zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
9499 commits 1 branch 0 tags 156 MiB
Commit graph

7847 commits

Author SHA1 Message Date
Scott Lahteine a3b098b4be Whitespace clean 2017-12-06 14:02:44 -06:00
AnHardt a993c5227d Don't split first_move while homing or probing 
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
 2017-12-06 14:13:05 +01:00
Mateusz Krawczuk 5320906b0b
Update TEMP_BED_PIN in MIGHTYBOARD_REVE 
Pin K7 number in fastio1280.h is 69, but it's also ADC15 pin. 
To get correct value from ADC reading it should be set as 15.
 2017-12-06 12:07:20 +01:00
Scott Lahteine aeb5c623c1 Show "Level Bed Corners" with UBL too 
Addressing #8676
 2017-12-05 21:58:43 -06:00
Scott Lahteine 5fbb2f121e Remove skew warning that could crash the planner 2017-12-05 20:27:20 -06:00
Richard Wackerbarth c1184552ac Change K1 to required option PID_K1 2017-12-05 19:59:59 -06:00
revilor 9e3fbcf35c fix for #8669 (#8679) 
* fix for #8669

* Update G28.cpp
 2017-12-05 19:40:36 -06:00
Scott Lahteine d8b444c144 Cleanup constextpr in planner.cpp 2017-12-05 18:55:57 -06:00
Scott Lahteine a2372cfab5 Fix SKEW_CORRECTION without leveling 2017-12-05 18:48:34 -06:00
Scott Lahteine 4d3c3d0b73 Some ST7920 parity with 1.1.x 
Possibly more should be brought over? Discussion at #8471
 2017-12-05 02:22:36 -06:00
Scott Lahteine 3748c28924 Fix MBL G29 without LCD 
Addressing https://github.com/MarlinFirmware/Marlin/pull/8575#discussion_r154536617
 2017-12-05 01:57:45 -06:00
Scott Lahteine 772298257b Creality pins spacing, MINIPANEL CS pin 2017-12-05 01:57:45 -06:00
Scott Lahteine b27bc67271 Set initial endstops state 2017-12-05 01:10:31 -06:00
Scott Lahteine b6ba32ce75 Support for RAMPS Plus (3DYMY) 2017-12-05 00:42:21 -06:00
Scott Lahteine 53694ebaa1 Folllwup to planner splitting 2017-12-04 18:55:23 -06:00
Scott Lahteine 37fff608b0
Merge pull request #8652 from fiveangle/bf2_usbcon_xonxoff 
[2.0.x] SERIAL_XON_XOFF not supported on USB-native AVR devices
 2017-12-04 16:46:18 -06:00
Scott Lahteine 4b612f590c Split first move to planner for better chaining 2017-12-04 15:27:47 -06:00
Unknown 91b63f6d69 SERIAL_XON_XOFF not supported on USB-native AVR devices 
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
 2017-12-04 03:57:01 -08:00
Bob-the-Kuhn 57fac33a74 add explanations 
1) add explanations as to why software SPIs are selected

2) remove unused flag/option
 2017-12-03 20:32:22 -06:00
Bob-the-Kuhn bb23286383 add README & modify spi_pins.h 
still trying to fix file name
 2017-12-03 20:00:56 -06:00
Scott Lahteine dd8febca1a Revert "Merge pull request #8611 from thinkyhead/bf2_planner_split_first" 
This reverts commit 824980e70e, reversing
changes made to aa7efb96bf.
 2017-12-03 17:50:19 -06:00
Bob-the-Kuhn fb44f8e50f
Merge pull request #8616 from hg42/bugfix-2.0.x 
[2.0.x][LPC1768][FIX] NUM_DIGITAL_PINS was negative, fixes PWM, arduino io functions, M42, M43, M226, probably also Servo, some LCD, soft spi, SoftwareSerial, ... may be others
 2017-12-03 14:48:00 -06:00
Bob-the-Kuhn 4c5356f77a
Merge pull request #8622 from hg42/implement-LPC1768-GET_TIMER 
[2.0.x][LPC1768][fix] Implement GET_TIMER and other GET_xxx, fixes PWM
 2017-12-03 14:46:22 -06:00
Harald Gutsche f5b4e1ef4f as a workaround enable PWM for any pin, see PR #8622 2017-12-03 20:37:02 +01:00
Scott Lahteine 6e944a413c
Merge pull request #8607 from benlye/patch-1 
[2.0.x] Fix M49 so that it does not hang the terminal console
 2017-12-03 03:41:33 -06:00
Scott Lahteine 967522b95e
Merge pull request #8615 from dot-bob/Duplicator_6-2.0.x 
[2.0.x] Example configurations for Wanhao Duplicator 6
 2017-12-03 03:37:48 -06:00
Scott Lahteine f4b16a3bac
Update M49.cpp 2017-12-03 03:34:56 -06:00
Scott Lahteine f9327534f8
Merge pull request #8634 from fiveangle/bf2_report_xonxoff 
[2.0.x] Report SERIAL_XON_XOFF in M115
 2017-12-03 02:18:50 -06:00
Scott Lahteine da9f140829
Merge pull request #8637 from thinkyhead/bf2_ubl_uses_LSL 
[2.0.x] Use custom segment length for UBL Cartesian
 2017-12-03 01:57:49 -06:00
Scott Lahteine 3a97de52ef Split first move to planner for better chaining 
Address #8573, #8595
 2017-12-03 01:27:14 -06:00
Scott Lahteine 24437de591 Use custom segment length for UBL Cartesian 2017-12-03 00:10:54 -06:00
Unknown 4c5ffd2349 [2.0.x] Report SERIAL_XON_XOFF in M115 
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
-Update error message conditions
 2017-12-02 21:08:06 -08:00
Scott Lahteine aa7efb96bf Bring configurations up to date 2017-12-02 21:50:51 -06:00
Scott Lahteine 63a91cd37a Fix a homing comment 2017-12-02 21:02:37 -06:00
Scott Lahteine 8056120195 Rename inverse_mm_s => inverse_secs 2017-12-02 20:28:09 -06:00
Scott Lahteine 23557f8e77 Remove obsolete de_float 2017-12-02 20:23:10 -06:00
Jonathan Barchi 05f8e98c4a Fix for issue #8629 - mismatch between number of stored and loaded dummy items on non-delta machines. (#8631) 2017-12-02 19:04:58 -06:00
Roxy-3D 48fb4e0932
Get Bi-Linear to work with G26 
More corrections to make that happen...
 2017-12-02 14:14:24 -06:00
Roxy-3D 0850b38b45
Get Bi-Linear working with G26 
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
 2017-12-02 14:10:30 -06:00
Scott Lahteine 000b3b3117 Comment/cleanup of motion code 2017-12-02 01:09:55 -06:00
Scott Lahteine 046a1ad331
Merge pull request #8625 from tcm0116/2.0.x-G33 
[2.0.x] Fix missing return values in G33_auto_tune
 2017-12-02 00:51:19 -06:00
Thomas Moore b35c3b5eb8 Fix missing return values in G33_auto_tune 2017-12-01 21:29:16 -06:00
Scott Lahteine 45c2388a58 Apply const to thermal_runaway_protection args 2017-12-01 19:42:44 -06:00
Scott Lahteine 0154e3480c New feature: BED_SKEW_CORRECTION 2017-12-01 19:39:49 -06:00
Scott Lahteine 082ab8fcab Add SKEW_CORRECTION to example configs 2017-12-01 19:22:27 -06:00
Unknown d1f11e9c10 fix missing GET_TIMER (used by PWM for Ex_AUTO_FAN) 2017-12-01 22:28:55 +01:00
Harald Gutsche dd1b503f64 fix NUM_DIGITAL_PINS being negative for more than 127 digital pins 2017-12-01 07:39:46 +01:00
dot-bob bd45d0363d Add default configurations for the Wanhao Duplicator 6. 2017-11-30 23:24:33 -07:00
Scott Lahteine 91fb6231b2 Fix EEPROM V45 header, layout 2017-11-30 22:45:17 -06:00
Roxy-3D 94e6b2976e
Restore correct G26 values for gMax 1.5+ printer 2017-11-30 18:12:17 -06:00
Scott Lahteine dd3ce40826 Drop Planner::position_float, use int types 2017-11-30 17:43:31 -06:00
Scott Lahteine ec6ca37ed3 Fix (un)apply_leveling fade bug 2017-11-30 17:25:44 -06:00
Scott Lahteine a52fec6ac4 Planner class parity with 1.1.x 2017-11-30 15:55:08 -06:00
Ben Lye 1f3ad461bc
Update M49.cpp 
Fix M49 so that it does not hang the terminal console.
 2017-11-30 20:17:44 +00:00
Scott Lahteine e37dd64548 Apply LEDColor, language fixes 2017-11-29 23:58:12 -06:00
Scott Lahteine 8f90642eea LED_CONTROL_MENU config changes 2017-11-29 21:02:56 -06:00
Tannoo cf0f78336b New Feature: LED_CONTROL_MENU 2017-11-29 21:02:55 -06:00
Scott Lahteine 23e45fa3c4 Apply const to some planner vars 2017-11-29 21:02:55 -06:00
Scott Lahteine 7c61bcb058 Apply SEGMENT_LEVELED_MOVES to example configs 2017-11-29 16:57:31 -06:00
Scott Lahteine ef2531558c Add an option to segment leveled moves 2017-11-29 16:57:30 -06:00
Scott Lahteine 285b868e9b Tweak planner code style 2017-11-29 15:22:18 -06:00
Scott Lahteine 1f2acc33bc Tweaks for check_axes_activity 2017-11-28 18:41:13 -06:00
Vitaliy Sapyanov 7f88334aa3 Done cleanup and removed duplicates in pins_RuRAMPS4D.h (#8582) 
Remove duplicates, with followup fixes
 2017-11-28 18:33:12 -06:00
Scott Lahteine a8aa43ce2d
Merge pull request #8587 from AnHardt/2_Fix_WDTO_during_long_DELTA_moves 
[2.0.x] Fix WDTO during long delta moves
 2017-11-28 17:29:18 -06:00
Scott Lahteine 4793c34c53 Fix M290 boolval bug 
Fix #8577
 2017-11-28 17:21:33 -06:00
Scott Lahteine 16baa48699 Fix #8579 
Fan speed code fell into a curly brace
 2017-11-28 16:12:14 -06:00
AnHardt 02aa93a6ad Fix Watchdog time out during long lasting DELTA moves 
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented. 
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
 2017-11-28 17:03:51 +01:00
Scott Lahteine fadf9eb2d7 Simplify midpos calculation 2017-11-27 14:00:35 -06:00
Scott Lahteine 0880031e8e Satisfy M702 dependencies 2017-11-27 13:39:59 -06:00
Scott Lahteine 0786b61ce7 Followup to #8575 2017-11-27 12:58:40 -06:00
Scott Lahteine 276271e72f Make MBL work more like PROBE_MANUALLY 2017-11-27 02:12:29 -06:00
Scott Lahteine 94cb412e45 Allow override of probe bounds 2017-11-26 20:55:27 -06:00
Scott Lahteine c8718aa111 Spacing, macros in LPC1768_PWM 2017-11-26 20:20:05 -06:00
Scott Lahteine a67cf78c6b Clean up whitespace, spacing 2017-11-26 20:18:52 -06:00
Scott Lahteine f0dd4e3fa0 Bootscreen parity with 1.1.x 2017-11-26 20:07:17 -06:00
Scott Lahteine b634bfe1b1 Tweak to readDir code 2017-11-26 18:25:00 -06:00
Scott Lahteine 7be4857ab9 Tweak BLOCK_BUFFER_SIZE description 2017-11-26 17:36:40 -06:00
Bob-the-Kuhn 7d8b66e207
Merge pull request #8570 from Bob-the-Kuhn/Sbase-PWM 
[2.0.x] MKS Sbase - add servo pin definitions and add directly controlled PWM
 2017-11-26 09:36:18 -06:00
Bob-the-Kuhn 59b32c25b5 MKS Sbase changes 2017-11-26 07:47:06 -06:00
Scott Lahteine f90c075d1f SD Menu patches 2017-11-26 01:14:18 -06:00
Scott Lahteine 9b64be0bc5 Fixes for leveling sub-menus 2017-11-26 00:05:36 -06:00
Scott Lahteine 25674da90c Tweaks to do_blocking_move 2017-11-25 23:31:16 -06:00
Scott Lahteine 22b897e77d Show M211 output with workspace offset 2017-11-25 20:48:20 -06:00
Scott Lahteine d06e29846d Loosen HAS_BED_PROBE definition 2017-11-25 20:11:21 -06:00
Roxy-3D e48fcad615 change G26 and G29 bit function names to avoid HAL collision 2017-11-25 19:58:45 -06:00
Scott Lahteine 41ec449960 Fix G26 error return 2017-11-25 19:53:14 -06:00
Scott Lahteine 9badf5dc0d Fix Micromake C1 config 2017-11-25 18:41:07 -06:00
Scott Lahteine 7576ad7fc2
Merge pull request #8554 from tcm0116/2.0.x-cleanup 
[2.0.x] Fix for #8525 and other cleanup
 2017-11-25 18:19:54 -06:00
Scott Lahteine 27c5692b13 Syntax tweaks 2017-11-25 18:13:36 -06:00
Scott Lahteine d18d40e1d6 M290 report on change, P0 to leave Probe Z Offset alone 2017-11-25 16:47:39 -06:00
LVD-AC 65f365333f [2.0.x] G33 probe error handling 2017-11-25 16:19:10 -06:00
Bob-the-Kuhn 8c69adba8b
Merge pull request #8553 from Bob-the-Kuhn/2.0.x-U8Glib-follow-up 
[2.0.X] U8Glib follow up
 2017-11-25 14:26:32 -06:00
Scott Lahteine be00e421a7 Patch up M290, M851 2017-11-25 14:11:57 -06:00
Bob-the-Kuhn fc40d56131 fixed error, updated defaults, added notes 
Travis fix - only allow ultralcd_st7920_u8glib_rrd_AVR.cpp to compile when ST7920 selected
 2017-11-25 12:35:03 -06:00
Roxy-3D d29cb646e3
Fix erroneous reference to temperature in time calculations 
Travis is having problems at:  https://github.com/MarlinFirmware/Marlin/pull/8560   

So...   doing a direct commit to get things correct.   Bugfix_v1.1.x does not have this bug.  Nothing needs to be done to that branch.
 2017-11-25 10:40:56 -06:00
Thomas Moore 7bb1721f35 Fix _BV already defined warnings for Teensy 2017-11-24 22:34:39 -06:00
Thomas Moore 5f9592a523 Cleanup narrowing warning in pin_is_protected 2017-11-24 22:15:56 -06:00
Thomas Moore 34eaaab5fb Fix _BV already defined warnings 2017-11-24 21:59:31 -06:00
Thomas Moore 2ea779e560 Allow bed probe sanity checks to run 2017-11-24 21:59:01 -06:00
Scott Lahteine d24b1190bd Don't use Z_MIN_PROBE_ENDSTOP on DELTA 2017-11-24 18:24:22 -06:00
Scott Lahteine e34c6827ea Init MIXING virtual tools as switching 2017-11-24 18:02:09 -06:00
Scott Lahteine a9ecb975b2 Apply LINEAR_UNIT to M503 output for M200 2017-11-24 17:32:48 -06:00
Scott Lahteine d95ee0f003
Merge pull request #8551 from revilor/bugfix-2.0.x 
MK2_MULTIPLEXER does not require E2/E3 stepper pins
 2017-11-24 17:16:23 -06:00
Scott Lahteine 80ada58818 One fewer function call in probe_pt 2017-11-24 17:10:38 -06:00
oliver 92a0dc552a MK2_MULTIPLEXER does not require E2/E3 stepper pins 2017-11-24 23:56:39 +01:00
Scott Lahteine b49acce035 Tweaks for lcd_external_control 2017-11-24 15:53:25 -06:00
Scott Lahteine 1ef1052ae1 Phatter arrows for Z offset overlay 2017-11-24 15:53:25 -06:00
Scott Lahteine 5926c9c97b Followup for MESH_EDIT_GFX_OVERLAY 2017-11-24 15:53:25 -06:00
Scott Lahteine ab03a31cc9 Patch G0/G1 for NANODLP_Z_SYNC 2017-11-24 14:11:12 -06:00
Scott Lahteine a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync 
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
 2017-11-24 13:11:14 -06:00
Scott Lahteine 01e207213f Fix MK2_MULTIPLEXER stepper indirection 2017-11-24 12:49:28 -06:00
Roxy-3D ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch (#8543) 
These changes may need to be warmed over.  I tried to fix things with
the least amount of disruption.   I just wanted to get the bugfix_v2.0.0
branch working for people again.
 2017-11-24 10:39:56 -06:00
Scott Lahteine dc82babe8e Implement NANODLP_Z_SYNC for 2.0.x 2017-11-24 00:28:06 -06:00
Scott Lahteine c6b0c104bb Adapt G26 to work for all meshes 2017-11-23 22:31:37 -06:00
Scott Lahteine 5ce7f23afa Config option G26_MESH_VALIDATION for all meshes 2017-11-23 21:43:23 -06:00
Scott Lahteine c19eb33408 Move G26 to gcode sub-folder 2017-11-23 21:43:23 -06:00
Scott Lahteine a03f93bab4 Fix fan kickstart 2017-11-23 21:42:45 -06:00
Scott Lahteine 9e3c41f9e8 Tweak fan kickstart / speed code 2017-11-23 15:20:35 -06:00
GMagician 118ac61e59 [2.0.x] Tool change bad behaviour fix 
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
 2017-11-22 20:24:03 -06:00
Scott Lahteine c35d27f77c
Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4 
[2.0.x] Add BIQU BQ111-A4 board
 2017-11-22 19:16:04 -06:00
Scott Lahteine 1685cd193b Tweak char_mode init 2017-11-22 19:12:08 -06:00
Scott Lahteine 9406c87a97 Fix up LCD init / charset 2017-11-22 18:22:55 -06:00
Thomas Moore fa577392b2 Add BIQU BQ111-A4 board 2017-11-22 16:34:59 -06:00
Scott Lahteine c2fc78c3a8 #ifndef => #if !PIN_EXISTS 2017-11-22 16:28:52 -06:00
Scott Lahteine c613a1ed38 Fix indentation, stepper.h dependency, etc. 2017-11-22 14:55:30 -06:00
teemuatlut f011a32771 Board definitions for Ultratronics Pro v1.0 2017-11-22 14:55:24 -06:00
Bob-the-Kuhn 9dad534f02 fixed 2017-11-21 21:37:20 -06:00
Scott Lahteine 4371345cbe
Don't re-init graphical LCD after boot screen 
Followup to 13a3fb1acc
 2017-11-21 18:23:39 -06:00
Scott Lahteine 56c02b7f59 Shift register buttons question 
Can LCD shift registers keep up with faster MCUs?
 2017-11-21 16:12:40 -06:00
Scott Lahteine 3994d3b935 General cosmetic LCD 2017-11-21 16:12:40 -06:00
Scott Lahteine 617993d0ea Patch for !!TEST (was _BV once?) 2017-11-21 16:12:08 -06:00
Scott Lahteine 3269d8dd62 Tweak M42 var 2017-11-21 16:12:08 -06:00
Mateusz Krawczuk bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE 
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
 2017-11-21 14:38:02 +01:00
Scott Lahteine 1ce0fb336b Patch Max7219_LED_Set input args 2017-11-20 21:15:15 -06:00
GMagician a61127a421 [2.0.x] tool change bad behaviours 
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
 2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov e2724c68ab Update pins_RURAMPS4D.h 
Add and bugfix pins
 2017-11-20 15:36:13 -06:00
Scott Lahteine 9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42 
[2.0.x] Updates to Anet A8 configurations
 2017-11-20 15:12:30 -06:00
Scott Lahteine 3066655727 Try port*100+pin, fix config dependency 2017-11-20 13:58:23 -06:00
Scott Lahteine ba8bc7ea80 Cosmetic tweaks 2017-11-20 13:58:02 -06:00
Scott Lahteine f409147116 Fix P2_04, P2_05 2017-11-20 13:58:02 -06:00
Bob-the-Kuhn a28ccabe2a M42 P1.20 fix 2017-11-20 13:58:02 -06:00
Unknown 33912fa7e8 Update Temperature::setPwmFrequency prototype to match source 
Introduced with #8446
 2017-11-20 01:50:41 -08:00
Scott Lahteine b9327a4d16 Misc. general cleanup 2017-11-19 15:43:39 -06:00
Scott Lahteine 8836623e0f Fix sq/min/max macros after platform headers 2017-11-19 15:43:39 -06:00
Scott Lahteine fe4f009fdd 32-bit unless… 2017-11-19 15:43:38 -06:00
Scott Lahteine 25af9decfe Remove enum.h include of MarlinConfig.h 2017-11-19 15:43:38 -06:00
Scott Lahteine 1d4571b88d Dependency adjustments 2017-11-19 15:43:38 -06:00
Scott Lahteine 550f1025f0 Try using <Arduino.h> everywhere 2017-11-19 14:23:02 -06:00
Scott Lahteine c0000a0cdc Move servo code to modules/servo.* 2017-11-19 14:23:02 -06:00
Scott Lahteine 81bc428b48 Don't compile custom u8g without DOGLCD 2017-11-19 13:58:38 -06:00
Bob-the-Kuhn c14000775b PWM fixes, slow down fan update 
include LPC1768 syntax for M42

couple more pin_t changes

consistency

change M42 to R, P format

Revert "change M42 to R, P format"

This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
 2017-11-18 07:05:50 -06:00
Scott Lahteine 60adc6ff02 Display filwidth ratio in terms of E mm 2017-11-18 07:01:49 -06:00
Scott Lahteine 6e533748eb Fixes #8472 2017-11-18 05:15:55 -06:00
Scott Lahteine 485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks 
[2.0] No retroactive adjustment with M851 Z
 2017-11-18 04:49:53 -06:00
Scott Lahteine 3bba7d60f3 No retroactive changes with M851 Z 
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.

To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.

It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.

One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.

Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
 2017-11-18 03:36:39 -06:00
Scott Lahteine 32512332df Apply some formatting 2017-11-18 03:12:30 -06:00
Scott Lahteine 7dacc999b9 Remove obsolete show_bootscreen var 2017-11-17 17:01:43 -06:00
Roxy-3D 9729528d13
Update UBL's Delta Probable locations 
This is a non-intuitive change.   @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits.   This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
 2017-11-17 16:44:57 -06:00
Scott Lahteine d48cb6bf41 Apply coding standards to Max7219 2017-11-17 15:32:21 -06:00
Scott Lahteine bd8bcf06e7 Updates to Anet A8 configurations 
Based on #8426
 2017-11-16 23:19:36 -06:00
Bob-the-Kuhn 7eea000f4b E0 auto fan fixes 2017-11-16 18:42:56 -06:00
Scott Lahteine b2dda096fe Fix FILAMENT_LCD_DISPLAY for disabled state 2017-11-16 16:57:48 -06:00
Scott Lahteine 1e8afb66b7 Fix a planner comment 2017-11-16 16:57:47 -06:00
Scott Lahteine 50f09cc029 Miscellaneous cleanup 2017-11-16 00:47:16 -06:00
Scott Lahteine 63257dc083 Fix M503 output for M145 
Fixes #7978
 2017-11-15 04:00:18 -06:00
Scott Lahteine 0918dae66e Add OV() macro for use in thermistor tables 2017-11-15 03:15:18 -06:00
Scott Lahteine 24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x 
[2.0.x] Fix Software Fan PWM
 2017-11-15 02:30:19 -06:00
Scott Lahteine 5079a02c90 Add HAL_SERVO_LIB to HAL_Due.h 2017-11-15 02:07:01 -06:00
Scott Lahteine 9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines 
[2.0] Fix 'M32 P' subroutines
 2017-11-15 01:15:02 -06:00
Scott Lahteine e0d367f1fb Fix M32 P subroutine handling 2017-11-15 00:44:21 -06:00
Scott Lahteine 9f8b4c5ee8 Patch SD lib files for readability 2017-11-15 00:44:21 -06:00
Scott Lahteine 2c8c30437e Fix parser parameter value handling 2017-11-14 23:20:33 -06:00
RowanMeara 6131533157 Change dithering behavior to intended. 2017-11-14 00:47:07 -08:00
Scott Lahteine e70b44dc0b Make sure leveled[] is defined for later use 2017-11-14 02:13:38 -06:00
Scott Lahteine 54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL 
[2.0] Add M114_DETAIL to Configuration_adv.h
 2017-11-14 00:28:55 -06:00
Scott Lahteine 009e3a7aa7 Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:03:17 -06:00
Scott Lahteine 6d6c3b1e97 Fix up REPRAPWORLD_KEYPAD defines 2017-11-13 22:14:54 -06:00
Scott Lahteine 3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:05:57 -06:00
Scott Lahteine b76e173205 Move test extrusion options under G26 2017-11-13 21:05:57 -06:00
Scott Lahteine 14ebedca27 Drop unused LARGE_FLASH option 2017-11-13 15:44:24 -06:00
Scott Lahteine b7feb53e8a Support for Extrudrboard in Printrboard Rev.F 2017-11-13 15:44:23 -06:00
Scott Lahteine 91baca6abb Patches for compiler warnings/errors 2017-11-13 04:43:47 -06:00
Scott Lahteine 2f73dec077 Apply native workspace fixes for G92, G53-59 2017-11-13 02:09:12 -06:00
Scott Lahteine 04abd8d459 Improve and clarify M428 code 2017-11-13 02:09:11 -06:00
Dave Johnson c009a990e4 [2.0.x] Fix some 8-bit Teensyduino compile warnings (#8385) 
* Fix some 8-bit Teensyduino compile warnings

-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins

* Proper cleanup of Printrboard Rev.F pins

* Apply LCD fixes to Printrboard v1
 2017-11-13 01:07:59 -06:00
Scott Lahteine e8e92f8969 No leveling data in M114 if no leveling is enabled 2017-11-12 23:03:38 -06:00
Scott Lahteine f5d210c35c Fix report_current_position 2017-11-12 23:02:53 -06:00
Roxy-3D faaae7a1b2
Provide more clearance for BL-Touch probe 2017-11-12 13:11:22 -06:00
Scott Lahteine 06ee6584fd Remove offsets from soft endstops, tool change 2017-11-11 22:47:38 -06:00
Scott Lahteine c938273bd5 Coding standard patch of M290 2017-11-11 22:14:21 -06:00
Scott Lahteine 98c1265e3b Disable laser power when PWM goes to 0 2017-11-11 22:00:22 -06:00
Scott Lahteine d4a1154c25 Use do_blocking_move_to where possible 2017-11-10 20:55:23 -06:00
Scott Lahteine 36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600 
[2.0.x] Normalize load/unload length in M600
 2017-11-10 19:44:08 -06:00
Scott Lahteine 1ed86adf9c Cleanup around updatePID 2017-11-10 19:27:34 -06:00
Scott Lahteine 75a58ee4b8 Fix position_is_reachable bug in waiting 2017-11-10 19:27:33 -06:00
LVD-AC e334efb2a7 PROBE_MANUALLY etc. 2017-11-10 19:27:33 -06:00
Bob-the-Kuhn b6415dc169 finish 2017-11-10 14:39:55 -06:00
Scott Lahteine 0efa66be0b Updates to Traditional Chinese 
From @cheton at #8347
 2017-11-10 04:52:20 -06:00
Scott Lahteine cba9c1cf9e Add pre-calculated planner.e_factor 2017-11-10 03:14:24 -06:00
Thomas Moore 600c85226e Normalize load/unload length in M600 2017-11-10 02:31:46 -06:00
Scott Lahteine 81b91b3f9d Clean up some trailing white-space 2017-11-10 02:31:04 -06:00
Roxy-3D 2f9848ede3
Correct gMax 1.5+ example file 
And...   Keep both branches in synchronization.
 2017-11-09 23:44:14 -06:00
Scott Lahteine 006dad4b52 Add pins_RURAMPS4D.h & change pins.h 
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
 2017-11-09 21:51:06 -06:00
Scott Lahteine 00514857e9 SBASE serial port -1, RAMPS spacing 2017-11-09 21:41:07 -06:00
Scott Lahteine c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height 
[2.0.x] Add delta_height variable in lieu of using home_offset
 2017-11-09 01:21:53 -06:00
Scott Lahteine 22e18fe832 Patch _manual_goto_xy for kinematics 2017-11-08 22:21:38 -06:00
Scott Lahteine 0cfb936dd1 Clarify some motion code 2017-11-08 22:15:55 -06:00
Thomas Moore f34c3597dc Add delta_height variable in lieu of using home_offset 2017-11-08 22:10:08 -06:00
Bob-the-Kuhn d47fbf791b Arduini IDE compatibility changes 
changed includes to make Arduino IDE happy
 2017-11-08 20:49:49 -06:00
Scott Lahteine 95ea43bde4 Update XYZ dual stepper configurations 2017-11-08 20:31:43 -06:00
Scott Lahteine b0b4a20930 Tweaks to core motion code 2017-11-08 20:09:09 -06:00
Scott Lahteine 8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug 2017-11-08 20:06:20 -06:00
Scott Lahteine 24437fbb13
Fix G26 Y argument bug 2017-11-08 19:20:10 -06:00
Scott Lahteine 09b05c9d79
Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm 
2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers
 2017-11-08 13:11:13 -06:00
Scott Lahteine e6788bb6ae Fix get_destination_from_command for E 2017-11-08 12:54:00 -06:00
Roxy-3D 967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. (#8333) 2017-11-08 11:56:00 -06:00
Bob-the-Kuhn 8875885a15 pins add old names 
fix typo

re-write PWM section, add "not on Re-ARM" list
 2017-11-08 11:11:38 -06:00
Roxy-3D 1c6e83c137
if !HAS_MESH we still need to do some motion! (#8328) 
* if !HAS_MESH we still need to do some motion!

Thank You MagoKimbra !

* Ooops....   need #else and not #elif
 2017-11-08 09:42:21 -06:00
Scott Lahteine 82f45c3e6a Patch G33 misuse of PROBE_MANUALLY 2017-11-08 00:36:06 -06:00
Scott Lahteine 064e6fe60e Remove debugging pin toggle from LCD code 2017-11-07 23:00:54 -06:00
Bob-the-Kuhn 0483a7df91 AVR RRD works 
LPC1768 VIKI2 & RRDFG are working

looks like all SPIs are working

library change

sh1106 locks up

fixed lockup, started I2C SW com

pretty

re-org

restore a few files

make library happy

switched HAL version of rrd

fix travis error

travis error fixes

another travis fix

cleanup

minor update

one more

correct spacing in platformio.ini
 2017-11-07 18:40:29 -06:00
Scott Lahteine 96c9d715f3 Patch abuse of sprintf_P in G33 2017-11-07 17:33:50 -06:00
Roxy-3D ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) 
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
 2017-11-07 17:13:53 -06:00
Scott Lahteine 8fea26aa9d Fix PID_autotune watch temp increase value 2017-11-07 15:51:48 -06:00
Scott Lahteine 2c099fd4c2 Update Thermal Protection Documentation 2017-11-07 15:46:44 -06:00
Colten Edwards a6160916b0 [2.0] Fix M48 for delta printers/ABL compile issue (#8286) 
* fix M48 for delta printers

fix M48 for delta printers. home printer if not already homed.

* remove ENABLED(DELTA)

remove ENABLED(DELTA) as it is not needed.

* Update M48.cpp

* abl needs queue.h

without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
 2017-11-07 15:36:33 -06:00
Scott Lahteine 17ef0a513b Update G92 for native workspace 2017-11-07 13:07:16 -06:00
Scott Lahteine b4bf8928aa German language updates 
Corresponding to #8306
 2017-11-07 12:10:29 -06:00
Thomas Moore 73ca5345e1 Fix Delta EEPROM 2017-11-07 16:48:21 +00:00
Scott Lahteine 714d2b9bbc
Merge pull request #8297 from thinkyhead/bf2_M118_and_others 
[2.0] Fix M118, compiler warnings, etc.
 2017-11-06 23:25:49 -06:00
Alexey Shvetsov 83555933aa Add platformio support for stm32 (#8246) 
[2.0] Add platformio support for stm32
 2017-11-06 23:03:59 -06:00
Scott Lahteine 85a62bbf46 Misc. fixes to compiler warnings, etc. 2017-11-06 22:57:05 -06:00
Scott Lahteine e6aba99f16 Fix M118 parameters, with strict guideline 2017-11-06 22:57:01 -06:00
Scott Lahteine e9b1944a67 Patch non-extended font option 2017-11-06 21:42:21 -06:00
Roxy-3D 6324b09934
Revert "Fix EEPROM crc (#8284)" (#8292) 
This reverts commit 172c36f517.
 2017-11-06 19:52:05 -06:00
Rowan Meara 172c36f517 Fix EEPROM crc (#8284) 2017-11-06 19:19:30 -06:00
Scott Lahteine cc4d28b73c
Update bilinear for native workspace 2017-11-06 17:04:41 -06:00
Scott Lahteine 94c7205d64
Merge pull request #8281 from thinkyhead/bf2_alligator_dac 
[2.0] Use fastio for Alligator dac084s085, etc.
 2017-11-06 12:16:18 -06:00
Scott Lahteine 2246316605 Fix name collision. timer_t => hal_timer_t 2017-11-05 19:31:07 -06:00
Jason Hitesman 4efaef7039 [2.0.x] Fix archim2 SSDS define (#8278) 
* Fix SSDS define

* Update pins_ARCHIM2.h
 2017-11-05 19:23:19 -06:00
Scott Lahteine c8dfa26bc8 Use fastio for STM32F1 endstop interrupts 2017-11-05 19:20:28 -06:00
Scott Lahteine 185dec800b Use fastio for HAL SPI EEPROM 2017-11-05 19:20:03 -06:00
Scott Lahteine 297666ea14 Use fastio for Alligator dac084s085 2017-11-05 19:14:42 -06:00
Scott Lahteine c5d95d318b
Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup 
[2.0] Cleanup Nozzle class, fix XY vs Z move order
 2017-11-05 18:51:11 -06:00
Scott Lahteine 7e2fee9d56
Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8 
[2.0.x] Correct RAMPS_D8_PIN for Re-ARM
 2017-11-05 18:39:28 -06:00
Scott Lahteine 59c558d612
Merge pull request #8275 from GMagician/2.0.x-Typo-fix 
[2.0.x] typo fix (removed spaces)
 2017-11-05 18:39:04 -06:00
Scott Lahteine be73d5cc08 Cleanup Nozzle class, fix XY vs Z move order 2017-11-05 18:31:07 -06:00
GMagician 9e93b7ccbd [2.0.x] removed spaces 
Removed spaces in array declaration
 2017-11-05 20:42:48 +01:00
Thomas Moore b91a822d7a Correct RAMPS_D8_PIN for Re-ARM 2017-11-05 13:03:42 -06:00
studiodyne d295f984e3
Update fwretract.cpp 2017-11-05 15:42:30 +01:00
Scott Lahteine 1b40e9c464 Implement CNC_COORDINATE_SYSTEMS 2017-11-04 22:28:46 -05:00
Scott Lahteine 1b42fba39b Add CNC_COORDINATE_SYSTEMS to configs 2017-11-04 22:28:46 -05:00
Scott Lahteine a22434508f Match tweaks to G33 from 1.1 2017-11-04 22:28:46 -05:00
Scott Lahteine c07bbd4154 Prettify some EEPROM code 2017-11-04 22:28:46 -05:00
Scott Lahteine d6aa127c76 Remove I2CPEM workspace offset 2017-11-04 22:28:46 -05:00
Scott Lahteine 79772219ae Fix Fan Multiplexer init 2017-11-04 22:28:46 -05:00
Scott Lahteine ca7d36d9ed RAMPS pins for ANET_KEYPAD_LCD 2017-11-04 21:22:53 -05:00
Colten Edwards e0a6ee8da5 [2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA (#8250) 
* Update Conditionals_post.h

* Add a cast to round() to convert to a unsigned int

Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast.

* Update G33.cpp
 2017-11-04 18:04:18 -05:00
Scott Lahteine dac1f6fe74 Tweaks to cubic_b_spline code style 2017-11-04 14:46:10 -05:00
Scott Lahteine 4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation 
[2.0.x] Operate in Native Machine Space
 2017-11-04 14:31:44 -05:00
Scott Lahteine 601ccded89 Fix case-insensitive config issue 2017-11-04 14:10:13 -05:00
Scott Lahteine f8393a0908 Operate in Native Machine Space 2017-11-04 00:05:38 -05:00
Scott Lahteine d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1 
[2.0] Add SERIAL_PORT -1 option for configurators
 2017-11-03 15:25:12 -05:00
Scott Lahteine 93ba72ea83 Add SERIAL_PORT -1, set on SBASE, STM32F103RET6 2017-11-03 15:22:45 -05:00
Scott Lahteine 7e43dd1d23 Fix probes configuration url 
Based on #8241 by @machaj
 2017-11-03 13:35:40 -05:00
AnHardt ca0e4b4e96 Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()' 
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
 2017-11-03 12:02:48 +01:00
Scott Lahteine 84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak 
[2.0.x] Faster menu navigation for Anet A8
 2017-11-03 04:49:17 -05:00
teemuatlut 70be4d206e [2.0.x] UltiMachine Archim2 (#8190) 
* UltiMachine Archim2 support

* SPI gets included by the library

* Invert TMC2130 diag pin state

* Clean up Archim2 pins

* Update Archim2 config

* FAN2 -> FAN1

* Cleanup

* Add brief Archim installation instructions

* Bring pins into compliance

* Update 1.0 SD Detect pin for 1.1

* Update Configuration.h

* Update pins_ARCHIM2.h
 2017-11-03 04:48:15 -05:00
Scott Lahteine f3deb37bdf
Merge pull request #8236 from thinkyhead/bf2_protect_M303 
[2.0.x] M303 thermal runaway protection
 2017-11-03 04:42:14 -05:00
Scott Lahteine 31f112cf58 Cleanup trailing whitespace 2017-11-03 04:07:45 -05:00
Scott Lahteine 2f9e42feb9 M303 thermal runaway protection 2017-11-03 03:57:46 -05:00
Scott Lahteine e5ae545647 Remove ADCKey steps acceleration 2017-11-03 03:41:55 -05:00
Luc Van Daele 6827e243a0 [2.0.x] G33 magic numbers (#8171) 
* [2.0.x] G33 magic numbers

* oops

* Comments

* oops

* warning

* better comment section

* remarks

* extra grids
 2017-11-03 03:36:16 -05:00
Scott Lahteine 8735ae984b
Merge pull request #8227 from tcm0116/2.0.x-pin_mapping 
LPC1768: updates to use the new pin_t typedef
 2017-11-03 03:10:19 -05:00
AnHardt c72a0610b4 Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:43:00 +01:00
Thomas Moore 13d839795c LPC1768: updates to use the new pin_t typedef 2017-11-02 18:43:57 -05:00
Scott Lahteine eb13b8d985 Add MKS Gen L board 2017-11-02 17:06:08 -05:00
Morten 063e957fc4 Update pins_MKS_SBASE.h (#8188) 
* Update pins_MKS_SBASE.h

Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4      P0_14  // EXP1.5 to #define LCD_PINS_D4      P0_15  // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...

* Update pins_MKS_SBASE.h

Moved MUX signals to J8 and re added MUX2, cleaner wiring..
 2017-11-02 13:50:23 -05:00
Scott Lahteine f7133e53fd
Fix case light off 
Addressing #8205
 2017-11-01 21:22:15 -05:00
Scott Lahteine 0108d5181f Allow asterisks in G-Code commands 
Addressing #6655
 2017-10-31 21:20:41 -05:00
Scott Lahteine 34745b2183 Organize boards.h by architecture 2017-10-31 16:10:38 -05:00
android444 9cc1d8e312 [2.0.x] Support for SilverGate Board 2017-10-31 15:27:26 -05:00
Scott Lahteine 03e5369411 Faster menu navigation for Anet A8 
Addressing #8166
 2017-10-31 14:46:55 -05:00
Scott Lahteine f1edf83720
Merge pull request #8187 from rafaljot/patch-5 
Update InterruptVectors_Due.cpp
 2017-10-31 14:14:08 -05:00
Scott Lahteine b2bd77c40a
Merge pull request #8191 from thinkyhead/bf2_rearm_more 
[2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768
 2017-10-31 14:12:14 -05:00
Scott Lahteine 571ced712d Add SDCARD_SORT_ALPHA options for LPC1768 2017-10-31 14:05:40 -05:00
rafaljot 778e4e4c23
Update InterruptVectors_Due.cpp 
const pfnISR_Handler *isrtab = get_relocated_table_addr();

What compiler do you use? Arduino 1.8.5 can't compile this "const".
 2017-10-31 15:00:06 +01:00
Scott Lahteine cae8703e0d
Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat 
[2.0.x] Only show custom bootscreen once
 2017-10-31 02:37:40 -05:00
Scott Lahteine a516856df9 Only show custom bootscreen once 2017-10-31 01:47:30 -05:00
GMagician 727a403ba1 [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8176) 
* [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour

NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed

* Update G0_G1.cpp

* Update G0_G1.cpp
 2017-10-30 22:50:22 -05:00
Alexey Shvetsov 577659cacf Basic support for Azteeg_X5_GT (#8139) 
* Basic support for Azteeg_X5_GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Add fan pins for AZTEEG X5 GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Fix endstop pins

* Add servo0 pin
 2017-10-30 16:01:20 -05:00
Scott Lahteine 0b02f9cc33
Merge pull request #8168 from thinkyhead/bf2_config_tweak 
[2.0.x] Apply Re-ARM SPI review items
 2017-10-30 15:49:50 -05:00
Scott Lahteine 04c0d9f3c3 Implement kinematic software endstops 2017-10-30 15:16:30 -05:00
Scott Lahteine 9f89b5d876 Fix for MAX_VFAT_ENTRIES sanity check 2017-10-30 15:11:47 -05:00
Scott Lahteine 2cdde08339 Apply items specified in code review 
Followup to #8122
 2017-10-30 15:03:07 -05:00
Scott Lahteine 34be5d33c0 The plural of 'axis' is 'axes' 2017-10-30 14:21:43 -05:00
Bob-the-Kuhn 6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution) 
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
 2017-10-30 13:16:16 -05:00
Bob-the-Kuhn b7a66742dd tested 
add sort alpha section to other LPC1768 boards
 2017-10-30 13:01:19 -05:00
Jeffrey Li bbc2e66634 Fix AZSMZ MINI pins for new LPC1768 pinmapping 2017-10-30 04:19:06 -07:00
Scott Lahteine 31e96935f7 Fix EXTRA_FAN_SPEED 
Addressing #8158
 2017-10-30 00:10:00 -05:00