Scott Lahteine
e113740fa3
Specify that Z_PROBE_*_HEIGHT is nozzle-relative
2016-08-07 17:54:17 -07:00
Scott Lahteine
7e2bd9a233
Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT
2016-08-03 21:18:38 -07:00
esenapaj
657ef8aded
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
...
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
2016-07-30 20:32:57 +09:00
Scott Lahteine
9e21b2e51d
Merge pull request #4455 from AnHardt/double-bump-feature
...
double bump probing as a feature
2016-07-29 20:00:10 -07:00
AnHardt
7188ce0ad6
double bump probing as a feature
...
Why double touch probing is not a good thing.
It's widely believed we can get better __probing__ results when using a double touch when probing.
Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.
Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.
What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.
So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)
What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
2016-07-30 03:00:49 +02:00
Scott Lahteine
c31f56a38c
Deprecate EXTRUDER_WATTS and BED_WATTS
2016-07-29 17:34:14 -07:00
Scott Lahteine
ea5ac94804
Improved MANUAL_[XYZ]_HOME_POS
...
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
2016-07-28 19:51:48 -07:00
Scott Lahteine
8953e3e984
Allow Z_SAFE_HOMING without a probe
2016-07-27 04:33:56 -07:00
Scott Lahteine
24a1a16e5d
Move versioning to MarlinConfig.h
2016-07-26 12:37:14 -07:00
Scott Lahteine
277899c175
Move include _Bootscreen.h where needed
2016-07-26 12:37:13 -07:00
Scott Lahteine
83c4653c71
Include boards and macros ahead of configs
2016-07-26 12:19:50 -07:00
Scott Lahteine
c6226bb0aa
Unify config in a single include without nested includes
2016-07-25 23:04:19 -07:00
Scott Lahteine
2d378fac1b
No need to include thermistortables.h in Configuration.h
2016-07-25 22:43:50 -07:00
Scott Lahteine
bb9da6ebdd
Document DEBUG_LEVELING_FEATURE
2016-07-22 23:37:41 -07:00
Scott Lahteine
194d9521c3
Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe
...
Unify run_z_probe
2016-07-19 19:02:39 -07:00
Scott Lahteine
4a6ed5e221
Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST
2016-07-19 18:42:48 -07:00
AnHardt
09a3cc33e6
Unify run_z_probe
...
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
2016-07-19 18:42:48 -07:00
Scott Lahteine
e44b37cdc2
motion section marker below homing speeds
2016-07-19 17:31:58 -07:00
Scott Lahteine
204fd6ec44
Set homing feedrates individually
2016-07-19 17:31:58 -07:00
Scott Lahteine
6abf916575
Reprapworld Keypad move step is 1mm
2016-07-19 16:40:39 -07:00
João Brázio
b869fbc05e
Update all config files with the new G12 options
2016-07-19 15:07:03 -07:00
Scott Lahteine
81e01152bb
Merge pull request #4336 from thinkyhead/rc_bltouch_sensor
...
BLTouch probe sensor
2016-07-17 14:06:32 -07:00
Scott Lahteine
1583177ef4
BLTOUCH probe config option
2016-07-17 13:55:38 -07:00
Scott Lahteine
39706f3e57
Endstop invert flags as macros instead of const bool
2016-07-17 13:51:02 -07:00
Scott Lahteine
671634bf11
Fix spacing after section header
2016-07-17 13:35:21 -07:00
Scott Lahteine
22b4cff423
New extruder type configuration options
2016-07-17 00:13:56 -07:00
Scott Lahteine
bf16ae5a70
Merge pull request #4299 from jbrazio/feature/g27-park-nozzle
...
Implements park nozzle feature
2016-07-16 23:47:12 -07:00
João Brázio
dfa1c45075
Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive
2016-07-17 01:15:17 +01:00
João Brázio
9a00108cb6
Adds the WEBSITE_URL as the boot screen line 2
2016-07-16 12:24:37 +01:00
João Brázio
336481ea81
Added G27 configuration options to all configs
2016-07-16 12:07:59 +01:00
João Brázio
68c343a09a
Added G12 configuration options to all configs
2016-07-14 00:38:42 +01:00
Scott Lahteine
a8b6b6a128
Merge pull request #4252 from thinkyhead/rc_rename_hpb
...
Replace PLA/ABS preheating with generic
2016-07-12 20:00:33 -07:00
Scott Lahteine
928ff6487a
Greek language pack from @psavva
2016-07-10 18:59:04 -07:00
Scott Lahteine
182c8d7f8f
Dyze High Temp Thermistor Support
2016-07-10 17:59:05 -07:00
Scott Lahteine
1026e5b071
Replace PLA/ABS preheating with generic
2016-07-09 18:06:51 -07:00
Petr Zahradnik
e282d69f63
Print job timer comment changed
2016-07-09 17:57:54 -07:00
AnHardt
5126cce7fd
Move Allen Key probe move scripts to their own functions
...
There was an hidden extra move after the scripts. This is configurable now.
Added the extra moves to the relevant configs.
2016-07-06 03:46:40 +02:00
Scott Lahteine
683975cf90
Fix spelling in a config comment
2016-06-28 16:49:13 -07:00
Scott Lahteine
10da7ac86c
Combine Z raise before/after options
2016-06-26 13:56:30 -07:00
Scott Lahteine
03c70c1990
SERVO_DEACTIVATION_DELAY => SERVO_DELAY
2016-06-23 14:33:29 -07:00
Scott Lahteine
bd01592816
Goodbye MECHANICAL_PROBE
2016-06-22 17:13:33 -07:00
Scott Lahteine
b590a7dee0
Make Z_RAISE_BETWEEN_PROBINGS a more general option
2016-06-22 14:00:44 -07:00
Scott Lahteine
d50539583a
Make XY_PROBE_SPEED a general probe option
2016-06-22 03:04:47 -07:00
Scott Lahteine
2798499b71
XY_TRAVEL_SPEED => XY_PROBE_SPEED
2016-06-22 02:45:25 -07:00
Scott Lahteine
b0e47608e6
Merge pull request #4108 from esenapaj/Fix-for-PR-#4093
...
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
2016-06-21 18:12:08 -07:00
esenapaj
d583ea852d
Standardize format description of Panel
2016-06-21 20:51:27 +09:00
esenapaj
aa6d35bd49
Move code block of probe to appropriate position
2016-06-21 20:36:46 +09:00
esenapaj
f77f3ffa70
Remove duplicated Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX
2016-06-21 19:33:45 +09:00
Scott Lahteine
19fe93a5a9
Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST
2016-06-21 03:10:46 -07:00
Scott Lahteine
3996242e9d
Allow Z_MIN_PROBE_REPEATABILITY_TEST solo
2016-06-21 01:56:40 -07:00
Scott Lahteine
9beb3f2f5e
Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
...
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:46:14 -07:00
Scott Lahteine
f215b30932
Merge pull request #4093 from thinkyhead/rc_probe_without_abl
...
Make Z Probe options independent of ABL
2016-06-19 19:44:25 -07:00
Scott Lahteine
dfbf8b3c2c
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:25:26 -07:00
Scott Lahteine
de12228758
Make Z Probe options independent of ABL
2016-06-19 18:47:27 -07:00
Scott Lahteine
f8c278ce4d
Cartesio UI display option in all configs
2016-06-19 17:39:46 -07:00
Scott Lahteine
bd4ec727e7
Merge pull request #4066 from thinkyhead/rc_M851_with_probe
...
Make M851 standard with a bed probe
2016-06-17 17:32:55 -07:00
Scott Lahteine
fc56a547d1
Rename movement section to motion
2016-06-17 15:19:43 -07:00
Scott Lahteine
1000563d80
Make M851 standard with a bed probe
2016-06-17 15:19:42 -07:00
Scott Lahteine
47ce810f52
Remove support for XY servo endstops
2016-06-17 14:19:17 -07:00
Scott Lahteine
02e5dad29a
Include Croatian in language listings
2016-06-16 16:18:26 -07:00
João Brázio
8ccd97e7cc
Updated all example configuration files
2016-06-12 00:36:15 +01:00
Reid Rankin
16212432c9
G20/21 and M149 support, and code_value() refactor
...
This is an update of MarlinDev PR #196 .
G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.
In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
2016-06-08 16:51:10 -07:00
Scott Lahteine
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-03 17:38:03 -07:00
Scott Lahteine
db0fd021d0
Z raise options independent of ABL so G28 can use them
2016-06-02 16:56:49 -07:00
Scott Lahteine
28fb1f8994
Tweak #endif comment for ABL GRID
2016-06-02 16:56:49 -07:00
Scott Lahteine
2bd4f33369
Merge pull request #3928 from thinkyhead/rc_allen_key_cleanup
...
Remove excess allen key probe examples from configs
2016-05-31 19:18:21 -07:00
Scott Lahteine
a0b000d752
Support for SAV_3DGLCD OLED LCD controller
2016-05-31 14:41:16 -07:00
Scott Lahteine
43a71ef226
Remove excess allen key probe examples from configs
2016-05-30 18:26:53 -07:00
Edward Patel
92a27c37b3
MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations
2016-05-30 09:50:11 +02:00
Scott Lahteine
fe3122774a
Merge pull request #3806 from thinkyhead/rc_coreyz_support
...
Support for COREYZ. Fixes for COREXY, COREXZ
2016-05-26 18:50:43 -07:00
Scott Lahteine
89e630b2fb
Merge pull request #3808 from thinkyhead/rc_singlenozzle
...
SINGLENOZZLE
2016-05-23 15:52:19 -07:00
Scott Lahteine
95fee8ca81
Add option for CoreYZ kinematics
2016-05-23 13:58:40 -07:00
Scott Lahteine
c5130fd23b
Additional instructions for controller reverse options
2016-05-20 18:14:50 -07:00
Scott Lahteine
69abfef82e
Add "SINGLENOZZLE" extruder option
2016-05-20 15:45:11 -07:00
Scott Lahteine
1a6c72cb57
Apply to the rest of the configs
2016-05-20 11:52:27 -07:00
João Brázio
f9a62f6a8e
Added PRINTJOB_TIMER_AUTOSTART section to example config files
2016-05-14 15:22:45 -07:00
Scott Lahteine
f13c4a9ec4
Merge pull request #3720 from jbrazio/feature/host-keepalive
...
Removes the DISABLE from HOST_KEEPALIVE
2016-05-14 14:39:31 -07:00
Scott Lahteine
14cd0f4c92
Merge pull request #3740 from thinkyhead/rc_lcd_home_options
...
Individual Axis Homing LCD menu items
2016-05-12 11:59:46 -07:00
João Brázio
09150cae79
Individual Axis Homing LCD menu items
2016-05-11 19:28:19 -07:00
Scott Lahteine
4dc4e2063f
Add REVERSE_ENCODER_DIRECTION option
2016-05-11 15:39:28 -07:00
João Brázio
85b2c80838
Updated example configurations
2016-05-11 01:45:49 +01:00
João Brázio
5373ac6373
Updated example configurations
2016-05-10 13:42:00 +01:00
esenapaj
212b17d510
Fix for PR #3526(Configuration.h LCD & SDCard s...
...
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)
It removes duplicated BQ_LCD_SMART_CONTROLLER.
2016-05-03 21:35:02 +09:00
esenapaj
2fa4bc344c
Some clean-up for example configuration files
...
Some clean-up for example configuration files
Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)
Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h
Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing
Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
2016-05-02 21:16:00 +09:00
Scott Lahteine
c3ef9993b9
Merge pull request #3625 from jbrazio/feature/print-counter
...
Print job statistics
2016-04-29 15:31:14 -07:00
João Brázio
e34f4653ef
Fixed a typo on the configuration files
2016-04-29 23:13:59 +01:00
João Brázio
27088e356f
Updated example configuration files
2016-04-29 23:13:59 +01:00
Scott Lahteine
924285afa6
Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc
...
Correct the REVERSE_MENU_DIRECTION comment
2016-04-28 20:28:46 -07:00
Scott Lahteine
f1b00eb12b
Correct the REVERSE_MENU_DIRECTION comment
2016-04-28 20:27:17 -07:00
Scott Lahteine
0c11566f42
Replace LANGUAGE_INCLUDE with LCD_LANGUAGE
2016-04-27 20:06:40 -07:00
Scott Lahteine
259794c0be
Make DISPLAY_CHARSET_HD44780 a single setting
2016-04-27 20:06:40 -07:00
João Brázio
7de0161204
Updated example config files
2016-04-24 05:21:17 +01:00
Scott Lahteine
0c2aa92b07
Z Safe Homing for all
...
The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so
make it available for general use.
2016-04-20 17:04:52 -07:00
Scott Lahteine
f2558b1f2c
Additional delta config updates
2016-04-17 20:04:52 -07:00
Scott Lahteine
339b5b3e34
Patch more configs with new changes
2016-04-16 19:35:02 -07:00
Scott Lahteine
a8e4d7c135
Merge pull request #3477 from alephobjects/BedTempHysteresis
...
Implementation of M190 bed temp hysteresis
2016-04-15 16:20:58 -07:00
Scott Lahteine
1cc622b167
Fix minor spelling in comments
2016-04-14 20:06:59 -07:00
Scott Lahteine
de8c0baf8b
Update some comments in Configuration.h
2016-04-14 16:41:20 -07:00
gralco
69c00aea4c
Include bed hysteresis setting in the example configs
2016-04-14 08:03:38 -06:00
Scott Lahteine
f8e10ff1d8
Merge pull request #3491 from thinkyhead/rc_mechanical_probe
...
Support for "mechanical probe" with Allen Key as a special case
2016-04-13 20:55:14 -07:00
