Commit graph

12525 commits

Author SHA1 Message Date
ellensp 4a71285c34 Fix Serial defines for M43 on AVR (#16649) 2020-01-26 03:05:34 -06:00
Luc 6357619ab2 Add ESP3DLib idletask entry point (#16658) 2020-01-26 01:11:30 -06:00
0r31 e3611ad209 Fix MKS Base + Digipot compile error (#16636) 2020-01-26 01:08:40 -06:00
Jason Smith 95d5a0c480 Fix DELTA_CALIBRATION_MENU recursive call (#16656) 2020-01-26 00:02:06 -06:00
thinkyhead 838a420e27 [cron] Bump distribution date (2020-01-26) 2020-01-26 00:06:19 +00:00
yangwenxiong 248b7dfa59 BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595) 2020-01-25 02:13:39 -06:00
Bob Kuhn 0d166f9c7d Duet Smart Effector support (#16641) 2020-01-25 02:00:51 -06:00
Scott Lahteine 86c18ea6e0 Bring configs and drivers.h up to date 2020-01-24 23:17:52 -06:00
Scott Lahteine b7a67f6f74 Extra debugging for leveling on/off 2020-01-24 23:17:49 -06:00
Scott Lahteine 1c042bbaea Convert chars only for enabled languages 2020-01-24 15:12:04 -06:00
thinkyhead 899db41a5c [cron] Bump distribution date (2020-01-24) 2020-01-24 00:07:21 +00:00
thinkyhead 342f65eb8e [cron] Bump distribution date (2020-01-23) 2020-01-23 00:07:18 +00:00
thinkyhead fd346c6cd1 [cron] Bump distribution date (2020-01-22) 2020-01-22 00:07:17 +00:00
Ryan b7f86bffd5 Arc segment radius scaling (#16551) 2020-01-21 02:53:26 -06:00
InsanityAutomation 79810b7fcb G12 defaults per tool. Event G-code for post-toolchange (#16554) 2020-01-21 02:51:23 -06:00
Scott Lahteine 84c874c53b Tweak some config spacing 2020-01-21 02:43:34 -06:00
MaukCC 04d64351a2 Add HMS434 V15 ATSAM board (#16620) 2020-01-21 01:10:31 -06:00
Tanguy Pruvot c8ac908db2 Release UI on G26 priming timeout (#16449) 2020-01-21 01:05:55 -06:00
0r31 b57ef4b261 Override for LPC1768 u8g/digipot I2C master ID (#16622) 2020-01-20 20:09:16 -06:00
Bob Kuhn 1a5cbc9052 Fix STM401/4xx/STM32F7xx timers, STEVAL_3DP001V1 warning (#16621) 2020-01-20 18:33:36 -06:00
thinkyhead f36225c3e0 [cron] Bump distribution date (2020-01-21) 2020-01-21 00:07:07 +00:00
InsanityAutomation 97b5a5f469 Provide methods for M420 + MBL (#16602) 2020-01-20 01:44:36 -06:00
Bob Kuhn a1f5245e27 L64xx M906 Fix status variable, formatting (#16597) 2020-01-20 01:15:00 -06:00
Giuliano Zaro ef8f829513 Fix CHAMBER_MAXTEMP security margin (#16600) 2020-01-20 00:44:51 -06:00
InsanityAutomation d9cdb4ae19 Move steps/mm out of slim menus (#16603) 2020-01-20 00:43:19 -06:00
0r31 451062553e LPC1768: Allow I2C master channel override (#16584) 2020-01-19 23:59:06 -06:00
InsanityAutomation 0fcf2b1110 Quad Z stepper support (#16277) 2020-01-19 23:35:07 -06:00
0r31 f36f084465 Fix Greek language string (#16601) 2020-01-19 23:03:19 -06:00
Jason Smith 439e73d79c AVR sanity check for MONITOR_DRIVER_STATUS with SW Serial (#16421) 2020-01-19 22:25:38 -06:00
ellensp 0547d9d651 Reset shutdown timer on M85 (#16587) 2020-01-19 22:24:12 -06:00
thisiskeithb 3b34fbd4c4 Update BTT002 pins (#16591) 2020-01-19 22:21:32 -06:00
Giuliano Zaro aec211fc80 SAMD51: ADC for probe temperature compensation (#16596) 2020-01-19 22:17:08 -06:00
Bob Kuhn 1084068a3e Simplify a drivers.h macro (#16589) 2020-01-19 20:59:47 -06:00
Scott Lahteine e9ae585647 Patch for _STEP_INIT 2020-01-19 20:50:33 -06:00
Scott Lahteine dda76e50a9 Use bool in pin compare 2020-01-19 20:05:53 -06:00
Scott Lahteine 37849969ad Function-like macros 2020-01-19 20:01:22 -06:00
Scott Lahteine 707349d492 Updates for L64XX 2020-01-19 19:53:12 -06:00
Scott Lahteine f6a6839a82 Simplify TMC monitor code 2020-01-19 19:29:30 -06:00
Scott Lahteine 79c2f05e7d Fix M112 with Emergency Parser 2020-01-19 19:00:24 -06:00
thinkyhead 4dca6d50c0 [cron] Bump distribution date (2020-01-20) 2020-01-20 00:06:48 +00:00
thinkyhead 23fc81f1af [cron] Bump distribution date (2020-01-19) 2020-01-19 00:07:06 +00:00
Scott Lahteine d035bfb1a9 Allow RRW Keypad with any LCD 2020-01-18 14:48:24 -06:00
thinkyhead 80400ab3f8 [cron] Bump distribution date (2020-01-18) 2020-01-18 00:04:25 +00:00
tompe-proj a338dce83f PINDA v2 temperature sensor / compensation (#16293) 2020-01-17 17:16:45 -06:00
George Fu 4108c5d01f Update FYSETC S6 pins (#16559) 2020-01-17 13:16:05 -06:00
vivian-ng e94f782f51 Shared SPI sanity check (#16581) 2020-01-17 02:54:22 -06:00
Scott Lahteine a578749622 Clean up HAL ADC, old test scripts 2020-01-17 02:44:01 -06:00
Bob-the-Kuhn 0d0dfba203 STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. (#16579) 2020-01-17 02:44:01 -06:00
thinkyhead 91a399ae7f [cron] Bump distribution date (2020-01-17) 2020-01-17 00:06:39 +00:00
felixstorm 2b9eb4437b ESP32 HAL: Fix random pauses during prints (#16548) 2020-01-16 05:57:14 -06:00
ellensp 5bd66241df Fix TOUCH_UI_FTDI_EVE bugs (#16540) 2020-01-16 05:50:00 -06:00
Scott Lahteine 1bb1ce7475 Move macros to stepper/indirection 2020-01-16 05:25:16 -06:00
Jason Smith c305c2cc6b Fix some warnings, Melzi pins 2020-01-15 19:57:16 -06:00
dagorel bda4957f9b Fix I2C address of MCP4728 on LPC176x (#16578) 2020-01-15 19:15:54 -06:00
thinkyhead bc483b2354 [cron] Bump distribution date (2020-01-16) 2020-01-16 00:08:10 +00:00
Dennis 2d7f94cae1 Adjustable ADC debounce delay (#16264) 2020-01-15 18:06:03 -06:00
gjdodd 7481563bd9 Nikon IR support for time lapse photos (#16539) 2020-01-15 17:59:41 -06:00
Scott Lahteine b419ca254b Fix typo 2020-01-15 01:27:32 -06:00
thisiskeithb 7eed008e8e Use Flash EEPROM on BTT002 (#16558) 2020-01-15 01:27:32 -06:00
Bob Kuhn 53dfeed6c0 Steval_3DP001V1 timers, analog inputs, etc. (#16565) 2020-01-14 23:19:13 -06:00
Lino Barreca ef513ef7fb Fix build error with unsupported reset flags (#16562) 2020-01-14 23:19:13 -06:00
Scott Lahteine ea7363a8f4 Update more configs 2020-01-14 18:48:29 -06:00
thinkyhead 8e1a21cf53 [cron] Bump distribution date (2020-01-15) 2020-01-15 00:08:21 +00:00
InsanityAutomation ffd8b595d1 Fix PLR cancel with ExtUI (#16556) 2020-01-13 20:52:24 -06:00
Scott Lahteine 1457e40208 Make lcd_power_loss_recovery_cancel exportable 2020-01-13 20:25:12 -06:00
Bob Kuhn 1ad53cee1f Improved STMicro L64XX stepper driver support (#16452) 2020-01-13 18:47:30 -06:00
thinkyhead 53f1e5ff5b [cron] Bump distribution date (2020-01-14) 2020-01-14 00:08:54 +00:00
Scott Lahteine 0e6ef65aec Clean up whitespace 2020-01-13 16:56:56 -06:00
Bob Kuhn c4ffe74d71 Add SERVO, TONE timers to variant for better STEVAL_3DP001V1 support (#16538) 2020-01-13 00:26:17 -06:00
David Klasinc 55b2af9464 Fix Linux upload path detection (#16514) 2020-01-13 00:23:55 -06:00
thinkyhead fc4a42bbdc [cron] Bump distribution date (2020-01-13) 2020-01-13 00:08:17 +00:00
thinkyhead 57499291d3 [cron] Bump distribution date (2020-01-12) 2020-01-12 00:10:02 +00:00
Ryan V1 56e51efeea Use RECIPROCAL macro (not _RECIP) (#16530) 2020-01-11 17:16:16 -06:00
Jason Smith d22eb261cf Fix probeless delta build (#16537) 2020-01-11 17:14:33 -06:00
FlyingSamson fbf2f36cae Only constrain motion on homed axes (#16533)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-01-11 17:06:52 -06:00
thinkyhead e8941d2bd8 [cron] Bump distribution date (2020-01-11) 2020-01-11 00:08:42 +00:00
Luc d854c8fa5f ESP3d integration for ESP32 (#16515) 2020-01-10 17:22:41 -06:00
Giuliano Zaro e9a97127f7 Update Italian language (#16527) 2020-01-10 16:19:52 -06:00
Giuliano Zaro 0391e5bcc7 Prevent Z misaligment on tool change (#16518) 2020-01-10 16:12:21 -06:00
thinkyhead d02a867424 [cron] Bump distribution date (2020-01-10) 2020-01-10 20:47:56 +00:00
Acenotass 2d820e6204 Update Russian language (#16522) 2020-01-10 13:06:02 -06:00
Tanguy Pruvot f9f7697b96 Fix Probe Offset XY edit items (et Français) (#16523) 2020-01-10 13:04:59 -06:00
InsanityAutomation 409d7378d9 Add Probe Offsets menu (#16444) 2020-01-10 00:47:38 -06:00
ellensp 669fe74096 Fix compile error w/out LCD (#16502) 2020-01-09 04:51:41 -06:00
Jamie 36d08f8ad3 Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs (#16510) 2020-01-09 04:48:00 -06:00
Scott Lahteine 6e658a7c04 Code style and comment tweaks 2020-01-08 20:00:26 -06:00
Scott Lahteine 95046c9047 Extend SERIAL_CHAR to take multiple arguments 2020-01-08 18:36:47 -06:00
thisiskeithb 5beca89412 Add menu item Tune > Advance K (#16488) 2020-01-08 17:43:36 -06:00
Alejandro Aguilera 5a5e1d0401 Fix Change Filament menu item with runout (#16485) 2020-01-08 16:03:23 -06:00
dagorel a88b91b3ed Provide some missing Arduino macros (#16497) 2020-01-07 21:56:47 -06:00
Lino Barreca 5c4c052fd7 Fix SKR Pro BLTouch conflicting timers (#16499) 2020-01-07 21:54:26 -06:00
Vertabreaker d26c32375e Fix EEPROM array size bug (#16475) 2020-01-07 21:49:27 -06:00
ellensp 994c695862 Fix MKS_SGEN sanity check (#16501) 2020-01-07 21:47:45 -06:00
ManuelMcLure 675295692b Fix unused var warning (#16467) 2020-01-05 02:52:38 -06:00
Tanguy Pruvot d1e55a2d1d Remove extra UBL map edit menu item (#16451) 2020-01-05 02:25:03 -06:00
Vertabreaker 5e1f0e5e90 Followup to EEPROM patch (#16470) 2020-01-05 02:19:50 -06:00
Tanguy Pruvot bdcccee203 Improve French language (UBL) (#16453) 2020-01-05 02:09:27 -06:00
Justin d70dad6807 Fix permyriad progress bar (#16460) 2020-01-05 02:08:24 -06:00
Acenotass 93e35880ce Update Russian language (#16461) 2020-01-05 02:04:28 -06:00
Jamie 9b970cf12f Add option to invert joystick axes (#16466) 2020-01-05 02:01:05 -06:00
Jamie 022b6b9067 Fix M115 cap with EXTRUDERS == 0 (#16459) 2020-01-05 01:54:30 -06:00
Jamie fc07b0ea30 Fix EEPROM error with EXTRUDERS == 0 (#16464) 2020-01-05 01:54:30 -06:00
George Fu e593da1c23 Update and fix DGUS (#16317) 2020-01-03 21:00:44 -06:00
greppp 7f87a044cd Fix Ender-2 display pins, add BTN_ENC (#16349) 2020-01-03 20:44:16 -06:00
Vertabreaker b841b9bd01 Add example configs. Expand custom menu. (#16286)
- Anet E10
- Geeetech D200
- Geeetech M201
- JGAurora Magic
- MakerFarm Pegasus 12
2020-01-03 20:37:22 -06:00
George Fu ceeba58dc9 FYSETC F6 v1.4 board support (#16321) 2020-01-03 20:29:25 -06:00
Scott Lahteine aa4db785f2 MSG_WATCH => MSG_INFO_SCREEN 2020-01-03 19:50:55 -06:00
Jason Smith 3cade6245e Fix MIN_PROBE_EDGE bug in default ABL G29 (#16367) 2020-01-03 17:46:26 -06:00
ellensp d7aee3b7b6 Pins debugging AVR serial pins (#16437) 2020-01-03 17:40:56 -06:00
thisiskeithb 64fdc4f24b BTT002: Add runout, PLR, and RGB pins (#16442) 2020-01-03 17:38:15 -06:00
Scott Lahteine 1d0452c41e
Standardize drivers.h values, add class indirection (#16448) 2020-01-03 17:11:36 -06:00
Jason Smith 595e684658 Add Leapfrog Xeed 2015 support (#16400) 2020-01-02 22:04:13 -06:00
Tanguy Pruvot cda363a15e Touch UI: Fix UBL mesh value editing (#16432) 2020-01-02 21:26:03 -06:00
ellensp 7a50dbc00d Add motherboard BIGTREE_SKR_V1.4_TURBO (#16374) 2020-01-02 21:15:34 -06:00
InsanityAutomation d129ac1b37 Z-offset edit precision based on value limits (#16425) 2020-01-02 20:40:40 -06:00
Tanguy Pruvot 1ea529b9c1 STM32F1: Fix misleading indent / nullptr on FSMC (#16431) 2020-01-02 20:19:07 -06:00
Acenotass 5ffabd56eb Update Russian language (#16426) 2020-01-02 20:17:08 -06:00
Dirk O. Kaar d0e1166cce Fix Visual Micro "Arduino IDE for Visual Studio" support (#16418) 2020-01-02 19:01:38 -06:00
Scott Lahteine 5b75a018b7 Misc patches preceding DGUS PR 2020-01-02 17:59:38 -06:00
randellhodges c75b560604 PWM pin not needed for Neopixel brightness / submenu (#16345) 2020-01-02 17:50:19 -06:00
Scott Lahteine a2cda631d9 Clean up trailing whitespace 2020-01-02 16:33:50 -06:00
Jason Smith 9ff2d34bf8 Fix warnings in stepper.cpp (#16364) 2020-01-01 22:06:50 -06:00
Jason Smith 92ad973729 Fix some DOGM warnings (#16363) 2020-01-01 21:58:16 -06:00
rado79 0be8b22d3c Add FILAMENT_UNLOAD_PURGE_FEEDRATE (#16372) 2020-01-01 21:56:58 -06:00
Jason Smith 4e1f2f89f6 Refactor TMC-related macros and sanity checks (#16384) 2020-01-01 21:51:15 -06:00
Lino Barreca ac32ed74b4 Return from loop() on non-AVR boards (#16390) 2020-01-01 21:13:43 -06:00
Alexander Gavrilenko c6f7ea9f22 MKS Robin ILI9328 TFT support (#16401) 2020-01-01 20:55:37 -06:00
Bob Kuhn 747b2b9bf4 Improve STEVAL_3DP001V1 and future STEVAL_* support (#16404) 2020-01-01 20:52:56 -06:00
Pascal de Bruijn 23bdc1556d Permit ENDSTOP_INTERRUPTS_FEATURE on more STM32 (#16412) 2020-01-01 20:41:35 -06:00
Giuliano Zaro 47edbd9220 Fix min limit for acc, feed, jerk (#16416) 2020-01-01 20:38:33 -06:00
Scott Lahteine 00c83e9ca6 Update comments re: NOZZLE_AS_PROBE 2020-01-01 19:41:23 -06:00
Scott Lahteine 832321f55d Fix games menu back item, titles 2019-12-31 16:06:16 -06:00
Scott Lahteine 941a09b6ac Fix Max7219 with 256 or more cels 2019-12-31 16:04:29 -06:00
InsanityAutomation 1c9ccce520 Add NOZZLE_AS_PROBE (no probe offsets) (#15929) 2019-12-24 00:03:08 -06:00
petrzjunior 254d352fca Update Czech language (#16305) 2019-12-23 18:14:51 -06:00
Luu Lac baa101253a MKS Robin 2 (STM32F407ZE) base support (#16270) 2019-12-22 18:16:08 -06:00
ferengi82 2230ef6e09 MKS SGen-L pins EEBF or EFBF scheme (#16296) 2019-12-22 17:11:49 -06:00
Luc 24eaf2d7e0 Some ESP32 patches (#16297) 2019-12-22 16:11:17 -06:00
randellhodges f4196d394b Flash leveling (for some STM32) (#16174) 2019-12-22 16:04:09 -06:00
randellhodges ebdf8b6b1a Fix STM32 flush of TX (used by UBL) (#16197) 2019-12-22 03:08:17 -06:00
FLYmaker 59f9bb2120 Add FLYBOARD (STM32F407ZG) (#16257) 2019-12-22 03:05:30 -06:00
Luc a3d88aebed Add MRR_ESPA/_ESPE (ESP32) boards (#16238) 2019-12-21 18:58:00 -06:00
Jason Smith d5bc5547ee Step timing cleanup and rounding fix (#16258) 2019-12-21 18:36:25 -06:00
Tanguy Pruvot f8065da48f Reset runout.ran_out on resume (#16230) 2019-12-21 18:35:35 -06:00
Jason Smith 0d8c81b2a6 Fix axis CS sanity check (#16271) 2019-12-20 22:05:42 -06:00
Markus Towara 856013cc0f Fix planner compile error (#16272) 2019-12-20 22:04:49 -06:00
randellhodges 0b6c2d893e Fix G34 with Z_DUAL_STEPPER_DRIVERS compile (#16274) 2019-12-20 22:03:37 -06:00
Jason Smith 2e235aff03 Fix HAL_STM32 + Arduino IDE SoftwareSerial conflict (#16266) 2019-12-20 19:14:27 -06:00
Scott Lahteine 87992f3669
Use Github Actions for CI, date bump (#16269) 2019-12-20 19:11:53 -06:00
Scott Lahteine 64ebec50dc Move pins debug condition 2019-12-20 10:19:41 -06:00
Jeff Eberl 70325a6a0f Update test scripts to error on unknown (#16229) 2019-12-19 21:03:42 -06:00
Scott Lahteine d81de7f521 Tweak sanity checks 2019-12-19 21:02:14 -06:00
Scott Lahteine deff538909 Fix broken M100_dump_routine 2019-12-19 21:02:14 -06:00
Scott Lahteine 10f7bbee32 Use MYSERIAL0 (not SerialUSB) for Malyan LCD 2019-12-19 19:53:06 -06:00
Scott Lahteine b49a0e39d5 HOME_USING_SPREADCYCLE is obsolete
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 16:02:57 -06:00
Scott Lahteine 53f77dfadf Remove obsolete TMC2209 comment 2019-12-19 15:56:52 -06:00
Scott Lahteine 937dca4432 Followup to TMC2209 spreadcycle patch 2019-12-19 15:54:44 -06:00
BigTreeTech bbe0ffb2fa BigTreeTech SKR v1.4 support (#16236) 2019-12-19 02:41:35 -06:00
Jason Smith 1bad8f1b17 Improve pulse timing and step reliability (#16128) 2019-12-19 02:38:48 -06:00
Mario Costa 5f06f42ccd Spindle/Laser pins for RADDS (#16119) 2019-12-19 02:37:07 -06:00
elementfoundry e5edbf9d35 Allow TMC2209 to save/restore spreadCycle (#16153)
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 02:23:54 -06:00
Scott Lahteine 865071a946 Tweak code formatting 2019-12-19 02:16:17 -06:00
Moshi Binyamini dcdaa2025f Sanity-check Z_STEPPER_AUTO_ALIGN coordinates (#16231) 2019-12-19 00:59:01 -06:00
Scott Lahteine 0400783444 Tweak G34, fix a declaration 2019-12-19 00:42:39 -06:00
Scott Lahteine 768a1d2713 [cron] Bump distribution date 2019-12-19 00:39:55 -06:00
Scott Lahteine 262ff9584c [cron] Bump distribution date 2019-12-16 00:00:04 -06:00
Scott Lahteine af4c62b422 Update product links 2019-12-15 20:58:31 -06:00
Vertabreaker e0c71344ed Define more FAN pins for GT2560 (#16235) 2019-12-15 20:28:55 -06:00
chzj333 42a336f8bc Update BTT002 platform (fixing SD init) (#16217) 2019-12-15 12:24:54 -06:00
Tanguy Pruvot a0badf572e STM32 Touch UI timings, Longer onboard pullups (#16219) 2019-12-15 12:03:39 -06:00
thisiskeithb a358b72ec8 Add SKR Mini E3 + Zonestar LCD warning (#16214) 2019-12-15 12:02:20 -06:00
danym21 6e8dcba698 Fix G28 debug line, M569 calls (#16213) 2019-12-15 12:00:00 -06:00
Luc 9d6b2ebf50 Improve ESP32 HAL (EEPROM, watchdog) (#16228) 2019-12-15 11:39:39 -06:00
thisiskeithb dc8d8cb39c Fix MKS SGen-L SD detect pin (#16224) 2019-12-15 11:25:07 -06:00
Luu Lac 509e1ab053 TOUCH_MI_DEPLOY_XPOS fallback to X_MIN_POS (#16226) 2019-12-15 11:21:39 -06:00
Luu Lac e9dadacf7b Fix bad #ifdef (#16227) 2019-12-15 11:16:36 -06:00
Scott Lahteine 6a514a1e8e Move status screen defines 2019-12-12 22:20:03 -06:00
Scott Lahteine 303ddb862a Tweak some config names 2019-12-12 22:18:04 -06:00
Scott Lahteine f3d64b7115 Cardreader read/write open methods 2019-12-12 18:46:49 -06:00
Bo Herrmannsen 98382fcea5 Include Z in SCARA steps feedrate (#16193) 2019-12-12 17:13:49 -06:00
iain MacDonnell 629c039eed Update M503 MBL G29 report (#16199) 2019-12-12 16:54:54 -06:00
randellhodges 2a7f1091ce Fix compile error (macro substitution typo) (#16194) 2019-12-12 16:51:35 -06:00
Anders Sahlman 3d4aa015a8 Add MKS Robin Mini EEPROM defines (#16203) 2019-12-12 16:35:46 -06:00
InsanityAutomation 7b512742f4 Tweak ExtUI Probeless Babystepping (#16177) 2019-12-12 15:51:56 -06:00
ManuelMcLure b065a60dd0 Onboard (always-on) pullups support (#16144) 2019-12-12 15:49:14 -06:00
thisiskeithb 98814e1c47 MKS 12864 OLED pins for SGEN-L (#16188) 2019-12-11 02:18:21 -06:00
André Kjellstrup c2342c3528 Use error message !! hints (#16145) 2019-12-11 01:46:11 -06:00
MangaValk 96cf556139 Fix multiple servos with STM32 (#16151) 2019-12-11 01:44:05 -06:00
MS1987 31fdaea269 Add MKS Robin Pro, MKS Robin Lite3 (#16163) 2019-12-11 00:23:47 -06:00
Scott Lahteine 1c48817a47 [cron] Bump distribution date 2019-12-11 00:00:04 -06:00
Scott Lahteine 0d52eaa875 Superscript 3 for mm3 2019-12-10 23:45:39 -06:00
Tanguy Pruvot 5ebef425ce Update french (objects, retract...) 2019-12-10 23:45:39 -06:00
Giuliano Zaro 5dfa152ba2 Update Italian language (#16147) 2019-12-10 23:38:14 -06:00
dagorel 1c4f672eae Formalize DAC percent strings (#16176) 2019-12-10 23:37:25 -06:00
Anders Sahlman 1bcd47e65f Correct MKS Robin Mini pins (#16178) 2019-12-10 23:32:11 -06:00
Antti Andreimann 1465fc0632 Fix controller and SD on Robin Nano (#16187) 2019-12-10 23:29:33 -06:00
Scott Lahteine 07a61057ba [cron] Bump distribution date 2019-12-10 00:11:19 -06:00
Scott Lahteine bb5717c5b3 [cron] Bump distribution date 2019-12-07 00:00:05 -06:00
Luu Lac f3155af444 Update AZSMZ LCD link (#16106) 2019-12-06 01:35:06 -06:00
Tanguy Pruvot ab61c09bff Improve touch buttons behavior (#16109) 2019-12-06 00:47:50 -06:00
Antti Andreimann b65ab21733 Fix compile error with disabled PIDTEMP (#16108) 2019-12-05 20:51:41 -06:00
randellhodges 7f8ca85e69 STM32F1 Flash-based EEPROM fixes (#16118) 2019-12-05 20:48:11 -06:00
Scott Lahteine f64649933f [cron] Bump distribution date 2019-12-04 01:57:33 -06:00
ManuelMcLure 68da497f35 Remove debug_out.h '#pragma once' (again) (#16098) 2019-12-04 01:29:02 -06:00
Vertabreaker 0832a60db3 EXP3D Imprimante Multifonction (#16079) 2019-12-03 06:52:38 -06:00
ellensp cb4cd76086 Fix TMC_SW_MOSI for BTT_SKR_MINI_V1.1 (#16081) 2019-12-03 06:44:36 -06:00
Scott Lahteine 6134bff81b Expand environments in platformio.ini 2019-12-02 21:19:23 -06:00
Scott Lahteine b2c670fd94 [cron] Bump distribution date 2019-12-02 00:00:04 -06:00
Scott Lahteine cb7817093f More serial macro cleanup 2019-12-01 22:23:36 -06:00
Scott Lahteine 9114a14eca Fix commas in EEPROM code 2019-12-01 21:59:58 -06:00
Vertabreaker 3874f4a097 Geeetech A30 / GTM32 support (#16071) 2019-12-01 21:25:45 -06:00
Luu Lac 01e4b0c067 Add Laser / Spindle bitmap for LCD (#16068) 2019-12-01 21:20:15 -06:00
Scott Lahteine 3dc49fd1c6 Split up hotend / bed drawing 2019-12-01 20:52:59 -06:00
InsanityAutomation 7126a5e5a7 Add Host Prompt Notification Method (#15942) 2019-12-01 17:39:28 -06:00
ManuelMcLure c061656659 Use PSU powerup delay for all powerups (#16065) 2019-12-01 17:36:49 -06:00
Scott Lahteine 25a7ceabdb Fix missing step_current_down semicolons 2019-12-01 17:30:22 -06:00
Scott Lahteine 9b6d2da9bf Fix debug out macros 2019-12-01 17:28:18 -06:00
Scott Lahteine 4718b8ad02 Add _P variants to debug_out 2019-12-01 13:32:32 -06:00
Felicia Hummel 6c2438deae Fix PSU_POWERUP_DELAY compile error (#16064) 2019-12-01 12:55:28 -06:00
brian park b258cc85bf Mostly Printed SCARA (MPSCARA) support (#15573) 2019-11-30 08:57:34 -06:00
hammerhead2k2 19f840a9b5 BTT SKR 1.3 pins for Anet Full Graphics LCD (#16047) 2019-11-30 08:21:54 -06:00
Scott Lahteine 83a4e8559c Followup to "optimize common strings" 2019-11-30 08:18:23 -06:00
InsanityAutomation b24b0f385f Add ExtUI Flow Rate method (#16048) 2019-11-30 07:23:53 -06:00
Felicia Hummel 690ed531b6 Configurable PSU power-on delay (#16050) 2019-11-30 07:17:24 -06:00
Scott Lahteine 27943f9e31
Multiple axis TMC OTPW step down (#16044) 2019-11-30 06:59:44 -06:00
Scott Lahteine 1ee648ecd2 Followup to "optimize common strings" 2019-11-30 06:55:32 -06:00
Scott Lahteine 0138c0b55b [cron] Bump distribution date 2019-11-30 00:00:04 -06:00
Scott Lahteine f83bc0aa13 Optimize common strings
Saves 128 bytes in testing with `mftest mega 1 -y`
2019-11-29 22:54:42 -06:00
Scott Lahteine 2d74c2042a Clean up whitespace, GTM32 pins 2019-11-29 20:05:32 -06:00
Chris Pepper e585c37d7d
Fix #16038 2019-11-29 16:44:11 +00:00
Vertabreaker 1803f672f8 Pins for GTM32 board variants (#16020) 2019-11-29 07:12:49 -06:00
BigTreeTech 441ee3e53f Add 'M114 E' to get E position (M114_DETAIL) (#16026) 2019-11-29 06:53:32 -06:00
Chris Pepper a63491e6eb Sanity check ADC pins and FAST_PWM_FAN with Servos (#16038) 2019-11-29 06:52:28 -06:00
Bob 0f2ee414db Update thermistornames.h (#16027) 2019-11-29 02:06:11 -06:00
Scott Lahteine 0f14e0e978 [cron] Bump distribution date 2019-11-29 00:00:06 -06:00
Bob 5a98c83eef Use MAX6675 SPI pins for MAX31865 over SPI pins (#16024) 2019-11-27 01:45:03 -06:00
Jason Smith 752a1e76ab Float ABL mesh boundaries, no probe position rounding (#16018) 2019-11-27 01:29:25 -06:00
Jason Smith ce9a4afe95 Better ST7920 timings for FYSETC S6 (#16022) 2019-11-27 01:26:21 -06:00
Scott Lahteine 289c5dcccb Fix boot screen sanity check 2019-11-27 01:10:23 -06:00
Scott Lahteine 98f83dc756 Add comments to G29 2019-11-27 01:05:22 -06:00
Dirk O. Kaar 0550f30790 Renkforce configuration updates (#16017) 2019-11-26 20:22:17 -06:00
Scott Lahteine 077eeaa0f4
Fix mixing extruder feedrate (#15905) 2019-11-26 18:03:59 -06:00
Vertabreaker 12417d087b E2 pins for GT 2560 v3 (#16016) 2019-11-26 17:43:27 -06:00
timeburn a5a143f944 Include host_actions.h in G34 (#16014) 2019-11-26 16:38:41 -06:00
George Fu cf1e19d167 Fysetc S6 support (#15850) 2019-11-26 16:15:03 -06:00
Dirk O. Kaar 1cea1687f3 Renkforce RF100 (V1), V2, XL, and XL Plus (#15695) 2019-11-26 14:06:23 -06:00
thisiskeithb f786cc5145 Revert default BTT STM32F103 environment (#16006) 2019-11-26 04:28:13 -06:00
madmattco 049e8d5963 Add VAKE / VAKE403D support (#15631) 2019-11-26 04:00:59 -06:00
Heilig Benedek 993802c404 Fix Ender 2 display SCK, BTN_ENC pins (#15997) 2019-11-26 03:48:21 -06:00
haschtl ff6518c0a8 Add PID_FAN_SCALING option (#15585) 2019-11-26 03:34:43 -06:00
lukasmatena 8ccfdaca02 Add M220 B/R with PRUSA_MMU2 (#15739) 2019-11-26 03:34:18 -06:00
Chris Pepper c1aac3a0c9 Fix delta_mm.e with zero extruders (#15996) 2019-11-26 02:58:17 -06:00
Marcio T 43d0391d82 Fix Touch UI message strings (#16004) 2019-11-26 02:56:25 -06:00
Robby Candra fc9f8d27eb Fix Progress / Remaining display on DOGM (#16005) 2019-11-26 02:55:22 -06:00
Jason Smith d0282e5ba8 Allow slop in position_is_reachable for delta (#16003) 2019-11-26 02:53:28 -06:00
Scott Lahteine 1d150e41b6 Reduce MMU2 code, add test 2019-11-26 02:15:31 -06:00
Robby Candra 55595d444d Use LCD_WIDTH for indexed string (#15979) 2019-11-24 19:06:23 -06:00
InsanityAutomation 2142beb2e5 Fix UI compile error in UBL (#15981) 2019-11-24 17:04:19 -06:00
Jason Smith c497a491f4 Fix a PID_EXTRUSION_SCALING menu item (#15988) 2019-11-24 17:01:14 -06:00
Scott Lahteine b11551c767
Touch UI updates for Cocoa Press (#15986) 2019-11-24 06:08:05 -06:00
Scott Lahteine 441e822fb3 LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE 2019-11-23 17:04:17 -06:00
Scott Lahteine 47c19aa2b3 Clean up probe accessors 2019-11-23 17:02:04 -06:00
pfillion42 4a5dee6356 (SKR 1.3) Assign DIAG pins for homing dir (#15972) 2019-11-23 16:20:13 -06:00
Denis Semenov 0fcd1f4a49 Fix HAS_CLASSIC_E_JERK and related issues (#15968) 2019-11-23 15:56:07 -06:00
Scott Lahteine 8f09d2e790 Add STM32F103RE_bigtree to Auto Build 2019-11-22 16:47:31 -06:00
Gustavo Alvarez b2a275891c Support RET6 in BTT SKR Mini (#15957) 2019-11-21 05:09:01 -06:00
Scott Lahteine bdd366b97c Update sensor -5 label 2019-11-21 04:57:57 -06:00
Jason Smith b904ba0f29 Improve Delta probing / calibration (#15887) 2019-11-21 03:26:00 -06:00
Jason Smith 4ede13e36a Fix G29 for updated meshCount type (#15960) 2019-11-21 03:19:56 -06:00
Bob 751cd1f533 MAX31865 temperature sensor (#15930) 2019-11-21 03:15:10 -06:00
Scott Lahteine 47e4e5f1db Update thermocouple comments 2019-11-20 23:51:51 -06:00
Roman Moravčík 5681017d0c Update Slovak language (#15953) 2019-11-20 17:41:14 -06:00
BigTreeTech ab8b24fdba Power Loss Recovery with a UPS (#15943) 2019-11-20 17:40:21 -06:00
Scott Lahteine ab9f0f2c4f Followup to meshCount patch 2019-11-20 04:57:04 -06:00
InsanityAutomation e81b946f06 Better singlenozzle stored fan speed menus (#15921) 2019-11-20 00:14:56 -06:00
Daniel Negut a3229b30ec Add Zonestar/Anet LCD for SKR mini E3 (#15931) 2019-11-20 00:06:26 -06:00
InsanityAutomation 798f34abcd Float XY probe offset followup (probe edge) (#15928) 2019-11-19 23:29:52 -06:00
Giuliano Zaro 31e329f143 Update Italian language (#15925) 2019-11-19 23:27:53 -06:00
Jason Smith 9906e96ffb Allow UBL G29 J1 with PAUSE_BEFORE_DEPLOY_STOW (#15934) 2019-11-19 23:26:38 -06:00
Evgeny-SPB 7116a8645c G34 logic / typo fix (#15938) 2019-11-19 23:25:07 -06:00
Giuliano Zaro aa89bb71f9 Fix MMU2 compile error (#15923) 2019-11-19 23:22:02 -06:00
TheAssassin 814d908a8a Ender-2 LCD on BTT SKR E3 (#15924) 2019-11-19 23:21:27 -06:00
InsanityAutomation 4d4e692c81 Match onMeshUpdate() index sign (#15920) 2019-11-19 23:16:43 -06:00
Luu Lac 4d9a5fef3b Update Vietnamese language (#15940) 2019-11-19 21:08:47 -06:00
Scott Lahteine 865055e07a [cron] Bump distribution date 2019-11-18 00:00:08 -06:00
Scott Lahteine 2bd6dc02d6 [cron] Bump distribution date 2019-11-17 00:00:06 -06:00
Robby Candra 40bbe58371 Use lcd_uint_t in lcd_put_u8str_ind_P (#15909) 2019-11-16 16:37:21 -06:00
Roxy-3D f19fa64e98
Eliminate multiple settings to extruder_duplication_enabled in G28
If the IDEX mode was previously set (via GCode or the LCD Panel) to a duplication mode...   It was lost after a G28 due to this redundant setting of 'extruder_duplication_enabled'. 

It is very important to the various use cases of IDEX machines that extruder_duplication_enabled is preserved across a G28.   The reason is this allows a person to use the LCD Panel to put the machine into a duplication mode, and then send a 'normal' part file to the printer and get two parts out of the process.
2019-11-15 15:42:01 -06:00
thisiskeithb 0f57818f2d Support 512K "RCT6" in BTT SKR Mini (#15890) 2019-11-15 02:51:26 -06:00
Scott Lahteine aa93e1f21a Update TMC_ADV examples 2019-11-15 02:15:10 -06:00
Scott Lahteine 27cb4db80e
Reduced string storage using tokens (#15593) 2019-11-14 20:30:30 -06:00
Lino Barreca bd321d4b7c Don't compile STM32 SoftwareSerial unless STM32 (#15894) 2019-11-14 05:21:23 -06:00
Scott Lahteine ac2d7ab14c Fix timers.h include 2019-11-14 04:47:53 -06:00
Scott Lahteine a022defe06 [cron] Bump distribution date 2019-11-14 00:00:12 -06:00
Scott Lahteine 3f4636e916 "nozzle_to_probe_offset" is obsolete 2019-11-13 03:07:54 -06:00
Scott Lahteine 602ca5dea6 No USE_M73_REMAINING_TIME without LCD_SET_PROGRESS_MANUALLY 2019-11-13 02:07:17 -06:00
Robby Candra fcfde7c2f5 Only assign CS/RX/TX on extra axes with SPI/UART (#15886) 2019-11-13 02:03:34 -06:00
Scott Lahteine a4709ba765
Store unscaled PID values in EEPROM (#15884) 2019-11-13 01:47:46 -06:00
Scott Lahteine 7e9c846ec3 Modify comment for unlimited E steppers 2019-11-13 01:45:50 -06:00
Jason Smith 9fd35c84ce SoftwareSerialM for SKR STM32F1 boards (#15875) 2019-11-12 22:16:54 -06:00
Jamie 32028902c3 Use max feedrate for joystick motion (#15870) 2019-11-12 21:01:04 -06:00
Giuliano Zaro bb93ea1be4 [SAMD51] Activate ADCs oversampled 12bits (#15874) 2019-11-12 20:59:17 -06:00
Roman Moravčík e110f5abce M73 R : Set Remaining Time (#15549) 2019-11-12 19:36:54 -06:00
Lino Barreca ac71cdc265 New HardwareTimer for STM32 5.7.0 (#15655) 2019-11-12 19:23:02 -06:00
Chris Pepper 4762dfe797
Fix lpc u8g i2c (#15876) 2019-11-12 01:59:36 +00:00
Chris Pepper af61f37b65
Update lpc176x requirements (#15869) 2019-11-11 03:25:56 +00:00
ManuelMcLure b9703fdf36 Ensure TMC + LIN_ADVANCE pulse length (#15807) 2019-11-10 19:04:28 -06:00
Scott Lahteine 5e5045c4ee Touch UI finishing touches 2019-11-10 18:52:53 -06:00
Marcio Teixeira 5639b8ca20 Touch UI fixes for Cocoa Press (#15847) 2019-11-10 18:49:41 -06:00
danym21 28e1614c2e Add Sensorless Homing current (#15690) 2019-11-10 18:45:06 -06:00
Chris Pepper 86d0bc1af5
Update lpc176x framework version requirement (#15868) 2019-11-10 23:30:28 +00:00
LinFor 48b7a1e66e Allow non-zero "fan off" PWM value (#15709) 2019-11-10 16:33:56 -06:00
Jason Smith 770adcfa15 Raise Z before homing X/Y on unknown Z (#15859) 2019-11-10 16:21:20 -06:00
Scott Lahteine 624336f453 Fix up Megatronics 3.2 test 2019-11-10 16:19:57 -06:00
ellensp 7b29c60c46 Fix compile with chamber enabled (#15862) 2019-11-10 16:15:08 -06:00
Scott Lahteine 534f2d69c1 [cron] Bump distribution date 2019-11-10 00:00:04 -06:00
Jademalo 37874a6472 Fix E0_SERIAL_RX_PIN typo (#15841) 2019-11-09 22:51:20 -06:00
Marcelo Cerri b9d351899a Update SKR mini E3 1.2 Filament Runout pin (#15843) 2019-11-09 22:49:33 -06:00
Scott Lahteine 7010f92c4b Board-based LCD delays 2019-11-09 22:33:38 -06:00
Scott Lahteine 9ca25118d0 Whitespace cleanup 2019-11-09 21:17:52 -06:00
Jason Smith b3f81eead5 Fix/improve TURBO_BACK_MENU_ITEM (#15856) 2019-11-09 19:27:30 -06:00
Scott Lahteine 776632c503
Add and apply REPEAT macro (#15829) 2019-11-09 17:59:04 -06:00
Scott Lahteine 8061836e74 Fix Lulzbot tag 30: "Heaters Off" 2019-11-08 03:57:34 -06:00
Scott Lahteine 249f600ceb [cron] Bump distribution date 2019-11-08 00:00:03 -06:00
Marvin Sinister 8d157a4520 Fix MKS MINI12864 on SKR 1.3 (#15836) 2019-11-07 19:39:08 -06:00
Luu Lac ed6bbe012b Fix incomplete 'Homing XYZ' screen draw (#15830) 2019-11-07 19:14:02 -06:00
AnHardt 4db68d704f Update Display Throttling (#15837) 2019-11-07 19:04:19 -06:00
Scott Lahteine bb5b1e19b0 Function-style stepper macros 2019-11-07 17:14:36 -06:00
thisiskeithb 47805e18f8 Makefile catch-up (#15823) 2019-11-07 02:14:40 -06:00
Scott Lahteine 0be9fdb455 Move single-use to lambdas 2019-11-07 00:28:33 -06:00
Scott Lahteine 84ce3a6bea LCD corner screen handler lambda 2019-11-07 00:24:16 -06:00
Scott Lahteine 711703dcd1 [cron] Bump distribution date 2019-11-07 00:00:06 -06:00
LinFor a84e3d1b80 Use native ADC resolution where possible (#15719) 2019-11-06 17:49:17 -06:00
Miroslav Šustek 9201197878 Fix SKR E3 board BLTOUCH + SPEAKER timer conflict (#15781) 2019-11-06 17:34:29 -06:00
Jason Smith 814a2eaf8f Allow TMC baud rate override (#15773) 2019-11-06 17:08:12 -06:00
teemuatlut d9b0b964be Fix TMC2208 HW Serial constructor (#15782) 2019-11-06 16:57:48 -06:00
Axel 786617e375 Fix RAMPS + VIKI i2c (#15811) 2019-11-06 16:52:28 -06:00
Scott Lahteine e6dfc991ae Patch tabs, heater led tests 2019-11-06 16:28:36 -06:00
Scott Lahteine a89f4703df Tweak permissions 2019-11-06 16:10:14 -06:00
Roman Moravčík 41b5d720e2 Fix filament Change heading on LCD (#15783) 2019-11-06 15:58:06 -06:00
Luu Lac 4ee3502c8f Fix "confused intellisense" (#15817) 2019-11-06 15:54:09 -06:00
Scott Lahteine f5b5b9e8ec Bring filament menu up to speed 2019-11-05 17:16:12 -06:00
ellensp f088c6a850 Add MKS_GEN_L_V2 controller support (#15793) 2019-11-04 16:31:27 -06:00
aleknest cf87d3c700 More compatible uint8_t for Experimental i2c Bus buffer (#15788) 2019-11-04 16:28:16 -06:00
Scott Lahteine e9805a0bcb Go to previous menu on object cancel 2019-11-04 16:13:10 -06:00
Scott Lahteine 51fd226a4d Unconfuse intellisense 2019-11-04 15:40:56 -06:00
Scott Lahteine d80ef43c19 Followup to es int patch 2019-11-04 15:40:45 -06:00
Giuliano Zaro 35cd545106 Use prior endstop pin-to-interrupt macros (#15771) 2019-11-04 15:24:41 -06:00
Scott Lahteine 328ddda654 Clean up whitespace 2019-11-04 13:23:26 -06:00
Scott Lahteine 55991962be Patch extra axis MS pins for debugging 2019-11-04 12:28:10 -06:00
Chris Pepper b9116d4050
LPC176x Framework update (#15722)
Changes required for compatibility with framework-arduino-lpc176x 0.2.0
2019-11-03 02:34:09 +00:00
Scott Lahteine 15f94e5ee5 Add NUL_STR global 2019-11-02 07:31:07 -05:00
Scott Lahteine ea3217cd46
Move 'draw' methods into Menu Item classes (#15760) 2019-11-02 07:28:20 -05:00
ManuelMcLure 76b861d759 Fix kill screen with null string (#15747) 2019-11-02 07:13:42 -05:00
Robby Candra 7360e9343a Minor DOGM status screen fix (#15746) 2019-11-02 07:04:31 -05:00
Robby Candra bdb452ed81 Fix missing % on DOGM Status Screen (#15748) 2019-11-02 07:01:50 -05:00
Giuliano Zaro 65ef774e8d Fix mega Port J endstop interrupts (#15758) 2019-11-02 06:59:38 -05:00
Scott Lahteine a920b10483 Fix true/false redefined warnings 2019-11-02 06:04:28 -05:00
Scott Lahteine ed8f1ca9cf Revert Cortex delay for now 2019-11-02 04:12:18 -05:00
Scott Lahteine ca6d00b862 Save some string flash 2019-11-02 00:48:05 -05:00
Scott Lahteine 23d21dd81c Tweak lambdas 2019-11-02 00:05:23 -05:00
Scott Lahteine a7d7f36871 [cron] Bump distribution date 2019-11-02 00:00:05 -05:00
Scott Lahteine 93db4f4535 Tweak backtrace.cpp include 2019-11-01 22:08:33 -05:00
Scott Lahteine f0d952d33a
Cortex M3-M7 can use DWT->CYCCNT (#15762)
Suggested by Alex Kenis at https://youtu.be/ZfyPcdhQnAA?t=502
2019-11-01 22:07:51 -05:00
Scott Lahteine ad28da7eb4 Patch ABL G29 loop
Followup to e3ddf6e81a
2019-11-01 15:39:05 -05:00
Scott Lahteine 288af0ddf6 Whitespace 2019-11-01 15:39:05 -05:00
Scott Lahteine e7d9db284e Followup to M240 patch 2019-10-31 17:27:19 -05:00
Raúl Lázaro Sánchez 7c60853219 Fix blocking delay in Photo G-code M240 (#15728) 2019-10-31 17:14:11 -05:00
The-Force c6f694a247 Power Loss Recovery for volumetric extrusion (#15734) 2019-10-31 14:09:37 -05:00
Scott Lahteine 4e6e02bc3e Include pause.h for M701-702 2019-10-31 13:18:50 -05:00
Scott Lahteine e3ddf6e81a Fix meshCount signed-ness 2019-10-31 13:18:50 -05:00
Scott Lahteine 899e0fcdbb [cron] Bump distribution date 2019-10-31 00:00:07 -05:00
Scott Lahteine 35b1149d96 Patch es int tests for Arduino 1.8.10 2019-10-30 15:52:02 -05:00
Scott Lahteine c80eda073f M119 => report_states 2019-10-30 15:24:10 -05:00
LinFor 7d24f152d8 Fix a typo breaking the build (#15726) 2019-10-30 15:10:08 -05:00
Scott Lahteine 61225e685d Abort SD followup 2019-10-29 17:04:49 -05:00
Scott Lahteine d5c1c72a76 Tweak CW/CCW bitmaps 2019-10-29 16:53:07 -05:00
Scott Lahteine aaf018e5a0 Language changes 2019-10-29 16:20:35 -05:00
Scott Lahteine 583fc4ee2a Move abortSDPrinting with others 2019-10-29 16:00:28 -05:00
Scott Lahteine c5713b5e98 Clean Endstops::event_handler 2019-10-29 15:58:26 -05:00
Scott Lahteine be498d6280 [cron] Bump distribution date 2019-10-29 00:00:05 -05:00
Aurawin b09b469dd5 Add BIQU TANGO V1 support (#15682) 2019-10-28 18:21:59 -05:00
studiodyne 319e2b5760 Fan menus fix. FR cosmetic change. (#15714) 2019-10-28 16:49:31 -05:00
studiodyne f139642e0f XY/Z Babystep Multiplicators (#15691) 2019-10-28 16:44:17 -05:00
Scott Lahteine ade76e53de Fix A10M/A20M mixer display
Co-Authored-By: 3Dangel <3dangel@users.noreply.github.com>
2019-10-28 16:26:54 -05:00
InsanityAutomation cc4d3a215e Fix ExtUI UBL method calls (#15704) 2019-10-28 15:50:27 -05:00
InsanityAutomation d4f5821cd6 Fix 3-point sanity check (#15696) 2019-10-28 15:46:59 -05:00
Scott Lahteine 9aff30da0c
Confirm object cancellation (#15660) 2019-10-27 19:50:21 -05:00
Scott Lahteine 78899fc241 Followup to E Total 2019-10-27 18:40:33 -05:00
Scott Lahteine 7a342ecb93
Show Total E during print (#15703) 2019-10-27 17:49:27 -05:00
Scott Lahteine 0f8c3ed29a Prevent extra "too long/cold" errors 2019-10-27 17:40:07 -05:00
Scott Lahteine 9720d21301 Clean up trailing whitespace 2019-10-27 15:32:29 -05:00
Scott Lahteine 9e8021d6a4 Fix pins debug of CS/MS pins 2019-10-26 18:46:39 -05:00
Scott Lahteine ab0fe1a7dd Tweak G29 faux point 2019-10-26 14:41:54 -05:00
Giuliano Zaro 6fd13879ae Update Italian language (#15676) 2019-10-26 12:54:59 -05:00
Scott Lahteine 600429a067 Cancel Objects followup 2019-10-25 20:08:45 -05:00
Roman Moravčík e690471739 Print startup message after print statistics are loaded (#15664) 2019-10-25 19:46:56 -05:00
Scott Lahteine 732bf89878 Get 'cancelable' for gcode.cpp 2019-10-25 19:38:23 -05:00
Tanguy Pruvot c58cc113dd MKS Robin: restore the TFT v2.0 support (ST7789V) (#15675) 2019-10-25 19:30:43 -05:00
Scott Lahteine 014b739bac Fix M486 int parameters 2019-10-25 19:19:33 -05:00
Scott Lahteine f8ad15fde8 Rename BOARD_STM32F4 to fix use with MB() 2019-10-25 18:12:29 -05:00
Scott Lahteine 408751d5e0 Fix CANCEL_OBJECTS missing include 2019-10-25 15:45:55 -05:00
Evgeny Zyatkov 12a244f24f Fix #endif typo (#15661) 2019-10-25 12:27:23 -05:00
Scott Lahteine f12285015a [cron] Bump distribution date 2019-10-25 12:18:21 -05:00
Scott Lahteine 93f0012959
Cancel Objects - As seen at ERRF2019 (#15590) 2019-10-24 15:35:40 -05:00
Marcio T f6a799c7b3 Allow compile under Windows Subsystem for Linux (#15606) 2019-10-24 14:57:20 -05:00
InsanityAutomation 82fb046013 Allow suicide pin inverting (#15586) 2019-10-24 14:07:28 -05:00
Scott Lahteine 2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time (#15578) 2019-10-24 14:00:59 -05:00
Scott Lahteine 464d98d178 Short time prefixes, no percent prefix 2019-10-24 14:00:32 -05:00
Scott Lahteine ccf61eca84 Fix diplay elaspsed 2019-10-24 13:48:27 -05:00
Scott Lahteine ff4301a422
Update status_screen_DOGM.cpp 2019-10-24 13:42:02 -05:00
Scott Lahteine 326d5b84e7
Update status_screen_DOGM.cpp 2019-10-24 13:39:32 -05:00
Scott Lahteine 5edd5d1e1f
Clean up 2019-10-24 13:38:39 -05:00
Jacob Jordan 9895e6d766 Only use slow homing speed where applicable (#15640) 2019-10-24 13:14:45 -05:00
InsanityAutomation b3d7d33faf Fix CUSTOM_VERSION_FILE has_include (#15635) 2019-10-24 13:07:29 -05:00
Robby Candra cf8541a7a7 Fix G92.9 (thus PLR Z position) (#15625) 2019-10-24 13:05:50 -05:00
Scott Lahteine cd3ec5a77b Add error-check to M422 2019-10-24 12:59:50 -05:00
Timm e02b06672c Increase MMU2 serial buffer size with USB serial (#15646) 2019-10-24 12:28:41 -05:00
Giuliano Zaro 0f5d457252 Allow redundant temp sensor with SINGLENOZZLE (#15650) 2019-10-24 12:23:06 -05:00
Daniel Callander 475041656c Reset position_shift on G28 (#15653) 2019-10-24 12:20:09 -05:00
Bo Herrmannsen 04a55c9188 Fix LPC176x build script for Python 3 (#15637)
Co-Authored-By: Sven Holzmann <powerprobot@users.noreply.github.com>
2019-10-24 12:16:02 -05:00
milkpirate 6bcd4eb12d Fix M420 (UBL) undefined variables (#15621) 2019-10-24 12:07:17 -05:00
Luu Lac efeb6efe77 Set pullup on BTN_BACK pin (#15654) 2019-10-24 12:04:45 -05:00
Evgeny-SPB b7db91c46d Fix apply_rotation function (#15636) 2019-10-24 12:02:27 -05:00
Luu Lac 0b0b822671 Add note: TMC2209 requires stealthChop for Sensorless Homing (#15658) 2019-10-24 11:58:37 -05:00
Roxy-3D 3642a12fc1
fix parameter order of mark, marked and unmark
The parameter order was wrong on mark(), marked() and unmark().    

This was breaking the G26 Mesh Validation algorithm.
2019-10-23 11:34:24 -05:00
Scott Lahteine af214ff121 Fix up PSU_CONTROL checks 2019-10-22 16:16:12 -05:00
Scott Lahteine 62b875f918 Fix PLR condition saving retract 2019-10-22 16:16:12 -05:00
Robby Candra 2c42526763 FIx Estimation String Pos 2019-10-22 10:02:27 +07:00
Robby Candra d64ab63026 Fix Estimation String Macro 2019-10-22 08:16:29 +07:00
Scott Lahteine f00b48f9a8 Expand encoder value range 2019-10-21 18:56:24 -05:00
Scott Lahteine 160c8be191 Fix BABYSTEP_DISPLAY_TOTAL output 2019-10-21 13:53:19 -05:00
Robby Candra 52a8bbefcf Make sure estimate time = 0 not displayed 2019-10-20 23:44:05 +07:00
Robby Candra 6241bcf0c8 Fix Progress at the end of print. 2019-10-20 06:06:48 +07:00
Evgeny Zyatkov 9470554f63 Fix DUE HAL serial defines (#15594) 2019-10-19 12:30:38 -05:00
Robby Candra f368c14a61 Fix Probe Manually Grid (#15598) 2019-10-19 12:29:50 -05:00
Scott Lahteine f2ce4a25a3 Fix host_response_handler debug 2019-10-18 16:47:13 -05:00
Chris Pepper 11f1392026
Fix Python3 (Windows) compatibility (#15597) 2019-10-18 21:15:26 +01:00
Scott Lahteine 725ec68faa [cron] Bump distribution date 2019-10-18 00:00:04 -05:00
Robby Candra 16ae9ee88b Update Configuration_adv 2019-10-17 05:37:22 +07:00
Robby Candra 9b88c3e79b DOGM Progress Display, option to disable display rotation 2019-10-17 05:26:09 +07:00
Scott Lahteine 0652f19673 Fix M420 for moved probe methods 2019-10-16 15:56:34 -05:00
Scott Lahteine bb381e22b2 Fix left-shift warning 2019-10-16 15:42:46 -05:00
Bo Herrmannsen 0d7736d663 Enable M191 (#15531) 2019-10-16 15:02:37 -05:00
Antti Andreimann 40de135d4d Fix CUSTOM_USER_MENU_TITLE non-translated string (#15575) 2019-10-16 13:53:12 -05:00
Francois Rainville dd0c5de4c7 Provide LONG_FILENAME_LENGTH for headers (#15582) 2019-10-16 13:51:18 -05:00
Jason Smith 832cb7e1ac Z_STEPPER_AUTO_ALIGN — To align with Z stepper points (#15195) 2019-10-16 13:39:58 -05:00
Robby Candra 7af99d03d3 Don't show prefix if no elapsed time 2019-10-16 16:25:52 +07:00
Robby Candra bf850827f7 Fix Progress Display 2019-10-16 16:18:20 +07:00
Scott Lahteine e0e406dbcc [cron] Bump distribution date 2019-10-16 00:00:03 -05:00
InsanityAutomation b2eda1af2f Fix typo in G34 configuration (#15572) 2019-10-15 17:22:13 -05:00
Scott Lahteine 0ff57c640c Fix compile warning 2019-10-15 17:13:07 -05:00
Scott Lahteine 3949d246df Fix ESP32 name conflict 2019-10-15 17:13:07 -05:00
Scott Lahteine b7b303f4bf
Spindle/Laser power in planner blocks (#14437) 2019-10-15 16:10:20 -05:00
Jason Smith 53abfdc2c3 Fix BLTOUCH and FAN PWM conflicts on SKR E3 boards (#15547) 2019-10-15 14:18:46 -05:00
Slawomir Ciunczyk 8668571bee Update Polish language (#15569) 2019-10-15 13:36:17 -05:00
Scott Lahteine faacfe13c2 Tweak M105 layout 2019-10-15 13:35:13 -05:00
Antti Andreimann d47f29bd4c Give a dummy response to M105 with zero thermistors (#15568) 2019-10-15 13:30:52 -05:00
Piotr fe4c69b64a Poll *all* enabled endstop pins (#15525) 2019-10-15 13:28:04 -05:00
Slawomir Ciunczyk 99f983d066 Update Polish language (#15541) 2019-10-15 12:34:18 -05:00
InsanityAutomation 0074d63962 Vendor version override (#14189)
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 12:32:44 -05:00
Scott Lahteine 7622973a31
Fix elapsed time overflow warning 2019-10-15 11:47:24 -05:00
Scott Lahteine d57a668097
Update Spanish Translation (#15556) 2019-10-15 11:38:57 -05:00
Markus Towara 437978d349 Bring SPI_SENSORLESS code up to date (#15560) 2019-10-15 11:34:45 -05:00
Tanguy Pruvot a988f9304d reduce the required size with uint16_t modifiers 2019-10-14 20:11:59 +02:00
Tanguy Pruvot 21867c7fef elapsed time overflow warning fix
tried to fix it with snprintf in libs/duration_t.h but its worst... :/
2019-10-14 20:00:59 +02:00
sL1pKn07 d37bd33c31 Update Spanish Translation 2019-10-14 16:02:54 +02:00
Roman Moravčík b4f82d1081 Update Slovak language (#15527) 2019-10-13 17:35:38 -05:00
Tanguy Pruvot ee20f21a24 Fix undefined max in multi-language (#15521) 2019-10-13 18:31:28 -04:00
Giuliano Zaro 7714152013 Update Italian language (#15533) 2019-10-13 17:28:03 -05:00
Bo Herrmannsen 5ad9257df4 Fix DUE HAL serial defines (#15536) 2019-10-13 17:06:15 -05:00
Krystian Booker 62aa137548 Fixed pid_autotune_menu made pid_label accessible (#15551) 2019-10-13 16:46:06 -05:00
Roxy-3D 37550e9d98
Allow 3-digit LCD Display of value
The LCD Display shows 3 digits of precision, not 4.   
So change the bounding value to something more rational.
2019-10-13 14:34:51 -05:00
Roxy-3D 05eed72b69
Allow LCD Menu to adjust Junction Deviation lower
Allow LCD Menu to adjust Junction Deviation lower than .01.   Some machines currently have a JUNCTION_DEVIATION_MM value as low as .005 mm.     In the case of non-Linear-Advance machines...   The upper limit is raised to .5 mm.

Probably more thought needs to be given to the Linear Advance case.   It maybe it doesn't need a special case and should just use the same bounds as the non-Linear Advance case.
2019-10-12 17:36:43 -05:00
Gustavo Alvarez df09532a9c Reassign FIL_RUNOUT_PIN for ReARM boards (#15519)
Reassign FIL_RUNOUT_PIN from P1_18 to P1_19

P1_18 is connected to a buffer in order to output 5V making it unsuitable for input.
2019-10-12 21:02:20 +01:00
Haxk20 1df90aaf0e Followup to num2str update (#15518) 2019-10-11 08:45:15 -05:00
Matthew Piercey ac8083588b Add config for Wanhao Duplicator i3 v2.1 2019-10-11 00:59:58 -05:00
Robby Candra e79666a82b Followup to "Fix G2/G3 rounding" (#15510) 2019-10-10 21:16:37 -05:00
LinFor b20d5a7cc6 Estimate Remaining Time (graphical display) (#15497) 2019-10-10 21:03:33 -05:00
Scott Lahteine 5641adb01b Clean up stray tabs 2019-10-10 20:16:16 -05:00
Ed Williams d8aeeb8ff6 Fix G2/G3 rounding error (#15507) 2019-10-10 19:50:08 -05:00
Roxy-3D 2cf35267c4 Set Junction Deviation value from Jerk and Default Acceleration (#15509)
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
Robby Candra 6f60838736 Fix PAUSE_MODE_CHANGE_FILAMENT menu item (#15501) 2019-10-10 19:39:32 -05:00
Robby Candra ac466ecf74 Change Junction Deviation to Classic Jerk (#15505) 2019-10-10 19:31:59 -05:00
Scott Lahteine 3664beec29 Don't refresh on status line changes 2019-10-10 19:29:17 -05:00
Scott Lahteine 13cf417a98 [cron] Bump distribution date 2019-10-10 00:00:04 -05:00
ANMay-ru b119c14017 Clean up LCD print, align (#15498) 2019-10-09 20:41:44 -05:00
Jason Smith 46763efb75 Fix tool-change move with hotend offset (#15491) 2019-10-09 19:48:00 -05:00
Marcio Teixeira 6a865a6146 Multi-language support (#15453) 2019-10-09 19:46:10 -05:00
Marcio Teixeira dc14d4a13c Improvements and fixes to Lulzbot UI (#15490) 2019-10-09 19:44:49 -05:00
Scott Lahteine e6055dce76 Followup to position refactor 2019-10-08 22:08:05 -05:00
Scott Lahteine b4d48fdc91 Followup to #15481 2019-10-08 21:38:02 -05:00
Scott Lahteine af80653f3f Always report all PIDs in M503
Fix #14474
2019-10-08 21:07:19 -05:00
Scott Lahteine 914605c89c gcc is forgiving of stray ; 2019-10-08 20:36:39 -05:00
Scott Lahteine 89490171ef Use "concatenatable" language codes 2019-10-08 20:17:23 -05:00
Scott Lahteine c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
Scott Lahteine 1df6c7a46c Work around a compiler bug
See #15478
2019-10-08 19:27:03 -05:00
Scott Lahteine 5becda25c5 Followup to E renumbering 2019-10-08 17:37:17 -05:00
Scott Lahteine cb1cb72c76 Fix Move Z menu item 2019-10-08 17:24:40 -05:00
LinFor 58f81f8e7e Followup to progress override (#15488) 2019-10-08 15:24:14 -05:00
Scott Lahteine d45ab47139 [cron] Bump distribution date 2019-10-08 14:33:57 -05:00
Scott Lahteine 9dcccc11ba Fix extra condition 2019-10-07 22:36:49 -05:00
Scott Lahteine cc822c1a05
Use lambdas in menus, where possible (#15452) 2019-10-07 19:44:33 -05:00
Scott Lahteine 59508edf64 Suppress data[] array warning 2019-10-07 19:32:23 -05:00
Scott Lahteine e84389c976
Fix G2/G3 workspace plane parameters (#15475) 2019-10-07 17:09:20 -05:00
LinFor 19b7be067c Allow M73 to override SD position (#15449) 2019-10-07 16:38:58 -05:00
chzj333 d04561805b Support for BTT SKR Mini E3 v1.2 (#15476) 2019-10-07 15:45:11 -05:00
InsanityAutomation 71526fa5ce Fix ExtUI onMeshUpdate event (#15477) 2019-10-07 15:39:52 -05:00
Scott Lahteine 56595a4c9c Improve G2/G3 precision
See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253
2019-10-07 00:03:17 -05:00
Scott Lahteine 211ff67440 Patch blocking and manual moves 2019-10-06 23:58:19 -05:00
Tanguy Pruvot c6ffa7f38d MKS Robin: SD pins not required (SDIO) (#15474) 2019-10-06 23:20:43 -05:00
Scott Lahteine 519cc1bc67 NUM_AXIS is now obsolete 2019-10-06 22:18:16 -05:00
Scott Lahteine 9188ce1a8d Add JOIN for simple append 2019-10-06 22:01:06 -05:00
Scott Lahteine 51ae13fc8c Compact MIN/MAXTEMP_ALL 2019-10-06 21:58:58 -05:00
Scott Lahteine 5449088a8e Fix Japanese language extra define 2019-10-06 21:58:58 -05:00
Me No Dev fc6a0937b8 Improve Malyan M200 integration (#15462) 2019-10-05 22:37:22 -05:00
Giuliano Zaro a1ad01e4ab Limit Case Light PWM (#15459) 2019-10-05 22:32:50 -05:00
Scott Lahteine f8498d8a52 GET_TEXTF => GET_TEXT_F 2019-10-05 20:47:28 -05:00
LinFor e854eb933d Allow pins overrides for SKR V1.3 (#15451) 2019-10-05 20:40:01 -05:00
Jimmy Page 203d260a41 Update Japanese font and translation (#15470) 2019-10-05 20:35:20 -05:00
Daniel Andersen 0076e1e792 Fix CR10 Stock Display timing with SKR_PRO V1.1 (#15446) 2019-10-05 20:33:46 -05:00
Giuliano Zaro a3ec573984 Uniform fan speed & case light 2019-10-05 18:34:11 -05:00
Giuliano Zaro ff55601dc3 Update Italian language 2019-10-05 18:30:48 -05:00
Roman Moravčík b90dff020e Update Slovak language 2019-10-05 18:29:17 -05:00
Giuliano Zaro 43aba9f918 Fix compile errors & temp range 2019-10-05 18:27:03 -05:00
Scott Lahteine 1ac629f919 [cron] Bump distribution date 2019-10-05 00:00:09 -05:00
Luu Lac 5d81d7cefe
if no HOTENDS 2019-10-04 16:18:18 -05:00
Tanguy Pruvot 895f64fbab Add missing MKS Robin TOUCH_CS_PIN (#15445) 2019-10-04 01:51:07 -05:00
Scott Lahteine b7dfbb6af5 [cron] Bump distribution date 2019-10-04 00:00:05 -05:00
Scott Lahteine c83c2a5022 Patch compile glitches 2019-10-03 15:37:13 -05:00
Scott Lahteine 6b945eb548 Show "FILAMENT CHANGE" during filament change 2019-10-03 07:45:52 -05:00
Scott Lahteine 0322348924 Handle runout in runout.cpp 2019-10-03 06:27:30 -05:00
Scott Lahteine 72d791a736 Standardize active/paused functions 2019-10-03 06:27:30 -05:00
Scott Lahteine 719615a6b6 Simplify edit menu items
The `edit` part of menu items displaying values is not needed. Menu edit types can be modeled on sub-menus.
2019-10-03 06:27:30 -05:00
Scott Lahteine 273cbe931e Aliases for common menu item types 2019-10-03 06:15:21 -05:00
tonokip df48ef6df3 Fix step timer on Archim1 (#15447) 2019-10-03 03:29:15 -05:00
Scott Lahteine acbe84c8ef [cron] Bump distribution date 2019-10-03 00:00:05 -05:00
Scott Lahteine d0ef7b6588 [cron] Bump distribution date 2019-10-02 00:00:04 -05:00
Oliver Jean Eifler d52b908627 Fix coordinate size for G26 w/out arcs (#15443) 2019-10-01 20:02:27 -05:00
InsanityAutomation 438835f6a5 Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929) 2019-10-01 19:59:48 -05:00
Scott Lahteine f9400b6a3c [cron] Bump distribution date 2019-10-01 00:00:05 -05:00
Scott Lahteine 7cd72de8bc General cleanup, style 2019-09-30 22:57:23 -05:00
Scott Lahteine 806d64e1bf X_SENSORLESS includes AXIS_HAS_STALLGUARD 2019-09-30 22:56:22 -05:00
Scott Lahteine e3fd0519b3 Reduce need for UNUSED 2019-09-30 22:56:22 -05:00
Marcio Teixeira e3ff27c95a Prevent duplication of PSTRs to save memory (#15435) 2019-09-30 22:53:34 -05:00
LinFor 98f614ddb1 Use MAX_BED_POWER instead of BANG_MAX to heat outside PID_FUNCTIONAL_RANGE (#15431) 2019-09-30 22:19:12 -05:00
Marcio Teixeira 087fe0e9d6 Improve and fix LULZBOT_TOUCH_UI (#15434)
- Add start print confirmation dialog box
- Fix incorrect text colors in UI
- Adjust bio printer UI
2019-09-30 22:15:48 -05:00
Timm b198f321c8 Add missing motion inline methods (#15433) 2019-09-30 19:57:22 -05:00
Giuliano Zaro 15efe8d839 Update Italian language (#15436) 2019-09-30 19:31:06 -05:00
Scott Lahteine a9c259c77a Patch PrintrboardG2 build (on spec) 2019-09-30 02:47:55 -05:00
DrDitto 55b8547f04 Simplify MKS_MINI_12864 init (move 5ms to u8g seq.) (#15428) 2019-09-30 02:11:58 -05:00
Scott Lahteine b7a9481e01 [cron] Bump distribution date 2019-09-30 00:00:04 -05:00
Scott Lahteine 139b7196a0
Watchdog cleanup (#15283) 2019-09-29 17:57:29 -05:00
Scott Lahteine 24706aedbd Fix Neopixel typos 2019-09-29 17:36:29 -05:00
Scott Lahteine f307ff68f7 Multiply by float, not double 2019-09-29 17:25:27 -05:00
Scott Lahteine 74746c6573 Fix probe_offset EEPROM field test 2019-09-29 16:55:50 -05:00
Alex Somesan 10bbed7f69 Fix comma/semicolon typo (#15420) 2019-09-29 16:50:53 -05:00
Bob Kuhn 178dcd6fd8 SPI chaining with TMCStepper simplified interface (#15179) 2019-09-29 05:47:20 -05:00
Frederik Kemner 4564ad2920 Fix build if EXTRUDERS = 0 (#15417) 2019-09-29 04:32:24 -05:00
Scott Lahteine 50e4545255
Add custom types for position (#15204) 2019-09-29 04:25:39 -05:00
Tanguy Pruvot 43d6e9fa43 STM32F103.. reorganization, SKR mini fix (#15398) 2019-09-29 02:04:53 -05:00
Scott Lahteine 5e9898600b [cron] Bump distribution date 2019-09-29 00:00:07 -05:00
Scott Lahteine f2d93f61c3 Revert errant const 2019-09-28 23:52:54 -05:00
Scott Lahteine 7c5e6900e1 Tweak comment 2019-09-28 22:08:02 -05:00
Tim Moore 7e72768433 Info Menu: Runaway Watch state (#14827) 2019-09-28 21:53:40 -05:00
Scott Lahteine 81b9c7c6ee No motion constraint before homing
Sensible approach to soft endstops before the machine is homed.

Ref: https://github.com/MarlinFirmware/Marlin/pull/15027#issuecomment-533301094
Co-Authored-By: comps <comps@nomail.dom>
2019-09-28 21:35:49 -05:00
Christian ddded80ff3 Fix mixing for up to 6 steppers (#15374) 2019-09-28 19:12:23 -05:00
Scott Lahteine 8683d4abfd Improved list-oriented macros 2019-09-28 19:03:07 -05:00
InsanityAutomation 0ca6abce72 Add reporting to M290 (#15376) 2019-09-28 16:58:48 -05:00
InsanityAutomation e942b352c6 Fix Photograph Pin Sanity Check (#15406) 2019-09-28 16:18:23 -05:00
Ludy 41ea2d8c31 Fix auto-fan compile error (#15402) 2019-09-28 15:37:41 -05:00
InsanityAutomation be3c4a7930 Bring Raptor pins in parity with others (#15410) 2019-09-28 15:35:13 -05:00
Ludy f28f191ebf Trailing whitespace (#15403) 2019-09-28 15:32:37 -05:00
Ludy a628d77798 Fix compile error with 6 hot-ends (#15405) 2019-09-28 15:30:41 -05:00
Ludy 6509dc04f5 Fix German error (#15404) 2019-09-28 15:29:41 -05:00
Scott Lahteine 2277c6dffc
Optimize SD card reader, sorting (#15395) 2019-09-28 15:28:05 -05:00
Scott Lahteine 1834d86df5 Fix sanity check typos 2019-09-28 15:26:21 -05:00
InsanityAutomation a6b0223eea Revive and improve DELTA probe bounds, LRFB options (#15372) 2019-09-28 01:19:11 -05:00
Maxim 1b9fc64d8a Add M997 support for SKR PRO 1.1 (#15394) 2019-09-28 00:54:30 -05:00
Scott Lahteine f57ce2b40a [cron] Bump distribution date 2019-09-28 00:00:04 -05:00
Scott Lahteine ebfdf740bc EZBoard only knows stock display 2019-09-27 22:08:13 -05:00
InsanityAutomation 5221e2d991 Restore Host Prompt Info (#15387) 2019-09-27 17:06:26 -05:00
Marcio Teixeira 02bbc51195 Keep C extension for now, restore (void) arg (#15380) 2019-09-27 14:02:35 -05:00
Giuliano Zaro a8aca59c04 Update Italian language (#15373) 2019-09-27 13:05:53 -05:00
Scott Lahteine 4c16661153 Use named styles in draw_menu_item_static 2019-09-27 04:45:01 -05:00
Scott Lahteine d683f98019 Return buffer in duration.toString 2019-09-27 04:45:01 -05:00
Scott Lahteine dc65788511 Shorthand for __VA_ARGS__ 2019-09-27 04:43:34 -05:00
Marcio Teixeira a18d16fb8b Do not implicitly concatenate localized strings (#15383) 2019-09-27 04:38:43 -05:00
Scott Lahteine 62e4e05a19 [cron] Bump distribution date 2019-09-27 00:00:04 -05:00
Berezovskyi Oleksandr c0d5b57cf9 Init i2c for all i2c EEPROM use (#15366) 2019-09-26 22:25:56 -05:00
Scott Lahteine 665e45e0ba Reduce string storage, use masking 'seen' 2019-09-26 04:30:55 -05:00
Scott Lahteine 455dabb183
Add a feedRate_t data type (#15349) 2019-09-26 01:28:09 -05:00
Scott Lahteine ee7558a622 Tweaks to Z fade behavior 2019-09-26 01:15:47 -05:00
Scott Lahteine d49d40f7b0 Home XYZ newline 2019-09-25 22:26:16 -05:00
Scott Lahteine b72fd7ea9c Supply 'super' for servo subclasses 2019-09-25 22:07:14 -05:00
Scott Lahteine b2e1f77f58 Fix extraneous "Home XYZ First" message 2019-09-25 21:57:20 -05:00
Scott Lahteine 9a209012b5 Improve M114_DETAIL comment 2019-09-25 20:29:29 -05:00
Scott Lahteine 39578a5919 Fix probe without leveling 2019-09-25 19:57:52 -05:00
Marcio Teixeira 8cbb5350ad Refactor joystick support in ExtUI (#15318) 2019-09-25 18:46:36 -05:00
DrDitto 04e4eb35be MKS_MINI, FYSETC RGB, backlight (#15334) 2019-09-25 18:41:04 -05:00
Scott Lahteine ddd9d9032a Fix option / string name conflict 2019-09-25 17:12:13 -05:00
Robby Candra c3f09e2b1b Set MAX_OVERSHOOT_PID_AUTOTUNE to 30 (#15257) 2019-09-25 09:43:00 -05:00
Jason Smith f98999ca20 Fix includes in RAMPS_DUO and RAMPS_SMART (#15321) 2019-09-25 09:42:03 -05:00
Scott Lahteine 0b4aedf13e Less use of "this" 2019-09-25 09:29:58 -05:00
Scott Lahteine 661c3cfc99 Fix mesh bounds for MBL 2019-09-25 09:05:46 -05:00
Scott Lahteine 25c4c2f24e Fix bool in M851 2019-09-25 08:39:11 -05:00
Scott Lahteine da1bda493e Apply Marlin conventions to M851 2019-09-25 03:57:16 -05:00
InsanityAutomation e9cf46a9a5 M851 XY 3 point followup (incomplete) (#15361) 2019-09-25 02:43:41 -05:00
Jason Smith 66d0221077 Fix build with more than 2 Trinamic E steppers (#15329) 2019-09-25 02:30:07 -05:00
Robby Candra 9c288a682d Followup to probe_at_point change (#15342) 2019-09-25 02:29:10 -05:00
Marcio Teixeira 149e9b733e Simplified ExtUI language selection (#15359) 2019-09-25 01:25:21 -05:00
Jason Smith 53124ca6b7 Fix 32-bit crash due to fwretract_settings_t pack(1) (#15333) 2019-09-25 01:08:30 -05:00
Scott Lahteine bd6d144cdb [cron] Bump distribution date 2019-09-25 00:00:04 -05:00
Scott Lahteine 5288c399ce Patch probe offset name, defines 2019-09-24 23:39:23 -05:00
Scott Lahteine 4e8d9fe59b zprobe_offset => probe_offset 2019-09-24 23:36:09 -05:00
Scott Lahteine 3819f79945 Fix pid_output declaration 2019-09-24 22:32:13 -05:00
InsanityAutomation df1e51258a Add M851 X Y probe offsets (#15202) 2019-09-24 21:29:21 -05:00
Scott Lahteine ebc9a8a0b0 ExtUI patch followup 2019-09-24 20:21:31 -05:00
Marcio Teixeira 4ff59d178d LULZBOT_TOUCH_UI extended character set (#15301) 2019-09-24 18:49:40 -05:00
Scott Lahteine bd2b44c4ed Require newest TMCStepper 2019-09-24 18:00:06 -05:00
Marcio Teixeira bafcd084cc LULZBOT_TOUCH_UI performance/cosmetic fixes (#15319) 2019-09-24 17:46:00 -05:00
Jason Smith 9aaa056286 Fix SCARA build from Arduino IDE (#15317) 2019-09-24 17:29:25 -05:00
Scott Lahteine 48e2f90304 Improve TMC sanity checks 2019-09-24 17:20:39 -05:00
Scott Lahteine 07eb213046 [cron] Bump distribution date 2019-09-24 00:00:11 -05:00
Scott Lahteine 5e13fe989f Rename some feedrate-oriented functions 2019-09-23 22:36:41 -05:00
Scott Lahteine 9e7e8e229c [cron] Bump distribution date 2019-09-23 00:00:08 -05:00
Scott Lahteine 6c62732ae1 Handle no Timer 3C 2019-09-22 21:50:18 -05:00
Scott Lahteine 7fc4f7b815 [cron] Bump distribution date 2019-09-21 00:00:13 -05:00
Scott Lahteine 13d725d24d Tweak debug messages 2019-09-20 23:35:22 -05:00
Jason Smith 6ed2bf631d Fix FILAMENT_RUNOUT_SCRIPT without ADVANCED_PAUSE_FEATURE build (#15313) 2019-09-20 00:50:11 -05:00
Jason Smith 514223f960 Fix BACKLASH_COMPENSATION compiler issues (#15307) 2019-09-20 00:48:41 -05:00
Scott Lahteine de78b61d35 [cron] Bump distribution date 2019-09-20 00:00:10 -05:00
InsanityAutomation 6a312fae80 Add before/after dir change delays (#15314) 2019-09-19 23:05:17 -05:00
Scott Lahteine 1803c27afb Fix macros for overloaded comparisons 2019-09-19 02:16:40 -05:00
Scott Lahteine 86e0b9eb05 [cron] Bump distribution date 2019-09-19 00:00:08 -05:00
Marcio Teixeira 7f117bfc60 EXTENSIBLE_UI Joystick support (#15303) 2019-09-18 19:35:03 -05:00
Jason Smith 252f31b6f1 Fix/improve backoff feedrates (#15300) 2019-09-18 17:04:13 -05:00
Scott Lahteine bcf630d8d1 Clarify a sanity check 2019-09-18 16:43:30 -05:00
Scott Lahteine c44b5fd13a Try to fit logo by narrowing icons 2019-09-18 16:43:30 -05:00
Scott Lahteine d5a34afa56 Undefine pins only in debug list 2019-09-18 11:53:42 -05:00
Scott Lahteine 712aaa26d5 Use provided 'constrain' 2019-09-18 04:07:14 -05:00
Scott Lahteine 1a1375964f Drop unused G26 function 2019-09-18 04:07:14 -05:00
Robby Candra 787d522036 LCD Size Defines (#15297) 2019-09-18 02:58:58 -05:00
Marcio Teixeira b590ae4875 LULZBOT_TOUCH_UI: Only use %S on AVR (#15292) 2019-09-18 02:33:26 -05:00
Scott Lahteine ce74e4b3e4 Undefine… redux 2019-09-18 00:28:26 -05:00
Scott Lahteine 356b582a9f [cron] Bump distribution date 2019-09-18 00:00:05 -05:00
Scott Lahteine b73744f9e7
Update ExtUI, add test under DUE (#15298) 2019-09-17 23:41:34 -05:00
Scott Lahteine b39ab3db37 Sanity-check for SD reprint 2019-09-17 23:34:14 -05:00
Scott Lahteine 34d521234d Undefine pins to reduce warnings 2019-09-17 23:34:14 -05:00
Scott Lahteine 73ac213cdd Fix FileList::isAtRootDir 2019-09-17 23:34:14 -05:00
Scott Lahteine b71a755a30 Add float suffix in G33 2019-09-17 23:30:27 -05:00
Scott Lahteine c353eaa146
Misc changes from struct refactor (#15289) 2019-09-17 18:16:28 -05:00
Tanguy Pruvot 7c3d52cd6b HAL_DUE build fix (#15286) 2019-09-17 04:51:27 -05:00
Scott Lahteine 2405ccb7ef Patch use of UNUSED 2019-09-17 00:05:35 -05:00
Scott Lahteine 282c39e3d0 [cron] Bump distribution date 2019-09-17 00:00:06 -05:00
Tanguy Pruvot d277e93f4d Configurable TOUCH_BUTTONS repeat delays (#15245) 2019-09-16 21:32:55 -05:00
Scott Lahteine f01f0d1956 Drop C-style 'void' argument 2019-09-16 20:31:21 -05:00
Scott Lahteine 7d8c38693f Formatting 2019-09-16 20:31:21 -05:00
Scott Lahteine a06010e08a Macrofy attachInterrupt 2019-09-16 20:31:20 -05:00
Marcio Teixeira 4c00ddae56 Remove obsolete LULZBOT_TOUCH_UI code (#15284) 2019-09-16 19:45:05 -05:00
Robby Candra 98233b1de0 Add root flag to CardReader (#15275) 2019-09-16 17:49:55 -05:00
Tanguy Pruvot eb1a368277 Fix Lerdge K typos (#15273) 2019-09-16 16:50:57 -05:00
Marcio Teixeira 7a569ad4d0 LULZBOT_TOUCH_UI fixes. Fix some warnings. (#15276) 2019-09-16 16:49:46 -05:00
Bas Stottelaar 847e4ced11 Fix M43 without watchdog (#15280) 2019-09-16 16:09:43 -05:00
Scott Lahteine 7e95ee9e4b Patch missing millis 2019-09-16 15:57:25 -05:00
Scott Lahteine d63e0f6d98 Pending refactor tweaks 2019-09-16 15:10:14 -05:00
Scott Lahteine 9c218381c5 [cron] Bump distribution date 2019-09-16 00:00:05 -05:00
J.C. Nelson 896162b722 Add pins for Lerdge X and K. (#15271) 2019-09-15 15:23:04 -05:00
Giuliano Zaro c96844fae2 [SAMD51] Remove RuRamps4D (#15264) 2019-09-15 14:17:20 -05:00
Tanguy Pruvot 02d400e413 STM32F1: Sync SPI changes from maple master (#15266) 2019-09-15 13:46:17 -05:00
Scott Lahteine 20fbb751f1 Tell externals it's Marlin 2019-09-15 03:12:44 -05:00
Scott Lahteine d5f5203880 Use "mount" as card verb 2019-09-15 03:12:44 -05:00
Tanguy Pruvot 2386c147ad Mount the SD card early (#15255) 2019-09-15 03:05:01 -05:00
Scott Lahteine c4090b1375 [cron] Bump distribution date 2019-09-15 00:00:05 -05:00
Scott Lahteine 79635f8e94 Fix some debug out lines 2019-09-14 16:45:06 -05:00
Scott Lahteine 843a19102c Shorten an option description 2019-09-14 16:45:04 -05:00
Marcio Teixeira 18821f29d5 LULZBOT_TOUCH_UI: Localization, runtime language selection (#15249) 2019-09-14 06:51:49 -05:00
Tanguy Pruvot 15bea5043c Followup to SD menu optimization (#15252) 2019-09-14 06:42:28 -05:00
Evgeny Zyatkov 61e3f119f4 FYSETC_MINI_12864 pins for SKR PRO 1.1 (#15253) 2019-09-14 06:22:30 -05:00
Scott Lahteine 3d0ead7dcb Bring Configuration_adv.h up to date 2019-09-14 04:30:17 -05:00
Scott Lahteine 465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor (#15256) 2019-09-14 03:05:10 -05:00
Scott Lahteine ffb418b226 Move some SD comments 2019-09-14 02:31:47 -05:00
Robby Candra acd76e8609 Allow odd mm bed sizes (#15258) 2019-09-14 01:26:14 -05:00
Scott Lahteine bbbfb0015b [cron] Bump distribution date 2019-09-14 00:00:14 -05:00
Scott Lahteine ef8ce2e2e5 Allow TEMP_CHAMBER_PIN override 2019-09-13 18:45:59 -05:00
Scott Lahteine f9961ddebb Optimize SERIAL_ECHOPAIR_F 2019-09-13 08:47:41 -05:00
Frederik Kemner 3348a7d223 Fix Info Menu with EXTRUDERS==0 (#15230) 2019-09-13 01:36:44 -05:00
Tanguy Pruvot 2435c6082a STM32F1: AUTO_BED_LEVELING_UBL build fixes (#15240) 2019-09-13 01:33:33 -05:00
Scott Lahteine ae7ae89bb3 [cron] Bump distribution date 2019-09-13 00:00:04 -05:00
Robby Candra 3f129b6574 Touch Buttons variable repeat delay (#15236) 2019-09-12 22:14:24 -05:00
Tanguy Pruvot 5bf635cec2 STM32F1: Only include USBComposite if flagged (#15243) 2019-09-12 18:35:27 -05:00
Robby Candra 1ab3521351 Optimize Media Menu display/scrolling (#15233) 2019-09-12 18:06:07 -05:00
Tanguy Pruvot f1162243f6 STM32F1: No USBSerial without USB-serial bridge (#15242) 2019-09-12 17:59:31 -05:00
Scott Lahteine 7cf1befbec [cron] Bump distribution date 2019-09-12 00:01:23 -05:00
Scott Lahteine 1d574b0f6a Tweak config spaces 2019-09-11 17:32:54 -05:00
Tanguy Pruvot 3eacc3bfce french update, g26, usb (#15229)
french update for G26 and USB.
2019-09-11 14:36:39 -05:00
Gustavo Alvarez 2b628553d3 Update Spanish language (#15189) 2019-09-11 12:14:10 -05:00
reloxx13 05cd483413 STM32F1: Support M997 - Reset and begin flash (#15209) 2019-09-11 12:12:58 -05:00
Scott Lahteine e3278f22f3 General formatting 2019-09-11 03:29:00 -05:00
Scott Lahteine f9992c5f33 Implausible 2019-09-11 02:52:14 -05:00
Scott Lahteine 3648bce886 Tweak NOZZLE_CLEAN_START_POINT spacing 2019-09-11 01:50:24 -05:00
Scott Lahteine 6091e6300a
Fix G90, G91, M82, M83 rel/abs modes (#15218) 2019-09-11 01:29:33 -05:00
Scott Lahteine 41a3fbceac [cron] Bump distribution date 2019-09-11 00:00:04 -05:00
Marcio Teixeira 47d19bab40 Lulzbot ExtUI Western language support (#15208)
Fix #15134
2019-09-10 20:07:03 -05:00
Scott Lahteine c590e8ac05
Improve Power-loss Recovery (#15135) 2019-09-10 18:52:41 -05:00
Scott Lahteine 75927e17dd
Filament Width Sensor singleton (#15191) 2019-09-10 18:48:58 -05:00
Scott Lahteine fe6ba4fd70 Tweak REMEMBER 2019-09-10 02:21:21 -05:00
Scott Lahteine 584c86bed1
More "zero extruders" changes (#15213) 2019-09-10 02:20:49 -05:00
Scott Lahteine 54abf3aeba [cron] Bump distribution date 2019-09-10 00:00:06 -05:00
InsanityAutomation dcc39421c5 Minor Pin Updates (#15214) 2019-09-09 23:58:57 -05:00
thisiskeithb 66338ed515 CR-10 Stock Display for SKR Mini 1.1 (#15215) 2019-09-09 23:56:02 -05:00
Scott Lahteine f055f7c535 Add emergency_parser.h dependency 2019-09-09 18:04:25 -05:00
Scott Lahteine 841c8ce0d9
Remove PROMPT_INFO / PROMPT_GCODE_INFO (#15210) 2019-09-09 15:43:06 -05:00
Ludy 3c3a956a17 Fix compiling error BIGTREE_SKR_MINI (#15197)
Let's get STM32F1 working again!
2019-09-09 10:34:54 -05:00
Scott Lahteine 565a0e11ed Prevent 'current' name conflict, if needed 2019-09-09 03:17:11 -05:00
Scott Lahteine 713157f712 Move L6470 enum 2019-09-09 00:27:53 -05:00
Scott Lahteine 5949c24afc [cron] Bump distribution date 2019-09-09 00:00:05 -05:00
Scott Lahteine dbea6f0022 STM32F1 USB cdc/msc composite device (#15180)
Co-Authored-By: bigtreetech <38851044+bigtreetech@users.noreply.github.com>
2019-09-08 02:28:22 -05:00
Luu Lac 8bca3fcf2c Display chamber with HAS_TEMP_CHAMBER (#15194) 2019-09-08 02:20:18 -05:00
Roman Moravčík ca0f47985b Update Slovak language (#15187) 2019-09-08 01:47:36 -05:00
InsanityAutomation 0693767efa ExtUI Pause/Stop on all Pause/Stop (#15188) 2019-09-08 01:47:07 -05:00
Scott Lahteine 1c3a1ab2c6 Use _MIN over MIN 2019-09-08 01:02:15 -05:00
Lucio Tarantino 8ac52aedff M118 multiserial support (#15176) 2019-09-08 00:57:59 -05:00
Jamie dbee0e9c54 Analog joystick jogging control (#14648) 2019-09-08 00:55:34 -05:00
Ludy 068c303742 More translatable LCD strings (#15190) 2019-09-08 00:15:25 -05:00
Tanguy Pruvot ec3f29a33a Fix linux_native long to int32 warnings (#15192) 2019-09-07 20:30:47 -05:00
ManuelMcLure eed7c2fe2f Fix 'echo:' in TMC parameters M503 report (#15193) 2019-09-07 20:29:38 -05:00
Ludy 6172cd2528 CHAMBER integration to GLCD (#14981) 2019-09-07 04:52:57 -05:00
Scott Lahteine 94948d3dcb Compact some sanity conditions 2019-09-06 19:03:04 -05:00
Scott Lahteine a3052da703 Move manual move to lcd section 2019-09-06 18:24:39 -05:00
AnHardt b7b0021b5c Fix Thermistor 75 (#15181) 2019-09-06 16:23:27 -05:00
Scott Lahteine ca1a3476cb [cron] Bump distribution date 2019-09-06 00:00:04 -05:00
Scott Lahteine 91c3b8e3ca Reformat ADC cases 2019-09-05 20:02:31 -05:00
Scott Lahteine 4cdf7a1b93 Add ADC helpers to temp_info_t 2019-09-05 19:48:52 -05:00
Scott Lahteine 72876d9045 Clean up u8g defines 2019-09-05 17:09:24 -05:00
Scott Lahteine 8d036e94bf Combine channel-based SPI headers 2019-09-05 17:09:24 -05:00
Scott Lahteine 70b3f4ded5 Pins error message 2019-09-05 15:44:13 -05:00
Ludy 01fd3f904f Drop extra include (#15171) 2019-09-05 13:21:06 -05:00
Tanguy Pruvot 50e1bf57b9 Fix RRD/CR10 LCD on STM32F1/F4 (#15172) 2019-09-05 13:20:03 -05:00
Scott Lahteine 18dd5cb46a Config comment patch 2019-09-05 01:48:12 -05:00
Scott Lahteine bf3cd8e5aa Tweak var names 2019-09-05 01:40:09 -05:00
Scott Lahteine 37d3c7288f [cron] Bump distribution date 2019-09-05 00:00:04 -05:00
Scott Lahteine 7496e1cd67 whitespace 2019-09-04 21:55:41 -05:00
Scott Lahteine 060b360be3 Provide a good default contrast
In reference to #15139
2019-09-04 18:29:22 -05:00
kakou-fr 6b1c4dec46 Touch Mi: Add magnet Y position (#15166) 2019-09-04 18:09:12 -05:00
Tanguy Pruvot 85f0556118 Add XPT2046 calibration functions (#15140) 2019-09-04 17:32:20 -05:00
Scott Lahteine cff502c6d4 Tweak REPRAPWORLD_KEYPAD config comment 2019-09-04 17:23:38 -05:00
Ludy beffcd856b Update German language, (c) (#15164) 2019-09-04 16:59:26 -05:00
Karl Andersson 123ecfe613 Allow MINIMUM_STEPPER_PULSE override with LV8729 (#15162) 2019-09-04 16:57:13 -05:00
Scott Lahteine 2d2d9da9f2 Tweak u8g impl file includes 2019-09-04 14:52:22 -05:00
Scott Lahteine a07c4af393 Tweak animated draw call 2019-09-04 14:47:08 -05:00
Scott Lahteine 7ad5208267 Fix up boot screen code
Followup to #15125

Co-Authored-By: Ludy <ludy87@users.noreply.github.com>
2019-09-04 14:43:32 -05:00
Robby Candra 6b05d5d65d Allow TOUCH_BUTTONS to be swapped (#15100) 2019-09-04 13:13:05 -05:00
George Fu 8e044ea898 Fix up Fysetc configs, pins. Fix menu type float5. (#15157) 2019-09-04 13:06:23 -05:00
Jamie 293b890940 Apply soft limits to G2/G3 final target (#15156) 2019-09-04 13:02:30 -05:00
Scott Lahteine 2563e32aa3 Format FWRETRACT config comments 2019-09-04 12:48:50 -05:00
Scott Lahteine d9bbe0ff02 [cron] Bump distribution date 2019-09-04 00:00:03 -05:00
thisiskeithb d577b3c21e Fix MKS SGEN-L Pins (#15153) 2019-09-03 20:02:30 -05:00
AnHardt 89a2161cac MINIMUM_STEPPER_DIR_DELAY in LA (#15154)
Add missed MINIMUM_STEPPER_DIR_DELAY after dir change in LinearAdvance interrupt.
2019-09-03 20:01:51 -05:00
Scott Lahteine 75efa3cdac
Reorganize HAL (#14832) 2019-09-02 19:49:58 -05:00
thisiskeithb cdd5056aba Increase MKS MINI 12864 default contrast (#15139) 2019-09-02 19:40:58 -05:00
Scott Lahteine c97c393c4a
Fix "unqualified id" warning (#15144) 2019-09-02 19:35:05 -05:00
Scott Lahteine 12344085c0
Update temperature.cpp 2019-09-02 19:21:47 -05:00
Giuliano Zaro 12c595c61f SAMD51 LCD support (#15113) 2019-09-02 05:45:02 -05:00
Scott Lahteine 23bb40d0ea Fix MKS_MINI_12864 init
See #13550

Co-Authored-By: DrDitto <drditto@users.noreply.github.com>
2019-09-02 05:24:36 -05:00
Giuliano Zaro 9958f5e322 Home on G34 if steppers slept (#15127) 2019-09-02 02:44:48 -05:00
thisiskeithb 59152f2671 Flash-based EEPROM on SKR Mini E3 DIP (#15128) 2019-09-02 02:42:11 -05:00
Tanguy Pruvot c9817105fb Update French language (#15129) 2019-09-02 02:40:33 -05:00
Giuliano Zaro e6a114b853 Update Italian language (#15130) 2019-09-02 02:39:40 -05:00
Gustavo Alvarez 54069823a0 Update Spanish language (#15132) 2019-09-02 02:36:32 -05:00
Scott Lahteine 93dcc22aae Drop extra call to get_available_commands 2019-09-02 01:14:03 -05:00
Scott Lahteine 451a942e95 Suspend queue during wait_for_hotend 2019-09-02 01:14:03 -05:00
Scott Lahteine b4715b29bb [cron] Bump distribution date 2019-09-02 00:00:04 -05:00
Scott Lahteine 34b73426e5 Apply #ifdef/#ifndef where possible 2019-09-01 23:54:50 -05:00
Scott Lahteine 4078f2672e Apply shorthand option macros 2019-09-01 23:43:48 -05:00
Scott Lahteine a2e412c0ce Rename command buffer var 2019-09-01 20:43:31 -05:00
weakset ee240d21b9 Use Flash-based EEPROM on SKR mini-E3 (#15126) 2019-09-01 04:04:40 -05:00
Jason Smith be051c890f Fix Z_STEPPER_ALIGN_[XY] sanity error (#15124) 2019-09-01 04:00:20 -05:00
Scott Lahteine 586b334c2a
Split up stepper indirection (#15111) 2019-08-31 19:44:45 -05:00
Scott Lahteine 87b16ed5f6 Bring Configuration.h up to date 2019-08-31 07:03:51 -05:00
Scott Lahteine 66f1da762f Use 'ui.' where possible 2019-08-31 01:07:01 -05:00
Robby Candra 26fa08548c Add RGB565 Color Definitions for TFT (#15099) 2019-08-30 22:49:24 -05:00
Scott Lahteine 0f4d3e1bca Fix ESP32 "DISABLED" name conflict 2019-08-30 22:37:28 -05:00
Scott Lahteine 1eeef30097 A single generate_click lambda 2019-08-30 19:17:59 -05:00
Tanguy Pruvot c014f8dc78 Fix STM32F1 SPI warning (gcc 8.2.1) (#15104) 2019-08-30 18:15:04 -05:00
Tanguy Pruvot d068470e18 Prevent Linux min/max error (#15107) 2019-08-30 17:46:09 -05:00
Bob Kuhn ba91bca1eb TMC SPI daisy chain support (experimental) (#15081) 2019-08-30 17:39:45 -05:00
Scott Lahteine 0bcb64403c Revert _BV testing commit
This reverts commit 9223261ea9.
2019-08-30 16:11:16 -05:00
Scott Lahteine 05ef9b2f55 [cron] Bump distribution date 2019-08-30 14:44:39 -05:00
Scott Lahteine 9223261ea9 Only define _BV in Marduino.h 2019-08-29 18:06:24 -05:00
Scott Lahteine d25231aea8 Spacing, defined(), #include tweaks 2019-08-29 18:06:24 -05:00
Karl Andersson 7ebfae27e3 Fix HAL_STM32 SPI regression (#15093)
Reference: 0b47558
2019-08-29 17:00:01 -05:00
thisiskeithb f5a1fabd38 Clarify TMC2209 Sensitivity vs. Others (#15092) 2019-08-29 16:57:56 -05:00
Ludy 3f77d6a551 Fix expire_status warning (#15094) 2019-08-29 16:05:22 -05:00
Robby Candra 38983fdfa9 Add 'Back' Button for Touch TFT 320x240 (#15060) 2019-08-29 01:19:07 -05:00
Scott Lahteine 8196ced2de Leave LCD_PINS_Dn defined for other uses
Fix #14998
2019-08-29 00:57:20 -05:00
AlexandrZloy 0ebaea94be Add stallGuard threshold for X2 (#15042) 2019-08-29 00:15:31 -05:00
Scott Lahteine e1d65b8937 [cron] Bump distribution date 2019-08-29 00:00:03 -05:00
Tanguy Pruvot ca5da026d6 dogm: u8g prototypes cleanup (#15082) 2019-08-28 23:49:51 -05:00
Scott Lahteine a61c91ae9e Use 'bugfix' branch of U8glib-HAL 2019-08-28 21:39:18 -05:00