Bernhard Kubicek
b7fc14bc65
repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright.
2012-05-30 14:14:36 +03:00
ErikZalm
9e1021efbe
Fixed SL bug.
2012-05-28 22:32:53 +03:00
Erik van der Zalm
e31bef31ad
Limit PID autotune PWM to PID_MAX
2012-05-16 19:32:23 +02:00
ErikZalm
b2a9ccdb97
Merge pull request #159 from MaikStohn/Marlin_v1
...
Marlin v1 - BUG FIXES / CORRECTIONS
2012-05-16 12:32:35 -07:00
Erik van der Zalm
d459fb41b7
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-05-16 19:22:08 +02:00
ErikZalm
804e0d6117
Merge pull request #164 from guanix/Marlin_v1
...
Melzi support
2012-05-16 12:21:48 -07:00
Erik van der Zalm
ba96059203
add additional dropsegments test
2012-05-16 19:21:44 +02:00
zittix
fbd91ab0b5
Fixes #153 for bad call to abs()
2012-05-16 18:17:34 +02:00
MaikStohn
b51c06e2b3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2012-05-11 16:57:08 +02:00
MaikStohn
159ae90874
bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only)
2012-05-11 15:23:10 +02:00
MaikStohn
e48f5aa6a7
fixed typo
2012-05-11 15:22:06 +02:00
MaikStohn
1efe9ab497
changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu
2012-05-11 15:19:09 +02:00
Guan Yang
602c8ee02b
Melzi support
2012-05-09 18:37:07 -04:00
Bernhard Kubicek
451f9cc6d1
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
2012-05-09 08:05:13 +03:00
MaikStohn
b657a18449
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings"
...
This reverts commit 3682d9bd5b
2012-05-04 12:24:07 +02:00
MaikStohn
d188ae4c9d
added missing declaration of buttons_init()
...
This is required when moving the buttons_init() function to the
lcd_init() function
2012-05-03 15:48:44 +02:00
MaikStohn
3682d9bd5b
magic PROGMEM defines to avoid hundreds of wrong GCC warnings
2012-05-03 15:43:23 +02:00
MaikStohn
032df0b2c6
Moved LCD initialization out of constructor
...
Since the class "MainMenu" was used within a static variable the
initialization of the object (constructor call) was done before Arduino
library startup. It always caused a crash when using AVRStudio with
JTAG debugger (caused from calling the LCD initialization / the lot of
I/O work / the stack used during this calls). By moving the LCD_INIT
out of the constructor and using an explicit call inside of Arduino
setup() implementation immediately fixed all problems and the JTAG
debugger runs fine.
2012-05-03 14:28:17 +02:00
MaikStohn
bd1ad7c76a
explicit includes to make it compile with AVRStudio/Eclipse
2012-05-03 14:22:43 +02:00
MaikStohn
060b38de5c
delete obsolete and wrong code
...
"i" runs from 0 to 4 but "add_homeing" array size is 3 only. On the
other hand the calculated value gets overwritten by either one of the
if choice.
2012-05-03 14:15:46 +02:00
MaikStohn
789ba02d43
fixed typo in comment
2012-05-03 14:13:53 +02:00
Erik van der Zalm
1874cb71a6
Added option to increase the FAN PWM frequency.
2012-05-02 19:26:14 +02:00
Erik van der Zalm
6a5a34e0ff
Small cleanup
2012-04-30 13:37:49 +02:00
Erik van der Zalm
e3821bd86f
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-04-30 13:36:27 +02:00
Erik van der Zalm
02af69911e
Added temperature window to M109. This is needed for systems with no overshoot PID.
2012-04-30 13:36:19 +02:00
ErikZalm
e203b8c754
Merge pull request #154 from daid/Marlin_v1
...
Added 2nd extruder temperature LCD readout and setting.
2012-04-28 13:19:55 -07:00
ErikZalm
362ddc4efc
Merge pull request #155 from Atntias/patch-1
...
adding M120 and 121 for turning on and off the endstops only for homing
2012-04-28 13:19:19 -07:00
sefi
c27081aa4a
Fix to allow M120/M121
2012-04-28 17:35:51 +03:00
sefi
e11e072eca
adding M120 and 121 for turning on and off the endstops only for homing function
2012-04-28 17:31:22 +03:00
Daid
8e68c6cf89
Show proper temperature for extruder 2
2012-04-27 15:00:01 +02:00
Daid
8503b78876
Added support for 2nd extruder temperature to UltraLCD
2012-04-27 14:51:32 +02:00
Logan Bowers
3eacb4c16d
Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater
2012-04-25 19:22:38 -07:00
Bernhard
e4d2138dbd
reinitialize the lcd, if the SD card is inserted or removed. It seems that LCDs can confused by electrical discharges from time to time.
...
Since a removal or insert of the sd card takes a long time in firmware, just reinitializing the lcd does not hurt.
actually, it solves a problem with the UltiControlle
2012-04-22 21:12:17 +02:00
Bernhard
464b755918
added support for the UltiController
2012-04-22 20:55:56 +02:00
Bernhard
44fd8d46d2
fixed quickhome
2012-04-22 20:44:27 +02:00
Bernhard
33bb044d7c
fixed catsting to (int)e in serial error messages.
...
see https://github.com/ErikZalm/Marlin/issues/148
2012-04-22 20:04:39 +02:00
ErikZalm
c2557abc03
Merge pull request #138 from triffid/fix-makefile
...
make should rebuild if configuration or Makefile is changed
2012-04-15 10:21:46 -07:00
Erik van der Zalm
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
...
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
2012-04-15 19:17:33 +02:00
Erik van der Zalm
8aee9d51b6
Disabled disable_heater in PID_autotune.
2012-04-12 21:12:31 +02:00
Daid
414408b2d0
Fix for wrong systax in #ifdef.
2012-04-12 14:01:30 +02:00
Michael Moon
77d503fa13
Fix Makefile
2012-04-11 11:39:35 +10:00
Erik van der Zalm
cf7c8c458f
Fixed MAX6675
2012-04-10 21:57:57 +02:00
grrf
03b0850e63
This breaks temperature readout for pronterface!
2012-04-09 23:37:34 +03:00
tgiphil
ad8bc71d3e
- Fixed a typo
2012-04-07 20:01:31 -07:00
Erik van der Zalm
46feae79c6
Fixed typo in arc
2012-04-02 17:19:20 +02:00
Erik van der Zalm
4ca2f336f0
Changed default MINIMUM_PLANNER_SPEED -> 0.05
...
Fixed small bug in arcs
M105 prints now actual_temp/target_temp
2012-04-01 16:23:40 +02:00
Erik van der Zalm
ae0bf8068b
Fixed arc offset.
2012-03-27 19:03:33 +02:00
Erik van der Zalm
0c1b863755
Ignore ":" in comments.
2012-03-25 14:41:26 +02:00
Erik van der Zalm
63aec3c56e
Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.
...
Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp
2012-03-25 14:36:51 +02:00
ErikZalm
8b785f75a6
Merge pull request #123 from buserror-uk/for-upstream
...
For upstream
2012-03-23 11:54:58 -07:00
