Robby Candra
5ca8d51e12
Ability to insert G-code in front of queue ( #14229 )
2019-06-08 05:23:53 -05:00
Chris
36a0376c36
fix TMC2208 boot loop with SW UART
...
Need stepper .begin() before calling susbequent .push()
2019-05-26 13:07:12 +02:00
InsanityAutomation
49e83dd7c8
BLTouch V3.1 changes ( #14104 )
2019-05-25 21:56:47 -05:00
teemuatlut
1c86fbc60b
TMC updates, capture LCD changes ( #14074 )
2019-05-25 18:22:12 -05:00
Marcio Teixeira
7ccbcf2eaa
Fix TMC EEPROM regression ( #14008 )
...
Partially undo 15357af
to ensure TMC code is initialized in the proper order.
2019-05-16 20:38:03 -05:00
InsanityAutomation
5108e4b6aa
Cleaner EEPROM auto init ( #13975 )
2019-05-11 16:54:03 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' ( #13944 )
2019-05-09 11:45:55 -05:00
Scott Lahteine
23ec650410
Consolidate Malyan LCD and ExtUI
2019-05-07 21:31:30 -05:00
InsanityAutomation
5dcb25664f
Option to Auto-Initialize EEPROM ( #13935 )
2019-05-07 16:30:31 -05:00
Marcio Teixeira
15357af67c
Backlash cleanup ( #13659 )
...
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
2019-05-03 23:53:15 -05:00
Tanguy Pruvot
51d1e0f1dd
Auto-mount the SDIO SD card ( #13879 )
2019-05-02 00:45:21 -05:00
Marcio Teixeira
e6ebd30f60
Fix LCD issue on stepper timeout ( #13630 )
...
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
2019-04-10 15:51:48 -05:00
Scott Lahteine
fae2b7edc3
Update MMU2 code style
2019-04-08 18:13:42 -05:00
Scott Lahteine
c8a83fb122
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA
2019-04-08 18:13:41 -05:00
Scott Lahteine
cacec5764a
Clean up whitespace
2019-04-04 22:12:02 -05:00
Scott Lahteine
f1810689ff
Fix bootscreen condition
2019-04-04 00:19:47 -05:00
Robby Candra
46445a5a16
Event G-code for Stop SD Print ( #13547 )
...
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
2019-04-02 22:09:30 -05:00
Marcio Teixeira
5679fae11e
UltraLCD enhancements (lower fan resolution, backlash menu) ( #13519 )
2019-03-29 14:07:43 -05:00
InsanityAutomation
691e5c3bb8
BLTouch V3.0 support ( #13406 )
2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Scott Lahteine
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
2019-03-13 06:51:15 -05:00
Michiel Baird
b824a517aa
Add G38.4 and G38.5 ( #13348 )
2019-03-10 17:22:09 -05:00
Bruce j Beare
e4d080e63c
Reset after kill with a button on the KILL_PIN ( #13091 )
2019-03-10 09:57:38 -05:00
Scott Lahteine
12503fce06
Followup to wait_for_user fix
2019-03-10 09:14:02 -05:00
Tobias Frost
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
2019-03-09 14:20:37 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
2019-03-05 06:46:19 -06:00
Scott Lahteine
a2e3226597
Init XYZ to configured home position
2019-02-28 22:10:26 -06:00
InsanityAutomation
eb4bf93ea4
Add more Babystep options ( #13262 )
2019-02-27 04:38:56 -06:00
Bob Kuhn
ddbe4cfa20
Printrboard G2 support ( #13116 )
2019-02-26 21:03:13 -06:00
Scott Lahteine
89bbc30a09
Fix init of power supply pin
...
Fix #13184
2019-02-20 05:29:05 -06:00
Marcio Teixeira
992cdc8d14
Fix host action / G-code ordering in event_probe_failure ( #13207 )
...
Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.
2019-02-19 14:45:03 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move ( #13168 )
2019-02-14 15:09:35 -06:00
Giuliano Zaro
bdc2f10b90
Update Italian language, fix unused var warning ( #13164 )
2019-02-13 21:05:18 -06:00
Marcio Teixeira
9f0e1834ec
Followup to #13039 ( #13163 )
...
- Fix compile error when accessing `process_subcommands_now_P`.
- Use `const` var eliminating double-negative (to make code more understandable).
2019-02-13 20:39:38 -06:00
Scott Lahteine
7cf9b93f26
Add HAS_FILAMENT_SENSOR ahead of 12962
2019-02-12 20:13:20 -06:00
InsanityAutomation
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Rolf Werum
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
2019-02-06 06:30:53 -06:00
Marcio Teixeira
5cfc1cdacc
Support SWITCHING_NOZZLE with 2 servos ( #13054 )
2019-02-04 00:19:56 -06:00
revilor
6a57d0b381
Prusa MMU2 ( #12967 )
2019-01-31 19:10:52 -06:00
InsanityAutomation
48a3502656
Remote streamer improvements ( #12982 )
2019-01-27 22:43:13 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
Giuliano Zaro
7bb5d4bfe8
Small LED code reorganization ( #12929 )
2019-01-17 13:20:26 -06:00
Giuliano Zaro
8f4c6e6d1a
Fix case light on boot ( #12919 )
2019-01-15 18:50:56 -06:00
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
2019-01-12 00:41:48 -06:00
teemuatlut
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
2018-12-09 20:54:48 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type ( #12557 )
2018-11-29 16:58:58 -06:00
Scott Lahteine
66580f32c2
Make CardReader class static ( #12451 )
...
* Make CardReader a static class
* Make CardReader flags into bitfields
2018-11-16 22:39:16 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
2018-11-16 20:47:07 -06:00