zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
8150 commits 1 branch 0 tags 156 MiB
Commit graph

801 commits

Author SHA1 Message Date
Scott Lahteine 824f3c1c0d Fix up configuration comments 2017-04-08 18:59:56 -05:00
Scott Lahteine 995ed90248 Clean up Filament Width Sensor comments 2017-04-08 18:59:56 -05:00
Scott Lahteine f8408036f2 Merge pull request #6264 from thinkyhead/rc_five_extruders 
Support up to 5 extruders in Marlin
 2017-04-07 12:48:56 -05:00
Bob-the-Kuhn f7fc49c3a3 Finish name change 
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
 2017-04-07 11:05:24 -05:00
Scott Lahteine 2a84122edd Configuration changes to support 5 extruders 2017-04-07 10:46:35 -05:00
Bob-the-Kuhn 549055f20c Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency 
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
 2017-04-06 16:35:50 -05:00
Bob-the-Kuhn 3b9ff2cb12 Merge pull request #5676 from Bob-the-Kuhn/configuration.h 
Configuration.h - reword Z PROBE section
 2017-04-06 16:18:34 -05:00
Bob-the-Kuhn 6643d553f6 # This is a combination of 2 commits. 
# This is the 1st commit message:

MCP4728 consistency & fix ultralcd.cpp

The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.

PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.

This change moves the default settings to Configuration_adv.h.

Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp

===========================================================

reword stepper curent section for clarity

===========================================================

change name & improve comments

===========================================================

changed name from A4JP to SCOOVO_X9H per PR #6139

# This is the commit message #2:

fix typo
 2017-04-06 16:16:27 -05:00
Bob-the-Kuhn a5abc61fb9 Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins 
M43 - add Toggle utility and Z servo utility (replaces PR #5864)
 2017-04-06 16:10:50 -05:00
Bob-the-Kuhn 3b8926bd09 improved wording, consolidation of info, BLTouch warning 
==============================================

clarified BLTouch calculation & changed comment delimitters/flags

I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */

Made the BLTouch calculation simpler and clarified the units of measure
for the result.

============================================

add changes to example configurations

============================================

add TinyBoy2 to this PR & add BLTouch Delay
 2017-04-06 16:06:01 -05:00
Scott Lahteine d13991ae18 Use same config name for all mesh dimensions 2017-04-06 16:05:59 -05:00
Bob-the-Kuhn f9686a108c add Z servo test and toggle pins to M43 2017-04-06 15:59:38 -05:00
Scott Lahteine 62cbaa302e Z_DUAL_ENDSTOP - make offset a configuration item 
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.

z_endstop_adj is initialized in two places so both had to be modified.
 2017-04-06 15:57:10 -05:00
Scott Lahteine eb1e6aa29b Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
Scott Lahteine c56eec29f0 Configurable delay for BLTouch servo emulation 2017-04-02 11:14:53 -05:00
Scott Lahteine deaad78df9 Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap 
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
 2017-04-02 10:32:04 -05:00
Scott Lahteine b47fd31c37 Revert some changes to UBL 2017-04-01 21:53:45 -05:00
Scott Lahteine 63abb65146 Update description of PINS_DEBUGGING 2017-03-31 18:57:48 -05:00
Scott Lahteine 9e22184936 Add a "manual" option for ABL 2017-03-31 11:50:18 -05:00
Scott Lahteine 81136c1e82 Merge pull request #6177 from thinkyhead/rc_tinyboy 
Support for TinyBoy 2 3D printer (and its OLED display)
 2017-03-31 04:31:47 -05:00
Stefan Brüns 6ba6c92a81 Add example configuration for TinyBoy L10/L16 
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-31 04:05:35 -05:00
Stefan Brüns 0fe57ad4f5 Add Support TinyBoy2 OLED/Encoder panel 
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-31 04:05:34 -05:00
Scott Lahteine edbc024d76 Disable UBL_G26_MESH_EDITING by default 2017-03-31 02:20:20 -05:00
Stefan Brüns 5699e2b881 Add SOFT_PWM_DITHER to other configurations 2017-03-24 05:02:24 -05:00
Scott Lahteine 783338a0b8 Add UBL_MESH_EDIT_ENABLED to configs 2017-03-24 00:44:55 -05:00
Scott Lahteine e244399766 Additional cleanup of UBL code 2017-03-22 20:51:10 -05:00
Bob-the-Kuhn 0934563b97 G38 optional double touch 
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.

==============================================

Bugfix

The current G38 only stopped a move if it involved the Z axis.

Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.

Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.

==============================================

Change G38 back to using Z_MIN_PROBE

There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.

G38 started out as using the Z_MIN_PROBE pin.  I don't remember why we
changed it to the Z_MIN endstop.
 2017-03-22 15:08:49 -05:00
Scott Lahteine 2573f4dd05 Merge pull request #6052 from thinkyhead/rc_lift_on_pause 
Add PARK_HEAD_ON_PAUSE feature / M125
 2017-03-20 03:36:31 -05:00
Scott Lahteine 26473cab6d Add PARK_HEAD_ON_PAUSE feature 2017-03-19 05:06:55 -05:00
Scott Lahteine 8eb29f91e6 Patch filament change options and beep code 2017-03-19 01:14:39 -05:00
Scott Lahteine f98fb6b38e Update Felix config for UBL 2017-03-19 00:28:48 -05:00
Scott Lahteine 143ab8f329 Remove Roxy's personal configurations 2017-03-18 12:35:02 -05:00
Scott Lahteine 2512871a36 Patch configs UBL followup 2017-03-18 12:32:03 -05:00
Scott Lahteine 27b5666e15 Move Allen Key probe definition to the top 2017-03-18 12:27:37 -05:00
Scott Lahteine cf94688925 Univeral Bed Leveling - configuration 2017-03-18 11:35:19 -05:00
Scott Lahteine 03aa424ccb Merge pull request #6053 from thinkyhead/rc_clean 
Remove extraneous whitespace
 2017-03-18 03:26:45 -05:00
Scott Lahteine af644871bf Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics 
Remove delta optimization concepts… for now
 2017-03-18 03:26:24 -05:00
Scott Lahteine 77491dd924 Remove extraneous whitespace 2017-03-18 03:17:39 -05:00
Scott Lahteine b865b21d32 Can't use Z fade height with DELTA 2017-03-17 08:34:47 -05:00
Scott Lahteine 0e410c9dfd Software endstop options as simple switches 2017-03-17 06:05:17 -05:00
Scott Lahteine 3e927ff204 Replace MBL Z hacking 2017-03-17 06:05:17 -05:00
Scott Lahteine 5a456c832a Apply TMC2130 to example configurations 2017-03-07 04:22:06 -06:00
Scott Lahteine 6aa81255a9 Patch and clean up "flsun" kossel. Followup to #5911. 2017-03-06 03:15:00 -06:00
Marek Pikuła 7698c5617a Added circle nozzle cleaning parameters to example configurations 2017-03-06 03:04:58 -06:00
Scott Lahteine 3b75518ef6 Merge pull request #5911 from aphex3k/flsun_kossel_mini 
Configuration.h and Configuration_adv.h for the kossel mini by flsun
 2017-03-06 02:26:01 -06:00
Scott Lahteine 05abe853f9 New option: NO_WORKSPACE_OFFSETS 2017-03-05 04:43:15 -06:00
Scott Lahteine 5065636023 Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio 
LIN_ADVANCE: Fixed E/D ratio option
 2017-03-03 03:24:41 -06:00
Scott Lahteine fb4aead2b1 Clean up and finish #5887 2017-03-02 20:16:29 -06:00
Sebastianv650 de6c40ed8f Add option to fix E/D ratio 
Work around for slicers producing buggy gcode.
 2017-03-02 01:00:37 -06:00
Michael Henke 47729918fc
enable ENSURE_SMOOTH_MOVES 2017-02-27 20:42:49 -08:00
Michael Henke 330b981912 created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun 2017-02-25 21:31:37 -08:00
Colin Gilgenbach 48b7e0f8d8 Nozzle Wipe Vertical Zig-Zag 
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
 2017-02-25 21:52:43 -06:00
Scott Lahteine e282b72151 Remove non-applicable comment on MANUAL_Z_HOME_POS 2017-02-18 05:14:43 -06:00
Scott Lahteine 561904345f Tweak config ordering for M600 2017-02-18 00:01:31 -06:00
Scott Lahteine 931914e679 Apply M600 updates to all configs 2017-02-15 05:29:34 -06:00
Scott Lahteine 47f9883b0f Dynamic allocation for SDCARD_SORT_ALPHA 2017-02-14 21:37:25 -06:00
Scott Lahteine a561bd5e3a New feature: SDCARD_SORT_ALPHA 2017-02-14 21:37:24 -06:00
Robert Kirk 0d147ead66 Allow enabling volumetric filament on config load 2017-01-14 04:37:49 -08:00
esenapaj d38e335272 From "microseconds" to "milliseconds" 
delay() is milliseconds
 2017-01-02 01:19:33 +09:00
Scott Lahteine 4061fca1ad Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT 2016-12-23 19:55:12 -08:00
Scott Lahteine 5ab7b91615 Comment on filament runout sensor config 2016-12-23 19:50:27 -08:00
Scott Lahteine 8c6c048551 drop biv2.5 delta configurations 2016-12-23 18:56:07 -08:00
Sebastianv650 84c685f8b5 First draft of Unified Stepper / E Advance ISR 2016-12-21 01:34:39 -08:00
Scott Lahteine bec30c89e7 Merge pull request #5522 from esenapaj/Add-description-for-dual-x 
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
 2016-12-20 01:31:53 -08:00
Scott Lahteine 18ba31e9b5 Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example 2016-12-19 22:57:14 -08:00
esenapaj 6854f44bf2 Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE 2016-12-19 02:21:10 +09:00
Scott Lahteine 78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh 
Save Bed Leveling to EEPROM
 2016-12-15 20:23:01 -08:00
Scott Lahteine 1b2fb2bdc7 ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_* 2016-12-15 19:08:41 -08:00
esenapaj 069c6b38dd Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
Scott Lahteine 06af3b62ba Move HOLLOW_FRAME options to config_adv 2016-12-14 04:31:27 -08:00
AnHardt d0e24e0876 Adaptive screen updates for all kinds of displays 
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
 2016-12-13 18:44:34 +01:00
Scott Lahteine 0772c8e55f Merge pull request #5487 from thinkyhead/rc_easier_move_axis 
Rearrange Move Menu, Fix up Delta Calibration
 2016-12-13 07:07:05 -08:00
Scott Lahteine 641e0936d4 Patch up Delta Calibration Menu 2016-12-13 02:42:28 -08:00
João Brázio 3f75edb1d6 Updated bq Hephestos 2 example configuration 2016-12-13 09:26:07 +00:00
Scott Lahteine da6a094424 Sanity-check inverting and pullups for Z probe and Z endstop 
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
 2016-12-08 00:12:19 -08:00
Scott Lahteine aa241c63b3 Include M205 note in configurations 2016-12-07 14:45:44 -06:00
akaJes d7b948610a Experimental bilinear subdivision option 2016-12-05 20:11:24 -06:00
Scott Lahteine f882355994 Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements 
Account for LCD improvements in ENSURE_SMOOTH_MOVES
 2016-12-05 11:23:58 -06:00
Scott Lahteine 20e834461d Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal 
Show decimal for small numbers in ftostr4sign
 2016-12-05 11:22:45 -06:00
Scott Lahteine d5bf1684fe Implement as optional feature LCD_DECIMAL_SMALL_XY 
And reduce the function size to simplify
 2016-12-05 09:26:05 -06:00
Scott Lahteine 3391c785c6 Support for distinct E factors 2016-12-05 07:26:18 -06:00
Scott Lahteine f60b4f8659 Allow case light pin to be active low 2016-12-01 23:32:34 -06:00
Scott Lahteine 47b4b21308 Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072 
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
 2016-12-01 13:37:02 -06:00
Scott Lahteine 415294801f Merge pull request #5330 from thinkyhead/rc_rgb_led 
Support for an RGB LED using 3 pins
 2016-11-30 14:14:00 -06:00
esenapaj 0909cf3d46 Adjust spacing 2016-11-30 19:39:39 +09:00
esenapaj 8e9e9c17b0 Follow-up the PR #5323 (Adding ukrainian language support) 
・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head
 2016-11-30 19:39:39 +09:00
esenapaj d92ce8849b Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc 
・Make descriptions the same as others
 2016-11-30 19:39:38 +09:00
Scott Lahteine 65c50e062e Support for an RGB LED using 3 pins 2016-11-30 00:02:31 -06:00
jes f674246397 extend Configurations files 2016-11-29 15:04:36 +02:00
Sebastianv650 f62f4006af Account for LCD improvements in ENSURE_SMOOTH_MOVES 
.. and give the hint to try lower values if possible.
 2016-11-28 17:44:19 +01:00
Scott Lahteine 092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted 
Support for COREYX, COREZX, COREZY
 2016-11-28 02:26:41 -06:00
Scott Lahteine c7935bb0d2 Merge pull request #5299 from thinkyhead/rc_bed_correction_fade 
Add a fade factor for mesh leveling
 2016-11-28 02:07:51 -06:00
Scott Lahteine 5460a529da Add option DOGM_SPI_DELAY_US 2016-11-26 06:53:52 -06:00
Scott Lahteine f6f77d34a1 Add a fade factor for mesh leveling 2016-11-26 03:41:26 -06:00
esenapaj ef97645002 Follow-up the PR #5255 (Case light menu (3rd attempt)) 2016-11-24 19:42:05 +09:00
Scott Lahteine 14b74181f5 Merge pull request #5179 from thinkyhead/rc_TMC2130 
TMC2130 "Silent StepStick" support
 2016-11-21 14:10:52 -06:00
Scott Lahteine 4e4f37b6c2 Code formatting for TMC and L6470 config options 2016-11-21 00:52:18 -06:00
Scott Lahteine bf5f5f44cc Make TMC2130 init code auto-configure 
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
 2016-11-21 00:52:17 -06:00
Moritz d67c1d825f Add TMC2130 support 2016-11-21 00:17:45 -06:00
Scott Lahteine 11effeee2c Add an option for delta to home to the top 2016-11-20 23:12:07 -06:00
Scott Lahteine 072541f286 Update ENSURE_SMOOTH_MOVES in all configs 2016-11-19 01:28:47 -06:00
Scott Lahteine 0be6167f14 Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18 
K8200: Example configuration back in sync
 2016-11-18 22:49:18 -06:00
Scott Lahteine eb714ee873 Move dummy thermistor opts, fix redundant sensor comment 2016-11-18 22:24:48 -06:00
Scott Lahteine 7a99c6ce4f Reformat temp sensor listing 2016-11-18 22:24:47 -06:00
Scott Lahteine eb120e518c Followup to new endstop interrupts feature 
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
 2016-11-18 21:53:45 -06:00
Scott Lahteine 832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts 
Introduce endstop interrupts
 2016-11-18 20:50:24 -06:00
CONSULitAS cbae44df64 K8200: Example configuration back in sync 
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
 2016-11-18 22:55:02 +01:00
Scott Lahteine 2330619da0 Merge pull request #5191 from petrzjunior/const 
Replace const bool with #define for consistency
 2016-11-17 03:37:32 -06:00
Petr Zahradník junior d7ce5d271b
Replace const bool with #define for consistency 2016-11-16 18:55:21 +01:00
AnHardt f3eee02596 Introduce endstop interrupts 
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.

The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.

This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
 2016-11-15 12:07:41 +01:00
Scott Lahteine 60cc9342a4 Merge pull request #5188 from thinkyhead/rc_extended_host_support 
Extended host support: M155 Auto temp report, M115 capabilities
 2016-11-12 15:38:06 -06:00
Scott Lahteine 3c9a838651 Extended capabilities report in M115 2016-11-09 02:32:58 -06:00
Scott Lahteine 68b866b5dd Add M155 - Auto-report temperature with interval 2016-11-09 02:32:58 -06:00
Scott Lahteine 75bfde9945 M155=>M260, M156=>M261 2016-11-08 17:54:54 -06:00
esenapaj 2ae72b0491 Follow up the PR #5167 (Add Turkish Language) again, etc 
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
 2016-11-09 06:31:21 +09:00
Scott Lahteine e3c8318504 Add reversed CORE options 2016-11-05 23:47:46 -05:00
Rigid3D 2327764980 Add Turkish Language 2016-11-05 21:06:16 -05:00
Scott Lahteine 2495ab7af2 Make dual_x_carriage_mode an enumeration 2016-11-02 21:38:49 -05:00
Stanley ab3f966f5f Case light G-code M355 
implemented G-Code M355 into Marlin
 2016-11-01 06:30:14 -05:00
Scott Lahteine b6aa894893 Rename auto fan pins and add auto fan flags 2016-10-26 17:51:26 -05:00
Scott Lahteine 627f9d5285 Merge pull request #5056 from thinkyhead/rc_lin_adv_opt 
LIN_ADVANCE optimizations
 2016-10-22 07:06:39 -05:00
Scott Lahteine 0908329d96 Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical 
Fix manual leveling coordinates
 2016-10-22 06:31:02 -05:00
Scott Lahteine 14e60f0d3b Correct typo in configs 
As pointed out by #5044
 2016-10-22 05:56:32 -05:00
Scott Lahteine b9109b2875 Improve LIN_ADVANCE commentary (all configs) 2016-10-22 05:03:09 -05:00
Scott Lahteine 4f6bfabaad Patch BAUDRATE line in configs 2016-10-22 00:48:52 -05:00
Scott Lahteine b6221df3f3 Merge pull request #4983 from MarlinFirmware/revert-4933-rc_drop_pid_func_range 
Revert "Removal of PID functional range"
 2016-10-10 13:29:54 -05:00
Scott Lahteine 1e551c0688 Revert "Squashed - Removal of PID functional range" 2016-10-09 16:27:45 -05:00
Scott Lahteine 48761f2021 Patch delta endstop adjustment config 2016-10-09 13:32:45 -05:00
Scott Lahteine 00261cbfcb Merge pull request #4933 from thinkyhead/rc_drop_pid_func_range 
Squashed - Removal of PID functional range
 2016-10-07 15:07:55 -05:00
Scott Lahteine a0df34fd4c Add PINS_DEBUGGING advanced config option 2016-10-07 14:20:13 -05:00
Rerouter 5f5d87cad3 Update Configuration.h 2016-10-02 07:01:40 -05:00
Scott Lahteine d19cfcfc1d max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK 2016-10-02 06:34:56 -05:00
Scott Lahteine 473f4a17a8 Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp 
Pid unconstrained itemp
 2016-10-01 06:58:07 -05:00
Scott Lahteine 0d538f3db6 Add to all configurations 2016-10-01 05:00:53 -05:00
Scott Lahteine fffc9fefa8 Apply changes to all configs 2016-09-29 02:17:33 -05:00
Scott Lahteine 2d2c9bdf92 Add PROBE_Y_FIRST option for probe order 2016-09-29 02:00:27 -05:00
esenapaj 92c03a44a9 Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. 
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents

・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h

・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section

・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h

Adjust spacing

About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA

Adjust spacing
 2016-09-28 14:14:04 -05:00
Scott Lahteine ea0dbee3c9 Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
Scott Lahteine 8935bed594 MIDDLE_DEAD_ZONE => MIDDLE_DEAD_ZONE_R 2016-09-24 05:18:36 -05:00
Scott Lahteine dbe41245f1 Merge pull request #4821 from thinkyhead/rc_revert_to_raises 
Z Raise/Clearance rather than Height
 2016-09-22 15:30:07 -05:00
Scott Lahteine 890bade2fa Additions, mods to SCARA config 2016-09-20 18:31:36 -05:00
Scott Lahteine 01f1028510 Try on "CLEARANCE" for size 2016-09-20 18:29:49 -05:00
Scott Lahteine 0e7d638a7a Revert to Probe Raise rather than Probe Height 2016-09-20 18:29:49 -05:00
Scott Lahteine e05af606a8 Clean up probe config options 2016-09-19 00:26:16 -05:00
Scott Lahteine c4dcfa254e Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH 2016-09-18 22:00:32 -05:00
Scott Lahteine e5505e3b33 Allow non-square leveling grid 2016-09-18 13:11:20 -05:00
Scott Lahteine a1812b55f6 Space out array values 2016-09-16 14:41:05 -05:00
Scott Lahteine d4599fd8ed Comment patches to Configuration.h 2016-09-16 14:41:05 -05:00
Scott Lahteine 723e983073 Default EXTRUDE_MAXLENGTH to 200mm 2016-09-16 14:41:04 -05:00
Scott Lahteine 9b0931ef74 Apply fixed EXTRUDER_RUNOUT_PREVENT 2016-09-13 03:33:04 -05:00