BsCmOD
34d9cb6778
Enhanced Italian language ( #20551 )
2020-12-23 01:01:18 -06:00
LinFor
6af6a35d9d
FTDI EVE: Cyrillic font, some minor fixes ( #20517 )
2020-12-23 00:51:59 -06:00
yysh12
6ec4e744c0
Improve plan_arc circle detection ( #20440 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-23 00:12:20 -06:00
wmariz
c87c354403
Refactor 'Level Corners with Probe' ( #20460 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-23 00:10:56 -06:00
thinkyhead
56fac55a39
[cron] Bump distribution date (2020-12-23)
2020-12-23 00:20:43 +00:00
Jan Krajdl
de9c0eda36
Support RGBW on PCA9632 ( #20455 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-22 08:27:14 -06:00
Tanguy Pruvot
c559fc8227
Fix G28 leveling state, UBL compile ( #20499 )
2020-12-22 07:01:24 -06:00
Victor Oliveira
cfad5cb435
Unify FYSETC F6 1.3 / 1.4 ( #20507 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-12-22 06:57:11 -06:00
Serhiy-K
0b3b4da7d0
STM32F1xx support for TFTGLCD ( #20515 )
2020-12-22 06:56:00 -06:00
Keith Bennett
a0c8d348a0
Anet ET4 / ET4P and Anet TFT28 / TFT35 ( #20280 )
2020-12-22 06:51:29 -06:00
Sean McGroty
08dcd1f680
Creality v4.3.1 (Ender 6) board ( #20512 )
2020-12-22 06:25:12 -06:00
X-Ryl669
91730d71ff
Improve Touch Calibration screen ( #20524 )
2020-12-22 06:17:06 -06:00
Jason Smith
5e3be83dbb
Overrides to prevent STM32 timer conflicts ( #20545 )
2020-12-22 06:02:25 -06:00
Chris Pepper
c1b900aae9
Fix UBL mesh inset Z position ( #20538 )
2020-12-22 05:59:25 -06:00
Jason Smith
094e822070
Improve STM32 timer conflict messages ( #20544 )
2020-12-22 05:49:34 -06:00
LinFor
82540be931
FTDI EVE custom user menus ( #20518 )
2020-12-22 00:31:14 -06:00
LinFor
36aff1e464
12-bit ADC resolution for STM32 ( #20519 )
2020-12-21 18:30:03 -06:00
thinkyhead
ba1176108a
[cron] Bump distribution date (2020-12-22)
2020-12-22 00:19:00 +00:00
LinFor
9b3e16cdd0
Add Tune -> Advanced Settings to FTDI EVE ( #20532 )
2020-12-21 18:06:27 -06:00
Scott Lahteine
34b6bca006
Tweak FTDI spacing
2020-12-21 17:48:03 -06:00
Scott Lahteine
6429be6efc
Robin pins followup
2020-12-21 17:47:22 -06:00
LinFor
ba16c53218
Fix some Russian ( #20529 )
2020-12-21 17:45:00 -06:00
cr20-123
0d95f67f2e
Fix G34 compile with bed leveling disabled ( #20537 )
2020-12-21 17:43:45 -06:00
Sebastiaan Dammann
3ec59b36eb
Add BTT SKR CR6 board ( #20522 )
2020-12-21 17:36:43 -06:00
Scott Lahteine
c7ecfe28e7
Clean up some pins
2020-12-21 17:36:43 -06:00
Dick Streefland
7afd274d0c
Apply HOME_AFTER_DEACTIVATE for 'G28 O' ( #20525 )
2020-12-21 01:49:00 -06:00
Dick Streefland
71bec0824c
Get E3V2 DWIN MACHINE_SIZE
from config ( #20526 )
2020-12-21 01:47:49 -06:00
thinkyhead
4764e2c544
[cron] Bump distribution date (2020-12-21)
2020-12-21 00:17:17 +00:00
Serhiy-K
d8687512b1
Update Russian and Ukrainian languages ( #20508 )
2020-12-20 00:33:23 -06:00
Scott Lahteine
62cc65cafe
Languages cleanup
2020-12-20 00:30:20 -06:00
Foxies
0a99f8feed
Migrate Hispeedv1 (QQS-Pro) to HAL/STM32 ( #20354 )
2020-12-20 00:17:24 -06:00
Jason Smith
6dfcd491d0
Fix Creality EEPROM watchdog freq. ( #20510 )
2020-12-19 23:55:57 -06:00
InsanityAutomation
2963229dfa
Probe Tare, Probe Activation Switch ( #20379 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-19 22:11:43 -06:00
InsanityAutomation
7a168205eb
Minimum temp options for Probing and G12 Nozzle Clean ( #20383 )
...
Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-12-19 22:02:38 -06:00
Keith Bennett
9a8f8f8284
Let boards set Default TMC Slave Addresses ( #20498 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-12-19 21:48:31 -06:00
thinkyhead
57f4d0523e
[cron] Bump distribution date (2020-12-20)
2020-12-20 00:14:49 +00:00
Scott Lahteine
45b11553f4
Tweaks for pins_BTT_SKR_common.h
2020-12-18 21:15:48 -06:00
Scott Lahteine
e5d0b27aaf
Rename QUIET_PROBING
2020-12-18 21:13:50 -06:00
thinkyhead
a33ae10c56
[cron] Bump distribution date (2020-12-19)
2020-12-19 00:15:28 +00:00
Tanguy Pruvot
017d97fd0e
DOGM: Slow down touchscreen calibration ( #20454 )
2020-12-18 16:21:00 -06:00
Victor Oliveira
b167cd2427
MKS Robin Nano V3 and STM32F4x0Vx Variant ( #20430 )
2020-12-18 16:18:04 -06:00
thinkyhead
fae3c860a1
[cron] Bump distribution date (2020-12-18)
2020-12-18 00:15:25 +00:00
grauerfuchs
e9677594ea
Fix and optimize MightyBoard ( #20493 )
2020-12-17 17:22:59 -06:00
Jason Smith
7b9ff164cc
Balance CI tests ( #20485 )
2020-12-17 06:18:07 -06:00
nb-rapidia
978d93af88
Make M220 B / R a standard feature ( #20355 )
2020-12-17 06:13:07 -06:00
ellensp
31337826a3
Fix ZoneStar LCD 2004 buttons ( #20489 )
2020-12-17 06:05:25 -06:00
rafaljot
fbcc07261d
Homing feedrates as XYZ array ( #20426 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-17 06:02:05 -06:00
Scott Lahteine
20b3af1cc2
Use homing_feedrate function
2020-12-16 22:19:04 -06:00
thinkyhead
6d47baee5d
[cron] Bump distribution date (2020-12-17)
2020-12-17 00:15:48 +00:00
Tanguy Pruvot
c6dcf9d006
Update French language ( #20472 )
2020-12-16 00:46:10 -06:00
Scott Lahteine
f934b774a1
Update Hungarian language
...
Co-Authored-By: Zs.Antal <45710979+AntoszHUN@users.noreply.github.com>
2020-12-16 00:42:55 -06:00
Giuliano Zaro
e6fdf530b8
Update Italian language ( #20480 )
2020-12-16 00:35:13 -06:00
thinkyhead
1c4f125cb0
[cron] Bump distribution date (2020-12-16)
2020-12-16 00:14:09 +00:00
Scott Lahteine
3f93b8baed
Trust STM32 gcc versions
2020-12-15 01:06:32 -06:00
Scott Lahteine
637123f340
Update some LCD includes
2020-12-15 01:06:27 -06:00
Scott Lahteine
7243ea549d
Update some pins errors
2020-12-15 00:49:55 -06:00
Sebastiaan Dammann
686bb056a4
Creality v4.5.3 (CR-6 SE, CR-6 MAX) ( #20468 )
2020-12-15 00:33:01 -06:00
JoAnn Manges
1be16e3d8c
Fix RESTORE_LEVELING_AFTER_G28 ( #20471 )
2020-12-15 00:16:50 -06:00
Scott Lahteine
69999f962a
Please install the EditorConfig plugin
2020-12-14 21:27:12 -06:00
Scott Lahteine
5a6fc3e5b7
Auto-check followup
2020-12-14 21:08:09 -06:00
kisslorand
7be57ff9f0
Fix M1001 auto-check logic ( #20456 )
2020-12-14 21:04:45 -06:00
Scott Lahteine
80bde7b6b5
Always enable leveling after G28
2020-12-14 20:34:22 -06:00
Scott Lahteine
e349a44c60
Preheat before leveling
2020-12-14 20:34:22 -06:00
Scott Lahteine
fbefe55102
Fix formatting
2020-12-14 20:34:22 -06:00
thinkyhead
dee475cee1
[cron] Bump distribution date (2020-12-15)
2020-12-15 00:13:55 +00:00
Chris Pepper
9fd358f10c
LPC176x framework update ( #20469 )
2020-12-14 22:36:25 +00:00
thinkyhead
8c05053951
[cron] Bump distribution date (2020-12-14)
2020-12-14 00:14:07 +00:00
Scott Lahteine
b0392be4bf
SHORT_MANUAL_Z_MOVE => FINE_MANUAL_MOVE
2020-12-13 01:54:31 -06:00
Scott Lahteine
c824086825
Adjust planner debugging
2020-12-13 01:54:31 -06:00
FanDjango
1a9644cef9
Probe Offset Wizard followupBack to PROBE_PT_RAISE/separate STOW, make "PROBING" msg appear ( #20439 )
...
* Go back to always use PROBE_PT_RAISE with a discrete stow. This ensures a raise above the bed, while stowing prior to exiting the wizard.
* Fix issue preventing text while moving to X/Y position
Co-authored-by: FanDjango <FanDjango@users.noreply.github.com>
2020-12-12 17:18:33 -08:00
thinkyhead
8723440d1d
[cron] Bump distribution date (2020-12-13)
2020-12-13 00:14:25 +00:00
qwewer0
ea9b4dc82c
Improve ASSISTED_TRAMMING_WIZARD probe stowing ( #20437 )
...
* When BLTOUCH_HS_MODE enabled, stow pin before user interaction
* For all probes, ensure probe stows at end of wizard
2020-12-12 11:03:28 -08:00
ellensp
2eab920935
Add HAS_PIN_27_BOARD for CREALITY_V4 ( #20446 )
...
Co-authored-by: ellensp <ellensp@hotmsil.com>
2020-12-12 10:59:17 -08:00
leodoener
087a6fea13
Fix SDCARD_SORT_ALPHA on Ender 3 V2 ( #20443 )
2020-12-11 23:20:24 -03:00
Scott Lahteine
9c9113e225
Better animated boot screen
2020-12-11 18:24:27 -06:00
thinkyhead
8f008ac75d
[cron] Bump distribution date (2020-12-12)
2020-12-12 00:13:47 +00:00
FanDjango
43222d5879
Probe offset wizard fixes ( #20414 )
...
* STOW probe, reverting incorrect earlier change from #20344
* Adjust soft endstop disables, to ensure travel below bed functions properly
Co-authored-by: FanDjango <FanDjango@users.noreply.github.com>
2020-12-11 00:06:57 -08:00
elasticdotventures
04a3bd0d34
Z_SENSORLESS sanity checks ( #20421 )
...
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-10 23:33:29 -08:00
thinkyhead
af70e80816
[cron] Bump distribution date (2020-12-11)
2020-12-11 00:13:48 +00:00
ellensp
22de37ad50
Fix UBL Debug Messages ( #20423 )
...
Co-authored-by: ellensp <ellensp@hotmsil.com>
2020-12-10 15:30:58 -03:00
Keith Bennett
6cf4b888e1
Clarify "not Interrupt-capable" error message ( #20419 )
2020-12-10 15:27:02 -03:00
thinkyhead
6557751199
[cron] Bump distribution date (2020-12-10)
2020-12-10 00:13:42 +00:00
Victor Oliveira
6e4925e6b6
MKS Robin Pins fixes for STM32 and STM32F1 ( #20404 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-09 18:43:49 -03:00
InsanityAutomation
3404cb1fc4
Move ExtUI ABL mesh edit, limit to bilinear ( #20381 )
...
* Move ExtUI call
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
Co-authored-by: Sebastiaan Dammann <sebastiaandammann@outlook.com>
2020-12-09 09:07:26 -08:00
Marcio T
f3bddc4e4e
Fixes and additions to FTDI EVE Touch UI ( #20393 )
...
- Fixed name conflict with "SUBSCRIPT_TWO"
- Fixed rendering bugs in "Leveling Menu"
- Only show "Bed Mesh Screen" when UBL is enabled
- Removed CocoaPress code from generic "Main Menu"
- Removed CocoaPress code from LulzBot Bio "Status" screen
- Moved generic "Move Axis" functionality into a base class
- Added CocoaPress custom screens:
- Status Screen
- Unload Cartridge
- Load Chocolate
- Main Menu
- Advanced Settings
- XYZ Move (based on "Move Axis" base class)
- Extrusion Move (based on "Move Axis" base class)
- CocoaPress tweaks to "Temperature" screen
- Fix FTDI EVE Touch UI compilation errors when not using leveling.
2020-12-09 05:09:31 -06:00
Mike La Spina
3e68e4b418
Fix Spindle/Laser Control menu ( #20347 )
2020-12-09 04:37:26 -06:00
swissnorp
edb2a83e71
Allow positive Z nozzle to probe offset ( #20344 )
...
* Allow a positive value for z offset from nozzle to probe without sanity checks
* Simplify menu_probe_offset.cpp (HOMING_Z_WITH_PROBE)
* Add some more explanation to Configuration Files
* Raise after probe_at_point as if homed
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-09 01:06:50 -08:00
Keith Bennett
2a4f8acd62
Clarify Delta & SCARA config location ( #20403 )
2020-12-08 22:12:42 -08:00
Scott Lahteine
885b0d2ec5
Style, spacing, typo cleanup for recent changes
2020-12-08 20:18:29 -06:00
thinkyhead
66834cf324
[cron] Bump distribution date (2020-12-09)
2020-12-09 00:13:32 +00:00
Victor Oliveira
9ead6a30f2
SPI TFT for STM32F4 boards ( #20384 )
...
* fix pinsDebug for F1 boards
* add MKS Robin PRO V2 board - development board
* tft spi working with F4 boards
* pins formating
* sanity check for TFT on supported cores in STM32
* Fix tabs/spaces in pins file
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-07 21:26:39 -08:00
thinkyhead
af20db4512
[cron] Bump distribution date (2020-12-08)
2020-12-08 00:13:33 +00:00
ellensp
fee375f31f
Allow BTT EXP-MOT be used with Displays that needs only EXP 1 ( #20396 )
...
Co-authored-by: ellensp <ellensp@ellensp-HP-ProBook-6470b.fritz.box>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
2020-12-07 17:57:00 -03:00
ellensp
182fdd95c3
Shorten Filament Load/Unload Strings to Fit on Graphical Displays ( #20369 )
...
Co-authored-by: ellensp <ellensp@ellensp-HP-ProBook-6470b.fritz.box>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
2020-12-07 17:53:53 -03:00
Scott Lahteine
7f20184ebc
Fix auto#.g file handling, add NO_SD_AUTOSTART ( #20071 )
2020-12-07 05:53:15 -06:00
Scott Lahteine
b04914fb72
More LPC P-string macros
2020-12-07 05:06:24 -06:00
Scott Lahteine
2ecb4fad72
Watch idle() depth over 5
2020-12-07 04:38:14 -06:00
Scott Lahteine
ee4c2b36b8
Fix fileExists, use openFailed
2020-12-07 04:38:14 -06:00
thinkyhead
00143f77d0
[cron] Bump distribution date (2020-12-07)
2020-12-07 00:13:45 +00:00
Scott Lahteine
6f4589b375
G28 followup
2020-12-05 23:06:15 -06:00
Scott Lahteine
139a33c9fc
G28 tweaks
2020-12-05 20:14:44 -06:00
Scott Lahteine
a3f6e48eb6
Fix STM32F1 SERIAL_GET_TX_BUFFER_FREE
2020-12-05 20:05:39 -06:00
Scott Lahteine
a8dffdebd4
Move G29 3-point startup earlier
2020-12-05 20:05:39 -06:00
Scott Lahteine
889695b6ba
ExtUI homing / leveling additions
2020-12-05 18:29:03 -06:00
Scott Lahteine
bf4c08bce1
Use 'nearby' for 'near'
2020-12-05 18:27:18 -06:00
Scott Lahteine
9e68c9a214
Creality 4.5.2 format and fix
2020-12-05 18:27:18 -06:00
LinFor
7a6b742d12
Fix FYSETC S6 I2C EEPROM size ( #20340 )
...
Both V1.2 and V2.0 boards have a 24LC16, which is a 2kB EEPROM.
Co-authored-by: PingWin <kirill@shashlov.ru>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-05 16:19:17 -08:00
thinkyhead
2dbd2063f8
[cron] Bump distribution date (2020-12-06)
2020-12-06 00:13:51 +00:00
InsanityAutomation
e8ed880e62
Add Creality 4.5.2 board ( #20378 )
...
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-05 13:23:58 -08:00
Jason Smith
2c8f566231
Suspend Servos for STM32+NeoPixel ( #19963 )
2020-12-05 00:02:58 -06:00
Jason Smith
21ee7b1c86
Fix TMC_HOME_PHASE divide by zero ( #20368 )
2020-12-04 23:58:39 -06:00
Scott Lahteine
5fdd949115
Improved Longer3D LKx Pro board ( #20372 )
...
Co-authored-by: mrv96 <marione96@live.it>
2020-12-04 23:56:20 -06:00
Tanguy Pruvot
0a03ef4b6f
Don’t use near keyword as variable name ( #20374 )
2020-12-04 20:29:55 -08:00
thinkyhead
71db4f0426
[cron] Bump distribution date (2020-12-05)
2020-12-05 00:13:14 +00:00
Belin Fieldson
465840e1fb
Loosen E on pause for fila-manipulation ( #20346 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-04 04:49:30 -06:00
Jason Smith
d17db47775
Fix MESH_BED_LEVELING w/o SEGMENT_LEVELED_MOVES ( #20363 )
2020-12-03 19:33:46 -08:00
thinkyhead
517bcd2b5d
[cron] Bump distribution date (2020-12-04)
2020-12-04 00:12:52 +00:00
Scott Lahteine
a1f319d5b6
Consolidate common pin includes
2020-12-03 05:53:07 -06:00
ellensp
31352f8a8a
Fix up start, monitor baud ( #20326 )
2020-12-03 04:44:33 -06:00
yysh12
2878876064
Fix circle arc condition ( #20322 )
2020-12-03 04:40:39 -06:00
thinkyhead
7bf04d1526
[cron] Bump distribution date (2020-12-03)
2020-12-03 00:12:40 +00:00
Jason Smith
a4d6908d55
Permit SD EEPROM emulation on E3V2 ( #20353 )
2020-12-02 05:23:34 -06:00
Jason Smith
a4618309ce
Fix E3V2 DWIN Jerk Menu ( #20352 )
...
* Fix E3V2 DWIN build without CLASSIC_JERK
* Fix jerk edits applying to wrong index
2020-12-02 01:31:06 -08:00
Luu Lac
257dc6d173
Help hosts when password-locked ( #20348 )
2020-12-01 23:52:09 -06:00
Scott Lahteine
c353eab898
Level Bed Corners is a sub-menu
2020-12-01 21:54:58 -06:00
thinkyhead
7226f6834e
[cron] Bump distribution date (2020-12-02)
2020-12-02 00:12:48 +00:00
Scott Lahteine
2e010909ac
Tweak to EEPROM safe delay
2020-12-01 16:14:37 -06:00
Jason Smith
0d080cea83
Fix E3V2 Control Menu when returning from Info ( #20338 )
2020-12-01 00:29:21 -08:00
Jason Smith
6f4381df53
Prevent Watchdog reset writing Creality 4.x EEPROM ( #20328 )
2020-11-30 22:25:44 -08:00
thinkyhead
db8fb9a03a
[cron] Bump distribution date (2020-12-01)
2020-12-01 00:13:08 +00:00
Jason Smith
87ede6fa1b
Increase E3V2 DWIN steps/mm range to 999.9 ( #20324 )
2020-11-30 04:44:34 -08:00
Scott Lahteine
fd35d1b8a6
General cleanup
2020-11-29 20:50:02 -06:00
Scott Lahteine
8fd8772a6f
Adjust axis homed / trusted methods ( #20323 )
2020-11-29 19:06:40 -06:00
thinkyhead
0f9ac3026d
[cron] Bump distribution date (2020-11-30)
2020-11-30 00:12:42 +00:00
Jason Smith
df0a0c9490
Leveling Fade Height default setting ( #20316 )
2020-11-29 15:00:08 -06:00
Jason Smith
f2b9be6e70
Fix STM32F1 'freeMemory()' warnings ( #20319 )
2020-11-29 14:57:05 -06:00
Alexander D. Kanevskiy
39abda8743
SKR E3 Turbo Controller Fan ( #20320 )
2020-11-29 14:55:18 -06:00
yysh12
dcb101224f
Arc Direction followup for circles ( #20314 )
2020-11-29 14:50:54 -06:00
thinkyhead
e7e1dcf190
[cron] Bump distribution date (2020-11-29)
2020-11-29 00:12:56 +00:00
thinkyhead
d466ac12ea
[cron] Bump distribution date (2020-11-28)
2020-11-28 00:12:13 +00:00
Thomas Niccolo Reyes
1c7f53bbb2
Fix M73 LCD code typo ( #20300 )
2020-11-27 15:26:19 -06:00
Sergey1560
0acd751e2d
Group related homing options ( #20283 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-27 00:00:25 -06:00
yysh12
bab660ca7d
Fix G2/G3 arcs > 180° ( #20292 )
2020-11-26 23:29:07 -06:00
ellensp
109f68f7df
Fix BTT GTR 1.0 endstop/DIAG pins ( #20296 )
2020-11-26 22:50:21 -06:00
BsCmOD
819ec462b8
FIX TMC menu message ( #20294 )
2020-11-26 21:25:18 -06:00
Scott Lahteine
b6a32500c4
M808 Repeat Markers ( #20084 )
2020-11-26 21:18:40 -06:00
thinkyhead
c61a311c0d
[cron] Bump distribution date (2020-11-27)
2020-11-27 00:12:12 +00:00
Štěpán Dalecký
5cae4e9f55
[WIP] Fix Probe::offset_xy ( #20290 )
...
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-11-26 13:21:48 -08:00
wmariz
58ac815822
Level Corners with Probe option ( #20241 )
2020-11-26 07:58:19 -06:00
Scott Lahteine
3ba374a29e
Optimize emergency parser check
2020-11-26 03:56:21 -06:00
Scott Lahteine
7ce675e604
No auto debug for EEPROM_CHITCHAT
2020-11-26 03:56:21 -06:00
Scott Lahteine
aa2ced96e0
Finish HAL/STM32 cpp wrappers
2020-11-26 03:47:15 -06:00
mks-viva
8c59212ca4
MKS Robin E3 / E3D v1.1 ( #20216 )
2020-11-26 02:36:29 -06:00
Scott Lahteine
4f4843a845
Tweak some pin errors
2020-11-26 01:08:21 -06:00
Jason Smith
3a396a25dc
Retire HAL for STM32F4 / F7 ( #20153 )
2020-11-26 00:37:18 -06:00
Scott Lahteine
18853defdd
Reduce warnings, extern "C" cleanup ( #20279 )
2020-11-25 21:40:56 -06:00
swissnorp
649965ae32
Probe Offset Wizard improvements ( #20239 )
2020-11-25 21:38:00 -06:00
thinkyhead
afe5027a39
[cron] Bump distribution date (2020-11-26)
2020-11-26 00:11:33 +00:00
Victor Oliveira
04c4c6004e
Fix COLOR_UI without TOUCH_SCREEN_CALIBRATION ( #20269 )
2020-11-24 21:39:49 -08:00
Victor Oliveira
2693e35cae
add missing header to use HAS_SD_HOST_DRIVE ( #20270 )
2020-11-24 20:08:35 -08:00
Scott Lahteine
e38abef720
Update TOUCH_UI_LULZBOT_BIO wrappers
2020-11-24 18:32:01 -06:00
thinkyhead
0eae28a663
[cron] Bump distribution date (2020-11-25)
2020-11-25 00:11:42 +00:00
Scott Lahteine
b28b2ca266
Cosmetic G29 ABL tweak
2020-11-24 17:53:39 -06:00
Scott Lahteine
296a2ad7e4
Consistent Probe XY offset type
2020-11-24 17:38:26 -06:00
Jason Smith
e9431b5445
No Z_MULTI_ENDSTOPS when HOMING_Z_WITH_PROBE ( #20254 )
2020-11-24 16:27:59 -06:00
pseudex
4258ff1a68
Allow cold Filament Load/Unload with M302 P1 ( #20262 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-24 16:20:06 -06:00
ellensp
ef12425bef
Set "lcd_move_e" index to fix the label ( #20263 )
2020-11-24 16:14:22 -06:00
rdhoggattjr
62680bb356
LCD position in current units ( #20145 )
2020-11-23 23:02:54 -06:00
thinkyhead
94fea59e9d
[cron] Bump distribution date (2020-11-24)
2020-11-24 00:11:40 +00:00
Jason Smith
a4e1132048
Fix Z4 in ENABLE/DISABLE_AXIS_Z ( #20256 )
...
This was accidentally broken in PR #20218
2020-11-23 03:07:43 -08:00
Jason Smith
58eaad703a
Fix dummy thermistors for Bed, Chamber, Probe ( #20247 )
2020-11-22 18:47:52 -06:00
Scott Lahteine
6f272e13c5
Allow Status Message without LCD ( #20246 )
2020-11-22 18:44:17 -06:00
Jason Smith
9dedd121bf
Fix UBL manual mesh adjust behavior ( #20248 )
2020-11-22 18:20:33 -06:00
thinkyhead
315cb6d001
[cron] Bump distribution date (2020-11-23)
2020-11-23 00:11:32 +00:00
Scott Lahteine
d8a3b9eb3a
Move core conditionals earlier
2020-11-21 22:33:27 -06:00
qwewer0
e19c016c74
Clear menu history for browse media on insert ( #20236 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-11-21 18:21:43 -06:00
thinkyhead
89b56ca5c2
[cron] Bump distribution date (2020-11-22)
2020-11-22 00:12:03 +00:00
Kurt Haenen
ca83e1a26f
Proper pullup/pulldown configurability ( #20242 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-11-21 17:56:56 -06:00
Victor Oliveira
7a04df47f2
Fix Load Filament wait ( #20243 )
2020-11-21 17:16:03 -06:00
Orel
8db72d027e
Skip unnecessary (costly) SW Stepper Enable ( #20218 )
...
Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-11-21 16:27:06 -06:00
Gurmeet Athwal
6851909f90
BTN_ENC_EN for many boards ( #19890 )
...
Enables CHECK_ENCODER_ACTIVE_SIGNAL for many more boards.
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-11-20 23:47:04 -08:00
Scott Lahteine
7e902b7e29
Power-Loss cleanup
2020-11-20 21:30:45 -06:00
Simone Primarosa
f8e83f79c5
Superscript substitution ( #20219 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-11-20 20:36:19 -06:00
Simone Primarosa
615bf2a6f1
Fix bad SET_FAST_PWM_FREQ calls ( #20227 )
2020-11-20 19:53:04 -06:00
Kurt Haenen
474be6058b
Fix backward Filament (Presence) Sensor pulls ( #20228 )
...
Co-authored-by: Kurt Haenen <Kurt.Haenen@quintux.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-11-20 19:48:53 -06:00
thinkyhead
fb3f6a46c1
[cron] Bump distribution date (2020-11-21)
2020-11-21 00:11:06 +00:00
Scott Lahteine
b3bd47b4b2
Printrboard labels
2020-11-20 17:41:20 -06:00
Victor Oliveira
28e315cd69
SINGLE_TOUCH_NAVIGATION Follow Up ( #20213 )
2020-11-20 10:46:18 -03:00
Victor Oliveira
0e3d86579b
Missing header to use suicide() on LVGL UI ( #20214 )
2020-11-19 23:09:33 -03:00
Ajtak
a26a21d19a
Longer LK Pro / Alfawise PRO board ( #20185 )
2020-11-19 18:25:27 -06:00
thinkyhead
d8557547dd
[cron] Bump distribution date (2020-11-20)
2020-11-20 00:11:02 +00:00
Orel
fe88fb7ed9
Fix DAC setDrvPct ( #20205 )
2020-11-19 18:08:21 -06:00
Vitaliy
19d0c985be
Windows LPC Upload for non-admins ( #20208 )
...
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-11-19 17:49:12 -06:00
Scott Lahteine
4a0fc4d699
Fix Z label
2020-11-19 17:41:24 -06:00
Scott Lahteine
931df1231a
MKS WiFi strings
2020-11-19 17:38:36 -06:00
Scott Lahteine
b51c6d4737
More MKS WiFi
2020-11-19 17:29:01 -06:00
Scott Lahteine
3893114c86
MKS WiFi preliminary changes
2020-11-19 15:56:04 -06:00
Till
fcc29fc189
Add Thermistor 20-21 notes ( #19246 )
2020-11-19 14:07:47 -06:00
Victor Oliveira
d7aea9608e
Reduce RAM usage for TFT Color UI on SGen-L V2 ( #20209 )
2020-11-19 16:47:49 -03:00
Maciej Rutkowski
4c5a58a5db
Fix GTR NeoPixel pin with FYSETC Mini12864 ( #20203 )
2020-11-19 02:49:44 -08:00
ellensp
c059ea0ea0
Remaining Time followup ( #20199 )
2020-11-19 00:09:51 -06:00
Victor Oliveira
6a8ac21f80
Fix Filament Change menu item labels ( #20201 )
2020-11-19 00:05:05 -06:00
Victor Oliveira
08c5557026
Abort print on media removal ( #20200 )
2020-11-18 23:32:33 -06:00
JoAnn Manges
cb2ec628df
Use RTD for MAX31865 reading ( #20188 )
2020-11-18 23:12:03 -06:00
bosd
acdfbbeb86
Fix broken #include ( #20193 )
2020-11-18 19:32:52 -06:00
thinkyhead
8b72cbebde
[cron] Bump distribution date (2020-11-19)
2020-11-19 00:10:51 +00:00
Giuliano Zaro
41529b6598
SMUFF (MMU2 clone) support ( #19912 )
2020-11-18 01:27:21 -06:00
Scott Lahteine
11b811820f
USB Media Host followup
...
Restore HAS_SHARED_MEDIA
2020-11-18 00:13:28 -06:00
Jason Smith
39305aa47c
Use MANUAL_PROBE_START_Z for UBL manual probing ( #20160 )
2020-11-17 23:59:48 -06:00
Philippe Cayrol
caeac3851a
Better edit range for Linear Advance K ( #20155 )
2020-11-17 23:56:51 -06:00
Thomas Niccolo Reyes
04a3ece3e0
Remaining Time for Prusa-style LCD layout ( #20148 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-17 23:49:56 -06:00
Victor Oliveira
f1cdd02d4c
Improve USB Media Host conditions ( #20176 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-17 23:48:14 -06:00
Foxies
c1920f31ca
FLSun Hispeedv1 Board update ( #19959 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-17 22:32:34 -06:00
Thomas Niccolo Reyes
ecd8227de0
Open File Browser on Media Insert (option) ( #20151 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-17 22:30:32 -06:00
wmariz
5768ee0f9e
Probe Wizard XY position ( #20167 )
2020-11-17 21:54:21 -06:00
Jason Smith
50a77ef7f0
Fix NAN mesh entries with ABL_BILINEAR_SUBDIVISION ( #20143 )
2020-11-17 19:11:13 -08:00
Victor Oliveira
75924edcf8
COLOR_UI without TOUCH_SCREEN 👍🏻 ( #20178 )
2020-11-17 20:07:34 -06:00
Victor Oliveira
26ac992242
Prevent #div0 error ( #20183 )
2020-11-17 18:44:53 -06:00
thinkyhead
8c4a06d855
[cron] Bump distribution date (2020-11-18)
2020-11-18 00:10:44 +00:00
Victor Oliveira
51a1561ae9
Reduce RAM usage for TFT Color UI on SGen-L ( #20179 )
2020-11-17 12:32:30 -08:00
Roman Moravčík
a15ab85557
Update Slovak language ( #20181 )
2020-11-17 12:30:06 -08:00
石立枫
9b2e810bdf
Add FLY_CDY board ( #19979 )
...
Co-authored-by: FLYmaker <FLYmaker@users.noreply.github.com>
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-11-17 03:35:02 -08:00
Victor Oliveira
7930fd9ce8
Use intptr types (simulator) ( #20142 )
2020-11-17 00:45:01 -08:00
Jason Smith
9767e59e6c
Allow overriding servo pin for MKS Robin Mini ( #20158 )
2020-11-17 00:40:37 -08:00
Keith Bennett
c12e6933f5
Multi-Hotend Preheat Fixes ( #20165 )
...
* Return to Status Screen on Multi-Hotend Preheat All
Co-authored-by: Victor Oliveira <81722+rhapsodv@users.noreply.github.com>
2020-11-17 00:37:37 -08:00
thinkyhead
59d2871b59
[cron] Bump distribution date (2020-11-17)
2020-11-17 00:10:50 +00:00
Jason Smith
4dd2496530
Allow dummy thermistors without pin definitions ( #20159 )
2020-11-16 14:56:59 -06:00
FanDjango
110e0d782f
Guards for large BLOCK_BUFFER_SIZE (>=128) ( #20130 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-16 14:56:05 -06:00
InsanityAutomation
e955dce3dc
Update IDEX menus, add post-M605 event G-code ( #20133 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-15 23:56:05 -06:00
thinkyhead
101d57d093
[cron] Bump distribution date (2020-11-16)
2020-11-16 00:11:06 +00:00
Victor Oliveira
ea371618da
Add Touch Calibration screen ( #20049 )
2020-11-15 16:39:58 -06:00
Scott Lahteine
cab83ba840
Fix some LCD/serial strings
2020-11-14 18:28:39 -06:00
thinkyhead
8d20a83e09
[cron] Bump distribution date (2020-11-15)
2020-11-15 00:12:28 +00:00
Scott Lahteine
c5e411f492
Add parser.is_command(letter, code)
2020-11-14 18:09:17 -06:00
Minims
189306d24e
BTT Motor Expansion for SKR Pro ( #20123 )
2020-11-13 20:13:36 -06:00
Keith Bennett
f9e54331ba
UTF Filenames followup ( #20135 )
2020-11-13 20:10:50 -06:00
phcay
a97a1ae218
Fix extraneous Linear Advance DIR change ( #20131 )
2020-11-13 20:06:37 -06:00
Luu Lac
a6ff61d52e
Fix "autotune" LCD message ( #20127 )
2020-11-13 20:06:37 -06:00
Scott Lahteine
c710b6e06c
Optimize M360
2020-11-13 20:06:37 -06:00
Scott Lahteine
1d43e81be0
Fix compile warnings, serial alias
2020-11-13 18:28:15 -06:00
Scott Lahteine
988fc202e2
LCD_FIRST_TOOL status bitmaps
2020-11-13 18:23:18 -06:00
thinkyhead
6aea00289c
[cron] Bump distribution date (2020-11-14)
2020-11-14 00:10:15 +00:00
Gonçalo Pereira
fbc2d2d726
Typo in MMU2 serial protocol description ( #19949 )
2020-11-13 01:23:05 -06:00
InsanityAutomation
1b0a5abd73
G34 Z stepper locking ( #20091 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-12 22:54:18 -06:00
LinFor
99c377b4e4
Fix UTF filename scroll ( #20121 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-12 22:49:19 -06:00
Jason Smith
288eb06708
UTF longname followup ( #20115 )
2020-11-12 22:26:49 -06:00
thinkyhead
eb3d6a5333
[cron] Bump distribution date (2020-11-13)
2020-11-13 00:10:25 +00:00
thinkyhead
37b56e09a3
[cron] Bump distribution date (2020-11-12)
2020-11-12 00:10:01 +00:00
Scott Lahteine
0cccc60409
Terse sanity messages
2020-11-11 16:58:54 -06:00
Scott Lahteine
2282801172
Add HOME_Z_FIRST option ( #20113 )
2020-11-11 16:58:34 -06:00
LinFor
f4e9f3654e
Fix MAX6675 SPI init, conflicts ( #20086 )
2020-11-11 16:27:45 -06:00
JoAnn Manges
40d442fde2
Fix MAX31865 on SPI (PT100/1000) support ( #20074 )
2020-11-11 15:52:35 -06:00
Hebezo
6ccb4b93b1
Option to ignore SD at startup ( #20099 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-11 15:16:19 -06:00
Scott Lahteine
ddc23c6224
M32 followup
2020-11-11 14:39:39 -06:00
ellensp
7216b8f804
Fix compile with PLR, no fan ( #20096 )
2020-11-11 14:35:13 -06:00
Davidsg33k
bd6e60f56d
400 Z steps-per-mm ( #20104 )
2020-11-11 14:30:36 -06:00
LinFor
5b9aeb2e5f
Handle UTF in long filenames ( #20087 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-11 14:14:39 -06:00
Costas Basdekis
0465e0ae3a
Distinct runout states ( #19965 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-11 00:39:23 -06:00
Costas Basdekis
3b68e44d9a
Fix Linux GPIO logging ( #20093 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-10 20:13:29 -06:00
ellensp
d4ba94479b
BTT driver expansion for SKR 1.3/1.4 ( #20088 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-10 20:06:42 -06:00
Speaka
87ce545e15
Tramming Wizard wait position ( #20063 )
2020-11-10 19:41:21 -06:00
Victor Oliveira
f8ee6f8b31
Fix UI compile issues ( #20092 )
2020-11-10 19:39:34 -06:00
thinkyhead
f15fef90a9
[cron] Bump distribution date (2020-11-11)
2020-11-11 00:09:42 +00:00
Jason Smith
53e79224fc
Fix Arduino DUE compilation ( #20058 )
2020-11-10 03:32:08 -06:00
qwewer0
2abb674c87
What if 8 was 9? ( #20076 )
2020-11-10 03:27:34 -06:00
Gustavo Alvarez
6ce1eeb4ae
Fix SKR E3 DIP pin CLCD_SPI_CS ( #20078 )
2020-11-10 03:22:08 -06:00
Tanguy Pruvot
a70fdfaeba
Fix 320x240 touch buttons Y ( #20079 )
2020-11-10 03:21:05 -06:00
Scott Lahteine
f17394d677
Ability to disable M32
2020-11-10 02:21:12 -06:00
thinkyhead
12ba2ad77e
[cron] Bump distribution date (2020-11-10)
2020-11-10 00:11:19 +00:00
Scott Lahteine
59eca253e1
Simplified temp sensor conditionals
2020-11-09 01:17:37 -06:00
Hebezo
4ace02f4c2
Add POWER_OFF_DELAY option ( #19987 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-08 18:37:41 -06:00
qwewer0
c753d2b7f4
Use extra G35 BLTouch HS Mode clearance in Tramming Wizard ( #20057 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-08 18:31:14 -06:00
thinkyhead
d5fdc75c82
[cron] Bump distribution date (2020-11-09)
2020-11-09 00:11:21 +00:00
Alexander D. Kanevskiy
3c318d0dc7
POWER_LOSS_PIN for BTT SKR mini MZ / E3 2.0 ( #20069 )
2020-11-08 02:20:07 -06:00
Jason Smith
5013fdaf79
Fix tool-change servo index for E2 and up ( #20060 )
2020-11-08 02:15:30 -06:00
Scott Lahteine
06bf3ccfb7
Add alternative TERN macros
2020-11-07 22:19:25 -06:00
Scott Lahteine
dcb0f5dc3b
Temperature 'autostart' => 'auto_job'
2020-11-07 21:21:19 -06:00
Scott Lahteine
18fb4b1ce1
MSG_AUTOSTART => MSG_RUN_AUTO_FILES
2020-11-07 21:21:19 -06:00
thinkyhead
45116128e8
[cron] Bump distribution date (2020-11-08)
2020-11-08 00:11:23 +00:00
Albert van Osch
7beebcd315
Zonestar Z8 XM2 support ( #19991 )
2020-11-07 16:59:19 -06:00
Scott Lahteine
883347bc11
Apply some pins formatting
2020-11-07 16:54:20 -06:00
Scott Lahteine
b5ef699523
TFT cleanup
2020-11-07 16:21:52 -06:00
LinFor
2da25d67e1
Fix Endstop Interrupts with SPI endstops, sanity checks ( #20051 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-07 03:37:45 -06:00
Speaka
6954772ece
Tramming Wizard submenu option ( #20000 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-07 03:20:27 -06:00
Victor Oliveira
2fdeceda58
Color UI single touch menu navigation ( #20053 )
2020-11-07 03:00:29 -06:00
Darren Horrocks
53cc8a0d6e
Optimized (non-optiboot) Melzi env ( #20021 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-07 02:43:51 -06:00
Darren Horrocks
10fd9ed896
Anet 1.0 alternative graphical LCD wiring ( #20022 )
2020-11-07 02:42:14 -06:00
Jason Smith
a439892d7a
Sanity-check illegal native USB ( #20047 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-07 00:48:17 -06:00
Jason Smith
bd872d5dcf
STM32F1 cleanup, incl. SoftwareSerial removal ( #20046 )
2020-11-06 23:51:52 -06:00
Jason Smith
bdfedf249a
Fix FYSETC S6 timer conflict ( #20044 )
2020-11-06 23:49:53 -06:00
George Fu
4785b04aa1
FYSETC E4 board support ( #20032 )
2020-11-06 23:48:52 -06:00
Scott Lahteine
8c052e43f1
Update some file headers
2020-11-06 23:46:56 -06:00
Victor Oliveira
85d094bbb4
Standardize Marlin SPI (part 1) ( #19989 )
2020-11-06 21:07:15 -06:00
Scott Lahteine
97d7af7a23
Use nullptr
2020-11-06 20:17:05 -06:00
Mauro
0a64f197d9
Fix E4d@box pins, stepper i2s ( #20055 )
2020-11-06 19:28:41 -06:00
Scott Lahteine
af75e24c2e
Clean up corrected urls
2020-11-06 19:11:29 -06:00
thinkyhead
78e10d346a
[cron] Bump distribution date (2020-11-07)
2020-11-07 00:10:42 +00:00
Marc Jovaní González
c574bcce88
Add Spanish translations ( #20020 )
2020-11-05 18:16:08 -06:00
Jason Smith
ce90447531
Fix 0 extruders & bed compile ( #20030 )
2020-11-05 18:15:29 -06:00
Sergey1560
f924344cc5
Don't close diveDir in fileExists ( #20035 )
2020-11-05 18:13:21 -06:00
thinkyhead
323b3a63d6
[cron] Bump distribution date (2020-11-06)
2020-11-06 00:10:33 +00:00
Scott Lahteine
1f6612dfc4
Comment, spacing cleanup
2020-11-05 17:16:47 -06:00
Josh Schroeder
c43ca39ec2
Wiring warning for ANET_FULL_GRAPHICS_LCD on SKR 1.4 ( #20011 )
2020-11-04 21:15:25 -06:00
thinkyhead
0407828027
[cron] Bump distribution date (2020-11-05)
2020-11-05 00:10:28 +00:00
Victor
a1cce36c1e
FAST_PWM for STM32 ( #20025 )
2020-11-04 15:15:19 -06:00
Scott Lahteine
4fe1adc383
HAL support for 8s watchdog
2020-11-04 15:08:40 -06:00
thinkyhead
2a78fe0f81
[cron] Bump distribution date (2020-11-04)
2020-11-04 00:09:52 +00:00
Keith Bennett
ea5886c77d
Add note about TMC2225/6 ( #20002 )
2020-11-03 17:27:09 -06:00
Victor Oliveira
e9053654a7
Better Classic UI touch resolution ( #20004 )
2020-11-03 17:25:33 -06:00
Victor Oliveira
0be276482e
Show un-mounted media slot ( #20005 )
2020-11-03 17:21:15 -06:00
Scott Lahteine
7e55cbf798
DWIN cleanup, preserve Z offset
2020-11-03 17:18:05 -06:00
Victor Oliveira
f131f58124
Add a filament runout note ( #19973 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-02 20:22:14 -06:00
thinkyhead
5a4a6285bb
[cron] Bump distribution date (2020-11-03)
2020-11-03 00:09:58 +00:00
Victor Oliveira
e7ebb66200
Fix STM32 HW Serial + EP compile ( #19990 )
2020-11-01 20:38:10 -06:00
Victor Oliveira
5deca5a18f
Increase SPI Speed on LPC. Color and Classic UI for MKS SGEN L. ( #19945 )
2020-11-01 20:15:06 -06:00
thinkyhead
05033bb9d6
[cron] Bump distribution date (2020-11-02)
2020-11-02 00:09:42 +00:00
Alexander D. Kanevskiy
83097657d5
Y-center GLCD status logo, reorganize ( #19954 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-01 17:44:46 -06:00
Victor Oliveira
12e8861a1c
Reset calibration screen touch timer on click ( #19951 )
2020-11-01 04:42:53 -06:00
Scott Lahteine
22bf2b49c6
Clean up SPI and ST7920 defines ( #19956 )
2020-11-01 04:40:59 -06:00
Jason Smith
4a39c8cd53
Get STM32 clock rates from framework ( #19978 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-01 02:39:30 -06:00
thinkyhead
c05beb74a9
[cron] Bump distribution date (2020-11-01)
2020-11-01 00:10:34 +00:00
Alexander Semion
cd89fa141b
Add SPINDLE_SERVO option ( #19971 )
2020-10-31 17:42:05 -05:00
Nick
da60dcbf2e
Fix Chiron probe low point ( #19962 )
2020-10-31 16:54:31 -05:00
Scott Lahteine
368a581de9
Cutter power cleanup
2020-10-31 16:51:42 -05:00
Julien Lirochon
24c5259005
Fix SpindleLaser::cpwr_to_pct() maths ( #19970 )
2020-10-31 16:19:51 -05:00
Scott Lahteine
2110739138
Cutter enable inline at full power
...
Co-Authored-By: Luu Lac <45380455+shitcreek@users.noreply.github.com>
2020-10-31 16:17:48 -05:00
thinkyhead
a4a487b0cc
[cron] Bump distribution date (2020-10-31)
2020-10-31 00:09:17 +00:00
thinkyhead
6071a0835a
Fix bilinear_line_to_destination definition
...
See #19431
2020-10-30 00:18:46 -05:00
Orel
a272c019f9
Rename, adjust Dagoma F5 ( #19947 )
2020-10-29 20:02:29 -05:00
thinkyhead
dde86a4179
[cron] Bump distribution date (2020-10-30)
2020-10-30 00:10:04 +00:00
Scott Lahteine
f8d57370d0
gcode_D EEPROM size, cleanup
...
Fixes #19920
Co-Authored-By: Orel <37673727+0r31@users.noreply.github.com>
2020-10-29 17:34:17 -05:00
Victor
de315c97b1
FAST_PWM for STM32F1 ( #19952 )
2020-10-29 17:17:04 -05:00
Giuliano Zaro
1247f73754
Update Italian language ( #19953 )
2020-10-29 16:27:01 -05:00
Victor Oliveira
50ba20fe1f
PIO env for MKS Nano boards in STM32 ( #19905 )
2020-10-29 02:01:25 -05:00
Marcio Teixeira
b6856dcb99
Improvement and fixes to FTDI touch UI
...
- Fixed incorrect LCD text string
- Fixed incorrect refresh of filament change screens
- Allow host control via touch UI
- Updates to leveling menu
- Modified ExtUI::isPrinting() to check if the job timer is running
- Added ExtUI method to check whether a host print is paused
2020-10-29 01:14:15 -05:00
Scott Lahteine
54ec6a0ce2
Tweak code formatting
2020-10-29 01:14:15 -05:00
Victor Oliveira
dca7c5d1ad
Color UI for MKS SGen-L V2 ( #19919 )
2020-10-29 00:52:50 -05:00
Scott Lahteine
be0c9ff705
Fix comments, spacing
2020-10-29 00:49:18 -05:00
Scott Lahteine
3f644b6275
Add a note about substitution chars
2020-10-29 00:21:41 -05:00
Victor Oliveira
838220e4b3
Keep SPI active on LPC176x ( #19932 )
2020-10-28 23:47:12 -05:00
thinkyhead
21674b2879
[cron] Bump distribution date (2020-10-29)
2020-10-29 00:16:59 +00:00
Alexander Fomichev
12dec2563a
Generalize BTT SKR E3-DIP version ( #19910 )
2020-10-27 21:59:22 -05:00
ellensp
603e4d66ac
AZTEEG X5 mini LED pins ( #19909 )
2020-10-27 21:57:32 -05:00
Gurmeet Athwal
90fcb82a3e
Update ExtUI path in config comment ( #19908 )
2020-10-27 21:55:49 -05:00
Victor Oliveira
94a6844521
Color UI circular task queue ( #19918 )
2020-10-27 21:54:30 -05:00
Jason Smith
bdb3f1ae2f
Fix LCD menus + DAC ( #19907 )
2020-10-27 21:40:12 -05:00
Orel
e3f1f7cd85
Fix DAC-related bugs ( #19921 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-27 21:37:10 -05:00
Lucas Seiki Oshiro
c0b4f4eb47
"Sound: ON/OFF" menu item ( #19901 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-27 20:41:12 -05:00
thinkyhead
68ef3ac675
[cron] Bump distribution date (2020-10-28)
2020-10-28 00:16:40 +00:00
Speaka
2cae26ee35
Fix G35 PROGMEM strings ( #19926 )
2020-10-27 17:25:01 -05:00
Scott Lahteine
82ac8a1e76
Fix Archim 1, add Archim 1&2 tests
2020-10-27 16:21:03 -05:00
Victor Oliveira
c60696dbae
Keep watchdog refreshed in LVGL init ( #19900 )
2020-10-27 15:16:35 -05:00
Victor Oliveira
75b0e3246a
Fix some LVGL bugs ( #19904 )
2020-10-27 15:09:19 -05:00
Marcio Teixeira
a74e82fbae
Fix NO_WORKSPACE_OFFSETS compile
2020-10-27 15:05:30 -05:00
thinkyhead
8cf672104e
[cron] Bump distribution date (2020-10-27)
2020-10-27 00:16:29 +00:00
thinkyhead
8bdde8d7a0
[cron] Bump distribution date (2020-10-26)
2020-10-26 00:16:36 +00:00
Scott Lahteine
c4f3f67537
Followup for BTN_ENC_EN
2020-10-25 04:19:59 -05:00
Scott Lahteine
ec23e37a4a
Clean up comments, USB flash, NULLs
2020-10-25 04:10:00 -05:00
Scott Lahteine
00fbe50bbe
Format Nucleo F767ZI pins
2020-10-25 04:07:15 -05:00
ellensp
2e48d6cf70
Fix PASSWORD compile w/out LCD ( #19888 )
2020-10-25 03:46:21 -05:00
René Pasold
ec04517710
Support Fysetc Mini 12864 + GT2560 A(+) ( #19878 )
2020-10-25 03:43:21 -05:00
Jason Smith
f7cdc05937
Update ZMIB_V2 env names ( #19886 )
2020-10-24 19:44:46 -05:00
Gurmeet Athwal
62ba799d72
Add 'BTN_ENC_EN' for SKR V1.4 with DOGM ( #19796 )
2020-10-24 19:41:52 -05:00
thinkyhead
b6508c4bd1
[cron] Bump distribution date (2020-10-25)
2020-10-25 00:16:51 +00:00
Victor Oliveira
853d01de68
More LVGL UI code reduction ( #19879 )
2020-10-24 17:28:31 -05:00
Nick
311b65b225
Fix Anycubic Chiron "Ready" detection ( #19880 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-24 16:48:29 -05:00
Victor Oliveira
9630c2683c
More MKS UI cleanup, optimization ( #19869 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-23 23:37:45 -05:00
Keith Bennett
f53d5a0872
Fix Chitu V5/V6 FAN2 pins ( #19874 )
2020-10-23 23:29:58 -05:00
Scott Lahteine
5917b5cf5c
Fix warning in gcode_D
2020-10-23 19:25:32 -05:00
thinkyhead
2a6d48bf9e
[cron] Bump distribution date (2020-10-24)
2020-10-24 00:16:09 +00:00
Scott Lahteine
0967c87a8f
Pins post-process header ( #19860 )
2020-10-23 14:52:59 -05:00
Scott Lahteine
0ffee29a11
Case light brightness cleanup ( #19856 )
...
Co-authored-by: Chris <chris@chrisnovoa.com>
2020-10-22 22:31:48 -05:00
Scott Lahteine
c75e98dc84
Shorten a method name
2020-10-22 20:54:11 -05:00
qwewer0
c7f7f2403d
Fix Chopper Timing extra axis defaults ( #19850 )
2020-10-22 20:46:48 -05:00
Scott Lahteine
4533a197d5
Slim down MKS UI code ( #19843 )
2020-10-22 20:22:17 -05:00
thinkyhead
1ed853f5d6
[cron] Bump distribution date (2020-10-23)
2020-10-23 00:16:15 +00:00
George Fu
f83bbce3a3
Fix TMC serial port for FYSETC AIO_II ( #19842 )
2020-10-22 06:29:29 -05:00
ManuelMcLure
4fccb92e07
Configure TMC interpolation per driver ( #19828 )
2020-10-22 06:27:33 -05:00
thinkyhead
ec596315bd
[cron] Bump distribution date (2020-10-22)
2020-10-22 00:16:17 +00:00
Foxies
9aee6674bb
FLSUN Delta QQS-Pro pins ( #19793 )
2020-10-21 19:00:57 -05:00
Scott Lahteine
7d64de646a
Add power-on/off G-code options ( #19837 )
...
Co-authored-by: Chris <chris@chrisnovoa.com>
2020-10-21 15:03:11 -05:00
Keith Bennett
1e4691f02a
BigTreeTech SKR Mini MZ V1 ( #19818 )
2020-10-21 14:14:19 -05:00
TheMichalcinOfficial
cf74248949
Support for Ramps-S v1.2 ( #19815 )
2020-10-21 13:44:55 -05:00
Scott Lahteine
072f996af7
General cleanup, mostly MKS UI ( #19825 )
2020-10-21 12:45:27 -05:00
Scott Lahteine
1f7c085527
ESP32: i2s_init requires I2S_STEPPER_STREAM
2020-10-20 22:36:31 -05:00
uwedamm
a596969049
Fix G2/G3 P<circles> E and Z motion ( #19797 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-20 20:26:07 -05:00
thinkyhead
11badea962
[cron] Bump distribution date (2020-10-21)
2020-10-21 00:16:12 +00:00
Tanguy Pruvot
d04ec15849
Longer3D: LONGER_LK_TFT28 now set by config ( #19817 )
2020-10-20 15:06:06 -05:00
ellensp
69d55cabd4
Handle dependent Stepper Driver defaults later ( #19820 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-20 15:01:46 -05:00
bilsef
9baa944460
Teensy 4.1 Ethernet support ( #19801 )
2020-10-20 14:35:29 -05:00
Scott Lahteine
92767f5513
Misc. cleanup, serial strings
2020-10-19 20:39:36 -05:00
thinkyhead
b320b1a3c2
[cron] Bump distribution date (2020-10-20)
2020-10-19 20:39:36 -05:00
Scott Lahteine
35b9e9b4a5
Tweak a host prompt call
2020-10-19 20:39:36 -05:00
Scott Lahteine
21ce39aa9b
Use PGM serial strings
2020-10-19 04:25:48 -05:00
ellensp
ea80b2c8fc
Ensure A4988 for unspecified driver type ( #19798 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-19 03:16:02 -05:00
Scott Lahteine
f501930728
Document M125 P
2020-10-19 00:38:11 -05:00
thinkyhead
8285953c1b
[cron] Bump distribution date (2020-10-19)
2020-10-19 00:16:11 +00:00
InsanityAutomation
6375829448
Apply home offsets to probing, Z Safe Homing ( #19423 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-18 15:53:12 -05:00
Scott Lahteine
b0f0dc683d
ABM Teensy 3.6 build
2020-10-18 00:20:25 -05:00
Jago Strong-Wright
c2802d35bb
Distinct Chopper Timing settings ( #19781 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-17 22:35:19 -05:00
thinkyhead
2693d0eb27
[cron] Bump distribution date (2020-10-18)
2020-10-18 00:16:03 +00:00
Sten Uusvali
6fed11896b
Fix M503 output for M907 motor current ( #19777 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-17 16:11:22 -05:00
Curtis Jenkins
178721a329
Fix Smoothieboard digipots i2c pin ( #19784 )
2020-10-17 15:05:50 -05:00
Scott Lahteine
263f29a96a
MarlinUI followup
2020-10-16 20:48:59 -05:00
Scott Lahteine
e99f967372
Starting fan followup
2020-10-16 20:38:30 -05:00
Victor Oliveira
313efa33ae
Fix starting fan with bad material preset index ( #19773 )
2020-10-16 20:05:45 -05:00
Scott Lahteine
eaf6777a66
Rename ultralcd => marlinui
2020-10-16 19:55:18 -05:00
Scott Lahteine
0f6fc48f85
touch_ms followup
2020-10-16 19:55:18 -05:00
thinkyhead
1e13a7161a
[cron] Bump distribution date (2020-10-17)
2020-10-17 00:15:41 +00:00
arminth
3ed0b24831
Provide FYSETC F6 13 LCD pins for HD44780 ( #19769 )
2020-10-16 17:07:34 -05:00
Jason Smith
050ba0e0a0
LCD conditionals followup ( #19766 )
2020-10-16 17:04:10 -05:00
nb-rapidia
418b3e5ee2
Fix IDEX layer shift and DIR states ( #19756 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-16 16:59:55 -05:00
Serhiy-K
aa901ac4a2
Fix HAL/STM32 FastIO for analog pins ( #19735 )
2020-10-16 16:21:21 -05:00
Victor Oliveira
0b80841c38
Fix Color UI external_control, wait_for_release ( #19771 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-16 16:19:48 -05:00
Victor Oliveira
e370834c35
Handle M410 in the main task ( #19752 )
2020-10-16 16:11:00 -05:00
Jason Smith
9b9cd698a5
Fix SAMD Serial name macro ( #19765 )
2020-10-16 16:04:51 -05:00
mks-viva
a4b89e67c6
Update MKS SGen-L V2 RGB LED pins ( #19762 )
2020-10-16 02:16:09 -05:00
Jason Smith
7f83231385
Fix NUCLEO_F767ZI build, add tests ( #19746 )
2020-10-16 02:04:55 -05:00
Victor Oliveira
5247bb11f7
Sanity check unsupported EP ( #19745 )
2020-10-16 02:03:45 -05:00
thinkyhead
763544585a
[cron] Bump distribution date (2020-10-16)
2020-10-16 00:15:39 +00:00
Victor Oliveira
8a885dc61b
Fix TOUCH_SCREEN + TFT_LVGL_UI compile ( #19754 )
2020-10-15 18:38:27 -05:00
Victor Oliveira
f74b5a6b9b
Update Probe Offset Wizard for Color UI ( #19742 )
2020-10-15 14:15:11 -05:00
rlojek
72e3238c3f
Fix ADVANCED_PAUSE && !PREVENT_COLD_EXTRUSION ( #19740 )
2020-10-15 13:44:57 -05:00
Peter Hall
f86c6851fc
Default LASER_POWER_INLINE to OFF ( #19727 )
2020-10-15 13:18:43 -05:00
Scott Lahteine
f6ffbe548c
TFT Presets, Generic options, Sanity checks ( #19723 )
2020-10-15 03:00:27 -05:00
thinkyhead
04c27573d6
[cron] Bump distribution date (2020-10-15)
2020-10-15 00:15:10 +00:00
Jason Smith
9a23fb5863
Fix SET_SOFT_ENDSTOP_LOOSE w/out soft endstops ( #19734 )
2020-10-14 13:50:03 -05:00
Jason Smith
90d364fc37
Revert at90usb1286 conditional ( #19733 )
2020-10-14 13:48:46 -05:00
Jason Smith
79d51581ba
Fix digipot compilation ( #19731 )
2020-10-14 13:44:03 -05:00
thinkyhead
87b07d6f2f
[cron] Bump distribution date (2020-10-14)
2020-10-14 00:15:03 +00:00
Keith Bennett
64711e0d56
If needed, home before G34 ( #19713 )
2020-10-13 18:13:25 -05:00
Victor Oliveira
bf33b2f862
Watchdog Refresh for LVGL Asset Load ( #19724 )
2020-10-13 18:12:34 -05:00
Jason Smith
54315252c7
Add NUCLEO-F767ZI dev board ( #19373 )
...
Co-authored-by: Lorenzo Delana <lorenzo.delana@gmail.com>
2020-10-13 18:03:09 -05:00
Scott Lahteine
733eb127e9
Simple bool in soft_endstops_t
2020-10-13 14:55:14 -05:00
Victor Oliveira
2132efa981
TFT followup fixes ( #19710 )
2020-10-13 11:58:50 -05:00
thinkyhead
da79674f84
[cron] Bump distribution date (2020-10-13)
2020-10-13 00:15:19 +00:00
Scott Lahteine
ae36ed3903
Move @section temperature
2020-10-12 18:02:25 -05:00
Victor Oliveira
cc4db8e4a9
Fix UTF8 handling for Color UI ( #19708 )
2020-10-12 18:01:03 -05:00
Keith Bennett
f9f8fd37de
Sanity-check mutually-exclusive G34 features ( #19706 )
2020-10-12 16:52:56 -05:00
Earle F. Philhower, III
193c0a52d9
Add loose soft endstop state, apply to UBL fine-tune ( #19681 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-12 16:48:04 -05:00
Jason Smith
f5139f8bf4
Add D100 Watchdog Test ( #19697 )
2020-10-12 16:39:31 -05:00
Victor Oliveira
c0920bbf6a
TFT Refactoring ( #19192 )
...
* split tft folder in two: tft for color ui; tft_io for shared tft code
* after the files got moved, now the code was moved to the right place
* classic ui using TFT IO init lcd codes
* feature to compile tft_io when enabled
* compiling fix
* lvgl spi tft working with tft io init codes
* there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything
* remove debug
* base for TFT rotation and mirroring API, and ILI9488 support
* ST7796S rotate and mirror support
* ST7789V rotate and mirror support
* ST7735 rotate and mirror support
* ILI9341 rotate and mirror support
* ILI9328 rotate and mirror support
* R61505 rotate and mirror support
* MKS TFT definitions
* more configs for mks tfts
* update config
* naming typo
* to configure the user interface
* ANYCUBIC_TFT35
* tft configs
* support for SSD1963
* tft display types
* updated conditionals lcd; first board fully working with the new code - all 3 ui!
* compatiblity
* changed name
* move classic ui file name
* rename TURN -> ROTATE
* GRAPHICAL_TFT_ROTATE_180 deprecated
* first fsmc board fully working - chitu v5
* mks robin nano v1.2 + tft 35 ok!
* right pin name
* anycubic tft tested in a TRIGORILLA_PRO
* chitu v6
* nano 32 tft orientation
* mks tft43
* mks tft43 rotation
* fixed LONGER LK tft setup
* GRAPHICAL_TFT_UPSCALE defined by the display type
* better offsets defaults
* Update Configuration.h
* Update tft_fsmc.cpp
* Update Conditionals_LCD.h
* Tweak comments
* update nano tests
* Revert "update nano tests"
This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65.
* default tft
* outdated comments
* to not break non-vscode builds
* upscale tft 35
* support tft 180 rotation for color ui
* Each TFT Driver is responsible for its default color mode.
* use auto detect in mks displays, because some of them could be shipped with diferent drivers
* extra s
* unused code
* wrong -1
* missing mirror options
* Smaller regex pattern
* Comment updates
* Clean up old defines
* Apply pins formatting
* GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180
* MKS_ROBIN_TFT_V1_1R
* merge fix
* correct resolution
* auto is default, dont need be there, and it will allow the user to configure it even for named displays
* to not use rotation with MKS_ROBIN_TFT_V1_1R
* i like () in macros
* avoid sleepy commits
* default for st7789 is rgb
* nano follow up
* to allow ili9328 rotation
* default is rgb
* boards merge follow up
* to match bootloader orientation
* HAS_TOUCH_XPT2046 is not hal specific anymore
* lets not forget LPC
* 180 rotation for ili9328 and R61505
* Clean up whitespace
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-12 16:38:07 -05:00
Scott Lahteine
bcf65aa503
Fix screen click reading too often ( #19696 )
...
Co-authored-by: andreibobirica <39415547+andreibobirica@users.noreply.github.com>
2020-10-12 00:59:30 -05:00
Jason Smith
a866a758cc
Allow MAX31865 resistance values configuration ( #19695 )
2020-10-12 00:40:39 -05:00
InsanityAutomation
e7838c5f79
G34 Mechanical Gantry Calibration (like Prusa M915) ( #18972 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-11 21:34:27 -05:00
qwewer0
f21b91f1a7
Add REPORT_TRAMMING_MM option ( #19682 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-11 21:30:18 -05:00
Jason Smith
edda32e6b4
Fix motion compile w/out probe-oriented settings ( #19684 )
2020-10-11 19:42:50 -05:00
Victor Oliveira
639b0b8f50
Option to prevent (extra) Watchdog init on STM32 ( #19693 )
2020-10-11 19:31:21 -05:00
Victor Oliveira
18dd0d00a6
Implement wait_for_user for Color UI ( #19694 )
2020-10-11 19:26:16 -05:00
Jason Smith
24fd19259d
Fix I2C_ADDRESS sign warning ( #19685 )
2020-10-11 19:23:23 -05:00