muele-marlin

Author	SHA1	Message	Date
KiteLab	0ad25c6665	Hint for changed behaviour of SDSUPPORT	2015-09-28 11:07:33 -05:00
Richard Wackerbarth	e01f5e1ef7	Cleanup	2015-09-17 10:44:23 -05:00
Mike Cochrane	5e36b64635	SDEXTRASLOW for some SD card readers (PR#176) Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL	2015-09-14 07:58:08 -05:00
Scott Lahteine	5d65a36dee	Give lcd_sd_status an UNKNOWN state (PR#180)	2015-09-14 06:32:27 -05:00
fmalpartida	0f149ea0c6	LCD home button causes repeated homing (PR#175) Fix: increased debounce delay.	2015-09-14 06:31:49 -05:00
Scott Lahteine	b825567e0f	Drop www. from marlinfirmware.org (PR#175)	2015-09-14 06:28:53 -05:00
Scott Lahteine	db27e67580	Apply PID_ADD_EXTRUSION_RATE to extras	2015-09-12 07:53:20 -05:00
Scott Lahteine	bc50db9cf6	Implement PID_ADD_EXTRUSION_RATE	2015-09-12 07:53:20 -05:00
Scott Lahteine	cffb2d457e	Cleanup file formatting	2015-09-12 07:48:27 -05:00
Scott Lahteine	7ac7ddbf20	Show nozzles, heaters, and extruders numbered 1-4	2015-09-12 07:40:18 -05:00
Scott Lahteine	5bc480fee8	Fix Move E menu items	2015-09-12 07:33:49 -05:00
Scott Lahteine	fc882c34a3	Init lcd_sd_status as false to force lcd_update test Replaces #145 which is way out of date	2015-09-12 07:32:20 -05:00
Scott Lahteine	e27dd5c22d	Conditionalize functions that rely on SDSUPPORT	2015-09-12 07:30:09 -05:00
Scott Lahteine	fabf3ae4a0	Add final Z raise after Delta probe	2015-09-12 07:23:24 -05:00
Petr Zahradnik	8c768a76a2	Create language_cz.h Czech language translation.	2015-09-12 07:18:05 -05:00
Petr Zahradnik	5b9010965d	Update language.h Added comment for Czech language (associated with file language_cz.h).	2015-09-11 04:43:54 +02:00
Scott Lahteine	89fb778684	Fix up probe pin define and test	2015-09-10 10:54:03 -05:00
Scott Lahteine	558665cd90	Constrain Tune > Nozzle/Flow menu items	2015-09-10 08:47:11 -05:00
Scott Lahteine	9f462f0cf5	Hack to address stuttering caused by ISR not finishing in time (PR #138) When the ISR does not finish in time, the timer will wrap in the computation of the next interrupt time. This hack replaces the correct (past) time with a time not far in the future.	2015-09-10 08:26:17 -05:00
Scott Lahteine	8b3d63c423	Unify Delta XYZ homing rates As noted in #130 allen key probe stow rate is based on homing rates, but homing rates were left out of most delta configs. This unifies the XYZ homing rates and applies the unified rates to allen key movements.	2015-09-08 13:11:55 -05:00
Scott Lahteine	7c72b57313	Unify manual feedrate and Fix LCD MANUAL_FEEDRATE (PR#128) As noted by @o-lampe at https://github.com/MarlinFirmware/MarlinDev/issues/114#issuecomment-136757614 the `MANUAL_FEEDRATE` for Delta Z should be the same as XY.	2015-09-08 13:11:55 -05:00
Scott Lahteine	f690b82343	Remove extra MAX_FREQ_TIME define (PR#148)	2015-09-08 13:11:12 -05:00
Scott Lahteine	a4c78ae786	Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z	2015-09-07 09:41:06 -05:00
Scott Lahteine	a39fadf876	Update kossel-pro example config (again?)	2015-09-07 09:41:06 -05:00
Scott Lahteine	34e0a8d848	Move Y2 and Z2 pins defines to pins.h	2015-09-07 09:41:06 -05:00
Scott Lahteine	28599c51c7	Wrap Dual Y options in a conditional	2015-09-07 09:41:05 -05:00
Scott Lahteine	11a065c0ca	Remove Z2 pins overrides from Configuration_adv.h	2015-09-07 09:41:05 -05:00
Scott Lahteine	f7f6b5faae	Fix lcd_move_e compile error (PR#143) Fix a compile error introduced in #98	2015-09-07 09:36:05 -05:00
Scott Lahteine	2b30e8ac99	Conditionals for ULTIPANEL without SDSUPPORT	2015-09-06 02:04:49 -05:00
Scott Lahteine	7c7a4051fe	Disable SDSUPPORT by default As noted in #133 you can’t disable `SDSUPPORT` with `MAKRPANEL`, `PANEL_ONE`, `MINIPANEL`, or `ULTIPANEL`. This patch makes it possible to disable `SDSUPPORT` on these controllers and then disables it by default. Users of these controllers will now need to enable `SDSUPPORT` in their configurations as others currently do.	2015-09-06 02:04:49 -05:00
Eric Kuzmenko	b23d765991	Added Extrude From Multiple Extruders from LCD feature	2015-09-05 05:33:18 -05:00
Christian Lefrançois	8347a9d6e4	Fix HOMING_BUMP_DIVISOR for deltas configuration * Re-bump speed divisor should be the same for delta printer.	2015-09-03 09:26:28 -05:00
Scott Lahteine	703df2cb6c	Fix error message for probe region sanity check	2015-09-03 03:27:47 -05:00
Shane Francis	4c8330c15c	Trim Adjustments for Delta Configurations	2015-09-03 01:05:33 -05:00
Scott Lahteine	962120d1d2	Fix spacing in some conditional blocks	2015-08-27 20:59:09 -05:00
Richard Wackerbarth	20b4772155	Create DEBUG_LEVELING_FEATURE	2015-08-27 20:52:08 -05:00
Scott Lahteine	194f98ff95	Debug messages for homing and leveling	2015-08-27 20:52:08 -05:00
Richard Wackerbarth	6292d9e815	Rename ENABLE_AUTO_BED_LEVELING With the introduction of the #if ENABLED(…) reads better than	2015-08-27 20:52:08 -05:00
Richard Marko	91fd66ffba	add Lulzbot TAZ4 example configuration (PR#104)	2015-08-27 08:36:43 -05:00
Wurstnase	7a275773ee	remove colon in utf_mapper.h (PR#106)	2015-08-27 07:15:23 -05:00
Chris Bruner	6b4b6fa315	update for newest version of U8glib_Arduino	2015-08-26 19:52:59 -05:00
Christian Lefrançois	9897a9147c	Update ABL comments (PR#95) * Updates the auto bed leveling comments ONLY. * Renames "Z probe" word usage in //comments and #errors properly.	2015-08-26 05:51:38 -05:00
Christian Lefrançois	a7822e3ff7	Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91) * Fix a couple of renames omission and macro expansion errors.	2015-08-20 06:04:46 -05:00
Richard Wackerbarth	ad90e851b3	Use a small unsigned integer type	2015-08-16 06:56:47 -05:00
Richard Wackerbarth	29b456ae07	Suppress some compiler warnings	2015-08-16 06:56:47 -05:00
Scott Lahteine	23d742bf06	Don't free the stack array plane_equation_coefficients (PR#83)	2015-08-16 06:53:24 -05:00
Scott Lahteine	e3b1e08777	Patch G30 to use raise_z_for_servo (PR#73)	2015-08-15 21:47:04 -05:00
Scott Lahteine	a1eb90d5c0	Save another 30 bytes in gcode_SET_Z_PROBE_OFFSET	2015-08-12 21:26:32 -05:00
Scott Lahteine	91122277f4	Reduce gcode_SET_Z_PROBE_OFFSET by 88 bytes	2015-08-12 21:26:25 -05:00
AnHardt	5707a2c3d5	indexindexIntoAB is only vald for !DELTA	2015-08-11 17:32:11 -05:00
AnHardt	d8860f9ad9	Alway end at the same point Always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION] Regardles the evennes of auto_bed_leveling_grid_points.	2015-08-11 17:32:11 -05:00
AnHardt	4ca8f4a9a7	Always zigzag Use the shortest way between probing-points.	2015-08-11 17:32:11 -05:00
AnHardt	3d23424121	Add array indexIntoAB[xx][yy] and use it.	2015-08-11 17:32:11 -05:00
AnHardt	e2d69f66b2	Make Z_PROBE a Z_MIN_PROBE (PR#65) Currently we use the probe exclusively as a device to find the build platform(bed). For the currently supported setups this means, we use it as a additional min-endstop. A triggered when not deployed probe disturbs the homing process for max-endstops. Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Adjust comments accordingly Remove Z_MAX check for the probe in update_endstops(). Using an delta related idea of @clefranc from #61, extended to the general change for all setups. Tested with Prusa i3, max-z-endstop and permanently triggered z-probe. Worked for @clefranc's delta.	2015-08-11 14:41:36 -05:00
AnHardt	6a6e863a47	Resolve #2581 by adding a missed ';' (PR#67)	2015-08-10 12:51:59 -05:00
RicardoGA	e09ff79635	Update pins_RAMPS_13.h (PR#64) Now all ramps configuration can enable Filament sensor not only EEB	2015-08-10 05:53:01 -05:00
Fourmi	e6aed7bb4e	Update thermistortables for Hisens Thermistor (PR#2588)	2015-08-09 18:11:14 -05:00
Richard Wackerbarth	9d8cc24abf	Continue from the line following the M999 (PR#60) If the printer is going to accept the M999, then it should continue from that line number.	2015-08-08 08:08:02 -05:00
wurstnase	f3ab1dba54	Z babystepping for coreXY (PR#47) only X and Y were not implemented	2015-08-04 20:10:09 -05:00
Richard Wackerbarth	35afea1c0e	Restore test PR#2572 Changed this because of faulty Boolean Logic NOT(A OR (NOT B) OR (NOT C)) != (NOT A) AND ((NOT B) OR C)) Besides, the compiler should be smart enough to optimize this without help from the programmer	2015-08-04 15:22:56 -05:00
Scott Lahteine	6af75f4b5d	Squish down deprecated tests in sanity check	2015-08-03 16:04:48 -05:00
Scott Lahteine	edeb58288e	Use PIN_EXISTS in sanity check	2015-08-03 16:04:48 -05:00
Scott Lahteine	c30b7693e0	Clean up RUMBA pins conditions	2015-08-03 16:04:48 -05:00
Scott Lahteine	46453905d6	Apply remaining ENABLED/DISABLED conditionals	2015-08-03 16:04:48 -05:00
Richard Wackerbarth	b227d8c128	Supply a VERSION in a short form for displays The long descriptor will still be available in M115	2015-08-03 08:21:09 -05:00
Richard Wackerbarth	cd7828a928	This will be the 1.1.0 Release rather than 1.0.3	2015-08-03 08:08:38 -05:00
Richard Wackerbarth	4e2f5618c1	Pick up Default_version when needed	2015-08-03 08:08:37 -05:00
Richard Wackerbarth	329acc852e	Canonize Option flag USE_AUTOMATIC_VERSION	2015-08-03 08:08:37 -05:00
Richard Wackerbarth	5a11d32a85	Move deprecation test to SanityCheck.h	2015-08-03 08:08:37 -05:00
Richard Wackerbarth	7bb7a52940	Bring config up-to-date	2015-08-03 07:35:33 -05:00
AnHardt	244ea2014a	Boot-screen for text-displays improvements Centred the logo for 16x4 and 20 x4. Moved version to the bottom line Code shrink to 704 bytes.	2015-08-03 07:13:00 -05:00
AnHardt	80f2a20842	Enable bootscreen in all Configurations	2015-08-03 07:13:00 -05:00
AnHardt	2684d061ed	Scroll too long strings on bootscreen	2015-08-03 07:13:00 -05:00
AnHardt	4f46df5dab	Make bootscreen configurable for the graphic displays Saves about 473 byte of progmem and 28 bytes of RAM.	2015-08-03 07:13:00 -05:00
AnHardt	09571b7753	Boot-screen for the character displays Uses about 488 byte of progmem and 32 byte of RAM. For that configurable.	2015-08-03 07:13:00 -05:00
Richard Wackerbarth	866efc14fe	Add Danish translations	2015-08-03 07:06:17 -05:00
Scott Lahteine	267f3479d7	Adjust spacing in pins_RAMPS_13.h	2015-08-02 23:26:58 -05:00
Scott Lahteine	56702e7bb9	Define servo pins just like other pins	2015-08-02 23:26:58 -05:00
Richard Wackerbarth	4b9d5cd352	Use lowercase names for serial instances	2015-08-02 23:01:39 -05:00
Scott Lahteine	1e2deff4fd	Rename BTENABLED to BLUETOOTH - For some reason it’s easy to forget what BT stands for, but it doesn’t need an abbreviation.	2015-08-02 22:56:50 -05:00
Scott Lahteine	68055a5959	Include RIGIDBOT_PANEL in Conditionals	2015-08-02 22:26:41 -05:00
George Djabarov	f8ed3a835d	Added comment with the RigidBot Big bed size	2015-08-02 22:13:37 -05:00
George Djabarov	7deae6b6be	Updated RigidBot example configuration - The default serial baud rate of 115200 - The regular RigitBot bed size 254mm/248mm/254mm - Single stock extruder - Stock termistors for extruder and hotbed - Stock Min X/Y/Z stops. Max stops not connected - Stock 32 teth tooleys (stock axis steps) - No auto bed leveling - No screen	2015-08-02 22:13:37 -05:00
Scott Lahteine	5418faa1f9	Add sanity checks for old names	2015-08-02 22:09:08 -05:00
Scott Lahteine	f03e063750	Rename BEEPER to BEEPER_PIN For consistency with other pins, allowing use of `PIN_EXISTS` macro.	2015-08-02 22:09:08 -05:00
Scott Lahteine	270c766de2	SDCARDDETECT -> SD_DETECT, added docs - `SD_DETECT_PIN` replaces `SDCARDDETECT` - `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED` - Revise the description of `SD_DETECT_INVERTED` - Add a note about the override of `SD_DETECT_INVERTED` in `Conditionals.h`	2015-08-02 21:59:41 -05:00
Scott Lahteine	496fc28dc3	Tweaks to pins comments	2015-08-02 21:34:13 -05:00
Scott Lahteine	8d3b74cc6e	Rename SDCARDDETECT to SDCARDDETECT_PIN - Rename the pin so it can be tested with `PIN_EXISTS` - Fix some incorrect tests for `SDCARDDETECT`	2015-08-02 21:34:13 -05:00
Scott Lahteine	0f5ada8cbd	Group the fail case in one negation (PR#2572)	2015-08-01 18:55:50 -05:00
AnHardt	7ddf1cda1d	Improve condition for SERVO_LEVELING (PR#2570)	2015-07-31 22:41:34 -05:00
Richard Wackerbarth	f32048b8f5	In for a penny, in for a pound	2015-07-31 17:13:53 -05:00
Scott Lahteine	e944f960de	Add a sanity check for old name "BEEPER"	2015-07-31 17:13:53 -05:00
Scott Lahteine	8ebf0b92be	Spacing adjustments in some pins files	2015-07-31 17:13:53 -05:00
Scott Lahteine	94a796c8cc	Rename BEEPER to BEEPER_PIN For consistency with other pins, allowing use of `PIN_EXISTS` macro.	2015-07-31 17:13:53 -05:00
Richard Wackerbarth	b217474eab	Compiler Complaints about concatenated tokens (PR#2566)	2015-07-31 17:08:44 -05:00
Scott Lahteine	2460f82d8b	Make proper distinction between BEEPER and HAS_BUZZER	2015-07-31 01:24:33 -05:00
Scott Lahteine	58cfcd4239	Overridable Options - Part 5 Apply `ENABLED` / `DISABLED` macros to files needing only a small number of changes.	2015-07-31 01:24:20 -05:00
Scott Lahteine	5e834352a9	Overridable Options - Part 11 (PR#2563) Apply `ENABLED` / `DISABLED` macros to EEPROM-related files.	2015-07-31 01:07:04 -05:00
Scott Lahteine	bf6eb93c61	Overridable Options - Part 10 (PR#2562) Apply `ENABLED` / `DISABLED` macros to planner files.	2015-07-31 01:06:29 -05:00
Scott Lahteine	51e89a269c	Overridable Options - Part 9 (PR#2561) Apply `ENABLED` / `DISABLED` macros to temperature-related files.	2015-07-31 01:05:55 -05:00
Scott Lahteine	c35fb88094	Overridable Options - Part 8 (PR#2560) Apply `ENABLED` / `DISABLED` macros to stepper-related files.	2015-07-31 01:05:22 -05:00
Scott Lahteine	0d8989fc14	Overridable Options - Part 7 (PR#2559) Apply `ENABLED` / `DISABLED` macros to LCD-related files.	2015-07-31 01:04:37 -05:00
Scott Lahteine	b4abb0ae7f	Apply ENABLED / DISABLED to Marlin core files (PR#2558)	2015-07-31 01:03:58 -05:00
Scott Lahteine	c0d7ea3e7e	Overridable Options - Part 4 (PR#2556) Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.	2015-07-31 00:44:53 -05:00
Scott Lahteine	4b40964064	Overridable Options - Part 3 (PR#2555) Apply `ENABLED` / `DISABLED` macros to language-related files.	2015-07-31 00:19:13 -05:00
Scott Lahteine	32683b282b	Include configurator copies of configs	2015-07-31 00:03:36 -05:00
Scott Lahteine	37d1879386	Apply overridables to Configuration files	2015-07-31 00:03:36 -05:00
Scott Lahteine	9d151bb61b	servo_endstop_angles -> servo_endstop_angle	2015-07-30 23:35:57 -05:00
Scott Lahteine	9334479aeb	Minor cleanup of Conditionals.h	2015-07-30 23:35:57 -05:00
Scott Lahteine	1f63293624	servo_endstops -> servo_endstop_id	2015-07-30 23:35:57 -05:00
Scott Lahteine	edaaead7e0	Fix comment about SERVO_ENDSTOP_ANGLES	2015-07-30 23:35:57 -05:00
Scott Lahteine	ed4a6371ad	Add HAS_SERVO_ENDSTOPS to simplify conditonals	2015-07-30 23:35:57 -05:00
Scott Lahteine	70be61d416	Reset filament_size with a loop	2015-07-30 23:31:58 -05:00
Scott Lahteine	ae9274be05	Fix minor compiler warnings in for loops	2015-07-30 23:31:58 -05:00
Scott Lahteine	c7c8cfed6f	Complete M200 output with M503 - The contents of EEPROM include filament diameters even with Volumetric disabled. This change makes `M503` display the full volumetric settings so that playing back the output of `M503 S0` will fully restore them.	2015-07-30 23:31:58 -05:00
Scott Lahteine	4a58e447a1	Add array size to servo_endstop_angles (PR#2553)	2015-07-30 23:27:38 -05:00
Andrew Lenharth	a0ae9e30df	don't pass integer by reference, inefficient. (PR#2547)	2015-07-30 17:51:12 -05:00
AnHardt	d03f037a92	Get rid of malloc() and free() (PR#2549) Just the minimal changes to qr_solve.cpp and .h to get rid of malloc() and free(). Saves about 656 bytes of progmem (library-code) and 22 bytes for static variables. Should use exactly the same amount of stack as it did before on the heap.	2015-07-30 17:50:31 -05:00
Scott Lahteine	3b2b2313ff	Combine if block related to SERVO_ENDSTOPS	2015-07-30 16:39:05 -05:00
Scott Lahteine	0af2a80e06	Make SERVO_ENDSTOP_ANGLES 2-dimensional	2015-07-30 16:38:56 -05:00
Richard Wackerbarth	525d0dc239	Configurator is out-of-date AGAIN (PR#2550)	2015-07-30 16:36:01 -05:00
Richard Marko	dd22cbbfb8	makefile: add buzzer.cpp (PR#2479)	2015-07-30 07:56:44 -05:00
Scott Lahteine	9f48798ffd	Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542)	2015-07-30 07:55:29 -05:00
Richard Wackerbarth	ae00fad75b	Rename as M100	2015-07-27 20:31:59 -05:00
Richard Wackerbarth	a401d738df	There is an echo in here	2015-07-27 20:31:59 -05:00
Richard Wackerbarth	ed7d45e8f5	Memory watcher	2015-07-27 20:31:59 -05:00
AnHardt	d17f7ebc8a	Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535) instead of 1000. Else we get errors with times over 32 seconds.	2015-07-27 20:30:53 -05:00
Scott Lahteine	bea6739774	Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527)	2015-07-27 20:24:33 -05:00
Scott Lahteine	81bba7ed88	More sanity checking for extruder requirements (PR#2531)	2015-07-27 10:14:43 -05:00
AnHardt	87a97f3724	Fix conditions for display strings	2015-07-26 20:41:21 -05:00
AnHardt	aaccea0260	Shift some display only strings from language.h to lenguage_en.h and translate them to German.	2015-07-26 20:41:15 -05:00
Scott Lahteine	e4c01f1c7e	Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507)	2015-07-26 20:40:27 -05:00
Scott Lahteine	ab6f1fdf8b	Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528) As suggested in #2521 - Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is also required. - Add a note that endstops must be enabled for the feature to have any effect	2015-07-26 20:36:37 -05:00
Richard Marko	1183c10a2e	makefile: drop -q -q (much quiet) from avrdude flags Annoying when trying to figure out if uploading actually does something.	2015-07-26 20:31:31 -05:00
Richard Marko	0e064357f4	makefile: use /etc/avrdude/avrdude.conf on linux No need to look for arduino specific avrdude configuration as distributions ship their own avrdude.conf file that is compatible with arduino.	2015-07-26 20:31:31 -05:00
Scott Lahteine	bcb7d5a149	Improve sanitycheck for TEMP_SENSOR_1	2015-07-25 21:17:36 -05:00
Scott Lahteine	5b24f59401	Add sanity checks for temp sensors	2015-07-25 21:17:36 -05:00
AnHardt	fd0e81b0c7	Distinguish between BUZZER and SPEAKER (PR#2513) A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC. A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC. There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer. To make these board able to handle a speaker * replace the PWM based tone()-function again with a on-delay-off-delay loop. Hopefully the last time I touch the beeper code.	2015-07-24 22:10:04 -05:00
Scott Lahteine	e2957df05c	Shorthand for do_blocking_move_to	2015-07-24 22:07:41 -05:00
Scott Lahteine	819c5b9b50	Adjust comment on Z adjustment	2015-07-24 22:07:41 -05:00
Scott Lahteine	5a7356b6fc	Patch for G29 final Z position Include all the necessary pieces to get the final Z position after probing the bed, and add commentary about other possible changes.	2015-07-24 22:07:41 -05:00
AnHardt	088e09e052	Add forgotten Marlin_main.cpp	2015-07-24 22:04:49 -05:00
AnHardt	8b876241bd	Some more servo code tweaks Just set up the pin. Don't move to a random position. Simplify servo::move() * servo::move() does not need the pin parameter - The pin is set during servo_init() with attach(). * servo::move() does not need a return value. SERVO_LEVELING is the wrong condition to deactivate the servos. Remove some temporary (Servo *) variables. SanityCheck for the servo indexes.	2015-07-24 22:04:49 -05:00
Scott Lahteine	b116c096bd	Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512) Updates to `set_homing_bump_feedrate`: - Move the string into Program Memory, reduce length by 31 bytes - Use an auto to get the divisor, adjust it on error - Set feedrate once, at the end	2015-07-24 22:00:25 -05:00
Scott Lahteine	f7e7862588	Better Sanguinololu & Graphical Controller (PR#2504) - Change suggested at https://github.com/MarlinFirmware/Marlin/issues/2482#issuecomment-123553 266	2015-07-23 23:47:07 -05:00
Scott Lahteine	a1154d4a20	Enable Y and sanity-check CoreXZ (PR#2509)	2015-07-23 23:46:27 -05:00
Scott Lahteine	932f1c109e	Move servos to the top in pins_MEGACONTROLLER.h	2015-07-23 22:51:41 -05:00
Scott Lahteine	90f8ddfc1e	Apply MINIPANEL to other configs	2015-07-23 22:51:41 -05:00
AndySze	00dbf69b6d	add MINIPANEL defines	2015-07-23 22:51:40 -05:00
AndySze	8ac5e56934	fixed some format problems and cleaned code	2015-07-23 22:51:40 -05:00
AndySze	eef595aa64	add makerlab mega controller pin configs	2015-07-23 22:51:40 -05:00
AnHardt	4e14e152fa	Add Travis tests for CORXY and COREXZ	2015-07-23 19:52:48 -05:00
AnHardt	27d7d2ccab	Correct bracketing for COREXY-XZ	2015-07-23 19:52:21 -05:00
Scott Lahteine	469843427d	Reduce code in gcode_M81 (PR#2497)	2015-07-23 08:14:00 -05:00
Scott Lahteine	c66955aaf9	Mark unchanging arrays as const (PR#2494) The compiler may be able to optimize if it knows an array won’t be changing.	2015-07-22 21:37:37 -05:00
Scott Lahteine	278aa15301	Add COUNT macro and apply	2015-07-22 18:16:05 -05:00
Scott Lahteine	d85861d296	Move macros, add ENABLED/DISABLED, add includes	2015-07-22 18:16:05 -05:00
Scott Lahteine	17960fd2b0	Neaten up pins_MEGATRONICS.h (PR#2493)	2015-07-22 17:23:22 -05:00
Scott Lahteine	aac2b9aa9d	Reduce code in gcode_M84 (PR#2492) `gcode_M84` only needs to call `finishAndDisableSteppers`, which calls all the other functions.	2015-07-22 17:22:01 -05:00
Scott Lahteine	4971fa73f9	Add a sanitycheck error for old servo settings (PR#2491) - Documentation solution for #2476	2015-07-22 16:35:10 -05:00
Scott Lahteine	96ace72ddc	Servos attach/detach based only on servo config Assuming #2470 fixed up the main issue.	2015-07-22 16:34:26 -05:00
Richard Wackerbarth	b80a6a8d31	Correct Kossel Pro Configuration_adv (PR#2473)	2015-07-22 16:32:08 -05:00
Scott Lahteine	000a6fce46	Extract update_endstops from stepper ISR (PR#2474)	2015-07-19 18:33:18 -05:00
Scott Lahteine	e83eac312e	Move plan_arc next to prepare_move	2015-07-19 16:18:46 -05:00
Scott Lahteine	5c5936508d	G2/G3 Arcs for Delta - Update prepare_move_delta to take a target argument - Add Delta support to plan_arc	2015-07-19 16:18:46 -05:00
Scott Lahteine	9f53e2f0c9	Implement COREXZ in stepper.cpp and planner.cpp	2015-07-19 16:17:03 -05:00
Scott Lahteine	fa00e1d97f	Explode conditions common to corexy and cartesian	2015-07-19 16:17:03 -05:00
Scott Lahteine	c7dd5527b4	Add a C_AXIS and Z_HEAD to support COREXZ	2015-07-19 16:17:03 -05:00
Scott Lahteine	129f986ccf	Add COREXZ option to configurations	2015-07-19 16:17:03 -05:00
Scott Lahteine	69b0490b77	Show minimal preheat options in menus (PR#2471)	2015-07-19 16:14:59 -05:00
Scott Lahteine	eacfe132aa	Change the name of servos[] and servo_t	2015-07-19 11:35:48 -07:00
Scott Lahteine	3b23ccd366	Patch servos code for move - Have `Servo::attach` explicitly return -1 if it fails - Check for -1 in `Servo::move` because `servoIndex` might be 0 - Make `attach` / `detach` calls conditional on `SERVO_LEVELING` - Move `SERVO_LEVELING` define to `Conditionals.h`	2015-07-19 11:24:23 -07:00
Richard Wackerbarth	54ddc1d417	Simplify DRY RUN (PR#2358) Elsewhere DRYRUN turns off the heating elements and ignores constraints on them. Here, whenever motion is entered into the planner, if DRY RUN is set, we instantly act as if the E_AXIS is in the desired final position.	2015-07-19 10:15:53 -05:00
Scott Lahteine	944090c19c	Optimize lsDive logic	2015-07-19 10:13:40 -05:00
Scott Lahteine	417706e578	Include space for the terminating nul in lsDive	2015-07-19 10:13:39 -05:00
Scott Lahteine	f3c1a6b19c	Reduce lsDive stack usage to the minimum	2015-07-19 10:13:39 -05:00
Patrick Bogen	fba4e6241b	Specify print format for reporting invalid tmp_extruder (PR#2465)	2015-07-18 16:40:01 -05:00
AnHardt	d15d869267	Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464) to make clear - it's not a question but an order.	2015-07-18 10:27:21 -05:00
Scott Lahteine	f209b755a5	Move the Z probe as far as needed to trigger the switch (PR#2461)	2015-07-16 20:02:44 -05:00
Scott Lahteine	0f1df62389	Fixup comments in code_seen	2015-07-16 16:40:52 -05:00
Scott Lahteine	2945eb6650	Call code_seen only once per parameter	2015-07-16 16:40:52 -05:00
Scott Lahteine	b742af2e2a	Move Y_STOP_PIN for Printrboard with SD (PR#2420)	2015-07-16 16:39:55 -05:00
Scott Lahteine	baa9199973	Define extern delta only for delta	2015-07-16 16:36:30 -05:00
Scott Lahteine	77e80ef367	Require extruders for thermal code	2015-07-16 16:36:30 -05:00
Scott Lahteine	3bde4f4855	Require temp sensor for bed thermal protection	2015-07-16 16:36:30 -05:00
Scott Lahteine	82a3ed2f9a	Cleanup and dev notes in Marlin.h	2015-07-16 16:36:30 -05:00
Scott Lahteine	db23b9b184	Minor tweak to M204 code (PR#2457)	2015-07-16 16:35:13 -05:00
Scott Lahteine	81d42406b7	Move braces in homeaxis to prevent a hanging else (PR#2451)	2015-07-16 10:25:54 -05:00
Scott Lahteine	552a327df8	Fix lsDive filename stack overrun (PR#2449)	2015-07-16 10:23:56 -05:00
AnHardt	a6628f12cc	Eliminate the further use of the pin-parameter	2015-07-15 20:50:58 -05:00
AnHardt	8504992e9f	Remove the additional pin variable in Servo.cpp as sugested by @c-born inhttps://github.com/MarlinFirmware/Marlin/issues/1885#issuecomment-92618240	2015-07-15 20:50:58 -05:00
AnHardt	ed6598adf5	Corrected Bed Height vs. Bed Topology for verbosity > 3 and cleaned out some tabs. Everything else is a rebased PR#2017 as proposed by @CptanPanic	2015-07-15 19:51:40 -05:00
brian	62302ceb9e	Add calculation of difference between auto-correct bed level plane, and measured topo map.	2015-07-15 19:51:40 -05:00
Scott Lahteine	de25a48dec	Remove PID examples from preconfigured configs	2015-07-15 19:13:53 -05:00
Scott Lahteine	7456710a1f	Update configs formatting	2015-07-15 19:13:47 -05:00
Scott Lahteine	391386dd94	Update configs for new servo deactivation	2015-07-15 19:13:40 -05:00
AnHardt	5243d8b523	Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default	2015-07-15 17:39:43 -05:00
AnHardt	49609f6c14	Activate the new servo.move() function by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp and removing the old configuration in the ABL part of Configuration.h	2015-07-15 17:39:43 -05:00
AnHardt	40b6edcad7	Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY. But it will work on all servo moves, not only the probe servo moves.	2015-07-15 17:39:43 -05:00
AnHardt	2ddb2a2be9	Add Servo::move() to servo.cpp move(pin, angel) - Sequence of attach(pin), write(angel), if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches. As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour, the usual sequence to handle a servo movement is: attach(pin) write(angel) delay(until the servo finished the move) detache() Here a function to handle the complete sequence.	2015-07-15 17:39:43 -05:00
mkile	8a01e5fb7a	Update Russian translation (PR#2443) Slightly updated translation.	2015-07-15 10:35:36 -05:00
Richard Wackerbarth	e83575537a	Compiler defines USBCON for USB devices (PR#2433)	2015-07-15 10:32:11 -05:00
ayberkozgur	7268d46508	Always calculate extruder temperature PID d term (PR#2432)	2015-07-13 13:22:26 -05:00
Scott Lahteine	87a872e103	Use st_get_position_mm where possible (PR#2411)	2015-07-12 22:15:54 -05:00
Scott Lahteine	2e0da8abdc	Allow N to take a negative argument (PR@2402)	2015-07-12 22:14:25 -05:00
Scott Lahteine	447dbd6fa5	Add STEPPER_RESET_PIN support	2015-07-11 16:04:11 -05:00
Scott Lahteine	a0351bdb73	Remove STEPPER_RESET_FIX option	2015-07-11 16:04:11 -05:00
Scott Lahteine	6b1b8cb2b3	Also nullify spaces before the checksum asterisk (PR#2409)	2015-07-10 09:03:07 -05:00
Scott Lahteine	8e61314323	Use RIGIDBOT_PANEL for consistency with online docs	2015-07-09 11:36:46 -05:00
Scott Lahteine	4b204da3c1	Cleanup of pins_RAMPS_13.h	2015-07-09 11:36:46 -05:00
Scott Lahteine	536f86e896	RigidBot CONTROLLERFAN_PIN in Configuration_adv.h	2015-07-09 11:36:46 -05:00
Scott Lahteine	f068e46661	RigidBoard include for pins.h	2015-07-09 11:36:46 -05:00
Scott Lahteine	9ebcae496d	RIGIDBOARD / RIGIDPANEL	2015-07-09 11:36:46 -05:00
Scott Lahteine	c3c605c658	Move note about LiquidTWI2 to Configuration.h (PR#2406)	2015-07-09 05:33:17 -05:00
Scott Lahteine	4e9d658141	Prevent a hanging SERIAL_ECHO_START in M111	2015-07-07 06:59:10 -05:00
Scott Lahteine	bc0fdbe88e	Use SERIAL_EOL in SERIAL_PROTOCOLLN macros	2015-07-07 06:59:10 -05:00
Scott Lahteine	d78ebbc0e9	Remove unused MSG_OK_B and MSG_OK_T	2015-07-07 06:59:10 -05:00
Scott Lahteine	6b494c1535	Use disable_all_heaters in M111	2015-07-07 06:59:10 -05:00
Scott Lahteine	15190d40df	Add extra EOL after M111	2015-07-07 06:59:10 -05:00
AnHardt	0e1cf78f5c	Remove code for testing if probing range is too small (PR#2390) becaue it is over-restrictive and superseeded by the now working tests if the probe-recktangle can be reached. See iss#2366	2015-07-07 06:58:01 -05:00
AnHardt	d421f5250d	Correct the sign of zprobe_zoffset for G29 (PR#@391) Sign flipped with #2167. See also comments https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355 and following.	2015-07-07 06:55:33 -05:00
Scott Lahteine	52fcc743ab	Replace "target" with "destination" in M600 (PR#2374) - Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being used as the index into the `destination[AxisEnum]` array.	2015-07-04 05:55:25 -05:00
Scott Lahteine	a5033c3652	Enable LCD_PIN_RESET if it exists (PR#2375)	2015-07-04 05:53:22 -05:00
AnHardt	23c8c5348f	Z-height fix V2b (PR#2351) here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are replaced with `zprobe_zoffset`.	2015-07-02 20:30:40 -05:00
Todd Swindoll	a111fbbd0a	z-probe offset fix (PR#2361) verified via 1.0.2 tag that compiles by multiple people, credit for the fix goes to paulusjacobus for the initial find and sniffle for the correction so M851 works.	2015-07-02 20:28:07 -05:00
Scott Lahteine	42465ee444	Cleanup of comments & spacing	2015-06-28 08:20:28 -05:00
Scott Lahteine	9682ed455e	Fix comment on M83, add comment to prepare_move	2015-06-28 08:20:19 -05:00
Scott Lahteine	bb44fe17cf	Fix typo in buzzer.h endif (PR#2337)	2015-06-27 06:10:19 -05:00
AnHardt	36746143a1	Correct output of M48 (PR#2336) n_samples is an uint8_t . Got printouts like: 50 of 2 ...	2015-06-27 06:08:40 -05:00
Scott Lahteine	f6ca5a8da8	Allow "M110 N123" without a checksum	2015-06-26 18:13:54 -05:00
Scott Lahteine	aaad65ff5d	Include a comment documenting M110	2015-06-26 18:13:54 -05:00
Scott Lahteine	862c72b030	Put the mandatory test of gcode_N first	2015-06-26 18:13:54 -05:00
Scott Lahteine	30976f9773	Allow M110 to handle a second N argument	2015-06-26 18:13:53 -05:00
Scott Lahteine	d135b15bb8	Init all endstop bits to 0 (PR#2332)	2015-06-26 07:10:22 -05:00
Scott Lahteine	5ccb1c9e7d	Use millis for M600 audio feedback interval	2015-06-25 20:45:03 -05:00
Scott Lahteine	fb16a83b8a	Cleanup M600 documentation comments	2015-06-25 20:45:03 -05:00
Scott Lahteine	97ec224d72	Replace target with destination in M600	2015-06-25 20:45:03 -05:00
Scott Lahteine	4ce9ddbb74	Check the temperature before filament change	2015-06-25 20:45:03 -05:00
Jaime van Kessel	b8b5762e55	Update Ultimaker URL	2015-06-25 09:12:44 -05:00
Jaime van Kessel	d5bfbf5a59	Added correct dutch translation for calibrate.	2015-06-25 09:12:44 -05:00
Scott Lahteine	149c474e55	Updated Russian language (PR#2325) Gleaned from https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664 8976eafd1ae220ae	2015-06-22 23:07:19 -04:00
AnHardt	722829b058	Move buzzing code to buzzr.h & buzzer.cpp (PR#2307) at least the lcd independent part from Marlin_main.cpp.	2015-06-22 22:31:48 -04:00
AnHardt	c461975140	Rename and repair MELZI_1284 (PR#2301) to MELZI_MAKR3D. Fix for #2288 As the normal MELZI also can have a 1284.	2015-06-22 22:30:07 -04:00
schlotzz	1e9cf905c7	Enable ZigZag AutoBedLeveling on Deltas (PR#2273) ZigZag has been disabled by fault due to do_topography_map	2015-06-15 20:26:25 -05:00
Scott Lahteine	ec93383ec8	Add SanityCheck for bed probe position settings (PR#2282)	2015-06-15 20:22:44 -05:00
Scott Lahteine	dc40a5f6e0	Patch up more outdated config lines	2015-06-15 20:20:32 -05:00
Scott Lahteine	98c9111a7d	Update delta configs with latest settings	2015-06-15 20:20:32 -05:00
Scott Lahteine	e6baf8afd9	Fix up allen key settings in delta configs	2015-06-15 20:20:31 -05:00
Scott Lahteine	3b293fc5d1	Move Delta settings lower in delta files	2015-06-15 20:20:31 -05:00
Scott Lahteine	df21857583	Move extruder offset settings next to extruders setting	2015-06-15 20:20:31 -05:00
Scott Lahteine	2dd1859247	Cleanup spaces and comments in configs and conditionals	2015-06-15 20:20:31 -05:00
Scott Lahteine	a274769f4f	Clean up spacing and comments Also clean up some trailing spaces in a few other sources	2015-06-15 20:20:31 -05:00
Scott Lahteine	d3bce05d54	Fix up spacing for filament sensor values	2015-06-15 20:20:31 -05:00
Scott Lahteine	b4b10a57fe	Fix configurator section directives and values lists	2015-06-15 20:20:31 -05:00
Scott Lahteine	bba14dcbe6	Move Z Safe Homing point to the middle of the movement range	2015-06-15 20:20:31 -05:00
Scott Lahteine	318318b02f	Add pins_RAMPS_13_EFB.h to reduce redundancy	2015-06-15 20:17:09 -05:00
Scott Lahteine	346c8b339b	Remove a test from pins_RAMPS_13.h - Add 3 new lines to `pins.h` to remove 2 redundant tests in `pins_RAMPS_13.h`	2015-06-15 20:15:38 -05:00
AnHardt	b93cddfcc9	Add lost MKS_BASE to pins.h (PR#2297)	2015-06-15 10:23:46 -05:00
AnHardt	6ab7b560af	Rework buzzing (PR#2296) by: Moving HAS_LCD_BUZZ macro to Coditionals.h Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd. Removing the ULTRALCD condition. Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd. All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER. To do: Check the conditions for the BEEPER-pin in all pin-files.	2015-06-15 06:13:26 -05:00
Scott Lahteine	29122db2fa	Fix ULTRA_LCD spelling in HAS_LCD_BUZZ	2015-06-15 06:12:34 -05:00
Scott Lahteine	1d94d098bf	Formatting tweaks as part of fixing issue 1497	2015-06-14 19:57:27 -05:00
Scott Lahteine	e602c28ad9	Set auto fan pins to OUTPUT during init Fixes the problem of these pins being left in INPUT state, as described in #1497	2015-06-14 19:57:27 -05:00
Scott Lahteine	90f858aa85	Use translated strings for axis movement (PR#2280) Suggest we use the translated strings here. They use (except for German) the phrasing “Move X” instead of just the axis letter, but they should fit the available space. The “Extruder” string would be the same, except it will be translated.	2015-06-14 08:16:00 -05:00
Scott Lahteine	e2a4a83586	Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281 )	2015-06-12 22:39:35 -05:00
Scott Lahteine	6b1b3adaf0	Consistent punctuation in SanityCheck errors (PR#2283)	2015-06-12 09:31:02 -05:00
MagoKimbra	eb81982fcd	Fix error next command in autotune (PR#2274) Now send only temperature for T or B, but not send OK. Host interprets the line to show the right temperature, but not in response to M105 then stop and send commands until it ends the autotune.	2015-06-12 07:10:38 -05:00
AnHardt	55b23c896a	Optimise out_of_range_error() (PR#2265) by avoiding the strncopy()	2015-06-12 02:20:40 -05:00
filipmu	b0860adab6	Fix volumetric multiplier display for filament sensor (PR#2264) The volumetric multiplier display needs to be multiplied by 100 in order to make it an integer for display purposes.	2015-06-12 02:19:27 -05:00
AnHardt	45642b7fe8	Respect DISABLE_AXIS settings (PR#2216) when DEFAULT_STEPPER_DEACTIVE_TIME is over instead of simply turn off all.	2015-06-11 11:35:05 -05:00
wurstnase	c85a486445	make the dual z-endstop optional (PR#2277) it's disabled by default	2015-06-10 15:45:59 -05:00
Scott Lahteine	962b107341	Prevent current_command_args from bypassing nul (PR#2270)	2015-06-09 16:07:10 -05:00
Richard Wackerbarth	06ae832276	Deprecate Support for Arduino IDE < 1.0.5 Note that newer versions of the IDE can still be made to support compilation for the older boards.	2015-06-08 17:15:28 -05:00
Scott Lahteine	ff6081be3a	Parse N[0-9]+[ ]* differently (PR #2263 ) More general solution to skip N[0-9]+[ ]* in the parser as in #2218	2015-06-08 17:06:49 -05:00
Scott Lahteine	aad121864e	Include "Z" in M851 report	2015-06-08 05:09:27 -05:00
Scott Lahteine	96a3fba8ac	Reverse the sign of zprobe_zoffset - When editing on the LCD, minus now means below the nozzle - Stores the opposite sign in EEPROM, so bumped to “V20”	2015-06-08 05:09:27 -05:00
fmalpartida	f92907183c	Updated SAV MkI pin header.	2015-06-08 05:07:11 -05:00
Richard Wackerbarth	58941e543e	ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed #defining something just to define something else doesn’t make sense If you want SDCARDDETECTINVERTED, just define it yourself. If the previous code was intended to define, undefined and then again define the term, that code is improper.	2015-06-06 21:44:59 -05:00
CONSULitAS	788eb6e647	planner.cpp: remove tab planner.cpp: single evil and hidden tab removed ♻️ 😏	2015-06-06 20:13:56 -05:00
CONSULitAS	3a5963c0e7	Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue … * all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping issue * for K8200: uncommented with tested (and working) values	2015-06-06 20:13:56 -05:00
CONSULitAS	e55e65d1e4	planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue … @CONSULitAS planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue (V2.1 with macro and linear scaling) @thinkyhead thanks for idea on linear scaling	2015-06-06 20:13:56 -05:00
paclema	8d295547be	* Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button.	2015-06-06 19:45:45 -05:00
atfield90	6d0e91328d	Renamed Board_megatronics_1 to Board_minitronics	2015-06-06 18:59:04 -05:00
atfield90	c4a2e5ac23	Renamed Pins_megatronics_1 to Pins_minitronics	2015-06-06 18:59:04 -05:00
atfield90	2076906aaa	Renamed Pins_megatronics_1 to Pins_minitronics	2015-06-06 18:59:04 -05:00
tonokip	10733a2bb0	added minirambo pin definitions. V2	2015-06-06 18:37:58 -05:00
Richard Wackerbarth	303d47228e	Define Probe Path in new format	2015-06-06 17:48:27 -05:00
Richard Wackerbarth	ad09d6a60f	3 Step Allen Key Probe	2015-06-06 17:48:27 -05:00
Richard Wackerbarth	8359cdf01d	Check compatibility for Teensy-based processor The instruction say to set a #define in fastio.h However, that value is not included before this test.	2015-06-06 17:24:34 -05:00
Ed Boston	08968c29bb	Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples	2015-06-06 16:40:32 -05:00
Ed Boston	fed18bcc20	Removed SDSLOW for ELB_FULL_GRAPHIC_CONTROLLER Hardware changes has removed the need for this option.	2015-06-06 16:40:32 -05:00
Ed Boston	b94a0e1501	Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED The new define allows the sd card detect to be inverted or not from Configuration.h	2015-06-06 16:40:31 -05:00
Ed Boston	bc205c76a3	SDCARDDETECTINVERTED problems Fixed an error where SDCARDDETECTINVERTED was being defined/undefined improperly	2015-06-06 16:40:31 -05:00
AnHardt	e400fce271	Merge pull request #2221 from MagoKimbra/Dryrun Insert Debug DRYRUN Repetier Host compatible	2015-06-03 12:30:48 +02:00
AnHardt	163a9ff58e	Merge pull request #2230 from AnHardt/psm Fix thermal protection state machine target temp. V2	2015-06-03 09:46:53 +02:00
AnHardt	c3fe6e61ae	Merge pull request #2229 from AnHardt/position-out-of-range Fix out_of_range_error()	2015-06-03 09:46:22 +02:00
MagoKimbra	4db8d2def4	Moved MSG_DEBUG in language.h	2015-06-03 08:18:27 +02:00
AnHardt	b7e9ba7591	Back to 1.0.3 dev - for now	2015-06-03 00:47:11 +02:00
AnHardt	d1f4471000	Merge pull request #2146 from Wackerbarth/Versioning Versioning	2015-06-02 18:31:21 +02:00
AnHardt	b1404a0743	fix thermal protection state machine target temp. V2 If the target temperature is changed then it would always stay in the reset state. Thanks to @tonokip. Replaces #2119	2015-06-02 12:26:21 +02:00
AnHardt	17b0ec84ed	Fix out_of_range_error() For sprintf_P() the first parameter has to be a `char` not `const char`.	2015-06-02 11:50:32 +02:00
AnHardt	35af5ef23e	Merge pull request #2225 from Wurstnase/naming consistency name for multiplier	2015-06-02 10:18:22 +02:00
wurstnase	e7e964432b	consistency name for multiplier replace extruder_multiply with extruder_multiplier like feedrate_multiplier or volumetric_multiplier	2015-06-01 22:33:22 +02:00
AnHardt	d4c6fc5d0a	Merge pull request #2223 from AnHardt/dualz-semicolon Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.	2015-06-01 20:15:55 +02:00
AnHardt	0d9d21d15f	Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.	2015-06-01 19:51:43 +02:00
MagoKimbra	76306f9073	Insert Debug DRYRUN Repetier Host compatible	2015-06-01 18:34:45 +02:00
MagoKimbra	881146bc22	Fix problem Width Cura	2015-06-01 17:25:32 +02:00
fmalpartida	11e3f3375d	Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing Updated LCD wiki location.	2015-05-31 21:20:26 +02:00
Alexey Shvetsov	a8670b66a7	Update ru translation Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2015-05-31 20:09:10 +03:00
fmalpartida	93da52d011	Added support for OLED SSD1306 I2C based LCDs.	2015-05-31 18:53:29 +02:00
Wurstnase	9c09967803	Merge pull request #2149 from Wurstnase/enstop_bits faster compare	2015-05-31 16:02:55 +03:00
wurstnase	0f3f7d6835	clean up double endstops	2015-05-31 14:06:13 +02:00
AnHardt	9d2a980bcf	Merge pull request #2170 from thinkyhead/beep_M600_elsewise Slight size reduction by adding idle()	2015-05-30 12:42:32 +02:00
AnHardt	2728dc0606	Merge pull request #2194 from thinkyhead/reduce_strings Redo "invalid extruder" to save 304 bytes	2015-05-30 11:05:08 +02:00
Scott Lahteine	be5236e839	Reduce setTargetedHotend by removing the switch	2015-05-29 18:03:58 -07:00
Scott Lahteine	06f401e7e5	Redo "invalid extruder" to save 264 bytes - Use `setTargetedHotend` in `M200`, as with other commands that use `T` for the extruder - Synthesize the "invalid extruder" message, obviating several long strings	2015-05-28 22:25:28 -07:00
Scott Lahteine	1a882bcc2e	Merge pull request #2193 from thinkyhead/ignore_unrecognized_commands Ignore unknown commands if they start with G, M, or T	2015-05-28 22:03:48 -07:00
Scott Lahteine	a672872717	Merge pull request #2187 from AnHardt/MAX6675M105 Print active extruder with M105 for MAX6675	2015-05-28 18:12:48 -07:00
Scott Lahteine	9beed830eb	Drop commented code_is_good lines	2015-05-28 17:53:47 -07:00
Scott Lahteine	068d4a1eb2	Ignore unknown commands if they start with G, M, or T	2015-05-28 17:44:09 -07:00
Scott Lahteine	5824f613ff	Merge pull request #2185 from jothan/bed_integral Separate the maximum integral power for the bed from PID_INTEGRAL_DRI…	2015-05-28 16:32:02 -07:00
Scott Lahteine	c5c9d12630	Merge pull request #2183 from AnHardt/displayinit Initialize the display earlier	2015-05-28 16:29:18 -07:00
Scott Lahteine	ef4becc413	Merge pull request #2188 from AnHardt/FtoN Replace MSG_F? with MSG_N?	2015-05-28 16:18:50 -07:00
Scott Lahteine	0564625757	Update M33 for new gcode parser	2015-05-28 14:17:39 -07:00
AnHardt	f18f689c01	Replace MSG_F? with MSG_N? To avoid double definitions. I prefer to read N for Number not for Nozzle.	2015-05-28 20:30:23 +02:00
AnHardt	af7e3f5076	Print active extruder with M105 for MAX6675 Was omitted when T0 is a MAX6675.	2015-05-28 19:03:16 +02:00
Jonathan Bastien-Filiatrault	d46d9d998e	Add maximum bed integral term in example configurations.	2015-05-28 12:51:37 -04:00
Jonathan Bastien-Filiatrault	e86f2342c0	Separate the maximum integral power for the bed from PID_INTEGRAL_DRIVE_MAX / PID_MAX. My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed to reach its intended temperature. The head requires a low maximum power since I run on 24 volts and it has a somewhat low thermal mass.	2015-05-28 11:48:04 -04:00
AnHardt	f0523b5816	Initialize the display earlier to have it ready to display errors during (temperature)-setup.	2015-05-28 16:08:17 +02:00
Scott Lahteine	790c697c19	Fix DEGREES macro	2015-05-28 00:19:48 -07:00
Scott Lahteine	76b4678f99	Merge pull request #2171 from thinkyhead/gcode_110_is_good M110 is a known command	2015-05-26 21:17:58 -07:00
Scott Lahteine	03d5709b09	M110 is a known command - The command parser now displays “unknown command” in more cases. Known commands must be added to the `switch` inside `process_commands` to suppress the error.	2015-05-26 20:31:18 -07:00
Scott Lahteine	d76a01194d	Slight size reduction by adding idle()	2015-05-26 20:08:21 -07:00
Richard Wackerbarth	2deb5a8ac5	Temporary Hack REVERT THIS CHANGE In proper use, we want to force the vendor to update this file to reflect distribution parameters However, until most users have converted to automatic versioning, we “grant them a pass”	2015-05-25 15:54:08 -05:00
Richard Wackerbarth	b5743d6927	Use SOURCE_CODE_URL rather than FIRMWARE_URL	2015-05-25 15:53:34 -05:00
Richard Wackerbarth	5ea139fd79	Revised Versioning mechanism	2015-05-25 15:53:14 -05:00
AnHardt	da246f5cb1	Activate BED_MINTEMP error. And call _temp_error() directly for ERR_MAXTEMP_BED to avoid the only one time use of bed_max_temp_error(). Includes #2156.	2015-05-25 13:23:19 +02:00
AnHardt	959da98d8e	Call kill() only once when triggered by a temperature error to avoid stack overflow when called from interrupt. Some clean up for calls of disable_all_heaters(). 'disable_all_heaters()' is called in kill() and again when 'killed' is already set inside _temp_error().	2015-05-25 12:44:03 +02:00
Scott Lahteine	68f6f149d0	Reduce code size with out_of_range_error function - Affects code size when automatic bed leveling is enabled	2015-05-24 20:18:02 -07:00
wurstnase	94120740d8	faster compare !(~(ab)&0x3) and ab == 0x3 are equal	2015-05-23 07:55:15 +02:00
Scott Lahteine	c9141e604a	Merge pull request #2145 from thinkyhead/gcode_folding Indentation in process_commands	2015-05-22 18:47:37 -07:00
Scott Lahteine	b55f8718c3	Indent G90/G91, G92	2015-05-22 17:34:08 -07:00
Scott Lahteine	b0d520b109	Indent G30, G31/G32	2015-05-22 17:33:17 -07:00
Scott Lahteine	ffe27a6225	Indent G29	2015-05-22 17:32:46 -07:00
Scott Lahteine	86083badc2	Indent G4, G10/G11, G28	2015-05-22 17:32:27 -07:00
Scott Lahteine	47d7a9cb5e	Indent G2/G3	2015-05-22 17:31:38 -07:00
Scott Lahteine	350f239d84	Indent G0/G1	2015-05-22 17:31:24 -07:00
Scott Lahteine	672b0c1fd3	Cleanup pins in RAMPS_13_EFB boards	2015-05-22 16:20:54 -07:00
Scott Lahteine	15a2351675	No need for +1 on initial seen_pointer	2015-05-22 15:31:30 -07:00
Scott Lahteine	550dd87b2a	Set seen_pointer before calling code_value	2015-05-22 15:11:48 -07:00
Scott Lahteine	38cc0b93c6	Merge pull request #1874 from AnHardt/Bulgarian Introduction of Bulgarian - language_bg.h	2015-05-22 13:59:50 -07:00
Scott Lahteine	04a1622172	Merge pull request #2127 from Wackerbarth/Kossel_Pro Kossel Pro	2015-05-21 18:43:26 -07:00
Scott Lahteine	81c2ca3e10	Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb Witbox and Hephestos are RAMPS EFB	2015-05-21 18:39:02 -07:00
Scott Lahteine	f919a2fed1	Merge pull request #2134 from AnHardt/preheat-all Shift call of start_watching_heater() into setTargetHotend()	2015-05-21 18:36:28 -07:00
Scott Lahteine	063881b5bd	Fix a couple of doubled semicolons	2015-05-21 18:15:29 -07:00
AnHardt	94dff5b36a	Merge pull request #2137 from thinkyhead/tweak_swh Move millis call in start_watching_heater	2015-05-22 02:02:07 +02:00
Scott Lahteine	70d2f48d4e	Merge pull request #2136 from thinkyhead/M303_suppress_error Suppress the line mismatch error after M303	2015-05-21 16:46:30 -07:00
AnHardt	0c0ace2a04	Remove start_watching_heater() fom M104 and M109	2015-05-22 01:44:50 +02:00
Scott Lahteine	00716d0ca0	Small start_watching_heater adjustment	2015-05-21 16:44:49 -07:00
Scott Lahteine	834747deb7	Merge pull request #2135 from Wurstnase/new_endstop_bits new endstop bits	2015-05-21 16:35:54 -07:00
Scott Lahteine	bde9c70d42	Suppress the line mismatch error after M303	2015-05-21 16:27:22 -07:00
Scott Lahteine	50bd7493cc	Merge pull request #2108 from thinkyhead/m33_long_filename_host_support M33 LONG_FILENAME_HOST_SUPPORT	2015-05-21 16:22:47 -07:00
Scott Lahteine	4d11b29959	Merge pull request #2113 from thinkyhead/command_sanitizer Command sanitizer	2015-05-21 16:21:58 -07:00
wurstnase	ff98b8632b	new endstop bits	2015-05-21 23:16:43 +02:00
AnHardt	9b0fa9c309	Changed dependency of start_watching_heater() in setTargetHotend() to THERMAL_PROTECTION_HOTENDS	2015-05-21 21:07:37 +02:00
AnHardt	bc0764894a	Shift call of start_watching_heater() into setTargetHotend() to warrant watching is set or reset. Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED. Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.	2015-05-21 20:36:11 +02:00
Richard Wackerbarth	b878bc5620	Introducing the Kossel Pro Build Configuration	2015-05-21 11:47:34 -05:00
Richard Wackerbarth	1d8f61ca8a	AT90USB is defined in pins.h	2015-05-21 11:46:54 -05:00
Richard Wackerbarth	735bf2d35f	Describe Custom M Code	2015-05-21 08:06:33 -05:00
Scott Lahteine	f39658c822	M120 and M121 are reversed	2015-05-21 00:17:44 -07:00
Scott Lahteine	6eb4f90ce7	Also synchronize configurator copies of configs	2015-05-20 21:34:00 -07:00
Scott Lahteine	9d1961ebe3	Witbox and Hephestos are just RAMPS_13_EFB	2015-05-20 21:33:23 -07:00
AnHardt	4422365a53	Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into _temp_error	2015-05-20 23:34:39 +02:00
AnHardt	4113762062	Merge pull request #2130 from AnHardt/kill2 Add a string parameter to kill()	2015-05-20 23:32:51 +02:00
AnHardt	89d2ee6f13	Make output on display dependant of ULTRA_LCD	2015-05-20 22:03:16 +02:00
AnHardt	120d4c7a8c	Merge remote-tracking branch 'origin/kill2' into _temp_error	2015-05-20 21:25:32 +02:00
AnHardt	cb6e82dc60	Change from kill() to kill(const char *) in temperature.cpp	2015-05-20 21:22:48 +02:00
AnHardt	9d13942278	Use new kill() with parameter.	2015-05-20 21:18:52 +02:00
AnHardt	6398c5e28d	Merge remote-tracking branch 'origin/kill2' into _temp_error	2015-05-20 21:08:19 +02:00
AnHardt	f4a93ed997	Add a string parameter to kill() Makes the output on the LCD adjustable.	2015-05-20 20:53:48 +02:00
AnHardt	2990c6c45f	Use new kill_() for _temp_error() instead of stop(). We really want to require a reset and no chance to set a new temperature.	2015-05-20 14:03:14 +02:00
AnHardt	9b8c6ed254	Merge pull request #2120 from chris-bo/dogm_config move dogm font selection to configuration_adv.h	2015-05-20 10:11:34 +02:00
AnHardt	06513565e9	Merge pull request #2105 from eboston/Development Add ELB_FULL_GRAPHIC_CONTROLLER with ADAFRUIT_ST7565 display.	2015-05-20 09:56:21 +02:00
Ed Boston	082ed3beed	Propagate Configuration.h changes Updated all the example Configuration.h files for the new display type.	2015-05-19 14:04:57 -07:00
Ed Boston	152b681bb5	Added link to controller github Added the link to the github information about the ELB_FULL_GRAPHIC_CONTROLLER	2015-05-19 04:14:55 -07:00
AnHardt	995b84944b	Merge pull request #1982 from CONSULitAS/Development_Update_language.h language.h: update documentation / URL für K8200	2015-05-19 12:13:35 +02:00
Scott Lahteine	7bc5fd8193	Merge pull request #2123 from AnHardt/Duemilanove Remove Duemilanove	2015-05-18 20:36:05 -07:00
Scott Lahteine	94de1e0d93	Merge pull request #2116 from AnHardt/wording transpire -> expire	2015-05-18 20:34:46 -07:00
AnHardt	4d4fa3607b	Remove Duemilanove No way to fit Marlin into 32K.	2015-05-19 02:46:37 +02:00
AnHardt	e353d27430	Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian	2015-05-18 23:56:53 +02:00
Ed Boston	ca8d1756d5	Define fixes Fixed a couple defines that were not changed or commented out.	2015-05-18 14:23:31 -07:00
CONSULitAS	b96b28b7cc	language.h: update documentation for LANGUAGE_INCLUDE language.h: update documentation for LANGUAGE_INCLUDE @thinkyhead What do you think? I think there should be a warning like this.	2015-05-18 23:11:26 +02:00
Christian Bohn	258bcdefe0	move dogm font selection to configuration_adv.h	2015-05-18 22:54:53 +02:00
AnHardt	7750180c93	transpire -> expire Minor wording correction.	2015-05-18 21:48:10 +02:00
AnHardt	70163dafb9	Use _temp_error() for all errors thrown by different mechanisms Now ending in an endless loop. Tidy up the output format. We now get: ERRORTEXT ", system stopped! Heater_ID: " HEATERID Where ERRORTEXT can be: "Heating failed" "Thermal Runaway" "MAXTEMP triggered" "MINTEMP triggered" and soon "Thermal Jump" HEATERID can be 0, 1, 2 ,3 , "bed" This messages are always followed by the common: "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"	2015-05-18 20:26:25 +02:00
Scott Lahteine	a0f362c735	Simplify & optimize with current_command_args	2015-05-18 07:08:04 -07:00
Scott Lahteine	adc8fcb77f	More parser comments, optimize code_seen, save with goto	2015-05-18 07:08:04 -07:00
Scott Lahteine	c6d8dd19d9	use fetched value	2015-05-18 07:08:04 -07:00
Scott Lahteine	1116e13f5a	Further optimization of command parser	2015-05-18 07:08:03 -07:00
Scott Lahteine	3a4c3ab76e	Pre-sanitize the command before handling - Use a global pointer for the current sanitized command - Pre-sanitize the current command to bypass `N` and nullify `*`, removing the need for handlers to bypass, ignore, or nullify these parts, and reducing overhead for `code_seen`, etc. - Pre-skip leading whitespace. - Only look for G, M, T codes at the start of the command. - Verify that G, M, T codes are followed by command codes.	2015-05-18 07:06:51 -07:00
Ed Boston	a83bf18ee1	More functional seperation Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h. Added U8GLIB_LM6059_AF to define display specific actions. Added reminder to compile in u8glib	2015-05-18 05:37:46 -07:00
AnHardt	97ca1b3f4d	Name magic value 20 to MAX_OVERSHOOT_PID_AUTOTUNE to make it better findable.	2015-05-18 14:15:29 +02:00
Scott Lahteine	0f2c9bacfd	M33 LONG_FILENAME_HOST_SUPPORT	2015-05-17 17:36:32 -07:00
Scott Lahteine	3feaef6526	Have G92 set the nozzle position on Delta and SCARA	2015-05-17 17:08:05 -07:00
Ed Boston	047e688e93	Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER Rename of define to avoid confusion between the controller and the display which had similar names.	2015-05-17 15:23:17 -07:00
Ed Boston	1999ac415c	Formatting Changes Fixes for some code formatting changes and commenting out the ADAFRUIT_ST7565 define that was left defined.	2015-05-17 13:39:24 -07:00
Ed Boston	41f8cdb3a6	ADAFRUIT_ST7565 Added support for new display type	2015-05-17 12:47:41 -07:00
wurstnase	21ff773832	rework out_bits	2015-05-17 14:33:09 +02:00
Scott Lahteine	6c27eaf864	Merge pull request #2101 from thinkyhead/code_style Code style and a dangling "else"	2015-05-17 03:39:08 -07:00
Scott Lahteine	d580a0d186	Use "+=" in plane rotation	2015-05-17 01:51:14 -07:00
Scott Lahteine	2f3a410cb0	Fix a potential hanging "else" bug	2015-05-17 01:50:30 -07:00
Scott Lahteine	b83e3f0905	Combine "Bed X: " strings	2015-05-17 01:49:52 -07:00
Scott Lahteine	7dfb8becdb	Adjust some names and types in Marlin_main.cpp	2015-05-17 01:48:51 -07:00
Scott Lahteine	c966aa26ff	Comments in Marlin_main.cpp	2015-05-17 01:47:53 -07:00
Scott Lahteine	c54a2ea042	Adjust spacing in Marlin_main.cpp and stepper.*	2015-05-17 01:47:02 -07:00
Scott Lahteine	072625ccad	Update headings in Marlin_main.cpp and stepper.cpp	2015-05-17 01:44:53 -07:00
Scott Lahteine	16032f149f	Rename to codenum as a consistency	2015-05-16 23:17:35 -07:00
Scott Lahteine	273a4a253f	Merge pull request #2096 from thinkyhead/cherry_picking3 Hide M117 with no LCD	2015-05-16 21:10:28 -07:00
Scott Lahteine	64825a3d1e	Merge pull request #2095 from thinkyhead/cherry_picking2 Add gcode_line_error to reduce code size	2015-05-16 21:09:15 -07:00
Scott Lahteine	ca79282eaf	Hide M117 with no LCD	2015-05-16 20:59:04 -07:00
Scott Lahteine	ce218cafdb	Add gcode_line_error to reduce code size	2015-05-16 20:54:58 -07:00
Scott Lahteine	46d59784ad	Rename preocess_command to process_next_command	2015-05-16 20:47:40 -07:00
Scott Lahteine	513077c317	Minor change to fan kick	2015-05-16 19:42:28 -07:00
Scott Lahteine	76438195f0	NO_TIMEOUTS and ADVANCED_OK off by default	2015-05-16 02:47:20 -07:00
Scott Lahteine	d2563804c8	Add LF to file errors	2015-05-15 04:37:22 -07:00
Scott Lahteine	e114662cfa	Adjust SdBaseFile spacing	2015-05-15 03:23:49 -07:00
Scott Lahteine	98e91f5253	Allow lsDive to recurse with minimal stack usage	2015-05-15 03:19:07 -07:00
Scott Lahteine	19166a92e4	Merge pull request #2057 from Wurstnase/serial_wait add plan buffer remaining for 'P' and block buffer remaining 'B'	2015-05-14 04:57:08 -07:00
Scott Lahteine	95f5a68006	Merge pull request #2074 from thinkyhead/lcd_xyz_unknown Display unknown XYZ on the LCD as "---"	2015-05-14 04:56:38 -07:00
Scott Lahteine	e97fcafd0e	Merge pull request #2076 from thinkyhead/mendel_inverting Use MSG_OK in M105	2015-05-14 04:54:11 -07:00
Scott Lahteine	0f6cd3640b	Drop extraneous ok_to_send	2015-05-14 04:38:09 -07:00
Scott Lahteine	0ce355d9e7	Use MSG_OK in M105	2015-05-14 03:33:38 -07:00
Scott Lahteine	a366e57385	Merge pull request #2075 from thinkyhead/mendel_inverting Use Mendel default for INVERT_Y_DIR	2015-05-14 03:29:24 -07:00
Scott Lahteine	7b3acfbb6f	Merge pull request #2072 from thinkyhead/better_arc_code Consolidate arc code, remove motion_control.*	2015-05-14 00:27:22 -07:00
Scott Lahteine	78beef2d73	Use Mendel default for INVERT_Y_DIR	2015-05-14 00:25:47 -07:00
Scott Lahteine	1a4a09c26f	Display unknown XYZ on the LCD as "---" - Also show 2 digits past decimal for Z on DOGM	2015-05-13 22:45:58 -07:00
Scott Lahteine	68ce419147	Note on segment size	2015-05-13 19:11:36 -07:00
Scott Lahteine	8b92249f18	Bring arc_offset into auto scope	2015-05-13 19:00:46 -07:00
Scott Lahteine	80807b2d71	Consolidate arc code, remove motion_control.*	2015-05-13 18:52:41 -07:00
Scott Lahteine	f65833931d	Formatting tweaks	2015-05-13 02:02:19 -07:00
Scott Lahteine	fcfd99c1ae	Add comments to lcd_control_temperature_menu	2015-05-12 18:46:16 -07:00
Scott Lahteine	d693e0f378	Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit	2015-05-12 18:30:38 -07:00
Scott Lahteine	6697a8f375	Watch the heater a little longer	2015-05-12 18:22:47 -07:00
Scott Lahteine	5693a6e3c9	Fix heating error message	2015-05-12 18:17:13 -07:00
Scott Lahteine	747fd5801c	Merge pull request #2055 from thinkyhead/thermal_unified Combine thermal runaway and watch-period	2015-05-12 08:04:29 -07:00
Scott Lahteine	6e5572228d	Merge pull request #2064 from thinkyhead/wait_before_g28 Split up prepare_move by type	2015-05-12 07:53:11 -07:00
Scott Lahteine	27ad381e25	Allow fractional seconds in G4 and M0	2015-05-12 07:52:08 -07:00
Scott Lahteine	5146694452	Merge pull request #1884 from shaggythesheep/feature_new_board_ramps_cnc_controller Feature: Add RAMPS CNC Controller Board	2015-05-12 04:31:49 -07:00
Scott Lahteine	b2bd9aae7c	SCARA_SEGMENTS_PER_SECOND	2015-05-12 04:18:15 -07:00
Scott Lahteine	bd20bd5444	Merge pull request #2063 from chris-bo/autobed_sled improve sled handling	2015-05-12 03:29:21 -07:00
Scott Lahteine	9e95ceb3fc	Split up prepare_move by type - For better encapsulation add inlines for each prepare_move type - Move controllerFan vars inside the function as statics - Some formatting cleanup - Rename `ClearToSend` as `ok_to_send`	2015-05-12 02:08:20 -07:00
Scott Lahteine	9ba8cf5fe3	Merge pull request #2061 from thinkyhead/wait_before_g28 Always do st_synchronize() before G28	2015-05-12 02:05:30 -07:00
Scott Lahteine	873f7d6f2a	Check that configs are up-to-date	2015-05-12 01:33:51 -07:00
Christian Bohn	f48599f172	add pin definition to some motherboards	2015-05-12 10:02:23 +02:00
Scott Lahteine	b5200e184c	Remove extra setup_for_endstop_move	2015-05-12 01:01:53 -07:00
Scott Lahteine	8d814de558	Return void in prevent_dangerous_extrude	2015-05-12 00:55:00 -07:00
Scott Lahteine	367e2eb9f4	Global setup_for_endstop_move	2015-05-12 00:51:22 -07:00
Wurstnase	1d5677cc3b	add missing Z-bits	2015-05-12 09:36:19 +02:00
Wurstnase	df12e68e7d	add missing Z_PROBE-bit	2015-05-12 09:33:24 +02:00
Scott Lahteine	fa951f8a0b	Always do st_synchronize() before G28	2015-05-12 00:31:51 -07:00
Christian Bohn	27a3b1d895	disable sled pin by default	2015-05-12 08:51:01 +02:00
Christian Bohn	fb44b53ae3	sled improvements - create sled pin definition - G28 Works with sled	2015-05-11 23:22:19 +02:00
Wurstnase	46d1932380	add plan buffer remaining for 'P' and block buffer remaining 'B'	2015-05-11 13:04:00 +02:00
Scott Lahteine	429c6ccad2	Neaten config formatting	2015-05-10 23:27:00 -07:00
Scott Lahteine	8a0dc4d54a	Merge pull request #1922 from Wurstnase/serial_wait Serial wait	2015-05-10 23:10:25 -07:00
Scott Lahteine	8332a15899	Fix testing of runaway options in temperature.cpp	2015-05-10 23:03:24 -07:00
Wurstnase	526ad82d20	activate advanced_ok and no_timeout	2015-05-11 08:01:51 +02:00
Scott Lahteine	2b92b01afc	Fix typo in SanityCheck.h	2015-05-10 22:58:37 -07:00
Scott Lahteine	2445ae3d3a	Combine thermal runaway and watch-period - Make thermal protection for all hotends and/or bed into simple switches - Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is enabled - Move detailed thermal parameters to `Configuration_adv.h` - Add sanity checks to warn about old configurations - Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds	2015-05-10 22:52:01 -07:00
Scott Lahteine	4097207c75	Merge pull request #2041 from thinkyhead/watch_temp More thermal protection	2015-05-10 21:39:05 -07:00
Scott Lahteine	45d64040fe	Merge pull request #2048 from Wurstnase/hit_bits replace some bools	2015-05-10 20:37:17 -07:00
Scott Lahteine	9b3d4380d3	Only watch the heater that was set	2015-05-10 20:26:45 -07:00
Scott Lahteine	52c0696e44	Merge pull request #2044 from thinkyhead/fix_servos_too Make some z probe and servo code tweaks	2015-05-10 20:10:42 -07:00
Wurstnase	b55f32f8a1	replace some bools this PR replaces some bools with one char. this will safe 3 bytes and should also be sometimes a little bit faster.	2015-05-10 21:37:39 +02:00
Laurent DELAGE	e70e6e2b48	Correction traductions	2015-05-10 15:38:50 +02:00
Scott Lahteine	f73f4ce555	Make some z probe and servo code tweaks	2015-05-09 19:11:19 -07:00
Scott Lahteine	28c87ec81b	Disable all heaters on temp error	2015-05-08 23:17:25 -07:00
Scott Lahteine	79106638a8	Fix documentation of heating sanity check	2015-05-08 22:50:08 -07:00
Scott Lahteine	6110494a56	Change default to 4°C in 16s	2015-05-08 22:41:12 -07:00
Scott Lahteine	54deb9eea3	Enable WATCH_TEMP_PERIOD by default	2015-05-08 22:36:02 -07:00
Scott Lahteine	deedb00c18	Document WATCH_TEMP_PERIOD	2015-05-08 22:25:51 -07:00
Scott Lahteine	be77cfd895	Merge pull request #2032 from Wurstnase/toshiba_for_all_stepper We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER …	2015-05-08 20:32:30 -07:00
Scott Lahteine	cb4ea75fab	Support for MKS BASE 1.0 board	2015-05-08 19:07:37 -07:00
Scott Lahteine	0e70511381	Merge pull request #2036 from brupje/mainline Fixes for reprapworld's keypad	2015-05-08 18:19:31 -07:00
Wurstnase	0cb87795a3	advanced 'ok' ok N(linenumber) P(bufferremaining) the host can use this to send the data much faster. Some pseudo code: If (bufferremaining > 0) send command ## as long there is free buffer send command Also if (linenumber > lastsend - bufferremaining) send command ## as long last linenumber received is bigger than lastsend (host) - last bufferremaining received	2015-05-08 22:28:51 +02:00
Wurstnase	182e0d99c9	Merge remote-tracking branch 'Marlin8bit/Development' into serial_wait	2015-05-08 21:27:18 +02:00
brupje	d1148a0198	Rename Configuration_megatronics.h to Configuration.h	2015-05-08 14:36:23 +02:00
Scott Lahteine	7f3252eea9	Merge pull request #1999 from paclema/Filrunout_configurable_script Added configurable script for filrunout from configuration.h	2015-05-08 04:39:59 -07:00
Scott Lahteine	181ccc884c	Edit thermal runaway description	2015-05-07 20:46:03 -07:00
Wurstnase	073e4af7e2	We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER are also good for non-Toshiba stepper driver.	2015-05-07 18:55:47 +02:00
brupje	b7fcb11580	Added example configuration for Megatronics	2015-05-07 13:18:05 +02:00
brupje	8f8174dc93	Revert "Default configuration for megatronics." This reverts commit `22e0d2afcb`.	2015-05-07 13:12:17 +02:00
Scott Lahteine	79633a74ab	Fix MBL compile error	2015-05-06 14:25:13 -07:00
brupje	ba9741139e	Clean up pins file for megatronics	2015-05-05 14:01:52 +02:00
brupje	22e0d2afcb	Default configuration for megatronics.	2015-05-05 14:01:20 +02:00
brupje	816aa19861	Up/down buttons were reversed, swapped the assignments	2015-05-05 13:04:46 +02:00
brupje	df4d50579a	This is conflicting with the settings in ultralcd.h. Not sure why it' s redefined here anyway.	2015-05-05 12:47:24 +02:00
brupje	8f8bf3a897	Make Marlin actually compile when #define REPRAPWORLD_KEYPAD is uncommented	2015-05-05 11:03:20 +02:00
Scott Lahteine	777f2d3820	Merge pull request #2018 from fmalpartida/bugFixing Bug corrected: persistent HOMING message when HOME button pressed for homing.	2015-05-05 00:12:32 -07:00
Scott Lahteine	ecb46de349	Merge pull request #2013 from bq/Fix_lowercase Fixed lowercase change missing on commit `a22a228b`.	2015-05-04 23:50:56 -07:00
fmalpartida	150a35eff8	Bug corrected: Persistent homing message. Message was declared as an alert, therefore it was persistent. Updated to message.	2015-05-04 19:48:49 +02:00
Gina Häußge	ab246ab032	Reverting changes to error messages on serial console This reverts the changes done to the error message for line number mismatches done in commit `d43cc2dd5f`	2015-05-04 15:03:00 +02:00
Ivan Galvez Junquera	59529b755d	Fixed lowercase change missing on commit `a22a228b`. Servo.cpp and Servo.h were changed to lowercase in Makefile but not their actual filenames.	2015-05-04 09:44:34 +02:00
Scott Lahteine	df4c104637	Merge pull request #2012 from BrianGilbert/Development Add example configuration for Boots Industries V2.5 Delta Printer	2015-05-03 20:42:32 -07:00
Scott Lahteine	1f039cde61	Merge pull request #1992 from thinkyhead/too_many_probes Stow Z probe on M402 without extra raise	2015-05-03 20:40:26 -07:00
Brian Gilbert	1285784a49	Add Boots Industries V2.5 example configuration	2015-05-04 09:10:42 +10:00
Scott Lahteine	35493e1af9	Tweak to planner.cpp position.debug	2015-05-03 16:03:05 -07:00
paclema	26015b02d8	Fixed typo and updated Configuration.h of configurator	2015-05-03 02:39:34 +02:00
paclema	aedd580911	Updated all configuration.h examples	2015-05-03 02:28:43 +02:00
Scott Lahteine	2c892fca6a	Cleanup of language.h	2015-05-01 21:38:32 -07:00
Scott Lahteine	2db384a21d	Fix compile error in configuration_store.cpp	2015-05-01 21:15:26 -07:00
Scott Lahteine	ca8cec8e8a	Merge pull request #1998 from paclema/Filament_runout_fix Fixed sintaxis error of filament runout	2015-04-29 19:53:25 -07:00
Scott Lahteine	425cd46c12	Merge pull request #1993 from AnHardt/TRP-bed Enable TRP for the bed	2015-04-29 19:44:50 -07:00
Scott Lahteine	d4c74b8f8c	Don't apply M428 if an error occurs - Also move audio feedback into the command - Added shorthand for `lcd_buzz` availability	2015-04-29 19:05:48 -07:00
Scott Lahteine	d065d37822	Add M428 to set home_offset logically	2015-04-29 18:26:16 -07:00
paclema	013a09dbe6	Added configurable script for filrunout form configuration.h	2015-04-29 21:38:40 +02:00
paclema	4dcc0fd55a	Fixed sintaxis error of filament runout	2015-04-29 21:32:27 +02:00
AnHardt	514d8ac460	Enable TRP for the bed in all Configurations.	2015-04-29 08:47:01 +02:00
Scott Lahteine	ce3caf447b	Tweak how homeaxis deploys and stows	2015-04-28 19:17:48 -07:00
Scott Lahteine	a235dca79c	Stow z on M402 without extra raise	2015-04-28 19:10:07 -07:00
Scott Lahteine	2610b8d047	Enable thermal runaway protection by default	2015-04-28 17:40:29 -07:00
AnHardt	b4b19a6cbd	Merge https://github.com/MarlinFirmware/Marlin into Bulgarian Conflicts: Marlin/Configuration.h Marlin/configurator/config/Configuration.h Marlin/example_configurations/Felix/Configuration.h Marlin/example_configurations/Felix/Configuration_DUAL.h Marlin/example_configurations/Hephestos/Configuration.h Marlin/example_configurations/K8200/Configuration.h Marlin/example_configurations/SCARA/Configuration.h Marlin/example_configurations/WITBOX/Configuration.h Marlin/example_configurations/delta/generic/Configuration.h Marlin/example_configurations/delta/kossel_mini/Configuration.h Marlin/example_configurations/makibox/Configuration.h Marlin/example_configurations/tvrrug/Round2/Configuration.h Conflicts with my Chinese implementation resolved.	2015-04-28 09:24:32 +02:00
Scott Lahteine	7548a56f64	Merge pull request #1886 from ex-nerd/pins_BRAINWAVE_PRO Add pin configuration for Brainwave Pro	2015-04-27 23:13:26 -07:00
Scott Lahteine	02acf0641a	Merge pull request #1983 from CONSULitAS/Development_Update_language_de.h language_de.h: updated translation and minor typos	2015-04-27 22:45:24 -07:00
Scott Lahteine	a120bf3fe4	Latest upstream commits	2015-04-27 22:40:19 -07:00
Scott Lahteine	3688256f86	Merge pull request #1974 from thinkyhead/eeprom_in_gcode Make EEPROM reproducible in GCode	2015-04-27 22:35:41 -07:00
Scott Lahteine	ae53b3cdc3	Fix the M303 S-1 report text	2015-04-27 22:25:00 -07:00
Scott Lahteine	c1fbef1722	Merge pull request #1988 from thinkyhead/bye_string_url Remove obsolete STRING_URL	2015-04-27 22:12:05 -07:00
Scott Lahteine	31516e2a3b	Merge pull request #1985 from Arengorn/Development Update of servo.h	2015-04-27 22:10:02 -07:00
Scott Lahteine	185f8a0a66	Merge pull request #1917 from CONSULitAS/Development_Update_K8200_Config Example Configuration for K8200: comments/URL/readme	2015-04-27 21:59:56 -07:00
Scott Lahteine	0970102950	Remove obsolete STRING_URL	2015-04-27 21:59:14 -07:00
Scott Lahteine	0f687b5dda	Merge branch 'Development' into eeprom_in_gcode Latest upstream commits	2015-04-27 21:47:47 -07:00
Scott Lahteine	28aef684b4	Merge pull request #1957 from Voxel8/sjk/home_y_before_x Allow Y to home before X with option in Configuration_adv.h.	2015-04-27 21:41:14 -07:00
Scott Lahteine	c1dd9bda7f	Merge pull request #1987 from thinkyhead/fix_homing_zpos Disable endstops between homing bumps	2015-04-27 21:16:47 -07:00
Scott Lahteine	71a0b1a5bb	Disable endstops between homing bumps	2015-04-27 21:14:30 -07:00
Scott Lahteine	8c28e36e75	Merge pull request #1986 from thinkyhead/fix_homing_zpos Fix homing Z position	2015-04-27 20:58:14 -07:00
Scott Lahteine	c36226c4dc	Fix homing Z position Add `sync_plan_position()` after `axis_is_at_home(axis)` to keep the planner position in sync when homing.	2015-04-27 20:55:19 -07:00
Scott Lahteine	2bc1d70a31	Merge pull request #1977 from AnHardt/Cinese2 We mark this historic day, when Marlin went to China.	2015-04-27 20:37:00 -07:00
Scott Lahteine	ff178d8cf7	Change M421 to take coordinates This makes `M421` more amenable for irregular matrices	2015-04-27 19:48:34 -07:00
Bernardo	e449659338	Update Servo.cpp Updated "servo.h" to "Servo.h"	2015-04-27 23:30:11 -03:00
Bernardo	ff67ee73fc	Update Marlin_main.cpp Corrected "servo.h" to "Servo.h" because of the updated filename.	2015-04-27 23:29:16 -03:00
Scott Lahteine	5b248757c7	Level Bed in Prepare submenu - Add “Level Bed” menu item for auto bed leveling - Hide the option if homing has not been done yet - Arrange the Prepare submenu more logically (?) - Add documentation comments, some white-space - Apply some coding standards here and there - Move old encoder multiplier debug option to `ultralcd.cpp`	2015-04-27 19:11:25 -07:00
CONSULitAS	c5dfb35597	language_de.h: updated translation and minor typos language_de.h: updated translation and minor typos	2015-04-28 01:03:54 +02:00
CONSULitAS	6423fe7601	language.h: update documentation / URL für K8200 language.h: update documentation for LANGUAGE_INCLUDE language.h: URL für K8200 github repository	2015-04-28 01:01:57 +02:00
CONSULitAS	6af40e9dc0	K8200 example Configuration.h: STRING_URL removed K8200 example Configuration.h: * STRING_URL removed: like proposed by thinkyhead in #1917	2015-04-27 23:59:10 +02:00
CONSULitAS	d1c1f766d5	Merge remote-tracking branch 'upstream/Development' into K8200_2015-04-23_TEST Conflicts: Marlin/example_configurations/K8200/Configuration.h	2015-04-27 23:54:47 +02:00
Steve Kelly	98ca46006c	Allow Y to home before X with option in Configuration_adv.h. This addresses comments in #1956 and #1079. In particular, this is useful when both endstops are stationary on a CoreXY system, and the Y axis needs to be homed before the X so the flags are aligned.	2015-04-27 16:17:30 -04:00
AnHardt	6cba6bcd82	Add 'cn' to the other 'Configuration.h's	2015-04-27 13:24:51 +02:00
AnHardt	1d9699be0f	Add some doku	2015-04-27 13:16:20 +02:00
AnHardt	76b12edecf	Give TALL_FONT_CORRECTION a default	2015-04-27 12:47:11 +02:00
AnHardt	6b1b71837c	Intit. commit for Chinese Edited the European part of 'ISO10646_CN.fon' to match the existing fonts. Added Chinese font to make_fonts.bat Created 'dogm_font_data_ISO10646_CN.h' Added Chinese to 'language.h' Added 'language_cn.h' with some minor edits. Added Chinese font in 'language_en.h' to not fall back to European font. Added cn to 'Configuration.h' Changed WIDTH to LCD_PIXEL_WIDTH and HEIGHT to LCD_PIXEL_HEIGHT to have more descriptive names. In 'dogm_lcd_implementation.h' Added Chinese Font Made 1 pixel more room for the larger Chinese font on the status line. Changed geometry of the 'select bar' by one pixel. Changed the way the position for values and postcars are set.	2015-04-27 12:15:36 +02:00
Scott Lahteine	fb379384ee	Reduce MBL eeprom read code	2015-04-26 21:06:04 -07:00
Scott Lahteine	0fca084ea6	Make EEPROM reproducible in GCode With these changes the output of `M503 S0` is all you need to restore the EEPROM. Building on this it is straightforward to save and restore the EEPROM state using the SD card or external GCode file. - Added `M145` to set “heatup states” for the LCD menu - Added `M420` to toggle Mesh Bed Leveling - Added `M421` to set a single Mesh coordinate - Extended `Config_PrintSettings` with added M codes - Cleaned up some comments here and there	2015-04-26 20:56:33 -07:00
Scott Lahteine	d43cc2dd5f	M111 - Debug Level - Add `M111` as a standard option to set the debug level - Implement `DEBUG_ECHO` in `process_commands` - Other debug levels (e.g., `DEBUG_DRYRUN`) need more work	2015-04-26 20:08:45 -07:00
Scott Lahteine	0ec444720f	Rename blinkm files	2015-04-25 21:06:19 -07:00
Scott Lahteine	a22a228bcc	Rename files to move them in the IDE	2015-04-25 21:04:54 -07:00
Scott Lahteine	a932e7490f	No noTone needed, but delay is	2015-04-25 03:25:30 -07:00
Scott Lahteine	9c5d14ea68	Fix BEEPER duration	2015-04-25 03:12:49 -07:00
Scott Lahteine	5c29fda167	Add a warning for DISABLE_[XYZ] options	2015-04-25 00:46:33 -07:00
Scott Lahteine	0438f0d835	Merge pull request #1924 from thinkyhead/raise_z_for_m401_m402 Raise Z for M401 and M402	2015-04-24 22:41:12 -07:00
Scott Lahteine	a640cad139	Merge pull request #1967 from thinkyhead/g4_dwell_message Use millis_t for progress_bar_ms and expire_status_ms	2015-04-24 22:17:28 -07:00
Scott Lahteine	c92b59952a	Use millis_t for progress_bar_ms and expire_status_ms	2015-04-24 22:16:09 -07:00
Scott Lahteine	b275946a52	Merge pull request #1966 from thinkyhead/g4_dwell_message G4 shows status message only if no message is set already	2015-04-24 22:02:37 -07:00
Scott Lahteine	97dfa0365d	Rename expireStatusMillis to expire_status_ms	2015-04-24 21:51:10 -07:00
Scott Lahteine	7295640f44	Remove extraneous ;	2015-04-24 21:37:27 -07:00
Scott Lahteine	0d8c00d3f6	Define lcd_hasstatus for no lcd also	2015-04-24 21:36:04 -07:00
Scott Lahteine	182f2cda35	Minor cleanup of M48	2015-04-24 21:26:36 -07:00
Scott Lahteine	3a6fd912cd	Latest upstream commits, merged	2015-04-24 21:14:13 -07:00
Scott Lahteine	3c9e94e035	Merge pull request #1964 from AnHardt/Max6675again Add variant for MAX6675 in M104	2015-04-24 20:44:45 -07:00
Scott Lahteine	56ff46eb8b	Improve code_has_value test	2015-04-24 20:43:16 -07:00
Scott Lahteine	ce142afdda	G4 shows status message only if no message is set already - Address issue raised in #1961	2015-04-24 20:13:01 -07:00
Scott Lahteine	35e79d56a5	Remove set-coordinate extension of G28	2015-04-24 19:23:12 -07:00
Scott Lahteine	3a74bb5039	Merge pull request #1945 from Wurstnase/max_endstopp Max endstopp	2015-04-24 19:17:38 -07:00
AnHardt	0fed46360c	Add variant for MAX6675 in M104 Else will throw error: @:0 B@:0 Error:No thermistors - no temperature [ERROR] Error:No thermistors - no temperature when no bed is defined	2015-04-24 16:43:19 +02:00
Wurstnase	79a44a9de3	stepper.cpp macros rework delete some tabs	2015-04-24 08:03:17 +02:00
Scott Lahteine	588ed70d4a	Latest upstream commits, merged	2015-04-23 21:18:48 -07:00
Scott Lahteine	0165560333	Apply zprobe_zoffset in axis_is_at_home Ensure the probe offset will always be included when homing Z.	2015-04-23 21:12:38 -07:00
Scott Lahteine	075386e7fe	Merge pull request #1959 from thinkyhead/lcd_move_rate Include axis parameter to ultralcd's line_to_current	2015-04-23 21:06:57 -07:00
Scott Lahteine	2558c10c6c	Use the slower feedrate for XY axes	2015-04-23 20:06:17 -07:00
Scott Lahteine	31932912dd	Use AxisEnum instead of int for _lcd_move	2015-04-23 19:32:37 -07:00
Scott Lahteine	c2e11daf66	Merge pull request #1958 from thinkyhead/redo_1937 Fix homing of YZ with DUAL_X_CARRIAGE	2015-04-23 19:12:51 -07:00
Scott Lahteine	c3560e0288	Include axis parameter to ultralcd's line_to_current	2015-04-23 19:10:09 -07:00
Scott Lahteine	a0a5ff61c4	Merge pull request #1951 from AnHardt/Azteeg_x3 Fix for #1946	2015-04-23 18:40:00 -07:00
Scott Lahteine	0094481e55	Merge pull request #1955 from AnHardt/langlang Add DISPLAY_CHARSET_HD44780_CYRILLIC as alternative in SanityCheck.h	2015-04-23 18:36:06 -07:00
Scott Lahteine	64268f3312	Fixup axis_is_at_home a little	2015-04-23 18:16:44 -07:00
Scott Lahteine	996d0a9185	Squish the code down a little	2015-04-23 18:06:36 -07:00
Scott Lahteine	8534bc376c	Fix homing of YZ with DUAL_X_CARRIAGE	2015-04-23 17:56:37 -07:00
Scott Lahteine	3b97a7d446	Merge pull request #1944 from AnHardt/beep2 More Beeper clean up	2015-04-23 17:50:02 -07:00
Wurstnase	be9e4ceddc	fix typo c'n'p ftw :/	2015-04-23 10:35:14 +02:00
unknown	c26d816839	filter any 0	2015-04-22 12:09:57 +02:00
AnHardt	f2c94b3298	tone will end automaticly	2015-04-22 01:49:55 +02:00
AnHardt	c5e0e29d23	Add DISPLAY_CHARSET_HD44780_CYRILLIC as alternative in SanityCheck.h and add some documentation - how to integrate a new font.	2015-04-21 21:42:00 +02:00
AnHardt	b59e92ab99	Fix for #1946 Syntax error.	2015-04-21 13:50:28 +02:00
Wurstnase	61ae43f35e	v <-> code_value	2015-04-20 23:31:10 +02:00
Wurstnase	da0d91a79b	max endstopp no user will home to 0 with a max endstopp	2015-04-20 23:28:46 +02:00
AnHardt	3a27a78f9e	Commented REPRAP_DISCOUNT_SMART_CONTROLLER again and removed some tabs.	2015-04-20 15:01:43 +02:00
AnHardt	064f2b37d0	More Beeper clean up. Centralised beep code to lcd_buzz(). From gcode_M300() and lcd_quick_feedback(). Enforced max. duration for M300 to 5 seconds. Corrected description in 'Configuration.h' LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of LCD_FEEDBACK_FREQUENCY_DURATION_MS.	2015-04-20 11:11:13 +02:00
Wurstnase	92575cecca	new timout/add adv_ok	2015-04-20 00:22:40 +02:00
AnHardt	671aaf2dc9	Minor fix for M300 Corrected wrong order of parameters.	2015-04-19 13:25:20 +02:00
Scott Lahteine	d931220a65	Tweak comments	2015-04-18 23:12:29 -07:00
Scott Lahteine	47847765e2	Add M410 QuickStop command	2015-04-18 23:07:48 -07:00
Scott Lahteine	a4ca87ba99	Merge pull request #1933 from bq/Fix_stray_in_configuration Fixed compilation error "error: stray ‘\357’ in program"	2015-04-18 03:56:31 -07:00
Scott Lahteine	5e3bb4bdf3	Merge pull request #1931 from paclema/M303_echo Added new PID autotune info, to make easy copy & paste results to marlin	2015-04-18 03:49:31 -07:00
Ivan Galvez Junquera	b99e63a7bf	Fixed compilation error "error: stray ‘\357’ in program" in several configuration files. Introduced in commit `697ee2dc` and later spread to other files.	2015-04-17 16:10:58 +02:00
paclema	581685a231	Added new PID autotune info, to make easy copy & paste results to marlin	2015-04-17 11:15:09 +02:00
Chris Palmer	483384aaa4	Fixed faulty comment merge	2015-04-17 09:31:53 +01:00
Chris Palmer	cc6b7cf3ce	Fixed some comment spellings.	2015-04-17 09:28:08 +01:00
Chris Palmer	e4595fa24a	Fixed jump in speed when using high accelerations on axes with lots of steps. I.e., when acceleration * steps per mm > 2,000,000. This was done by changing MultiU24X24toH16 to take a 32b bit operand. Removed the claim that stepper.cpp uses the Leib algorithm.	2015-04-16 23:04:38 +01:00
Wurstnase	b09a957fce	make 'wait' optional and mark as workaround	2015-04-16 21:42:54 +02:00
Scott Lahteine	63b98b8280	Raise Z for M401 and M402	2015-04-16 07:24:33 -07:00
wurstnase	d69da22f7c	last_command_time inside get_command()	2015-04-16 16:20:23 +02:00
Scott Lahteine	53be0f3399	Babystep delay 2us	2015-04-16 04:16:36 -07:00
wurstnase	574e2d856e	remove config	2015-04-16 13:07:20 +02:00
paclema	cde5eee2a5	Removed unnecessary comments	2015-04-15 19:01:09 +02:00
paclema	e1b69db6d1	Fixed M48 mismatch between n and P parameter on documentation	2015-04-15 18:17:58 +02:00
CONSULitAS	1de9b568db	Example Configuration for K8200: comments/URL/readme Example Configuration for K8200 : comments/URL/readme example_configurations\K8200\Configuration.h: * add machine specific header * change STRING_URL to K8200 fork (@thinkyhead: What do you think?) example_configurations\K8200\readme.md: * updated documentation * added URLs and links	2015-04-15 10:02:13 +02:00
CONSULitAS	0af5e3a04f	Example Configuration for K8200: comments/URL/readme Example Configuration for K8200 : comments/URL/readme example_configurations\K8200\Configuration.h: * add machine specific header * change STRING_URL to K8200 fork (@thinkyhead: What do you think?) example_configurations\K8200\readme.md: * updated documentation * added URLs and links	2015-04-15 10:00:41 +02:00
Scott Lahteine	637babb99b	Merge pull request #1915 from elgambitero/Development Some minor translations to spanish	2015-04-14 19:59:39 -07:00
elgambitero	cb9ac490d4	Some minor translations to spanish	2015-04-14 23:14:52 +02:00
CONSULitAS	3851ac6226	Example Configuration for K8200 back in sync example_configurations\K8200\Configuration.h: * merge upstream changes from default Configuration.h manually * add some machine specific comments	2015-04-14 17:12:42 +02:00
CONSULitAS	b447a4ffab	Merge remote-tracking branch 'upstream/Development' into Development	2015-04-14 15:35:08 +02:00
Scott Lahteine	7336e6df07	Always define old_z, not always z2	2015-04-14 04:55:20 -07:00
Scott Lahteine	5dd87d2e74	Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS - Potentially addressing #1911	2015-04-14 04:05:51 -07:00
Scott Lahteine	3f02da646c	Make sure axis_active is cleared for #1908	2015-04-14 03:41:37 -07:00
Scott Lahteine	e0e68c5cbc	Rename servos[] array in Marlin to servo[]	2015-04-14 03:13:25 -07:00
Chris Petersen	ffaf1b4f22	Add pin configuration for Brainwave Pro Copied from jcrocholl's contributions to the OpenBeamUSA Marlin fork	2015-04-13 23:46:57 -07:00
Scott Lahteine	642f6a92bc	fix type of code_has_value	2015-04-13 18:02:17 -07:00
Scott Lahteine	17ad80c1e1	Spacing in XYZ_CONSTS	2015-04-13 17:58:47 -07:00
Scott Lahteine	09d60e0128	Naming and code comments	2015-04-13 17:17:36 -07:00
Mehmet Sutas	5a9e45cc4a	Fix Syntax Error Filament Runout Statement	2015-04-13 22:37:18 +03:00
Scott Lahteine	257a907456	Fix typo in next_bed_check_ms	2015-04-12 23:17:28 -07:00
Scott Lahteine	e4b1e8651b	next_ vars faster than previous_ - Change some `previous_` time vars to `next_` so an add only happens at intervals - Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all	2015-04-12 23:06:50 -07:00
Scott Lahteine	ccddc280be	Apply three more commits	2015-04-12 22:47:44 -07:00
Scott Lahteine	74e4b42f7e	Default MACHINE_NAME to "3D Printer"	2015-04-12 17:17:41 -07:00
Scott Lahteine	8857b9e921	Use the extruder argument in plan_buffer_line	2015-04-12 16:57:00 -07:00
Scott Lahteine	ac2b23f574	Homing fixes - Prevent `Z_SAFE_HOMING` from homing Z twice in some cases - Allow `G28` with XYZ values of 0 to explicitly set the position - Don’t add `home_offset` when setting XYZ explicitly in `G28` - Add `code_has_value` function to check for the presence of a numeric value (could just test for space or nul to allow other types of values)	2015-04-11 20:06:48 -07:00
Scott Lahteine	055b11814a	Additional cleanup of ultralcd.cpp	2015-04-11 04:56:08 -07:00
Scott Lahteine	388dd0cfa5	Fix doubled lcd_quick_feedback - MENU_ITEM causes lcd_quick_feedback to be called, so only those calls to `lcd_goto_menu` outside of the `MENU_ITEM` macro need to set the `feedback` flag when calling `lcd_goto_menu`.	2015-04-11 04:45:04 -07:00
Scott Lahteine	c6bb98abad	machine name for hephestos too	2015-04-11 01:36:24 -07:00
Scott Lahteine	ccbe2c4ea3	Apply CUSTOM_MACHINE_NAME to configurations - Replace “Mendel” with “RepRap”	2015-04-10 21:29:42 -07:00
Scott Lahteine	5fe382949b	Some G-Codes comment cleanup	2015-04-10 16:16:13 -07:00
Scott Lahteine	8b16ebe705	Break out prevent_dangerous_extrude feature - It’s inline here, but could be a macro and duplicated for `planner.cpp`	2015-04-09 22:40:37 -07:00
Scott Lahteine	740152ee70	Merge branch 'Development' into cold_extrude Latest upstream commits	2015-04-09 20:23:47 -07:00
Scott Lahteine	5914d9d7de	Shuffling declarations..	2015-04-09 20:21:30 -07:00
Scott Lahteine	b328c6e6b6	Shuffling declarations.	2015-04-09 20:05:10 -07:00
Scott Lahteine	fb4cefc91d	Define lcd_move_[xyz] ahead of lcd_move_menu_axis	2015-04-09 19:33:16 -07:00
Richard Miles	4c3736ed43	Feature: Add RAMPS CNC Controller Board Created a new board to make using RAMPS as a CNC machine controller easier. It maps pin 8 to the spindle and pin 9 to the controller fan.	2015-04-09 16:32:56 +01:00
Scott Lahteine	9189cc66ab	Fix moves for DELTA for MANUAL_BED_LEVELING - Use `line_to_current` in place of `plan_buffer_line`	2015-04-09 04:32:14 -07:00
AnHardt	56fc3a4835	bgr -> bg + update in documentation	2015-04-09 13:09:18 +02:00
Scott Lahteine	7a1aef1450	Merge pull request #1877 from AnHardt/display-only Made encoderPosition and quick_feedback dependant on NEWPANEL	2015-04-09 03:54:05 -07:00
Scott Lahteine	6096164d79	Merge pull request #1878 from thinkyhead/cold_extrude Cold extrude	2015-04-09 03:41:54 -07:00
Scott Lahteine	a488445cbe	Fix spelling of "too"	2015-04-09 03:41:31 -07:00
Scott Lahteine	b1950a7f25	Merge pull request #1875 from Natealus/Development Z Probe inverting not present in example configs, causes error	2015-04-09 03:37:24 -07:00
AnHardt	df50523605	Made encoderPosition and quick_feedback dependant on NEWPANEL where the hardware is available. Fix for #1873	2015-04-09 12:26:45 +02:00
Scott Lahteine	2ca099d1e7	Merge pull request #1876 from thinkyhead/cold_extrude Catch dangerous extrude before trying several	2015-04-09 03:21:19 -07:00
Scott Lahteine	837ceb9abb	Merge pull request #1867 from epatel/Development Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS	2015-04-09 02:29:47 -07:00
Scott Lahteine	a95544f92a	Spell adjustment	2015-04-09 02:04:06 -07:00
Scott Lahteine	a00ebf03d4	Merge pull request #1868 from AnHardt/LCD_STR Moved the definitions of the LCD_STR_* to Conditionals.h	2015-04-09 01:56:23 -07:00
Scott Lahteine	1269c445ab	Catch dangerous extrude before trying several	2015-04-09 01:40:48 -07:00
Natealus	585eee6549	Z Probe inverting not present in example configs, causes error The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop is in the main configuration.h but wasn't present in the example configuration.h's. Causes a compiling error with Z Probe enabled. Just added it to all the configs. :)	2015-04-08 18:57:30 -06:00
AnHardt	c5961892e3	Bulgarian for all the Configuration.h's	2015-04-09 01:52:13 +02:00
AnHardt	6248c93f37	Introduction of Bulgarian - language_bgr.h Thank you @Nprod!	2015-04-09 01:26:48 +02:00
AnHardt	540dbb35e2	And an other MSG_BED in Marlin_main.cpp	2015-04-09 01:16:06 +02:00
AnHardt	14d4419e16	Replaced SERIAL_PROTOCOLPGM(MSG_BED) with SERIAL_PROTOCOLPGM("Bed") Resolved some warnings in Marlin_main.cpp regarding compares of signed and unsigned integers by replacing 'int' or 'uint16_t' with 'uint8_t'.	2015-04-08 23:59:01 +02:00
AnHardt	ea897654a4	Moved the definitions of the LCD_STR_* to Conditionals.h to avoid errors in Marlin_main.cpp. #1860 In the include tree of Marlin_main.cpp the decision between the display types is not made. To include the right LCD_STR_* ether 'dogm_lcd_implementation.h' or 'ultralcd_implementation_hitachi_HD44780.h' with all their code. A 'dogm_lcd_implementation.h.h' would be a curiosity. So i moved both of the definition blocks to conditionals.h On the long term it could make sense to use the same numbering for the u8glib and the hitachi symbols.	2015-04-08 21:53:58 +02:00
Edward Patel	7dc64efe67	Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS	2015-04-08 20:52:48 +02:00
AnHardt	6a514f3dc9	Aplied HAS_LCD_CONTRAST also to Marlin_main.cpp and cleaned typo.	2015-04-08 13:26:29 +02:00
AnHardt	a76fb42ca6	Merge https://github.com/MarlinFirmware/Marlin into contrast	2015-04-08 13:05:21 +02:00
AnHardt	bcc04192fc	Remove Contrast Menu for U8GLIB_ST7920 The other two devices we use in u8glib have more than only dummy code. Checked this in the library code.	2015-04-08 12:56:38 +02:00
Scott Lahteine	4788b59300	Thermistor values for configurator	2015-04-08 03:12:21 -07:00
Scott Lahteine	bb917ecda8	Merge pull request #1853 from thinkyhead/dev_version Set version to "1.0.3 dev"	2015-04-08 01:57:51 -07:00
Scott Lahteine	caa7734402	Merge pull request #1864 from thinkyhead/is_running IsStopped / IsRunning inline	2015-04-08 01:10:36 -07:00
Scott Lahteine	3162971cd6	current_position not static	2015-04-08 01:05:39 -07:00
Scott Lahteine	27cb90da8b	IsStopped / IsRunning inline	2015-04-08 00:56:19 -07:00
Max	07fc2b5b70	Update language_ru.h	2015-04-08 13:18:45 +06:00
Scott Lahteine	756bb5e268	Cleanup formatting in hitachi & dogm lcd	2015-04-07 22:04:10 -07:00
Scott Lahteine	7431ef7e2d	Merge branch 'Development' into dev_version Latest upstream commits	2015-04-07 21:14:00 -07:00
Scott Lahteine	43773ff735	Formatting and lcd contrast masking	2015-04-07 21:11:03 -07:00
Scott Lahteine	eb6e3886f4	Set version to "1.0.3 dev"	2015-04-07 20:38:43 -07:00
Scott Lahteine	cf9b58452c	Minimum delay in menu click feedback Squished #1849	2015-04-07 20:20:30 -07:00
Scott Lahteine	1d291be2ba	Fix de after PREVENT_DANGEROUS_EXTRUDE - Set `de` to 0 when `position[E] = target[E]` - Address regression mention in #1846	2015-04-07 20:01:08 -07:00
Scott Lahteine	e03da4805b	Merge pull request #1774 from epatel/Development Mesh bed leveling: Added G29 S3 + finer display steps during manual input + bug fix	2015-04-07 19:24:46 -07:00
Scott Lahteine	f7c4e7e19f	Fix G29 not deploying in some instances	2015-04-07 15:38:29 -07:00
Edward Patel	a9ed39b12d	Moved checks into SanityCheck.h + removed previous added checks.	2015-04-07 22:58:08 +02:00
Edward Patel	002340f32c	Merge branch 'Development-Marlin' into Development	2015-04-07 22:49:12 +02:00
Scott Lahteine	c379f17117	Encapsulate setting of homing_bump_feedrate	2015-04-06 23:21:33 -07:00
Scott Lahteine	7d2c2f1790	Updates for the configurator - Sections in all `Configuration_adv.h` - Recognize JAPANESE/WESTERN/CYRILLIC options - Better capturing of comments for tooltips	2015-04-06 23:16:01 -07:00
Scott Lahteine	967db181d0	Latest upstream commits	2015-04-06 21:46:18 -07:00
Scott Lahteine	e502144eda	Fixup formatting of last commit	2015-04-06 21:28:14 -07:00
Scott Lahteine	d05efa008d	Merge pull request #1825 from shaggythesheep/bugfix_no_heaters Bugfix: Temperature checks when no heaters in use	2015-04-06 21:25:22 -07:00
Scott Lahteine	d20f42c883	Don't stow the probe until the last grid point! - Address Issue #1682 at hash #issuecomment-89756858	2015-04-06 20:58:09 -07:00
Scott Lahteine	5c2bb05af3	Merge pull request #1839 from AnHardt/fix-statusmessage Fix lcd_status_message	2015-04-06 19:08:25 -07:00
Scott Lahteine	d70a4a3847	Merge pull request #1823 from AnHardt/splashscreen Disable splash-screen when done once	2015-04-06 18:48:48 -07:00
Scott Lahteine	56aea5f8e5	Merge pull request #1829 from Natealus/Development Azteeg X3 Pro Pin fix ups	2015-04-06 18:19:33 -07:00
Scott Lahteine	6a860b99dc	Merge pull request #1828 from Wackerbarth/Configurator Update Configurator Files	2015-04-06 18:09:26 -07:00
AnHardt	ac843fbf3b	Fix lcd_status_message Because we now can use utf8 with up to 3 bytes per symbol, lcd_status_message[] must be 3*LCD_WIDTH wide. Filling up the message, or cutting to length, are fixed to. Fix for #1832 about at the end.	2015-04-07 02:33:34 +02:00
Scott Lahteine	6d084c017f	Fix typo in FWRETRACT handler Should be `retracting` and not `retract`	2015-04-06 17:04:22 -07:00
Edward Patel	d27c82a450	Added check for Delta printers in Mesh, #error not yet supported.	2015-04-06 23:03:06 +02:00
Edward Patel	9a093b2e8f	Added #error + mention not to enable ABL and Mesh at the same time	2015-04-06 19:38:59 +02:00
AnHardt	6ae714894e	Now the simplycistic solution. Just and only display splashscreen only once.	2015-04-06 12:43:38 +02:00
AnHardt	d521693641	Revert "Draw content in display loop only when needed" This reverts commit `bf04a92cc0`.	2015-04-06 12:31:31 +02:00
Natealus	b6f2bff461	Azteeg X3 Pro Pin fix ups	2015-04-05 23:34:56 -06:00
Scott Lahteine	d867c18535	Fix compile error with Z_DUAL_ENDSTOPS	2015-04-05 20:48:08 -07:00
Richard Wackerbarth	46474cf2f2	Incorporate @section headers from configurator	2015-04-05 22:39:40 -05:00
Richard Wackerbarth	cf66cb8808	Bring configurator up-to-date	2015-04-05 22:38:15 -05:00
Richard Miles	1a5293c2ce	Prevents MINTEMP / MAXTEMP when no heaters present This commit checks whether or not HEATER_0 is in use, and if not, skips the MIN / MAX temperature checks.	2015-04-05 22:27:14 +01:00
Edward Patel	5360158545	Merge branch 'Development-Marlin' into Development	2015-04-05 20:28:44 +02:00
AnHardt	bf04a92cc0	Draw content in display loop only when needed Example for splash screen.	2015-04-05 12:53:20 +02:00
AnHardt	9865318f1c	Disable splash-screen when done once Splash screen was shown with every display init. That means every time the menus where entered. Note the 2 in the initialisation. The buffer is already written in two steps a 512 byte. Without the 2 only the upper half is shown.	2015-04-05 12:24:01 +02:00
Scott Lahteine	53eb662908	Have the configurator read from MarlinFirmware repo	2015-04-04 20:19:17 -07:00
Edward Patel	d24ea7c03f	Added Comment in hope of github seeing these updates	2015-04-05 05:14:06 +02:00
Edward Patel	61de6ecd54	Added change to example Configuration.h's	2015-04-05 04:26:35 +02:00
Edward Patel	2f0081bbb5	Compile error fix! Fix for merge artifacts.	2015-04-05 04:16:16 +02:00
Edward Patel	0e6514e7bd	Bug fix! Missed putting z value back in right slot after zigzag mod.	2015-04-05 04:13:34 +02:00
Edward Patel	ea10601406	Merge branch 'Development-Marlin' into Development Conflicts: Marlin/Configuration.h Marlin/Marlin_main.cpp	2015-04-05 04:06:02 +02:00
Scott Lahteine	cb02bc6db4	Merge pull request #1817 from AnHardt/dogm_looptest Execute DOGM display-loop less often	2015-04-04 17:29:56 -07:00
quillford	b02a55e60f	Fixed scara directions Config said for a delta instead of for a scara	2015-04-04 15:26:35 -07:00
Scott Lahteine	6c5f07c5cb	Merge pull request #1813 from thinkyhead/fixup_probing Fix bad thermal runaway trigger	2015-04-04 14:41:43 -07:00
AnHardt	340d165a9c	Reduce display updates for dogm displays In 'if (encoderPastThreshold \|\| LCD_CLICKED)' lcdDrawUpdate was not set. 'lcd_status_update_delay'-loop was not effective in function lcd_status_screen(). The loop prevented the update of the status screen but not the displays update. Shifted the loop into lcd_update().	2015-04-04 22:02:24 +02:00
AnHardt	418d22d7b3	Revert "Testloop cleanup" This reverts commit `6361404b91`.	2015-04-04 18:33:36 +02:00
AnHardt	6361404b91	Testloop cleanup Shifted condition should still be in.	2015-04-04 17:56:13 +02:00
AnHardt	6d4b3f0d6a	Move the condition before the loop Result see: https://youtu.be/AEnBzdu9_tk Dot is moving not so fast -> less executed loops.	2015-04-04 17:49:39 +02:00
AnHardt	4cb7dfc546	Move the 'alive dot' in every displayloop Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g Loop is executed several times per display update.	2015-04-04 17:34:28 +02:00
Scott Lahteine	b0f198c153	heater_index above its use	2015-04-04 06:18:08 -07:00
Scott Lahteine	60f8e0386f	More thermal runaway states	2015-04-04 05:45:36 -07:00
Scott Lahteine	f9dbd73652	Fix tr_target_temperature type - float!	2015-04-04 05:25:53 -07:00
Scott Lahteine	c83faa9c5e	Merge pull request #1811 from thinkyhead/fixup_probing Compare indices instead of floats for probe actions	2015-04-04 05:14:59 -07:00
Scott Lahteine	61f8394361	Compare indices instead of floats for probe actions	2015-04-04 05:01:16 -07:00
Scott Lahteine	a98183b463	Merge pull request #1809 from Wackerbarth/LanguageCleanup Deferring default definition made #undef unnecessary	2015-04-04 04:37:20 -07:00
Scott Lahteine	41ded7e996	Merge pull request #1805 from thinkyhead/fixup_probing Optimize coordinate copying, fix EXTRUDER_RUNOUT_PREVENT	2015-04-04 03:49:54 -07:00
Richard Wackerbarth	4119738e69	Deferring default definition made #undef unnecessary	2015-04-04 05:48:07 -05:00
Scott Lahteine	6f06d33be5	Fix missing refresh_cmd_timeout function	2015-04-04 03:47:25 -07:00
Scott Lahteine	2d099a2c70	Fix missing backslash in macro	2015-04-04 03:35:16 -07:00
Scott Lahteine	0f9b29e6c5	Merge pull request #1803 from Natealus/Development Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro	2015-04-03 23:45:05 -07:00
Scott Lahteine	0935084141	Fix manage_inactivity - Document `manage_inactivity` function - Allow `EXTRUDER_RUNOUT_PREVENT` to work with all extruders - Use faster `memcpy` for copying coordinates	2015-04-03 23:42:50 -07:00
Scott Lahteine	c065da52ec	Spacing and spelling	2015-04-03 22:54:48 -07:00
Scott Lahteine	a3e129e091	Merge pull request #1801 from thinkyhead/fixup_probing Minor optimizations	2015-04-03 22:30:01 -07:00
Natealus	ab11f90da0	Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has a couple commented lines for switching Z_MIN_PIN if needed.	2015-04-03 23:14:03 -06:00
Scott Lahteine	8680b515b0	Fix missing tmp_extruder -> target_extruder	2015-04-03 22:12:49 -07:00
Natealus	a6ba40ae48	Compiling error temperature.cpp with multiple extruders defined It wouldn't compile because of this line in temperature.cpp it turns out it was just a stray ( that didn't line up with the previous lines so I just made it in line with the rest and it compiled fine.	2015-04-03 23:09:31 -06:00
Scott Lahteine	fc3c76fc16	Fix #1800	2015-04-03 22:04:42 -07:00
Scott Lahteine	c185912c19	Latest upstream commits, mostly	2015-04-03 21:58:48 -07:00
Scott Lahteine	1e5c18bb14	Add code_value_short and SERIAL_CHAR	2015-04-03 21:43:30 -07:00
Scott Lahteine	e0d4368cb5	Minor code cleanup, move NUM_AXIS out of config	2015-04-03 20:45:24 -07:00
Scott Lahteine	4c7af484f8	Merge pull request #1787 from thinkyhead/fixup_tr Fix: thermal_runaway_protection triggered by target temperature increase	2015-04-03 20:06:56 -07:00
Scott Lahteine	c747becec1	Merge pull request #1796 from thinkyhead/pidbed_temp_eeprom Add PIDTEMPBED to EEPROM	2015-04-03 20:03:38 -07:00
Scott Lahteine	84e4edaea7	Add M48 comment for #1794	2015-04-03 19:52:00 -07:00
Scott Lahteine	9ba55baa5b	Track target temperature separately for each heater	2015-04-03 19:42:40 -07:00
Scott Lahteine	528e32a1d4	Fix timeout in thermal_runaway when temperature is set higher	2015-04-03 19:34:55 -07:00
Scott Lahteine	b98ebd517e	disable / enable_all_steppers functions	2015-04-03 19:25:22 -07:00
Scott Lahteine	713953d8c1	Upstream commits, allow no extruder in M105	2015-04-03 19:16:38 -07:00
Scott Lahteine	8f893eb8df	Merge pull request #1798 from thinkyhead/fixup_probing Fix probe height at G28 start	2015-04-03 19:03:00 -07:00
Scott Lahteine	dde7e11f8e	Merge branch 'Development' into fixup_tr Latest upstream commits	2015-04-03 18:56:52 -07:00
Scott Lahteine	abd7fc36b6	Fix probe height at G28 start	2015-04-03 18:54:55 -07:00
Scott Lahteine	610c8c5471	Merge pull request #1795 from thinkyhead/fixup_probing Finish pin tests	2015-04-03 18:44:44 -07:00
Scott Lahteine	e4934164e4	Merge pull request #1790 from Wurstnase/fix_home_z fix feedrate for homing z	2015-04-03 18:35:09 -07:00
Scott Lahteine	a469d796e1	Add cleanups needed for #1772	2015-04-03 18:14:57 -07:00
Scott Lahteine	c0ca26cd50	Merge branch 'Development' into fixup_probing Latest upstream commits	2015-04-03 18:05:17 -07:00
Scott Lahteine	5c1f08a35f	Merge pull request #1772 from croadfeldt/Merge_cleanup Z_PROBE_ENDSTOP	2015-04-03 18:04:31 -07:00
Scott Lahteine	db7b0ea0cf	Merge pull request #1569 from Wackerbarth/Development Incorporating Build Numbers	2015-04-03 16:56:31 -07:00
Scott Lahteine	92119d0f7d	Static delta[] for SCARA	2015-04-03 16:46:56 -07:00
Scott Lahteine	007a4bd421	Adjust spacing in view function	2015-04-03 16:41:58 -07:00
Scott Lahteine	424d5495e4	Add PIDTEMPBED to EEPROM	2015-04-03 16:38:05 -07:00
Scott Lahteine	6b919e14c1	Group all universal variables	2015-04-03 15:45:41 -07:00
Scott Lahteine	21cd2e4fae	Merge branch 'Development' into fixup_probing Latest upstream commits	2015-04-03 15:32:15 -07:00
Scott Lahteine	0e8182bbf2	Additional pin tests, cleanup	2015-04-03 15:31:35 -07:00
Wurstnase	45565b680d	second wrong feedrate	2015-04-03 18:01:28 +02:00
Wurstnase	581b2aae04	fix feedrate for homing z max_feedrate is in mm/s. line_to_destination needs a feedrate in mm/min because there is feedrate/60.	2015-04-03 16:11:32 +02:00
Edward Patel	48b1c3822f	Merge branch 'Development-Marlin' into Development	2015-04-03 00:46:30 +02:00
Richard Wackerbarth	ccdaea51ba	Add KosselPro	2015-04-02 09:20:24 -05:00
Richard Wackerbarth	f4599143eb	Allow M115 to better reflect the build	2015-04-02 09:20:24 -05:00
Richard Wackerbarth	34c7d45879	Hook for Auto-generated Build Version The automatic versioning system extracts a build version number from the SCM system That versioning information is written to the file _Version.h, a file that is NOT preserved in the SCM. If such a file will be present, we include it here to utilize the parameters that are defined therein.	2015-04-02 09:20:24 -05:00
Scott Lahteine	c756b4cf07	Comment tweak	2015-04-02 06:11:03 -07:00
AnHardt	23cd54755f	Fix typo in Marlin_main.cpp related to current_position[Z_AXIS] and retract_zlift. '+ =' -> '+=' Fix for #1786	2015-04-02 14:50:31 +02:00
Scott Lahteine	e96df67630	Clarify thermal_runaway_protection - Add comments documenting `thermal_runaway_protection` - Add an enum for the thermal runaway states - Add macros for temperature helper functions - Fix a glitch with the z probe sled in homeaxis	2015-04-02 05:10:14 -07:00
Chris Roadfeldt	0afe6696f0	Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup	2015-04-01 19:31:20 -05:00
Chris Roadfeldt	59994bd519	Not doing network admin work, pin not ping... :)	2015-04-01 19:24:42 -05:00
Chris Roadfeldt	916f59e35f	Spaces not tabs in language.h. Catch unlikely but possible error and head crash when using Z_PROBE_REPEATABILITY_TEST	2015-04-01 19:22:05 -05:00
Scott Lahteine	66b3b53e76	Merge pull request #1762 from AnHardt/MiMa Fix MIN&MAX temperatures again	2015-04-01 16:52:07 -07:00
Edward Patel	6b91b7b411	Mesh bed leveling: Added G29 S3 + finer steps in manual probing. * Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually * Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h	2015-04-01 21:18:51 +02:00
Chris Roadfeldt	26dc80bf2d	Typo fixed...	2015-04-01 13:47:17 -05:00
Chris Roadfeldt	2966ae2022	Fix Z_PROBE_PING not declared, allows code to compile if Z_PROBE_ENDSTOP is not used.	2015-04-01 13:32:25 -05:00
Wurstnase	67d5e7973e	old bump_divisor for cartesian/corexy-printer some people are starting to ask why homing is so slow. this is the old standard hard-coded value.	2015-04-01 20:17:49 +02:00
Chris Roadfeldt	bb41edc2ef	Fixed extra #endif	2015-04-01 12:13:25 -05:00
Chris Roadfeldt	a57862e29f	Cleaning up code in prep for merge with upstream.	2015-04-01 11:40:24 -05:00
Chris Roadfeldt	745d9fe1a4	Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup Conflicts: Marlin/Marlin_main.cpp	2015-04-01 10:31:02 -05:00
AnHardt	488666832b	Remove the previously introduced ()	2015-04-01 13:40:05 +02:00
Scott Lahteine	443468df8d	Merge pull request #1771 from AnHardt/iss1770 Added new - changed entries from Fix up LCD_PROGRESS_BAR	2015-04-01 02:13:30 -07:00
Scott Lahteine	9593f09b99	Merge pull request #1764 from thinkyhead/probe_leveling Fix homing and leveling	2015-04-01 02:00:39 -07:00
Scott Lahteine	72c7de3570	Cleanup M48	2015-04-01 01:48:45 -07:00
Scott Lahteine	97a258b0b0	Clean up, document home_axis	2015-04-01 01:44:13 -07:00
AnHardt	831016b09f	Added new - changed entries from Fix up LCD_PROGRESS_BAR for when no LCD is defined. Fix for #1770.	2015-04-01 10:17:17 +02:00
Chris Roadfeldt	a508d835db	Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP. Updated documentation in Configuration.h. Cleaned up and commented some code relating to Z_PROBE_ENDSTOP. Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.	2015-04-01 02:14:55 -05:00
Chris Roadfeldt	fdb4ddbdea	Merge remote-tracking branch 'MarlinFirmware/Development' into Development	2015-04-01 00:52:08 -05:00
atfield90	d273c90d53	Added support for Atmega 1281 chip	2015-04-01 05:15:27 +02:00
Scott Lahteine	1c7391717e	Include sync_plan_position_delta for SCARA also	2015-03-31 19:58:03 -07:00
Scott Lahteine	8231fb166d	Merge pull request #1758 from AnHardt/MENU_MULTIPLIER_ITEM Fix: Audio feedback for MENU_MILTIPLIER_ITEM click	2015-03-31 19:29:48 -07:00
Scott Lahteine	0b57a2ab8b	Merge pull request #1757 from bq/Translation-strings Added new trasnslatable labels.	2015-03-31 18:56:25 -07:00
Scott Lahteine	18bb6be80e	Fix homing and leveling - Include the current Z when raising the axis after and between probing - Add `sync_plan_position_delta` for parity with `sync_plan_position` - Clean up and clarify `M48`, `dock_sled`, and others	2015-03-31 18:52:19 -07:00
AnHardt	3f2e863206	Improve conditions for HAS_TEMP and use them in temperuture.h Flattened the if structure - the preprocessor is doing the work - not the Arduino. Arduino.	2015-04-01 02:56:14 +02:00
AnHardt	85f8a26ba4	Fix MIN&MAX temperatures again replaced GE0 with th matching GEX in the second row. added some ()	2015-04-01 00:48:04 +02:00

... 14 15 16 17 18 ...

3771 commits