zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
4534 commits 1 branch 0 tags 156 MiB
Commit graph

3658 commits

Author SHA1 Message Date
Scott Lahteine 5cba0210f2 Small patch to Z_SAFE_HOMING comment 2016-03-06 05:51:58 -08:00
Scott Lahteine 6165fd41a5 Fix Hephestos 2 and other configs 2016-03-06 05:51:58 -08:00
Scott Lahteine 71718d888a Fix typos in check_axes_activity 2016-03-06 05:51:58 -08:00
Lukas Abfalterer 83795d3e63 deleted double used comments 2016-03-06 05:51:58 -08:00
jbrazio 143ad74db7 Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config 
files.
 2016-03-06 05:51:58 -08:00
jbrazio b0f5ba0232 Update the PROBE_OFFSET_FROM_EXTRUDE comment section 
This changes have being discussed at MarlinFirmware/Marlin#2849.
 2016-03-06 05:51:57 -08:00
jbrazio 02b131b552 Replaced stock BQ PID values with fine tuned ones generated using M303 2016-03-06 05:51:57 -08:00
jbrazio 45dc8a51f3 Added readme file for bqh2 and disabled the SLOWDOWN config flag 2016-03-06 05:51:57 -08:00
Scott Lahteine 6a21180bd4 Implemented BQ ZUM Mega 3D board layout as an override to RAMPS 1.3 2016-03-06 05:51:57 -08:00
jbrazio b18816fcbf Fine tuned XYJERK. 
Disallowed the Z_PROBE_OFFSET_RANGE_MAX to be greater than zero.
 2016-03-06 05:51:57 -08:00
jbrazio be83036212 Applying suggestions by @thinkyhead at MarlinFirmware/Marlin#3049. 
- Remove the forced activation of SDSUPPORT, I guess people may use the ZUM
3D board and not the LCD module.
 - Fixed the tab issue within boards.h file.
 2016-03-06 05:51:56 -08:00
jbrazio b82d91eca6 Added configuration example for the BQ Hephestos 2 3D printer. 
Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.
 2016-03-06 05:51:56 -08:00
Scott Lahteine 45bcc43e48 Don't override SOURCE_CODE_URL in Default_Version.h 
- Defining `SOURCE_CODE_URL` in `Default_Version.h` overrides it
elsewhere. So don’t define it there.
- Also fix up `language.h` so no `#undef` will be needed.
 2016-03-06 05:51:56 -08:00
Scott Lahteine ef68c1910c Check that the temperature is close to target 2016-03-06 05:51:56 -08:00
Scott Lahteine ea9fd1200b Fix M109 so it won't wait for cooling 
Addressing issue #2767
 2016-03-06 05:51:56 -08:00
Scott Lahteine e4945b30d2 sbi and cbi are deprecated 2016-03-06 05:51:55 -08:00
Scott Lahteine ff13070b59 Use _BV macros, patch up others 2016-03-06 05:51:55 -08:00
Scott Lahteine 209f5f21e0 Use macros where possible 
Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros
wherever possible.
 2016-03-06 05:51:55 -08:00
Scott Lahteine c8f76bb8aa Create BITSET/BITCLR macros 2016-03-06 05:51:55 -08:00
Scott Lahteine adc25db8c4 Merge pull request #3005 from thinkyhead/rcbugfix_eeprom 
Fix layout descr. in configuration_store.cpp
 2016-03-06 00:31:44 -08:00
Scott Lahteine e7cf85b922 Merge pull request #3013 from thinkyhead/esenapaj-patch-1 
Enhanced #3010 - formal Mesh/Manual dependency
 2016-03-06 00:30:02 -08:00
Scott Lahteine 6e64895c30 Merge pull request #3001 from AlwaysTinkering/RCBugFix 
Rc bug fix - Fix for issue #2931
 2016-03-06 00:20:29 -08:00
Scott Lahteine 34b8b9f0f5 Merge pull request #2995 from thinkyhead/rcbugfix_corexy_corexz 
Add CORE support to st_get_position_mm (and elsewhere)
 2016-03-06 00:17:03 -08:00
Scott Lahteine 1e20949afb Merge pull request #3092 from thinkyhead/rc_2860_printrbot_lcd 
Fix Printrboard with LCD (redo)
 2016-03-06 00:14:29 -08:00
Scott Lahteine f5972c4d2c Merge pull request #2994 from AnHardt/Inerrup-save-serial 
Interrupt safe serial --- Guard against non-atomic variable changes from interrupt routines
 2016-03-05 22:25:12 -08:00
Scott Lahteine 3a3d358df9 Fix Printrboard with LCD (redo) 
Based on #2860 - rebased for RCBugFix
 2016-03-05 22:13:00 -08:00
Scott Lahteine eb85342fd9 Merge pull request #2989 from AnHardt/fix2661 
Pre home display - Stepper release
 2016-03-05 21:30:17 -08:00
Scott Lahteine 14f3ca1b2e Merge pull request #2978 from thinkyhead/tool_offset_abl_rcbugfix 
Apply bed leveling matrix when switching extruders
 2016-03-05 21:23:25 -08:00
Scott Lahteine 91fcdc2b99 Merge pull request #3090 from thinkyhead/rc_spelling 
Various minor spelling corrections
 2016-03-05 20:50:34 -08:00
Scott Lahteine 772460a7b8 Various minor spelling corrections 
Redo of #2939 rebased against RCBugFix
 2016-03-05 20:41:15 -08:00
lrpirlet 0fb507a75d correct raise_z_for_servo 2016-03-05 20:19:53 -08:00
Scott Lahteine 04a0d45c22 Merge pull request #2821 from MarlinFirmware/ReinitializeDisplay 
Fix status LEDs update when reinitializing the display
 2016-03-05 15:31:49 -08:00
Blue-Marlin b4e5e0f11d Add Watchdog reset in kill() 
Add watchdog reset in the kill loop to simplify recovering.
 2016-03-04 00:35:18 +01:00
Scott Lahteine 547d35a921 Merge pull request #3067 from Blue-Marlin/ALARM_PIN 
Remove unused ALARM_PIN
 2016-03-02 20:20:26 -08:00
Scott Lahteine 79778d46d9 Merge pull request #3066 from Blue-Marlin/Fix-disable_all_heaters() 
Fix disable_all_heaters() for MAX6675
 2016-03-02 17:35:08 -08:00
Blue-Marlin a68228bf55 Remove unused ALARM_PIN 
Remove unused ALARM_PIN from all the Configuration.h's
 2016-03-02 14:29:49 +01:00
Scott Lahteine 9eb4aceee4 Merge pull request #2986 from thinkyhead/enable_watchdog 
Enable USE_WATCHDOG by default
 2016-03-02 05:29:42 -08:00
Blue-Marlin 0631541166 Fix disable_all_heaters() for MAX6675 2016-03-02 14:17:23 +01:00
Scott Lahteine 222d13d5ed Merge pull request #3051 from thinkyhead/rcbugfix_dual_axis_offset 
Code cleanup in gcode_T
 2016-03-02 03:45:40 -08:00
Scott Lahteine 186629aee8 Merge pull request #3057 from jbrazio/3034-z_raise_after_probing_fix 
Fix Z_RAISE_AFTER_PROBING for non DELTA printers
 2016-03-02 03:14:27 -08:00
Scott Lahteine a42fb35c56 Merge pull request #3050 from Blue-Marlin/fix-1166 
Temporary workaround for stack overflow
 2016-03-01 11:33:19 -08:00
jbrazio 67e15aac3d As pointed out by @Blue-Marlin the previous code would raise the Z axis 
twice for a servo based probe.
 2016-03-01 00:22:48 +00:00
jbrazio 17cc2a9663 Z_RAISE_AFTER_PROBING value was being ignored by Marlin because 
raise_z_after_probing() was only called if the printer type was set to a
DELTA or if the printer had a docking sled for the probe.
 2016-02-29 15:48:26 +00:00
Scott Lahteine 252f4a75cd Merge pull request #3043 from oxivanisher/RCBugFix 
Example configuration for Kossel XL
 2016-02-28 23:57:13 -08:00
Scott Lahteine fd1243c184 Merge pull request #3052 from thinkyhead/rc_fix_m145_eeprom_output 
Fix "M145" output in M503 report
 2016-02-28 23:43:08 -08:00
Scott Lahteine 0bc648353f Merge pull request #3031 from tnw513/RCBugFix 
Fix board type for Hephestos: RAMPS 1.4
 2016-02-28 23:23:01 -08:00
AnHardt f27c2b6b4b Reimplement #2892 
Include #2892 to fix the isHeating symbol in the extruder graphics
 2016-02-28 23:20:30 +01:00
AnHardt 615bec2329 Activate warning about possible reduced accuracy by default 
Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING`

Changed the condition for blinking from
```
#if ENABLED(WARN_REDUCED_ACCURACY)
```
to
```
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
```
 2016-02-28 23:20:21 +01:00
AnHardt 1c889cd303 Refresh previous_cmd_ms during run_z_probe() 
Refresh previous_cmd_ms during run_z_probe() to prevent:
stepper shutdown for expired DEFAULT_STEPPER_DEACTIVE_TIME
and extrudes for expired EXTRUDER_RUNOUT_SECONDS
(https://github.com/MarlinFirmware/MarlinDev/issues/238)
 2016-02-28 23:20:12 +01:00
AnHardt 4b02f33e69 Distribute config-changes to the other configurations 2016-02-28 23:20:04 +01:00
AnHardt be24fdacea The same changes to the axis-letters now for the char-displays 
Exactly the same - copy/paste.
 2016-02-28 23:19:54 +01:00
AnHardt 5b0f659355 Changes for graphics displays 
Replaced displaying "---" instead of the value of a coordinate when
unhomed or with reduced precision
with blinking the coordinate-prefix-character ('X','Y','Z').
For "unhomed" a '?' is shown every second second - until that axis is
homed. The value displayed is, as before the "---" where displayed, the
relative to the reset position coordinate value.
When the axis stepper was disabled, now we can display a hint on that,
by showing a blinking ' ' instead of the axis letter, when
WARN_REDUCED_ACCURACY is defined.

I suppose the code itself is here the better documentation.

A '+/-' character is in non of our charsets so i decided for a '?' for
now to reduce the work.
There is no additional space on the displays one could use to display
the information, so replacing something is the only option. As the axis
letters are totally redundant with their positions on the display they
contain the least information.
So my decision was to overwrite them.
 2016-02-28 23:19:32 +01:00
AnHardt 32ae9f9ab7 Fix stepper shutdown during waiting for temperatures 
In the wait loops of M109 M190 idle() is called, what checks
stepper_inactive_time against previous_cmd_ms.
Because we can be several minutes inside the loop, resetting
previous_cmd_ms only outside the loop caused stepper shutdowns.

The name of previous_cmd_ms does not really reflect its use. It's set
not only when a new command was received or executed but also in many of
the movement routines. For that the little extension of using it during
the wait will (hopefully) not hurt.

# Conflicts:
#	Marlin/Configuration_adv.h
 2016-02-28 16:58:50 +01:00
AnHardt b6e69e71ce Make stepper shutdown after inactivity dependent 
Make stepper shutdown after inactivity dependent on a new set of
#defines.
DISABLE_INACTIV_X
DISABLE_INACTIV_Y
DISABLE_INACTIV_Z
DISABLE_INACTIV_E

And make exemplaric Configuration.
Names can be discussed.

This makes the disabling of the steppers independent from the DISABLE_?
settings witch shut down the steppers immediately.
 2016-02-28 16:58:42 +01:00
AnHardt 051325ccd7 Introduce axis_homed 
Introduce additional variable axis_homed to replace axix_known_position
when the coordinate display should indicate the axis is not homed.
This is to distinguish between "not homed" and "inexact position possible
because stepper was disabled".

# Conflicts:
#	Marlin/ultralcd_implementation_hitachi_HD44780.h
solved
 2016-02-28 16:58:28 +01:00
AnHardt e736779d7e blink for char-lcds 
Implement and test blinking for char-lcds

# Conflicts:
#	Marlin/ultralcd_implementation_hitachi_HD44780.h
solved
 2016-02-28 16:58:19 +01:00
Scott Lahteine 7253a1971d Fix "M145" output in M503 report 2016-02-27 22:28:08 -08:00
Scott Lahteine d118e3f985 Merge pull request #3044 from thinkyhead/rc_gcode_spaces 
Fix GCode handling of spaces between command letter and first digit
 2016-02-27 22:21:28 -08:00
Scott Lahteine 100271e6ac minor cleanup in gcode_T 2016-02-27 19:56:56 -08:00
Blue-Marlin fd9e94e5a4 Fix crashes when the Z axis is moved via LCD 
Fix crashes when the Z axis is moved via LCD
by calling `plan_buffer_line` only when there is enough room in the
planner buffer, to avoid endless recursion.
A brief description about what went wrong is in #1166
 2016-02-28 00:59:47 +01:00
Scott Lahteine 8dccd5a7ea Merge pull request #3018 from CONSULitAS/RCBugFix_K8200_backinsync 
K8200: sample config back in sync
 2016-02-27 05:22:12 -08:00
Scott Lahteine 6a4f06d35d Fix GCode handling of spaces between command letter and first digit 2016-02-26 18:42:59 -08:00
Marc Urben 68eae2b5a8 added kossel xl example configuration 2016-02-27 01:48:45 +01:00
Silvio Didonna eb5817675d Fix board type: RAMPS 1.4 2016-02-25 15:52:41 +01:00
AnHardt cb88fdd242 Protect MarlinSerial against interrupts 
Protect MarlinSerial against interrupts
by shielding the CRITICAL_SECTIONs

Now with a test if RX_BUFFER_SIZE is in the required range.
Code in peek() and read() is now optimized for readability and showing the similarity between the two.

Maybe a bit overprotected in checkRx() and store_char(), but now some days without detected errors from this source.
 2016-02-24 17:18:12 +01:00
AnHardt dc0f41868e Make rx tail/head atomic 2016-02-24 15:51:34 +01:00
CONSULitAS ea8409ad5d Fix: current_command_args contains command 
@thinkyhead
Hi Scott,
your code from a0f362c@thinkyhead is great, but you forgot to skip the
command.
Symptom `M117 Test`shows `M117 Test` on LCD instead of `Test`.

see also
https://github.com/MarlinFirmware/Marlin/commit/a0f362c735401ebbcd95de3f
6f8e3c2f17ecc770 lines 941, 2851 and so on

Greetings and welcome back

Jochen
 2016-02-24 09:35:04 +01:00
Scott Lahteine 9a3408e58f Merge pull request #3024 from thinkyhead/rc_remove_steps_mm_e 
Remove obsolete STEPS_MM_E setting
 2016-02-23 23:37:09 -08:00
Scott Lahteine 1093c780c8 Remove obsolete STEPS_MM_E setting 2016-02-23 01:11:58 -08:00
CONSULitAS a4fe6a45ae K8200: sample config back in sync 
* Configuration.h:
  * updated header comment
  * new UUID feature used
  * sync to default config
  * typos fixed
  * changes better documented
  * reflect change in SDSUPPORT feature
* Configuration_adv.h
  * updated header comment
  * thermal protection tuned to work with K8200
  * homing tuned
  * sync to default config
  * typos fixed
  * changes better documented
  * reflect change in LCD features
  * use long filenames
  * use Watchdog
  * use Babystepping
  * use Auto Filament Change
 2016-02-21 16:06:25 +01:00
Scott Lahteine c2e5c6c12c Nest Manual Bed Leveling options 
This formalizes the dependency of MANUAL_BED_LEVELING on
MESH_BED_LEVELING
 2016-02-20 20:35:10 -08:00
Scott Lahteine 042a6a0a37 Extend existing MESH_BED_LEVELING test 2016-02-20 20:35:10 -08:00
esenapaj 08b3147791 sanity check for MANUAL_BED_LEVELING 2016-02-20 20:35:10 -08:00
Scott Lahteine 9f8e6dce20 Merge pull request #2942 from esenapaj/esenapaj-patch-2 
more suitable display format for delta printer
 2016-02-18 17:59:35 -08:00
Scott Lahteine e1beaf61eb Merge pull request #2985 from AnHardt/adv-ok 
Repair N in ADVANCED_OK
 2016-02-18 17:06:26 -08:00
esenapaj 34cde1b77c Merge pull request #14 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-02-19 09:19:23 +09:00
Scott Lahteine f00ca3fd89 Fix layout descr. in configuration_store.cpp 2016-02-17 19:44:04 -08:00
Scott Lahteine 0c9db67273 Merge pull request #2983 from AnHardt/ok-echo 
Replace the "ok" in M280, M301, M304, M851 with output not including …
 2016-02-17 19:09:41 -08:00
Scott Lahteine fbfbc5e330 Enable USE_WATCHDOG by default 2016-02-17 17:14:57 -08:00
Scott Lahteine d4e7c2d694 Merge pull request #2976 from thinkyhead/drop_configurator 
Drop the experimental Configurator
 2016-02-17 17:08:08 -08:00
Scott Lahteine 9df0e0e0cc Merge pull request #2974 from thinkyhead/sanitycheck_spi_speed 
Sanity-check deprecated options replaced by SPI_SPEED
 2016-02-17 17:07:58 -08:00
Scott Lahteine 3e2473e695 Merge pull request #2988 from thinkyhead/z2_more_extruders 
Use next open E connector for Y2/Z2
 2016-02-17 17:07:07 -08:00
Scott Lahteine 8eaba020fb Merge pull request #2973 from thinkyhead/fix_splash_url 
Remove references to marlinfirmware.org
 2016-02-17 17:05:06 -08:00
Scott Lahteine 438a87eba8 Sanity check deprecated SDSLOW, SDEXTRASLOW 2016-02-17 14:54:10 -08:00
Scott Lahteine b19b272172 Update configurations with SPI_SPEED 
- Include aligned comment about new SDSUPPORT behavior
 2016-02-17 14:54:09 -08:00
Scott Lahteine 7f30f85602 Merge pull request #2987 from thinkyhead/gcode_allow_no_initial_space 
Fix handling of spaces in GCode
 2016-02-17 14:51:19 -08:00
Scott Lahteine b81d3b83cf Drop the experimental Configurator 
Development moved to https://github.com/thinkyhead/MarlinConfigurator
 2016-02-17 14:49:37 -08:00
Scott Lahteine be691b51f1 Remove references to marlinfirmware.org 
The domain is gone and doesn’t redirect, so for now show no URL on the boot screen.
 2016-02-17 14:41:46 -08:00
Scott Lahteine f3f58bd619 Merge pull request #2992 from thinkyhead/rc_rename_fpos_t 
Rename fpos_t to avoid libc conflict
 2016-02-17 14:40:33 -08:00
Scott Lahteine 83ffc9eb4f Show raw steps in M114 
This is a proposed change. This section of M114 output is a debug
extension according to RepRap wiki.
 2016-02-15 15:59:24 -08:00
Scott Lahteine 373e8a1ad4 Fixes for COREXY and COREXZ coordinates 2016-02-15 15:59:24 -08:00
unknown 31656e68bc Fix for homing X and Y before raising Z when Z_SAFE_HOMING is set. 2016-02-15 15:53:40 -06:00
unknown 8ea55323d8 Fix for not raising Z before homing X and Y 2016-02-15 14:52:04 -06:00
Scott Lahteine b83e472bd3 Rename fpos_t to avoid libc conflict 2016-02-10 20:49:25 -08:00
Scott Lahteine 68457ee903 For Dual Y/Z use the next available extruder pins 2016-02-09 21:59:09 -08:00
Scott Lahteine 711e5db19a Tweak comment in process_next_command 2016-02-09 18:16:35 -08:00
Scott Lahteine 400e9329be Allow spaces after a code letter 2016-02-09 18:03:13 -08:00
Scott Lahteine cdcb80f3c5 Allow no-space after initial command 
Addresses issue #2715
 2016-02-09 18:00:35 -08:00
AnHardt 6f473f7fc6 Repair N in ADVANCED_OK 
Send the correct line number.
If no N was in the command - non't send an N.
 2016-02-09 19:23:26 +01:00
AnHardt efbd705eda Replace the "ok" in M280, M301, M304, M851 with output not including an "ok" 
Replace the "ok" in M280, M301, M304, M851 with output not including an "ok"
to avoid senting two "ok"s for a single g-code.

Doing the same for M105 would break the input filters of the hosts.
For M105 the other "ok" is omitted.
 2016-02-09 13:36:03 +01:00
Scott Lahteine 8e66028d25 Apply the ABL rotation matrix to the extruder offset. 2016-02-08 14:22:18 -08:00
esenapaj ab5aa3fc92 Merge pull request #5 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-02-08 05:42:11 +09:00
esenapaj 27d918d836 Merge pull request #4 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-02-08 05:35:32 +09:00
Scott Lahteine 159ff94afd Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977 2016-02-07 08:02:11 -06:00
Ruwan J Egoda Gamage 1270fbfd38 Using SET_INPUT instead of pinMode 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage b58083b0fa Getting rid of SDEXTRASLOW, SDSLOW variables. 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage 1833049b8a reusing millis() 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage 1b7c443628 Adding SDULTRASLOW variable. 
Instead of changing SDEXTRASLOW variable to a slower speed,  the new
SDULTRASLOW is used for rigidbot panel.
 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage 6f9e9c0e4f Cleaning up, getting rid of the fake encoder count variable. 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage becbfe1065 Fixing Rigidbot LCD Panel Support 2016-02-07 07:58:52 -06:00
esenapaj 4882a7eded more suitable display format for delta printer 2016-01-29 18:38:25 +09:00
esenapaj d7272e3f36 Merge pull request #3 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-01-29 05:43:22 +09:00
Scott Lahteine 62bad1b60f Merge pull request #2848 from japzi/RCBugFix 
Fixing Rigidbot LCD Panel Support
 2016-01-26 17:30:12 -08:00
esenapaj 59d345a3dd Update Configuration.h 2016-01-22 07:27:11 -06:00
esenapaj b8f0c8a4c7 Update Configuration.h 2016-01-22 07:27:11 -06:00
esenapaj df0d599c79 Update Configuration.h 2016-01-22 07:27:11 -06:00
esenapaj a366697649 Update Configuration.h 2016-01-22 07:27:11 -06:00
Richard Wackerbarth 7c94c83765 Repair formula mangled by PR#1319 in Jan 2015 2016-01-15 10:06:27 -06:00
Naruto-kyun 2932602643 Update stepper.cpp 
Forgot Z2_MIN_PIN
 2016-01-15 16:50:43 +01:00
Ruwan J Egoda Gamage 06555febdd Using SET_INPUT instead of pinMode 2015-12-24 12:12:25 -05:00
esenapaj 8d2aa2368d Update Configuration_adv.h 2015-12-23 08:16:36 +09:00
esenapaj 0de5fcad0a Update Configuration_adv.h 2015-12-23 08:16:06 +09:00
esenapaj 1403b9acc0 Update Configuration_adv.h 2015-12-23 08:15:20 +09:00
esenapaj 5cf1c38ea1 Update Configuration_adv.h 2015-12-23 08:12:54 +09:00
esenapaj 04ab61bf40 Update Configuration_adv.h 2015-12-23 08:12:28 +09:00
esenapaj 39c62fbd6f Update Configuration_adv.h 2015-12-23 08:12:04 +09:00
esenapaj efcb769003 Update Configuration_adv.h 2015-12-23 08:09:57 +09:00
esenapaj 992fbb831d Update Configuration_adv.h 2015-12-23 08:08:45 +09:00
esenapaj 5ee6fe6385 Update Configuration_adv.h 2015-12-23 08:07:12 +09:00
esenapaj 056daf00fc Update Configuration_adv.h 2015-12-23 08:06:15 +09:00
esenapaj 71aafb79a0 Update Configuration_adv.h 2015-12-23 08:03:54 +09:00
Ruwan J Egoda Gamage 2c9e0415c7 Getting rid of SDEXTRASLOW, SDSLOW variables. 2015-12-13 23:23:01 -05:00
Ruwan J Egoda Gamage a64bcd53e9 reusing millis() 2015-12-13 22:06:03 -05:00
Ruwan J Egoda Gamage e6cc232184 Adding SDULTRASLOW variable. 
Instead of changing SDEXTRASLOW variable to a slower speed,  the new
SDULTRASLOW is used for rigidbot panel.
 2015-12-13 15:47:10 -05:00
Ruwan J Egoda Gamage 83c4131ba3 Cleaning up, getting rid of the fake encoder count variable. 2015-12-13 15:28:40 -05:00
Ruwan J Egoda Gamage 5eeea2f611 Fixing Rigidbot LCD Panel Support 2015-12-13 15:28:40 -05:00
Richard Wackerbarth f6950acb8e Residual unused variable — Backport 2015-12-10 19:48:08 -06:00
Richard Wackerbarth 7a670e3911 Improve planner & stepper PR #263 2015-12-10 07:24:37 -06:00
Richard Wackerbarth 58658c9279 Call the probe pin a probe pin and not a min endstop 2015-12-10 07:20:52 -06:00
Richard Wackerbarth 0fa3bac8ee If unused, just don’t define it. 2015-12-10 07:20:52 -06:00
Richard Wackerbarth 3b2973da6a Prepare Ramps for user redefinition 2015-12-10 07:20:52 -06:00
Richard Wackerbarth 1635613c25 Backport cosmetic 2015-12-10 07:20:52 -06:00
Richard Wackerbarth 0b429461d5 Back port Cosmetic changes 2015-12-10 07:20:52 -06:00
Richard Wackerbarth 0cebe85e65 Clean up spacing and duplicate entries 
• Removing trailing whitespace
• Adjusting indention for better readability
• Removing duplicated entries
 2015-12-10 07:20:52 -06:00
Richard Wackerbarth e7b40bbe98 Change link to U8glib source 2015-12-10 06:33:29 -06:00
Richard Wackerbarth e2da2b4105 Back port language translation 2015-12-10 06:31:41 -06:00
Richard Wackerbarth 4f314afaf0 Allow Thermistor #12 to be used on hotends also 
//100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)

Caveat Emptor —- 
I’m not sure that this really makes sense,
but why keep someone from using it?
 2015-12-10 06:31:31 -06:00
Scott Lahteine 60d5658da8 Revert nozzle_bed_fan_menu_items 
For some reason that I cannot determine, using a sub-function causes
the Tune sub-menu to act strangely, yet replacing the function call
with its code content works perfectly.
 2015-12-09 20:33:52 -06:00
AnHardt 57da1b8497 Host parseble output for M109, M190 and M303 
Make the output of M105 more similar to Repetier.
Make the text-print pert of M105 an extra function to make it reusable. `print_heaterstates()`
Use `print_heaterstates()` in M019, M190 and M303
 2015-12-07 15:37:53 -06:00
AnHardt fcceb98191 Unglobalize no_wait_for_cooling 2015-12-07 15:34:26 -06:00
Wurstnase 78a347a01a change nx, ny, nz and ne from float to long 
st_set_position takes long
```void st_set_position(const long& x, const long& y, const long& z, const long& e)```
 2015-12-07 08:22:44 -06:00
Wurstnase 6d691aceee change dx, dy, dz and de from float to long 
anything is long, we don't need float there
 2015-12-07 08:22:24 -06:00
Richard Wackerbarth 6bfcb74c25 The probe stowing coordinates have changed 2015-12-05 19:31:59 -06:00
Wurstnase 0fbfb22506 Renaming delta speeds (PR2824) 
dx -> dsx
dy -> dsy
dz -> dsz
de -> dse
 2015-12-04 07:55:45 -06:00
AnHardt 8d1eeff021 Fix status LEDs update when reinitializing the display 
Fix status LEDs update when reinitializing the display

By using the regular update function during init.

Fixing #2683
 2015-12-03 07:18:35 -06:00
Richard Wackerbarth 5a54204f72 Marlin 1.1.0 Release Candidate 3 - 01 December 2015 2015-12-01 07:24:45 -06:00
AnHardt bb4efcf603 Handle temp callbacks when THERMAL_PROTECTION_HOTENDS is not defined 
by alternate definition for the callback macros
 2015-12-01 07:21:52 -06:00
AnHardt 96d0d04b8f Update LCD buttons less frequently 
Move slow_buttons_update into the LCD_UPDATE_INTERVAL block
lcd_implementation_read_slow_buttons() will then be executed ~10 times a
second.
 2015-11-30 05:44:32 -06:00
Richard Wackerbarth e293ea57f0 Unbalanced brackets in setPwmFrequency 
This is a back port of the correct in issue #248
 2015-11-30 05:44:32 -06:00
AnHardt c956b52c4a Babystep Multiplier 
Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by
@RicardoGA

Restore the Babystep Multiplicator functionality and now it's available
for X/Y/Z
 2015-11-30 05:43:10 -06:00
Richard Wackerbarth 956418c674 Kc is also a multi-PID parameter 2015-11-23 06:08:01 -06:00
AnHardt 33addc52a1 Suppress Z_MIN_PROBE_REPEATABILITY_TEST for DELTA and SCARA configurations (PR#2747) 
For now Z_MIN_PROBE_REPEATABILITY_TEST is not possible for DELTA or SCARA
configurations.
This PR comments the feature out, where it is commented in by default.
 2015-11-13 07:33:33 -06:00
AnHardt 8da2e98985 Split RAMPS 1.3 an 1.4 (PR#2741) 
because of hardware differences on the SERVO0_PIN
 2015-11-13 07:13:48 -06:00
AnHardt be7167ed97 Change XY formatting on LCD (PR#2740) 
According to #123 negative values for XY at or below -100 are displaying incorrectly, dropping the first digit. Deltas can easily have XY values in this range. This PR adds a function to display floats/ints formatted like `_123`, `-123`, `_-12`, or `__-1` as appropriate and applies it to the XY coordinates on Hitachi displays. It also moves the Z value to the right to be consistent with the XY formatting.
 2015-11-13 06:46:11 -06:00
Luis Correia e7099ea597 Fix Portuguese (Portugal) strings (PR#2700) 
Align strings with release
 2015-11-12 00:08:42 -06:00
Scott Lahteine 754b13d8fe Patch issue #2315 2015-11-12 00:03:22 -06:00
Scott Lahteine dbd4c17096 Init Kp, Ki, Kd to 0 2015-11-12 00:03:22 -06:00
Scott Lahteine 644c376e84 Use binary OR with endstop bits 2015-11-12 00:03:22 -06:00
Scott Lahteine 54a39d8c1a Use a ternary in qr_solve.cpp 2015-11-12 00:03:22 -06:00
Scott Lahteine 17c23bbaf3 Shorten gcode_M221 yet function the same 2015-11-12 00:03:22 -06:00
Scott Lahteine c0e791dbe9 Only look for "N" line number as first parameter 2015-11-12 00:03:22 -06:00
Scott Lahteine b4af4441c5 Clean up watchdog impl. 2015-11-12 00:03:22 -06:00
Scott Lahteine 8f16563bbd Use "defined" with LCD_PIN_BL and LCD_PIN_RESET 2015-11-12 00:03:22 -06:00
Scott Lahteine 6fa7e24af3 Use "UNUSED" to squash compiler warnings 2015-11-12 00:03:22 -06:00
Scott Lahteine d5b7c595ae Use static locals in utf_mapper.h 2015-11-12 00:03:21 -06:00
Scott Lahteine 9bdab4f3a8 Clean up "else" and other spacing 2015-11-12 00:03:21 -06:00
Scott Lahteine 9b23490f01 Clean up spacing in configs 2015-11-12 00:03:21 -06:00
esenapaj c6c37abd41 Update language_kana.h 2015-11-12 00:00:51 -06:00
esenapaj c24045475a Update language_kana_utf8.h 2015-11-12 00:00:32 -06:00
Richard Wackerbarth 25d636c9e0 Compiler issues (PR#2696) 2015-11-11 23:52:11 -06:00
AnHardt 47401ec97b MSG_EXTRUDER_SWITCHED_OFF was renamed to MSG_REDUNDANCY 
in language.h, but was not renamed here. If TEMP_SENSOR_1 is enabled as redundant then
an error is thrown that MSG_EXTRUDER_SWITCHED_OFF is not defined.

Originaly by @12dstring
 2015-10-08 10:45:11 -05:00
Scott Lahteine ba6a243197 DEBUG message has no parameter (PR#2671) 2015-10-03 22:03:03 -05:00
Scott Lahteine 0c7f7ebcfb Styling adjustments (PR#2668 & PR#2670) 
Keep "astyled" reformatting
 2015-10-03 22:02:45 -05:00
Rafa Couto b5fb7075b9 Galician (gl) language. 2015-09-30 14:46:01 -05:00
Richard Wackerbarth 7b4bdc0203 DUAL_X_CARRIAGE motor enabling 
As noted by @darkjavi et.al. in #103, the E1 motor was not being enabled in planner.cpp when using DUAL_X_CARRIAGE. This patch enables and disables E1 as it should.
 2015-09-30 04:31:19 -05:00
Richard Wackerbarth 91b5156b3e Marlin 1.1.0 Release Candidate 2 - 29 September 2015 2015-09-29 20:28:41 -05:00
Richard Wackerbarth 03f0edb57e Fix high LCD status screen update frequency (PR#2655) 2015-09-28 11:07:33 -05:00
KiteLab 0ad25c6665 Hint for changed behaviour of SDSUPPORT 2015-09-28 11:07:33 -05:00
Richard Wackerbarth e01f5e1ef7 Cleanup 2015-09-17 10:44:23 -05:00
Mike Cochrane 5e36b64635 SDEXTRASLOW for some SD card readers (PR#176) 
Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL
 2015-09-14 07:58:08 -05:00
Scott Lahteine 5d65a36dee Give lcd_sd_status an UNKNOWN state (PR#180) 2015-09-14 06:32:27 -05:00
fmalpartida 0f149ea0c6 LCD home button causes repeated homing (PR#175) 
Fix: increased debounce delay.
 2015-09-14 06:31:49 -05:00
Scott Lahteine b825567e0f Drop www. from marlinfirmware.org (PR#175) 2015-09-14 06:28:53 -05:00
Scott Lahteine db27e67580 Apply PID_ADD_EXTRUSION_RATE to extras 2015-09-12 07:53:20 -05:00
Scott Lahteine bc50db9cf6 Implement PID_ADD_EXTRUSION_RATE 2015-09-12 07:53:20 -05:00
Scott Lahteine cffb2d457e Cleanup file formatting 2015-09-12 07:48:27 -05:00
Scott Lahteine 7ac7ddbf20 Show nozzles, heaters, and extruders numbered 1-4 2015-09-12 07:40:18 -05:00
Scott Lahteine 5bc480fee8 Fix Move E menu items 2015-09-12 07:33:49 -05:00
Scott Lahteine fc882c34a3 Init lcd_sd_status as false to force lcd_update test 
Replaces #145 which is way out of date
 2015-09-12 07:32:20 -05:00
Scott Lahteine e27dd5c22d Conditionalize functions that rely on SDSUPPORT 2015-09-12 07:30:09 -05:00
Scott Lahteine fabf3ae4a0 Add final Z raise after Delta probe 2015-09-12 07:23:24 -05:00
Petr Zahradnik 8c768a76a2 Create language_cz.h 
Czech language translation.
 2015-09-12 07:18:05 -05:00
Petr Zahradnik 5b9010965d Update language.h 
Added comment for Czech language (associated with file language_cz.h).
 2015-09-11 04:43:54 +02:00
Scott Lahteine 89fb778684 Fix up probe pin define and test 2015-09-10 10:54:03 -05:00
Scott Lahteine 558665cd90 Constrain Tune > Nozzle/Flow menu items 2015-09-10 08:47:11 -05:00
Scott Lahteine 9f462f0cf5 Hack to address stuttering caused by ISR not finishing in time 
(PR #138)

When the ISR does not finish in time, the timer will
wrap in the computation of the next interrupt time.

This hack replaces the correct (past) time with a time not far in the future.
 2015-09-10 08:26:17 -05:00
Scott Lahteine 8b3d63c423 Unify Delta XYZ homing rates 
As noted in #130 allen key probe stow rate is based on homing rates,
but homing rates were left out of most delta configs. This unifies the
XYZ homing rates and applies the unified rates to allen key movements.
 2015-09-08 13:11:55 -05:00
Scott Lahteine 7c72b57313 Unify manual feedrate and Fix LCD MANUAL_FEEDRATE (PR#128) 
As noted by @o-lampe at https://github.com/MarlinFirmware/MarlinDev/issues/114#issuecomment-136757614 the `MANUAL_FEEDRATE` for Delta Z should be the same as XY.
 2015-09-08 13:11:55 -05:00
Scott Lahteine f690b82343 Remove extra MAX_FREQ_TIME define (PR#148) 2015-09-08 13:11:12 -05:00
Scott Lahteine a4c78ae786 Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z 2015-09-07 09:41:06 -05:00
Scott Lahteine a39fadf876 Update kossel-pro example config (again?) 2015-09-07 09:41:06 -05:00
Scott Lahteine 34e0a8d848 Move Y2 and Z2 pins defines to pins.h 2015-09-07 09:41:06 -05:00
Scott Lahteine 28599c51c7 Wrap Dual Y options in a conditional 2015-09-07 09:41:05 -05:00
Scott Lahteine 11a065c0ca Remove Z2 pins overrides from Configuration_adv.h 2015-09-07 09:41:05 -05:00
Scott Lahteine f7f6b5faae Fix lcd_move_e compile error (PR#143) 
Fix a compile error introduced in #98
 2015-09-07 09:36:05 -05:00
Scott Lahteine 2b30e8ac99 Conditionals for ULTIPANEL without SDSUPPORT 2015-09-06 02:04:49 -05:00
Scott Lahteine 7c7a4051fe Disable SDSUPPORT by default 
As noted in #133 you can’t disable `SDSUPPORT` with `MAKRPANEL`,
`PANEL_ONE`, `MINIPANEL`, or `ULTIPANEL`. This patch makes it possible
to disable `SDSUPPORT` on these controllers and then disables it by
default.

Users of these controllers will now need to enable `SDSUPPORT` in their
configurations as others currently do.
 2015-09-06 02:04:49 -05:00
Eric Kuzmenko b23d765991 Added Extrude From Multiple Extruders from LCD feature 2015-09-05 05:33:18 -05:00
Christian Lefrançois 8347a9d6e4 Fix HOMING_BUMP_DIVISOR for deltas configuration 
* Re-bump speed divisor should be the same for delta printer.
 2015-09-03 09:26:28 -05:00
Scott Lahteine 703df2cb6c Fix error message for probe region sanity check 2015-09-03 03:27:47 -05:00
Shane Francis 4c8330c15c Trim Adjustments for Delta Configurations 2015-09-03 01:05:33 -05:00
Scott Lahteine 962120d1d2 Fix spacing in some conditional blocks 2015-08-27 20:59:09 -05:00
Richard Wackerbarth 20b4772155 Create DEBUG_LEVELING_FEATURE 2015-08-27 20:52:08 -05:00
Scott Lahteine 194f98ff95 Debug messages for homing and leveling 2015-08-27 20:52:08 -05:00
Richard Wackerbarth 6292d9e815 Rename ENABLE_AUTO_BED_LEVELING 
With the introduction of the #if ENABLED(…)

reads better than
 2015-08-27 20:52:08 -05:00
Richard Marko 91fd66ffba add Lulzbot TAZ4 example configuration (PR#104) 2015-08-27 08:36:43 -05:00
Wurstnase 7a275773ee remove colon in utf_mapper.h (PR#106) 2015-08-27 07:15:23 -05:00
Chris Bruner 6b4b6fa315 update for newest version of U8glib_Arduino 2015-08-26 19:52:59 -05:00
Christian Lefrançois 9897a9147c Update ABL comments (PR#95) 
* Updates the auto bed leveling comments ONLY.
* Renames "Z probe" word usage in //comments and #errors properly.
 2015-08-26 05:51:38 -05:00
Christian Lefrançois a7822e3ff7 Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91) 
* Fix a couple of renames omission and macro expansion errors.
 2015-08-20 06:04:46 -05:00
Richard Wackerbarth ad90e851b3 Use a small unsigned integer type 2015-08-16 06:56:47 -05:00
Richard Wackerbarth 29b456ae07 Suppress some compiler warnings 2015-08-16 06:56:47 -05:00
Scott Lahteine 23d742bf06 Don't free the stack array plane_equation_coefficients (PR#83) 2015-08-16 06:53:24 -05:00
Scott Lahteine e3b1e08777 Patch G30 to use raise_z_for_servo (PR#73) 2015-08-15 21:47:04 -05:00
Scott Lahteine a1eb90d5c0 Save another 30 bytes in gcode_SET_Z_PROBE_OFFSET 2015-08-12 21:26:32 -05:00
Scott Lahteine 91122277f4 Reduce gcode_SET_Z_PROBE_OFFSET by 88 bytes 2015-08-12 21:26:25 -05:00
AnHardt 5707a2c3d5 indexindexIntoAB is only vald for !DELTA 2015-08-11 17:32:11 -05:00
AnHardt d8860f9ad9 Alway end at the same point 
Always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION]
Regardles the evennes of auto_bed_leveling_grid_points.
 2015-08-11 17:32:11 -05:00
AnHardt 4ca8f4a9a7 Always zigzag 
Use the shortest way between probing-points.
 2015-08-11 17:32:11 -05:00
AnHardt 3d23424121 Add array indexIntoAB[xx][yy] 
and use it.
 2015-08-11 17:32:11 -05:00
AnHardt e2d69f66b2 Make Z_PROBE a Z_MIN_PROBE (PR#65) 
Currently we use the probe exclusively as a device to find the build platform(bed).
For the currently supported setups this means, we use it as a additional min-endstop.
A triggered when not deployed probe disturbs the homing process for max-endstops.

Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE
Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP
Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Adjust comments accordingly
Remove Z_MAX  check for the probe in update_endstops().

Using an delta related idea of @clefranc from #61,
extended to the general change for all setups.

Tested with Prusa i3, max-z-endstop and permanently triggered z-probe.
Worked for @clefranc's delta.
 2015-08-11 14:41:36 -05:00
AnHardt 6a6e863a47 Resolve #2581 by adding a missed ';' (PR#67) 2015-08-10 12:51:59 -05:00
RicardoGA e09ff79635 Update pins_RAMPS_13.h (PR#64) 
Now all ramps configuration can enable Filament sensor not only EEB
 2015-08-10 05:53:01 -05:00
Fourmi e6aed7bb4e Update thermistortables for Hisens Thermistor (PR#2588) 2015-08-09 18:11:14 -05:00
Richard Wackerbarth 9d8cc24abf Continue from the line following the M999 (PR#60) 
If the printer is going to accept the M999,
then it should continue from that line number.
 2015-08-08 08:08:02 -05:00
wurstnase f3ab1dba54 Z babystepping for coreXY (PR#47) 
only X and Y were not implemented
 2015-08-04 20:10:09 -05:00
Richard Wackerbarth 35afea1c0e Restore test 
PR#2572 Changed this because of faulty Boolean Logic

NOT(A OR (NOT B) OR (NOT C)) !=

(NOT A) AND ((NOT B) OR C))


Besides, the compiler should be smart enough to
optimize this without help from the programmer
 2015-08-04 15:22:56 -05:00
Scott Lahteine 6af75f4b5d Squish down deprecated tests in sanity check 2015-08-03 16:04:48 -05:00
Scott Lahteine edeb58288e Use PIN_EXISTS in sanity check 2015-08-03 16:04:48 -05:00
Scott Lahteine c30b7693e0 Clean up RUMBA pins conditions 2015-08-03 16:04:48 -05:00
Scott Lahteine 46453905d6 Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
Richard Wackerbarth b227d8c128 Supply a VERSION in a short form for displays 
The long descriptor will still be available in M115
 2015-08-03 08:21:09 -05:00
Richard Wackerbarth cd7828a928 This will be the 1.1.0 Release rather than 1.0.3 2015-08-03 08:08:38 -05:00
Richard Wackerbarth 4e2f5618c1 Pick up Default_version when needed 2015-08-03 08:08:37 -05:00
Richard Wackerbarth 329acc852e Canonize Option flag USE_AUTOMATIC_VERSION 2015-08-03 08:08:37 -05:00
Richard Wackerbarth 5a11d32a85 Move deprecation test to SanityCheck.h 2015-08-03 08:08:37 -05:00
Richard Wackerbarth 7bb7a52940 Bring config up-to-date 2015-08-03 07:35:33 -05:00
AnHardt 244ea2014a Boot-screen for text-displays improvements 
Centred the logo for 16x4 and 20 x4.
Moved version to the bottom line
Code shrink to 704 bytes.
 2015-08-03 07:13:00 -05:00
AnHardt 80f2a20842 Enable bootscreen in all Configurations 2015-08-03 07:13:00 -05:00
AnHardt 2684d061ed Scroll too long strings on bootscreen 2015-08-03 07:13:00 -05:00
AnHardt 4f46df5dab Make bootscreen configurable for the graphic displays 
Saves about 473 byte of progmem and 28 bytes of RAM.
 2015-08-03 07:13:00 -05:00
AnHardt 09571b7753 Boot-screen for the character displays 
Uses about 488 byte of progmem and 32 byte of RAM.
For that configurable.
 2015-08-03 07:13:00 -05:00
Richard Wackerbarth 866efc14fe Add Danish translations 2015-08-03 07:06:17 -05:00
Scott Lahteine 267f3479d7 Adjust spacing in pins_RAMPS_13.h 2015-08-02 23:26:58 -05:00
Scott Lahteine 56702e7bb9 Define servo pins just like other pins 2015-08-02 23:26:58 -05:00
Richard Wackerbarth 4b9d5cd352 Use lowercase names for serial instances 2015-08-02 23:01:39 -05:00
Scott Lahteine 1e2deff4fd Rename BTENABLED to BLUETOOTH 
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
 2015-08-02 22:56:50 -05:00
Scott Lahteine 68055a5959 Include RIGIDBOT_PANEL in Conditionals 2015-08-02 22:26:41 -05:00
George Djabarov f8ed3a835d Added comment with the RigidBot Big bed size 2015-08-02 22:13:37 -05:00
George Djabarov 7deae6b6be Updated RigidBot example configuration 
- The default serial baud rate of 115200
- The regular RigitBot bed size 254mm/248mm/254mm
- Single stock extruder
- Stock termistors for extruder and hotbed
- Stock Min X/Y/Z stops. Max stops not connected
- Stock 32 teth tooleys (stock axis steps)
- No auto bed leveling
- No screen
 2015-08-02 22:13:37 -05:00
Scott Lahteine 5418faa1f9 Add sanity checks for old names 2015-08-02 22:09:08 -05:00
Scott Lahteine f03e063750 Rename BEEPER to BEEPER_PIN 
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
 2015-08-02 22:09:08 -05:00
Scott Lahteine 270c766de2 SDCARDDETECT -> SD_DETECT, added docs 
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
 2015-08-02 21:59:41 -05:00
Scott Lahteine 496fc28dc3 Tweaks to pins comments 2015-08-02 21:34:13 -05:00
Scott Lahteine 8d3b74cc6e Rename SDCARDDETECT to SDCARDDETECT_PIN 
- Rename the pin so it can be tested with `PIN_EXISTS`
- Fix some incorrect tests for `SDCARDDETECT`
 2015-08-02 21:34:13 -05:00
Scott Lahteine 0f5ada8cbd Group the fail case in one negation (PR#2572) 2015-08-01 18:55:50 -05:00
AnHardt 7ddf1cda1d Improve condition for SERVO_LEVELING (PR#2570) 2015-07-31 22:41:34 -05:00
Richard Wackerbarth f32048b8f5 In for a penny, in for a pound 2015-07-31 17:13:53 -05:00
Scott Lahteine e944f960de Add a sanity check for old name "BEEPER" 2015-07-31 17:13:53 -05:00
Scott Lahteine 8ebf0b92be Spacing adjustments in some pins files 2015-07-31 17:13:53 -05:00
Scott Lahteine 94a796c8cc Rename BEEPER to BEEPER_PIN 
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
 2015-07-31 17:13:53 -05:00
Richard Wackerbarth b217474eab Compiler Complaints about concatenated tokens (PR#2566) 2015-07-31 17:08:44 -05:00
Scott Lahteine 2460f82d8b Make proper distinction between BEEPER and HAS_BUZZER 2015-07-31 01:24:33 -05:00
Scott Lahteine 58cfcd4239 Overridable Options - Part 5 
Apply `ENABLED` / `DISABLED` macros to files needing only a small
number of changes.
 2015-07-31 01:24:20 -05:00
Scott Lahteine 5e834352a9 Overridable Options - Part 11 (PR#2563) 
Apply `ENABLED` / `DISABLED` macros to EEPROM-related files.
 2015-07-31 01:07:04 -05:00
Scott Lahteine bf6eb93c61 Overridable Options - Part 10 (PR#2562) 
Apply `ENABLED` / `DISABLED` macros to planner files.
 2015-07-31 01:06:29 -05:00
Scott Lahteine 51e89a269c Overridable Options - Part 9 (PR#2561) 
Apply `ENABLED` / `DISABLED` macros to temperature-related files.
 2015-07-31 01:05:55 -05:00
Scott Lahteine c35fb88094 Overridable Options - Part 8 (PR#2560) 
Apply `ENABLED` / `DISABLED` macros to stepper-related files.
 2015-07-31 01:05:22 -05:00
Scott Lahteine 0d8989fc14 Overridable Options - Part 7 (PR#2559) 
Apply `ENABLED` / `DISABLED` macros to LCD-related files.
 2015-07-31 01:04:37 -05:00
Scott Lahteine b4abb0ae7f Apply ENABLED / DISABLED to Marlin core files (PR#2558) 2015-07-31 01:03:58 -05:00
Scott Lahteine c0d7ea3e7e Overridable Options - Part 4 (PR#2556) 
Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.
 2015-07-31 00:44:53 -05:00
Scott Lahteine 4b40964064 Overridable Options - Part 3 (PR#2555) 
Apply `ENABLED` / `DISABLED` macros to language-related files.
 2015-07-31 00:19:13 -05:00
Scott Lahteine 32683b282b Include configurator copies of configs 2015-07-31 00:03:36 -05:00
Scott Lahteine 37d1879386 Apply overridables to Configuration files 2015-07-31 00:03:36 -05:00
Scott Lahteine 9d151bb61b servo_endstop_angles -> servo_endstop_angle 2015-07-30 23:35:57 -05:00
Scott Lahteine 9334479aeb Minor cleanup of Conditionals.h 2015-07-30 23:35:57 -05:00
Scott Lahteine 1f63293624 servo_endstops -> servo_endstop_id 2015-07-30 23:35:57 -05:00
Scott Lahteine edaaead7e0 Fix comment about SERVO_ENDSTOP_ANGLES 2015-07-30 23:35:57 -05:00
Scott Lahteine ed4a6371ad Add HAS_SERVO_ENDSTOPS to simplify conditonals 2015-07-30 23:35:57 -05:00
Scott Lahteine 70be61d416 Reset filament_size with a loop 2015-07-30 23:31:58 -05:00
Scott Lahteine ae9274be05 Fix minor compiler warnings in for loops 2015-07-30 23:31:58 -05:00
Scott Lahteine c7c8cfed6f Complete M200 output with M503 
- The contents of EEPROM include filament diameters even with
Volumetric disabled. This change makes `M503` display the full
volumetric settings so that playing back the output of `M503 S0` will
fully restore them.
 2015-07-30 23:31:58 -05:00
Scott Lahteine 4a58e447a1 Add array size to servo_endstop_angles (PR#2553) 2015-07-30 23:27:38 -05:00
Andrew Lenharth a0ae9e30df don't pass integer by reference, inefficient. (PR#2547) 2015-07-30 17:51:12 -05:00
AnHardt d03f037a92 Get rid of malloc() and free() (PR#2549) 
Just the minimal changes to qr_solve.cpp and .h to get rid of malloc() and free().

Saves about 656 bytes of progmem (library-code)
and 22 bytes for static variables.

Should use exactly the same amount of stack as it did before on the heap.
 2015-07-30 17:50:31 -05:00
Scott Lahteine 3b2b2313ff Combine if block related to SERVO_ENDSTOPS 2015-07-30 16:39:05 -05:00
Scott Lahteine 0af2a80e06 Make SERVO_ENDSTOP_ANGLES 2-dimensional 2015-07-30 16:38:56 -05:00
Richard Wackerbarth 525d0dc239 Configurator is out-of-date AGAIN (PR#2550) 2015-07-30 16:36:01 -05:00
Richard Marko dd22cbbfb8 makefile: add buzzer.cpp (PR#2479) 2015-07-30 07:56:44 -05:00
Scott Lahteine 9f48798ffd Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542) 2015-07-30 07:55:29 -05:00
Richard Wackerbarth ae00fad75b Rename as M100 2015-07-27 20:31:59 -05:00
Richard Wackerbarth a401d738df There is an echo in here 2015-07-27 20:31:59 -05:00
Richard Wackerbarth ed7d45e8f5 Memory watcher 2015-07-27 20:31:59 -05:00
AnHardt d17f7ebc8a Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535) 
instead of 1000.  Else we get errors with times over 32 seconds.
 2015-07-27 20:30:53 -05:00
Scott Lahteine bea6739774 Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527) 2015-07-27 20:24:33 -05:00
Scott Lahteine 81bba7ed88 More sanity checking for extruder requirements (PR#2531) 2015-07-27 10:14:43 -05:00
AnHardt 87a97f3724 Fix conditions for display strings 2015-07-26 20:41:21 -05:00
AnHardt aaccea0260 Shift some display only strings from language.h to lenguage_en.h 
and translate them to German.
 2015-07-26 20:41:15 -05:00
Scott Lahteine e4c01f1c7e Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507) 2015-07-26 20:40:27 -05:00
Scott Lahteine ab6f1fdf8b Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528) 
As suggested in #2521
- Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is
also required.
- Add a note that endstops must be enabled for the feature to have any
effect
 2015-07-26 20:36:37 -05:00
Richard Marko 1183c10a2e makefile: drop -q -q (much quiet) from avrdude flags 
Annoying when trying to figure out if uploading
actually does something.
 2015-07-26 20:31:31 -05:00
Richard Marko 0e064357f4 makefile: use /etc/avrdude/avrdude.conf on linux 
No need to look for arduino specific avrdude configuration
as distributions ship their own avrdude.conf file that
is compatible with arduino.
 2015-07-26 20:31:31 -05:00
Scott Lahteine bcb7d5a149 Improve sanitycheck for TEMP_SENSOR_1 2015-07-25 21:17:36 -05:00
Scott Lahteine 5b24f59401 Add sanity checks for temp sensors 2015-07-25 21:17:36 -05:00
AnHardt fd0e81b0c7 Distinguish between BUZZER and SPEAKER (PR#2513) 
A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC.
A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC.

There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer.
To make these board able to handle a speaker

* replace the PWM based tone()-function again with a on-delay-off-delay loop.

Hopefully the last time I touch the beeper code.
 2015-07-24 22:10:04 -05:00
Scott Lahteine e2957df05c Shorthand for do_blocking_move_to 2015-07-24 22:07:41 -05:00
Scott Lahteine 819c5b9b50 Adjust comment on Z adjustment 2015-07-24 22:07:41 -05:00
Scott Lahteine 5a7356b6fc Patch for G29 final Z position 
Include all the necessary pieces to get the final Z position after
probing the bed, and add commentary about other possible changes.
 2015-07-24 22:07:41 -05:00
AnHardt 088e09e052 Add forgotten Marlin_main.cpp 2015-07-24 22:04:49 -05:00
AnHardt 8b876241bd Some more servo code tweaks 
Just set up the pin. Don't move to a random position.

Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.

SERVO_LEVELING is the wrong condition to deactivate the servos.

Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
 2015-07-24 22:04:49 -05:00
Scott Lahteine b116c096bd Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512) 
Updates to `set_homing_bump_feedrate`:
- Move the string into Program Memory, reduce length by 31 bytes
- Use an auto to get the divisor, adjust it on error
- Set feedrate once, at the end
 2015-07-24 22:00:25 -05:00
Scott Lahteine f7e7862588 Better Sanguinololu & Graphical Controller (PR#2504) 
- Change suggested at
https://github.com/MarlinFirmware/Marlin/issues/2482#issuecomment-123553
266
 2015-07-23 23:47:07 -05:00
Scott Lahteine a1154d4a20 Enable Y and sanity-check CoreXZ (PR#2509) 2015-07-23 23:46:27 -05:00
Scott Lahteine 932f1c109e Move servos to the top in pins_MEGACONTROLLER.h 2015-07-23 22:51:41 -05:00
Scott Lahteine 90f8ddfc1e Apply MINIPANEL to other configs 2015-07-23 22:51:41 -05:00
AndySze 00dbf69b6d add MINIPANEL defines 2015-07-23 22:51:40 -05:00
AndySze 8ac5e56934 fixed some format problems and cleaned code 2015-07-23 22:51:40 -05:00
AndySze eef595aa64 add makerlab mega controller pin configs 2015-07-23 22:51:40 -05:00
AnHardt 4e14e152fa Add Travis tests for CORXY and COREXZ 2015-07-23 19:52:48 -05:00
AnHardt 27d7d2ccab Correct bracketing for COREXY-XZ 2015-07-23 19:52:21 -05:00
Scott Lahteine 469843427d Reduce code in gcode_M81 (PR#2497) 2015-07-23 08:14:00 -05:00
Scott Lahteine c66955aaf9 Mark unchanging arrays as const (PR#2494) 
The compiler may be able to optimize if it knows an array won’t be
changing.
 2015-07-22 21:37:37 -05:00
Scott Lahteine 278aa15301 Add COUNT macro and apply 2015-07-22 18:16:05 -05:00
Scott Lahteine d85861d296 Move macros, add ENABLED/DISABLED, add includes 2015-07-22 18:16:05 -05:00
Scott Lahteine 17960fd2b0 Neaten up pins_MEGATRONICS.h (PR#2493) 2015-07-22 17:23:22 -05:00
Scott Lahteine aac2b9aa9d Reduce code in gcode_M84 (PR#2492) 
`gcode_M84` only needs to call `finishAndDisableSteppers`, which calls
all the other functions.
 2015-07-22 17:22:01 -05:00
Scott Lahteine 4971fa73f9 Add a sanitycheck error for old servo settings (PR#2491) 
- Documentation solution for #2476
 2015-07-22 16:35:10 -05:00
Scott Lahteine 96ace72ddc Servos attach/detach based only on servo config 
Assuming #2470 fixed up the main issue.
 2015-07-22 16:34:26 -05:00
Richard Wackerbarth b80a6a8d31 Correct Kossel Pro Configuration_adv (PR#2473) 2015-07-22 16:32:08 -05:00
Scott Lahteine 000a6fce46 Extract update_endstops from stepper ISR (PR#2474) 2015-07-19 18:33:18 -05:00
Scott Lahteine e83eac312e Move plan_arc next to prepare_move 2015-07-19 16:18:46 -05:00
Scott Lahteine 5c5936508d G2/G3 Arcs for Delta 
- Update prepare_move_delta to take a target argument
- Add Delta support to plan_arc
 2015-07-19 16:18:46 -05:00
Scott Lahteine 9f53e2f0c9 Implement COREXZ in stepper.cpp and planner.cpp 2015-07-19 16:17:03 -05:00
Scott Lahteine fa00e1d97f Explode conditions common to corexy and cartesian 2015-07-19 16:17:03 -05:00
Scott Lahteine c7dd5527b4 Add a C_AXIS and Z_HEAD to support COREXZ 2015-07-19 16:17:03 -05:00
Scott Lahteine 129f986ccf Add COREXZ option to configurations 2015-07-19 16:17:03 -05:00
Scott Lahteine 69b0490b77 Show minimal preheat options in menus (PR#2471) 2015-07-19 16:14:59 -05:00
Scott Lahteine eacfe132aa Change the name of servos[] and servo_t 2015-07-19 11:35:48 -07:00
Scott Lahteine 3b23ccd366 Patch servos code for move 
- Have `Servo::attach` explicitly return -1 if it fails
- Check for -1 in `Servo::move` because `servoIndex` might be 0
- Make `attach` / `detach` calls conditional on `SERVO_LEVELING`
- Move `SERVO_LEVELING` define to `Conditionals.h`
 2015-07-19 11:24:23 -07:00
Richard Wackerbarth 54ddc1d417 Simplify DRY RUN (PR#2358) 
Elsewhere DRYRUN turns off the heating elements
and ignores constraints on them.

Here, whenever motion is entered into the planner,
if DRY RUN is set, we instantly act as if the E_AXIS
is in the desired final position.
 2015-07-19 10:15:53 -05:00
Scott Lahteine 944090c19c Optimize lsDive logic 2015-07-19 10:13:40 -05:00
Scott Lahteine 417706e578 Include space for the terminating nul in lsDive 2015-07-19 10:13:39 -05:00
Scott Lahteine f3c1a6b19c Reduce lsDive stack usage to the minimum 2015-07-19 10:13:39 -05:00
Patrick Bogen fba4e6241b Specify print format for reporting invalid tmp_extruder (PR#2465) 2015-07-18 16:40:01 -05:00
AnHardt d15d869267 Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464) 
to make clear - it's not a question but an order.
 2015-07-18 10:27:21 -05:00
Scott Lahteine f209b755a5 Move the Z probe as far as needed to trigger the switch (PR#2461) 2015-07-16 20:02:44 -05:00
Scott Lahteine 0f1df62389 Fixup comments in code_seen 2015-07-16 16:40:52 -05:00
Scott Lahteine 2945eb6650 Call code_seen only once per parameter 2015-07-16 16:40:52 -05:00
Scott Lahteine b742af2e2a Move Y_STOP_PIN for Printrboard with SD (PR#2420) 2015-07-16 16:39:55 -05:00
Scott Lahteine baa9199973 Define extern delta only for delta 2015-07-16 16:36:30 -05:00
Scott Lahteine 77e80ef367 Require extruders for thermal code 2015-07-16 16:36:30 -05:00
Scott Lahteine 3bde4f4855 Require temp sensor for bed thermal protection 2015-07-16 16:36:30 -05:00
Scott Lahteine 82a3ed2f9a Cleanup and dev notes in Marlin.h 2015-07-16 16:36:30 -05:00
Scott Lahteine db23b9b184 Minor tweak to M204 code (PR#2457) 2015-07-16 16:35:13 -05:00
Scott Lahteine 81d42406b7 Move braces in homeaxis to prevent a hanging else (PR#2451) 2015-07-16 10:25:54 -05:00
Scott Lahteine 552a327df8 Fix lsDive filename stack overrun (PR#2449) 2015-07-16 10:23:56 -05:00
AnHardt a6628f12cc Eliminate the further use of the pin-parameter 2015-07-15 20:50:58 -05:00
AnHardt 8504992e9f Remove the additional pin variable in Servo.cpp 
as sugested by @c-born
inhttps://github.com/MarlinFirmware/Marlin/issues/1885#issuecomment-92618240
 2015-07-15 20:50:58 -05:00
AnHardt ed6598adf5 Corrected Bed Height vs. Bed Topology for verbosity > 3 
and cleaned out some tabs.

Everything else is a rebased PR#2017 as proposed by @CptanPanic
 2015-07-15 19:51:40 -05:00
brian 62302ceb9e Add calculation of difference between auto-correct bed level plane, and measured topo map. 2015-07-15 19:51:40 -05:00
Scott Lahteine de25a48dec Remove PID examples from preconfigured configs 2015-07-15 19:13:53 -05:00
Scott Lahteine 7456710a1f Update configs formatting 2015-07-15 19:13:47 -05:00
Scott Lahteine 391386dd94 Update configs for new servo deactivation 2015-07-15 19:13:40 -05:00
AnHardt 5243d8b523 Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default 2015-07-15 17:39:43 -05:00
AnHardt 49609f6c14 Activate the new servo.move() function 
by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp
and removing the old configuration in the ABL part of Configuration.h
 2015-07-15 17:39:43 -05:00
AnHardt 40b6edcad7 Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h 
DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY.
But it will work on all servo moves, not only the probe servo moves.
 2015-07-15 17:39:43 -05:00
AnHardt 2ddb2a2be9 Add Servo::move() to servo.cpp 
move(pin, angel) - Sequence of attach(pin), write(angel),
                   if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches.

As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour,
the usual sequence to handle a servo movement is:
attach(pin)
write(angel)
delay(until the servo finished the move)
detache()

Here a function to handle the complete sequence.
 2015-07-15 17:39:43 -05:00
mkile 8a01e5fb7a Update Russian translation (PR#2443) 
Slightly updated translation.
 2015-07-15 10:35:36 -05:00
Richard Wackerbarth e83575537a Compiler defines USBCON for USB devices (PR#2433) 2015-07-15 10:32:11 -05:00
ayberkozgur 7268d46508 Always calculate extruder temperature PID d term (PR#2432) 2015-07-13 13:22:26 -05:00
Scott Lahteine 87a872e103 Use st_get_position_mm where possible (PR#2411) 2015-07-12 22:15:54 -05:00
Scott Lahteine 2e0da8abdc Allow N to take a negative argument (PR@2402) 2015-07-12 22:14:25 -05:00
Scott Lahteine 447dbd6fa5 Add STEPPER_RESET_PIN support 2015-07-11 16:04:11 -05:00
Scott Lahteine a0351bdb73 Remove STEPPER_RESET_FIX option 2015-07-11 16:04:11 -05:00
Scott Lahteine 6b1b8cb2b3 Also nullify spaces before the checksum asterisk (PR#2409) 2015-07-10 09:03:07 -05:00
Scott Lahteine 8e61314323 Use RIGIDBOT_PANEL for consistency with online docs 2015-07-09 11:36:46 -05:00
Scott Lahteine 4b204da3c1 Cleanup of pins_RAMPS_13.h 2015-07-09 11:36:46 -05:00
Scott Lahteine 536f86e896 RigidBot CONTROLLERFAN_PIN in Configuration_adv.h 2015-07-09 11:36:46 -05:00
Scott Lahteine f068e46661 RigidBoard include for pins.h 2015-07-09 11:36:46 -05:00
Scott Lahteine 9ebcae496d RIGIDBOARD / RIGIDPANEL 2015-07-09 11:36:46 -05:00
Scott Lahteine c3c605c658 Move note about LiquidTWI2 to Configuration.h (PR#2406) 2015-07-09 05:33:17 -05:00
Scott Lahteine 4e9d658141 Prevent a hanging SERIAL_ECHO_START in M111 2015-07-07 06:59:10 -05:00
Scott Lahteine bc0fdbe88e Use SERIAL_EOL in SERIAL_PROTOCOLLN macros 2015-07-07 06:59:10 -05:00
Scott Lahteine d78ebbc0e9 Remove unused MSG_OK_B and MSG_OK_T 2015-07-07 06:59:10 -05:00
Scott Lahteine 6b494c1535 Use disable_all_heaters in M111 2015-07-07 06:59:10 -05:00
Scott Lahteine 15190d40df Add extra EOL after M111 2015-07-07 06:59:10 -05:00
AnHardt 0e1cf78f5c Remove code for testing if probing range is too small (PR#2390) 
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
 2015-07-07 06:58:01 -05:00
AnHardt d421f5250d Correct the sign of zprobe_zoffset for G29 (PR#@391) 
Sign flipped with #2167.
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
 2015-07-07 06:55:33 -05:00
Scott Lahteine 52fcc743ab Replace "target" with "destination" in M600 (PR#2374) 
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
 2015-07-04 05:55:25 -05:00
Scott Lahteine a5033c3652 Enable LCD_PIN_RESET if it exists (PR#2375) 2015-07-04 05:53:22 -05:00
AnHardt 23c8c5348f Z-height fix V2b (PR#2351) 
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
 2015-07-02 20:30:40 -05:00
Todd Swindoll a111fbbd0a z-probe offset fix (PR#2361) 
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
 2015-07-02 20:28:07 -05:00
Scott Lahteine 42465ee444 Cleanup of comments & spacing 2015-06-28 08:20:28 -05:00
Scott Lahteine 9682ed455e Fix comment on M83, add comment to prepare_move 2015-06-28 08:20:19 -05:00
Scott Lahteine bb44fe17cf Fix typo in buzzer.h endif (PR#2337) 2015-06-27 06:10:19 -05:00
AnHardt 36746143a1 Correct output of M48 (PR#2336) 
n_samples is an uint8_t .
Got printouts like:
50 of 2  ...
 2015-06-27 06:08:40 -05:00
Scott Lahteine f6ca5a8da8 Allow "M110 N123" without a checksum 2015-06-26 18:13:54 -05:00
Scott Lahteine aaad65ff5d Include a comment documenting M110 2015-06-26 18:13:54 -05:00
Scott Lahteine 862c72b030 Put the mandatory test of gcode_N first 2015-06-26 18:13:54 -05:00
Scott Lahteine 30976f9773 Allow M110 to handle a second N argument 2015-06-26 18:13:53 -05:00
Scott Lahteine d135b15bb8 Init all endstop bits to 0 (PR#2332) 2015-06-26 07:10:22 -05:00
Scott Lahteine 5ccb1c9e7d Use millis for M600 audio feedback interval 2015-06-25 20:45:03 -05:00
Scott Lahteine fb16a83b8a Cleanup M600 documentation comments 2015-06-25 20:45:03 -05:00
Scott Lahteine 97ec224d72 Replace target with destination in M600 2015-06-25 20:45:03 -05:00
Scott Lahteine 4ce9ddbb74 Check the temperature before filament change 2015-06-25 20:45:03 -05:00
Jaime van Kessel b8b5762e55 Update Ultimaker URL 2015-06-25 09:12:44 -05:00
Jaime van Kessel d5bfbf5a59 Added correct dutch translation for calibrate. 2015-06-25 09:12:44 -05:00
Scott Lahteine 149c474e55 Updated Russian language (PR#2325) 
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
 2015-06-22 23:07:19 -04:00
AnHardt 722829b058 Move buzzing code to buzzr.h & buzzer.cpp (PR#2307) 
at least the lcd independent part from Marlin_main.cpp.
 2015-06-22 22:31:48 -04:00
AnHardt c461975140 Rename and repair MELZI_1284 (PR#2301) 
to MELZI_MAKR3D.

Fix for #2288
As the normal MELZI also can have a 1284.
 2015-06-22 22:30:07 -04:00
schlotzz 1e9cf905c7 Enable ZigZag AutoBedLeveling on Deltas (PR#2273) 
ZigZag has been disabled by fault due to do_topography_map
 2015-06-15 20:26:25 -05:00
Scott Lahteine ec93383ec8 Add SanityCheck for bed probe position settings (PR#2282) 2015-06-15 20:22:44 -05:00
Scott Lahteine dc40a5f6e0 Patch up more outdated config lines 2015-06-15 20:20:32 -05:00
Scott Lahteine 98c9111a7d Update delta configs with latest settings 2015-06-15 20:20:32 -05:00
Scott Lahteine e6baf8afd9 Fix up allen key settings in delta configs 2015-06-15 20:20:31 -05:00
Scott Lahteine 3b293fc5d1 Move Delta settings lower in delta files 2015-06-15 20:20:31 -05:00
Scott Lahteine df21857583 Move extruder offset settings next to extruders setting 2015-06-15 20:20:31 -05:00
Scott Lahteine 2dd1859247 Cleanup spaces and comments in configs and conditionals 2015-06-15 20:20:31 -05:00
Scott Lahteine a274769f4f Clean up spacing and comments 
Also clean up some trailing spaces in a few other sources
 2015-06-15 20:20:31 -05:00
Scott Lahteine d3bce05d54 Fix up spacing for filament sensor values 2015-06-15 20:20:31 -05:00
Scott Lahteine b4b10a57fe Fix configurator section directives and values lists 2015-06-15 20:20:31 -05:00
Scott Lahteine bba14dcbe6 Move Z Safe Homing point to the middle of the movement range 2015-06-15 20:20:31 -05:00
Scott Lahteine 318318b02f Add pins_RAMPS_13_EFB.h to reduce redundancy 2015-06-15 20:17:09 -05:00
Scott Lahteine 346c8b339b Remove a test from pins_RAMPS_13.h 
- Add 3 new lines to `pins.h` to remove 2 redundant tests in
`pins_RAMPS_13.h`
 2015-06-15 20:15:38 -05:00
AnHardt b93cddfcc9 Add lost MKS_BASE to pins.h (PR#2297) 2015-06-15 10:23:46 -05:00
AnHardt 6ab7b560af Rework buzzing (PR#2296) 
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.

Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.

All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.

To do: Check the conditions for the BEEPER-pin in all pin-files.
 2015-06-15 06:13:26 -05:00
Scott Lahteine 29122db2fa Fix ULTRA_LCD spelling in HAS_LCD_BUZZ 2015-06-15 06:12:34 -05:00
Scott Lahteine 1d94d098bf Formatting tweaks as part of fixing issue 1497 2015-06-14 19:57:27 -05:00
Scott Lahteine e602c28ad9 Set auto fan pins to OUTPUT during init 
Fixes the problem of these pins being left in INPUT state, as described
in #1497
 2015-06-14 19:57:27 -05:00
Scott Lahteine 90f858aa85 Use translated strings for axis movement (PR#2280) 
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
 2015-06-14 08:16:00 -05:00
Scott Lahteine e2a4a83586 Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281) 2015-06-12 22:39:35 -05:00
Scott Lahteine 6b1b3adaf0 Consistent punctuation in SanityCheck errors (PR#2283) 2015-06-12 09:31:02 -05:00
MagoKimbra eb81982fcd Fix error next command in autotune (PR#2274) 
Now send only temperature for T or B, but not send OK.
Host interprets the line to show the right temperature, but not in
response to M105 then stop and send commands until it ends the autotune.
 2015-06-12 07:10:38 -05:00
AnHardt 55b23c896a Optimise out_of_range_error() (PR#2265) 
by avoiding the strncopy()
 2015-06-12 02:20:40 -05:00
filipmu b0860adab6 Fix volumetric multiplier display for filament sensor (PR#2264) 
The volumetric multiplier display needs to be multiplied by 100 in order to make it an integer for display purposes.
 2015-06-12 02:19:27 -05:00
AnHardt 45642b7fe8 Respect DISABLE_AXIS settings (PR#2216) 
when DEFAULT_STEPPER_DEACTIVE_TIME is over
instead of simply turn off all.
 2015-06-11 11:35:05 -05:00
wurstnase c85a486445 make the dual z-endstop optional (PR#2277) 
it's disabled by default
 2015-06-10 15:45:59 -05:00
Scott Lahteine 962b107341 Prevent current_command_args from bypassing nul (PR#2270) 2015-06-09 16:07:10 -05:00
Richard Wackerbarth 06ae832276 Deprecate Support for Arduino IDE < 1.0.5 
Note that newer versions of the IDE can still
be made to support compilation for the older boards.
 2015-06-08 17:15:28 -05:00
Scott Lahteine ff6081be3a Parse N[0-9]+[ ]* differently (PR #2263) 
More general solution to skip N[0-9]+[ ]* in the parser as in #2218
 2015-06-08 17:06:49 -05:00
Scott Lahteine aad121864e Include "Z" in M851 report 2015-06-08 05:09:27 -05:00
Scott Lahteine 96a3fba8ac Reverse the sign of zprobe_zoffset 
- When editing on the LCD, minus now means below the nozzle
- Stores the opposite sign in EEPROM, so bumped to “V20”
 2015-06-08 05:09:27 -05:00
fmalpartida f92907183c Updated SAV MkI pin header. 2015-06-08 05:07:11 -05:00
Richard Wackerbarth 58941e543e ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed 
#defining something just to define something else doesn’t
make sense

If you want SDCARDDETECTINVERTED, just define it yourself.

If the previous code was intended to define, undefined and then again define the term, that code is improper.
 2015-06-06 21:44:59 -05:00
CONSULitAS 788eb6e647 planner.cpp: remove tab 
planner.cpp: single evil and hidden tab removed ♻️ 😏
 2015-06-06 20:13:56 -05:00
CONSULitAS 3a5963c0e7 Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue … 
* all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping
issue
* for K8200: uncommented with tested (and working) values
 2015-06-06 20:13:56 -05:00
CONSULitAS e55e65d1e4 planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue … 
@CONSULitAS

planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue (V2.1 with
macro and linear scaling)

@thinkyhead thanks for idea on linear scaling
 2015-06-06 20:13:56 -05:00
paclema 8d295547be * Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button. 2015-06-06 19:45:45 -05:00
atfield90 6d0e91328d Renamed Board_megatronics_1 to Board_minitronics 2015-06-06 18:59:04 -05:00
atfield90 c4a2e5ac23 Renamed Pins_megatronics_1 to Pins_minitronics 2015-06-06 18:59:04 -05:00
atfield90 2076906aaa Renamed Pins_megatronics_1 to Pins_minitronics 2015-06-06 18:59:04 -05:00
tonokip 10733a2bb0 added minirambo pin definitions. V2 2015-06-06 18:37:58 -05:00
Richard Wackerbarth 303d47228e Define Probe Path in new format 2015-06-06 17:48:27 -05:00
Richard Wackerbarth ad09d6a60f 3 Step Allen Key Probe 2015-06-06 17:48:27 -05:00
Richard Wackerbarth 8359cdf01d Check compatibility for Teensy-based processor 
The instruction say to set a #define in fastio.h
However, that value is not included before this test.
 2015-06-06 17:24:34 -05:00
Ed Boston 08968c29bb Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples 2015-06-06 16:40:32 -05:00
Ed Boston fed18bcc20 Removed SDSLOW for ELB_FULL_GRAPHIC_CONTROLLER 
Hardware changes has removed the need for this option.
 2015-06-06 16:40:32 -05:00
Ed Boston b94a0e1501 Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED 
The new define allows the sd card detect to be inverted or not from
Configuration.h
 2015-06-06 16:40:31 -05:00
Ed Boston bc205c76a3 SDCARDDETECTINVERTED problems 
Fixed an error where SDCARDDETECTINVERTED was being defined/undefined
improperly
 2015-06-06 16:40:31 -05:00
AnHardt e400fce271 Merge pull request #2221 from MagoKimbra/Dryrun 
Insert Debug DRYRUN Repetier Host compatible
 2015-06-03 12:30:48 +02:00
AnHardt 163a9ff58e Merge pull request #2230 from AnHardt/psm 
Fix thermal protection state machine target temp. V2
 2015-06-03 09:46:53 +02:00
AnHardt c3fe6e61ae Merge pull request #2229 from AnHardt/position-out-of-range 
Fix out_of_range_error()
 2015-06-03 09:46:22 +02:00
MagoKimbra 4db8d2def4 Moved MSG_DEBUG in language.h 2015-06-03 08:18:27 +02:00
AnHardt b7e9ba7591 Back to 1.0.3 dev - for now 2015-06-03 00:47:11 +02:00
AnHardt d1f4471000 Merge pull request #2146 from Wackerbarth/Versioning 
Versioning
 2015-06-02 18:31:21 +02:00
AnHardt b1404a0743 fix thermal protection state machine target temp. V2 
If the target temperature is changed then it would always stay in the reset state.
Thanks to @tonokip.

Replaces #2119
 2015-06-02 12:26:21 +02:00
AnHardt 17b0ec84ed Fix out_of_range_error() 
For sprintf_P() the first parameter has to be a `char*` not `const char*`.
 2015-06-02 11:50:32 +02:00
AnHardt 35af5ef23e Merge pull request #2225 from Wurstnase/naming 
consistency name for multiplier
 2015-06-02 10:18:22 +02:00
wurstnase e7e964432b consistency name for multiplier 
replace extruder_multiply with extruder_multiplier
like feedrate_multiplier or volumetric_multiplier
 2015-06-01 22:33:22 +02:00
AnHardt d4c6fc5d0a Merge pull request #2223 from AnHardt/dualz-semicolon 
Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.
 2015-06-01 20:15:55 +02:00
AnHardt 0d9d21d15f Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again. 2015-06-01 19:51:43 +02:00
MagoKimbra 76306f9073 Insert Debug DRYRUN Repetier Host compatible 2015-06-01 18:34:45 +02:00
MagoKimbra 881146bc22 Fix problem Width Cura 2015-06-01 17:25:32 +02:00
fmalpartida 11e3f3375d Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing 
Updated LCD wiki location.
 2015-05-31 21:20:26 +02:00
Alexey Shvetsov a8670b66a7 Update ru translation 
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2015-05-31 20:09:10 +03:00
fmalpartida 93da52d011 Added support for OLED SSD1306 I2C based LCDs. 2015-05-31 18:53:29 +02:00
Wurstnase 9c09967803 Merge pull request #2149 from Wurstnase/enstop_bits 
faster compare
 2015-05-31 16:02:55 +03:00
wurstnase 0f3f7d6835 clean up double endstops 2015-05-31 14:06:13 +02:00
AnHardt 9d2a980bcf Merge pull request #2170 from thinkyhead/beep_M600_elsewise 
Slight size reduction by adding idle()
 2015-05-30 12:42:32 +02:00
AnHardt 2728dc0606 Merge pull request #2194 from thinkyhead/reduce_strings 
Redo "invalid extruder" to save 304 bytes
 2015-05-30 11:05:08 +02:00