Scott Lahteine
cebd2bfff0
Auto-select power plugs for RAMPS derivatives
2016-08-02 11:59:25 -07:00
Scott Lahteine
34c60f1b55
Merge pull request #4491 from thinkyhead/rc_fix_lcd_move_e
...
Use a default argument in _lcd_move_e
2016-08-01 16:45:25 -07:00
Scott Lahteine
38af251b91
Use a default argument in _lcd_move_e
2016-08-01 16:09:26 -07:00
Scott Lahteine
374ae6c099
Fix pins for RAMBO plus VIKI
2016-08-01 16:09:26 -07:00
Scott Lahteine
7594138740
Merge pull request #4493 from jbrazio/buildroot-cleanup
...
Move font folder
2016-08-01 15:57:23 -07:00
Scott Lahteine
6eed37aafb
Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off
...
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 18:23:51 -07:00
Scott Lahteine
4bf3526d00
Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb
...
Wrangle RAMPS variants and derivatives
2016-07-31 18:22:49 -07:00
Scott Lahteine
1993c45759
Merge pull request #4487 from thinkyhead/rc_refresh_pos_fix
...
Update refresh_positioning - no need for obj ref
2016-07-31 18:22:38 -07:00
Scott Lahteine
f83369b79c
Update refresh_positioning - no need for obj ref
2016-07-31 18:01:13 -07:00
Scott Lahteine
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 17:49:34 -07:00
Scott Lahteine
49997e2e22
HI_VOLT_PIN => "RAMPS_Dn_PIN"
2016-07-31 15:42:52 -07:00
AnHardt
60ad365e21
repair-software-spi
2016-07-31 15:50:42 +02:00
Scott Lahteine
f388beafa1
Merge pull request #4476 from otvald/RCBugFix
...
FIX for endstop adjustemt on delta is offset
2016-07-31 01:09:54 -07:00
Scott Lahteine
3633d4978b
Merge pull request #4475 from esenapaj/Fix-for-PR-#4452
...
Fix for PR #4452 (Additional heater-state output changes)
2016-07-31 01:08:27 -07:00
Thomas Otvald Jensen
fe059f1221
During homing, line_to_axis_pos will make a path which moves across the
...
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!
Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
2016-07-30 16:50:31 +02:00
esenapaj
bd73e6d3c8
Fix for PR #4452 (Additional heater-state output changes)
...
・Add missing ';'
2016-07-30 22:49:30 +09:00
esenapaj
cd5b03d88f
Update distribution date and readme
2016-07-30 21:27:29 +09:00
Scott Lahteine
f575e92f2e
Merge pull request #4473 from esenapaj/Follow-up-the-PR-#4408-etc
...
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
2016-07-30 04:45:27 -07:00
esenapaj
657ef8aded
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
...
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
2016-07-30 20:32:57 +09:00
Scott Lahteine
83d341c394
Make Conditionals.h a catch-all for old configs
2016-07-30 04:25:30 -07:00
Scott Lahteine
de951c64f1
Make pins for EFF a consistent order
2016-07-30 04:17:21 -07:00
Scott Lahteine
49f75b7891
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 04:17:21 -07:00
Scott Lahteine
d3b713cebc
Set flags for RAMPS "type" in pins.h
2016-07-30 04:17:21 -07:00
Scott Lahteine
223b7e473f
RAMPS assignment for derivatives
2016-07-30 04:17:21 -07:00
Scott Lahteine
3865843283
Consolidate setting of RAMPS High Voltage PWM outputs
2016-07-30 04:17:21 -07:00
Scott Lahteine
bdac2eb13a
Don't set non-existent SLED_PIN
2016-07-30 04:17:21 -07:00
Scott Lahteine
bfbd01e29a
Merge pull request #4470 from thinkyhead/rc_fix_manual_move
...
Followup to #4468
2016-07-30 04:17:05 -07:00
Scott Lahteine
802d873fc1
Merge pull request #4469 from esenapaj/Fix-for-PR-#4453
...
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
2016-07-30 04:08:54 -07:00
Scott Lahteine
8e2f095dde
Merge pull request #4456 from jbrazio/speaker-type3
...
Improvement to non-blocking speaker
2016-07-30 04:07:08 -07:00
Scott Lahteine
ad68b4cb8b
Followup to #4468
2016-07-30 03:49:42 -07:00
esenapaj
b8c112c490
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
2016-07-30 19:37:43 +09:00
Scott Lahteine
2f76138645
Merge pull request #4468 from thinkyhead/rc_fix_manual_move
...
Specify manual-movable E axes by extruder type
2016-07-30 03:21:43 -07:00
Scott Lahteine
696b63e300
Specify manual-movable E axes by extruder type
2016-07-30 00:36:48 -07:00
Scott Lahteine
46c33f1cfa
Merge pull request #4467 from jbrazio/safe_delay-millis_t
...
Makes safe_delay() to be fully compatible with delay()
2016-07-29 20:23:44 -07:00
Scott Lahteine
9e21b2e51d
Merge pull request #4455 from AnHardt/double-bump-feature
...
double bump probing as a feature
2016-07-29 20:00:10 -07:00
Scott Lahteine
db4d03bc81
Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2
...
Additional heater-state output changes
2016-07-29 19:58:00 -07:00
Scott Lahteine
c68ca95345
Merge pull request #4464 from thinkyhead/rc_fix_steps_per_mm_handling
...
Account for DELTA in Planner::refresh_positioning
2016-07-29 19:34:59 -07:00
João Brázio
226e74a438
Fixes safe_delay() to be fully compatible with delay()
2016-07-30 02:56:26 +01:00
João Brázio
8e79e8cdb3
Adds types.h
2016-07-30 02:55:52 +01:00
Scott Lahteine
844a4e799e
Account for DELTA in Planner::refresh_positioning
2016-07-29 18:41:11 -07:00
AnHardt
7188ce0ad6
double bump probing as a feature
...
Why double touch probing is not a good thing.
It's widely believed we can get better __probing__ results when using a double touch when probing.
Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.
Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.
What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.
So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)
What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
2016-07-30 03:00:49 +02:00
Scott Lahteine
c31f56a38c
Deprecate EXTRUDER_WATTS and BED_WATTS
2016-07-29 17:34:14 -07:00
Scott Lahteine
e1970b4b28
Show power output in same order as temp output
2016-07-29 14:55:22 -07:00
Scott Lahteine
74df828acc
Show ADC values inline rather than after
2016-07-29 14:55:18 -07:00
João Brázio
2b5faa61e2
Consolidates Buzzer and Speaker into a single object
2016-07-29 19:25:39 +01:00
João Brázio
8093c5f534
Non-blocking speaker now uses arduino's tone()
2016-07-29 18:45:50 +01:00
João Brázio
8896f08074
Fixes a compilation error introduced by #4448
2016-07-29 18:33:42 +01:00
Scott Lahteine
ea5ac94804
Improved MANUAL_[XYZ]_HOME_POS
...
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
2016-07-28 19:51:48 -07:00
Scott Lahteine
b40661cb18
Fix output of heater states
2016-07-28 17:40:01 -07:00
Scott Lahteine
9083e5420a
Merge pull request #4419 from AnHardt/sd2pinmap
...
Switch Sd2CardLib to fastio
2016-07-28 17:38:46 -07:00
Scott Lahteine
6f59560526
Merge pull request #4448 from jbrazio/speaker-followup
...
A little cleanup at speaker.h
2016-07-28 17:37:36 -07:00
Scott Lahteine
c94b6dd3e7
Revert to SanityCheck on every .cpp file
2016-07-28 17:17:50 -07:00
Scott Lahteine
256b03598d
Merge pull request #4450 from thinkyhead/rc_fix_delta_optimization
...
Fix DELTA speed calculation
2016-07-28 16:50:04 -07:00
Scott Lahteine
753283e020
inverse_second => inverse_mm_s
2016-07-28 16:35:18 -07:00
Scott Lahteine
83e1d90ca3
Undo errant optimization of block->millimeters
2016-07-28 16:26:52 -07:00
João Brázio
909e98b1af
A little cleanup at speaker.h
2016-07-29 00:03:25 +01:00
Scott Lahteine
ae1c7bca1b
Merge pull request #4445 from thinkyhead/rc_fix_rdfgsc_mega3
...
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
2016-07-28 15:55:30 -07:00
Scott Lahteine
03fdb26cd2
Wrangle encoder bits, LCD_CLICKED
2016-07-28 14:44:37 -07:00
Scott Lahteine
155def24c6
BLEN_A, B, C are defined in ultralcd headers
2016-07-28 14:38:50 -07:00
Scott Lahteine
42dcc3bf50
Remove "the click" comments
2016-07-28 14:38:50 -07:00
Scott Lahteine
0eba65f96b
Fix for R.D.F.G.S.C. with MINITRONICS board
2016-07-28 14:38:50 -07:00
fabtopia
83d0d59303
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
...
The support for reprapworld LCD boke the code for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER. See Full Grapics Display does not work any more after #4408 #4439
2016-07-28 13:12:19 -07:00
João Brázio
4f191a384b
Moves the font folder into the buildroot
2016-07-28 19:56:41 +01:00
Scott Lahteine
5367d56f87
Merge pull request #4434 from thinkyhead/rc_delta_safe_homing
...
DELTA should ignore Z_SAFE_HOMING
2016-07-27 23:41:52 -07:00
Scott Lahteine
2525528fb2
DELTA should ignore Z_SAFE_HOMING
2016-07-27 23:25:56 -07:00
Scott Lahteine
ab4b2a66ff
Allow zero Z_RAISE_BETWEEN_PROBINGS
2016-07-27 05:00:58 -07:00
Scott Lahteine
8953e3e984
Allow Z_SAFE_HOMING without a probe
2016-07-27 04:33:56 -07:00
AnHardt
e4942d2163
Switch SD2cadrLib to fastio
...
Replace all fastDigitalRead/Write() with READ/WRITE()
Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.
Remove these conditional pin definitions from the pin-files. They are now always defined.
Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 12:40:44 +02:00
Scott Lahteine
21e744c454
Allow zero raise for deploy/stow
2016-07-26 17:19:25 -07:00
Scott Lahteine
54084612fd
Merge pull request #4415 from petrzjunior/transl
...
[LANGUAGE] Update Czech (Info screen strings)
2016-07-26 13:20:20 -07:00
Scott Lahteine
5597400cda
Merge pull request #4414 from thinkyhead/rc_split_conditionals
...
Split up Conditionals.h into two files
2016-07-26 13:16:52 -07:00
Scott Lahteine
4be635ec6e
Remove MSG_PRINT_TIME from languages
2016-07-26 12:47:45 -07:00
Scott Lahteine
3be49881c0
Make SanityCheck.h a catch-all for obsolete configs
2016-07-26 12:41:40 -07:00
Scott Lahteine
fa647cca23
Do the sanity check just once per build
2016-07-26 12:37:14 -07:00
Scott Lahteine
24a1a16e5d
Move versioning to MarlinConfig.h
2016-07-26 12:37:14 -07:00
Scott Lahteine
7e70a0b05d
Move pins / Arduino includes to MarlinConfig.h
2016-07-26 12:37:14 -07:00
Scott Lahteine
d9f7ed9a3c
Move some macros from Marlin.h to macros.h
2016-07-26 12:37:13 -07:00
Scott Lahteine
277899c175
Move include _Bootscreen.h where needed
2016-07-26 12:37:13 -07:00
Scott Lahteine
83c4653c71
Include boards and macros ahead of configs
2016-07-26 12:19:50 -07:00
Scott Lahteine
5f4702ecb2
Make Conditionals.h a catch-all for old configs
2016-07-26 12:19:50 -07:00
Scott Lahteine
8a44928df3
Make Conditionals.h a catch-all for old configs
2016-07-26 12:19:50 -07:00
Petr Zahradník junior
3d9b878cf0
Czech update
2016-07-26 13:48:27 +02:00
Scott Lahteine
c6226bb0aa
Unify config in a single include without nested includes
2016-07-25 23:04:19 -07:00
Scott Lahteine
2d378fac1b
No need to include thermistortables.h in Configuration.h
2016-07-25 22:43:50 -07:00
Scott Lahteine
df27d01cd9
Arrange needed includes in Marlin.h
2016-07-25 20:53:36 -07:00
Scott Lahteine
93ea281061
Split up Conditionals.h into two files
...
Rather than include twice, which is tricky but may confuse
2016-07-25 20:30:45 -07:00
Scott Lahteine
8684570f68
Merge pull request #4412 from thinkyhead/rc_followup_4402
...
Followup #4402 fixing 3-point leveling
2016-07-25 16:10:50 -07:00
Scott Lahteine
c55b7d0750
Merge pull request #4405 from thinkyhead/rc_theres_always_something
...
Move HAS_DIGIPOTSS to Conditionals.h
2016-07-25 15:58:42 -07:00
Scott Lahteine
42eebcd518
Merge pull request #4409 from thinkyhead/rc_cleanup_comment
...
Clean up Transfer Buffer Size comment
2016-07-25 15:58:34 -07:00
Scott Lahteine
5272147f7c
Followup #4402 fixing 3-point leveling
2016-07-25 15:56:34 -07:00
Scott Lahteine
fcc39e2b5f
Clean up Transfer Buffer Size comment
2016-07-25 12:54:55 -07:00
Scott Lahteine
0c0a63322b
Patches to prepare REPRAPWORLD_GRAPHICAL_LCD
2016-07-25 12:10:25 -07:00
brupje
a60a668f6b
Support for REPRAPWORLD_GRAPHICAL_LCD
2016-07-25 12:10:25 -07:00
Scott Lahteine
4f2ff46ab9
Move HAS_DIGIPOTSS to conditionals
2016-07-25 00:10:46 -07:00
Scott Lahteine
54f4f80077
Merge pull request #4404 from thinkyhead/rc_better_stepper_indirection
...
Arrange stepper_indirection by axis
2016-07-24 19:26:39 -07:00
Scott Lahteine
169c21b477
Merge pull request #4402 from thinkyhead/rc_consistent_positioning
...
Account for coordinate space offsets
2016-07-24 19:23:20 -07:00
Scott Lahteine
750a1e5116
Arrange stepper_indirection by axis
2016-07-24 19:00:51 -07:00
Scott Lahteine
7c27f34996
Merge pull request #4397 from thinkyhead/rc_tweak_eeprom
...
Neaten up EEPROM read/write functions
2016-07-24 18:45:54 -07:00
Scott Lahteine
2595a40a61
Account for coordinate space more in G28 / G29 / M48
2016-07-24 18:34:05 -07:00
Scott Lahteine
060dc6d95a
Neaten up EEPROM read/write functions
2016-07-24 18:19:39 -07:00
Scott Lahteine
b7b7c90477
Merge pull request #4389 from thinkyhead/rc_optimize_planner
...
Optimize planner with precalculation, etc.
2016-07-24 17:48:23 -07:00
Scott Lahteine
6900bb2286
Merge pull request #4395 from tnw513/italian_fix
...
Update Italian translations. Remove trailing spaces.
2016-07-24 17:47:48 -07:00
Scott Lahteine
e4816293a8
serial_echopair_P for uint16_t
2016-07-24 17:46:37 -07:00
Scott Lahteine
d8e5af6834
Use RAW_POSITION for MBL in planner.set_position_mm
2016-07-24 17:20:36 -07:00
Scott Lahteine
b183442c61
Fix inactive_extruder_x_pos for coordinate space
2016-07-24 17:20:36 -07:00
Scott Lahteine
f75b0c2ee1
Make POSITION macros global
2016-07-24 17:20:36 -07:00
Scott Lahteine
101b60ef42
Tweak Dual X Carriage data spacing
2016-07-24 17:20:35 -07:00
Scott Lahteine
1fe60b723f
Merge pull request #4400 from thinkyhead/rc_sanity_check_temp_sensor
...
Sanity check for too many temp sensors
2016-07-24 15:38:41 -07:00
Scott Lahteine
bedda3be61
Patch generic delta error caught by sanity check
2016-07-24 15:24:40 -07:00
Scott Lahteine
a5212bf277
Sanity check for too many temp sensors
2016-07-24 13:47:27 -07:00
Scott Lahteine
d8f2876753
Replace some float division with multiplication
2016-07-24 13:27:50 -07:00
Scott Lahteine
ddde785b37
Code formatting in planner.cpp
2016-07-24 13:27:50 -07:00
Scott Lahteine
f8b5749235
Replace division in planner with multiplication
2016-07-24 13:27:49 -07:00
Scott Lahteine
b921f6b69d
Optimize calculation of block->millimeters for DELTA
2016-07-24 13:27:49 -07:00
Scott Lahteine
db5df9500b
Move sync_plan_position closer to the top
2016-07-24 13:27:49 -07:00
Scott Lahteine
2839c56f5a
Merge pull request #4390 from jbrazio/duration_t
...
Renamed timestamp_t to duration_t
2016-07-24 13:24:05 -07:00
Scott Lahteine
d6c50671d3
Sanitycheck: Z_SAFE_HOMING points are reachable
2016-07-24 10:54:47 -07:00
Scott Lahteine
a6203366b6
Sanitycheck: Z_SAFE_HOMING requires a probe
2016-07-24 10:54:25 -07:00
Scott Lahteine
bbe5b80492
Always define probe limits if there is a probe
2016-07-24 10:53:58 -07:00
Silvio Didonna
950397f2a0
Added missing translations. Removed trailing spaces for consistency ( #4376 )
2016-07-24 17:22:30 +02:00
João Brázio
50fb0f7cec
M31 serial output is now always in EN
2016-07-24 15:52:03 +01:00
João Brázio
62d96d72f3
Renamed timestamp_t to duration_t
2016-07-24 03:16:02 +01:00
Scott Lahteine
3e2b3353b0
Fix axis indices for COREYZ
2016-07-23 19:02:14 -07:00
Scott Lahteine
c287846f46
Merge pull request #4387 from thinkyhead/rc_anhardt_more_4370
...
Update Z in a unified way in run_z_probe
2016-07-23 16:47:10 -07:00
Scott Lahteine
22d0654fe6
Merge pull request #4382 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-07-23 16:31:38 -07:00
Scott Lahteine
bb93b6822a
Use set_current_from_steppers_for_axis
2016-07-23 15:25:54 -07:00
AnHardt
96a162beda
Use implications from #4370 in run_z_probe()
...
See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680
2016-07-23 13:09:28 -07:00
Scott Lahteine
4e67a85a5d
Macros to loop over axes
2016-07-23 13:09:28 -07:00
esenapaj
784be56e99
Follow-up the PR #4353 (General cleanup: enum)
...
・Update description of M111
2016-07-24 00:53:35 +09:00
esenapaj
3c11977558
Update Japanese translation
...
・Add translation
・Change translation
・Remove translation
2016-07-23 22:07:20 +09:00
Scott Lahteine
08459a003f
Undo the self-sabotage that is do_blocking_move_to_axis_pos
2016-07-23 00:59:11 -07:00
esenapaj
d32c4056ad
Fix for the PR #4379 (Additional logging of do_blocking_move_to)
...
・Remove unneeded PSTR()
2016-07-23 16:38:57 +09:00
Scott Lahteine
8099ee51a5
Merge pull request #4379 from thinkyhead/rc_blocking_move_logging
...
Additional logging of do_blocking_move_to
2016-07-23 00:10:55 -07:00
Scott Lahteine
8633b644cf
Merge pull request #4378 from thinkyhead/rc_debug_leveling_docs
...
Document DEBUG_LEVELING_FEATURE
2016-07-22 23:57:01 -07:00
Scott Lahteine
ad16d5019e
Additional logging of do_blocking_move_to
2016-07-22 23:53:08 -07:00
Scott Lahteine
bb9da6ebdd
Document DEBUG_LEVELING_FEATURE
2016-07-22 23:37:41 -07:00
Scott Lahteine
652fd8a826
Merge pull request #4362 from thinkyhead/rc_duplication_mode
...
DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 21:17:59 -07:00
Scott Lahteine
1766b990b8
Merge pull request #4376 from jbrazio/timestamp_t-short
...
Adds short format to timestamp_t
2016-07-22 21:17:17 -07:00
Scott Lahteine
6da3729531
Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics
...
Delta Forward Kinematics (and LOGICAL_POSITION)
2016-07-22 21:16:00 -07:00
João Brázio
9e5dbf67e8
Update the stats menu to include longest job and extruded filament
2016-07-23 03:05:45 +01:00
João Brázio
86d9311495
Rework LCD implementation to use timestamp_t
2016-07-23 03:05:36 +01:00
Scott Lahteine
b3eb0c8569
Add LOGICAL_POSITION macro, apply to kinematics
2016-07-22 18:38:13 -07:00
Scott Lahteine
35a610abf9
const arg to inverse_kinematics
2016-07-22 17:42:48 -07:00
João Brázio
b4aad85c9a
Rework stats menu to use timestamp_t
2016-07-23 01:42:21 +01:00
João Brázio
ecd48027fa
Adds short timestamp format to timestamp_t
2016-07-23 01:41:25 +01:00
Scott Lahteine
b6afa028f4
Don't call adjust_delta on SCARA
2016-07-22 16:36:34 -07:00
Scott Lahteine
d5e2d523c7
Generalize kinematics function names
2016-07-22 16:36:34 -07:00
Scott Lahteine
9c4ad7d7ef
Clean up delta declarations in Marlin_main.cpp
2016-07-22 16:36:33 -07:00
Scott Lahteine
4b1725628b
Move kinematic functions to "private" scope
2016-07-22 16:36:33 -07:00
Scott Lahteine
cde068ea42
Use set_current_from_steppers in quickstop_stepper
2016-07-22 16:36:33 -07:00
Scott Lahteine
9f30cc84ce
Use set_current_from_steppers for other kinematics
2016-07-22 16:36:33 -07:00
AnHardt
5db9b940ee
Use forwardKinematics in DELTA run_z_probe()
2016-07-22 16:36:33 -07:00
Scott Lahteine
b5a9647fec
Use ENABLED
in stepper_indirection.h
2016-07-22 16:26:06 -07:00
Scott Lahteine
cbc7f22ad9
Implement DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 16:23:58 -07:00
Scott Lahteine
91777dd76c
Add DUAL_NOZZLE_DUPLICATION_MODE option
2016-07-22 16:22:56 -07:00
Scott Lahteine
260bbb3109
Fix a couple of simple typos
2016-07-22 16:22:56 -07:00
Scott Lahteine
179e091473
Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t
...
Implements timestamp_t structure
2016-07-22 16:08:10 -07:00
AnHardt
499e404fbf
forwardKinematics for Delta printers
2016-07-22 16:01:51 -07:00
João Brázio
23043a1e05
Rework some code to use timestamp_t struct (saves 72 bytes)
2016-07-22 15:53:31 -07:00
João Brázio
9388dcfa49
Implements timestamp_t structure
2016-07-22 15:53:31 -07:00
Scott Lahteine
0b2c608d2f
Merge pull request #4372 from jbrazio/gcc-bark
...
Fix minor gcc warning
2016-07-22 15:18:53 -07:00
Scott Lahteine
311c7dadb6
Cleanup do_blocking_move_to for DELTA
2016-07-22 14:18:45 -07:00
Scott Lahteine
b78590e63d
Patch and cleanup run_z_probe
2016-07-22 14:18:45 -07:00
João Brázio
2f7716987d
Fix minor gcc warning
2016-07-22 16:08:56 +01:00
João Brázio
efd3aabda8
Adds missing documentation to the point_t structure
2016-07-22 15:19:20 +01:00
Scott Lahteine
39caef4279
Merge pull request #4361 from AnHardt/imp-dbmt-for-delta
...
DELTA do_blocking_move_to() more like the Chartesian one
2016-07-21 20:05:04 -07:00
Scott Lahteine
7d869ad98b
Merge pull request #4365 from thinkyhead/rc_shrink_planner_accel
...
Adjustments to planner acceleration limit
2016-07-21 18:18:15 -07:00
AnHardt
376a57232e
DELTA do_blocking_move_to() more like the Chartesian one
2016-07-22 03:12:46 +02:00
Scott Lahteine
824c6859e2
Merge pull request #4369 from thinkyhead/rc_no_static_moves
...
inline to fix warnings, smaller build size (sometimes)
2016-07-21 14:46:09 -07:00
Scott Lahteine
976c31235d
inline to fix warnings, smaller build size (sometimes)
2016-07-21 13:49:37 -07:00
AnHardt
6ef26a85d8
Back to the differences method in run_z_probe()
2016-07-21 18:16:38 +02:00
Scott Lahteine
4226f56f53
Revert the planner acceleration logic somewhat
2016-07-20 19:19:47 -07:00
Scott Lahteine
16e5348659
Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28
...
Always switch to tool 0 for G28
2016-07-20 19:07:35 -07:00
Scott Lahteine
209f5c03d0
Fewer temporary vars in planner accel limit
2016-07-20 18:29:29 -07:00
Scott Lahteine
62ecd107ba
Patch ultralcd_impl header conditional names
2016-07-20 09:36:55 -07:00
Scott Lahteine
d2e9a9c188
Always switch to tool 0 for G28
2016-07-20 09:36:55 -07:00
Scott Lahteine
194d9521c3
Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe
...
Unify run_z_probe
2016-07-19 19:02:39 -07:00
Scott Lahteine
4a6ed5e221
Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST
2016-07-19 18:42:48 -07:00
AnHardt
09a3cc33e6
Unify run_z_probe
...
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
2016-07-19 18:42:48 -07:00
Scott Lahteine
6137a1d934
Merge pull request #4359 from thinkyhead/rc_wrangle_movement_etc
...
Use ENABLED(MAPPER_NON)
2016-07-19 18:22:55 -07:00
Scott Lahteine
0432613ad7
use enabled macro for mapper setting
2016-07-19 18:08:56 -07:00
Scott Lahteine
e44b37cdc2
motion section marker below homing speeds
2016-07-19 17:31:58 -07:00
Scott Lahteine
204fd6ec44
Set homing feedrates individually
2016-07-19 17:31:58 -07:00
Scott Lahteine
2bad02e60d
Reprapworld Keypad: F1 opens the Move Axis menu
2016-07-19 16:40:39 -07:00
Scott Lahteine
eaa6f568ee
Prevent re-entrant call of Reprapworld Keypad handler
2016-07-19 16:40:39 -07:00
Scott Lahteine
6abf916575
Reprapworld Keypad move step is 1mm
2016-07-19 16:40:39 -07:00
Scott Lahteine
06ac1f3bcf
Reduce Reprapworld Keypad move code size
2016-07-19 16:40:39 -07:00
Scott Lahteine
5d5affdfca
Merge pull request #4355 from thinkyhead/rc_rename_ultralcd_files
...
Rename ultralcd implementation files for consistency
2016-07-19 16:14:27 -07:00
Scott Lahteine
bb225dedc6
Merge pull request #4354 from thinkyhead/rc_jbrazio_rework_g12
...
NOZZLE_CLEAN_FEATURE with no dependency on HAS_BED_PROBE
2016-07-19 15:26:59 -07:00
Scott Lahteine
8a2efd1155
Rename ultralcd implementation files for consistency
2016-07-19 15:26:14 -07:00
João Brázio
b869fbc05e
Update all config files with the new G12 options
2016-07-19 15:07:03 -07:00
João Brázio
47fef80848
Nozzle::clean() no longer requires HAS_BED_PROBE
2016-07-19 15:07:02 -07:00
Scott Lahteine
f1f1bac0e1
Merge pull request #4341 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-07-19 15:04:22 -07:00
Scott Lahteine
6c899bb520
Merge pull request #4349 from jbrazio/gcc-bark-bark
...
Removes some minor GCC warnings
2016-07-19 13:42:33 -07:00
Scott Lahteine
ef0a22871e
Merge pull request #4350 from jbrazio/followup-a875861
...
Adds utility.h
2016-07-19 13:40:52 -07:00
Scott Lahteine
9eba58a031
Merge pull request #4351 from jbrazio/u8glib-converter
...
Updates u8glib's bmp2hex converter
2016-07-19 13:39:33 -07:00
Scott Lahteine
c502018eab
Merge pull request #4353 from jbrazio/global-enum-file
...
General cleanup: enum
2016-07-19 13:37:56 -07:00
Scott Lahteine
0f9953b031
Merge pull request #4342 from AnHardt/rep-cons-g28
...
Introduce line_to_axis_pos() for use in homeaxis()
2016-07-19 12:56:58 -07:00
AnHardt
11c075c6b2
Introduce line_to_axis_pos(axis_codes axis, float where, float feed_rate = 0.0)
...
and use it in `homeaxis()` instead of `do_blocking_move_to_axis_pos()`.
`do_blocking_move_to_axis_pos` was wrong because it performed subdivided, delta-corrected moves for x- and y-axis.
The first common move for delta homing is like quick_home but for 3 towers.
Fix two warnings.
2016-07-19 17:24:44 +02:00
João Brázio
3ebad4e020
Moves all global enums to a central file
2016-07-19 14:31:09 +01:00
João Brázio
238fefcb00
Updates Stopwatch class to use internal state enum
2016-07-19 14:30:44 +01:00
João Brázio
30ac0782a9
Comment section style correction
2016-07-19 03:27:42 +01:00
João Brázio
8ecee431c4
Updates u8glib's bmp2hex converter
2016-07-19 03:16:30 +01:00
João Brázio
79e7721b76
Removes some minor GCC warnings
2016-07-19 03:03:11 +01:00
João Brázio
f4d63796b2
Adds utility.h
2016-07-19 02:55:23 +01:00
esenapaj
361307831e
Follow-up the PR #4335 (Debug char, fix compile errors for lcd pins)
...
・Solve a flickering when SD card is inserted or removed at using a ASCII
LCD + language_kana.h
2016-07-18 20:09:24 +09:00
esenapaj
ff48bbb86a
Update Japanese translation
...
・Add new translation
2016-07-18 17:01:56 +09:00
Scott Lahteine
46117593b9
Merge pull request #4185 from esenapaj/Update-Japanese-translation
...
Update Japanese translation (work in progress)
2016-07-17 18:36:34 -07:00
Scott Lahteine
3422103863
Merge pull request #4310 from thinkyhead/rc_mbl_position_shift
...
Fix position shift with MBL
2016-07-17 18:31:25 -07:00
Scott Lahteine
92757bd7b3
Merge pull request #4339 from esenapaj/Follow-up-the-PR-#4163
...
Follow-up the PR #4163 (Mixing and Switching Extruders)
2016-07-17 18:15:23 -07:00
Scott Lahteine
493d30cd97
Drop intermediate nx, ny, and set destination directly
2016-07-17 17:59:52 -07:00
Scott Lahteine
07a735ad22
We always use destination
so modify mesh_buffer_line
2016-07-17 17:57:33 -07:00
Scott Lahteine
04a5b7b257
A macro to normalize positions
2016-07-17 17:57:32 -07:00
esenapaj
5c8e87a866
Follow-up the PR #4163 (Mixing and Switching Extruders)
...
・Update forgotten K8400 files
2016-07-18 09:48:13 +09:00
Scott Lahteine
86eb5251c5
Fix some debug messages
2016-07-17 17:10:02 -07:00
Scott Lahteine
1e57a6af73
Use blocking_move, current_position in G28 homing
2016-07-17 16:56:13 -07:00
Scott Lahteine
f6a3a1da09
nz and ne are always set, so drop them down
2016-07-17 14:12:39 -07:00
Scott Lahteine
d0009e013b
Rename cell index vars
2016-07-17 14:12:39 -07:00
Scott Lahteine
697373b071
Reduce code size of mesh_buffer_line
2016-07-17 14:11:25 -07:00
Scott Lahteine
103d312f6d
MBL can actually do up to 9 x 9
2016-07-17 14:11:25 -07:00
Scott Lahteine
f4a69281fc
Only call mesh_buffer_line when MBL is active
2016-07-17 14:11:25 -07:00
Scott Lahteine
799a31cd30
Include the position_shift when splitting mesh lines
2016-07-17 14:08:20 -07:00
Scott Lahteine
f242aea032
Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you
...
Wrangle feed rate variables
2016-07-17 14:07:52 -07:00
Scott Lahteine
0342661b3f
Merge pull request #4335 from thinkyhead/rc_status_pad_jp
...
Debug char, fix compile errors for lcd pins
2016-07-17 14:07:08 -07:00
Scott Lahteine
81e01152bb
Merge pull request #4336 from thinkyhead/rc_bltouch_sensor
...
BLTouch probe sensor
2016-07-17 14:06:32 -07:00
Scott Lahteine
1583177ef4
BLTOUCH probe config option
2016-07-17 13:55:38 -07:00
Scott Lahteine
176b9627c7
Some cleanup ahead of BLTOUCH support
2016-07-17 13:55:38 -07:00
Scott Lahteine
39706f3e57
Endstop invert flags as macros instead of const bool
2016-07-17 13:51:02 -07:00
Scott Lahteine
7242d44810
Endstops vars already initialized
2016-07-17 13:38:48 -07:00
Scott Lahteine
5ed1e7a464
codenum => dwell_ms
2016-07-17 13:35:21 -07:00
Scott Lahteine
69d6016941
Revert default state of endstops in M502
2016-07-17 13:35:21 -07:00
Scott Lahteine
0fcd3706dd
Replace ENDSTOPS_ONLY_FOR_HOMING with ENDSTOPS_ALWAYS_ON_DEFAULT
2016-07-17 13:35:21 -07:00
Scott Lahteine
671634bf11
Fix spacing after section header
2016-07-17 13:35:21 -07:00
Scott Lahteine
f38553b482
fix a debug message
2016-07-17 13:29:42 -07:00
Scott Lahteine
3d78b8f929
Use HYPOT macro instead of hypot function
2016-07-17 13:29:42 -07:00
Scott Lahteine
9f9fe043ba
Apply sq macro throughout
2016-07-17 13:29:41 -07:00
Scott Lahteine
93ba5bddd7
Append units to feedrate variables
2016-07-17 13:29:41 -07:00
Scott Lahteine
5e3d3918b6
Patch compile error for RAMPS LCD pins
2016-07-17 12:27:37 -07:00
Scott Lahteine
94955a8bf7
pad string in lcd_finishstatus
2016-07-17 12:27:37 -07:00
Scott Lahteine
21ee0612e3
Debug char
2016-07-17 12:27:36 -07:00
Scott Lahteine
8f24e0a556
Debugging of MBL in G28
2016-07-17 11:08:30 -07:00
Scott Lahteine
05da02f0a2
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-07-17 10:53:10 -07:00
Scott Lahteine
22b4cff423
New extruder type configuration options
2016-07-17 00:13:56 -07:00
esenapaj
601015b73e
Update Japanese translation
2016-07-17 16:04:12 +09:00
Scott Lahteine
9766e24504
Merge pull request #4277 from thinkyhead/rc_mks_13_viki2
...
Support for VIKI2 with MKS 1.3 / 1.4
2016-07-16 23:49:33 -07:00
Scott Lahteine
02285662f5
Merge pull request #4298 from jbrazio/feature/filament-counter
...
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 23:48:46 -07:00
Scott Lahteine
bf16ae5a70
Merge pull request #4299 from jbrazio/feature/g27-park-nozzle
...
Implements park nozzle feature
2016-07-16 23:47:12 -07:00
Scott Lahteine
aaa0d298b9
Merge pull request #4326 from thinkyhead/rc_no_static_items_fix
...
Suppress compiler warnings in ultralcd.cpp
2016-07-16 23:38:08 -07:00
Scott Lahteine
cc3ef73583
Merge pull request #4327 from thinkyhead/rc_petrzjr_long_print
...
LCD Longer print
2016-07-16 23:37:34 -07:00
Scott Lahteine
77c8fb627f
Merge pull request #4329 from thinkyhead/rc_italian_fix
...
Added missing Italian translations
2016-07-16 23:37:15 -07:00
Scott Lahteine
b14888501b
Merge pull request #4301 from Ingramz/RCBugFix
...
Add Cartesio CN Controls V11
2016-07-16 22:35:07 -07:00
Silvio Didonna
32e0d71729
Added missing translations
2016-07-16 22:26:46 -07:00
Scott Lahteine
0f3232065e
Merge pull request #4305 from jbrazio/feature/splash-improvement
...
Custom boot screen feature improvement
2016-07-16 21:59:39 -07:00
Petr Zahradník junior
2d7fe9dc78
LCD Longer print
2016-07-16 18:21:06 -07:00
Scott Lahteine
eee903bd4b
Format some DAC lines
2016-07-16 17:59:13 -07:00
Scott Lahteine
d53dcaa796
Suppress some compiler warnings
2016-07-16 17:59:01 -07:00
João Brázio
fa4274cf4c
Improves the custom bootscreen logo feature
2016-07-17 01:31:44 +01:00
João Brázio
1f3283e3a5
Adds custom boot logos for bq Hephestos 2 and Cartesio
2016-07-17 01:31:36 +01:00
João Brázio
dfa1c45075
Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive
2016-07-17 01:15:17 +01:00
Scott Lahteine
ed468e848f
Merge pull request #4321 from esenapaj/Follow-up-the-PR-#4287
...
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
2016-07-16 17:14:21 -07:00
João Brázio
a8758619ec
The safe_delay() is now globaly accessible
2016-07-16 12:28:06 +01:00
João Brázio
9a00108cb6
Adds the WEBSITE_URL as the boot screen line 2
2016-07-16 12:24:37 +01:00
João Brázio
f5234b0695
Adds a customizable screen timeout for the default boot screen
2016-07-16 12:24:36 +01:00
João Brázio
2f26bc2153
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 12:12:27 +01:00
João Brázio
336481ea81
Added G27 configuration options to all configs
2016-07-16 12:07:59 +01:00
João Brázio
c711701626
Implements a nozzle parking command (G27)
2016-07-16 12:07:59 +01:00
João Brázio
5f368d1bc3
Followup for #4320
2016-07-16 11:57:35 +01:00
João Brázio
d7c51bc4b9
Merge pull request #4320 from jbrazio/followup/4307
...
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
2016-07-16 11:48:00 +01:00
esenapaj
af9b1d79b1
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
...
・Remove MSG_END_HOUR and MSG_END_MINUTE from all the language files
・Change from MSG_INFO_TOTAL_PRINTS to MSG_INFO_PRINT_COUNT in German
file
2016-07-16 18:39:22 +09:00
Scott Lahteine
e563634a25
Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28
...
Use do_blicking_move_to*() in G28
2016-07-15 20:22:02 -07:00
Scott Lahteine
59ae1811c2
Merge pull request #4303 from AnHardt/delta-g28
...
DELTA: Move out of the clip-zone after G28
2016-07-15 20:20:22 -07:00
João Brázio
fdea8b6e6a
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
2016-07-16 03:59:49 +01:00
AnHardt
d2a49c016d
DELTA: Move out of the clip-zone after G28
...
Move down to a safe height after G28 for DELTAs.
2016-07-15 15:22:44 +02:00
AnHardt
46994fd17d
Use do_blicking_move_to*() in G28
2016-07-15 15:02:15 +02:00
João Brázio
ffbb31b235
Fixes an PSTR overflow with print_xyz()
2016-07-15 11:25:34 +01:00
Indrek Ardel
ecb23c1b65
Add Cartesio CN Controls V11 board
2016-07-15 12:55:47 +03:00
Indrek Ardel
c8f2dd7cd5
Fix CN Controls 12 styling
2016-07-15 09:54:09 +03:00
Scott Lahteine
cec7110409
Merge pull request #4308 from thinkyhead/rc_debug_gcode_t
...
Added logging related to gcode_T
2016-07-14 19:46:33 -07:00
Scott Lahteine
6446d3939a
Merge pull request #4309 from thinkyhead/rc_static_item_fix_77
...
Fix skipping of static items
2016-07-14 19:28:49 -07:00
Scott Lahteine
95ab2fd3ae
Fix skipping of static items
2016-07-14 19:16:16 -07:00
Scott Lahteine
166f19251e
Add more debugging for leveling
...
- Especially in `gcode_T`
- In `update_software_endstops`
- Some tweaks to observe
2016-07-14 19:04:13 -07:00
Scott Lahteine
7ac0b91a45
Collapsible long comment in gcode_T
2016-07-14 18:28:41 -07:00
João Brázio
e71a631f8f
do_blocking_move_*() no longer depend on HAS_BED_PROBE
2016-07-15 01:54:14 +01:00
Scott Lahteine
8bf6861af8
Merge pull request #4054 from jbrazio/feature/g12-clean-tool
...
Implements clean nozzle feature (Lulzbot's REWIPE)
2016-07-14 14:38:38 -07:00
Scott Lahteine
c5e51f6b96
finished => completed
2016-07-14 11:46:35 -07:00
Scott Lahteine
1618870c84
card.printingHasFinished does print_job_timer.stop
2016-07-14 11:39:58 -07:00
Scott Lahteine
34da77dad3
Simply run M31 at the end of an SD print
2016-07-14 11:39:58 -07:00
Scott Lahteine
23d2bc5ab0
Patch Greek for new strings
2016-07-14 11:39:58 -07:00
Scott Lahteine
a8d71f0ac6
Support longer print times in M31
2016-07-14 11:39:58 -07:00
Scott Lahteine
e481b79af1
Allow stopwatch and printcounter to go over 18 hours
2016-07-14 11:39:57 -07:00
João Brázio
68c343a09a
Added G12 configuration options to all configs
2016-07-14 00:38:42 +01:00
João Brázio
4937f9ada4
Minor G12 tweaks and point_t struct extension
2016-07-14 00:07:36 +01:00
Scott Lahteine
6080924589
Merge pull request #4296 from jbrazio/feature/bqh2-update
...
Update the bq Hephestos 2 configuration
2016-07-13 13:18:09 -07:00
Scott Lahteine
ed89c71e53
Merge pull request #4291 from esenapaj/Follow-up-the-PR-#4278
...
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
2016-07-13 13:17:03 -07:00
João Brázio
021544f572
Improves G12 zig-zag pattern
2016-07-13 21:14:56 +01:00
João Brázio
b05a75655a
Implements a nozzle cleaning pattern generator (G12)
2016-07-13 21:14:19 +01:00
João Brázio
005af84140
Update the bq Hephestos 2 configuration
2016-07-13 21:06:31 +01:00
esenapaj
8f03f0be9b
Follow-up the PR #4252 (Replace PLA/ABS preheating with generic)
2016-07-13 22:42:16 +09:00
esenapaj
c2c8ab4698
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
2016-07-13 22:24:31 +09:00
Scott Lahteine
4f77adddbe
Merge pull request #4286 from thinkyhead/rc_debug_clean
...
Prefix and suffix in debug output
2016-07-12 20:49:15 -07:00
Scott Lahteine
e5c7af5ddc
Merge pull request #4222 from thinkyhead/rc_allow_cold_extrude
...
M302: Add "P" parameter, status output
2016-07-12 20:40:14 -07:00
Scott Lahteine
2224032568
Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine
...
No delay for the smallest LCD moves
2016-07-12 20:16:38 -07:00
Scott Lahteine
cdd77d23bb
Neaten up temperature member data
2016-07-12 20:04:15 -07:00
Scott Lahteine
d4c68279c8
Add "P" parameter to M302
2016-07-12 20:04:15 -07:00
Scott Lahteine
a5bae3c7d5
Merge pull request #4229 from blubbfish/patch-1
...
Update language_de.h for German translation
2016-07-12 20:01:46 -07:00
Scott Lahteine
a8b6b6a128
Merge pull request #4252 from thinkyhead/rc_rename_hpb
...
Replace PLA/ABS preheating with generic
2016-07-12 20:00:33 -07:00
Scott Lahteine
1e14df876d
Use varname as prefix in DEBUG_POS, string as suffix
2016-07-12 19:58:09 -07:00
Scott Lahteine
9e8b3e5ee6
Homing direction is irrelevant in probe raise!
2016-07-12 18:09:02 -07:00
Scott Lahteine
ecd5e810ac
No delay for the smallest LCD moves
2016-07-12 18:09:01 -07:00
Scott Lahteine
2b9515d60f
Merge pull request #4281 from AnHardt/lang-system
...
Don't use UTF-strlen() if the text is not UTF
2016-07-12 17:21:28 -07:00
Scott Lahteine
973a669aa3
Merge pull request #4264 from thinkyhead/rc_ultralcd_encoder_pos
...
Remove extraneous conditions for encoder position
2016-07-12 16:54:13 -07:00
Scott Lahteine
e9f62d8fdb
Remove extraneous conditions for encoder position
2016-07-12 16:41:00 -07:00
Scott Lahteine
7c81398f95
Merge pull request #4279 from esenapaj/Follow-up-the-PR-#4271
...
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
2016-07-12 16:39:37 -07:00
Scott Lahteine
0554b65d22
Merge pull request #4284 from thinkyhead/rc_serial_ln_macros
...
Sled-probe sanity fix, conditionals for remaining types of leveling
2016-07-12 16:36:33 -07:00
Scott Lahteine
655c3fd55f
Move delta ABL sanity checks up
2016-07-12 16:10:16 -07:00
Scott Lahteine
db0882d068
AUTO_BED_LEVELING_3POINT and DELTA_BED_LEVELING_GRID
2016-07-12 16:10:11 -07:00
Scott Lahteine
e974ac63ef
Init matrix in planner.init
2016-07-12 15:55:27 -07:00
Scott Lahteine
47d55513ec
Merge pull request #4280 from AnHardt/msg-file-upload
...
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
2016-07-12 13:02:52 -07:00
AnHardt
b273736962
Make MAPPER_NON the fall back mapper
...
Make MAPPER_NON the fall back mapper - if no other is defined.
One list less to maintain.
2016-07-12 19:59:14 +02:00
AnHardt
54d35230df
Don't use UTF-strlen() if the text is not UTF
2016-07-12 19:59:03 +02:00
Scott Lahteine
a1de96d152
Merge pull request #4278 from thinkyhead/rc_more_hotends_1
...
Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1
2016-07-12 10:36:13 -07:00
AnHardt
87957c7b44
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
...
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
else RH hangs.
2016-07-12 13:13:04 +02:00
esenapaj
9b5cbf2423
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
...
・Update a forgotten Configuration_adv.h of K8400
2016-07-12 17:50:49 +09:00
Scott Lahteine
809da999dc
Apply HOTEND_INDEX in preheat methods
2016-07-11 22:27:25 -07:00
Scott Lahteine
3d78b690e5
Single PID dataset with HOTENDS == 1
2016-07-11 22:27:24 -07:00
Scott Lahteine
bf9967c65d
Apply HOTEND_INDEX in MILLISECONDS_PREHEAT_TIME
2016-07-11 22:27:24 -07:00
Scott Lahteine
11dcbae7a2
Only a single E axis. Can tool-change reseed position[E_AXIS]?
2016-07-11 22:27:24 -07:00
Scott Lahteine
4865447830
Merge pull request #4276 from esenapaj/Suppress-warnings
...
Suppress warnings
2016-07-11 19:08:59 -07:00
Scott Lahteine
815df28b0b
Merge pull request #4274 from esenapaj/Follow-up-the-PR-#4024
...
Follow-up the PR #4024 (Greek Language by @psavva)
2016-07-11 19:04:44 -07:00
Scott Lahteine
44f739a5eb
Merge pull request #4273 from esenapaj/Fix-for-the-PR-#4256
...
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
2016-07-11 19:02:45 -07:00
Scott Lahteine
02f711fe00
Merge pull request #4275 from AnHardt/dont-deploy
...
Don't deploy/stow the probe if z-min-endstop is used for homing
2016-07-11 18:46:23 -07:00
Scott Lahteine
6a45aad893
Merge pull request #4272 from AnHardt/m100-rep
...
Repair M100
2016-07-11 18:45:13 -07:00
Scott Lahteine
243ad4312a
Merge pull request #4271 from thinkyhead/rc_X_DUAL_STEPPER_DRIVERS
...
X_DUAL_STEPPER_DRIVERS
2016-07-11 18:38:45 -07:00
Scott Lahteine
6e68dd292b
Merge pull request #4243 from thinkyhead/rc_fix_static_scrolling
...
Improve STATIC_ITEM implementation
2016-07-11 18:25:00 -07:00
Scott Lahteine
d17b161832
Don't draw current screen if simply changing screens
2016-07-11 18:14:04 -07:00
Scott Lahteine
096f9981d1
Scroll to the top when changing screens
2016-07-11 18:14:04 -07:00
Scott Lahteine
7ae84d768e
Tweak conditionals for REPRAPWORLD_KEYPAD
2016-07-11 18:14:04 -07:00
Scott Lahteine
155af6b861
Rename vars, add comments for menu macros
2016-07-11 18:14:04 -07:00
Scott Lahteine
31f2cf5f6f
Make encoderLine signed for proper compares
2016-07-11 18:14:03 -07:00
Scott Lahteine
d9f75f62c0
START_ROW => START_COL
2016-07-11 18:14:03 -07:00
Scott Lahteine
d2099fef0d
Left-justify thermistor info
2016-07-11 18:14:03 -07:00
Scott Lahteine
85aeb02aa6
Invert headings on Graphical LCD
2016-07-11 18:14:03 -07:00
Scott Lahteine
3a67fb77b0
Concatenate LCD static strings
2016-07-11 18:14:02 -07:00
Scott Lahteine
13dc619f43
Scroll static screens more simply
2016-07-11 18:14:02 -07:00
Scott Lahteine
5051723c2e
Redraw after cursor correction in STATIC_ITEM
2016-07-11 18:14:02 -07:00
esenapaj
58177a1602
Suppress warnings
2016-07-12 08:22:24 +09:00
Scott Lahteine
10ebf28ee3
Allow override of ENCODER_FEEDRATE_DEADZONE, lower default for Viki
2016-07-11 15:43:08 -07:00
Scott Lahteine
9b1ba1012a
Support for VIKI2 with MKS Gen 1.3 / 1.4
2016-07-11 15:43:08 -07:00
Scott Lahteine
55dc8051d8
Cleanup of RAMPS LCD pins
2016-07-11 15:38:55 -07:00
AnHardt
7bcab26f2a
Don't deploy/stow the probe if z-min-endstop is used for homing
...
Don't deploy/stow the probe if z-min-endstop is used for homing.
Don't apply `zprobe_zoffset` if probe was not used.
2016-07-11 22:01:44 +02:00
esenapaj
84ded1f659
Follow-up the PR #4024 (Greek Language by @psavva)
...
・Update forgotten Configuration.h of K8400
2016-07-12 04:19:09 +09:00
esenapaj
6af525e252
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
2016-07-12 03:51:29 +09:00
AnHardt
23e0134596
Repair M100
...
M100 D was running too long - caused watchdog resets.
M100 I showed more free memory than a Arduino Mega has RAM.
2016-07-11 20:44:30 +02:00
Scott Lahteine
4b4a582c4f
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 10:22:19 -07:00
Scott Lahteine
91bd6eade7
X_DUAL_STEPPER_DRIVERS configuration option
2016-07-11 10:22:19 -07:00
Scott Lahteine
6121c9018a
Merge pull request #4265 from thinkyhead/rc_buzzer_patchup
...
Two strategies to address a stuck buzzer
2016-07-10 19:46:15 -07:00
Scott Lahteine
4a100c6832
Merge pull request #4250 from AnHardt/wait-for-cooling-slope
...
Adjust wait_for_cooling slope
2016-07-10 19:45:23 -07:00
Scott Lahteine
ed018c98d5
Merge pull request #4024 from thinkyhead/rc_greek_language
...
Greek Language by @psavva
2016-07-10 19:42:09 -07:00
Scott Lahteine
d1dffc7ad1
timestamp => endtime
2016-07-10 19:36:46 -07:00
Scott Lahteine
71674059c3
Two strategies to address a stuck buzzer
2016-07-10 19:25:23 -07:00
Scott Lahteine
928ff6487a
Greek language pack from @psavva
2016-07-10 18:59:04 -07:00
AnHardt
e92e58df1f
Adjust wait_for_cooling slope
...
Adjust wait_for_cooling slope
and drop mintemp for cooling.
See
https://github.com/MarlinFirmware/Marlin/pull/4169#issuecomment-231544532
2016-07-11 03:36:23 +02:00
Scott Lahteine
167f4aa0cc
Merge pull request #4259 from clexpert/patch-3
...
Update language_cz.h
2016-07-10 18:26:23 -07:00
Scott Lahteine
8dda05e92a
Merge pull request #4258 from clexpert/patch-2
...
Total print time for LCD correction (hours:minutes format)
2016-07-10 18:25:18 -07:00
Scott Lahteine
182c8d7f8f
Dyze High Temp Thermistor Support
2016-07-10 17:59:05 -07:00
Scott Lahteine
5b0e46c986
Merge pull request #4256 from thinkyhead/rc_fix_singlenozzle_temp
...
Additional tweaks for HOTENDS == 1
2016-07-10 17:57:00 -07:00
Scott Lahteine
ee0983ab57
Further reduction when HOTENDS == 1
2016-07-10 16:54:30 -07:00
Scott Lahteine
3e1bbd5e27
Indentation in gcode_M100
2016-07-10 16:33:51 -07:00
Scott Lahteine
b72238f406
Invariant get_pid_output with HOTENDS < 2
2016-07-10 16:33:51 -07:00
Petr Zahradnik
66602f4af6
Update language_cz.h
...
New strings:
#define MSG_HALTED
#define MSG_PLEASE_RESET
Some texts shortened for smaller displays.
2016-07-10 13:25:50 +02:00
Petr Zahradnik
eaf9e615ce
Total print time for LCD correction (hours:minutes format)
2016-07-10 13:08:05 +02:00
esenapaj
9e56d5825e
Adjust spacing
2016-07-10 14:25:29 +09:00
esenapaj
5832f4b848
Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104)
...
・Update forgotten example configuration files
2016-07-10 14:24:57 +09:00
Scott Lahteine
77283f5bf0
Merge pull request #4245 from thinkyhead/rc_simpler_therm_check
...
Simpler/extensible thermistor test in thermistortables.h
2016-07-09 21:13:42 -07:00
Scott Lahteine
f9e08b1fcd
Merge pull request #4254 from AnHardt/killscreen
...
Add a kill-screen
2016-07-09 20:44:42 -07:00
AnHardt
faac2bcfdb
Add a kill-screen
2016-07-10 04:50:45 +02:00
Scott Lahteine
3b3e52616c
Merge pull request #4253 from thinkyhead/rc_clexpert_runout
...
Runout Sensor without SD Card, Print Timer support in M104
2016-07-09 19:10:36 -07:00
Scott Lahteine
aa3ab93971
Merge pull request #4240 from AnHardt/sampler-8-7-16
...
Today's fix and cleanup collection
2016-07-09 19:09:45 -07:00
Scott Lahteine
4cd045791c
Reduce code size by trusting the compiler
2016-07-09 18:17:44 -07:00
Scott Lahteine
a8538bd7ce
General cleanup, code reduction in Marlin_main.cpp
2016-07-09 18:17:44 -07:00
Scott Lahteine
1026e5b071
Replace PLA/ABS preheating with generic
2016-07-09 18:06:51 -07:00
Petr Zahradnik
e282d69f63
Print job timer comment changed
2016-07-09 17:57:54 -07:00
Petr Zahradnik
a2159cfbc3
Error message change in SanityCheck.h
2016-07-09 17:57:54 -07:00
Petr Zahradník junior
315b4c2153
Runout sensor without SD Card
2016-07-09 17:57:53 -07:00
Scott Lahteine
51c9c3fe2c
Indentation in MarlinSerial.cpp
2016-07-09 17:57:53 -07:00
Scott Lahteine
e03414b2dd
Simpler/extensible thermistor test in thermistortables.h
2016-07-08 19:54:45 -07:00
AnHardt
4b44a23a36
Add TX-buffer for MarlinSerial
...
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.
Deactivated by default.
The boards with AT90USB processor (USBCON) already use a TX-buffer.
2016-07-08 17:25:21 +02:00
AnHardt
468f7f03a2
homeaxis() can leave early
...
when no known axis needs to be homed.
Most changes are only caused from altering the indentation.
```
if (axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0) {
...
}
to
if (!(axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0)) return;
...
```
2016-07-08 15:59:33 +02:00
AnHardt
eff7912243
Ensble/disable hardware endstops in G28 globally.
...
For moving away from the endstops we do not have to disable them.
They are not tested anyway.
2016-07-08 15:49:10 +02:00
AnHardt
f69434d81c
Eliminate void setup_for_endstop_move()
2016-07-08 15:23:20 +02:00
AnHardt
0ea6247fc2
Use logic in Z_SAFE_HOMING
...
Use logic in Z_SAFE_HOMING
From
```
if (home_all_axis || homeZ) {
if (home_all_axis) {
...
home z
}
else if (homeZ) { // Don't need to Home Z twice
home z
}
}
```
to
```
if (home_all_axis || homeZ) {
if (home_all_axis) {
...
}
home z
}
```
2016-07-08 15:08:50 +02:00
AnHardt
de3a169336
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
...
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
Always make a potential rise to `home_offset[Z_AXIS]` possible in G28.
Get rid of some very ugly constructs in MBL (ultralcd.cpp).
2016-07-08 15:08:32 +02:00
AnHardt
88ed232f53
Remove HAS_BED_PROBE case in first raise in G28
...
Differentiating made sense here when we could save a dozen lines of code,
but not for one line.
2016-07-08 14:59:44 +02:00
AnHardt
653eff3b31
Clean up quick_home_xy()
...
Since we do the actual homing now in the 'normal' routines `quick_home_xy()`
can be simplified to a relative simple diagonal move.
2016-07-08 14:59:27 +02:00
Scott Lahteine
98d0167a57
Merge pull request #4226 from thinkyhead/rc_emergency_command_parser
...
MarlinSerial emergency-command parser (with M108)
2016-07-07 16:53:55 -07:00
Scott Lahteine
2ee4e4f791
Make wait_for_heatup volatile
2016-07-07 16:37:23 -07:00
Scott Lahteine
bd5a825b8b
Wait for end of line before invoking action
2016-07-07 16:37:23 -07:00
Scott Lahteine
ea47803ae2
Simplify emergency parser (only parse initial command)
2016-07-07 16:37:22 -07:00
Scott Lahteine
834ad14c8d
Add quickstop_stepper to update current position with stepper.quick_stop()
2016-07-07 16:37:22 -07:00
Scott Lahteine
ecffe92e20
Group EMERGENCY_PARSER commands
2016-07-07 16:37:22 -07:00
AnHardt
a129078927
Add an emergency-command parser to MarlinSerial (supporting M108)
...
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
2016-07-07 16:37:22 -07:00
Scott Lahteine
9f42b1a075
Merge pull request #4235 from thinkyhead/rc_revert_quickhome_test
...
Fix quick homing, tweak MIN_Z_HEIGHT_FOR_HOMING
2016-07-07 13:37:14 -07:00
Scott Lahteine
ad968f2325
Merge pull request #4234 from thinkyhead/rc_better_position_logging
...
Move XYZ in print_xyz and DEBUG_POS to the front
2016-07-07 12:31:15 -07:00
Scott Lahteine
4036c73cdd
Don't raise Z if only homing Z
2016-07-07 12:28:37 -07:00
Scott Lahteine
0b6f8f8244
Apply MIN_Z_HEIGHT_FOR_HOMING raise literally
2016-07-07 12:25:02 -07:00
Scott Lahteine
177ec20bf0
Revert quick-home changes
2016-07-07 12:17:34 -07:00
Scott Lahteine
9c5b462ef2
Move XYZ in print_xyz and DEBUG_POS to the front
2016-07-07 11:42:19 -07:00
Scott Lahteine
4e84c803a3
Merge pull request #4232 from thinkyhead/rc_no_axis_codes_needed
...
Don't use axis_codes if a literal will do
2016-07-06 20:05:16 -07:00
Scott Lahteine
e2f7cb0905
Don't use axis_codes if a literal will do
2016-07-06 18:37:21 -07:00
Scott Lahteine
6559f7359f
Fix comment on Z raise for homing, save a few bytes
2016-07-06 16:21:51 -07:00
Scott Lahteine
799c60cadc
Merge pull request #4217 from thinkyhead/rc_fix_homing_raise
...
Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING
2016-07-06 14:39:37 -07:00
Scott Lahteine
d7e9647505
Sanity Check for probe raises
2016-07-06 13:46:06 -07:00
Scott Lahteine
d0b29cabf3
Don't re-home X and Y if you quick homed
2016-07-06 13:46:06 -07:00
Scott Lahteine
e0a6b978f5
Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING
2016-07-06 13:46:05 -07:00
Philip Schell
cf8ec1216a
Update language_de.h for German translation
...
@MarlinFirmware/language-team my changes for the German language. Feel free to improve :)
2016-07-06 21:44:16 +02:00
petrzjunior
b81b77111b
Update language_cz.h
2016-07-06 21:04:34 +02:00
Scott Lahteine
7735ec5e7a
Merge pull request #4223 from thinkyhead/rc_rename_heatup
...
Change cancel_heatup to wait_for_heatup
2016-07-06 11:25:44 -07:00
Scott Lahteine
160a2be117
Change cancel_heatup to wait_for_heatup
2016-07-06 09:17:50 -07:00
AnHardt
16c83d203b
Make use of the good features of a sled probe for all probes.
...
Move and extend axis_unhomed test to deploy/stow_z_probe().
Move and extend position store/restore to deploy/stow_z_probe().
Now all kinds of probes can use the 'E' parameter in G29/M48.
Allen key probes can be used now for grid and 3-point levelling.
Deploying the Allen Key probe uses big moves in z direction.
Too dangerous for an unhomed z-axis.
Throw a compile time error when we try to configure an
Allen Key probe homing to z-min and having no other z-min-endstop.
2016-07-06 04:11:04 +02:00
AnHardt
8555816a11
Generalize and simplify 'triggered when stowed test`
...
The `PROBE_IS_TRIGGERED_WHEN_STOWED_TEST` is able to detect if a probe is
successfully deployed/stowed.
It was part of the Allen Key probes code only.
Now the function is generally available.
Currently this test is compulsory for Allen Key probes to not alter the used behaviour
If you want to add the test for an other type of probe simply add
```
#define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
```
to your config.
2016-07-06 03:56:17 +02:00
AnHardt
5126cce7fd
Move Allen Key probe move scripts to their own functions
...
There was an hidden extra move after the scripts. This is configurable now.
Added the extra moves to the relevant configs.
2016-07-06 03:46:40 +02:00
AnHardt
7d063c111c
Add a optional feedrate parameter to do_blocking_move()
...
Add a optional feedrate parameter to `do_blocking_move()` and its companions.
2016-07-06 03:46:34 +02:00
Scott Lahteine
b114b6a0b3
Save 152 bytes using uint8_t for command indices
2016-07-05 16:29:28 -07:00
Scott Lahteine
0d4ff0c48b
Allow the queue to be cleared from within commands
2016-07-05 16:25:20 -07:00
Scott Lahteine
c450851401
Merge pull request #4209 from AnHardt/too-high-G28
...
Make raise for probe deploy relative in homeaxis()
2016-07-05 11:07:42 -07:00
AnHardt
f799f18388
MBL typo
2016-07-05 18:19:53 +02:00
AnHardt
8b02e68cb6
Make raise for probe deploy relative in homeaxis()
...
Make raise for probe deploy relative in homeaxis()
by setting `current_position[axis]` to zero later.
2016-07-05 10:42:33 +02:00
Scott Lahteine
e48502866b
Merge pull request #3611 from alephobjects/M108_cancel_heatup
...
Introduce M108 cancel wait for heatup/cooldown of the hotend and bed
2016-07-04 01:19:31 -07:00
Scott Lahteine
d70197f514
Merge pull request #4204 from thinkyhead/rc_fix_gcode_t_position
...
Additional patches for gcode_T position change
2016-07-04 01:16:22 -07:00
Scott Lahteine
869b517589
Merge pull request #4205 from thinkyhead/rc_fixup_unit_references
...
References to millimeters in code comments need an update
2016-07-04 01:15:34 -07:00
Scott Lahteine
e104b91ea6
References to millimeters in code comments need an update
2016-07-03 20:13:29 -07:00
AnHardt
ff91d28a3a
Remove wants_to_cool warning
...
Remove wants_to_cool warning
2016-07-04 03:12:11 +02:00
Scott Lahteine
c9e536cf87
Additional patches for gcode_T position change
2016-07-03 18:11:02 -07:00
Scott Lahteine
60865fc45b
Merge pull request #4202 from thinkyhead/rc_fix_gcode_t_position
...
Fix position adjustment with gcode_T and MBL
2016-07-03 17:55:43 -07:00
Scott Lahteine
f841038313
Merge pull request #4201 from thinkyhead/rc_info_fit
...
Shorter labels for Print Stats info
2016-07-03 17:47:00 -07:00
Scott Lahteine
f31af61ee2
Fix position adjustment with gcode_T and MBL
2016-07-03 17:44:04 -07:00
Scott Lahteine
a8f5c2bf96
Merge pull request #4192 from birkett/k8400
...
Add Velleman K8400 board support.
2016-07-03 17:41:13 -07:00
Scott Lahteine
ef8980bfa0
Shorter labels for Print Stats info
2016-07-03 16:00:24 -07:00
Scott Lahteine
2ed625dafa
Fix compiler warnings for static screens
2016-07-03 15:26:17 -07:00
Anthony Birkett
e77844594d
readme.md -> README.md
2016-07-03 22:15:24 +01:00
Anthony Birkett
a0b00d29e3
Add a ported example configuration for the Velleman K8400 (Vertex) printer.
...
Supports both dual and single head printers (with the correct config).
Includes community sourced feed rate fix.
Rename / move files.
Remove redundant definitions.
2016-07-03 22:09:08 +01:00
lrpirlet
9b42c6b44b
apply correction when swtiching from MBL to physical in G28 X
2016-07-03 21:43:42 +02:00
Andrea Cimbalo
46196e9ee5
Add working PlatformIO support
2016-07-03 15:33:24 +02:00
esenapaj
95347fc650
Follow-up the PR #3662 (Rewritten FILAMENT_CHANGE_ENABLE feature)
...
・Update a forgotten Configuration_adv.h of Cartesio
2016-07-03 09:04:29 +09:00
Scott Lahteine
a06c5165a7
Shorter strings for smaller LCDs
2016-07-02 15:47:16 -07:00
Scott Lahteine
982f10e6a0
Use STATIC_ITEM for LCD message display
2016-07-02 15:47:15 -07:00
Petr Zahradnik
43ff0ce35f
Rewritten FILAMENT_CHANGE_ENABLE feature
2016-07-02 15:34:33 -07:00
Scott Lahteine
51b7820686
Patch up About Printer sub-menus
2016-07-02 15:22:34 -07:00
Scott Lahteine
439e78147d
Static menu items take an optional string, LJ by default
2016-07-02 15:22:34 -07:00
Scott Lahteine
fa9b2a925d
Tweak spacing in printcounter.cpp
2016-07-02 15:22:33 -07:00