muele-marlin/Marlin/src/HAL/HAL_STM32F1
2017-11-24 21:59:31 -06:00
..
endstop_interrupts.h Use fastio for STM32F1 endstop interrupts 2017-11-05 19:20:28 -06:00
fastio_Stm32f1.h STM32F1 HAL 2017-09-27 11:20:10 -05:00
HAL_Servo_Stm32f1.cpp STM32F1 HAL 2017-09-27 11:20:10 -05:00
HAL_Servo_Stm32f1.h STM32F1 HAL 2017-09-27 11:20:10 -05:00
HAL_spi_Stm32f1.cpp #ifndef => #if !PIN_EXISTS 2017-11-22 16:28:52 -06:00
HAL_Stm32f1.cpp STM32F1 HAL 2017-09-27 11:20:10 -05:00
HAL_Stm32f1.h Fix _BV already defined warnings 2017-11-24 21:59:31 -06:00
HAL_timers_Stm32f1.cpp Apply some formatting 2017-11-18 03:12:30 -06:00
HAL_timers_Stm32f1.h Fix name collision. timer_t => hal_timer_t 2017-11-05 19:31:07 -06:00
persistent_store_impl.cpp UBL able to generate mesh and save and load it on 32-bit platforms (#8015) 2017-10-18 14:00:29 -05:00
README.md STM32F1 HAL 2017-09-27 11:20:10 -05:00
SanityCheck_Stm32f1.h STM32F1 HAL 2017-09-27 11:20:10 -05:00
spi_pins.h Apply some formatting 2017-11-18 03:12:30 -06:00
stm32f1_flag_script.py Add platformio support for stm32 (#8246) 2017-11-06 23:03:59 -06:00
watchdog_Stm32f1.cpp Apply some formatting 2017-11-18 03:12:30 -06:00
watchdog_Stm32f1.h Apply some formatting 2017-11-18 03:12:30 -06:00

This HAL is for STM32F103 boards used with libmaple/stm32duino Arduino core.

This HAL is in development and has not been tested with an actual printer.

The stm32 core needs a modification in the file util.h to avoid conflict with Marlin macros for Debug.

Since only 1 file needs change in the stm32duino core, it's preferable over making changes to Marlin.

After these lines: <> #else #define ASSERT_FAULT(exp) (void)((0)) #endif <>

Add the following 3 lines: <> #undef DEBUG_NONE #undef DEBUG_FAULT #undef DEBUG_ALL <>

Main developers:

Victorpv

Most up to date repository for this HAL:

https://github.com/victorpv/Marlin/tree/bugfix-2.0.x

PRs should be first sent to that fork, and once tested merged to Marlin bugfix-2.0.x branch.