zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
12043 commits 1 branch 0 tags 156 MiB
Commit graph

10214 commits

Author SHA1 Message Date
pinchies 4df9509ead Add support for printers with inverted fan pins (#13362) 
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
 2019-03-10 20:51:21 -05:00
Scott Lahteine 1f7e220387 Make HAL ISR macros function-like 2019-03-10 20:44:27 -05:00
Scott Lahteine e3ce346f24 Report position to host in Nozzle::park 2019-03-10 19:09:28 -05:00
Scott Lahteine 77b4176152 Use lib include for bit_constants.h 2019-03-10 19:09:28 -05:00
Scott Lahteine 3419099f0a Clean up whitespace 2019-03-10 19:09:28 -05:00
pinchies 4c43e6c48b Fix "spontaneous heating" issue (WRITE bug) on STM32 (#13356) 
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
 2019-03-10 17:25:54 -05:00
Michiel Baird b824a517aa Add G38.4 and G38.5 (#13348) 2019-03-10 17:22:09 -05:00
Bruce j Beare e4d080e63c Reset after kill with a button on the KILL_PIN (#13091) 2019-03-10 09:57:38 -05:00
MoellerDi c36989c39e Fix chamber temperature measurement (#13350) 2019-03-10 09:51:13 -05:00
Scott Lahteine 12503fce06 Followup to wait_for_user fix 2019-03-10 09:14:02 -05:00
Scott Lahteine 33a08fc6f7 Fix typos from temperature rework 
Followup to #12201
 2019-03-10 08:28:16 -05:00
Tobias Frost 2efbcc90c5 Fix wait_for_user compile error (#13352) 2019-03-10 08:07:41 -05:00
Tobias Frost 60e82e3929 Send notifications to ExtUI for M0/M1 (#13344) 
- Send notifications to ExtUI for M0/M1

- wait_for_user can be non-volatile (not changed by interrupt)
  C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
 2019-03-09 14:20:37 -06:00
Marcio Teixeira 00fc43144a Follow up fixes to various PRs. (#13334) 
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
  `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)
 2019-03-09 14:20:37 -06:00
Scott Lahteine c7d618b4d9 Fix SERIAL_ECHOLNPAIR 
Fix #13333
 2019-03-09 14:20:37 -06:00
InsanityAutomation d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
Msq001 fb3302feda Fix STM32F1 Serial and ADC pins (#13331) 2019-03-08 02:21:32 -06:00
Reece Kibble dbead66988 Allows user to set (almost) any PWM frequency (#12638) 2019-03-08 02:15:42 -06:00
Tobias Frost afbec5ff7e Have ExtUI::getProgress use ui.get_progress (#13328) 2019-03-07 18:00:38 -06:00
3dlabsio 645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine 44571775bd Further support for 6 extruders 2019-03-07 01:00:56 -06:00
Scott Lahteine 893ee68b52 Clean up trailing whitespace 2019-03-06 01:02:43 -06:00
Scott Lahteine 39f1222060 One fewer G29 error string 2019-03-05 23:04:52 -06:00
Scott Lahteine cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311) 2019-03-05 06:46:19 -06:00
Scott Lahteine 4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items (#13294) 2019-03-05 06:46:06 -06:00
Tobias Frost 56fdcf93d1 Disallow SD_DETECT_INVERTED with FYSETC F6. (#13307) 2019-03-05 06:45:28 -06:00
Tobias Frost 7ce13a6ec1 Fix a print_job_timer compile error (#13304) 2019-03-05 06:39:15 -06:00
Tobias Frost 6df51201ae Include EXTENSIBLE_UI in single LCD sanity check (#13306) 2019-03-05 06:33:36 -06:00
Scott Lahteine 2e5a3b01fd Save Power Loss Recovery only on move commands 2019-03-05 02:43:29 -06:00
Scott Lahteine 15738ea506 Update a motion comment 2019-03-05 00:50:29 -06:00
Scott Lahteine bc87e97357 Prevent a tool change move out of bounds 2019-03-05 00:50:29 -06:00
Scott Lahteine 2212da453a
Distinguish between analog/digital auto fans (#13298) 2019-03-05 00:41:31 -06:00
Chris Pepper 2513f6b550
Fix multiport G28 with Binary Transfer (#13308) 2019-03-04 16:44:54 +00:00
Chris Pepper 38bef9da91 Report auto temp to both serial ports, if available (#13301) 2019-03-03 21:03:48 -06:00
Robert Mendon 367d392880 Init stepper current after stepper pins are set up (#13302) 2019-03-03 20:58:02 -06:00
InsanityAutomation bf8b38e0f7 Relocate configs above Marlin/src folder (#13299) 2019-03-03 16:50:56 -06:00
Scott Lahteine d71dc5cf42 Fix for Ender 4 fan/case light pin 
See #12731
 2019-03-03 07:43:27 -06:00
Anthony Rich 7640b328df Support for Tronxy X5S 2e (#13297) 2019-03-03 07:41:05 -06:00
Scott Lahteine 599cdc3f0f Remove dead code from get_pid_output 
See #12981
 2019-03-03 05:45:20 -06:00
Scott Lahteine 35ae5daf2d Split up sdcard G-codes 2019-03-03 01:52:15 -06:00
Scott Lahteine 3f36a38512 Clean up some pre-serial-redirect includes 2019-03-03 01:52:15 -06:00
Scott Lahteine fa0d909dd3 Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3 
See #13267
 2019-03-03 00:27:47 -06:00
Ludy bd4160dbaf Unused CS_ACTUAL_sb (#13282) 2019-03-02 17:30:30 -06:00
Vasily Evseenko 71773b128d Fix stepper use before init. Add Ultimaker2+ Extended clone config (#13284) 2019-03-02 17:29:02 -06:00
Scott Lahteine edc4e037c4 Add a note to G10 2019-03-02 17:19:36 -06:00
Tobias Frost 57afd0ab37 Fix range check bug in FileList::seek() (#13286) 
When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.
 2019-03-02 16:43:08 -06:00
kAdonis 05c2f80826 Fix bug in wait-for-heatup (#13290) 2019-03-02 16:29:10 -06:00
Chris Pepper b0553d2d97 Add M997 support and simple implementation for LPC176x (#13281) 2019-03-01 20:11:50 -06:00
Scott Lahteine fa236e9718 General cleanup ahead of L64XX 2019-03-01 19:58:07 -06:00
Scott Lahteine 2f1e1dcb42 Gradual step towards EXTRUDERS 0 support 2019-03-01 01:51:24 -06:00
Scott Lahteine 99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
Scott Lahteine 9a6b90f47d TMC2660.h comment tweaks 2019-03-01 00:25:22 -06:00
Scott Lahteine a2e3226597 Init XYZ to configured home position 2019-02-28 22:10:26 -06:00
Scott Lahteine 4fbbce9a35 Marlin Dev Mode for DOGM status screen 2019-02-28 22:10:26 -06:00
Scott Lahteine 998ce55be0 Alternative fan bitmap 2019-02-28 22:08:20 -06:00
InsanityAutomation e2e2a55d9b Add thermistor type 67 SliceEng (#13275) 2019-02-28 19:44:17 -06:00
Msq001 5b7ad3a5a0 Fix SKR onboard TF card CS pin (#13272) 2019-02-28 19:41:19 -06:00
Scott Lahteine 7fde3ed915 Skip hysteresis check when temp is already close to target 
To eliminate a long delay during pause, park, and filament change
 2019-02-28 14:35:19 -06:00
Chris Pepper 7de6476b3d
Fix binary protocol error 2019-02-28 02:31:42 +00:00
Scott Lahteine 2c10222e87 card.transfer_port => transfer_port_index 2019-02-27 20:14:17 -06:00
Chris Pepper 4ab433d391 Fix binary protocol with one serial port (#13270) 
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
 2019-02-27 19:57:48 -06:00
InsanityAutomation eb4bf93ea4 Add more Babystep options (#13262) 2019-02-27 04:38:56 -06:00
Scott Lahteine f37df28d17 UBL G29 T current position fix 
Counterpart to #12845
 2019-02-26 22:25:53 -06:00
Msq001 f8a39919fa Add Bigtree SKR 1.3 board (#13267) 
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
 2019-02-26 21:30:00 -06:00
Bob Kuhn ddbe4cfa20 Printrboard G2 support (#13116) 2019-02-26 21:03:13 -06:00
Scott Lahteine 4200f9ed62 Hide freeMemory et.al. warnings 2019-02-26 18:03:00 -06:00
Scott Lahteine dc88747770 Fix Due GET_ARRAY_IS_DIGITAL 
Co-Authored-By: bob-the-kuhn <bob.kuhn@att.net>
 2019-02-26 17:49:14 -06:00
Scott Lahteine a79b9bbe6b Cleanup whitespace, add a const 2019-02-26 17:49:14 -06:00
Giuliano Zaro 2616e4d4d9 Remove duplicated 'chitchat' defines (#13258) 2019-02-25 16:13:01 -06:00
Scott Lahteine 5d28575d4d Clean up some motion code 2019-02-25 16:01:42 -06:00
Scott Lahteine 808b076000 Update some ABL/UBL conditionals 2019-02-25 16:01:42 -06:00
Scott Lahteine 833c2e54a1 Add an empty flushTX to MarlinSerialUSB_Due 2019-02-25 13:48:14 -06:00
Scott Lahteine 38363902c7 Fix sanity checks for distinct E factor settings 
Reference #13156
 2019-02-25 00:20:36 -06:00
Scott Lahteine 64253e1a58 Followup to serial reform 
Reference #13250
 2019-02-25 00:20:36 -06:00
Minims 92a4984066 Fix G34 probe position (#13251) 2019-02-24 13:57:30 -06:00
Scott Lahteine e15354e387
Simplify serial port redirect (#13234) 2019-02-23 22:53:01 -06:00
Chris Pepper 88cc1d1a31
Fix Preprocessor syntax in Re-ARM pins file (#13247) 2019-02-24 01:36:58 +00:00
Karl Andersson 76e9ee33aa Fix include order to make SERIAL_PORT_2 work (#13241) 2019-02-23 16:56:09 -06:00
Bruce j Beare 562f2321d2 Fix a G34 bug, allow negative Z corrections (#13240) 2019-02-23 02:41:52 -06:00
FernandoVelcic edf025ed8d Update Spanish language (#13236) 2019-02-23 00:41:02 -06:00
Scott Lahteine 02fec89a0d Turn fans off in zero_fan_speeds 
Addressing #13231
 2019-02-22 21:00:44 -06:00
Scott Lahteine 15aa932aa6
HAL for Linux (#13146) 2019-02-22 19:09:10 -06:00
kwalters3 5eb82ca6a8 Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C (#13223) 2019-02-22 19:08:36 -06:00
Marcio Teixeira 109e67169c Define G21 as NOOP w/o INCH_MODE_SUPPORT (#13229) 
Ticket #13228

If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.
 2019-02-22 15:35:32 -06:00
AnHardt 31b0be74af Fix autotemp_factor menu setting (#13226) 
Fix #12643
Only factors above 1 can have a 'positive' effect.
 2019-02-22 15:30:17 -06:00
Evgeny-SPB f6ab62bc13 Fix Creality CR-10 S5 filament change (#13219) 2019-02-21 05:40:49 -06:00
Thomas Moore 9f5e4e5ad8 Update LPC1769 Pins Files (#13183) 2019-02-21 00:54:05 -06:00
Greg Nutt 608a6810e7 Fix DOGLCD_A0 pin in pins_Smoothieboard.h (#13217) 2019-02-20 18:08:49 -06:00
Scott Lahteine 80359c9937 Add more parameters to M240 
Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>
 2019-02-20 14:51:36 -06:00
Scott Lahteine a43e892fb5 Use 8-bit i2c address on LPC platform 
Fix #9799 — hopefully not a unicorn
 2019-02-20 06:27:26 -06:00
Scott Lahteine 631d867dc9 HAL cleanups 2019-02-20 06:27:26 -06:00
Scott Lahteine 89bbc30a09 Fix init of power supply pin 
Fix #13184
 2019-02-20 05:29:05 -06:00
Scott Lahteine 44c22e3935 Provide a default MAX6675_SS_PIN for ReARM 
See #8010
 2019-02-20 05:06:06 -06:00
Scott Lahteine 3c9a7926c2 Fix compile error with JUNCTION_DEVIATION 
See #13000
 2019-02-20 04:54:26 -06:00
Scott Lahteine 758c6c9464 Very minor SPI speedup 2019-02-20 04:36:23 -06:00
Scott Lahteine 422dd6666e Fix Due EEPROM write bug 
See #13065
 2019-02-20 04:36:23 -06:00
Scott Lahteine 03e109c4a3 FLASH_EEPROM => FLASH_EEPROM_EMULATION 2019-02-20 04:36:23 -06:00
Scott Lahteine 50917ccda6 Tweak some u8g interface code 2019-02-20 04:26:34 -06:00
LinFor ba39186364 TMC_DEBUG optimization and improvements (#13135) 2019-02-20 02:22:42 -06:00
Scott Lahteine 1424b368cf Tweak M122 comment in configs 2019-02-19 16:20:18 -06:00
Scott Lahteine 3a1b6fe8c1 Coding standards 2019-02-19 14:58:39 -06:00
InsanityAutomation 19af90face Fix a host action compile error (#13208) 2019-02-19 14:47:31 -06:00
Marcio Teixeira 992cdc8d14 Fix host action / G-code ordering in event_probe_failure (#13207) 
Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.
 2019-02-19 14:45:03 -06:00
InsanityAutomation 33a6d52965 Fix a RAPTOR2 pin conflict (#13205) 2019-02-19 14:42:02 -06:00
InsanityAutomation 52665f54ad Fix bad Purge More logic (#13193) 2019-02-19 14:37:18 -06:00
Scott Lahteine 18458ec42b Error in Smoothieboard for unsupported display 2019-02-19 14:17:33 -06:00
InsanityAutomation d4ed9b3ef1 Babystep also requires homing (#13191) 2019-02-17 14:35:45 -06:00
InsanityAutomation ca7b2f574f Fix condition on tool change filament swap menu (#13190) 2019-02-17 12:33:46 -06:00
Roman Moravčík 208ab8b366 Fix compilation with one service interval (#13185) 2019-02-17 12:32:47 -06:00
Roman Moravčík 567d03a269 Update Slovak language (#13187) 2019-02-17 12:29:49 -06:00
Alain Martel 27203c62b8 Enable M240, set photo pins for 3DFabXYZ i3 (#13174) 2019-02-15 21:16:39 -06:00
Evgeny-SPB 3025ddf179 Support for Creality CR-10 5S (#13173) 2019-02-15 21:09:44 -06:00
Scott Lahteine e00aad84af Add M240 parameters D I J R S 2019-02-14 20:00:40 -06:00
Marcio Teixeira 31c240a8db Enhancements to G425 (#13159) 
- Turn off bed leveling prior to calibrating.
    - This prevents lateral probes from having a Z component that
      triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
    - Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
    - Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
    - Not necessary to disable global endstops
 2019-02-14 16:45:31 -06:00
Andy Shaw 84fc400aba Update BIQU SKR V1.1 pins, add TMC2130 settings (#13166) 
* Remove untested displays add TMC2130 configs.
* Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.
 2019-02-14 16:43:56 -06:00
Scott Lahteine ab2816c870 Patch for M240 2019-02-14 15:13:57 -06:00
Scott Lahteine d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 2019-02-14 15:09:35 -06:00
Scott Lahteine be9a409980 Fix M125 XY parameters, export get_homing_bump_feedrate 2019-02-14 05:25:46 -06:00
Scott Lahteine ce40c2e87c Use do_blocking_move_to(ref, fr) 2019-02-14 02:22:08 -06:00
Giuliano Zaro bdc2f10b90 Update Italian language, fix unused var warning (#13164) 2019-02-13 21:05:18 -06:00
Marcio Teixeira 9f0e1834ec Followup to #13039 (#13163) 
- Fix compile error when accessing `process_subcommands_now_P`.
- Use `const` var eliminating double-negative (to make code more understandable).
 2019-02-13 20:39:38 -06:00
Ludy 1ace97e946 [2.0.x] Update German language (#13150) 2019-02-13 20:31:50 -06:00
Scott Lahteine 7cf9b93f26 Add HAS_FILAMENT_SENSOR ahead of 12962 2019-02-12 20:13:20 -06:00
Giuliano Zaro 2c8d12d3ec Update Italian language (#13148) 2019-02-12 18:40:34 -06:00
Scott Lahteine c2b90c44e4 Prettify some code comments 2019-02-12 17:43:37 -06:00
Scott Lahteine a0dadc8c62 Smaller I2CPositionEncoder strings 2019-02-12 16:21:56 -06:00
Scott Lahteine 18996d2595 Fix some spelling 2019-02-12 16:21:56 -06:00
revilor e56c13670d Service interval watchdog (#13105) 2019-02-12 15:58:56 -06:00
InsanityAutomation 7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine 0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine 894f5c24a8 Fix trailing whitespace 2019-02-12 14:25:57 -06:00
Roman Moravčík bace52afd7 Fixed compilation with MMU2_MENUS disabled (#13140) 2019-02-12 12:55:49 -06:00
Ludy 584f9cd449 Update German language (#13137) 2019-02-12 12:54:57 -06:00
Scott Lahteine d9a3fea022 Comments in HAL_spi_STM32F1.cpp 2019-02-11 18:06:33 -06:00
Giuliano Zaro 773fa5c40f Fix define used when PID is off (#13119) 
Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.
 2019-02-11 17:29:17 -06:00
Giuliano Zaro f7efe6f6c5 [2.0.x] Fix TEMP_STAT_LED startup init (#13120) 2019-02-11 17:27:59 -06:00
Ludy 2bd6ce4b62 Update German language (#13125) 2019-02-11 17:08:21 -06:00
Giuliano Zaro 27115ff7eb Update Italian language (#13123) 
Incomplete.
 2019-02-11 17:07:21 -06:00
Roman Moravčík 08a8bd10ca Updated Slovak translation (#13122) 2019-02-11 17:06:10 -06:00
Scott Lahteine 3e2a4c3b26 Show mixer and temperature menus while printing 2019-02-11 16:52:47 -06:00
Scott Lahteine 8d271f20fe
C10mini E steps of 95 
See https://www.patreon.com/posts/creality-cr10-24602624
 2019-02-10 14:23:05 -06:00
Scott Lahteine 9737608f0a Enable gradient when alias is cleared 2019-02-10 06:39:12 -06:00
Simon Jouet 5cd0fa3ce1 Basic GPIO expander using the ESP32 I2S peripheral (#12959) 2019-02-10 05:40:31 -06:00
Scott Lahteine 3983cacbcf No extern needed for func decl 2019-02-10 05:38:27 -06:00
Scott Lahteine 43b29c093b Update pinsDebug_list.h with XY PWM pins 2019-02-10 05:13:05 -06:00
Scott Lahteine 166e567ab8 Fix HAS_MOTOR_CURRENT_PWM 2019-02-10 05:06:46 -06:00
Scott Lahteine 6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
LinFor 7ee35c2611 PID_MENU option to save PROGMEM in LCD menus (#13095) 2019-02-10 04:03:18 -06:00
Ludy 936f982392 Update German Language (#13110) 2019-02-10 03:55:08 -06:00
AnHardt 0e37fe8776 Apply minimum C in M303 (#13113) 
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
 2019-02-10 03:54:45 -06:00
Scott Lahteine 5a316664e5 Update chopper timing 2019-02-10 03:12:20 -06:00
Scott Lahteine fcb16ceb29 Update default config 2019-02-10 00:20:11 -06:00
Alain Martel 9ae7cca5e9 Disable RGB_LED for 3DFabXYZ (#13097) 2019-02-08 15:18:20 -06:00
Scott Lahteine f3b6cb4d34 Clean up, update config comments 2019-02-08 15:13:52 -06:00
Scott Lahteine ae03753ef1 Fix PCA9533 with PRINTER_EVENT_LEDS 2019-02-08 15:13:52 -06:00
Scott Lahteine 95d3f3953a DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL 2019-02-08 14:54:34 -06:00
Scott Lahteine 6ddd81c178
[2.0.x] Update German Language (#13100) 
add MMU2
 2019-02-08 14:25:24 -06:00
Giuliano Zaro 7c9ff322f3 Update Italian language (#13099) 2019-02-08 14:23:37 -06:00
Ludy ce8cb6a5d9 [2.0.x] Update German Language 
add MMU2
 2019-02-07 20:04:34 +01:00
Scott Lahteine f269766408 Put the MMU2 menu with the others 2019-02-06 17:38:46 -06:00
Marcio Teixeira e1604198ff G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050) 2019-02-06 17:20:17 -06:00
Marcio Teixeira 113af46a1b Add ExtUI methods to babystep probe/nozzle offsets (#12590) 2019-02-06 07:16:54 -06:00
InsanityAutomation 413e303ad5 More Advanced Pause options (#12984) 2019-02-06 06:39:42 -06:00
Mark Zachmann 19cf72e057 Support individual solenoid disable with M381 (#13008) 2019-02-06 06:34:53 -06:00
teemuatlut d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Scott Lahteine e1587da228
Clean up HAL_spi_Due.cpp (#13087) 2019-02-06 06:31:31 -06:00
Rolf Werum 524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 2019-02-06 06:30:53 -06:00
Scott Lahteine 1bd9a63049 Add HAS_EXTRA_ENDSTOPS macro 2019-02-06 05:10:05 -06:00
Scott Lahteine 3c49396370
Fix compile error with DUE + MAX6675 (#13086) 2019-02-05 22:56:13 -06:00
Roxy-3D ab6908a513
Fix Probe Offset bug... 2019-02-05 20:30:20 -07:00
revilor 69aaf5d096 MMU2 fixes (#13082) 2019-02-05 20:56:22 -06:00
Scott Lahteine 2f8e89adc3 Remove extraneous ui. prefixes 2019-02-05 19:04:37 -06:00
Scott Lahteine 870757aa17 Tweaks to pins_GT2560_V3.h 2019-02-04 22:52:50 -06:00
Scott Lahteine b96cc30cd0 HAL spacing tweak 2019-02-04 21:51:06 -06:00
Scott Lahteine 9e394139e5 Followup to 90911104 2019-02-04 10:46:52 -06:00
Sam Lane b35a7c2c87 Fixed closed-loop planner stall (#13005) 2019-02-04 07:43:09 -06:00
Ludy 691e925adc Update German language (#13012) 2019-02-04 07:25:07 -06:00
Scott Lahteine 1497fb388a
M29 match logic was reversed (#13013) 
* M29 logic was reversed 

If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"

* Update queue.cpp

* Update queue.cpp
 2019-02-04 07:23:42 -06:00
Scott Lahteine b5fd2fb58b Allow M29 to be processed late 2019-02-04 07:23:02 -06:00
Scott Lahteine c03bac9ad4
Update queue.cpp 2019-02-04 07:17:40 -06:00
Scott Lahteine a49f0205ea
Update queue.cpp 2019-02-04 07:11:08 -06:00
Andy Shaw 9091110460 LPC1768 - Don't change CS pin state (#13015) 2019-02-04 07:08:39 -06:00
Scott Lahteine 10d855cb21 Sanity check USER_GCODE formatting 2019-02-04 06:36:41 -06:00
Scott Lahteine d97bb4c41c Followup to e10943d0 2019-02-04 06:11:31 -06:00
jeffstaley 2f176d6fb8 Flush RX buffer on G-code line errors to prevent hang (#13018) 2019-02-04 06:03:49 -06:00
Scott Lahteine ca73b2f465 Add static assert to catch errors in COPY(a,b) 2019-02-04 05:52:32 -06:00
Nathan df1043516e Fix the delta homing issue (#12974) 2019-02-04 05:25:50 -06:00
Scott Lahteine 4200bd2fc1
Report on M92 with no arguments (#12833) 2019-02-04 05:24:15 -06:00
Scott Lahteine e10943d0d8 Minor tweak to main menu 2019-02-04 04:58:31 -06:00
Scott Lahteine d4d1b28a06 Fix some include paths 2019-02-04 03:57:15 -06:00
Scott Lahteine 0d720a6ff4 Tweak to emergency_parser.h 2019-02-04 03:56:56 -06:00
Scott Lahteine 0a7ea7063f Hide Resume Print when not relevant 2019-02-04 03:02:44 -06:00
Scott Lahteine afe79ba22b Minor code cleanup 2019-02-04 02:23:06 -06:00
Scott Lahteine fdb97a3e9c Add class and macro to save and auto-restore a variable 2019-02-04 02:23:06 -06:00
Scott Lahteine 433518de74 Prevent M420 error from disconnecting OctoPrint 
Just echo the error instead of labeling it `Error:`.
 2019-02-04 01:54:43 -06:00
Marcio Teixeira 5cfc1cdacc Support SWITCHING_NOZZLE with 2 servos (#13054) 2019-02-04 00:19:56 -06:00
Psycho 3c88cac2e9 Velleman Vertex Delta pins (#13072) 2019-02-04 00:15:08 -06:00
Nicolas G 6fb4001b58 Add option to disable fan speed slowing in M303 (#13066) 2019-02-04 00:12:41 -06:00
Scott Lahteine ca1be02bf0 Tweak some pins formatting 2019-02-04 00:06:41 -06:00
Scott Lahteine 38c2ca9281 Clean up trailing whitespace 2019-02-03 23:00:57 -06:00