Scott Lahteine
|
8fd8772a6f
|
Adjust axis homed / trusted methods (#20323)
|
2020-11-29 19:06:40 -06:00 |
|
Jason Smith
|
df0a0c9490
|
Leveling Fade Height default setting (#20316)
|
2020-11-29 15:00:08 -06:00 |
|
Štěpán Dalecký
|
5cae4e9f55
|
[WIP] Fix Probe::offset_xy (#20290)
Co-authored-by: Jason Smith <jason.inet@gmail.com>
|
2020-11-26 13:21:48 -08:00 |
|
wmariz
|
58ac815822
|
Level Corners with Probe option (#20241)
|
2020-11-26 07:58:19 -06:00 |
|
|
Scott Lahteine
|
7ce675e604
|
No auto debug for EEPROM_CHITCHAT
|
2020-11-26 03:56:21 -06:00 |
|
|
Jason Smith
|
3a396a25dc
|
Retire HAL for STM32F4 / F7 (#20153)
|
2020-11-26 00:37:18 -06:00 |
|
|
Scott Lahteine
|
296a2ad7e4
|
Consistent Probe XY offset type
|
2020-11-24 17:38:26 -06:00 |
|
|
Jason Smith
|
a4e1132048
|
Fix Z4 in ENABLE/DISABLE_AXIS_Z (#20256)
This was accidentally broken in PR #20218
|
2020-11-23 03:07:43 -08:00 |
|
|
Jason Smith
|
58eaad703a
|
Fix dummy thermistors for Bed, Chamber, Probe (#20247)
|
2020-11-22 18:47:52 -06:00 |
|
Orel
|
8db72d027e
|
Skip unnecessary (costly) SW Stepper Enable (#20218)
Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
|
2020-11-21 16:27:06 -06:00 |
|
Simone Primarosa
|
615bf2a6f1
|
Fix bad SET_FAST_PWM_FREQ calls (#20227)
|
2020-11-20 19:53:04 -06:00 |
|
Till
|
fcc29fc189
|
Add Thermistor 20-21 notes (#19246)
|
2020-11-19 14:07:47 -06:00 |
|
JoAnn Manges
|
cb2ec628df
|
Use RTD for MAX31865 reading (#20188)
|
2020-11-18 23:12:03 -06:00 |
|
Giuliano Zaro
|
41529b6598
|
SMUFF (MMU2 clone) support (#19912)
|
2020-11-18 01:27:21 -06:00 |
|
FanDjango
|
110e0d782f
|
Guards for large BLOCK_BUFFER_SIZE (>=128) (#20130)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-11-16 14:56:05 -06:00 |
|
Victor Oliveira
|
ea371618da
|
Add Touch Calibration screen (#20049)
|
2020-11-15 16:39:58 -06:00 |
|
phcay
|
a97a1ae218
|
Fix extraneous Linear Advance DIR change (#20131)
|
2020-11-13 20:06:37 -06:00 |
|
|
Scott Lahteine
|
1d43e81be0
|
Fix compile warnings, serial alias
|
2020-11-13 18:28:15 -06:00 |
|
LinFor
|
f4e9f3654e
|
Fix MAX6675 SPI init, conflicts (#20086)
|
2020-11-11 16:27:45 -06:00 |
|
|
JoAnn Manges
|
40d442fde2
|
Fix MAX31865 on SPI (PT100/1000) support (#20074)
|
2020-11-11 15:52:35 -06:00 |
|
Costas Basdekis
|
0465e0ae3a
|
Distinct runout states (#19965)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-11-11 00:39:23 -06:00 |
|
|
Scott Lahteine
|
59eca253e1
|
Simplified temp sensor conditionals
|
2020-11-09 01:17:37 -06:00 |
|
qwewer0
|
c753d2b7f4
|
Use extra G35 BLTouch HS Mode clearance in Tramming Wizard (#20057)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-11-08 18:31:14 -06:00 |
|
|
Jason Smith
|
5013fdaf79
|
Fix tool-change servo index for E2 and up (#20060)
|
2020-11-08 02:15:30 -06:00 |
|
|
Scott Lahteine
|
06bf3ccfb7
|
Add alternative TERN macros
|
2020-11-07 22:19:25 -06:00 |
|
|
Scott Lahteine
|
dcb0f5dc3b
|
Temperature 'autostart' => 'auto_job'
|
2020-11-07 21:21:19 -06:00 |
|
Albert van Osch
|
7beebcd315
|
Zonestar Z8 XM2 support (#19991)
|
2020-11-07 16:59:19 -06:00 |
|
|
LinFor
|
2da25d67e1
|
Fix Endstop Interrupts with SPI endstops, sanity checks (#20051)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-11-07 03:37:45 -06:00 |
|
|
Orel
|
a272c019f9
|
Rename, adjust Dagoma F5 (#19947)
|
2020-10-29 20:02:29 -05:00 |
|
|
Scott Lahteine
|
54ec6a0ce2
|
Tweak code formatting
|
2020-10-29 01:14:15 -05:00 |
|
|
Jason Smith
|
bdb3f1ae2f
|
Fix LCD menus + DAC (#19907)
|
2020-10-27 21:40:12 -05:00 |
|
|
Orel
|
e3f1f7cd85
|
Fix DAC-related bugs (#19921)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-10-27 21:37:10 -05:00 |
|
Lucas Seiki Oshiro
|
c0b4f4eb47
|
"Sound: ON/OFF" menu item (#19901)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-10-27 20:41:12 -05:00 |
|
Marcio Teixeira
|
a74e82fbae
|
Fix NO_WORKSPACE_OFFSETS compile
|
2020-10-27 15:05:30 -05:00 |
|
|
Scott Lahteine
|
0ffee29a11
|
Case light brightness cleanup (#19856)
Co-authored-by: Chris <chris@chrisnovoa.com>
|
2020-10-22 22:31:48 -05:00 |
|
|
Scott Lahteine
|
c75e98dc84
|
Shorten a method name
|
2020-10-22 20:54:11 -05:00 |
|
|
qwewer0
|
c7f7f2403d
|
Fix Chopper Timing extra axis defaults (#19850)
|
2020-10-22 20:46:48 -05:00 |
|
ManuelMcLure
|
4fccb92e07
|
Configure TMC interpolation per driver (#19828)
|
2020-10-22 06:27:33 -05:00 |
|
bilsef
|
9baa944460
|
Teensy 4.1 Ethernet support (#19801)
|
2020-10-20 14:35:29 -05:00 |
|
|
Scott Lahteine
|
92767f5513
|
Misc. cleanup, serial strings
|
2020-10-19 20:39:36 -05:00 |
|
|
Scott Lahteine
|
21ce39aa9b
|
Use PGM serial strings
|
2020-10-19 04:25:48 -05:00 |
|
InsanityAutomation
|
6375829448
|
Apply home offsets to probing, Z Safe Homing (#19423)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-10-18 15:53:12 -05:00 |
|
Jago Strong-Wright
|
c2802d35bb
|
Distinct Chopper Timing settings (#19781)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
|
2020-10-17 22:35:19 -05:00 |
|
Sten Uusvali
|
6fed11896b
|
Fix M503 output for M907 motor current (#19777)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
|
2020-10-17 16:11:22 -05:00 |
|
|
Scott Lahteine
|
eaf6777a66
|
Rename ultralcd => marlinui
|
2020-10-16 19:55:18 -05:00 |
|
nb-rapidia
|
418b3e5ee2
|
Fix IDEX layer shift and DIR states (#19756)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-10-16 16:59:55 -05:00 |
|
|
Victor Oliveira
|
0b80841c38
|
Fix Color UI external_control, wait_for_release (#19771)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-10-16 16:19:48 -05:00 |
|
|
Victor Oliveira
|
e370834c35
|
Handle M410 in the main task (#19752)
|
2020-10-16 16:11:00 -05:00 |
|
|
Jason Smith
|
9a23fb5863
|
Fix SET_SOFT_ENDSTOP_LOOSE w/out soft endstops (#19734)
|
2020-10-14 13:50:03 -05:00 |
|
Scott Lahteine
|
733eb127e9
|
Simple bool in soft_endstops_t
|
2020-10-13 14:55:14 -05:00 |
|
Earle F. Philhower, III
|
193c0a52d9
|
Add loose soft endstop state, apply to UBL fine-tune (#19681)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-10-12 16:48:04 -05:00 |
|
|
Jason Smith
|
a866a758cc
|
Allow MAX31865 resistance values configuration (#19695)
|
2020-10-12 00:40:39 -05:00 |
|
|
Jason Smith
|
edda32e6b4
|
Fix motion compile w/out probe-oriented settings (#19684)
|
2020-10-11 19:42:50 -05:00 |
|
|
Jason Smith
|
c762b7c91b
|
Fix various errors, warnings in example config builds (#19686)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-10-11 19:06:57 -05:00 |
|
|
Scott Lahteine
|
492ba2a111
|
Digipots refactor / cleanup (#19690)
|
2020-10-11 14:58:35 -05:00 |
|
|
Victor Oliveira
|
8e03a4cb93
|
Keep HAL tasks running during PID Autotune (#19671)
|
2020-10-09 23:35:41 -05:00 |
|
|
Scott Lahteine
|
2c6ec0c999
|
Chamber vent/fan followup
|
2020-10-06 19:42:11 -05:00 |
|
ladismrkolj
|
2c99c1e06f
|
Add Chamber servo vent, auto fan (#19519)
|
2020-10-06 18:36:01 -05:00 |
|
ellensp
|
d88e694d06
|
Fix Z_AFTER_HOMING without probe (#19607)
|
2020-10-04 16:47:06 -05:00 |
|
|
qwewer0
|
4424645e04
|
Multi-line comments cleanup (#19535)
|
2020-09-28 14:53:50 -05:00 |
|
|
Scott Lahteine
|
c2c6a679ea
|
Rename LCD conditionals (#19533)
|
2020-09-28 01:13:27 -05:00 |
|
Emperor
|
00c09e95ac
|
Thermistor: Kis3d Silicone heater + precision cast plate (#19528)
|
2020-09-27 21:38:30 -05:00 |
|
Siana Gearz
|
7415e4e66d
|
Fix Allen Key Probe pin test (#19520)
|
2020-09-27 21:25:35 -05:00 |
|
|
Scott Lahteine
|
ecc8013812
|
Whitespace cleanup
|
2020-09-23 17:43:32 -05:00 |
|
|
ellensp
|
e3d4e328f9
|
Preserve brightness in EEPROM validate (#19485)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-09-23 15:44:15 -05:00 |
|
|
Jason Smith
|
5d0429ee2a
|
Catch a TMC address conflict early (#19458)
|
2020-09-22 20:36:31 -05:00 |
|
|
Victor Oliveira
|
79dc8a2297
|
Define <u8,u8,u8>::softSPI (#19419)
|
2020-09-22 15:44:17 -05:00 |
|
makerbase
|
d8ed749045
|
Add MKS Robin E3P, improve LVGL UI (#19442)
|
2020-09-20 20:55:02 -05:00 |
|
|
Scott Lahteine
|
76d8d1742c
|
Add multi-extruder condition
|
2020-09-20 20:51:21 -05:00 |
|
|
Marcio T
|
9fd06fa767
|
Fix case light brightness save/load (#19436)
|
2020-09-19 09:23:56 -05:00 |
|
cosmoderp
|
073b7f1e3a
|
E3 V2 DWIN: Z-Offset, cleanup, versatility (#19384)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-09-17 05:35:04 -05:00 |
|
|
ellensp
|
979876e958
|
Improve temperature runaway, idle timeout (#19339)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-09-13 23:58:39 -05:00 |
|
|
Scott Lahteine
|
49ca16c3fb
|
heater_ind_t => heater_id_t
|
2020-09-13 18:22:28 -05:00 |
|
|
ManuelMcLure
|
c04d5624da
|
Read from backup TMC StealthChop state (#19364)
|
2020-09-12 22:59:20 -05:00 |
|
Neskik
|
1917ed8741
|
M872 wait for probe temperature (#19344)
|
2020-09-11 22:51:19 -05:00 |
|
|
bilsef
|
049fbc92a9
|
Support for Teensy 4 (#19311)
|
2020-09-09 18:57:20 -05:00 |
|
|
Giuliano Zaro
|
828a582f4d
|
Make M600 heat up the nozzle. Reset runout on fail. (#19298)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
|
2020-09-07 21:29:45 -05:00 |
|
|
Scott Lahteine
|
a445746a8b
|
Clean up LCD conditionals, DWIN
|
2020-09-06 23:21:42 -05:00 |
|
Victor Sokolov
|
e97e6865c3
|
MarkForged kinematics (#19235)
|
2020-09-03 20:12:53 -05:00 |
|
|
Scott Lahteine
|
e0b413cf19
|
Add set_all_homed
|
2020-08-27 16:38:26 -05:00 |
|
swissnorp
|
a12ac5e175
|
Mark axes not-homed with HOME_AFTER_DEACTIVATE (#18907)
|
2020-08-27 16:05:53 -05:00 |
|
|
Scott Lahteine
|
462d3eeab1
|
set_axis_not_trusted => set_axis_never_homed
|
2020-08-27 14:49:00 -05:00 |
|
thordarsen
|
195d20cef2
|
Fix SINGLENOZZLE fan speed bug (#19152)
|
2020-08-26 05:23:56 -05:00 |
|
|
Scott Lahteine
|
4955aa5b78
|
Prusa => Průša
|
2020-08-26 02:15:50 -05:00 |
|
Colin Godsey
|
131ddeaeba
|
Direct Stepping update (#19135)
|
2020-08-26 01:32:56 -05:00 |
|
|
Giuliano Zaro
|
f67ad6fd70
|
Fix auto-power in PID autotune (#19119)
|
2020-08-24 09:54:25 -05:00 |
|
|
Scott Lahteine
|
7807b613d5
|
Update some comments
|
2020-08-21 02:59:23 -05:00 |
|
|
Giuliano Zaro
|
3426c7fc94
|
Configurable number of M106 fans (#18883)
|
2020-08-19 20:11:20 -05:00 |
|
Steven Haigh
|
a62ae2aa2d
|
Default Filament Runout Sensor enabled state (#19013)
|
2020-08-19 18:58:18 -05:00 |
|
|
Giuliano Zaro
|
d3c5161476
|
Fix __ARM__ / __arm__ typo (#19063)
|
2020-08-19 02:59:37 -05:00 |
|
|
Giuliano Zaro
|
f205bff2cc
|
Fix PSU on for PID autotune (#19066)
|
2020-08-19 02:49:46 -05:00 |
|
|
Scott Lahteine
|
56b35fc103
|
Do runout.reset after EEPROM read
|
2020-08-14 00:16:22 -05:00 |
|
|
swissnorp
|
3ddb720722
|
Fix 'sync_plan_position' call (#19016)
|
2020-08-13 22:37:57 -05:00 |
|
|
Giuliano Zaro
|
ce3df42e22
|
Fix DISABLE_[XYZE] code (#18970)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-08-09 20:48:57 -05:00 |
|
cbaugher
|
837dc4727d
|
Tool-change Z move followup (#18963)
|
2020-08-09 15:46:47 -05:00 |
|
sherwin-dc
|
852e5ae042
|
Password via G-code and MarlinUI (#18399)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
|
2020-08-08 20:00:42 -05:00 |
|
|
Scott Lahteine
|
97cb0a8c3e
|
General cleanup
|
2020-08-08 00:17:09 -05:00 |
|
|
Scott Lahteine
|
18adfe87bc
|
configuration_store => settings
|
2020-08-07 20:52:23 -05:00 |
|
|
cbaugher
|
7b2f7a94fa
|
Fix Z height after tool change (#18951)
|
2020-08-07 18:06:25 -05:00 |
|
|
Scott Lahteine
|
99ba866d8d
|
Optimize G-code / feature dependencies (#18919)
|
2020-08-06 08:14:00 -05:00 |
|