muele-marlin/Marlin/src/module/probe.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * module/probe.h - Move, deploy, enable, etc.
 */

#include "../inc/MarlinConfig.h"

#include "motion.h"

#if HAS_BED_PROBE
  enum ProbePtRaise : uint8_t {
    PROBE_PT_NONE,      // No raise or stow after run_z_probe
    PROBE_PT_STOW,      // Do a complete stow after run_z_probe
    PROBE_PT_LAST_STOW, // Stow for sure, even in BLTouch HS mode
    PROBE_PT_RAISE,     // Raise to "between" clearance after run_z_probe
    PROBE_PT_BIG_RAISE  // Raise to big clearance after run_z_probe
  };
#endif

#if USES_Z_MIN_PROBE_PIN
  #define PROBE_TRIGGERED() (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING)
#else
  #define PROBE_TRIGGERED() (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING)
#endif

#if ENABLED(PREHEAT_BEFORE_LEVELING)
  #ifndef LEVELING_NOZZLE_TEMP
    #define LEVELING_NOZZLE_TEMP 0
  #endif
  #ifndef LEVELING_BED_TEMP
    #define LEVELING_BED_TEMP 0
  #endif
#endif

class Probe {
public:

  #if ENABLED(SENSORLESS_PROBING)
    typedef struct { bool x:1, y:1, z:1; } sense_bool_t;
    static sense_bool_t test_sensitivity;
  #endif

  #if HAS_BED_PROBE

    static xyz_pos_t offset;

    #if EITHER(PREHEAT_BEFORE_PROBING, PREHEAT_BEFORE_LEVELING)
      static void preheat_for_probing(const celsius_t hotend_temp, const celsius_t bed_temp);
    #endif

    static bool set_deployed(const bool deploy);

    #if IS_KINEMATIC

      #if HAS_PROBE_XY_OFFSET
        // Return true if the both nozzle and the probe can reach the given point.
        // Note: This won't work on SCARA since the probe offset rotates with the arm.
        static bool can_reach(const_float_t rx, const_float_t ry) {
          return position_is_reachable(rx - offset_xy.x, ry - offset_xy.y) // The nozzle can go where it needs to go?
              && position_is_reachable(rx, ry, ABS(PROBING_MARGIN));       // Can the nozzle also go near there?
        }
      #else
        static bool can_reach(const_float_t rx, const_float_t ry) {
          return position_is_reachable(rx, ry, PROBING_MARGIN);
        }
      #endif

    #else

      /**
       * Return whether the given position is within the bed, and whether the nozzle
       * can reach the position required to put the probe at the given position.
       *
       * Example: For a probe offset of -10,+10, then for the probe to reach 0,0 the
       *          nozzle must be be able to reach +10,-10.
       */
      static bool can_reach(const_float_t rx, const_float_t ry) {
        return position_is_reachable(rx - offset_xy.x, ry - offset_xy.y)
            && COORDINATE_OKAY(rx, min_x() - fslop, max_x() + fslop)
            && COORDINATE_OKAY(ry, min_y() - fslop, max_y() + fslop);
      }

    #endif

    static void move_z_after_probing() {
      #ifdef Z_AFTER_PROBING
        do_z_clearance(Z_AFTER_PROBING, true); // Move down still permitted
      #endif
    }
    static float probe_at_point(const_float_t rx, const_float_t ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true);
    static float probe_at_point(const xy_pos_t &pos, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true) {
      return probe_at_point(pos.x, pos.y, raise_after, verbose_level, probe_relative, sanity_check);
    }

  #else

    static constexpr xyz_pos_t offset = xyz_pos_t(LINEAR_AXIS_ARRAY(0, 0, 0, 0, 0, 0)); // See #16767

    static bool set_deployed(const bool) { return false; }

    static bool can_reach(const_float_t rx, const_float_t ry) { return position_is_reachable(rx, ry); }

  #endif

  static void move_z_after_homing() {
    #ifdef Z_AFTER_HOMING
      do_z_clearance(Z_AFTER_HOMING, true);
    #elif BOTH(Z_AFTER_PROBING, HAS_BED_PROBE)
      move_z_after_probing();
    #endif
  }

  static bool can_reach(const xy_pos_t &pos) { return can_reach(pos.x, pos.y); }

  static bool good_bounds(const xy_pos_t &lf, const xy_pos_t &rb) {
    return (
      #if IS_KINEMATIC
        can_reach(lf.x, 0) && can_reach(rb.x, 0) && can_reach(0, lf.y) && can_reach(0, rb.y)
      #else
        can_reach(lf) && can_reach(rb)
      #endif
    );
  }

  // Use offset_xy for read only access
  // More optimal the XY offset is known to always be zero.
  #if HAS_PROBE_XY_OFFSET
    static const xy_pos_t &offset_xy;
  #else
    static constexpr xy_pos_t offset_xy = xy_pos_t({ 0, 0 });   // See #16767
  #endif

  static bool deploy() { return set_deployed(true); }
  static bool stow()   { return set_deployed(false); }

  #if HAS_BED_PROBE || HAS_LEVELING
    #if IS_KINEMATIC
      static constexpr float printable_radius = (
        TERN_(DELTA, DELTA_PRINTABLE_RADIUS)
        TERN_(IS_SCARA, SCARA_PRINTABLE_RADIUS)
      );
      static constexpr float probe_radius(const xy_pos_t &probe_offset_xy = offset_xy) {
        return printable_radius - _MAX(PROBING_MARGIN, HYPOT(probe_offset_xy.x, probe_offset_xy.y));
      }
    #endif

    static constexpr float _min_x(const xy_pos_t &probe_offset_xy = offset_xy) {
      return TERN(IS_KINEMATIC,
        (X_CENTER) - probe_radius(probe_offset_xy),
        _MAX((X_MIN_BED) + (PROBING_MARGIN_LEFT), (X_MIN_POS) + probe_offset_xy.x)
      );
    }
    static constexpr float _max_x(const xy_pos_t &probe_offset_xy = offset_xy) {
      return TERN(IS_KINEMATIC,
        (X_CENTER) + probe_radius(probe_offset_xy),
        _MIN((X_MAX_BED) - (PROBING_MARGIN_RIGHT), (X_MAX_POS) + probe_offset_xy.x)
      );
    }
    static constexpr float _min_y(const xy_pos_t &probe_offset_xy = offset_xy) {
      return TERN(IS_KINEMATIC,
        (Y_CENTER) - probe_radius(probe_offset_xy),
        _MAX((Y_MIN_BED) + (PROBING_MARGIN_FRONT), (Y_MIN_POS) + probe_offset_xy.y)
      );
    }
    static constexpr float _max_y(const xy_pos_t &probe_offset_xy = offset_xy) {
      return TERN(IS_KINEMATIC,
        (Y_CENTER) + probe_radius(probe_offset_xy),
        _MIN((Y_MAX_BED) - (PROBING_MARGIN_BACK), (Y_MAX_POS) + probe_offset_xy.y)
      );
    }

    static float min_x() { return _min_x() TERN_(NOZZLE_AS_PROBE, TERN_(HAS_HOME_OFFSET, - home_offset.x)); }
    static float max_x() { return _max_x() TERN_(NOZZLE_AS_PROBE, TERN_(HAS_HOME_OFFSET, - home_offset.x)); }
    static float min_y() { return _min_y() TERN_(NOZZLE_AS_PROBE, TERN_(HAS_HOME_OFFSET, - home_offset.y)); }
    static float max_y() { return _max_y() TERN_(NOZZLE_AS_PROBE, TERN_(HAS_HOME_OFFSET, - home_offset.y)); }

    // constexpr helpers used in build-time static_asserts, relying on default probe offsets.
    class build_time {
      static constexpr xyz_pos_t default_probe_xyz_offset =
        #if HAS_BED_PROBE
          NOZZLE_TO_PROBE_OFFSET
        #else
          { 0 }
        #endif
      ;
      static constexpr xy_pos_t default_probe_xy_offset = { default_probe_xyz_offset.x,  default_probe_xyz_offset.y };

    public:
      static constexpr bool can_reach(float x, float y) {
        #if IS_KINEMATIC
          return HYPOT2(x, y) <= sq(probe_radius(default_probe_xy_offset));
        #else
          return COORDINATE_OKAY(x, _min_x(default_probe_xy_offset) - fslop, _max_x(default_probe_xy_offset) + fslop)
              && COORDINATE_OKAY(y, _min_y(default_probe_xy_offset) - fslop, _max_y(default_probe_xy_offset) + fslop);
        #endif
      }

      static constexpr bool can_reach(const xy_pos_t &point) { return can_reach(point.x, point.y); }
    };

    #if NEEDS_THREE_PROBE_POINTS
      // Retrieve three points to probe the bed. Any type exposing set(X,Y) may be used.
      template <typename T>
      static void get_three_points(T points[3]) {
        #if HAS_FIXED_3POINT
          #define VALIDATE_PROBE_PT(N) static_assert(Probe::build_time::can_reach(xy_pos_t{PROBE_PT_##N##_X, PROBE_PT_##N##_Y}), \
            "PROBE_PT_" STRINGIFY(N) "_(X|Y) is unreachable using default NOZZLE_TO_PROBE_OFFSET and PROBING_MARGIN");
          VALIDATE_PROBE_PT(1); VALIDATE_PROBE_PT(2); VALIDATE_PROBE_PT(3);
          points[0] = xy_float_t({ PROBE_PT_1_X, PROBE_PT_1_Y });
          points[1] = xy_float_t({ PROBE_PT_2_X, PROBE_PT_2_Y });
          points[2] = xy_float_t({ PROBE_PT_3_X, PROBE_PT_3_Y });
        #else
          #if IS_KINEMATIC
            constexpr float SIN0 = 0.0, SIN120 = 0.866025, SIN240 = -0.866025,
                            COS0 = 1.0, COS120 = -0.5    , COS240 = -0.5;
            points[0] = xy_float_t({ (X_CENTER) + probe_radius() * COS0,   (Y_CENTER) + probe_radius() * SIN0 });
            points[1] = xy_float_t({ (X_CENTER) + probe_radius() * COS120, (Y_CENTER) + probe_radius() * SIN120 });
            points[2] = xy_float_t({ (X_CENTER) + probe_radius() * COS240, (Y_CENTER) + probe_radius() * SIN240 });
          #else
            points[0] = xy_float_t({ min_x(), min_y() });
            points[1] = xy_float_t({ max_x(), min_y() });
            points[2] = xy_float_t({ (min_x() + max_x()) / 2, max_y() });
          #endif
        #endif
      }
    #endif

  #endif // HAS_BED_PROBE

  #if HAS_Z_SERVO_PROBE
    static void servo_probe_init();
  #endif

  #if HAS_QUIET_PROBING
    static void set_probing_paused(const bool p);
  #endif

  #if ENABLED(PROBE_TARE)
    static void tare_init();
    static bool tare();
  #endif

  // Basic functions for Sensorless Homing and Probing
  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
    static void enable_stallguard_diag1();
    static void disable_stallguard_diag1();
    static void set_homing_current(const bool onoff);
  #endif

private:
  static bool probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s);
  static void do_z_raise(const float z_raise);
  static float run_z_probe(const bool sanity_check=true);
};

extern Probe probe;