Commit graph

9729 commits

Author SHA1 Message Date
Scott Lahteine 0c1cd9f590 Fix "No SD Card" indicator 2018-11-29 12:35:31 -06:00
Jacob Jordan 8be91677df Fix Skew factors (#12555)
- Ensure Skew factors are calculated from test square measurements
2018-11-29 11:39:31 -06:00
Scott Lahteine 03ef2d6c82
Fix "paused" message and M125 called by M25 (#12551) 2018-11-28 19:28:31 -06:00
Scott Lahteine 95d154a91f Fans loop macro 2018-11-28 16:45:08 -06:00
Scott Lahteine 61db0b65b6 Followup to heating progress 2018-11-28 14:47:43 -06:00
Scott Lahteine 4f9ec9ab45
Add heating progress bars (#12543) 2018-11-27 21:15:52 -06:00
Scott Lahteine 929a513a6b
Add poll_runout_states, which returns 1 for runouts (#12547) 2018-11-27 20:13:24 -06:00
Scott Lahteine 01b5c810d5 Space out multiple edit lines a bit 2018-11-27 18:10:19 -06:00
Scott Lahteine cd88ea2106 Fix runout debug output
Followup to #12544
2018-11-27 18:10:19 -06:00
Scott Lahteine cecc238f68 Save recovery info on SD pause 2018-11-27 14:42:19 -06:00
Marcio Teixeira 439a3e8463 Improve runout sensor, fix LIGHTWEIGHT_UI screen size (#12544) 2018-11-27 13:45:25 -06:00
Scott Lahteine 5b24ce9024 Hide M217 compile warning 2018-11-26 16:52:16 -06:00
David Bates d94b50a3d8 Add sample config for Delta with MKS SBASE (#10819) 2018-11-25 21:23:02 -06:00
InsanityAutomation dec721c52b Add Formbot Raptor2 and Raise3D pins (#12532)
* Add Formbot Raptor2 board
* Add Raise3D Rumba board
2018-11-25 19:56:06 -06:00
Scott Lahteine 6aae199572 Add missing boards to Makefile 2018-11-25 19:11:09 -06:00
Scott Lahteine 0a638cc022 Adjust Formbot Raptor pins 2018-11-25 18:35:45 -06:00
Ludy e5019a0481 Fix English special symbols (#12529) 2018-11-25 18:19:12 -06:00
Scott Lahteine 09d6db491a Fix wait_for_bed compile error 2018-11-25 18:05:41 -06:00
Roman Moravčík d545f984b0 Update Slovak translation (#12523) 2018-11-25 17:44:51 -06:00
Ludy 730f223100 Correct FANMUX2_PIN (#12538) 2018-11-25 17:27:41 -06:00
Yücel Temel d857cdfb27 Update Turkish language (#12524) 2018-11-25 17:26:26 -06:00
Scott Lahteine 4a7c6f7241 NUM_ARRAY => COUNT 2018-11-24 00:27:45 -06:00
Giuliano Zaro 31113c5adf Update Italian language (#12512) 2018-11-24 00:26:54 -06:00
Scott Lahteine b57343c255 Put status screen options in Configuration_adv.h 2018-11-23 23:15:07 -06:00
Scott Lahteine 1fcc13b011 Allow Serial Overrun Protection to be disabled 2018-11-23 21:07:38 -06:00
Scott Lahteine 29c53f2402 Hide some compile warnings 2018-11-23 21:07:38 -06:00
Scott Lahteine caca3c8503 Use wait_for_bed with WAIT_FOR_BED_HEATER
Addressing #12517
2018-11-23 20:39:23 -06:00
Scott Lahteine f1efcfed14 Fix backslash in language_test.h 2018-11-23 20:39:23 -06:00
Yücel Temel 3b186a55ac Don't show superscript ³ with NOT_EXTENDED_ISO10646_1_5X7 (#12513) 2018-11-23 20:16:51 -06:00
Scott Lahteine 82c96c971e Bring superscripts slightly lower in BDF fonts 2018-11-23 20:02:34 -06:00
Sinisa Culic 8a0992d921 Fast PWM for controller fan (#12485) 2018-11-23 16:03:39 -06:00
Ludy e98d195901 Remove extra declarations in cardreader.cpp (#12520) 2018-11-23 15:58:20 -06:00
Scott Lahteine fd2998efd5
Revert ADC_KEYPAD direction behavior (#12508) 2018-11-22 06:00:00 -06:00
Scott Lahteine d29cb09b3e Fix a minor compile warning 2018-11-22 05:35:38 -06:00
Yücel Temel 5b1d52671c Use superscript 3 in language_en.h (#12504) 2018-11-22 02:27:28 -06:00
Marcio Teixeira 7109dadd21 Additional pin definitions for Archim 2 (#12500)
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
2018-11-22 01:07:02 -06:00
Andy Shaw 4975b13b74 Fix problems with LPC1768 EEPROM flash emulation (#12503)
* Remove duplicate calls to PrepareSector

Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required.

* Ensure correct alignment of RAM buffer

The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.
2018-11-22 01:03:32 -06:00
Scott Lahteine b738972e69 General cleanup of Re-ARM pins 2018-11-21 19:00:49 -06:00
Scott Lahteine ee423dcdd0 Invert hotend bitmaps, by default 2018-11-21 01:02:06 -06:00
Scott Lahteine c5642a894f
Fix ADC_KEYPAD middle button (#12493) 2018-11-20 21:39:30 -06:00
Scott Lahteine 0946cbcdca Revert some const changes (for now) 2018-11-20 08:19:48 -06:00
Scott Lahteine 4def8b3b5e Expanded options for _Statusscreen.h (#12455)
See the PR for full details. The updated system will be documented on the website in the near future.
2018-11-20 07:50:37 -06:00
Scott Lahteine d51e5690f4 Don't show updir with no card present 2018-11-20 07:01:46 -06:00
Scott Lahteine ec9d21a234 Shift YZ on graphical display to fit Z+123.45 2018-11-20 06:58:18 -06:00
Scott Lahteine 817a37169a Apply/unapply const here and there 2018-11-20 06:44:21 -06:00
Scott Lahteine 643e0066a0 Followup to #12451 2018-11-20 06:27:19 -06:00
Marcio Teixeira 4bcb63b705 Fix for #12482 (#12483)
Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)
2018-11-20 00:04:11 -06:00
Marcio Teixeira 50ee747787 Fix compilation errors. Followup to #12439 (#12481) 2018-11-20 00:02:13 -06:00
Ludy 90a58488b5 Corrected unused var, default switch, Travis tests (#12477) 2018-11-19 23:59:48 -06:00
Scott Lahteine a4c15dc54f
Modify MBL to use IJ instead of XY (#12478) 2018-11-19 09:08:15 -06:00
Scott Lahteine fc3f1c4572 Get u8g reference for lcdprint 2018-11-19 06:23:15 -06:00
Scott Lahteine 88c57eaf55
Clean up some u8g code (#12476) 2018-11-19 01:33:59 -06:00
Ludy 1f93d2bcf7 Fix LCD compile error, etc. (#12472) 2018-11-18 20:39:49 -06:00
Scott Lahteine 826d570162
Combine Travis CI option-setting commands (#12474) 2018-11-18 19:58:02 -06:00
Scott Lahteine 9d13f07d09 GTM32 Pro VB changes from Markku Sinisalo 2018-11-18 19:56:38 -06:00
Roman Moravčík 5fbe5cabc8 Fixed displaying of kill MSG_OUTAGE_RECOVERY string. (#12470) 2018-11-18 18:05:29 -06:00
kAdonis 4ae9a06c60 Update M303.cpp (#12471) 2018-11-18 18:04:51 -06:00
Ludy c0b75f49b6 Fix "no effect" and "unused variable" compile warnings (#12473) 2018-11-18 17:54:00 -06:00
Nils Hasenbanck 5a4fd8e0a6 Fix access to the DWT peripheral for STM32 HAL (#12434)
Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core.

This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.
2018-11-18 01:30:46 -06:00
Scott Lahteine 7f225b9421 Fix MAX_MESSAGE_LENGTH 2018-11-18 01:11:26 -06:00
Scott Lahteine 06674a321a Remove extra include 2018-11-18 00:34:07 -06:00
Marcio Teixeira c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 2018-11-17 22:21:44 -06:00
Giuliano Zaro d3605cfc26 Don't start watching heaters when target is 0 (#12453) 2018-11-17 21:53:52 -06:00
Ludy 93e958f695 Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS (#12466) 2018-11-17 21:21:30 -06:00
Ludy 22d7fed60a Fix compile error with SD_FIRMWARE_UPDATE (#12462) 2018-11-17 21:13:36 -06:00
Nils Hasenbanck 779b2709ec Change temperature pin order for RemRam V1 (#12458)
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
2018-11-17 16:51:06 -06:00
Scott Lahteine 8ebb4dc294 Followup to static CardReader 2018-11-17 07:52:35 -06:00
Scott Lahteine 7ee5894360 Allow float XY probe offsets
Responding to #12383

XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.
2018-11-17 07:44:47 -06:00
Giuliano Zaro 43ecdb606f Fix a compile warning (#12452) 2018-11-17 07:08:25 -06:00
Ph0non 984c4ba8c7 Enable SD Card on RepRap Display and RADDS (#12446)
* Enable SD Card on RepRap Display and RADDS

Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
2018-11-17 06:59:40 -06:00
Ludy 56a94c2a26 Use 'target_extruder' in M104 as with M109 (#12448) 2018-11-17 06:55:25 -06:00
Scott Lahteine 66580f32c2
Make CardReader class static (#12451)
* Make CardReader a static class
* Make CardReader flags into bitfields
2018-11-16 22:39:16 -06:00
Scott Lahteine 3e9ffaddb6
Consolidate, optimize some LCD menu code (#12450) 2018-11-16 21:44:48 -06:00
Scott Lahteine d97e31db4c
Optimize Power-Loss Recovery (#12440) 2018-11-16 20:47:07 -06:00
Mateusz Krawczuk ca21ac6b9b Support two MAX6675 thermocouples (#8686) 2018-11-16 18:20:33 -06:00
Scott Lahteine 0e610815e4 No need for Cap:PAREN_COMMENTS 2018-11-16 04:28:40 -06:00
Scott Lahteine 7a075a5dc9 Tweak extruder errors 2018-11-16 01:32:21 -06:00
Scott Lahteine 2d92f333f5 Fix GcodeSuite::T active_extruder reference 2018-11-15 14:07:24 -06:00
Scott Lahteine d2bb53702a
Optimize target_extruder, ignore T with mixing (#12432)
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
2018-11-14 17:33:04 -06:00
Marcio Teixeira 5e586a6b39 Fix to runout sensor code. (#12431)
- "old_state" is no longer a class static variable.
2018-11-14 16:54:05 -06:00
Scott Lahteine d82c350de7
Miscellaneous LCD code renaming, reordering (#12430)
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
2018-11-14 13:13:51 -06:00
Scott Lahteine edfd106bc5
Rejigger Filament Runout class (#12428) 2018-11-14 11:45:57 -06:00
Scott Lahteine f4c128ecaa
Move RRW keypad code to a common method (#12429) 2018-11-14 06:00:21 -06:00
Scott Lahteine 54ec5528a0 hasstatus => has_status 2018-11-14 01:34:28 -06:00
Scott Lahteine ebf585b673 Fix an old sanity check 2018-11-14 01:15:35 -06:00
Ryan 052d102ded UltiMachine Archim 1 support (#12404) 2018-11-14 00:27:39 -06:00
Scott Lahteine 664e20754d Clean up pins files 2018-11-14 00:23:33 -06:00
Scott Lahteine 1eb5249598 Fix Formbot Trex-2+ configs
Followup to #12422
2018-11-13 21:53:54 -06:00
thiagodesacosta 075a22ed65 Update Portuguese-Brazilian translation (#12402) 2018-11-13 19:42:25 -06:00
Marcio Teixeira 3ceab8474c Add required "cardreader.h" include (#12419) 2018-11-13 17:12:44 -06:00
Giuliano Zaro 98c2fc4e42 Endstops fix followup (#12423)
Followup to #12413
2018-11-13 17:10:07 -06:00
Roxy-3D f19fd642ce
Updates to Formbot T-Rex 2+ configuration files (#12422)
Updates to Formbot T-Rex 2+ configuration files
2018-11-13 13:48:35 -06:00
Roxy-3D cda5ef08fa
Debug of G2-G3 for UBL (#12386)
Changes only affect UBL.  Everything else is left alone.
2018-11-13 11:20:21 -06:00
AnHardt 9ad3aed0ef Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools (#12417)
Fix #12416

Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` -  to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.
2018-11-13 04:56:10 -06:00
Giuliano Zaro d631267548 Refine endstops fixes (#12413)
When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.
2018-11-13 04:31:58 -06:00
Scott Lahteine 0ee1a92971
Group status methods, share reset_status with Extensible UI (#12414)
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
2018-11-13 01:47:45 -06:00
Scott Lahteine 690c4e8457 Clean TLM trailing whitespace 2018-11-13 00:03:34 -06:00
Scott Lahteine 143b2896e0
Add M412 to enable/disable filament runout detection (#12406) 2018-11-12 21:29:46 -06:00
Scott Lahteine a163c89c6a Followup to 50af1d1 2018-11-12 20:31:53 -06:00
AnHardt be6271767f Fix BABYSTEP_ZPROBE_OFFSET (#12408)
Fix #12399

Did not compile without  `WATCH_HOTENDS || WATCH_THE_BED`.
Add condition to include "../../module/temperature.h".
2018-11-12 17:44:21 -06:00