1.7 KiB
1.7 KiB
Embassy RP Skeleton
Summary
This project skeleton is intended as a starting point for developing your own firmware for the rp2040 based on
the embassy asynchronous embedded development framework.
It includes all of the knurling-rs tooling (defmt, defmt-rtt, panic-probe, flip-link,
probe-run) to improve the development process.
The default Cargo runner is configured as probe-run, so you can build, flash and run your firmware with
output from the device via RTT with:
cargo run --release
If you want to use a different runner with your debugger (e.g., cargo-embed, probe-rs-debugger, etc.) or
if you aren't using a debugger and want the runner to flash the firmware via USB (e.g., elf2uf2-rs,
picotool, etc.) then see the Runners section.
Table of Contents
Requirements
- Rust
- Rustup
- Cargo
- Toolchain Support
- Nightly
- Cortex Target
- Flip-Link
- Probe-Run
- CMSIS-DAP Probe
Setup
...
Usage
...
Runners
...
Appendix
...