zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
2734 commits 1 branch 0 tags 156 MiB
Commit graph

2200 commits

Author SHA1 Message Date
Scott Lahteine 85b67e5223 Merge pull request #1738 from thinkyhead/fixup_homing 
Fix G29 E and M48 n
 2015-03-29 20:08:19 -07:00
Scott Lahteine ce44bee28b Small code reduction 2015-03-29 19:45:14 -07:00
Scott Lahteine 0213f7f016 Cleanup case for M666 2015-03-29 19:39:43 -07:00
Scott Lahteine 803425e12c Fix G29 E and M48 n 
- Users prefer `G29 E` to work like `M48 E` so fixed that
- `M48 n` replaced with `M48 P` (or `p`). `n` legacy support
- Shorten some strings to save precious bytes
- Smaller code for 3-point probing
 2015-03-29 18:56:09 -07:00
Scott Lahteine 1e9999711c Merge pull request #1736 from thinkyhead/fixup_homing 
Fix G28 homing Y with X
 2015-03-29 18:27:17 -07:00
Scott Lahteine d738b7acdd Merge pull request #1724 from Natealus/Development 
Viki 2 Pins from Manual and Azteeg X3 Pro Endstop Reswap
 2015-03-29 18:26:32 -07:00
Scott Lahteine e8ae51bfe3 Fix G28 homing Y with X 
- Fixed a typo causing G28 to home incorrectly
- Added documentation to G28
- Added homeXYZ bools to neaten the code
- Added a note about home_offsets being questionable
 2015-03-29 18:06:59 -07:00
AnHardt 7b2550a604 Times can't be negative. 
cardreader.cpp needs temperature.h for autotempShutdown() when
AUTOTEMP is defined but warns about unused variables.
Unpublished variables by putting them in to temperature.cpp.
 2015-03-30 01:58:46 +02:00
AnHardt 507efa771b Remove unused variable fan_rot 
and satisfy the compiler about the implicit compare.
 2015-03-30 01:46:38 +02:00
AnHardt 2b959a7752 Some additional {} to make the compiler happy. 2015-03-30 01:42:35 +02:00
AnHardt 0f1bd6e4a7 In ST7920_SWSPI_SND_8BIT(uint8_t val) parameter is unsigned 
therefor in macro ST7920_WRITE_BYTE(a) cast a to uint8_t
to make the compiler happy.
 2015-03-30 01:40:58 +02:00
AnHardt 81bab8739d Get back folder symbols on Hitachi displays 
and make use of column 20.
 2015-03-29 17:29:48 +02:00
Natealus ca5821aa57 Made #ifdef DELTA branch instead 
Another fellow here gave me the idea to do it this way
 2015-03-29 01:08:00 -06:00
Natealus 04fda6b3e9 Undesired behavior with endstops swapped 
Made my swap commented out so its the option not the default.
 2015-03-29 00:55:47 -06:00
Natealus ca1477d830 Revert "Undesired behavior with endstops swapped" 
This reverts commit 15028e9b08.
 2015-03-29 00:52:53 -06:00
Natealus 15028e9b08 Undesired behavior with endstops swapped 
I made my changes to swap MIN and MAX endstops on the Azteeg X3 Pro the
option rather than the default to fix unexpected reversal.
 2015-03-29 00:42:40 -06:00
Nate Stokes 18245c6cd2 Update pins_RAMBO.h 
Updated for the changes that Thinkyhead made before I submitted mine.
 2015-03-28 22:29:54 -06:00
Natealus 234a9d0b12 Viki 2 Pins from Manual 
I added in the pins into the new board files for the Azteeg X3, X3 Pro,
Printrboard, and Rambo. I'm sure it can be added for others too but
these are the manual specified pins. Just like many things here though,
I can't test for the boards other than the Azteeg X3 Pro. Hopefully it
works smoothly for everyone who happens on this nifty display. :)
 2015-03-28 22:11:12 -06:00
Scott Lahteine a22efc5f11 Merge pull request #1597 from Wurstnase/g29_auto_script 
G29 auto script
 2015-03-28 20:54:17 -07:00
Scott Lahteine 62a3da9618 Merge pull request #1723 from thinkyhead/tweak_g92 
Tweak G92
 2015-03-28 20:53:37 -07:00
Scott Lahteine afff968e88 ARRAY_BY_EXTRUDERS, shorthand to sync planner 
- Add some documentation to planner and stepper headers
- Patch up RAMBO pins with undefs
- Add `sync_plan_position` inline to set current XYZE
- Swap indices in `extruder_offset` to fix initialization values
 2015-03-28 20:33:21 -07:00
Scott Lahteine 2b0c25a091 Tweak G92 to call plan_set_position only once, yes? 2015-03-28 19:18:24 -07:00
Natealus 22bea37393 Azteeg X3 Pro Pin Revisions 
I added the fan pins in here and left them at -1 in configuration_adv.h
and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the
controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken
case, and HE7 being for part cooling fan. Added in descriptions for the
MIN MAX pin swap and for servo motor additions.
 2015-03-28 20:14:42 -06:00
Scott Lahteine 93dc0d0518 Merge pull request #1718 from AnHardt/blink 
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
 2015-03-28 16:20:33 -07:00
Scott Lahteine edb67ea165 Patch generic delta config 
- Addressing issue mentioned at #1699
 2015-03-28 14:13:25 -07:00
AnHardt c481c3b180 Move variable blink from ultralcd.h to dogm_lcd_implementation.h 
to avoid warnings about unused blink.

Concentrate definitions of variables in dogm_lcd_implementation.h to one place.

Make only local used variable currentfont static.
 2015-03-28 13:14:38 +01:00
Scott Lahteine ba871e46bf Fix compiler warnings 
- Patched up for most included configurations
 2015-03-27 20:29:05 -07:00
Scott Lahteine ffe0df4b36 Latest upstream commits 2015-03-27 18:30:56 -07:00
Scott Lahteine bc2f249cc6 Merge pull request #1622 from AnHardt/tm-utf-minus-kanji 
The big Language Pack
 2015-03-27 18:24:19 -07:00
Scott Lahteine abfcbd793f Merge pull request #1693 from chris-bo/rework_lcd_beeper 
use only one implementation for beeper feedback
 2015-03-27 17:03:38 -07:00
Scott Lahteine 55739a4efe Fix Z_APPLY_STEP 2015-03-27 17:02:11 -07:00
Scott Lahteine df02b992b0 Fix redundant_temperatrure_raw setting 2015-03-27 16:37:22 -07:00
Scott Lahteine fe29bdd72b Also fix temperature externs 2015-03-27 16:26:07 -07:00
Scott Lahteine 578f93bc26 Fixup temp arrays and leveling equation, prepare for merge 2015-03-27 16:20:23 -07:00
Scott Lahteine 7d472367e2 Merge pull request #1713 from epatel/Development 
Parentheses need here otherwise sanitycheck.h does wrong thing on line 222
 2015-03-27 16:14:55 -07:00
Scott Lahteine ce485175eb Give all temp arrays 4 indices 2015-03-27 16:11:28 -07:00
Edward Patel 782464ea4d Parentheses need here otherwise sanitycheck.h does wrong thing on line 222 2015-03-27 20:22:59 +01:00
Scott Lahteine 460f73056b Fix ECHOPAIR ambiguity 
- Also patch up some warnings
 2015-03-27 00:46:39 -07:00
Scott Lahteine 19d418cd6a Fix up the code to eliminate warnings 2015-03-27 00:32:58 -07:00
Scott Lahteine b2496533c6 Put " M" into pmem 2015-03-26 20:30:14 -07:00
Scott Lahteine 267d6bef15 Eliminate most warnings 
- Fix a bug reading `code_value` for `M503 Sn`
- Hide and remove unused variables
 2015-03-26 20:07:17 -07:00
Scott Lahteine 3fd7790a15 Merge branch 'Development' into fixup_leveling 
Latest upstream commits
 2015-03-26 19:56:58 -07:00
Scott Lahteine b76a352d41 Fix the planeNormal calculation 2015-03-26 17:14:07 -07:00
Scott Lahteine 410f64782a Always 4 temp sensors 2015-03-26 16:22:21 -07:00
Scott Lahteine 0b32431551 Remove abs() from planeNormal.z 2015-03-26 16:20:23 -07:00
Scott Lahteine 53169d96e8 Set temp_meas_ready in set_current_temp_raw 2015-03-26 16:02:15 -07:00
Scott Lahteine 06eb7f5b3c Latest upstream commits 2015-03-26 15:30:51 -07:00
Scott Lahteine 04328d7537 Add zprobe_zoffset in set_bed_level_equation_* 
- Also a small tweak to SanityCheck.h
 2015-03-26 15:29:16 -07:00
Scott Lahteine d2e73545ba Merge pull request #1705 from AnHardt/ddt 
Avoid warnings in SanitiCheck.h
 2015-03-26 15:16:37 -07:00
Scott Lahteine 78090275a9 Fix probe range editing 
- Increase the probe offset range to -20…20
- Apply the range limits to the menu item
 2015-03-26 13:52:48 -07:00
AnHardt 1ff6df8f9e Avoid warnings in SanitiCheck.h 
/SanityCheck.h:107:53: warning: missing terminating ' character
...
 2015-03-26 21:30:53 +01:00
AnHardt ebe5b87c2c < like in the oher compareble loops 
to avoid:
Marlin_main.cpp:1790: warning: array subscript is above array bounds.
 2015-03-26 21:18:19 +01:00
AnHardt 20f909567a Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji 
Conflicts:
	README.md
Solved
 2015-03-26 10:05:00 +01:00
Christian Bohn eab5fad539 code formatting 2015-03-26 09:00:34 +01:00
Scott Lahteine abadeac08d Group zprobe_zoffset with bed leveling 2015-03-25 23:06:33 -07:00
Scott Lahteine 9e8427f253 Merge pull request #1698 from zeuseye/Development 
Clean "fromsd" array if not SDSUPPORT
 2015-03-25 22:21:57 -07:00
Scott Lahteine 32331faee4 Prettify Bed Level Correction Matrix 
- Put + in front of positive values in the output
 2015-03-25 22:13:59 -07:00
Scott Lahteine f5f4c2b366 Merge branch 'Development' into fixup_leveling 
Latest upstream commits
 2015-03-25 21:30:49 -07:00
Scott Lahteine 7667023817 Merge pull request #1694 from Wurstnase/fix_z_config 
comment #define Z_DUAL_STEPPER_DRIVERS
 2015-03-25 21:28:17 -07:00
Scott Lahteine 5eff15c409 Merge branch 'Development' into fixup_leveling 
Latest upstream commits
 2015-03-25 21:24:38 -07:00
Scott Lahteine ad05a726c1 Merge pull request #1691 from AnHardt/PID_dt 
Move definition of PIDdT back to temperature.h
 2015-03-25 21:22:39 -07:00
Scott Lahteine 5261d35737 Fix custom m-code behavior 
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
 2015-03-25 21:20:50 -07:00
Scott Lahteine fbf9b21e0c Merge plus fixup zprobe_zoffset 
- Make `zprobe_zoffset` conditional
- Fix ConfigurationStore for `zprobe_zoffset`
 2015-03-25 21:14:00 -07:00
Scott Lahteine 96b5da7198 Fix up bed leveling code 
- Init `zprobe_zoffset`
- Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the
`set_bed_level_equation_*` functions
- Apply standards to `mesh_bed_leveling` files
- Document `MESH_BED_LEVELING`
 2015-03-25 20:36:24 -07:00
Scott Lahteine 02b4f5f9cd Merge pull request #1689 from AnHardt/MAXand161 
Fix MAX6675 again and introduce set_current_temp_raw()
 2015-03-25 20:23:51 -07:00
AnHardt f680e509c4 Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR() 2015-03-25 23:26:06 +01:00
Victor Torre d43d47da14 Clean "fromsd" array is not SDSUPPORT 
if not have SDSUPPORT the fromsd array is not necessary
 2015-03-25 22:05:18 +01:00
AnHardt ac81b4084f Make variables and function static. 2015-03-25 21:37:15 +01:00
alexborro 55025558dc Implement Dry-Run mode in G29 
It just probe all the bed without appliying the matrix.
Useful after a first G29 to check the topology.
 2015-03-25 11:12:30 -03:00
wurstnase a4ad9117dd comment #define Z_DUAL_STEPPER_DRIVERS 2015-03-25 13:46:29 +01:00
chris-bo 2dfd0e5ce7 Update Configuration.h 
documentation how to disable buzzer feedback
 2015-03-25 12:44:29 +01:00
Christian Bohn 4c3cbc0961 use only one implementation for beeper feedback 2015-03-25 12:23:50 +01:00
AnHardt 01cc97a3c3 Corected condition for PIDdT 2015-03-25 12:08:23 +01:00
AnHardt 94330705c7 Move definition of PIDdT back to temperature.h 
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
 2015-03-25 11:51:41 +01:00
AnHardt dd0067afa6 Fix MAX6675 again and introduce set_current_temp_raw() 
to make the temperature-code work again with Arduino 1.0.6.

Sorry could not make an extra block on base level.
 2015-03-25 11:08:24 +01:00
AnHardt 8848b7e9ef Add the missed {} to END_MENU in ultralcd.cpp 
what caused an extra update of encoderLine most of the time.
 2015-03-25 09:48:21 +01:00
AnHardt 4beffbca69 Make SMALL_INFOFONT configurable. 
Tweak the documentation
 2015-03-24 23:40:04 +01:00
alexborro c2ba5d0c09 Fix ZigZag and Topograph table 
ZigZag: Inverted Behavior.. If T supplied, it does not zigzag.
Topograph table: The table was rotated 90º clockwise.
 2015-03-24 15:50:31 -03:00
alexborro 0ce3576685 New Feature: Z_DUAL_ENDSTOPS 
Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z
steppers - Let's call them Z stepper and Z2 stepper.
That way the machine is capable to align the bed during home, since both
Z steppers are homed.
There is also an implementation of M666 (software endstops adjustment)
to this feature.
After Z homing, this adjustment is applied to just one of the steppers
in order to align the bed.
One just need to home the Z axis and measure the distance difference
between both Z axis and apply the math: Z adjust = Z - Z2.
If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it
is.. think about it) and the Z adjust would be positive.
Play a little bit with small adjustments (0.5mm) and check the
behaviour.
The M119 (endstops report) will start reporting the Z2 Endstop as well.
 2015-03-24 14:06:44 -03:00
AnHardt c686069ccd Revert "Remove 6x9 font" 
This reverts commit e6cb8ee188.

Conflicts:
	Marlin/dogm_lcd_implementation.h
Confilkt solved
Needs rework.
 2015-03-24 17:13:05 +01:00
AnHardt b00a531df8 Revert "Removed now unneded FONT_STATUSMENU" 
This reverts commit 8c5bb38748.
 2015-03-24 17:01:56 +01:00
AnHardt 9d589cbb2a Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji 
Conflicts:
	Marlin/example_configurations/delta/generic/Configuration.h
	Marlin/example_configurations/delta/kossel_mini/Configuration.h
	Marlin/language.h

Conflicts solved
 2015-03-24 16:59:15 +01:00
Scott Lahteine 8db4fd7177 Merge branch 'Development' into planner_oh_planner 
Latest upstream commits
 2015-03-23 22:08:50 -07:00
Scott Lahteine 0d81abe1c9 Merge branch 'Development' into config_testing 
Latest upstream commits
 2015-03-23 21:13:04 -07:00
Scott Lahteine 01740fd9c6 Merge branch 'Development' into planner_oh_planner 
Latest upstream commits
 2015-03-23 21:12:36 -07:00
Scott Lahteine fc53e43de6 Don't test raw temp for MAX6675 
- Remove test of raw temp for thermistor 0 when using MAX6675
- Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`
 2015-03-23 20:55:48 -07:00
Scott Lahteine 03fa9fae9f Merge branch 'Development' into fix_temperature_minmax 
Latest upstream commits
 2015-03-23 20:42:48 -07:00
Scott Lahteine 1fac388664 Revert measurement loop 2015-03-23 15:18:22 -07:00
nicolas-rambaud 37cde8a191 Report changes from previous PR from old code base including : 
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
 2015-03-23 12:29:12 +01:00
Scott Lahteine b26a3ea02c Merge pull request #1662 from josla972/refactor_scara 
Refactor SCARA calibration. Save some lines of code and possibly ROM.
 2015-03-23 00:51:18 -07:00
wurstnase e6f6c6e3a1 fix bad insertion config again 2015-03-23 08:32:48 +01:00
Scott Lahteine 6bdee87be3 Cleanup temperature code 
- Get rid of unused temp states in the ISR, resulting in more frequent
temperature reading with fewer sensors
- Shrink code slightly in min/max testing
 2015-03-23 00:27:29 -07:00
Scott Lahteine 34a41648ab Merge branch 'Development' into planner_oh_planner 
Latest upstream commits
 2015-03-22 23:40:29 -07:00
Scott Lahteine 4fbb80567e Get upstream commits 2015-03-22 23:07:22 -07:00
Scott Lahteine 7717e1ce33 Fix bad insert in configuration 2015-03-22 21:48:46 -07:00
Scott Lahteine 146501215f Fix mangled probe_pt calls 
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
 2015-03-22 21:45:20 -07:00
maverikou 15345cc249 Corrected Z_PROBE_ALLEN_KEY behaviour. 2015-03-22 13:54:51 +02:00
maverikou 0f034dd97e Clean up Z_RAISE_AFTER_PROBING to work the same in all code paths except Z_PROBE_SLED. 2015-03-22 13:54:45 +02:00
maverikou 6c96f32069 Blind fix for #1507 2015-03-22 13:54:21 +02:00
Josef Larsson 379348487e Removed malplaced comment. 2015-03-22 12:21:31 +01:00