0
Shorter labels for Print Stats info
2016-07-03 16:00:24 -07:00
Scott Lahteine
2ed625dafa
Fix compiler warnings for static screens
2016-07-03 15:26:17 -07:00
