Commit graph

143 commits

Author SHA1 Message Date
Scott Lahteine 2212da453a
Distinguish between analog/digital auto fans (#13298) 2019-03-05 00:41:31 -06:00
Scott Lahteine fa236e9718 General cleanup ahead of L64XX 2019-03-01 19:58:07 -06:00
Scott Lahteine 2c10222e87 card.transfer_port => transfer_port_index 2019-02-27 20:14:17 -06:00
Chris Pepper 4ab433d391 Fix binary protocol with one serial port (#13270)
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
2019-02-27 19:57:48 -06:00
Scott Lahteine e15354e387
Simplify serial port redirect (#13234) 2019-02-23 22:53:01 -06:00
Scott Lahteine 3a1b6fe8c1 Coding standards 2019-02-19 14:58:39 -06:00
Scott Lahteine c2b90c44e4 Prettify some code comments 2019-02-12 17:43:37 -06:00
Scott Lahteine 0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine ce563d7c2e Various general cleanups
Mostly from the L6470-oriented PR
2019-01-19 16:56:12 -06:00
Scott Lahteine 712e23c383 Fix up some whitespace 2019-01-17 18:05:36 -06:00
InsanityAutomation a403d9a50c Improve menu pause / resume (#12876) 2019-01-11 20:42:11 -06:00
Scott Lahteine fb8111553e getStatus => report_status 2019-01-11 19:51:00 -06:00
jmz52 d372e7e477 SDIO support for STM32F1 (#12782) 2019-01-04 13:38:07 -06:00
Marcio Teixeira 60cb36bef3 Misc. improvements (#12747)
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
Scott Lahteine 18fedafbc5 Refresh screen on SD Init 2018-12-08 15:31:59 -06:00
Scott Lahteine c986239837
A single SERIAL_ECHO macro type (#12557) 2018-11-29 16:58:58 -06:00
Scott Lahteine 03ef2d6c82
Fix "paused" message and M125 called by M25 (#12551) 2018-11-28 19:28:31 -06:00
Ludy e98d195901 Remove extra declarations in cardreader.cpp (#12520) 2018-11-23 15:58:20 -06:00
Scott Lahteine 643e0066a0 Followup to #12451 2018-11-20 06:27:19 -06:00
Marcio Teixeira c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 2018-11-17 22:21:44 -06:00
Scott Lahteine 66580f32c2
Make CardReader class static (#12451)
* Make CardReader a static class
* Make CardReader flags into bitfields
2018-11-16 22:39:16 -06:00
Scott Lahteine d97e31db4c
Optimize Power-Loss Recovery (#12440) 2018-11-16 20:47:07 -06:00
Scott Lahteine a0c795b097
Encapsulate common display code in a singleton (#12395)
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 12:16:24 -06:00
Scott Lahteine 471f403a67 Reduce code size with plain inlines 2018-11-11 08:36:10 -06:00
Scott Lahteine 4f72e041f2 Use card.stopSDPrint() for completeness 2018-11-06 20:55:17 -06:00
Scott Lahteine f5eab912ed
Apply #pragma once, misc cleanup (#12322)
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
2018-11-04 02:25:55 -06:00
Scott Lahteine 42f8b6c530
Make M125 work with SDSUPPORT (#12289) 2018-11-01 15:03:45 -05:00
Scott Lahteine b5d7f69b51 Followup to #12249 2018-10-30 22:51:45 -05:00
Chris Pepper 66d44c72c3 Add fast binary file transfer to SD card option (#12249) 2018-10-30 19:44:12 -05:00
Scott Lahteine f9b80e7217 Make getfilename_sorted standard for listings 2018-10-29 13:54:21 -05:00
Marcio Teixeira 1a00d1bdaf Add pullup to USB interrupt line
- A pullup on the INT pin is required when the pin is level-active
2018-10-25 10:42:08 -05:00
Ludy 44369d536a Use millis_t where needed (#12152) 2018-10-20 23:21:27 -05:00
TheSFReader 1fb9b299d4 Add M524 to abort SD printing (#12155) 2018-10-19 14:25:07 -05:00
Scott Lahteine d26d9d5b81 Tweak IS_SD_INSERTED 2018-10-19 14:00:36 -05:00
Scott Lahteine c6a5c74208 Add parentheses to SD macros 2018-10-19 13:52:57 -05:00
Marcio Teixeira 71e19baf69 Fix kill => disable_all_heaters => print_job_timer.stop (#12146)
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
2018-10-18 21:20:56 -05:00
Marcio Teixeira 5b7dd553d3 Fix sd_mmc_spi_mem capacity; clean up USB code (#12134)
- Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card.
- Clean up the USB flashdrive code and add better debugging.
2018-10-18 11:34:07 -05:00
Scott Lahteine 9bf5d4331c Clear up some compiler warnings 2018-10-16 05:47:02 -05:00
Marcio Teixeira 2067619a26 Add USB_FLASH_DRIVE_SUPPORT 2018-10-04 19:54:12 -05:00
Scott Lahteine 3019713402 Reorganize some enums 2018-10-01 05:32:55 -05:00
Scott Lahteine 065e9c3d66 Add card.longest_filename method 2018-07-17 18:18:52 -05:00
Scott Lahteine d05e832f29 Add STM32F1 support for SD-based EEPROM 2018-07-06 23:45:47 -05:00
Scott Lahteine 8c0ec81a19 Followup to #11187 2018-07-03 18:19:26 -05:00
Scott Lahteine 1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY (#11187) 2018-07-02 23:21:28 -05:00
Scott Lahteine 4b2af6ab48 Minor patches to POWER_LOSS_RECOVERY 2018-07-02 17:26:53 -05:00
Scott Lahteine fbf1c9b496
Fix and tweak POWER_LOSS_RECOVERY (#11151) 2018-06-29 22:41:02 -05:00
Giuliano e970e429b6 [2.0.x] Fix null check in lsDive (#10978) 2018-06-09 22:03:49 -05:00
Scott Lahteine c2bdbdffaa Prevent a buffer overflow in diveToFile
Co-Authored-By: akunt
2018-06-05 22:13:17 -05:00
Scott Lahteine 8b44745bc7
Clean up and consolidate SD-related code (#10831) 2018-05-24 01:18:56 -05:00
etagle a11eb50a3e Refactor and optimize Stepper/Planner
Better encapsulation and considerably reduce stepper jitter
2018-05-20 06:23:58 -05:00
Scott Lahteine 306f0f2135
Move Stepper::synchronize to Planner (#10713)
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-12 01:38:02 -05:00
Scott Lahteine d1b619be52 Standardize some hexadecimals 2018-05-08 09:19:18 -05:00
Scott Lahteine 05fca752d6 Clean up autostart handling 2018-05-01 01:35:57 -05:00
Scott Lahteine 11ab017dd0 Creality3D Power-Loss Recovery 2018-04-21 21:56:50 -05:00
Marcio Teixeira 2efc072fdb Clear progress bar on completion (#10333)
Fix #10330
2018-04-06 20:13:19 -05:00
Bob-the-Kuhn 902c885782 Switch to TMC2130 compatible hardware SPI & misc (#10299) 2018-04-04 20:13:27 -05:00
Eduardo José Tagle 97e8a6ebd9 Various fixes for DUE... (#10152)
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
2018-03-21 19:04:45 -05:00
TheSFReader 2e43438e0c Add C parameter to M27 to include the long filename
In answer to #10001

Add an option to retrieve the currently open file name (long filename if possible).
2018-03-15 23:06:18 -05:00
Scott Lahteine 2168d6ac25 Allow NULL prepend in lsDive 2018-03-15 23:06:17 -05:00
Scott Lahteine 22a017a856
Rebuild SD file sort array on Stop SD Print (#9976)
Thanks Chuck Hellebuyck.
2018-03-07 01:42:11 -06:00
TheSFReader eb079959fb Report sd card progress [FR] #9751 (#9832)
* SD Status auto-report feature
Feature Request #9751
2018-02-26 15:38:27 -06:00
Scott Lahteine 02474a321a Fix SDSUPPORT (and indentation)
Based on https://github.com/MarlinFirmware/Marlin/issues/8746#issuecomment-368471901 by @benlye
2018-02-26 14:40:40 -06:00
Scott Lahteine e749945317
Un-pause print on cancel (#9780) 2018-02-23 13:42:15 -06:00
GMagician 6d4bc9a1f8 [2.0.x] Fix SD wrong filename list (#9342)
If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry
2018-01-26 14:03:51 -06:00
Scott Lahteine 2bea1bda56 Move more strings to PROGMEM 2018-01-24 00:06:06 -06:00
Scott Lahteine 382a5e3318 Clean up trailing whitespace 2018-01-21 17:19:38 -06:00
GMagician 6667a916a4 Indentation fix 2018-01-13 09:48:26 +01:00
GMagician be717b3c07 Save some program memory
This will save some program memory with no speed lose
2018-01-13 08:56:51 +01:00
GMagician f37c64ee5b Fix unsupported CMD59
It seems that some SD cards don't support CRC_ON_OFF command. This fix will permit to use also these cards but leaving CRC check active on the system
2018-01-13 08:53:12 +01:00
Thomas Moore f7efac57b7 Multi-host support 2018-01-10 00:14:47 -06:00
Thomas Moore 8afc4f8d9d Fix UBL compilation warnings 2018-01-02 21:00:06 -06:00
Scott Lahteine 50366b00d5 Tweak cleaning buffer / SD finished command 2017-12-24 20:35:05 -06:00
etagle 498ea7512a Exposed SDCard interface to the public, to USB MSD is able to read/write sectors on the SD card 2017-12-21 02:30:18 -03:00
etagle 9aff55ed1f Backported latest improvements and fixes from the SdFat liibrary to our own version. This includes support for CRC7 validation on commands and also, made sure that even if using software SPI implementations, SD card speed is properly adjusted when transitioning from INITIALIZATION to DATA TRANSFER mode. ALL HALs implement spiInit, even in SW SPI mode, and we NEED this change to improve 25x the transfer speed of the SD card and allow implementations of USB MSD 2017-12-21 02:29:00 -03:00
Scott Lahteine 8b12371e45 Change some hex case 2017-12-15 15:47:22 -06:00
Scott Lahteine b634bfe1b1 Tweak to readDir code 2017-11-26 18:25:00 -06:00
Scott Lahteine f90c075d1f SD Menu patches 2017-11-26 01:14:18 -06:00
Scott Lahteine e0d367f1fb Fix M32 P subroutine handling 2017-11-15 00:44:21 -06:00
Scott Lahteine 9f8b4c5ee8 Patch SD lib files for readability 2017-11-15 00:44:21 -06:00
Scott Lahteine 9f89b5d876 Fix for MAX_VFAT_ENTRIES sanity check 2017-10-30 15:11:47 -05:00
Scott Lahteine 2cdde08339 Apply items specified in code review
Followup to #8122
2017-10-30 15:03:07 -05:00
Bob-the-Kuhn b7a66742dd tested
add sort alpha section to other LPC1768 boards
2017-10-30 13:01:19 -05:00
Scott Lahteine 8949c8c0a5 Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp 2017-10-29 22:45:18 -05:00
Roxy-3D 3f5f39576b Reprint option for last SD Memory card file (#8106)
* Re-Print of same SD Memory Card file with single click

* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of  https://github.com/MarlinFirmware/Marlin/pull/8104
2017-10-26 15:50:18 -05:00
Thomas Moore 9e699811d2 Make LPC1768 pinmapping not specific to Re-ARM (#8063)
* Merging early because of build failures.  See #8105

* Make LPC1768 pinmapping not specific to Re-ARM

* Add HAL_PIN_TYPE and LPC1768 pin features

* M43 Updates

* Move pin map into pinsDebug_LPC1768.h

* Incorporate comments and M226

* Fix persistent store compilation issues

* Update pin features

* Update MKS SBASE pins

* Use native LPC1768 pin numbers in M42, M43, and M226
2017-10-26 13:37:26 -05:00
Scott Lahteine 3d2b2eb1ca Prevent SDCARD_SORT_ALPHA from exploding 2017-10-20 19:13:21 -05:00
Scott Lahteine 783ddf9691 Add SCROLL_LONG_FILENAMES option 2017-10-20 19:13:21 -05:00
Scott Lahteine 12aa1b999a Fix display issue with SD_SORT_ALPHA cached names 2017-10-07 15:08:08 -05:00
Thomas Moore 0cb00f52d9 Cleanup warnings 2017-09-30 16:47:17 -05:00
Scott Lahteine c4e4a0688c Fix bug in SD Autostart
As pointed out by @marcio-ao in #7638
2017-09-24 17:53:39 -05:00
Scott Lahteine 722786966a Add gcode.cpp, motion.*, queue.* - Apply to some G-codes. 2017-09-21 16:26:45 -05:00
Scott Lahteine 614a86a380 SD file updates 2017-09-21 16:26:43 -05:00
Scott Lahteine b66d65f865 Move 'sd' files 2017-09-12 14:51:05 -05:00