zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
19445 commits 1 branch 0 tags 156 MiB
Commit graph

938 commits

Author SHA1 Message Date
Keith Bennett 5823ebb446
Assisted Tramming requires a probe (#18912) 2020-08-03 22:39:29 -05:00
Victor Oliveira 38ce5966e1
SPI Emulated DOGM (like FSMC_GRAPHICAL_TFT, but SPI) (#18817) 2020-07-29 21:25:07 -05:00
lethalwallabies fc95946380
Typo fix (#18856) 2020-07-29 14:49:07 -05:00
InsanityAutomation c5ec80d6c7
G425/G35 menu items; G425 pre- and post- scripts (#18737) 2020-07-24 23:31:15 -05:00
InsanityAutomation 2c61e6ba28
Add CONTROLLER_FAN_IGNORE_Z (#18735) 2020-07-23 21:27:40 -05:00
Diego von Deschwanden 42fbd527f3
Fix links to secure sites (#18745) 2020-07-22 22:20:14 -05:00
cr20-123 a3795e3e48
Prettier BLTouch menu items (#18682) 2020-07-18 17:41:47 -05:00
George Fu bd0430dc38
Support FT81050 with FYSETC F6 (#18678) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2020-07-17 07:40:28 -05:00
Evgeny Z 1d6868852b
Chopper Timing Preset for 24V 0.9° (#18662) 2020-07-16 21:40:56 -05:00
Scott Lahteine 2d33a9fd7c Add REPORT_FAN_CHANGE as an option 2020-07-14 21:15:14 -05:00
Scott Lahteine 4457b9d5d2 Clarify MICROSTEP_MODES 2020-07-12 03:20:06 -05:00
Scott Lahteine b6051efe5b Capitalize "G-code" 2020-07-10 01:35:37 -05:00
cccc b64113411c
Add current offset for POWER_MONITOR sensor (#18600) 2020-07-09 22:43:04 -05:00
Scott Lahteine abc5c93986 Clean up some MMU comments 2020-07-09 02:13:32 -05:00
Scott Lahteine 8a55f9405c Fix some comments 2020-07-08 06:53:03 -05:00
notabucketofspam 588d40aedf
Fix typo in Configuration_adv.h (#18570) 2020-07-07 12:55:01 +01:00
cbteeple 2c15a787c7
Option to set manual Babystepping distance in mm (#18503) 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
 2020-07-03 09:24:41 -05:00
Scott Lahteine a907e15ae6 Allow larger ADC debounce 
Reference #17205
 2020-06-26 19:31:07 -05:00
Fabio Santos 25c7c43a82
Add SERIAL_FLOAT_PRECISION option (#18367) 2020-06-22 21:12:45 -05:00
Rui Caridade ac50a355a3
G35: Bed tramming assistant (#16897) 2020-06-21 04:27:51 -05:00
Scott Lahteine 424569b4c4
Power monitor and display (#17437) 2020-06-18 15:23:03 -05:00
Scott Lahteine caeba33d28 Sensor 502 and PTC cleanup 2020-06-16 14:08:51 -05:00
Scott Lahteine aea60d9450 Clean up trailing spaces 2020-06-15 18:11:32 -05:00
rudihorn 3bf990ec34
PTC: Extend options, fix probing bugs (#18253) 2020-06-10 18:25:17 -05:00
Scott Lahteine 75119c433a Default filament 1.75mm 2020-06-09 23:20:20 -05:00
MoellerDi bac760207c
Add volumetric extrusion limit (#17017) 2020-06-08 03:24:46 -05:00
Luu Lac eda2fd8dbe
Improvements for Laser / Spindle (#17661) 2020-06-08 00:47:31 -05:00
ellensp ce62209bce
Probe margin. Bump config version (#18140) 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
 2020-06-02 20:41:50 -05:00
Leandro A. F. Pereira 801f99edad
SDCARD_READONLY (#17884) 2020-05-30 23:59:29 -05:00
Scott Lahteine 31eb487da5 whitespace 2020-05-22 02:02:11 -05:00
Mobilinkd LLC 60bed3434b
Ignore spurious MAX31855K / 6675 thermocouple errors (#18039) 2020-05-20 15:38:29 -05:00
thisiskeithb 1e32df4c75
Fix Hotend Idle Timeout comment (#18032) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2020-05-19 02:34:15 -05:00
Italo Soares 213d4b890e
Hotend Idle Timeout (#16362) 2020-05-18 00:50:35 -05:00
Bastien R 2ec482a102
MMU2 Extruder Sensor support (#17886) 2020-05-17 14:52:45 -05:00
thisiskeithb 5a92462c0f
Less ambiguous option comment (#17983) 2020-05-13 14:26:27 -05:00
Gustavo Alvarez 6d92f56582
FTDI/EVE, pins cleanup for SKR E3/DIP (#17990) 2020-05-13 14:22:03 -05:00
Scott Lahteine 27beade888 Update EP comment 2020-05-12 16:32:40 -05:00
RudolphRiedel 98fdc67f1d
Fixes for FYSETC Cheetah (#17935) 2020-05-11 23:51:07 -05:00
Scott Lahteine df9cad6a53 Correct DEFAULT_MINSEGMENTTIME units 2020-05-11 22:15:25 -05:00
Colin Godsey 8a22ef0c83
G6 Direct Stepping (#17853) 2020-05-11 19:22:41 -05:00
thisiskeithb 2f3077f219
Tests (LPC176x): Emergency Parser (#17967) 2020-05-11 19:14:06 -05:00
Gurmeet Athwal a4c981469e
Extended reporting options (#16741) 2020-05-05 23:34:04 -05:00
Scott Lahteine 9ce950e3c1 Move M114 options down 2020-05-05 20:15:48 -05:00
Gustavo Alvarez 3fd8ef52c5
More FTDI EVE fixes (RAMPS, Cheetah) (#17759) 2020-05-05 02:38:06 -05:00
Scott Lahteine d2b7671253 No Z stall by default 2020-05-05 00:59:39 -05:00
Scott Lahteine 9a6934874a Add XYZ_NO_FRAME option 2020-05-03 01:24:39 -05:00
Neil van Geffen 7c3909bc3f
Save/Load distinct TMC SG thresholds (#17741) 2020-04-28 01:22:03 -05:00
studiodyne 89b17b5463
Followup fixes for singlenozzle, etc. (#17712) 2020-04-28 00:21:23 -05:00
RudolphRiedel 0b3a96412c
Fixes for ExtUI / EVE (#17726) 2020-04-27 10:14:42 -05:00
studiodyne 5ae45bab18
Adjustable XY_FREQUENCY_LIMIT (#17583) 2020-04-27 05:59:52 -05:00
Toni 21067ab062
Add Prusa MMU2S settings - beta (#17523) 2020-04-25 21:07:21 -05:00
Scott Lahteine 3a27933ae7
Fixes for FYSETC Touch EVE 5" on AVR (#17659) 
Co-Authored-By: RudolphRiedel <rudolphriedel@users.noreply.github.com>
Co-authored-by: sL1pKn07 <sl1pkn07@gmail.com>
 2020-04-24 22:35:46 -05:00
studiodyne 2f6262c27b
Automatic Tool Migration feature (#17248) 2020-04-22 21:03:28 -05:00
Scott Lahteine e222ba4c81 Prevent DUE / Spindle conflict 
Fixes #17449
 2020-04-22 18:54:13 -05:00
Scott Lahteine 8a9c14ea1d Remove obsolete comment 2020-04-22 14:55:33 -05:00
Scott Lahteine c3946dd017 Add a warning on LA + S-Curve 2020-04-21 18:39:43 -05:00
Scott Lahteine 000ec9fc13 Ensure language.h include order 
See #17604
 2020-04-20 09:43:48 -05:00
Fabio Santos ccfd5c1010
Trinamic steppers Homing Phase (#17299) 2020-04-20 08:08:00 -05:00
Scott Lahteine b420fdaa87 Digipots followup 2020-04-18 23:36:34 -05:00
grauerfuchs 4a5a3d27ed
Option to use raw digipot values (#17536) 2020-04-18 22:56:23 -05:00
George Fu a794538c54 Homing backoff enhancements 
- Define homing bump as an array
- Add pre and post homing backoff options
- Consolidate homing config options
 2020-04-17 08:52:41 -05:00
Scott Lahteine 880f73d471 Minor cleanup 2020-04-17 04:35:00 -05:00
studiodyne 9110f756ad
AUTOTEMP default proportions (#17560) 2020-04-16 19:03:53 -05:00
Zs.Antal 78a5079558
Add Hungarian language (#17491) 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
 2020-04-16 04:11:42 -05:00
Scott Lahteine 03020dd31e Use the common pattern for auto fan pins 
Now that pins.h is guaranteed included after configs.
 2020-04-16 03:31:44 -05:00
George Fu e990a98404
FYSETC TFT81050 LCD support (#17568) 2020-04-15 23:34:48 -05:00
Scott Lahteine e6ccec17a6 Expose SD_PROCEDURE_DEPTH in config 2020-04-13 14:54:50 -05:00
Scott Lahteine e3321920f3 Update Marlin website links to https 2020-04-12 17:21:14 -05:00
Scott Lahteine 7aed32df00 Fix SD_FINISHED_RELEASECOMMAND bug 
Fixes #17401 bug that was introduced in 8f26c3a
 2020-04-11 22:08:37 -05:00
Scott Lahteine d6badb77a4 Clean up whitespace 2020-04-08 14:04:51 -05:00
Tor-p d6f39a69af
Fix G76 probe height / position (#17392) 2020-04-06 15:32:06 -05:00
Ben df8b7dfc40
Various Laser / Spindle improvements (#15335) 2020-04-02 19:31:08 -05:00
Scott Lahteine 747b964295
Clean up user-wait, SD completion (#17315) 2020-03-28 03:18:53 -05:00
Erkan Colak 83eec683c9
New Controller Fan options and M710 gcode (#17149) 2020-03-18 13:41:12 -05:00
InsanityAutomation 775a4294fc
Configurable SLOWDOWN divisor (#17171) 2020-03-15 18:29:18 -05:00
Scott Lahteine 41ffe9851d Fix LCD progress bar 
Fixes #17162
 2020-03-14 19:24:33 -05:00
Scott Lahteine 8b2d55e345 Config version 020005 2020-03-13 23:22:46 -05:00
Scott Lahteine 59cb1466b7 Fix DUGS / DGUS typo 2020-03-12 19:30:18 -05:00
George Fu 201c991cfa
Fix and update DGUS displays (#17072) 2020-03-11 03:40:30 -05:00
jufimu12 627aa8db2d
Fix G34, add HOME_AFTER_G34 option (#17108) 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
 2020-03-10 20:00:26 -05:00
Scott Lahteine 8f66dbfcd5
SD_DETECT_INVERTED => SD_DETECT_STATE (#17112) 2020-03-10 15:43:06 -05:00
Scott Lahteine 0f39386d9b Make BOOTSCREEN_TIMEOUT generally available 2020-03-09 17:46:49 -05:00
Scott Lahteine 7674befa47 DOGM SPI delay is less common 2020-03-09 17:46:49 -05:00
Scott Lahteine 64d092935b
More useful ENABLED / DISABLED macros (#17054) 2020-03-07 22:20:41 -06:00
Scott Lahteine 20f93404a7 Add / correct comments 2020-03-07 02:16:17 -06:00
Scott Lahteine 0578e9b16e Move SENSORLESS_PROBING to the probes section 
Fixes a bug with HAS_BED_PROBE not being set before use.
 2020-03-05 11:05:11 -06:00
thisiskeithb efc739a880
Use BED_MAXTEMP for PTC_MAX_BED_TEMP (#17061) 2020-03-03 14:22:28 -06:00
Scott Lahteine 3a07b4412d
Asynchronous M114 and (R)ealtime position option (#17032) 2020-03-02 21:52:53 -06:00
InsanityAutomation 552f7a91d0
Default on/off for Power Loss Recovery (#17051) 2020-03-02 16:07:53 -06:00
Scott Lahteine b1a50d54e2 HAS_TRINAMIC => HAS_TRINAMIC_CONFIG 2020-03-02 12:04:36 -06:00
Scott Lahteine 832951ec44
Case-insensitive g-code option (#16932) 2020-02-26 09:23:55 -06:00
Scott Lahteine 5b438fb20d HAS_SDCARD_CONNECTION is more obsolete 2020-02-25 22:30:30 -06:00
InsanityAutomation 3e685777a8
Fix LCD cutter/bed icons overlapping (#16956) 2020-02-25 03:07:36 -06:00
InsanityAutomation 3a6f776c4b
Update POWER_LOSS_PIN comment (#16957) 2020-02-24 23:51:10 -06:00
Scott Lahteine 64a81f887a
EXPERIMENTAL integrated BABYSTEPPING (#16829) 2020-02-15 21:42:28 -06:00
George Fu 63dd0f249d
Fysetc S6 pins / LCD updates (#16830) 2020-02-14 07:18:57 -06:00
Scott Lahteine 3bef7a4450
Add g-code quoted strings, improve stream code (#16818) 2020-02-10 14:52:15 -06:00
Scott Lahteine 18a7276909 Revert "Coolstep for TMC2130, 2209, 5130, 5160" 
Reverting #16790 as not ready for primetime.
 2020-02-09 21:22:26 -06:00
InsanityAutomation cc1ff27256 Bump config version to 020004 (#16816) 2020-02-09 12:15:02 -06:00
Fabio Santos 894762259b
Coolstep for TMC2130, 2209, 5130, 5160 (#16790) 2020-02-08 21:01:57 -06:00
Scott Lahteine 793939a365 Upgrade an ifdef 2020-02-04 08:46:37 -06:00
Scott Lahteine 7bf2190f03 Fix CALIBRATION_GCODE pin handling 2020-02-04 08:32:43 -06:00
felixstorm 38a9706e16
Keep secure credentials in a separate config file (#16773) 2020-02-03 23:29:01 -06:00
Scott Lahteine bfad23d3e2 (c) 2020 2020-02-03 08:00:57 -06:00
InsanityAutomation e58d1bf974
G34 automatic point assignment (#16473) 2020-02-01 04:50:44 -06:00
Scott Lahteine e8ed4329ea Cleanup of old includes, add comments 2020-01-29 22:41:18 -06:00
Hans007a e2eef1256a G60/G61 Position Save/Restore (#16557) 2020-01-26 23:19:05 -06:00
Scott Lahteine 1d1dc8e339 More 8 extruder defines 2020-01-26 03:24:54 -06:00
Scott Lahteine 86c18ea6e0 Bring configs and drivers.h up to date 2020-01-24 23:17:52 -06:00
Ryan b7f86bffd5 Arc segment radius scaling (#16551) 2020-01-21 02:53:26 -06:00
InsanityAutomation 79810b7fcb G12 defaults per tool. Event G-code for post-toolchange (#16554) 2020-01-21 02:51:23 -06:00
Scott Lahteine 84c874c53b Tweak some config spacing 2020-01-21 02:43:34 -06:00
0r31 b57ef4b261 Override for LPC1768 u8g/digipot I2C master ID (#16622) 2020-01-20 20:09:16 -06:00
InsanityAutomation 0fcf2b1110 Quad Z stepper support (#16277) 2020-01-19 23:35:07 -06:00
tompe-proj a338dce83f PINDA v2 temperature sensor / compensation (#16293) 2020-01-17 17:16:45 -06:00
Dennis 2d7f94cae1 Adjustable ADC debounce delay (#16264) 2020-01-15 18:06:03 -06:00
gjdodd 7481563bd9 Nikon IR support for time lapse photos (#16539) 2020-01-15 17:59:41 -06:00
Scott Lahteine ea7363a8f4 Update more configs 2020-01-14 18:48:29 -06:00
Bob Kuhn 1ad53cee1f Improved STMicro L64XX stepper driver support (#16452) 2020-01-13 18:47:30 -06:00
Luc d854c8fa5f ESP3d integration for ESP32 (#16515) 2020-01-10 17:22:41 -06:00
Jamie 36d08f8ad3 Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs (#16510) 2020-01-09 04:48:00 -06:00
Jamie 9b970cf12f Add option to invert joystick axes (#16466) 2020-01-05 02:01:05 -06:00
George Fu e593da1c23 Update and fix DGUS (#16317) 2020-01-03 21:00:44 -06:00
rado79 0be8b22d3c Add FILAMENT_UNLOAD_PURGE_FEEDRATE (#16372) 2020-01-01 21:56:58 -06:00
Scott Lahteine 00c83e9ca6 Update comments re: NOZZLE_AS_PROBE 2020-01-01 19:41:23 -06:00
Scott Lahteine b49a0e39d5 HOME_USING_SPREADCYCLE is obsolete 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2019-12-19 16:02:57 -06:00
Scott Lahteine 53f77dfadf Remove obsolete TMC2209 comment 2019-12-19 15:56:52 -06:00
Jason Smith 1bad8f1b17 Improve pulse timing and step reliability (#16128) 2019-12-19 02:38:48 -06:00
Moshi Binyamini dcdaa2025f Sanity-check Z_STEPPER_AUTO_ALIGN coordinates (#16231) 2019-12-19 00:59:01 -06:00
Scott Lahteine 303ddb862a Tweak some config names 2019-12-12 22:18:04 -06:00
haschtl ff6518c0a8 Add PID_FAN_SCALING option (#15585) 2019-11-26 03:34:43 -06:00
Scott Lahteine 441e822fb3 LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE 2019-11-23 17:04:17 -06:00
BigTreeTech ab8b24fdba Power Loss Recovery with a UPS (#15943) 2019-11-20 17:40:21 -06:00
Scott Lahteine aa93e1f21a Update TMC_ADV examples 2019-11-15 02:15:10 -06:00
Roman Moravčík e110f5abce M73 R : Set Remaining Time (#15549) 2019-11-12 19:36:54 -06:00
Scott Lahteine 5e5045c4ee Touch UI finishing touches 2019-11-10 18:52:53 -06:00
danym21 28e1614c2e Add Sensorless Homing current (#15690) 2019-11-10 18:45:06 -06:00
LinFor 48b7a1e66e Allow non-zero "fan off" PWM value (#15709) 2019-11-10 16:33:56 -06:00
Scott Lahteine 288af0ddf6 Whitespace 2019-11-01 15:39:05 -05:00
studiodyne f139642e0f XY/Z Babystep Multiplicators (#15691) 2019-10-28 16:44:17 -05:00
Scott Lahteine 7a342ecb93
Show Total E during print (#15703) 2019-10-27 17:49:27 -05:00
Scott Lahteine 93f0012959
Cancel Objects - As seen at ERRF2019 (#15590) 2019-10-24 15:35:40 -05:00
Scott Lahteine 2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time (#15578) 2019-10-24 14:00:59 -05:00
Scott Lahteine ccf61eca84 Fix diplay elaspsed 2019-10-24 13:48:27 -05:00
Luu Lac 0b0b822671 Add note: TMC2209 requires stealthChop for Sensorless Homing (#15658) 2019-10-24 11:58:37 -05:00
Robby Candra 16ae9ee88b Update Configuration_adv 2019-10-17 05:37:22 +07:00
Robby Candra 9b88c3e79b DOGM Progress Display, option to disable display rotation 2019-10-17 05:26:09 +07:00
Jason Smith 832cb7e1ac Z_STEPPER_AUTO_ALIGN — To align with Z stepper points (#15195) 2019-10-16 13:39:58 -05:00
InsanityAutomation b2eda1af2f Fix typo in G34 configuration (#15572) 2019-10-15 17:22:13 -05:00
LinFor b20d5a7cc6 Estimate Remaining Time (graphical display) (#15497) 2019-10-10 21:03:33 -05:00
Scott Lahteine b4d48fdc91 Followup to #15481 2019-10-08 21:38:02 -05:00
Scott Lahteine c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
Scott Lahteine 9dcccc11ba Fix extra condition 2019-10-07 22:36:49 -05:00
Giuliano Zaro a1ad01e4ab Limit Case Light PWM (#15459) 2019-10-05 22:32:50 -05:00
Bob Kuhn 178dcd6fd8 SPI chaining with TMCStepper simplified interface (#15179) 2019-09-29 05:47:20 -05:00
Scott Lahteine 50e4545255
Add custom types for position (#15204) 2019-09-29 04:25:39 -05:00
Ludy f28f191ebf Trailing whitespace (#15403) 2019-09-28 15:32:37 -05:00
InsanityAutomation a6b0223eea Revive and improve DELTA probe bounds, LRFB options (#15372) 2019-09-28 01:19:11 -05:00
Scott Lahteine 9a209012b5 Improve M114_DETAIL comment 2019-09-25 20:29:29 -05:00
Marcio Teixeira 149e9b733e Simplified ExtUI language selection (#15359) 2019-09-25 01:25:21 -05:00
Marcio Teixeira 4ff59d178d LULZBOT_TOUCH_UI extended character set (#15301) 2019-09-24 18:49:40 -05:00
InsanityAutomation 6a312fae80 Add before/after dir change delays (#15314) 2019-09-19 23:05:17 -05:00
Scott Lahteine 843a19102c Shorten an option description 2019-09-14 16:45:04 -05:00
Scott Lahteine 3d0ead7dcb Bring Configuration_adv.h up to date 2019-09-14 04:30:17 -05:00
Scott Lahteine 1d574b0f6a Tweak config spaces 2019-09-11 17:32:54 -05:00
Marcio Teixeira 47d19bab40 Lulzbot ExtUI Western language support (#15208) 
Fix #15134
 2019-09-10 20:07:03 -05:00
Jamie dbee0e9c54 Analog joystick jogging control (#14648) 2019-09-08 00:55:34 -05:00
Scott Lahteine a3052da703 Move manual move to lcd section 2019-09-06 18:24:39 -05:00
Scott Lahteine 18dd5cb46a Config comment patch 2019-09-05 01:48:12 -05:00
Scott Lahteine 2563e32aa3 Format FWRETRACT config comments 2019-09-04 12:48:50 -05:00
Bob Kuhn ba91bca1eb TMC SPI daisy chain support (experimental) (#15081) 2019-08-30 17:39:45 -05:00
thisiskeithb f5a1fabd38 Clarify TMC2209 Sensitivity vs. Others (#15092) 2019-08-29 16:57:56 -05:00
Robby Candra 38983fdfa9 Add 'Back' Button for Touch TFT 320x240 (#15060) 2019-08-29 01:19:07 -05:00
AlexandrZloy 0ebaea94be Add stallGuard threshold for X2 (#15042) 2019-08-29 00:15:31 -05:00
Marcio Teixeira da601d5114 Update USB_FLASH_DRIVE_SUPPORT (#15021) 2019-08-24 01:47:19 -05:00
Scott Lahteine 5e777601f3
Add TURBO_BACK_MENU_ITEM option (#14991) 2019-08-20 19:37:03 -05:00
Tim Moore 67f8ba6fed Allow pullup/downs on power loss pin (#14986) 2019-08-20 02:40:44 -05:00
Scott Lahteine c8e476ad60 Embed some items in HAS_LCD_MENU 2019-08-18 18:41:51 -05:00
Ludy 6715fd159c Animated Marlin boot screen (#14961) 2019-08-17 18:40:01 -05:00
Marcio Teixeira 8bdb3d9970 Add CONTROLLERFAN_SPEED_Z_ONLY (#14956) 2019-08-16 21:57:19 -05:00
Marcio Teixeira 274934ad81 Add LULZBOT_TOUCH_UI (#14967) 2019-08-16 18:34:13 -05:00
Marcio Teixeira 179d6c4ed1 Add STARTUP_SCRIPT option. M17 parity with M18. (#14953) 2019-08-14 21:05:15 -05:00
Joseph Bozarth 0fbb26c28f M16 - Expected Printer Check (#14924) 2019-08-13 23:38:45 -05:00
teemuatlut d4974ea719 TMC SPI Endstops and Improved Sensorless Homing (#14044) 2019-08-04 22:22:58 -05:00
rafaljot e44fccf3d2 Add support for M575 (#14757) 2019-07-30 02:30:00 -05:00
MarcelMo f8aa52346f Configurable Z move distance (#14593) 2019-07-30 02:16:26 -05:00
Marcio Teixeira eefe3f595a New options: Bootscreen as Info, game Easter-egg (#13829) 2019-07-28 22:47:20 -05:00
Scott Lahteine 6b02b89ab4 Update serial sub-unit descriptions 2019-07-28 17:38:37 -05:00
Giuliano Zaro 290466578f Adafruit Grand Central M4 (#14749) 2019-07-28 14:48:29 -05:00
Scott Lahteine 5c3ec6306f
Max7219 side-by-side arrangement (#14702) 2019-07-22 05:22:21 -05:00
Scott Lahteine b3f42d2519 Update SD host config comment 2019-06-28 19:13:27 -05:00
Scott Lahteine 93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine d7d80418ae
Singleton for cutting tools (#14429) 2019-06-27 23:06:49 -05:00
Scott Lahteine 00cc1079af Add missing chamber auto fan options 2019-06-27 16:05:47 -05:00
Andy Shaw 064177154c Update SD card connection / sharing options (#14325) 2019-06-26 03:55:57 -05:00
InsanityAutomation aa0383a83b Enhance IDEX toolchange auto-return w/ no park, full control (#14117) 2019-06-23 20:00:48 -05:00
InsanityAutomation a9acd2f497 G34 configurable angle limit (#14321) 2019-06-20 21:18:36 -05:00
Scott Lahteine a31cb910f5 Tweak some config spacing 2019-06-20 21:08:47 -05:00
Scott Lahteine 4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Scott Lahteine dd06017f64 Bring configs up to date 2019-06-19 01:03:51 -05:00
Scott Lahteine aacb904e1f Adjust some config comments 2019-06-17 20:22:07 -05:00
mb300sd bf8bfb5c66 Add Coolant Control M7/M8/M9 (#10745) 2019-06-13 18:43:11 -05:00
Scott Lahteine f7792c0192 Group manual move options 2019-06-12 19:49:18 -05:00
Kaushik Vemparala c88d9ae282 Option to leave heaters set on SD abort (#14251) 2019-06-10 23:57:55 -05:00
InsanityAutomation b7eeb5b13b Move BLTouch options to adv config (#14131) 
Plus other BLTouch and menu enhancements.
 2019-06-10 17:46:42 -05:00
Scott Lahteine 0ca2073625 ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT 2019-06-10 17:28:35 -05:00
teemuatlut cccc51ee0e TMC Square Wave Stepping mode (#14195) 2019-06-09 05:08:05 -05:00
InsanityAutomation 4138b1f9ae Option to disable Case Light brightness control (#14165) 2019-06-07 07:23:42 -05:00
InsanityAutomation 123e58d9c3 Heated Chamber for Graphical LCD (#14190) 2019-05-30 18:31:50 -05:00
Scott Lahteine 7cce6b8d68 Bring configs up to date (MANUAL_FEEDRATE) 2019-05-25 16:31:13 -05:00
Scott Lahteine 9bf65eacaa Remove old adv config heading 2019-05-19 15:24:01 -05:00
Scott Lahteine 785c01f2bc Use US spelling of 'behavior' 2019-05-15 01:49:17 -05:00
chai-md 940ff8e7c8 Improve LV8729 stepping (#13776) 2019-05-11 19:02:19 -05:00
Tanguy Pruvot 11adcf1ce3 Add'l PLR options, AVR strstr_P compat (#13880) 2019-05-07 20:38:40 -05:00
Stephan 483822f3aa Fix some THERMAL_PROTECTION_CHAMBER issues (#13678) 2019-05-06 19:55:01 -05:00
doggyfan 23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
InsanityAutomation 3fcab8dbf1 Option to disable fans during pause (#13820) 2019-05-04 15:50:44 -05:00
Robby Candra 0181e57417 Add a minimum Z change option to power-loss recovery (#13859) 2019-05-02 22:29:05 -05:00
Roxy-3D 142c8e2fed
Remove redundant Frivolous Game Options 2019-04-28 14:03:53 -05:00
Scott Lahteine 9ccbd382e7 Update Watchdog description 2019-04-27 14:56:12 +02:00
Bob-the-Kuhn db89fc0304 Revert "bring my copy up to date" 
This reverts commit 503905c628.
 2019-04-25 17:38:41 -05:00
Bob-the-Kuhn 503905c628 bring my copy up to date 2019-04-25 12:08:49 -05:00
Bob-the-Kuhn 520585c5ed Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-17 15:34:29 -05:00
jmdearras 5f49b65c1f Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712) 2019-04-15 22:55:33 -05:00
Bob-the-Kuhn 9dd4252b39 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-12 22:07:12 -05:00
Stephan 84273557f9 Move and update heated chamber settings (#13671) 
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
 2019-04-12 15:38:10 -05:00
Scott Lahteine cee3b172b9
Fix Marlin splash screen logic (#13646) 2019-04-10 17:14:57 -05:00
InsanityAutomation ba31d39f6d Azteeg X5 Mini support (#13425) 2019-04-08 23:10:45 -05:00
Scott Lahteine 9abe9aff56
Confirm before starting SD print (#13616) 2019-04-08 13:44:35 -05:00
Roxy-3D 9cee81d47e Option to show babysteps total since G28 (#13580) 2019-04-06 18:04:34 -05:00
Scott Lahteine 3221658a78 Adjust park position description 2019-04-05 20:40:50 -05:00
Marcio Teixeira 27a4927ed1 Add option to move away from endstop after homing. (#13557) 
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
 2019-04-04 02:47:19 -05:00
Robby Candra 46445a5a16 Event G-code for Stop SD Print (#13547) 
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
 2019-04-02 22:09:30 -05:00
Scott Lahteine 8b7c3eec83 Games, for fun (and stress-testing) (#13464) 2019-04-01 17:48:54 -05:00
Scott Lahteine 5de7b5b35e
Games, for fun (and stress-testing) (#13464) 2019-04-01 15:43:48 -05:00
InsanityAutomation 7240e3a68f Allow G26 with no heated bed (#13511) 2019-03-29 13:32:43 -05:00
Sam Lane e3ab54753b Add extra Linear Advance factors (#13490) 2019-03-26 04:02:27 -05:00
Scott Lahteine d2e0c03afb Remove trailing whitespace 2019-03-25 20:51:38 -05:00
7eggert d96f7d6068 Minimum segments for G2/G3. Better for small arcs. (#13466) 2019-03-24 19:53:47 -05:00
Scott Lahteine 49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
InsanityAutomation 09eb30dc05 IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404) 2019-03-15 22:46:27 -05:00
Hadrien Jouet 0278ad0a6d Add ESP32 WiFi interface (#11209) 2019-03-13 00:48:08 -05:00
InsanityAutomation 050eac03af Single X Duplication Extension (#13373) 
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
 2019-03-13 00:42:50 -05:00
Michiel Baird b824a517aa Add G38.4 and G38.5 (#13348) 2019-03-10 17:22:09 -05:00
Reece Kibble dbead66988 Allows user to set (almost) any PWM frequency (#12638) 2019-03-08 02:15:42 -06:00
3dlabsio 645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
InsanityAutomation bf8b38e0f7 Relocate configs above Marlin/src folder (#13299) 2019-03-03 16:50:56 -06:00
Scott Lahteine 998ce55be0 Alternative fan bitmap 2019-02-28 22:08:20 -06:00
Chris Pepper 4ab433d391 Fix binary protocol with one serial port (#13270) 
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
 2019-02-27 19:57:48 -06:00
InsanityAutomation eb4bf93ea4 Add more Babystep options (#13262) 2019-02-27 04:38:56 -06:00