62 lines
1.7 KiB
Markdown
62 lines
1.7 KiB
Markdown
# Embassy RP Skeleton
|
|
## Summary
|
|
This project skeleton is intended as a starting point for developing your own firmware for the [`rp2040`][1] based on
|
|
the [`embassy`][2] asynchronous embedded development framework.
|
|
|
|
It includes all of the [`knurling-rs`][3] tooling ([`defmt`][4], [`defmt-rtt`][4], [`panic-probe`][4], [`flip-link`][5],
|
|
[`probe-run`][6]) to improve the development process.
|
|
|
|
The default [`Cargo`][7] runner is configured as [`probe-run`][6], so you can build, flash and run your firmware _with_
|
|
output from the device via RTT with:
|
|
|
|
```shell
|
|
cargo run --release
|
|
```
|
|
|
|
If you want to use a different runner with your debugger (e.g., [`cargo-embed`][8], [`probe-rs-debugger`][9], etc.) or
|
|
if you _aren't_ using a debugger and want the runner to flash the firmware via USB (e.g., [`elf2uf2-rs`][10],
|
|
[`picotool`][11], etc.) then see the [Runners](#runners) section.
|
|
|
|
## Table of Contents
|
|
1. [Requirements](#requirements)
|
|
2. [Setup](#setup)
|
|
3. [Usage](#usage)
|
|
4. [Runners](#runners)
|
|
5. [Appendix](#appendix)
|
|
|
|
## Requirements
|
|
* Rust
|
|
- Rustup
|
|
- Cargo
|
|
* Toolchain Support
|
|
- Nightly
|
|
- Cortex Target
|
|
* Flip-Link
|
|
* Probe-Run
|
|
* CMSIS-DAP Probe
|
|
|
|
## Setup
|
|
...
|
|
|
|
## Usage
|
|
...
|
|
|
|
## Runners
|
|
...
|
|
|
|
## Appendix
|
|
...
|
|
|
|
<!-- Reference -->
|
|
[1]: https://www.raspberrypi.com/documentation/microcontrollers/rp2040.html
|
|
[2]: https://embassy.dev/dev/index.html
|
|
[3]: https://github.com/knurling-rs/app-template
|
|
[4]: https://github.com/knurling-rs/defmt
|
|
[5]: https://github.com/knurling-rs/flip-link
|
|
[6]: https://github.com/knurling-rs/probe-run
|
|
[7]: https://doc.rust-lang.org/cargo/
|
|
[8]: https://github.com/probe-rs/cargo-embed
|
|
[9]: https://github.com/probe-rs/vscode
|
|
[10]: https://github.com/JoNil/elf2uf2-rs
|
|
[11]: https://github.com/raspberrypi/picotool
|