Scott Lahteine
913de024a9
Change PID dummy value to NAN
...
Fixes #17078
2020-03-06 13:55:27 -06:00
Scott Lahteine
1da49d0ac5
Non-blocking Max7219 test pattern
2020-03-06 13:19:38 -06:00
Scott Lahteine
ca4423ed2a
Clean up pins debugging
2020-03-06 13:14:22 -06:00
Scott Lahteine
6cd99e6a77
Add pins to the pins debug list
2020-03-06 13:14:22 -06:00
Scott Lahteine
6d18f715e4
Fix M0/M1 message string
2020-03-06 13:14:22 -06:00
thinkyhead
459a0dae29
[cron] Bump distribution date (2020-03-06)
2020-03-06 00:04:16 +00:00
Scott Lahteine
3a72b0fd41
Update Chinese (TW) language ( #17071 )
2020-03-05 15:39:49 -06:00
Scott Lahteine
f0248c9ed9
Update Turkish language ( #17070 )
2020-03-05 15:37:02 -06:00
Scott Lahteine
c0801e900d
Define Z_MIN_PROBE_PIN for Cohesion 3D Remix
2020-03-05 15:10:46 -06:00
Scott Lahteine
e3da86fb45
Fix SKR test for ONBOARD SD
2020-03-05 13:37:09 -06:00
Scott Lahteine
0578e9b16e
Move SENSORLESS_PROBING to the probes section
...
Fixes a bug with HAS_BED_PROBE not being set before use.
2020-03-05 11:05:11 -06:00
thinkyhead
7e58739a1f
[cron] Bump distribution date (2020-03-05)
2020-03-05 00:04:13 +00:00
Scott Lahteine
631addbbb4
SAMD51 SoftwareSerial ( #17041 )
2020-03-04 13:15:32 -06:00
Scott Lahteine
d4ac78535c
Allow Z_STOP_PIN override on SKR 1.4 ( #17063 )
2020-03-04 13:12:48 -06:00
Scott Lahteine
70863fbd55
Avoid name conflict with 'UART'
2020-03-04 12:50:58 -06:00
Scott Lahteine
7709261ea9
Move shared code to wait_for_bed_heating
2020-03-04 12:50:57 -06:00
thinkyhead
ab1863ac48
[cron] Bump distribution date (2020-03-04)
2020-03-04 00:04:06 +00:00
Scott Lahteine
72b63e9520
Fix TEMP_PROBE_PIN for SKR 1.4
...
Co-Authored-By: Anthrix <anthrix@users.noreply.github.com>
2020-03-03 14:53:22 -06:00
George Fu
a698bfdc2a
Update FYSETC S6 pins/variants ( #17056 )
2020-03-03 14:30:09 -06:00
thisiskeithb
efc739a880
Use BED_MAXTEMP for PTC_MAX_BED_TEMP ( #17061 )
2020-03-03 14:22:28 -06:00
Scott Lahteine
83a60f15ff
Fix EEPROM compile errors
2020-03-03 14:21:07 -06:00
Scott Lahteine
c083728e4c
General code cleanup
2020-03-03 14:20:37 -06:00
Scott Lahteine
5e28b0f471
Minor EEPROM cleanup
2020-03-02 21:56:21 -06:00
Scott Lahteine
3a07b4412d
Asynchronous M114 and (R)ealtime position option ( #17032 )
2020-03-02 21:52:53 -06:00
Scott Lahteine
5171e9da93
No more direct G28 calls
2020-03-02 21:01:58 -06:00
thinkyhead
12d05e4835
[cron] Bump distribution date (2020-03-03)
2020-03-03 00:04:10 +00:00
Scott Lahteine
07e22d1d65
Neopixel on LPC uses GPIO toggling
2020-03-02 17:20:01 -06:00
Scott Lahteine
646599d0d9
Finish M900 updates
2020-03-02 17:10:51 -06:00
Scott Lahteine
eb4d5120bf
Keep name around for old configs
2020-03-02 16:23:17 -06:00
InsanityAutomation
552f7a91d0
Default on/off for Power Loss Recovery ( #17051 )
2020-03-02 16:07:53 -06:00
jufimu12
ad4a9eb73a
Fix G34 probing range/error bug ( #17052 )
2020-03-02 13:35:02 -06:00
Scott Lahteine
5aa528781f
Fix ambiguous type
...
Co-Authored-By: Andrew Kroll <xxxajk@gmail.com>
2020-03-02 13:23:07 -06:00
ellensp
af23c0480e
Don't define 'valptr' if unused ( #17048 )
2020-03-02 13:17:52 -06:00
ellensp
624ab24a5c
Suppress thisItemNr warning ( #17049 )
2020-03-02 13:14:08 -06:00
Jason Smith
66334820ca
Add TMC micro-steps sanity check ( #17044 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-02 13:13:04 -06:00
Scott Lahteine
2c4e054e9a
Fix fastio pin comment
2020-03-02 13:11:30 -06:00
Scott Lahteine
49c5f614c6
Minor motion style changes
2020-03-02 12:54:18 -06:00
Scott Lahteine
6b5347ee39
Improved M900
2020-03-02 12:05:00 -06:00
Scott Lahteine
b1a50d54e2
HAS_TRINAMIC => HAS_TRINAMIC_CONFIG
2020-03-02 12:04:36 -06:00
Scott Lahteine
736521a3f1
Balance mega tests, shorten some env names
2020-03-01 21:20:22 -06:00
Scott Lahteine
870a1f753a
Fix undefined STATUS_CHAMBER_WIDTH
2020-03-01 21:19:50 -06:00
Jason Smith
cc822bf70f
Fix some 8 extruders issues, GTR build ( #17043 )
2020-03-01 21:19:02 -06:00
Jason Smith
5da6819277
Fix build issues with REPRAPWORLD_KEYPAD ( #17038 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-01 19:54:22 -06:00
Scott Lahteine
362c9ae79a
Clean up use of extra_xyjerk
2020-03-01 19:23:48 -06:00
thinkyhead
ac93df43cd
[cron] Bump distribution date (2020-03-02)
2020-03-02 00:04:18 +00:00
ellensp
4b256a6fa8
Revert FYSETC Mini encoder change ( #17040 )
...
Reverting #17010
2020-03-01 17:59:00 -06:00
Jason Smith
4a3fcd0bf9
Fix three extruder with auto-fan build ( #17035 )
2020-03-01 17:37:16 -06:00
Scott Lahteine
edd1b76a9a
Fix set_current_from_steppers_for_axis(E_AXIS) bug
2020-03-01 14:36:21 -06:00
Scott Lahteine
c4db8e49a7
XYZ_CHAR macro
2020-03-01 14:36:06 -06:00
Scott Lahteine
3473b21710
Move millis_t includes
2020-03-01 09:50:53 -06:00
Scott Lahteine
5e9a10dbae
Use PSTR for common labels
2020-03-01 08:39:47 -06:00
thinkyhead
1d609d2bbd
[cron] Bump distribution date (2020-03-01)
2020-03-01 00:04:02 +00:00
Vert
6c9ca1bec2
Clarify GT2560 common pins ( #17021 )
2020-02-29 04:35:10 -06:00
Scott Lahteine
730804289c
Catch more LPC1768 pin conflicts ( #17019 )
2020-02-29 04:14:40 -06:00
ManuelMcLure
39c34e4992
Use ADC resolution in AD595/8495 calculation ( #17018 )
...
Fixes thermocouple reading on LP1768 (which uses 12-bit resolution).
2020-02-28 23:28:17 -06:00
thinkyhead
b946530ef6
[cron] Bump distribution date (2020-02-29)
2020-02-29 00:03:54 +00:00
ellensp
9b145c7c73
Reverse encoder for FYSETC Mini 12864 2.1 + SKR 1.3 ( #17010 )
2020-02-28 12:26:54 -06:00
jufimu12
ac755fce82
Fix G34 "Decreasing accuracy" bug ( #17013 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-02-28 11:42:51 -06:00
Scott Lahteine
97e87d8262
Fix G76 reachable test ( #17005 )
2020-02-27 22:47:44 -06:00
Anders Sahlman
c669420134
Pass along sanity_check for (G33) probing ( #17006 )
2020-02-27 19:58:35 -06:00
thinkyhead
f8497b8171
[cron] Bump distribution date (2020-02-28)
2020-02-28 00:03:53 +00:00
Scott Lahteine
bfbd976c09
General G76 cleanup
2020-02-27 07:53:24 -06:00
Scott Lahteine
a75a25cd7c
Replace direct call to G28(true)
2020-02-27 07:48:34 -06:00
Scott Lahteine
4f55723527
RUMBA has 3 E plugs
2020-02-27 07:48:02 -06:00
Scott Lahteine
77b82d300a
Add idle_no_sleep
2020-02-27 06:45:33 -06:00
Scott Lahteine
e5d39063a2
Cleanups for PTC
2020-02-27 06:45:23 -06:00
Scott Lahteine
be62ab2d02
Move reachable test to Probe class
2020-02-27 06:16:33 -06:00
Roman Moravčík
9f8ee31144
Update Slovak language ( #17002 )
2020-02-27 03:38:46 -06:00
Makoto Schoppert
8164cac797
Fix planner.cpp compile ( #16996 )
2020-02-27 03:29:44 -06:00
thinkyhead
a80eda41bc
[cron] Bump distribution date (2020-02-27)
2020-02-27 00:03:42 +00:00
Scott Lahteine
bafe8d920a
Handle print completed LED event in M0
2020-02-26 12:02:54 -06:00
Scott Lahteine
633b716a3a
Define DIAG pins for MKS SGen-L
2020-02-26 11:35:07 -06:00
Scott Lahteine
832951ec44
Case-insensitive g-code option ( #16932 )
2020-02-26 09:23:55 -06:00
Scott Lahteine
18b875dc9f
Allow print recovery after parking
2020-02-26 08:16:46 -06:00
Scott Lahteine
6fd7f4fe1b
Fix unified status bed temp display
2020-02-26 08:09:57 -06:00
Scott Lahteine
263a7beeb5
More extra travel jerk changes
...
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 07:24:36 -06:00
Scott Lahteine
6913a4dfa8
Prevent park_point compile error
2020-02-26 07:10:35 -06:00
Scott Lahteine
025c50cc6d
Quick-homing sensorless back-off ( #16872 )
2020-02-26 06:50:13 -06:00
Scott Lahteine
02cce7d4b4
Add TRAVEL_EXTRA_XYJERK option
...
See #16949
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 06:43:07 -06:00
Scott Lahteine
0a7e7a6fa5
Allow servo features in combination ( #16960 )
2020-02-26 06:26:54 -06:00
Scott Lahteine
daa32013b1
Sanity check for LPC serial pin conflict ( #16981 )
2020-02-26 06:26:30 -06:00
Scott Lahteine
ec1b86d9cb
Serial strings in macros
2020-02-26 05:38:33 -06:00
Scott Lahteine
cf597e2bb1
Allow weird probe values in G33
2020-02-26 05:33:57 -06:00
ellensp
e76f2ed4cb
Fix Trinamic pulse rate auto-assignment ( #16966 )
2020-02-26 04:34:21 -06:00
Scott Lahteine
b5c2190b38
String optimize followup
2020-02-26 04:32:40 -06:00
InsanityAutomation
28008aced0
Correct SKR expansion port pins ( #16974 )
2020-02-26 04:18:34 -06:00
ellensp
70af080813
Add LPC1768 Serial ports for pinsDebug ( #16980 )
2020-02-26 04:12:53 -06:00
Scott Lahteine
5ebba4b19f
More serial strings
2020-02-26 04:11:12 -06:00
InsanityAutomation
cdcd45d651
Set LCD status for EEPROM errors ( #16977 )
2020-02-26 03:04:02 -06:00
Scott Lahteine
e78f607ef3
Use a STR_ prefix for non-translated strings
2020-02-26 03:02:03 -06:00
Scott Lahteine
6b9a17be16
Language: "failsafe" => "Defaults"
2020-02-26 02:03:47 -06:00
InsanityAutomation
4250a98908
Toolchange improvements ( #16979 )
2020-02-26 00:12:14 -06:00
Scott Lahteine
5b438fb20d
HAS_SDCARD_CONNECTION is more obsolete
2020-02-25 22:30:30 -06:00
Scott Lahteine
5071fe82ab
Ensure proper SD print completion ( #16967 )
2020-02-25 22:18:14 -06:00
thinkyhead
91cff02596
[cron] Bump distribution date (2020-02-26)
2020-02-26 00:03:52 +00:00
Scott Lahteine
454cbcce51
Fix the wait loop in M0 / M1
2020-02-25 12:20:54 -06:00
InsanityAutomation
6bfae5de6f
Fix SKR 1.4 Turbo SD_DETECT_PIN ( #16955 )
2020-02-25 03:17:08 -06:00
InsanityAutomation
3e685777a8
Fix LCD cutter/bed icons overlapping ( #16956 )
2020-02-25 03:07:36 -06:00
Giuliano Zaro
d13b153230
Update Italian language ( #16947 )
2020-02-25 03:05:58 -06:00
InsanityAutomation
3a6f776c4b
Update POWER_LOSS_PIN comment ( #16957 )
2020-02-24 23:51:10 -06:00
thinkyhead
ca305b03b7
[cron] Bump distribution date (2020-02-25)
2020-02-25 00:04:00 +00:00
Scott Lahteine
9040394e8e
Fix card_eof error
2020-02-24 11:00:01 -06:00
Marcio T
955ce393df
Restore tabs in Makefile ( #16944 )
2020-02-24 10:42:12 -06:00
Marcio T
92278a45ed
Allow Z_SAFE_HOMING_POINT outside bed ( #16945 )
2020-02-24 10:40:12 -06:00
Scott Lahteine
a254354e68
BS_TOTAL_AXIS => BS_TOTAL_IND
2020-02-24 06:11:43 -06:00
Scott Lahteine
5e197df89a
Fix Babystepping loop (again)
2020-02-24 05:48:42 -06:00
Scott Lahteine
8ba5ef8cae
"Init. Media" => "Attach Media"
2020-02-24 05:33:23 -06:00
Scott Lahteine
9a51f29efa
Simplified E_AXIS_HAS macro
2020-02-23 23:55:56 -06:00
Jason Smith
ebd2bcc177
Fix AXIS_HAS_SW_SERIAL
2020-02-23 21:59:31 -06:00
thinkyhead
9717b3044f
[cron] Bump distribution date (2020-02-24)
2020-02-24 00:03:56 +00:00
Jason Smith
2bcc2ec7d1
Reduce default TMC baudrate to 57600 with Software Serial ( #16930 )
2020-02-23 07:48:56 -06:00
Giuliano Zaro
529d57bddf
Sync Italian language ( #16935 )
2020-02-23 07:47:30 -06:00
Scott Lahteine
0ba18848af
Allow USE_GCODE_SUBCODES for debugging
2020-02-22 22:50:03 -06:00
Scott Lahteine
b2328d089a
Allow LCD_PIXEL_WIDTH/HEIGHT override
2020-02-22 21:36:21 -06:00
Scott Lahteine
29ec868c4b
Commit last SD line before fileHasFinished
2020-02-22 20:46:52 -06:00
Scott Lahteine
1d431fe8d2
Suppress "packed member" warning
2020-02-22 19:28:24 -06:00
ZMiguel Alves
2471a8bb91
Define ANET_FULL_GRAPHICS_LCD pins for SKR 1.4 ( #16928 )
2020-02-22 18:45:10 -06:00
ellensp
7bf3581b02
Fix M0/M1 broken wait loop ( #16921 )
2020-02-22 18:37:39 -06:00
Scott Lahteine
b9b29bf4c0
Followup to babystep hotfix
2020-02-22 18:34:49 -06:00
thisiskeithb
20df64814e
Finish Custom User Menu sanity-check ( #16917 )
2020-02-22 18:33:34 -06:00
thinkyhead
34c92bbc17
[cron] Bump distribution date (2020-02-23)
2020-02-23 00:03:55 +00:00
vivian-ng
eeec4c27e7
[ESP32] Allow user to define pins for hardware Serial1 and Serial2 ( #16918 )
2020-02-22 04:00:10 -06:00
Scott Lahteine
484e1a624c
CoreXY Babystepping hotfix
2020-02-22 02:52:59 -06:00
Scott Lahteine
ac3e27c026
Hotfix for Babystepping
2020-02-22 02:52:21 -06:00
Scott Lahteine
1ab6f910b6
Use moves_free in ok_to_send
2020-02-22 02:30:59 -06:00
thinkyhead
cfd49740eb
[cron] Bump distribution date (2020-02-22)
2020-02-22 00:03:47 +00:00
Scott Lahteine
5d16497bed
Tweak pins spacing, comments
2020-02-21 08:33:11 -06:00
ellensp
9f53bbd791
Add PICA shields support ( #16891 )
2020-02-21 08:27:32 -06:00
Jamie
e1d367e05a
Fix EEPROM errors with EXTRUDERS == 0 ( #16898 )
2020-02-21 07:42:13 -06:00
Karl Andersson
f30897500d
Disable spreadcycle in tmc_enable_stallguard<2209> ( #16890 )
2020-02-21 07:40:55 -06:00
Tanguy Pruvot
68de12acbf
Followup to autoreport patch ( #16914 )
...
See a1f026f57a
2020-02-21 07:36:59 -06:00
Scott Lahteine
6320f9795c
More EEPROM cleanup
2020-02-20 20:56:13 -06:00
Scott Lahteine
22b974691e
Tweak process_line_done for speed
2020-02-20 20:36:51 -06:00
Scott Lahteine
4ef627d79f
Add a note on EEPROM todo
2020-02-20 20:36:50 -06:00
Scott Lahteine
19991e269b
Show end prompt with Print Event LEDs
2020-02-20 20:36:50 -06:00
Scott Lahteine
b8b225c8b5
Function for CONFIG_ECHO_HEADING
2020-02-20 20:36:50 -06:00
Scott Lahteine
a1f026f57a
Inline manage_inactivity, tweak autoreport_paused
2020-02-20 20:36:50 -06:00
Scott Lahteine
2b788e9aa6
Single envs for specific boards
2020-02-20 20:20:15 -06:00
thinkyhead
140e4ac507
[cron] Bump distribution date (2020-02-21)
2020-02-21 00:03:41 +00:00
Robby Candra
1c52d76668
Serial redirect for Move Command when stopping ( #16906 )
2020-02-20 02:22:07 -06:00
thinkyhead
178735b958
[cron] Bump distribution date (2020-02-20)
2020-02-20 00:03:52 +00:00
thinkyhead
4c179ba3f7
[cron] Bump distribution date (2020-02-19)
2020-02-19 00:03:54 +00:00
thinkyhead
05f51e9355
[cron] Bump distribution date (2020-02-18)
2020-02-18 00:03:31 +00:00
thinkyhead
75e3aa12c5
[cron] Bump distribution date (2020-02-17)
2020-02-17 00:03:58 +00:00
Scott Lahteine
99a5074372
Fix babystep include, typos in stepper.cpp
...
Fix #16881
2020-02-16 17:49:21 -06:00
vivian-ng
4c6f695bea
Put ESP32 I2S stepper task and Marlin on the same core ( #16874 )
2020-02-16 16:44:36 -06:00
Tanguy Pruvot
8bc3e63871
Update French language ( #16877 )
2020-02-16 16:39:17 -06:00
Giuliano Zaro
42208bc031
Fix unknown command on empty lines ( #16867 )
2020-02-16 01:10:20 -06:00
Giuliano Zaro
199a1ba0e5
Move SAMD51 Temperature timer to RTC ( #16868 )
2020-02-15 22:45:52 -06:00
Scott Lahteine
4360142bd1
Defer updated ADC
2020-02-15 22:37:16 -06:00
Scott Lahteine
ddce1c6ef2
Show '*' for zero 'stst' flag
2020-02-15 22:35:28 -06:00
Scott Lahteine
72fae2faa5
Require TMCStepper 0.6.2
2020-02-15 22:35:28 -06:00
Scott Lahteine
64a81f887a
EXPERIMENTAL integrated BABYSTEPPING ( #16829 )
2020-02-15 21:42:28 -06:00
Scott Lahteine
64b96f3908
Double ADC read frequency ( #16864 )
2020-02-15 19:10:46 -06:00
thinkyhead
52a1268089
[cron] Bump distribution date (2020-02-16)
2020-02-16 00:04:09 +00:00
Scott Lahteine
5584da388c
Conceal float rounding errors on display
...
Fix #16866
2020-02-15 02:55:41 -06:00
Scott Lahteine
efdaf940a5
Fix byte-to-percent display
...
Fixes #16866
2020-02-15 02:37:13 -06:00
Scott Lahteine
1087e318e5
Fix a BORG compile warning
2020-02-15 01:47:15 -06:00
thinkyhead
150237f712
[cron] Bump distribution date (2020-02-15)
2020-02-15 00:03:59 +00:00
George Fu
63dd0f249d
Fysetc S6 pins / LCD updates ( #16830 )
2020-02-14 07:18:57 -06:00
Scott Lahteine
0b984519c3
Clean up stepper and babystep ( #16857 )
2020-02-14 05:14:37 -06:00
Scott Lahteine
073e4443e8
Optimize "Dismiss" string
2020-02-14 00:05:06 -06:00
Scott Lahteine
00ba053c90
Clean up host actions code ( #16856 )
2020-02-13 23:39:27 -06:00
Giuliano Zaro
ff0c931e47
Add RAMPS 1.4.4 to AGCM4 ( #16606 )
2020-02-13 23:28:18 -06:00
Scott Lahteine
49a66bc4cc
Fix ESP32 warning, specify supported version
2020-02-13 19:22:13 -06:00
Scott Lahteine
f3f692adf7
Don't assert safe homing for delta/scara
2020-02-13 19:22:13 -06:00
Robby Candra
af84e362cc
Remove unused queue.stopped_N ( #16850 )
2020-02-13 18:59:32 -06:00
Gaston Dombiak
082117c4bb
Ping the job timer in M140 ( #16849 )
2020-02-13 18:43:47 -06:00
Giuliano Zaro
0e17d10bf3
Fix G-code line parsing ( #16840 )
2020-02-13 18:30:47 -06:00
thinkyhead
68077149e2
[cron] Bump distribution date (2020-02-14)
2020-02-14 00:04:13 +00:00
thinkyhead
62d7d49719
[cron] Bump distribution date (2020-02-13)
2020-02-13 00:03:34 +00:00
Scott Lahteine
1d8d91afc6
No limit needed on this raise
...
Remove an extraneous limit from #16811 .
2020-02-12 14:57:11 -06:00
Robby Candra
a83ad2d9d4
Define MarlinSerial instances for DGUS ( #16841 )
2020-02-11 20:30:20 -06:00
thinkyhead
0306c1bb0c
[cron] Bump distribution date (2020-02-12)
2020-02-12 00:03:54 +00:00
Giuliano Zaro
4a733796bd
Prevent pin glitches on out commutation ( #16835 )
...
Better for switching from pulled input to output and also set real output (with no input enabled).
2020-02-11 10:43:28 -06:00
Scott Lahteine
0fd0554b5f
Simplify old safe homing sanity check
2020-02-11 10:07:45 -06:00
Scott Lahteine
fa6e7cb733
Function-style critical section macros
2020-02-11 09:37:04 -06:00
Scott Lahteine
7b02a62da8
Fix up tests
2020-02-11 09:37:04 -06:00
Scott Lahteine
189c101793
Use prior babystep delay method ( #16833 )
2020-02-11 08:52:11 -06:00
Scott Lahteine
1c556cd90d
Recommend Z Safe Homing
...
Co-Authored-By: Vertabreaker <opyrus@hotmail.com>
2020-02-11 07:40:37 -06:00
Scott Lahteine
e442663e2a
No Z sensorless req'd if homing with probe
...
Fixes #16674
2020-02-11 04:15:25 -06:00
Scott Lahteine
71539bcbeb
Undo driver type auto-assignment for now
...
Good general concept but needs more time to develop and group with a stepper suite.
2020-02-11 02:32:01 -06:00
Giuliano Zaro
d5790e09a5
Update SAMD51 EEPROM repo link ( #16832 )
2020-02-11 02:05:58 -06:00
thinkyhead
b26f7fca3f
[cron] Bump distribution date (2020-02-11)
2020-02-11 00:04:03 +00:00
Scott Lahteine
2836834d7e
Unify step pulse timing of ISR / babystep ( #16813 )
2020-02-10 16:58:21 -06:00
proferabg
3f87f912c5
Enable hotend / bed PID separately in ExtUI ( #16827 )
2020-02-10 16:48:22 -06:00
Scott Lahteine
fa4a6cdb5c
Fix out-of-order M0 after SD printing
...
Fixes #14774
Co-Authored-By: tol2cj <tol2cj@users.noreply.github.com>
2020-02-10 16:33:40 -06:00
Scott Lahteine
3bef7a4450
Add g-code quoted strings, improve stream code ( #16818 )
2020-02-10 14:52:15 -06:00
Daniel Mazurkiewicz
e561f744fa
Update MKS BASE and v1.6 pins ( #16806 )
2020-02-10 14:12:11 -06:00
Scott Lahteine
0b45493557
Add a caution to drivers.h
2020-02-09 21:58:12 -06:00
Scott Lahteine
18a7276909
Revert "Coolstep for TMC2130, 2209, 5130, 5160"
...
Reverting #16790 as not ready for primetime.
2020-02-09 21:22:26 -06:00
Scott Lahteine
28b48fc9bb
Revert change to AXIS_DRIVER_TYPE_X2
...
- Revisit this to figure out why it breaks
2020-02-09 20:49:55 -06:00
Scott Lahteine
a33d08928a
Tweak LPC1768 upload py script
2020-02-09 20:48:20 -06:00
thinkyhead
15e6ee6c7c
[cron] Bump distribution date (2020-02-10)
2020-02-10 00:03:46 +00:00
InsanityAutomation
a9549f7a08
Add PID, probe offsets to ExtUI ( #16792 )
2020-02-09 12:22:53 -06:00
InsanityAutomation
cc1ff27256
Bump config version to 020004 ( #16816 )
2020-02-09 12:15:02 -06:00
Scott Lahteine
0ce83dee95
Show print time with PRINTER_EVENT_LEDS
2020-02-09 11:37:43 -06:00
Scott Lahteine
38873596ec
Tweak parser warning
2020-02-09 11:37:43 -06:00
Scott Lahteine
ffcbba4447
Move MSG_MARLIN
2020-02-09 11:37:43 -06:00
Scott Lahteine
b9b07387d7
Minor HAL cleanup
2020-02-09 11:12:38 -06:00
Giuliano Zaro
90e2c42031
Adafruit Grand Central M4 fixes ( #16812 )
2020-02-09 09:57:22 -06:00
InsanityAutomation
84b6e11bd5
Better probe fail handling ( #16811 )
2020-02-09 07:46:38 -06:00
Fabio Santos
894762259b
Coolstep for TMC2130, 2209, 5130, 5160 ( #16790 )
2020-02-08 21:01:57 -06:00
thinkyhead
f0cbc85a07
[cron] Bump distribution date (2020-02-09)
2020-02-09 00:03:30 +00:00
Scott Lahteine
130e36d766
Tweak ABL logging, document probing
2020-02-08 17:47:54 -06:00
Scott Lahteine
f55abfeb95
Clean up Makefle indentation
2020-02-08 17:43:00 -06:00
thinkyhead
38bf5523e1
[cron] Bump distribution date (2020-02-08)
2020-02-08 00:02:22 +00:00
thinkyhead
12b3807a7f
[cron] Bump distribution date (2020-02-07)
2020-02-07 00:02:48 +00:00
Robert Stein
3a3429b1ef
Fix probe with multi-endstops ( #16793 )
2020-02-06 15:28:46 -06:00
Robby Candra
86812432f3
Remove extraneous Serial init ( #16794 )
2020-02-06 14:11:49 -06:00
Tanguy Pruvot
54aff83179
G26: Allow to set retraction for UBL mesh test ( #16511 )
2020-02-05 20:33:39 -06:00
Bob Kuhn
78fea4a9ca
Split up MKS_RUMBA32 into two variants ( #16781 )
2020-02-05 20:28:28 -06:00
thinkyhead
bb68eaa69e
[cron] Bump distribution date (2020-02-06)
2020-02-06 00:02:49 +00:00
thisiskeithb
9b4192cdd0
Add MKS Base 1.6 board ( #16783 )
2020-02-04 23:21:05 -06:00
thinkyhead
0ebd2f44d4
[cron] Bump distribution date (2020-02-05)
2020-02-05 00:02:59 +00:00
Scott Lahteine
f312ddfa4f
More updates for 8 extruders, REPEAT
2020-02-04 12:37:20 -06:00
Scott Lahteine
793939a365
Upgrade an ifdef
2020-02-04 08:46:37 -06:00
Scott Lahteine
7bf2190f03
Fix CALIBRATION_GCODE pin handling
2020-02-04 08:32:43 -06:00
Scott Lahteine
081ef46e76
Fix Arduino IDE compile for DUE
...
Fixes #16767
2020-02-04 08:32:20 -06:00
Scott Lahteine
15b6ad41bc
Fix E stepper stays on bug
...
Fixes #16753
2020-02-04 02:39:37 -06:00
Bob Kuhn
0268c1d02c
STM32duino - Use SDIO for onboard SD ( #16756 )
2020-02-04 01:24:11 -06:00
felixstorm
38a9706e16
Keep secure credentials in a separate config file ( #16773 )
2020-02-03 23:29:01 -06:00
InsanityAutomation
62d9e3f50e
Force T0 in UBL G29 on all multi-hotend setups ( #16774 )
2020-02-03 20:58:44 -06:00
Scott Lahteine
3ded99b894
[cron] Bump distribution date
2020-02-03 19:53:30 -06:00
felixstorm
f1dbfaf706
Fix warning for ESP32 ( #16771 )
2020-02-03 18:36:51 -06:00
ellensp
7d4fa9d504
Fix LCD Z Move character LCD display line ( #16772 )
2020-02-03 18:35:06 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
Scott Lahteine
7f9c62437e
Corner Leveling: Add inset for each side ( #16759 )
2020-02-03 00:00:35 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 ( #16755 )
2020-02-02 00:02:30 -06:00
Scott Lahteine
ee6003be87
Revert breaking change to _FAN_PWM macro
2020-02-01 23:07:20 -06:00
Scott Lahteine
4716dac874
Apply REPEAT, RREPEAT, and loop macros ( #16757 )
2020-02-01 21:00:53 -06:00
Scott Lahteine
0e72c315a0
Minor string storage optimization
2020-02-01 20:29:31 -06:00
Scott Lahteine
4937519d51
Fix LPC build with USE_WATCHDOG off
2020-02-01 20:29:31 -06:00
Scott Lahteine
63469ed8f7
Add EXP labels to SKR pins
2020-02-01 19:06:32 -06:00
Scott Lahteine
22556a7bbf
More 8-extruder fixups
2020-02-01 15:19:58 -06:00
Scott Lahteine
c4cbc54484
Suppress a compile warning
2020-02-01 10:38:07 -06:00
Scott Lahteine
7a4758a6a2
Fix RGB / Neopixel white color bug
...
See #16752
2020-02-01 10:11:36 -06:00
Scott Lahteine
995a9238b3
Probe singleton patch
...
Followup to #16751
2020-02-01 07:57:10 -06:00
Scott Lahteine
5296af94d2
Drop obsolete SD special char handling
...
See #14035
2020-02-01 06:49:56 -06:00
Scott Lahteine
0d342bac51
Fix CURRENT_STEP_DOWN compile error
2020-02-01 06:27:17 -06:00
Acenotass
832d33ce9d
Update Russian language ( #16750 )
2020-02-01 04:53:18 -06:00
Jason Smith
c3cab37d7e
Fix Temperature::over_autostart_threshold ( #16749 )
2020-02-01 04:51:57 -06:00
InsanityAutomation
e58d1bf974
G34 automatic point assignment ( #16473 )
2020-02-01 04:50:44 -06:00
Scott Lahteine
90b6324563
Encapsulate probe as singleton class ( #16751 )
2020-02-01 04:21:36 -06:00
Scott Lahteine
43d3463d5d
Misc cleanup, whitespace
2020-02-01 03:50:42 -06:00
Scott Lahteine
e64b7a3ab2
Clean up i2c encoder, sanitize serial
2020-02-01 00:57:14 -06:00
Jason Smith
9a8de23858
Consistent M112 with Emergency Parser ( #16747 )
2020-01-31 23:08:37 -06:00
Jason Smith
5b3d968634
Option for Trigorilla 1.4 with add-on endstops board ( #16737 )
2020-01-31 21:51:59 -06:00
rebel1
300b81bfcb
Fix BTT SKR 1.4 extra endstop pins ( #16738 )
2020-01-31 21:46:02 -06:00
Acenotass
0a6ae664bd
Update Russian language ( #16745 )
2020-01-31 21:43:44 -06:00
Scott Lahteine
c4df5cf9a6
Include macros for delta ABC
2020-01-31 04:40:33 -06:00
Scott Lahteine
02f61832c0
Add sanity-check for new Advanced Pause option
...
Followup to #16372
2020-01-30 23:24:40 -06:00
thinkyhead
dabf393920
[cron] Bump distribution date (2020-01-31)
2020-01-31 00:06:46 +00:00
Artur Petrzak
e4679c1b78
(21) PT100 for MCUs with 3.3v logic ( #16731 )
2020-01-30 18:00:37 -06:00
Scott Lahteine
62f52ebb3a
Fix up, improve endstop pin auto-assignment
...
Followup for #16723
2020-01-30 14:09:33 -06:00
Scott Lahteine
e8e25b80d1
Extend RX/TX pins for up to 8 extruders
2020-01-30 13:29:19 -06:00
Robert Stein
2822c0890a
Set up DIAG endstops for BTT SKR 1.4 / 1.4 Turbo ( #16727 )
2020-01-30 13:17:15 -06:00
Alexander Gavrilenko
c45d6b2017
Simultaneous use of rotary encoder and touch buttons ( #16729 )
2020-01-30 12:29:30 -06:00
felixstorm
8d4dd88bf9
Fix compile error in SdVolume on ESP32 ( #16728 )
2020-01-30 12:22:42 -06:00
Scott Lahteine
3c9464eea4
Tweak G60/G61 slots
2020-01-30 03:25:40 -06:00
Scott Lahteine
5b12627e14
Auto assign DIAG pins for multi-endstop ( #16723 )
2020-01-30 03:24:57 -06:00
Scott Lahteine
9caf5c05e7
Refactor heater watch, job timer auto-start ( #16725 )
2020-01-30 03:24:43 -06:00
Scott Lahteine
50889c0f94
Move L64XX index_to_axis to progmem ( #16697 )
2020-01-30 03:24:23 -06:00
chgi
99b6a132bc
Fix G60/G61 slots > 8 and compile error ( #16715 )
2020-01-30 03:18:45 -06:00
Radek Pietruszewski
e6a675e6ec
Fix missing string for M48 build ( #16708 )
2020-01-30 03:13:31 -06:00
Mauro
1bc6509d02
Support for E4d@BOX mainboard ( #16716 )
2020-01-30 03:06:17 -06:00
Neskik
1db9d9f76f
Fix probe temp calibration ( #16718 )
2020-01-30 03:00:38 -06:00
0r31
8737c35ded
Fix HAS_FAN macro ( #16717 )
2020-01-29 22:48:26 -06:00
Scott Lahteine
e8ed4329ea
Cleanup of old includes, add comments
2020-01-29 22:41:18 -06:00
thinkyhead
a5f72330fb
[cron] Bump distribution date (2020-01-30)
2020-01-30 00:06:48 +00:00
InsanityAutomation
9bb8176d34
Fix Toolchange (!no_move) return to status ( #16699 )
2020-01-29 00:06:06 -06:00
thinkyhead
9b45f342ee
[cron] Bump distribution date (2020-01-29)
2020-01-29 00:07:02 +00:00
felixstorm
e4eaf32b4d
Prevent SD access from resetting ESP32 ( #16690 )
2020-01-27 18:16:43 -06:00
thinkyhead
0c3cae59d9
[cron] Bump distribution date (2020-01-28)
2020-01-28 00:06:59 +00:00
Jason Smith
131acf304b
Fix Manual Bed Leveling with multiple extruders ( #16688 )
2020-01-27 15:57:21 -06:00
Scott Lahteine
8bd6b60a01
Remove extraneous G60/G61 lines
2020-01-27 15:40:25 -06:00
Hans007a
e2eef1256a
G60/G61 Position Save/Restore ( #16557 )
2020-01-26 23:19:05 -06:00
Robby Candra
a0a93e35ae
Fix serial port redirection (index ≠ port num) ( #16687 )
2020-01-26 22:46:26 -06:00
Scott Lahteine
2325bede8a
Fix Trigorilla 1.4 limit switches
...
See #16612
2020-01-26 21:08:55 -06:00
Scott Lahteine
56cd747c8b
Rename some temperature members
2020-01-26 21:08:55 -06:00
Robby Candra
48098b1675
Preserve CWD for write/remove file ( #16667 )
2020-01-26 18:34:17 -06:00
thinkyhead
f6a6704b66
[cron] Bump distribution date (2020-01-27)
2020-01-27 00:06:35 +00:00
Scott Lahteine
5e3e8fcdb9
Fix PID F menu label
2020-01-26 17:07:18 -06:00
ellensp
0949c0f326
SKR 1.3 sensorless endstops hack ( #16659 )
2020-01-26 03:49:11 -06:00
Giuliano Zaro
81f31efaee
Fix Spanish (swapped BLTouch strings) ( #16637 )
2020-01-26 03:34:58 -06:00
ellensp
c49e987b1e
Fix M43 timer report on AVR ( #16645 )
2020-01-26 03:33:35 -06:00
Roman Moravčík
3572fa22a0
Update Slovak language ( #16646 )
2020-01-26 03:27:08 -06:00
Scott Lahteine
1d1dc8e339
More 8 extruder defines
2020-01-26 03:24:54 -06:00
Scott Lahteine
bbfbcb8a5d
Clean up PID language defines
2020-01-26 03:24:54 -06:00
Jason Smith
44d400db83
Fix HOMING_BACKOFF_MM for DELTA ( #16657 )
2020-01-26 03:16:03 -06:00
ellensp
4a71285c34
Fix Serial defines for M43 on AVR ( #16649 )
2020-01-26 03:05:34 -06:00
Luc
6357619ab2
Add ESP3DLib idletask entry point ( #16658 )
2020-01-26 01:11:30 -06:00
0r31
e3611ad209
Fix MKS Base + Digipot compile error ( #16636 )
2020-01-26 01:08:40 -06:00
Jason Smith
95d5a0c480
Fix DELTA_CALIBRATION_MENU recursive call ( #16656 )
2020-01-26 00:02:06 -06:00
thinkyhead
838a420e27
[cron] Bump distribution date (2020-01-26)
2020-01-26 00:06:19 +00:00
yangwenxiong
248b7dfa59
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans ( #16595 )
2020-01-25 02:13:39 -06:00
Bob Kuhn
0d166f9c7d
Duet Smart Effector support ( #16641 )
2020-01-25 02:00:51 -06:00
Scott Lahteine
86c18ea6e0
Bring configs and drivers.h up to date
2020-01-24 23:17:52 -06:00
Scott Lahteine
b7a67f6f74
Extra debugging for leveling on/off
2020-01-24 23:17:49 -06:00
Scott Lahteine
1c042bbaea
Convert chars only for enabled languages
2020-01-24 15:12:04 -06:00
thinkyhead
899db41a5c
[cron] Bump distribution date (2020-01-24)
2020-01-24 00:07:21 +00:00
thinkyhead
342f65eb8e
[cron] Bump distribution date (2020-01-23)
2020-01-23 00:07:18 +00:00
thinkyhead
fd346c6cd1
[cron] Bump distribution date (2020-01-22)
2020-01-22 00:07:17 +00:00
Ryan
b7f86bffd5
Arc segment radius scaling ( #16551 )
2020-01-21 02:53:26 -06:00
InsanityAutomation
79810b7fcb
G12 defaults per tool. Event G-code for post-toolchange ( #16554 )
2020-01-21 02:51:23 -06:00
Scott Lahteine
84c874c53b
Tweak some config spacing
2020-01-21 02:43:34 -06:00
MaukCC
04d64351a2
Add HMS434 V15 ATSAM board ( #16620 )
2020-01-21 01:10:31 -06:00
Tanguy Pruvot
c8ac908db2
Release UI on G26 priming timeout ( #16449 )
2020-01-21 01:05:55 -06:00
0r31
b57ef4b261
Override for LPC1768 u8g/digipot I2C master ID ( #16622 )
2020-01-20 20:09:16 -06:00
Bob Kuhn
1a5cbc9052
Fix STM401/4xx/STM32F7xx timers, STEVAL_3DP001V1 warning ( #16621 )
2020-01-20 18:33:36 -06:00
thinkyhead
f36225c3e0
[cron] Bump distribution date (2020-01-21)
2020-01-21 00:07:07 +00:00
InsanityAutomation
97b5a5f469
Provide methods for M420 + MBL ( #16602 )
2020-01-20 01:44:36 -06:00
Bob Kuhn
a1f5245e27
L64xx M906 Fix status variable, formatting ( #16597 )
2020-01-20 01:15:00 -06:00
Giuliano Zaro
ef8f829513
Fix CHAMBER_MAXTEMP security margin ( #16600 )
2020-01-20 00:44:51 -06:00
InsanityAutomation
d9cdb4ae19
Move steps/mm out of slim menus ( #16603 )
2020-01-20 00:43:19 -06:00
0r31
451062553e
LPC1768: Allow I2C master channel override ( #16584 )
2020-01-19 23:59:06 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
0r31
f36f084465
Fix Greek language string ( #16601 )
2020-01-19 23:03:19 -06:00
Jason Smith
439e73d79c
AVR sanity check for MONITOR_DRIVER_STATUS with SW Serial ( #16421 )
2020-01-19 22:25:38 -06:00
ellensp
0547d9d651
Reset shutdown timer on M85 ( #16587 )
2020-01-19 22:24:12 -06:00
thisiskeithb
3b34fbd4c4
Update BTT002 pins ( #16591 )
2020-01-19 22:21:32 -06:00
Giuliano Zaro
aec211fc80
SAMD51: ADC for probe temperature compensation ( #16596 )
2020-01-19 22:17:08 -06:00
Bob Kuhn
1084068a3e
Simplify a drivers.h macro ( #16589 )
2020-01-19 20:59:47 -06:00
Scott Lahteine
e9ae585647
Patch for _STEP_INIT
2020-01-19 20:50:33 -06:00
Scott Lahteine
dda76e50a9
Use bool in pin compare
2020-01-19 20:05:53 -06:00
Scott Lahteine
37849969ad
Function-like macros
2020-01-19 20:01:22 -06:00
Scott Lahteine
707349d492
Updates for L64XX
2020-01-19 19:53:12 -06:00
Scott Lahteine
f6a6839a82
Simplify TMC monitor code
2020-01-19 19:29:30 -06:00
Scott Lahteine
79c2f05e7d
Fix M112 with Emergency Parser
2020-01-19 19:00:24 -06:00
thinkyhead
4dca6d50c0
[cron] Bump distribution date (2020-01-20)
2020-01-20 00:06:48 +00:00
thinkyhead
23fc81f1af
[cron] Bump distribution date (2020-01-19)
2020-01-19 00:07:06 +00:00
Scott Lahteine
d035bfb1a9
Allow RRW Keypad with any LCD
2020-01-18 14:48:24 -06:00
thinkyhead
80400ab3f8
[cron] Bump distribution date (2020-01-18)
2020-01-18 00:04:25 +00:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
George Fu
4108c5d01f
Update FYSETC S6 pins ( #16559 )
2020-01-17 13:16:05 -06:00
vivian-ng
e94f782f51
Shared SPI sanity check ( #16581 )
2020-01-17 02:54:22 -06:00
Scott Lahteine
a578749622
Clean up HAL ADC, old test scripts
2020-01-17 02:44:01 -06:00
Bob-the-Kuhn
0d0dfba203
STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. ( #16579 )
2020-01-17 02:44:01 -06:00
thinkyhead
91a399ae7f
[cron] Bump distribution date (2020-01-17)
2020-01-17 00:06:39 +00:00
felixstorm
2b9eb4437b
ESP32 HAL: Fix random pauses during prints ( #16548 )
2020-01-16 05:57:14 -06:00
ellensp
5bd66241df
Fix TOUCH_UI_FTDI_EVE bugs ( #16540 )
2020-01-16 05:50:00 -06:00
Scott Lahteine
1bb1ce7475
Move macros to stepper/indirection
2020-01-16 05:25:16 -06:00
Jason Smith
c305c2cc6b
Fix some warnings, Melzi pins
2020-01-15 19:57:16 -06:00
dagorel
bda4957f9b
Fix I2C address of MCP4728 on LPC176x ( #16578 )
2020-01-15 19:15:54 -06:00
thinkyhead
bc483b2354
[cron] Bump distribution date (2020-01-16)
2020-01-16 00:08:10 +00:00
Dennis
2d7f94cae1
Adjustable ADC debounce delay ( #16264 )
2020-01-15 18:06:03 -06:00
gjdodd
7481563bd9
Nikon IR support for time lapse photos ( #16539 )
2020-01-15 17:59:41 -06:00
Scott Lahteine
b419ca254b
Fix typo
2020-01-15 01:27:32 -06:00
thisiskeithb
7eed008e8e
Use Flash EEPROM on BTT002 ( #16558 )
2020-01-15 01:27:32 -06:00
Bob Kuhn
53dfeed6c0
Steval_3DP001V1 timers, analog inputs, etc. ( #16565 )
2020-01-14 23:19:13 -06:00
Lino Barreca
ef513ef7fb
Fix build error with unsupported reset flags ( #16562 )
2020-01-14 23:19:13 -06:00
Scott Lahteine
ea7363a8f4
Update more configs
2020-01-14 18:48:29 -06:00
thinkyhead
8e1a21cf53
[cron] Bump distribution date (2020-01-15)
2020-01-15 00:08:21 +00:00
InsanityAutomation
ffd8b595d1
Fix PLR cancel with ExtUI ( #16556 )
2020-01-13 20:52:24 -06:00
Scott Lahteine
1457e40208
Make lcd_power_loss_recovery_cancel exportable
2020-01-13 20:25:12 -06:00
Bob Kuhn
1ad53cee1f
Improved STMicro L64XX stepper driver support ( #16452 )
2020-01-13 18:47:30 -06:00
thinkyhead
53f1e5ff5b
[cron] Bump distribution date (2020-01-14)
2020-01-14 00:08:54 +00:00
Scott Lahteine
0e6ef65aec
Clean up whitespace
2020-01-13 16:56:56 -06:00
Bob Kuhn
c4ffe74d71
Add SERVO, TONE timers to variant for better STEVAL_3DP001V1 support ( #16538 )
2020-01-13 00:26:17 -06:00
David Klasinc
55b2af9464
Fix Linux upload path detection ( #16514 )
2020-01-13 00:23:55 -06:00
thinkyhead
fc4a42bbdc
[cron] Bump distribution date (2020-01-13)
2020-01-13 00:08:17 +00:00
thinkyhead
57499291d3
[cron] Bump distribution date (2020-01-12)
2020-01-12 00:10:02 +00:00
Ryan V1
56e51efeea
Use RECIPROCAL macro (not _RECIP) ( #16530 )
2020-01-11 17:16:16 -06:00
Jason Smith
d22eb261cf
Fix probeless delta build ( #16537 )
2020-01-11 17:14:33 -06:00
FlyingSamson
fbf2f36cae
Only constrain motion on homed axes ( #16533 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-01-11 17:06:52 -06:00
thinkyhead
e8941d2bd8
[cron] Bump distribution date (2020-01-11)
2020-01-11 00:08:42 +00:00
Luc
d854c8fa5f
ESP3d integration for ESP32 ( #16515 )
2020-01-10 17:22:41 -06:00
Giuliano Zaro
e9a97127f7
Update Italian language ( #16527 )
2020-01-10 16:19:52 -06:00
Giuliano Zaro
0391e5bcc7
Prevent Z misaligment on tool change ( #16518 )
2020-01-10 16:12:21 -06:00
thinkyhead
d02a867424
[cron] Bump distribution date (2020-01-10)
2020-01-10 20:47:56 +00:00
Acenotass
2d820e6204
Update Russian language ( #16522 )
2020-01-10 13:06:02 -06:00
Tanguy Pruvot
f9f7697b96
Fix Probe Offset XY edit items (et Français) ( #16523 )
2020-01-10 13:04:59 -06:00
InsanityAutomation
409d7378d9
Add Probe Offsets menu ( #16444 )
2020-01-10 00:47:38 -06:00
ellensp
669fe74096
Fix compile error w/out LCD ( #16502 )
2020-01-09 04:51:41 -06:00
Jamie
36d08f8ad3
Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs ( #16510 )
2020-01-09 04:48:00 -06:00
Scott Lahteine
6e658a7c04
Code style and comment tweaks
2020-01-08 20:00:26 -06:00
Scott Lahteine
95046c9047
Extend SERIAL_CHAR to take multiple arguments
2020-01-08 18:36:47 -06:00
thisiskeithb
5beca89412
Add menu item Tune > Advance K ( #16488 )
2020-01-08 17:43:36 -06:00
Alejandro Aguilera
5a5e1d0401
Fix Change Filament menu item with runout ( #16485 )
2020-01-08 16:03:23 -06:00
dagorel
a88b91b3ed
Provide some missing Arduino macros ( #16497 )
2020-01-07 21:56:47 -06:00
Lino Barreca
5c4c052fd7
Fix SKR Pro BLTouch conflicting timers ( #16499 )
2020-01-07 21:54:26 -06:00
Vertabreaker
d26c32375e
Fix EEPROM array size bug ( #16475 )
2020-01-07 21:49:27 -06:00
ellensp
994c695862
Fix MKS_SGEN sanity check ( #16501 )
2020-01-07 21:47:45 -06:00
ManuelMcLure
675295692b
Fix unused var warning ( #16467 )
2020-01-05 02:52:38 -06:00
Tanguy Pruvot
d1e55a2d1d
Remove extra UBL map edit menu item ( #16451 )
2020-01-05 02:25:03 -06:00
Vertabreaker
5e1f0e5e90
Followup to EEPROM patch ( #16470 )
2020-01-05 02:19:50 -06:00
Tanguy Pruvot
bdcccee203
Improve French language (UBL) ( #16453 )
2020-01-05 02:09:27 -06:00
Justin
d70dad6807
Fix permyriad progress bar ( #16460 )
2020-01-05 02:08:24 -06:00
Acenotass
93e35880ce
Update Russian language ( #16461 )
2020-01-05 02:04:28 -06:00
Jamie
9b970cf12f
Add option to invert joystick axes ( #16466 )
2020-01-05 02:01:05 -06:00
Jamie
022b6b9067
Fix M115 cap with EXTRUDERS == 0 ( #16459 )
2020-01-05 01:54:30 -06:00
Jamie
fc07b0ea30
Fix EEPROM error with EXTRUDERS == 0 ( #16464 )
2020-01-05 01:54:30 -06:00
George Fu
e593da1c23
Update and fix DGUS ( #16317 )
2020-01-03 21:00:44 -06:00
greppp
7f87a044cd
Fix Ender-2 display pins, add BTN_ENC ( #16349 )
2020-01-03 20:44:16 -06:00
Vertabreaker
b841b9bd01
Add example configs. Expand custom menu. ( #16286 )
...
- Anet E10
- Geeetech D200
- Geeetech M201
- JGAurora Magic
- MakerFarm Pegasus 12
2020-01-03 20:37:22 -06:00
George Fu
ceeba58dc9
FYSETC F6 v1.4 board support ( #16321 )
2020-01-03 20:29:25 -06:00
Scott Lahteine
aa4db785f2
MSG_WATCH => MSG_INFO_SCREEN
2020-01-03 19:50:55 -06:00
Jason Smith
3cade6245e
Fix MIN_PROBE_EDGE bug in default ABL G29 ( #16367 )
2020-01-03 17:46:26 -06:00
ellensp
d7aee3b7b6
Pins debugging AVR serial pins ( #16437 )
2020-01-03 17:40:56 -06:00
thisiskeithb
64fdc4f24b
BTT002: Add runout, PLR, and RGB pins ( #16442 )
2020-01-03 17:38:15 -06:00
Scott Lahteine
1d0452c41e
Standardize drivers.h values, add class indirection ( #16448 )
2020-01-03 17:11:36 -06:00
Jason Smith
595e684658
Add Leapfrog Xeed 2015 support ( #16400 )
2020-01-02 22:04:13 -06:00
Tanguy Pruvot
cda363a15e
Touch UI: Fix UBL mesh value editing ( #16432 )
2020-01-02 21:26:03 -06:00
ellensp
7a50dbc00d
Add motherboard BIGTREE_SKR_V1.4_TURBO ( #16374 )
2020-01-02 21:15:34 -06:00
InsanityAutomation
d129ac1b37
Z-offset edit precision based on value limits ( #16425 )
2020-01-02 20:40:40 -06:00
Tanguy Pruvot
1ea529b9c1
STM32F1: Fix misleading indent / nullptr on FSMC ( #16431 )
2020-01-02 20:19:07 -06:00
Acenotass
5ffabd56eb
Update Russian language ( #16426 )
2020-01-02 20:17:08 -06:00
Dirk O. Kaar
d0e1166cce
Fix Visual Micro "Arduino IDE for Visual Studio" support ( #16418 )
2020-01-02 19:01:38 -06:00
Scott Lahteine
5b75a018b7
Misc patches preceding DGUS PR
2020-01-02 17:59:38 -06:00
randellhodges
c75b560604
PWM pin not needed for Neopixel brightness / submenu ( #16345 )
2020-01-02 17:50:19 -06:00
Scott Lahteine
a2cda631d9
Clean up trailing whitespace
2020-01-02 16:33:50 -06:00
Jason Smith
9ff2d34bf8
Fix warnings in stepper.cpp ( #16364 )
2020-01-01 22:06:50 -06:00
Jason Smith
92ad973729
Fix some DOGM warnings ( #16363 )
2020-01-01 21:58:16 -06:00
rado79
0be8b22d3c
Add FILAMENT_UNLOAD_PURGE_FEEDRATE ( #16372 )
2020-01-01 21:56:58 -06:00
Jason Smith
4e1f2f89f6
Refactor TMC-related macros and sanity checks ( #16384 )
2020-01-01 21:51:15 -06:00
Lino Barreca
ac32ed74b4
Return from loop() on non-AVR boards ( #16390 )
2020-01-01 21:13:43 -06:00
Alexander Gavrilenko
c6f7ea9f22
MKS Robin ILI9328 TFT support ( #16401 )
2020-01-01 20:55:37 -06:00
Bob Kuhn
747b2b9bf4
Improve STEVAL_3DP001V1 and future STEVAL_* support ( #16404 )
2020-01-01 20:52:56 -06:00
Pascal de Bruijn
23bdc1556d
Permit ENDSTOP_INTERRUPTS_FEATURE on more STM32 ( #16412 )
2020-01-01 20:41:35 -06:00
Giuliano Zaro
47edbd9220
Fix min limit for acc, feed, jerk ( #16416 )
2020-01-01 20:38:33 -06:00
Scott Lahteine
00c83e9ca6
Update comments re: NOZZLE_AS_PROBE
2020-01-01 19:41:23 -06:00
Scott Lahteine
832321f55d
Fix games menu back item, titles
2019-12-31 16:06:16 -06:00
Scott Lahteine
941a09b6ac
Fix Max7219 with 256 or more cels
2019-12-31 16:04:29 -06:00
InsanityAutomation
1c9ccce520
Add NOZZLE_AS_PROBE (no probe offsets) ( #15929 )
2019-12-24 00:03:08 -06:00
petrzjunior
254d352fca
Update Czech language ( #16305 )
2019-12-23 18:14:51 -06:00
Luu Lac
baa101253a
MKS Robin 2 (STM32F407ZE) base support ( #16270 )
2019-12-22 18:16:08 -06:00
ferengi82
2230ef6e09
MKS SGen-L pins EEBF or EFBF scheme ( #16296 )
2019-12-22 17:11:49 -06:00
Luc
24eaf2d7e0
Some ESP32 patches ( #16297 )
2019-12-22 16:11:17 -06:00
randellhodges
f4196d394b
Flash leveling (for some STM32) ( #16174 )
2019-12-22 16:04:09 -06:00
randellhodges
ebdf8b6b1a
Fix STM32 flush of TX (used by UBL) ( #16197 )
2019-12-22 03:08:17 -06:00
FLYmaker
59f9bb2120
Add FLYBOARD (STM32F407ZG) ( #16257 )
2019-12-22 03:05:30 -06:00
Luc
a3d88aebed
Add MRR_ESPA/_ESPE (ESP32) boards ( #16238 )
2019-12-21 18:58:00 -06:00
Jason Smith
d5bc5547ee
Step timing cleanup and rounding fix ( #16258 )
2019-12-21 18:36:25 -06:00
Tanguy Pruvot
f8065da48f
Reset runout.ran_out on resume ( #16230 )
2019-12-21 18:35:35 -06:00
Jason Smith
0d8c81b2a6
Fix axis CS sanity check ( #16271 )
2019-12-20 22:05:42 -06:00
Markus Towara
856013cc0f
Fix planner compile error ( #16272 )
2019-12-20 22:04:49 -06:00
randellhodges
0b6c2d893e
Fix G34 with Z_DUAL_STEPPER_DRIVERS compile ( #16274 )
2019-12-20 22:03:37 -06:00
Jason Smith
2e235aff03
Fix HAL_STM32 + Arduino IDE SoftwareSerial conflict ( #16266 )
2019-12-20 19:14:27 -06:00
Scott Lahteine
87992f3669
Use Github Actions for CI, date bump ( #16269 )
2019-12-20 19:11:53 -06:00
Scott Lahteine
64ebec50dc
Move pins debug condition
2019-12-20 10:19:41 -06:00
Jeff Eberl
70325a6a0f
Update test scripts to error on unknown ( #16229 )
2019-12-19 21:03:42 -06:00
Scott Lahteine
d81de7f521
Tweak sanity checks
2019-12-19 21:02:14 -06:00
Scott Lahteine
deff538909
Fix broken M100_dump_routine
2019-12-19 21:02:14 -06:00
Scott Lahteine
10f7bbee32
Use MYSERIAL0 (not SerialUSB) for Malyan LCD
2019-12-19 19:53:06 -06:00
Scott Lahteine
b49a0e39d5
HOME_USING_SPREADCYCLE is obsolete
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 16:02:57 -06:00
Scott Lahteine
53f77dfadf
Remove obsolete TMC2209 comment
2019-12-19 15:56:52 -06:00
Scott Lahteine
937dca4432
Followup to TMC2209 spreadcycle patch
2019-12-19 15:54:44 -06:00
BigTreeTech
bbe0ffb2fa
BigTreeTech SKR v1.4 support ( #16236 )
2019-12-19 02:41:35 -06:00
Jason Smith
1bad8f1b17
Improve pulse timing and step reliability ( #16128 )
2019-12-19 02:38:48 -06:00
Mario Costa
5f06f42ccd
Spindle/Laser pins for RADDS ( #16119 )
2019-12-19 02:37:07 -06:00
elementfoundry
e5edbf9d35
Allow TMC2209 to save/restore spreadCycle ( #16153 )
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 02:23:54 -06:00
Scott Lahteine
865071a946
Tweak code formatting
2019-12-19 02:16:17 -06:00
Moshi Binyamini
dcdaa2025f
Sanity-check Z_STEPPER_AUTO_ALIGN coordinates ( #16231 )
2019-12-19 00:59:01 -06:00
Scott Lahteine
0400783444
Tweak G34, fix a declaration
2019-12-19 00:42:39 -06:00
Scott Lahteine
768a1d2713
[cron] Bump distribution date
2019-12-19 00:39:55 -06:00
Scott Lahteine
262ff9584c
[cron] Bump distribution date
2019-12-16 00:00:04 -06:00
Scott Lahteine
af4c62b422
Update product links
2019-12-15 20:58:31 -06:00
Vertabreaker
e0c71344ed
Define more FAN pins for GT2560 ( #16235 )
2019-12-15 20:28:55 -06:00
chzj333
42a336f8bc
Update BTT002 platform (fixing SD init) ( #16217 )
2019-12-15 12:24:54 -06:00
Tanguy Pruvot
a0badf572e
STM32 Touch UI timings, Longer onboard pullups ( #16219 )
2019-12-15 12:03:39 -06:00
thisiskeithb
a358b72ec8
Add SKR Mini E3 + Zonestar LCD warning ( #16214 )
2019-12-15 12:02:20 -06:00
danym21
6e8dcba698
Fix G28 debug line, M569 calls ( #16213 )
2019-12-15 12:00:00 -06:00
Luc
9d6b2ebf50
Improve ESP32 HAL (EEPROM, watchdog) ( #16228 )
2019-12-15 11:39:39 -06:00
thisiskeithb
dc8d8cb39c
Fix MKS SGen-L SD detect pin ( #16224 )
2019-12-15 11:25:07 -06:00
Luu Lac
509e1ab053
TOUCH_MI_DEPLOY_XPOS fallback to X_MIN_POS ( #16226 )
2019-12-15 11:21:39 -06:00
Luu Lac
e9dadacf7b
Fix bad #ifdef ( #16227 )
2019-12-15 11:16:36 -06:00
Scott Lahteine
6a514a1e8e
Move status screen defines
2019-12-12 22:20:03 -06:00
Scott Lahteine
303ddb862a
Tweak some config names
2019-12-12 22:18:04 -06:00
Scott Lahteine
f3d64b7115
Cardreader read/write open methods
2019-12-12 18:46:49 -06:00
Bo Herrmannsen
98382fcea5
Include Z in SCARA steps feedrate ( #16193 )
2019-12-12 17:13:49 -06:00
iain MacDonnell
629c039eed
Update M503 MBL G29 report ( #16199 )
2019-12-12 16:54:54 -06:00
randellhodges
2a7f1091ce
Fix compile error (macro substitution typo) ( #16194 )
2019-12-12 16:51:35 -06:00
Anders Sahlman
3d4aa015a8
Add MKS Robin Mini EEPROM defines ( #16203 )
2019-12-12 16:35:46 -06:00
InsanityAutomation
7b512742f4
Tweak ExtUI Probeless Babystepping ( #16177 )
2019-12-12 15:51:56 -06:00
ManuelMcLure
b065a60dd0
Onboard (always-on) pullups support ( #16144 )
2019-12-12 15:49:14 -06:00
thisiskeithb
98814e1c47
MKS 12864 OLED pins for SGEN-L ( #16188 )
2019-12-11 02:18:21 -06:00
André Kjellstrup
c2342c3528
Use error message !! hints ( #16145 )
2019-12-11 01:46:11 -06:00
MangaValk
96cf556139
Fix multiple servos with STM32 ( #16151 )
2019-12-11 01:44:05 -06:00
MS1987
31fdaea269
Add MKS Robin Pro, MKS Robin Lite3 ( #16163 )
2019-12-11 00:23:47 -06:00
Scott Lahteine
1c48817a47
[cron] Bump distribution date
2019-12-11 00:00:04 -06:00
Scott Lahteine
0d52eaa875
Superscript 3 for mm3
2019-12-10 23:45:39 -06:00
Tanguy Pruvot
5ebef425ce
Update french (objects, retract...)
2019-12-10 23:45:39 -06:00
Giuliano Zaro
5dfa152ba2
Update Italian language ( #16147 )
2019-12-10 23:38:14 -06:00
dagorel
1c4f672eae
Formalize DAC percent strings ( #16176 )
2019-12-10 23:37:25 -06:00
Anders Sahlman
1bcd47e65f
Correct MKS Robin Mini pins ( #16178 )
2019-12-10 23:32:11 -06:00
Antti Andreimann
1465fc0632
Fix controller and SD on Robin Nano ( #16187 )
2019-12-10 23:29:33 -06:00
Scott Lahteine
07a61057ba
[cron] Bump distribution date
2019-12-10 00:11:19 -06:00
Scott Lahteine
bb5717c5b3
[cron] Bump distribution date
2019-12-07 00:00:05 -06:00
Luu Lac
f3155af444
Update AZSMZ LCD link ( #16106 )
2019-12-06 01:35:06 -06:00
Tanguy Pruvot
ab61c09bff
Improve touch buttons behavior ( #16109 )
2019-12-06 00:47:50 -06:00
Antti Andreimann
b65ab21733
Fix compile error with disabled PIDTEMP ( #16108 )
2019-12-05 20:51:41 -06:00
randellhodges
7f8ca85e69
STM32F1 Flash-based EEPROM fixes ( #16118 )
2019-12-05 20:48:11 -06:00
Scott Lahteine
f64649933f
[cron] Bump distribution date
2019-12-04 01:57:33 -06:00
ManuelMcLure
68da497f35
Remove debug_out.h '#pragma once' (again) ( #16098 )
2019-12-04 01:29:02 -06:00
Vertabreaker
0832a60db3
EXP3D Imprimante Multifonction ( #16079 )
2019-12-03 06:52:38 -06:00
ellensp
cb4cd76086
Fix TMC_SW_MOSI for BTT_SKR_MINI_V1.1 ( #16081 )
2019-12-03 06:44:36 -06:00
Scott Lahteine
6134bff81b
Expand environments in platformio.ini
2019-12-02 21:19:23 -06:00
Scott Lahteine
b2c670fd94
[cron] Bump distribution date
2019-12-02 00:00:04 -06:00
Scott Lahteine
cb7817093f
More serial macro cleanup
2019-12-01 22:23:36 -06:00
Scott Lahteine
9114a14eca
Fix commas in EEPROM code
2019-12-01 21:59:58 -06:00
Vertabreaker
3874f4a097
Geeetech A30 / GTM32 support ( #16071 )
2019-12-01 21:25:45 -06:00
Luu Lac
01e4b0c067
Add Laser / Spindle bitmap for LCD ( #16068 )
2019-12-01 21:20:15 -06:00
Scott Lahteine
3dc49fd1c6
Split up hotend / bed drawing
2019-12-01 20:52:59 -06:00
InsanityAutomation
7126a5e5a7
Add Host Prompt Notification Method ( #15942 )
2019-12-01 17:39:28 -06:00
ManuelMcLure
c061656659
Use PSU powerup delay for all powerups ( #16065 )
2019-12-01 17:36:49 -06:00
Scott Lahteine
25a7ceabdb
Fix missing step_current_down semicolons
2019-12-01 17:30:22 -06:00
Scott Lahteine
9b6d2da9bf
Fix debug out macros
2019-12-01 17:28:18 -06:00
Scott Lahteine
4718b8ad02
Add _P variants to debug_out
2019-12-01 13:32:32 -06:00
Felicia Hummel
6c2438deae
Fix PSU_POWERUP_DELAY compile error ( #16064 )
2019-12-01 12:55:28 -06:00
brian park
b258cc85bf
Mostly Printed SCARA (MPSCARA) support ( #15573 )
2019-11-30 08:57:34 -06:00
hammerhead2k2
19f840a9b5
BTT SKR 1.3 pins for Anet Full Graphics LCD ( #16047 )
2019-11-30 08:21:54 -06:00
Scott Lahteine
83a4e8559c
Followup to "optimize common strings"
2019-11-30 08:18:23 -06:00
InsanityAutomation
b24b0f385f
Add ExtUI Flow Rate method ( #16048 )
2019-11-30 07:23:53 -06:00
Felicia Hummel
690ed531b6
Configurable PSU power-on delay ( #16050 )
2019-11-30 07:17:24 -06:00
Scott Lahteine
27943f9e31
Multiple axis TMC OTPW step down ( #16044 )
2019-11-30 06:59:44 -06:00
Scott Lahteine
1ee648ecd2
Followup to "optimize common strings"
2019-11-30 06:55:32 -06:00
Scott Lahteine
0138c0b55b
[cron] Bump distribution date
2019-11-30 00:00:04 -06:00
Scott Lahteine
f83bc0aa13
Optimize common strings
...
Saves 128 bytes in testing with `mftest mega 1 -y`
2019-11-29 22:54:42 -06:00
Scott Lahteine
2d74c2042a
Clean up whitespace, GTM32 pins
2019-11-29 20:05:32 -06:00
Chris Pepper
e585c37d7d
Fix #16038
2019-11-29 16:44:11 +00:00
Vertabreaker
1803f672f8
Pins for GTM32 board variants ( #16020 )
2019-11-29 07:12:49 -06:00
BigTreeTech
441ee3e53f
Add 'M114 E' to get E position (M114_DETAIL) ( #16026 )
2019-11-29 06:53:32 -06:00
Chris Pepper
a63491e6eb
Sanity check ADC pins and FAST_PWM_FAN with Servos ( #16038 )
2019-11-29 06:52:28 -06:00
Bob
0f2ee414db
Update thermistornames.h ( #16027 )
2019-11-29 02:06:11 -06:00
Scott Lahteine
0f14e0e978
[cron] Bump distribution date
2019-11-29 00:00:06 -06:00
Bob
5a98c83eef
Use MAX6675 SPI pins for MAX31865 over SPI pins ( #16024 )
2019-11-27 01:45:03 -06:00
Jason Smith
752a1e76ab
Float ABL mesh boundaries, no probe position rounding ( #16018 )
2019-11-27 01:29:25 -06:00
Jason Smith
ce9a4afe95
Better ST7920 timings for FYSETC S6 ( #16022 )
2019-11-27 01:26:21 -06:00
Scott Lahteine
289c5dcccb
Fix boot screen sanity check
2019-11-27 01:10:23 -06:00
Scott Lahteine
98f83dc756
Add comments to G29
2019-11-27 01:05:22 -06:00
Dirk O. Kaar
0550f30790
Renkforce configuration updates ( #16017 )
2019-11-26 20:22:17 -06:00
Scott Lahteine
077eeaa0f4
Fix mixing extruder feedrate ( #15905 )
2019-11-26 18:03:59 -06:00
Vertabreaker
12417d087b
E2 pins for GT 2560 v3 ( #16016 )
2019-11-26 17:43:27 -06:00
timeburn
a5a143f944
Include host_actions.h in G34 ( #16014 )
2019-11-26 16:38:41 -06:00
George Fu
cf1e19d167
Fysetc S6 support ( #15850 )
2019-11-26 16:15:03 -06:00
Dirk O. Kaar
1cea1687f3
Renkforce RF100 (V1), V2, XL, and XL Plus ( #15695 )
2019-11-26 14:06:23 -06:00
thisiskeithb
f786cc5145
Revert default BTT STM32F103 environment ( #16006 )
2019-11-26 04:28:13 -06:00
madmattco
049e8d5963
Add VAKE / VAKE403D support ( #15631 )
2019-11-26 04:00:59 -06:00
Heilig Benedek
993802c404
Fix Ender 2 display SCK, BTN_ENC pins ( #15997 )
2019-11-26 03:48:21 -06:00
haschtl
ff6518c0a8
Add PID_FAN_SCALING option ( #15585 )
2019-11-26 03:34:43 -06:00
lukasmatena
8ccfdaca02
Add M220 B/R with PRUSA_MMU2 ( #15739 )
2019-11-26 03:34:18 -06:00
Chris Pepper
c1aac3a0c9
Fix delta_mm.e with zero extruders ( #15996 )
2019-11-26 02:58:17 -06:00
Marcio T
43d0391d82
Fix Touch UI message strings ( #16004 )
2019-11-26 02:56:25 -06:00
Robby Candra
fc9f8d27eb
Fix Progress / Remaining display on DOGM ( #16005 )
2019-11-26 02:55:22 -06:00
Jason Smith
d0282e5ba8
Allow slop in position_is_reachable for delta ( #16003 )
2019-11-26 02:53:28 -06:00
Scott Lahteine
1d150e41b6
Reduce MMU2 code, add test
2019-11-26 02:15:31 -06:00
Robby Candra
55595d444d
Use LCD_WIDTH for indexed string ( #15979 )
2019-11-24 19:06:23 -06:00
InsanityAutomation
2142beb2e5
Fix UI compile error in UBL ( #15981 )
2019-11-24 17:04:19 -06:00
Jason Smith
c497a491f4
Fix a PID_EXTRUSION_SCALING menu item ( #15988 )
2019-11-24 17:01:14 -06:00
Scott Lahteine
b11551c767
Touch UI updates for Cocoa Press ( #15986 )
2019-11-24 06:08:05 -06:00
Scott Lahteine
441e822fb3
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 17:04:17 -06:00
Scott Lahteine
47c19aa2b3
Clean up probe accessors
2019-11-23 17:02:04 -06:00
pfillion42
4a5dee6356
(SKR 1.3) Assign DIAG pins for homing dir ( #15972 )
2019-11-23 16:20:13 -06:00
Denis Semenov
0fcd1f4a49
Fix HAS_CLASSIC_E_JERK and related issues ( #15968 )
2019-11-23 15:56:07 -06:00
Scott Lahteine
8f09d2e790
Add STM32F103RE_bigtree to Auto Build
2019-11-22 16:47:31 -06:00
Gustavo Alvarez
b2a275891c
Support RET6 in BTT SKR Mini ( #15957 )
2019-11-21 05:09:01 -06:00
Scott Lahteine
bdd366b97c
Update sensor -5 label
2019-11-21 04:57:57 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Jason Smith
4ede13e36a
Fix G29 for updated meshCount type ( #15960 )
2019-11-21 03:19:56 -06:00
Bob
751cd1f533
MAX31865 temperature sensor ( #15930 )
2019-11-21 03:15:10 -06:00
Scott Lahteine
47e4e5f1db
Update thermocouple comments
2019-11-20 23:51:51 -06:00
Roman Moravčík
5681017d0c
Update Slovak language ( #15953 )
2019-11-20 17:41:14 -06:00
BigTreeTech
ab8b24fdba
Power Loss Recovery with a UPS ( #15943 )
2019-11-20 17:40:21 -06:00
Scott Lahteine
ab9f0f2c4f
Followup to meshCount patch
2019-11-20 04:57:04 -06:00
InsanityAutomation
e81b946f06
Better singlenozzle stored fan speed menus ( #15921 )
2019-11-20 00:14:56 -06:00
Daniel Negut
a3229b30ec
Add Zonestar/Anet LCD for SKR mini E3 ( #15931 )
2019-11-20 00:06:26 -06:00
InsanityAutomation
798f34abcd
Float XY probe offset followup (probe edge) ( #15928 )
2019-11-19 23:29:52 -06:00
Giuliano Zaro
31e329f143
Update Italian language ( #15925 )
2019-11-19 23:27:53 -06:00
Jason Smith
9906e96ffb
Allow UBL G29 J1 with PAUSE_BEFORE_DEPLOY_STOW ( #15934 )
2019-11-19 23:26:38 -06:00
Evgeny-SPB
7116a8645c
G34 logic / typo fix ( #15938 )
2019-11-19 23:25:07 -06:00
Giuliano Zaro
aa89bb71f9
Fix MMU2 compile error ( #15923 )
2019-11-19 23:22:02 -06:00
TheAssassin
814d908a8a
Ender-2 LCD on BTT SKR E3 ( #15924 )
2019-11-19 23:21:27 -06:00
InsanityAutomation
4d4e692c81
Match onMeshUpdate() index sign ( #15920 )
2019-11-19 23:16:43 -06:00
Luu Lac
4d9a5fef3b
Update Vietnamese language ( #15940 )
2019-11-19 21:08:47 -06:00
Scott Lahteine
865055e07a
[cron] Bump distribution date
2019-11-18 00:00:08 -06:00
Scott Lahteine
2bd6dc02d6
[cron] Bump distribution date
2019-11-17 00:00:06 -06:00
Robby Candra
40bbe58371
Use lcd_uint_t in lcd_put_u8str_ind_P ( #15909 )
2019-11-16 16:37:21 -06:00
Roxy-3D
f19fa64e98
Eliminate multiple settings to extruder_duplication_enabled in G28
...
If the IDEX mode was previously set (via GCode or the LCD Panel) to a duplication mode... It was lost after a G28 due to this redundant setting of 'extruder_duplication_enabled'.
It is very important to the various use cases of IDEX machines that extruder_duplication_enabled is preserved across a G28. The reason is this allows a person to use the LCD Panel to put the machine into a duplication mode, and then send a 'normal' part file to the printer and get two parts out of the process.
2019-11-15 15:42:01 -06:00
thisiskeithb
0f57818f2d
Support 512K "RCT6" in BTT SKR Mini ( #15890 )
2019-11-15 02:51:26 -06:00
Scott Lahteine
aa93e1f21a
Update TMC_ADV examples
2019-11-15 02:15:10 -06:00
Scott Lahteine
27cb4db80e
Reduced string storage using tokens ( #15593 )
2019-11-14 20:30:30 -06:00
Lino Barreca
bd321d4b7c
Don't compile STM32 SoftwareSerial unless STM32 ( #15894 )
2019-11-14 05:21:23 -06:00
Scott Lahteine
ac2d7ab14c
Fix timers.h include
2019-11-14 04:47:53 -06:00
Scott Lahteine
a022defe06
[cron] Bump distribution date
2019-11-14 00:00:12 -06:00
Scott Lahteine
3f4636e916
"nozzle_to_probe_offset" is obsolete
2019-11-13 03:07:54 -06:00
Scott Lahteine
602ca5dea6
No USE_M73_REMAINING_TIME without LCD_SET_PROGRESS_MANUALLY
2019-11-13 02:07:17 -06:00
Robby Candra
fcfde7c2f5
Only assign CS/RX/TX on extra axes with SPI/UART ( #15886 )
2019-11-13 02:03:34 -06:00
Scott Lahteine
a4709ba765
Store unscaled PID values in EEPROM ( #15884 )
2019-11-13 01:47:46 -06:00
Scott Lahteine
7e9c846ec3
Modify comment for unlimited E steppers
2019-11-13 01:45:50 -06:00
Jason Smith
9fd35c84ce
SoftwareSerialM for SKR STM32F1 boards ( #15875 )
2019-11-12 22:16:54 -06:00
Jamie
32028902c3
Use max feedrate for joystick motion ( #15870 )
2019-11-12 21:01:04 -06:00
Giuliano Zaro
bb93ea1be4
[SAMD51] Activate ADCs oversampled 12bits ( #15874 )
2019-11-12 20:59:17 -06:00
Roman Moravčík
e110f5abce
M73 R : Set Remaining Time ( #15549 )
2019-11-12 19:36:54 -06:00
Lino Barreca
ac71cdc265
New HardwareTimer for STM32 5.7.0 ( #15655 )
2019-11-12 19:23:02 -06:00
Chris Pepper
4762dfe797
Fix lpc u8g i2c ( #15876 )
2019-11-12 01:59:36 +00:00
Chris Pepper
af61f37b65
Update lpc176x requirements ( #15869 )
2019-11-11 03:25:56 +00:00
ManuelMcLure
b9703fdf36
Ensure TMC + LIN_ADVANCE pulse length ( #15807 )
2019-11-10 19:04:28 -06:00
Scott Lahteine
5e5045c4ee
Touch UI finishing touches
2019-11-10 18:52:53 -06:00
Marcio Teixeira
5639b8ca20
Touch UI fixes for Cocoa Press ( #15847 )
2019-11-10 18:49:41 -06:00
danym21
28e1614c2e
Add Sensorless Homing current ( #15690 )
2019-11-10 18:45:06 -06:00
Chris Pepper
86d0bc1af5
Update lpc176x framework version requirement ( #15868 )
2019-11-10 23:30:28 +00:00
LinFor
48b7a1e66e
Allow non-zero "fan off" PWM value ( #15709 )
2019-11-10 16:33:56 -06:00
Jason Smith
770adcfa15
Raise Z before homing X/Y on unknown Z ( #15859 )
2019-11-10 16:21:20 -06:00
Scott Lahteine
624336f453
Fix up Megatronics 3.2 test
2019-11-10 16:19:57 -06:00
ellensp
7b29c60c46
Fix compile with chamber enabled ( #15862 )
2019-11-10 16:15:08 -06:00
Scott Lahteine
534f2d69c1
[cron] Bump distribution date
2019-11-10 00:00:04 -06:00
Jademalo
37874a6472
Fix E0_SERIAL_RX_PIN typo ( #15841 )
2019-11-09 22:51:20 -06:00
Marcelo Cerri
b9d351899a
Update SKR mini E3 1.2 Filament Runout pin ( #15843 )
2019-11-09 22:49:33 -06:00
Scott Lahteine
7010f92c4b
Board-based LCD delays
2019-11-09 22:33:38 -06:00
Scott Lahteine
9ca25118d0
Whitespace cleanup
2019-11-09 21:17:52 -06:00
Jason Smith
b3f81eead5
Fix/improve TURBO_BACK_MENU_ITEM ( #15856 )
2019-11-09 19:27:30 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro ( #15829 )
2019-11-09 17:59:04 -06:00
Scott Lahteine
8061836e74
Fix Lulzbot tag 30: "Heaters Off"
2019-11-08 03:57:34 -06:00
Scott Lahteine
249f600ceb
[cron] Bump distribution date
2019-11-08 00:00:03 -06:00
Marvin Sinister
8d157a4520
Fix MKS MINI12864 on SKR 1.3 ( #15836 )
2019-11-07 19:39:08 -06:00
Luu Lac
ed6bbe012b
Fix incomplete 'Homing XYZ' screen draw ( #15830 )
2019-11-07 19:14:02 -06:00
AnHardt
4db68d704f
Update Display Throttling ( #15837 )
2019-11-07 19:04:19 -06:00
Scott Lahteine
bb5b1e19b0
Function-style stepper macros
2019-11-07 17:14:36 -06:00
thisiskeithb
47805e18f8
Makefile catch-up ( #15823 )
2019-11-07 02:14:40 -06:00
Scott Lahteine
0be9fdb455
Move single-use to lambdas
2019-11-07 00:28:33 -06:00
Scott Lahteine
84ce3a6bea
LCD corner screen handler lambda
2019-11-07 00:24:16 -06:00
Scott Lahteine
711703dcd1
[cron] Bump distribution date
2019-11-07 00:00:06 -06:00
LinFor
a84e3d1b80
Use native ADC resolution where possible ( #15719 )
2019-11-06 17:49:17 -06:00
Miroslav Šustek
9201197878
Fix SKR E3 board BLTOUCH + SPEAKER timer conflict ( #15781 )
2019-11-06 17:34:29 -06:00
Jason Smith
814a2eaf8f
Allow TMC baud rate override ( #15773 )
2019-11-06 17:08:12 -06:00
teemuatlut
d9b0b964be
Fix TMC2208 HW Serial constructor ( #15782 )
2019-11-06 16:57:48 -06:00
Axel
786617e375
Fix RAMPS + VIKI i2c ( #15811 )
2019-11-06 16:52:28 -06:00
Scott Lahteine
e6dfc991ae
Patch tabs, heater led tests
2019-11-06 16:28:36 -06:00
Scott Lahteine
a89f4703df
Tweak permissions
2019-11-06 16:10:14 -06:00
Roman Moravčík
41b5d720e2
Fix filament Change heading on LCD ( #15783 )
2019-11-06 15:58:06 -06:00
Luu Lac
4ee3502c8f
Fix "confused intellisense" ( #15817 )
2019-11-06 15:54:09 -06:00
Scott Lahteine
f5b5b9e8ec
Bring filament menu up to speed
2019-11-05 17:16:12 -06:00
ellensp
f088c6a850
Add MKS_GEN_L_V2 controller support ( #15793 )
2019-11-04 16:31:27 -06:00
aleknest
cf87d3c700
More compatible uint8_t for Experimental i2c Bus buffer ( #15788 )
2019-11-04 16:28:16 -06:00
Scott Lahteine
e9805a0bcb
Go to previous menu on object cancel
2019-11-04 16:13:10 -06:00
Scott Lahteine
51fd226a4d
Unconfuse intellisense
2019-11-04 15:40:56 -06:00
Scott Lahteine
d80ef43c19
Followup to es int patch
2019-11-04 15:40:45 -06:00
Giuliano Zaro
35cd545106
Use prior endstop pin-to-interrupt macros ( #15771 )
2019-11-04 15:24:41 -06:00
Scott Lahteine
328ddda654
Clean up whitespace
2019-11-04 13:23:26 -06:00
Scott Lahteine
55991962be
Patch extra axis MS pins for debugging
2019-11-04 12:28:10 -06:00
Chris Pepper
b9116d4050
LPC176x Framework update ( #15722 )
...
Changes required for compatibility with framework-arduino-lpc176x 0.2.0
2019-11-03 02:34:09 +00:00
Scott Lahteine
15f94e5ee5
Add NUL_STR global
2019-11-02 07:31:07 -05:00
Scott Lahteine
ea3217cd46
Move 'draw' methods into Menu Item classes ( #15760 )
2019-11-02 07:28:20 -05:00
ManuelMcLure
76b861d759
Fix kill screen with null string ( #15747 )
2019-11-02 07:13:42 -05:00
Robby Candra
7360e9343a
Minor DOGM status screen fix ( #15746 )
2019-11-02 07:04:31 -05:00
Robby Candra
bdb452ed81
Fix missing % on DOGM Status Screen ( #15748 )
2019-11-02 07:01:50 -05:00
Giuliano Zaro
65ef774e8d
Fix mega Port J endstop interrupts ( #15758 )
2019-11-02 06:59:38 -05:00
Scott Lahteine
a920b10483
Fix true/false redefined warnings
2019-11-02 06:04:28 -05:00
Scott Lahteine
ed8f1ca9cf
Revert Cortex delay for now
2019-11-02 04:12:18 -05:00
Scott Lahteine
ca6d00b862
Save some string flash
2019-11-02 00:48:05 -05:00
Scott Lahteine
23d21dd81c
Tweak lambdas
2019-11-02 00:05:23 -05:00
Scott Lahteine
a7d7f36871
[cron] Bump distribution date
2019-11-02 00:00:05 -05:00
Scott Lahteine
93db4f4535
Tweak backtrace.cpp include
2019-11-01 22:08:33 -05:00
Scott Lahteine
f0d952d33a
Cortex M3-M7 can use DWT->CYCCNT ( #15762 )
...
Suggested by Alex Kenis at https://youtu.be/ZfyPcdhQnAA?t=502
2019-11-01 22:07:51 -05:00
Scott Lahteine
ad28da7eb4
Patch ABL G29 loop
...
Followup to e3ddf6e81a
2019-11-01 15:39:05 -05:00
Scott Lahteine
288af0ddf6
Whitespace
2019-11-01 15:39:05 -05:00
Scott Lahteine
e7d9db284e
Followup to M240 patch
2019-10-31 17:27:19 -05:00
Raúl Lázaro Sánchez
7c60853219
Fix blocking delay in Photo G-code M240 ( #15728 )
2019-10-31 17:14:11 -05:00
The-Force
c6f694a247
Power Loss Recovery for volumetric extrusion ( #15734 )
2019-10-31 14:09:37 -05:00
Scott Lahteine
4e6e02bc3e
Include pause.h for M701-702
2019-10-31 13:18:50 -05:00
Scott Lahteine
e3ddf6e81a
Fix meshCount signed-ness
2019-10-31 13:18:50 -05:00
Scott Lahteine
899e0fcdbb
[cron] Bump distribution date
2019-10-31 00:00:07 -05:00
Scott Lahteine
35b1149d96
Patch es int tests for Arduino 1.8.10
2019-10-30 15:52:02 -05:00
Scott Lahteine
c80eda073f
M119 => report_states
2019-10-30 15:24:10 -05:00
LinFor
7d24f152d8
Fix a typo breaking the build ( #15726 )
2019-10-30 15:10:08 -05:00
Scott Lahteine
61225e685d
Abort SD followup
2019-10-29 17:04:49 -05:00
Scott Lahteine
d5c1c72a76
Tweak CW/CCW bitmaps
2019-10-29 16:53:07 -05:00
Scott Lahteine
aaf018e5a0
Language changes
2019-10-29 16:20:35 -05:00
Scott Lahteine
583fc4ee2a
Move abortSDPrinting with others
2019-10-29 16:00:28 -05:00
Scott Lahteine
c5713b5e98
Clean Endstops::event_handler
2019-10-29 15:58:26 -05:00
Scott Lahteine
be498d6280
[cron] Bump distribution date
2019-10-29 00:00:05 -05:00
Aurawin
b09b469dd5
Add BIQU TANGO V1 support ( #15682 )
2019-10-28 18:21:59 -05:00
studiodyne
319e2b5760
Fan menus fix. FR cosmetic change. ( #15714 )
2019-10-28 16:49:31 -05:00
studiodyne
f139642e0f
XY/Z Babystep Multiplicators ( #15691 )
2019-10-28 16:44:17 -05:00
Scott Lahteine
ade76e53de
Fix A10M/A20M mixer display
...
Co-Authored-By: 3Dangel <3dangel@users.noreply.github.com>
2019-10-28 16:26:54 -05:00
InsanityAutomation
cc4d3a215e
Fix ExtUI UBL method calls ( #15704 )
2019-10-28 15:50:27 -05:00
InsanityAutomation
d4f5821cd6
Fix 3-point sanity check ( #15696 )
2019-10-28 15:46:59 -05:00
Scott Lahteine
9aff30da0c
Confirm object cancellation ( #15660 )
2019-10-27 19:50:21 -05:00
Scott Lahteine
78899fc241
Followup to E Total
2019-10-27 18:40:33 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print ( #15703 )
2019-10-27 17:49:27 -05:00
Scott Lahteine
0f8c3ed29a
Prevent extra "too long/cold" errors
2019-10-27 17:40:07 -05:00
Scott Lahteine
9720d21301
Clean up trailing whitespace
2019-10-27 15:32:29 -05:00
Scott Lahteine
9e8021d6a4
Fix pins debug of CS/MS pins
2019-10-26 18:46:39 -05:00
Scott Lahteine
ab0fe1a7dd
Tweak G29 faux point
2019-10-26 14:41:54 -05:00
Giuliano Zaro
6fd13879ae
Update Italian language ( #15676 )
2019-10-26 12:54:59 -05:00
Scott Lahteine
600429a067
Cancel Objects followup
2019-10-25 20:08:45 -05:00
Roman Moravčík
e690471739
Print startup message after print statistics are loaded ( #15664 )
2019-10-25 19:46:56 -05:00
Scott Lahteine
732bf89878
Get 'cancelable' for gcode.cpp
2019-10-25 19:38:23 -05:00
Tanguy Pruvot
c58cc113dd
MKS Robin: restore the TFT v2.0 support (ST7789V) ( #15675 )
2019-10-25 19:30:43 -05:00
Scott Lahteine
014b739bac
Fix M486 int parameters
2019-10-25 19:19:33 -05:00
Scott Lahteine
f8ad15fde8
Rename BOARD_STM32F4 to fix use with MB()
2019-10-25 18:12:29 -05:00
Scott Lahteine
408751d5e0
Fix CANCEL_OBJECTS missing include
2019-10-25 15:45:55 -05:00
Evgeny Zyatkov
12a244f24f
Fix #endif typo ( #15661 )
2019-10-25 12:27:23 -05:00
Scott Lahteine
f12285015a
[cron] Bump distribution date
2019-10-25 12:18:21 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 ( #15590 )
2019-10-24 15:35:40 -05:00
Marcio T
f6a799c7b3
Allow compile under Windows Subsystem for Linux ( #15606 )
2019-10-24 14:57:20 -05:00
InsanityAutomation
82fb046013
Allow suicide pin inverting ( #15586 )
2019-10-24 14:07:28 -05:00
Scott Lahteine
2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time ( #15578 )
2019-10-24 14:00:59 -05:00
Scott Lahteine
464d98d178
Short time prefixes, no percent prefix
2019-10-24 14:00:32 -05:00
Scott Lahteine
ccf61eca84
Fix diplay elaspsed
2019-10-24 13:48:27 -05:00
