Scott Lahteine
15f6f53638
Add HAS_HOTEND, etc.
2020-04-20 00:12:22 -05:00
Scott Lahteine
87875e0de8
Fix mixing with "unload all" compile
2020-04-19 02:10:02 -05:00
Scott Lahteine
8ad056013c
Define "resolution" in bits
2020-04-17 22:33:15 -05:00
studiodyne
50fa87f1cf
Proportional Autotemp followup ( #17585 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-04-17 11:19:31 -05:00
George Fu
a794538c54
Homing backoff enhancements
...
- Define homing bump as an array
- Add pre and post homing backoff options
- Consolidate homing config options
2020-04-17 08:52:41 -05:00
XDA-Bam
bbe2cb75ad
More accurate Junction Deviation fast-acos ( #17575 )
2020-04-16 21:51:05 -05:00
studiodyne
9110f756ad
AUTOTEMP default proportions ( #17560 )
2020-04-16 19:03:53 -05:00
Davide Toldo
720795ac7d
More verbose probing error ( #17482 )
2020-04-16 16:22:37 -05:00
InsanityAutomation
6ce0c94d12
Fix bad comparison ( #17470 )
...
* Suggested message change
* Fix Bad Comparison
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-04-13 17:23:54 -05:00
Scott Lahteine
22da1b2b31
Rename some "kill" messages
2020-04-13 14:54:50 -05:00
Scott Lahteine
f090a927f4
Reapply BLTouch deploy/stow patch
...
- Fixes #14328
- Originally #14352
- Reverted in 2580104
2020-04-12 15:16:43 -05:00
Scott Lahteine
7aed32df00
Fix SD_FINISHED_RELEASECOMMAND bug
...
Fixes #17401 bug that was introduced in 8f26c3a
2020-04-11 22:08:37 -05:00
Roxy-3D
07c9dc4142
Make pid_debug_flag match declaration in M303.cpp
...
Get it right this time!
2020-04-11 11:03:04 -05:00
Roxy-3D
a65198882f
Make declaration of PID_debug_flag match M303.cpp
2020-04-11 10:25:19 -05:00
Scott Lahteine
71a4ab3331
Add "Settings Stored" message
2020-04-09 12:31:33 -05:00
studiodyne
a1523d6419
Fix: const needed for operator* ( #17443 )
2020-04-08 15:00:31 -05:00
Scott Lahteine
0e06aaa2bc
Add millis helper macros
2020-04-04 02:48:30 -05:00
InsanityAutomation
bc01d8d023
Toolchange touchup ( #17395 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-04-03 19:17:05 -05:00
Ben
df8b7dfc40
Various Laser / Spindle improvements ( #15335 )
2020-04-02 19:31:08 -05:00
Scott Lahteine
11ce281694
Followup to #17351
2020-04-02 13:32:59 -05:00
Scott Lahteine
62e8c2dd87
Fix up 'system' includes
2020-04-01 23:51:09 -05:00
Scott Lahteine
514afddeb4
Minor code cleanup
2020-04-01 19:48:58 -05:00
Scott Lahteine
7f5dc7b919
More 8 extruders (TMC) support
2020-04-01 19:46:21 -05:00
Simon Jouet
192c7c27b9
Fix extra TMC serial begin calls ( #17351 )
2020-04-01 16:20:38 -05:00
Marcio T
d83ad6f321
Improve / fix FTDI EVE Touch UI ( #17338 )
...
- Fix timeout and debugging string
- Fix check for whether `LCD_TIMEOUT_TO_STATUS` is valid
- Fix incorrect debugging message
- Make capitalization of callbacks consistent.
- Allow Touch UI to use hardware SPI on Einsy boards
- Move print stats to About Printer page.
- More generic about screen with GPL license.
- Add missing handler for power loss event
- Less code duplication on status screen and main/advanced menu; more legible
- Reorganize advanced and main menu to add more features
- Hide home Z button when using Z_SAFE_HOMING
- Fix compilation errors when certain features enabled
- Fix missing labels in UI
- Improve color scheme
- Add new preheat menus
- Fix incorrect rendering of Marlin logo on boot
- Add Level X Axis and Auto calibrate buttons
2020-03-31 14:22:04 -05:00
Scott Lahteine
223aa5cc4e
No unscaled_e_move for CNC
2020-03-29 17:20:26 -05:00
Scott Lahteine
765a9f3471
do_pause_e_move => unscaled_e_move
2020-03-29 16:26:55 -05:00
Scott Lahteine
fc11e72174
Fix extra unskew call
...
Fixes #17264
2020-03-29 16:11:03 -05:00
Scott Lahteine
747b964295
Clean up user-wait, SD completion ( #17315 )
2020-03-28 03:18:53 -05:00
Mathias Rasmussen
8752fbd92c
Store case light brightness in EEPROM ( #17307 )
2020-03-27 17:38:28 -05:00
Giuliano Zaro
129b270628
QSPI EEPROM for SAMD51 ( #17292 )
2020-03-27 17:29:17 -05:00
Scott Lahteine
54a12ee1d6
Tweak eeprom storage type
2020-03-25 21:07:08 -05:00
Scott Lahteine
dd6781217a
motion.cpp: HAS_DIST_MM_ARG
2020-03-25 19:21:48 -05:00
Scott Lahteine
0175189c34
Allow G2_PWM to be slimmer
2020-03-25 19:18:42 -05:00
Scott Lahteine
adb6334ba0
Use "dist" instead of "delta" for clarity
2020-03-25 19:18:42 -05:00
Roxy-3D
1986e1cdf8
Allow PID_DEBUG to be turned on and off ( #17284 )
...
M303 D will now toggle activation of PID_DEBUG output. This allows the debug capability to be built into the firmware, but turned on and off as needed.
2020-03-24 19:38:09 -05:00
rado79
bef9b9b07e
Delay after homing_backoff for CoreXY sensorless homing ( #17273 )
2020-03-23 20:32:36 -05:00
Scott Lahteine
c87d73045b
Fix extra M114 output line
...
Fixes #17255
2020-03-23 18:31:26 -05:00
Erkan Colak
83eec683c9
New Controller Fan options and M710 gcode ( #17149 )
2020-03-18 13:41:12 -05:00
RasmusAaen
c768605bde
Add Copymaster3D board ( #17188 )
2020-03-17 15:25:10 -05:00
InsanityAutomation
775a4294fc
Configurable SLOWDOWN divisor ( #17171 )
2020-03-15 18:29:18 -05:00
Karl Andersson
85187290a7
Fix incorrect type on ubl_storage_slot ( #17170 )
2020-03-15 18:03:10 -05:00
Scott Lahteine
090a90a036
Add EEPROM_BOOT_SILENT option
2020-03-14 19:24:35 -05:00
Scott Lahteine
095a1123c1
Add a global machine state
2020-03-14 19:24:35 -05:00
Scott Lahteine
118bd2f8b2
Apply loop shorthand macros ( #17159 )
2020-03-13 23:18:16 -05:00
Scott Lahteine
6bead0c1b0
Shorter paths to HAL, ExtUI ( #17156 )
2020-03-13 16:29:29 -05:00
Scott Lahteine
112245ee48
More explicit EEPROM types ( #17127 )
2020-03-11 16:41:18 -05:00
jufimu12
627aa8db2d
Fix G34, add HOME_AFTER_G34 option ( #17108 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-10 20:00:26 -05:00
Vert
8bbcbc528c
Fix Z4 stepper indirection macros ( #17107 )
2020-03-10 15:57:10 -05:00
Scott Lahteine
b579f5dc99
Move 'last_pause_state' closer to usage
2020-03-09 17:46:49 -05:00
MangaValk
57f488738b
[ToolChanger] Lock the current tool at power-up ( #17093 )
2020-03-08 16:13:41 -05:00
Scott Lahteine
64d092935b
More useful ENABLED / DISABLED macros ( #17054 )
2020-03-07 22:20:41 -06:00
Scott Lahteine
913de024a9
Change PID dummy value to NAN
...
Fixes #17078
2020-03-06 13:55:27 -06:00
Scott Lahteine
7709261ea9
Move shared code to wait_for_bed_heating
2020-03-04 12:50:57 -06:00
Scott Lahteine
83a60f15ff
Fix EEPROM compile errors
2020-03-03 14:21:07 -06:00
Scott Lahteine
5e28b0f471
Minor EEPROM cleanup
2020-03-02 21:56:21 -06:00
Scott Lahteine
3a07b4412d
Asynchronous M114 and (R)ealtime position option ( #17032 )
2020-03-02 21:52:53 -06:00
InsanityAutomation
552f7a91d0
Default on/off for Power Loss Recovery ( #17051 )
2020-03-02 16:07:53 -06:00
Scott Lahteine
5aa528781f
Fix ambiguous type
...
Co-Authored-By: Andrew Kroll <xxxajk@gmail.com>
2020-03-02 13:23:07 -06:00
Scott Lahteine
49c5f614c6
Minor motion style changes
2020-03-02 12:54:18 -06:00
Scott Lahteine
6b5347ee39
Improved M900
2020-03-02 12:05:00 -06:00
Scott Lahteine
b1a50d54e2
HAS_TRINAMIC => HAS_TRINAMIC_CONFIG
2020-03-02 12:04:36 -06:00
Jason Smith
cc822bf70f
Fix some 8 extruders issues, GTR build ( #17043 )
2020-03-01 21:19:02 -06:00
Scott Lahteine
362c9ae79a
Clean up use of extra_xyjerk
2020-03-01 19:23:48 -06:00
Scott Lahteine
edd1b76a9a
Fix set_current_from_steppers_for_axis(E_AXIS) bug
2020-03-01 14:36:21 -06:00
Scott Lahteine
c4db8e49a7
XYZ_CHAR macro
2020-03-01 14:36:06 -06:00
Scott Lahteine
5e9a10dbae
Use PSTR for common labels
2020-03-01 08:39:47 -06:00
ManuelMcLure
39c34e4992
Use ADC resolution in AD595/8495 calculation ( #17018 )
...
Fixes thermocouple reading on LP1768 (which uses 12-bit resolution).
2020-02-28 23:28:17 -06:00
Anders Sahlman
c669420134
Pass along sanity_check for (G33) probing ( #17006 )
2020-02-27 19:58:35 -06:00
Scott Lahteine
4f55723527
RUMBA has 3 E plugs
2020-02-27 07:48:02 -06:00
Scott Lahteine
be62ab2d02
Move reachable test to Probe class
2020-02-27 06:16:33 -06:00
Makoto Schoppert
8164cac797
Fix planner.cpp compile ( #16996 )
2020-02-27 03:29:44 -06:00
Scott Lahteine
263a7beeb5
More extra travel jerk changes
...
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 07:24:36 -06:00
Scott Lahteine
02cce7d4b4
Add TRAVEL_EXTRA_XYJERK option
...
See #16949
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 06:43:07 -06:00
Scott Lahteine
0a7e7a6fa5
Allow servo features in combination ( #16960 )
2020-02-26 06:26:54 -06:00
Scott Lahteine
cf597e2bb1
Allow weird probe values in G33
2020-02-26 05:33:57 -06:00
Scott Lahteine
5ebba4b19f
More serial strings
2020-02-26 04:11:12 -06:00
InsanityAutomation
cdcd45d651
Set LCD status for EEPROM errors ( #16977 )
2020-02-26 03:04:02 -06:00
Scott Lahteine
e78f607ef3
Use a STR_ prefix for non-translated strings
2020-02-26 03:02:03 -06:00
InsanityAutomation
4250a98908
Toolchange improvements ( #16979 )
2020-02-26 00:12:14 -06:00
Scott Lahteine
5071fe82ab
Ensure proper SD print completion ( #16967 )
2020-02-25 22:18:14 -06:00
Scott Lahteine
5e197df89a
Fix Babystepping loop (again)
2020-02-24 05:48:42 -06:00
Jason Smith
2bcc2ec7d1
Reduce default TMC baudrate to 57600 with Software Serial ( #16930 )
2020-02-23 07:48:56 -06:00
Scott Lahteine
b9b29bf4c0
Followup to babystep hotfix
2020-02-22 18:34:49 -06:00
Scott Lahteine
484e1a624c
CoreXY Babystepping hotfix
2020-02-22 02:52:59 -06:00
Jamie
e1d367e05a
Fix EEPROM errors with EXTRUDERS == 0 ( #16898 )
2020-02-21 07:42:13 -06:00
Scott Lahteine
6320f9795c
More EEPROM cleanup
2020-02-20 20:56:13 -06:00
Scott Lahteine
b8b225c8b5
Function for CONFIG_ECHO_HEADING
2020-02-20 20:36:50 -06:00
Scott Lahteine
99a5074372
Fix babystep include, typos in stepper.cpp
...
Fix #16881
2020-02-16 17:49:21 -06:00
Scott Lahteine
4360142bd1
Defer updated ADC
2020-02-15 22:37:16 -06:00
Scott Lahteine
72fae2faa5
Require TMCStepper 0.6.2
2020-02-15 22:35:28 -06:00
Scott Lahteine
64a81f887a
EXPERIMENTAL integrated BABYSTEPPING ( #16829 )
2020-02-15 21:42:28 -06:00
Scott Lahteine
64b96f3908
Double ADC read frequency ( #16864 )
2020-02-15 19:10:46 -06:00
Scott Lahteine
0b984519c3
Clean up stepper and babystep ( #16857 )
2020-02-14 05:14:37 -06:00
Scott Lahteine
1d8d91afc6
No limit needed on this raise
...
Remove an extraneous limit from #16811 .
2020-02-12 14:57:11 -06:00
Scott Lahteine
189c101793
Use prior babystep delay method ( #16833 )
2020-02-11 08:52:11 -06:00
Scott Lahteine
2836834d7e
Unify step pulse timing of ISR / babystep ( #16813 )
2020-02-10 16:58:21 -06:00
Scott Lahteine
18a7276909
Revert "Coolstep for TMC2130, 2209, 5130, 5160"
...
Reverting #16790 as not ready for primetime.
2020-02-09 21:22:26 -06:00
InsanityAutomation
84b6e11bd5
Better probe fail handling ( #16811 )
2020-02-09 07:46:38 -06:00
Fabio Santos
894762259b
Coolstep for TMC2130, 2209, 5130, 5160 ( #16790 )
2020-02-08 21:01:57 -06:00
Scott Lahteine
130e36d766
Tweak ABL logging, document probing
2020-02-08 17:47:54 -06:00
Robert Stein
3a3429b1ef
Fix probe with multi-endstops ( #16793 )
2020-02-06 15:28:46 -06:00
Scott Lahteine
f312ddfa4f
More updates for 8 extruders, REPEAT
2020-02-04 12:37:20 -06:00
Scott Lahteine
7bf2190f03
Fix CALIBRATION_GCODE pin handling
2020-02-04 08:32:43 -06:00
Scott Lahteine
081ef46e76
Fix Arduino IDE compile for DUE
...
Fixes #16767
2020-02-04 08:32:20 -06:00
Scott Lahteine
15b6ad41bc
Fix E stepper stays on bug
...
Fixes #16753
2020-02-04 02:39:37 -06:00
Bob Kuhn
0268c1d02c
STM32duino - Use SDIO for onboard SD ( #16756 )
2020-02-04 01:24:11 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
Scott Lahteine
7f9c62437e
Corner Leveling: Add inset for each side ( #16759 )
2020-02-03 00:00:35 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 ( #16755 )
2020-02-02 00:02:30 -06:00
Scott Lahteine
ee6003be87
Revert breaking change to _FAN_PWM macro
2020-02-01 23:07:20 -06:00
Scott Lahteine
4716dac874
Apply REPEAT, RREPEAT, and loop macros ( #16757 )
2020-02-01 21:00:53 -06:00
Scott Lahteine
0e72c315a0
Minor string storage optimization
2020-02-01 20:29:31 -06:00
Scott Lahteine
22556a7bbf
More 8-extruder fixups
2020-02-01 15:19:58 -06:00
Scott Lahteine
995a9238b3
Probe singleton patch
...
Followup to #16751
2020-02-01 07:57:10 -06:00
Jason Smith
c3cab37d7e
Fix Temperature::over_autostart_threshold ( #16749 )
2020-02-01 04:51:57 -06:00
InsanityAutomation
e58d1bf974
G34 automatic point assignment ( #16473 )
2020-02-01 04:50:44 -06:00
Scott Lahteine
90b6324563
Encapsulate probe as singleton class ( #16751 )
2020-02-01 04:21:36 -06:00
Scott Lahteine
43d3463d5d
Misc cleanup, whitespace
2020-02-01 03:50:42 -06:00
Jason Smith
9a8de23858
Consistent M112 with Emergency Parser ( #16747 )
2020-01-31 23:08:37 -06:00
Scott Lahteine
c4df5cf9a6
Include macros for delta ABC
2020-01-31 04:40:33 -06:00
Artur Petrzak
e4679c1b78
(21) PT100 for MCUs with 3.3v logic ( #16731 )
2020-01-30 18:00:37 -06:00
Scott Lahteine
9caf5c05e7
Refactor heater watch, job timer auto-start ( #16725 )
2020-01-30 03:24:43 -06:00
Scott Lahteine
50889c0f94
Move L64XX index_to_axis to progmem ( #16697 )
2020-01-30 03:24:23 -06:00
chgi
99b6a132bc
Fix G60/G61 slots > 8 and compile error ( #16715 )
2020-01-30 03:18:45 -06:00
InsanityAutomation
9bb8176d34
Fix Toolchange (!no_move) return to status ( #16699 )
2020-01-29 00:06:06 -06:00
Jason Smith
131acf304b
Fix Manual Bed Leveling with multiple extruders ( #16688 )
2020-01-27 15:57:21 -06:00
Hans007a
e2eef1256a
G60/G61 Position Save/Restore ( #16557 )
2020-01-26 23:19:05 -06:00
Scott Lahteine
56cd747c8b
Rename some temperature members
2020-01-26 21:08:55 -06:00
Scott Lahteine
1d1dc8e339
More 8 extruder defines
2020-01-26 03:24:54 -06:00
Jason Smith
44d400db83
Fix HOMING_BACKOFF_MM for DELTA ( #16657 )
2020-01-26 03:16:03 -06:00
yangwenxiong
248b7dfa59
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans ( #16595 )
2020-01-25 02:13:39 -06:00
InsanityAutomation
79810b7fcb
G12 defaults per tool. Event G-code for post-toolchange ( #16554 )
2020-01-21 02:51:23 -06:00
MaukCC
04d64351a2
Add HMS434 V15 ATSAM board ( #16620 )
2020-01-21 01:10:31 -06:00
InsanityAutomation
97b5a5f469
Provide methods for M420 + MBL ( #16602 )
2020-01-20 01:44:36 -06:00
Giuliano Zaro
ef8f829513
Fix CHAMBER_MAXTEMP security margin ( #16600 )
2020-01-20 00:44:51 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
Scott Lahteine
e9ae585647
Patch for _STEP_INIT
2020-01-19 20:50:33 -06:00
Scott Lahteine
dda76e50a9
Use bool in pin compare
2020-01-19 20:05:53 -06:00
Scott Lahteine
37849969ad
Function-like macros
2020-01-19 20:01:22 -06:00
Scott Lahteine
707349d492
Updates for L64XX
2020-01-19 19:53:12 -06:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
Scott Lahteine
1bb1ce7475
Move macros to stepper/indirection
2020-01-16 05:25:16 -06:00
Jason Smith
c305c2cc6b
Fix some warnings, Melzi pins
2020-01-15 19:57:16 -06:00
Dennis
2d7f94cae1
Adjustable ADC debounce delay ( #16264 )
2020-01-15 18:06:03 -06:00
Bob Kuhn
1ad53cee1f
Improved STMicro L64XX stepper driver support ( #16452 )
2020-01-13 18:47:30 -06:00
Jason Smith
d22eb261cf
Fix probeless delta build ( #16537 )
2020-01-11 17:14:33 -06:00
FlyingSamson
fbf2f36cae
Only constrain motion on homed axes ( #16533 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-01-11 17:06:52 -06:00
Giuliano Zaro
0391e5bcc7
Prevent Z misaligment on tool change ( #16518 )
2020-01-10 16:12:21 -06:00
ellensp
669fe74096
Fix compile error w/out LCD ( #16502 )
2020-01-09 04:51:41 -06:00
Scott Lahteine
6e658a7c04
Code style and comment tweaks
2020-01-08 20:00:26 -06:00
Scott Lahteine
95046c9047
Extend SERIAL_CHAR to take multiple arguments
2020-01-08 18:36:47 -06:00
Vertabreaker
d26c32375e
Fix EEPROM array size bug ( #16475 )
2020-01-07 21:49:27 -06:00
Vertabreaker
5e1f0e5e90
Followup to EEPROM patch ( #16470 )
2020-01-05 02:19:50 -06:00
Jamie
fc07b0ea30
Fix EEPROM error with EXTRUDERS == 0 ( #16464 )
2020-01-05 01:54:30 -06:00
George Fu
e593da1c23
Update and fix DGUS ( #16317 )
2020-01-03 21:00:44 -06:00
Jason Smith
3cade6245e
Fix MIN_PROBE_EDGE bug in default ABL G29 ( #16367 )
2020-01-03 17:46:26 -06:00
Scott Lahteine
1d0452c41e
Standardize drivers.h values, add class indirection ( #16448 )
2020-01-03 17:11:36 -06:00
Dirk O. Kaar
d0e1166cce
Fix Visual Micro "Arduino IDE for Visual Studio" support ( #16418 )
2020-01-02 19:01:38 -06:00
Scott Lahteine
a2cda631d9
Clean up trailing whitespace
2020-01-02 16:33:50 -06:00
Jason Smith
9ff2d34bf8
Fix warnings in stepper.cpp ( #16364 )
2020-01-01 22:06:50 -06:00
Giuliano Zaro
47edbd9220
Fix min limit for acc, feed, jerk ( #16416 )
2020-01-01 20:38:33 -06:00
InsanityAutomation
1c9ccce520
Add NOZZLE_AS_PROBE (no probe offsets) ( #15929 )
2019-12-24 00:03:08 -06:00
Luc
24eaf2d7e0
Some ESP32 patches ( #16297 )
2019-12-22 16:11:17 -06:00
Jason Smith
d5bc5547ee
Step timing cleanup and rounding fix ( #16258 )
2019-12-21 18:36:25 -06:00
Markus Towara
856013cc0f
Fix planner compile error ( #16272 )
2019-12-20 22:04:49 -06:00
BigTreeTech
bbe0ffb2fa
BigTreeTech SKR v1.4 support ( #16236 )
2019-12-19 02:41:35 -06:00
Jason Smith
1bad8f1b17
Improve pulse timing and step reliability ( #16128 )
2019-12-19 02:38:48 -06:00
Luu Lac
509e1ab053
TOUCH_MI_DEPLOY_XPOS fallback to X_MIN_POS ( #16226 )
2019-12-15 11:21:39 -06:00
Bo Herrmannsen
98382fcea5
Include Z in SCARA steps feedrate ( #16193 )
2019-12-12 17:13:49 -06:00
iain MacDonnell
629c039eed
Update M503 MBL G29 report ( #16199 )
2019-12-12 16:54:54 -06:00
Antti Andreimann
b65ab21733
Fix compile error with disabled PIDTEMP ( #16108 )
2019-12-05 20:51:41 -06:00
Vertabreaker
0832a60db3
EXP3D Imprimante Multifonction ( #16079 )
2019-12-03 06:52:38 -06:00
Scott Lahteine
cb7817093f
More serial macro cleanup
2019-12-01 22:23:36 -06:00
Scott Lahteine
9114a14eca
Fix commas in EEPROM code
2019-12-01 21:59:58 -06:00
brian park
b258cc85bf
Mostly Printed SCARA (MPSCARA) support ( #15573 )
2019-11-30 08:57:34 -06:00
Scott Lahteine
f83bc0aa13
Optimize common strings
...
Saves 128 bytes in testing with `mftest mega 1 -y`
2019-11-29 22:54:42 -06:00
Bob
5a98c83eef
Use MAX6675 SPI pins for MAX31865 over SPI pins ( #16024 )
2019-11-27 01:45:03 -06:00
Jason Smith
752a1e76ab
Float ABL mesh boundaries, no probe position rounding ( #16018 )
2019-11-27 01:29:25 -06:00
Scott Lahteine
077eeaa0f4
Fix mixing extruder feedrate ( #15905 )
2019-11-26 18:03:59 -06:00
haschtl
ff6518c0a8
Add PID_FAN_SCALING option ( #15585 )
2019-11-26 03:34:43 -06:00
Chris Pepper
c1aac3a0c9
Fix delta_mm.e with zero extruders ( #15996 )
2019-11-26 02:58:17 -06:00
Jason Smith
d0282e5ba8
Allow slop in position_is_reachable for delta ( #16003 )
2019-11-26 02:53:28 -06:00
Scott Lahteine
47c19aa2b3
Clean up probe accessors
2019-11-23 17:02:04 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Bob
751cd1f533
MAX31865 temperature sensor ( #15930 )
2019-11-21 03:15:10 -06:00
Scott Lahteine
3f4636e916
"nozzle_to_probe_offset" is obsolete
2019-11-13 03:07:54 -06:00
Scott Lahteine
a4709ba765
Store unscaled PID values in EEPROM ( #15884 )
2019-11-13 01:47:46 -06:00
Lino Barreca
ac71cdc265
New HardwareTimer for STM32 5.7.0 ( #15655 )
2019-11-12 19:23:02 -06:00
Scott Lahteine
5e5045c4ee
Touch UI finishing touches
2019-11-10 18:52:53 -06:00
Marcio Teixeira
5639b8ca20
Touch UI fixes for Cocoa Press ( #15847 )
2019-11-10 18:49:41 -06:00
LinFor
48b7a1e66e
Allow non-zero "fan off" PWM value ( #15709 )
2019-11-10 16:33:56 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro ( #15829 )
2019-11-09 17:59:04 -06:00
LinFor
a84e3d1b80
Use native ADC resolution where possible ( #15719 )
2019-11-06 17:49:17 -06:00
Jason Smith
814a2eaf8f
Allow TMC baud rate override ( #15773 )
2019-11-06 17:08:12 -06:00
Scott Lahteine
e6dfc991ae
Patch tabs, heater led tests
2019-11-06 16:28:36 -06:00
Scott Lahteine
a89f4703df
Tweak permissions
2019-11-06 16:10:14 -06:00
Scott Lahteine
15f94e5ee5
Add NUL_STR global
2019-11-02 07:31:07 -05:00
Scott Lahteine
c80eda073f
M119 => report_states
2019-10-30 15:24:10 -05:00
LinFor
7d24f152d8
Fix a typo breaking the build ( #15726 )
2019-10-30 15:10:08 -05:00
