zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
6920 commits 1 branch 0 tags 156 MiB
Commit graph

1698 commits

Author SHA1 Message Date
Thomas Otvald Jensen fe059f1221 During homing, line_to_axis_pos will make a path which moves across the 
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!

Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
 2016-07-30 16:50:31 +02:00
esenapaj bd73e6d3c8 Fix for PR #4452 (Additional heater-state output changes) 
・Add missing ';'
 2016-07-30 22:49:30 +09:00
Scott Lahteine bdac2eb13a Don't set non-existent SLED_PIN 2016-07-30 04:17:21 -07:00
Scott Lahteine 8e2f095dde Merge pull request #4456 from jbrazio/speaker-type3 
Improvement to non-blocking speaker
 2016-07-30 04:07:08 -07:00
Scott Lahteine 9e21b2e51d Merge pull request #4455 from AnHardt/double-bump-feature 
double bump probing as a feature
 2016-07-29 20:00:10 -07:00
Scott Lahteine db4d03bc81 Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2 
Additional heater-state output changes
 2016-07-29 19:58:00 -07:00
Scott Lahteine 844a4e799e Account for DELTA in Planner::refresh_positioning 2016-07-29 18:41:11 -07:00
AnHardt 7188ce0ad6 double bump probing as a feature 
Why double touch probing is not a good thing.

It's widely believed we can get better __probing__ results when using a double touch when probing.

Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.

Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.

What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.

So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)

What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
 2016-07-30 03:00:49 +02:00
Scott Lahteine c31f56a38c Deprecate EXTRUDER_WATTS and BED_WATTS 2016-07-29 17:34:14 -07:00
Scott Lahteine e1970b4b28 Show power output in same order as temp output 2016-07-29 14:55:22 -07:00
Scott Lahteine 74df828acc Show ADC values inline rather than after 2016-07-29 14:55:18 -07:00
João Brázio 2b5faa61e2 Consolidates Buzzer and Speaker into a single object 2016-07-29 19:25:39 +01:00
Scott Lahteine b40661cb18 Fix output of heater states 2016-07-28 17:40:01 -07:00
Scott Lahteine 8953e3e984 Allow Z_SAFE_HOMING without a probe 2016-07-27 04:33:56 -07:00
Scott Lahteine 5272147f7c Followup #4402 fixing 3-point leveling 2016-07-25 15:56:34 -07:00
Scott Lahteine 169c21b477 Merge pull request #4402 from thinkyhead/rc_consistent_positioning 
Account for coordinate space offsets
 2016-07-24 19:23:20 -07:00
Scott Lahteine 2595a40a61 Account for coordinate space more in G28 / G29 / M48 2016-07-24 18:34:05 -07:00
Scott Lahteine b7b7c90477 Merge pull request #4389 from thinkyhead/rc_optimize_planner 
Optimize planner with precalculation, etc.
 2016-07-24 17:48:23 -07:00
Scott Lahteine b183442c61 Fix inactive_extruder_x_pos for coordinate space 2016-07-24 17:20:36 -07:00
Scott Lahteine f75b0c2ee1 Make POSITION macros global 2016-07-24 17:20:36 -07:00
Scott Lahteine 101b60ef42 Tweak Dual X Carriage data spacing 2016-07-24 17:20:35 -07:00
Scott Lahteine d8f2876753 Replace some float division with multiplication 2016-07-24 13:27:50 -07:00
Scott Lahteine f8b5749235 Replace division in planner with multiplication 2016-07-24 13:27:49 -07:00
Scott Lahteine db5df9500b Move sync_plan_position closer to the top 2016-07-24 13:27:49 -07:00
João Brázio 50fb0f7cec M31 serial output is now always in EN 2016-07-24 15:52:03 +01:00
João Brázio 62d96d72f3 Renamed timestamp_t to duration_t 2016-07-24 03:16:02 +01:00
Scott Lahteine bb93b6822a Use set_current_from_steppers_for_axis 2016-07-23 15:25:54 -07:00
AnHardt 96a162beda Use implications from #4370 in run_z_probe() 
See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680
 2016-07-23 13:09:28 -07:00
Scott Lahteine 4e67a85a5d Macros to loop over axes 2016-07-23 13:09:28 -07:00
esenapaj 784be56e99 Follow-up the PR #4353 (General cleanup: enum) 
・Update description of M111
 2016-07-24 00:53:35 +09:00
Scott Lahteine 08459a003f Undo the self-sabotage that is do_blocking_move_to_axis_pos 2016-07-23 00:59:11 -07:00
esenapaj d32c4056ad Fix for the PR #4379 (Additional logging of do_blocking_move_to) 
・Remove unneeded PSTR()
 2016-07-23 16:38:57 +09:00
Scott Lahteine 8099ee51a5 Merge pull request #4379 from thinkyhead/rc_blocking_move_logging 
Additional logging of do_blocking_move_to
 2016-07-23 00:10:55 -07:00
Scott Lahteine ad16d5019e Additional logging of do_blocking_move_to 2016-07-22 23:53:08 -07:00
Scott Lahteine 652fd8a826 Merge pull request #4362 from thinkyhead/rc_duplication_mode 
DUAL_NOZZLE_DUPLICATION_MODE
 2016-07-22 21:17:59 -07:00
Scott Lahteine 6da3729531 Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics 
Delta Forward Kinematics (and LOGICAL_POSITION)
 2016-07-22 21:16:00 -07:00
Scott Lahteine b3eb0c8569 Add LOGICAL_POSITION macro, apply to kinematics 2016-07-22 18:38:13 -07:00
Scott Lahteine 35a610abf9 const arg to inverse_kinematics 2016-07-22 17:42:48 -07:00
Scott Lahteine b6afa028f4 Don't call adjust_delta on SCARA 2016-07-22 16:36:34 -07:00
Scott Lahteine d5e2d523c7 Generalize kinematics function names 2016-07-22 16:36:34 -07:00
Scott Lahteine 9c4ad7d7ef Clean up delta declarations in Marlin_main.cpp 2016-07-22 16:36:33 -07:00
Scott Lahteine 4b1725628b Move kinematic functions to "private" scope 2016-07-22 16:36:33 -07:00
Scott Lahteine cde068ea42 Use set_current_from_steppers in quickstop_stepper 2016-07-22 16:36:33 -07:00
Scott Lahteine 9f30cc84ce Use set_current_from_steppers for other kinematics 2016-07-22 16:36:33 -07:00
AnHardt 5db9b940ee Use forwardKinematics in DELTA run_z_probe() 2016-07-22 16:36:33 -07:00
Scott Lahteine cbc7f22ad9 Implement DUAL_NOZZLE_DUPLICATION_MODE 2016-07-22 16:23:58 -07:00
Scott Lahteine 179e091473 Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t 
Implements timestamp_t structure
 2016-07-22 16:08:10 -07:00
AnHardt 499e404fbf forwardKinematics for Delta printers 2016-07-22 16:01:51 -07:00
João Brázio 23043a1e05 Rework some code to use timestamp_t struct (saves 72 bytes) 2016-07-22 15:53:31 -07:00
Scott Lahteine 0b2c608d2f Merge pull request #4372 from jbrazio/gcc-bark 
Fix minor gcc warning
 2016-07-22 15:18:53 -07:00
Scott Lahteine 311c7dadb6 Cleanup do_blocking_move_to for DELTA 2016-07-22 14:18:45 -07:00
Scott Lahteine b78590e63d Patch and cleanup run_z_probe 2016-07-22 14:18:45 -07:00
João Brázio 2f7716987d Fix minor gcc warning 2016-07-22 16:08:56 +01:00
AnHardt 376a57232e DELTA do_blocking_move_to() more like the Chartesian one 2016-07-22 03:12:46 +02:00
AnHardt 6ef26a85d8 Back to the differences method in run_z_probe() 2016-07-21 18:16:38 +02:00
Scott Lahteine 16e5348659 Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28 
Always switch to tool 0 for G28
 2016-07-20 19:07:35 -07:00
Scott Lahteine d2e9a9c188 Always switch to tool 0 for G28 2016-07-20 09:36:55 -07:00
Scott Lahteine 194d9521c3 Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe 
Unify run_z_probe
 2016-07-19 19:02:39 -07:00
AnHardt 09a3cc33e6 Unify run_z_probe 
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
  defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
 2016-07-19 18:42:48 -07:00
Scott Lahteine 204fd6ec44 Set homing feedrates individually 2016-07-19 17:31:58 -07:00
João Brázio 47fef80848 Nozzle::clean() no longer requires HAS_BED_PROBE 2016-07-19 15:07:02 -07:00
Scott Lahteine 6c899bb520 Merge pull request #4349 from jbrazio/gcc-bark-bark 
Removes some minor GCC warnings
 2016-07-19 13:42:33 -07:00
Scott Lahteine c502018eab Merge pull request #4353 from jbrazio/global-enum-file 
General cleanup: enum
 2016-07-19 13:37:56 -07:00
AnHardt 11c075c6b2 Introduce line_to_axis_pos(axis_codes axis, float where, float feed_rate = 0.0) 
and use it in `homeaxis()` instead of `do_blocking_move_to_axis_pos()`.
`do_blocking_move_to_axis_pos` was wrong because it performed subdivided, delta-corrected moves for x- and y-axis.

The first common move for delta homing is like quick_home but for 3 towers.

Fix two warnings.
 2016-07-19 17:24:44 +02:00
João Brázio 3ebad4e020 Moves all global enums to a central file 2016-07-19 14:31:09 +01:00
João Brázio 30ac0782a9 Comment section style correction 2016-07-19 03:27:42 +01:00
João Brázio 79e7721b76 Removes some minor GCC warnings 2016-07-19 03:03:11 +01:00
Scott Lahteine 3422103863 Merge pull request #4310 from thinkyhead/rc_mbl_position_shift 
Fix position shift with MBL
 2016-07-17 18:31:25 -07:00
Scott Lahteine 493d30cd97 Drop intermediate nx, ny, and set destination directly 2016-07-17 17:59:52 -07:00
Scott Lahteine 07a735ad22 We always use destination so modify mesh_buffer_line 2016-07-17 17:57:33 -07:00
Scott Lahteine 04a5b7b257 A macro to normalize positions 2016-07-17 17:57:32 -07:00
Scott Lahteine 86eb5251c5 Fix some debug messages 2016-07-17 17:10:02 -07:00
Scott Lahteine 1e57a6af73 Use blocking_move, current_position in G28 homing 2016-07-17 16:56:13 -07:00
Scott Lahteine f6a3a1da09 nz and ne are always set, so drop them down 2016-07-17 14:12:39 -07:00
Scott Lahteine d0009e013b Rename cell index vars 2016-07-17 14:12:39 -07:00
Scott Lahteine 697373b071 Reduce code size of mesh_buffer_line 2016-07-17 14:11:25 -07:00
Scott Lahteine f4a69281fc Only call mesh_buffer_line when MBL is active 2016-07-17 14:11:25 -07:00
Scott Lahteine 799a31cd30 Include the position_shift when splitting mesh lines 2016-07-17 14:08:20 -07:00
Scott Lahteine f242aea032 Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you 
Wrangle feed rate variables
 2016-07-17 14:07:52 -07:00
Scott Lahteine 0342661b3f Merge pull request #4335 from thinkyhead/rc_status_pad_jp 
Debug char, fix compile errors for lcd pins
 2016-07-17 14:07:08 -07:00
Scott Lahteine 5ed1e7a464 codenum => dwell_ms 2016-07-17 13:35:21 -07:00
Scott Lahteine f38553b482 fix a debug message 2016-07-17 13:29:42 -07:00
Scott Lahteine 3d78b8f929 Use HYPOT macro instead of hypot function 2016-07-17 13:29:42 -07:00
Scott Lahteine 9f9fe043ba Apply sq macro throughout 2016-07-17 13:29:41 -07:00
Scott Lahteine 93ba5bddd7 Append units to feedrate variables 2016-07-17 13:29:41 -07:00
Scott Lahteine 21ee0612e3 Debug char 2016-07-17 12:27:36 -07:00
Scott Lahteine 8f24e0a556 Debugging of MBL in G28 2016-07-17 11:08:30 -07:00
Scott Lahteine 05da02f0a2 Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER 2016-07-17 10:53:10 -07:00
Scott Lahteine 02285662f5 Merge pull request #4298 from jbrazio/feature/filament-counter 
Adds filamentUsed and longestPrint stats to PrintCounter
 2016-07-16 23:48:46 -07:00
Scott Lahteine bf16ae5a70 Merge pull request #4299 from jbrazio/feature/g27-park-nozzle 
Implements park nozzle feature
 2016-07-16 23:47:12 -07:00
João Brázio a8758619ec The safe_delay() is now globaly accessible 2016-07-16 12:28:06 +01:00
João Brázio f5234b0695 Adds a customizable screen timeout for the default boot screen 2016-07-16 12:24:36 +01:00
João Brázio 2f26bc2153 Adds filamentUsed and longestPrint stats to PrintCounter 2016-07-16 12:12:27 +01:00
João Brázio c711701626 Implements a nozzle parking command (G27) 2016-07-16 12:07:59 +01:00
João Brázio 5f368d1bc3 Followup for #4320 2016-07-16 11:57:35 +01:00
João Brázio d7c51bc4b9 Merge pull request #4320 from jbrazio/followup/4307 
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
 2016-07-16 11:48:00 +01:00
Scott Lahteine e563634a25 Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28 
Use do_blicking_move_to*() in G28
 2016-07-15 20:22:02 -07:00
Scott Lahteine 59ae1811c2 Merge pull request #4303 from AnHardt/delta-g28 
DELTA: Move out of the clip-zone after G28
 2016-07-15 20:20:22 -07:00
João Brázio fdea8b6e6a Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define 2016-07-16 03:59:49 +01:00
AnHardt d2a49c016d DELTA: Move out of the clip-zone after G28 
Move down to a safe height after G28 for DELTAs.
 2016-07-15 15:22:44 +02:00
AnHardt 46994fd17d Use do_blicking_move_to*() in G28 2016-07-15 15:02:15 +02:00
João Brázio ffbb31b235 Fixes an PSTR overflow with print_xyz() 2016-07-15 11:25:34 +01:00
Scott Lahteine cec7110409 Merge pull request #4308 from thinkyhead/rc_debug_gcode_t 
Added logging related to gcode_T
 2016-07-14 19:46:33 -07:00
Scott Lahteine 166f19251e Add more debugging for leveling 
- Especially in `gcode_T`
- In `update_software_endstops`
- Some tweaks to observe
 2016-07-14 19:04:13 -07:00
Scott Lahteine 7ac0b91a45 Collapsible long comment in gcode_T 2016-07-14 18:28:41 -07:00
João Brázio e71a631f8f do_blocking_move_*() no longer depend on HAS_BED_PROBE 2016-07-15 01:54:14 +01:00
Scott Lahteine 8bf6861af8 Merge pull request #4054 from jbrazio/feature/g12-clean-tool 
Implements clean nozzle feature (Lulzbot's REWIPE)
 2016-07-14 14:38:38 -07:00
Scott Lahteine 1618870c84 card.printingHasFinished does print_job_timer.stop 2016-07-14 11:39:58 -07:00
Scott Lahteine 34da77dad3 Simply run M31 at the end of an SD print 2016-07-14 11:39:58 -07:00
Scott Lahteine a8d71f0ac6 Support longer print times in M31 2016-07-14 11:39:58 -07:00
Scott Lahteine e481b79af1 Allow stopwatch and printcounter to go over 18 hours 2016-07-14 11:39:57 -07:00
João Brázio 4937f9ada4 Minor G12 tweaks and point_t struct extension 2016-07-14 00:07:36 +01:00
João Brázio 021544f572 Improves G12 zig-zag pattern 2016-07-13 21:14:56 +01:00
João Brázio b05a75655a Implements a nozzle cleaning pattern generator (G12) 2016-07-13 21:14:19 +01:00
Scott Lahteine 4f77adddbe Merge pull request #4286 from thinkyhead/rc_debug_clean 
Prefix and suffix in debug output
 2016-07-12 20:49:15 -07:00
Scott Lahteine e5c7af5ddc Merge pull request #4222 from thinkyhead/rc_allow_cold_extrude 
M302: Add "P" parameter, status output
 2016-07-12 20:40:14 -07:00
Scott Lahteine 2224032568 Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine 
No delay for the smallest LCD moves
 2016-07-12 20:16:38 -07:00
Scott Lahteine d4c68279c8 Add "P" parameter to M302 2016-07-12 20:04:15 -07:00
Scott Lahteine a8b6b6a128 Merge pull request #4252 from thinkyhead/rc_rename_hpb 
Replace PLA/ABS preheating with generic
 2016-07-12 20:00:33 -07:00
Scott Lahteine 1e14df876d Use varname as prefix in DEBUG_POS, string as suffix 2016-07-12 19:58:09 -07:00
Scott Lahteine 9e8b3e5ee6 Homing direction is irrelevant in probe raise! 2016-07-12 18:09:02 -07:00
Scott Lahteine 4865447830 Merge pull request #4276 from esenapaj/Suppress-warnings 
Suppress warnings
 2016-07-11 19:08:59 -07:00
esenapaj 58177a1602 Suppress warnings 2016-07-12 08:22:24 +09:00
AnHardt 7bcab26f2a Don't deploy/stow the probe if z-min-endstop is used for homing 
Don't deploy/stow the probe if z-min-endstop is used for homing.
Don't apply `zprobe_zoffset` if probe was not used.
 2016-07-11 22:01:44 +02:00
AnHardt e92e58df1f Adjust wait_for_cooling slope 
Adjust wait_for_cooling slope
and drop mintemp for cooling.

See
https://github.com/MarlinFirmware/Marlin/pull/4169#issuecomment-231544532
 2016-07-11 03:36:23 +02:00
Scott Lahteine ee0983ab57 Further reduction when HOTENDS == 1 2016-07-10 16:54:30 -07:00
Scott Lahteine f9e08b1fcd Merge pull request #4254 from AnHardt/killscreen 
Add a kill-screen
 2016-07-09 20:44:42 -07:00
AnHardt faac2bcfdb Add a kill-screen 2016-07-10 04:50:45 +02:00
Scott Lahteine 3b3e52616c Merge pull request #4253 from thinkyhead/rc_clexpert_runout 
Runout Sensor without SD Card, Print Timer support in M104
 2016-07-09 19:10:36 -07:00
Scott Lahteine 4cd045791c Reduce code size by trusting the compiler 2016-07-09 18:17:44 -07:00
Scott Lahteine a8538bd7ce General cleanup, code reduction in Marlin_main.cpp 2016-07-09 18:17:44 -07:00
Scott Lahteine 1026e5b071 Replace PLA/ABS preheating with generic 2016-07-09 18:06:51 -07:00
Petr Zahradník junior 315b4c2153 Runout sensor without SD Card 2016-07-09 17:57:53 -07:00
AnHardt 468f7f03a2 homeaxis() can leave early 
when no known axis needs to be homed.

Most changes are only caused from altering the indentation.
```
if (axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0) {
  ...
}

to

if (!(axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0)) return;
...

```
 2016-07-08 15:59:33 +02:00
AnHardt eff7912243 Ensble/disable hardware endstops in G28 globally. 
For moving away from the endstops we do not have to disable them.
They are not tested anyway.
 2016-07-08 15:49:10 +02:00
AnHardt f69434d81c Eliminate void setup_for_endstop_move() 2016-07-08 15:23:20 +02:00
AnHardt 0ea6247fc2 Use logic in Z_SAFE_HOMING 
Use logic in Z_SAFE_HOMING

From
```
if (home_all_axis || homeZ) {
  if (home_all_axis) {
  ...
  home z
  }
  else if (homeZ) { // Don't need to Home Z twice
  home z
  }
}

```
to
```
if (home_all_axis || homeZ) {
  if (home_all_axis) {
  ...
  }
  home z
}
```
 2016-07-08 15:08:50 +02:00
AnHardt de3a169336 Always define MIN_Z_HEIGHT_FOR_HOMING even if 0 
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
Always make a potential rise to `home_offset[Z_AXIS]` possible in G28.
Get rid of some very ugly constructs in MBL (ultralcd.cpp).
 2016-07-08 15:08:32 +02:00
AnHardt 88ed232f53 Remove HAS_BED_PROBE case in first raise in G28 
Differentiating made sense here when we could save a dozen lines of code,
but not for one line.
 2016-07-08 14:59:44 +02:00
AnHardt 653eff3b31 Clean up quick_home_xy() 
Since we do the actual homing now in the 'normal' routines `quick_home_xy()`
can be simplified to a relative simple diagonal move.
 2016-07-08 14:59:27 +02:00
Scott Lahteine 98d0167a57 Merge pull request #4226 from thinkyhead/rc_emergency_command_parser 
MarlinSerial emergency-command parser (with M108)
 2016-07-07 16:53:55 -07:00
Scott Lahteine 2ee4e4f791 Make wait_for_heatup volatile 2016-07-07 16:37:23 -07:00
Scott Lahteine 834ad14c8d Add quickstop_stepper to update current position with stepper.quick_stop() 2016-07-07 16:37:22 -07:00
Scott Lahteine ecffe92e20 Group EMERGENCY_PARSER commands 2016-07-07 16:37:22 -07:00
AnHardt a129078927 Add an emergency-command parser to MarlinSerial (supporting M108) 
Add an emergency-command parser to MarlinSerial's RX interrupt.

The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.

To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.

This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".

The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.

One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"

Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.

Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
 2016-07-07 16:37:22 -07:00
Scott Lahteine 9f42b1a075 Merge pull request #4235 from thinkyhead/rc_revert_quickhome_test 
Fix quick homing, tweak MIN_Z_HEIGHT_FOR_HOMING
 2016-07-07 13:37:14 -07:00
Scott Lahteine ad968f2325 Merge pull request #4234 from thinkyhead/rc_better_position_logging 
Move XYZ in print_xyz and DEBUG_POS to the front
 2016-07-07 12:31:15 -07:00
Scott Lahteine 4036c73cdd Don't raise Z if only homing Z 2016-07-07 12:28:37 -07:00
Scott Lahteine 0b6f8f8244 Apply MIN_Z_HEIGHT_FOR_HOMING raise literally 2016-07-07 12:25:02 -07:00
Scott Lahteine 177ec20bf0 Revert quick-home changes 2016-07-07 12:17:34 -07:00
Scott Lahteine 9c5b462ef2 Move XYZ in print_xyz and DEBUG_POS to the front 2016-07-07 11:42:19 -07:00
Scott Lahteine 4e84c803a3 Merge pull request #4232 from thinkyhead/rc_no_axis_codes_needed 
Don't use axis_codes if a literal will do
 2016-07-06 20:05:16 -07:00
Scott Lahteine e2f7cb0905 Don't use axis_codes if a literal will do 2016-07-06 18:37:21 -07:00
Scott Lahteine 6559f7359f Fix comment on Z raise for homing, save a few bytes 2016-07-06 16:21:51 -07:00
Scott Lahteine d0b29cabf3 Don't re-home X and Y if you quick homed 2016-07-06 13:46:06 -07:00
Scott Lahteine e0a6b978f5 Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING 2016-07-06 13:46:05 -07:00
Scott Lahteine 7735ec5e7a Merge pull request #4223 from thinkyhead/rc_rename_heatup 
Change cancel_heatup to wait_for_heatup
 2016-07-06 11:25:44 -07:00
Scott Lahteine 160a2be117 Change cancel_heatup to wait_for_heatup 2016-07-06 09:17:50 -07:00
AnHardt 16c83d203b Make use of the good features of a sled probe for all probes. 
Move and extend axis_unhomed test to deploy/stow_z_probe().
Move and extend position store/restore to deploy/stow_z_probe().

Now all kinds of probes can use the 'E' parameter in G29/M48.
Allen key probes can be used now for grid and 3-point levelling.

Deploying the Allen Key probe uses big moves in z direction.
Too dangerous for an unhomed z-axis.
Throw a compile time error when we try to configure an
Allen Key probe homing to z-min and having no other z-min-endstop.
 2016-07-06 04:11:04 +02:00
AnHardt 8555816a11 Generalize and simplify 'triggered when stowed test` 
The `PROBE_IS_TRIGGERED_WHEN_STOWED_TEST` is able to detect if a probe is
successfully deployed/stowed.
It was part of the Allen Key probes code only.
Now the function is generally available.

Currently this test is compulsory for Allen Key probes to not alter the used behaviour
If you want to add the test for an other type of probe simply add
```
#define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
```
to your config.
 2016-07-06 03:56:17 +02:00
AnHardt 5126cce7fd Move Allen Key probe move scripts to their own functions 
There was an hidden extra move after the scripts. This is configurable now.
Added the extra moves to the relevant configs.
 2016-07-06 03:46:40 +02:00
AnHardt 7d063c111c Add a optional feedrate parameter to do_blocking_move() 
Add a optional feedrate parameter to `do_blocking_move()` and its companions.
 2016-07-06 03:46:34 +02:00
Scott Lahteine b114b6a0b3 Save 152 bytes using uint8_t for command indices 2016-07-05 16:29:28 -07:00
Scott Lahteine 0d4ff0c48b Allow the queue to be cleared from within commands 2016-07-05 16:25:20 -07:00
Scott Lahteine c450851401 Merge pull request #4209 from AnHardt/too-high-G28 
Make raise for probe deploy relative in homeaxis()
 2016-07-05 11:07:42 -07:00
AnHardt f799f18388 MBL typo 2016-07-05 18:19:53 +02:00
AnHardt 8b02e68cb6 Make raise for probe deploy relative in homeaxis() 
Make raise for probe deploy relative in homeaxis()
by setting `current_position[axis]` to zero later.
 2016-07-05 10:42:33 +02:00
Scott Lahteine e48502866b Merge pull request #3611 from alephobjects/M108_cancel_heatup 
Introduce M108 cancel wait for heatup/cooldown of the hotend and bed
 2016-07-04 01:19:31 -07:00
Scott Lahteine d70197f514 Merge pull request #4204 from thinkyhead/rc_fix_gcode_t_position 
Additional patches for gcode_T position change
 2016-07-04 01:16:22 -07:00
Scott Lahteine 869b517589 Merge pull request #4205 from thinkyhead/rc_fixup_unit_references 
References to millimeters in code comments need an update
 2016-07-04 01:15:34 -07:00
Scott Lahteine e104b91ea6 References to millimeters in code comments need an update 2016-07-03 20:13:29 -07:00
AnHardt ff91d28a3a Remove wants_to_cool warning 
Remove wants_to_cool warning
 2016-07-04 03:12:11 +02:00
Scott Lahteine c9e536cf87 Additional patches for gcode_T position change 2016-07-03 18:11:02 -07:00
Scott Lahteine f31af61ee2 Fix position adjustment with gcode_T and MBL 2016-07-03 17:44:04 -07:00
lrpirlet 9b42c6b44b apply correction when swtiching from MBL to physical in G28 X 2016-07-03 21:43:42 +02:00
Petr Zahradnik 43ff0ce35f Rewritten FILAMENT_CHANGE_ENABLE feature 2016-07-02 15:34:33 -07:00
AnHardt cb1b31f69b Unconditional do_probe_raise() in probe_pt() 
If Z_RAISE_BETWEEN_PROBINGS is null or undefined the probe is currently not raised by home_offset[Z_AXIS] and zprobe_zoffset.
But when different from 0 is.

If an undefined Z_RAISE_BETWEEN_PROBINGS expands to 0 (and it does) this is the solution.


A similar asymmetry exists with the newly introduced 'short-cut' in G28 - but its the rise before anything is probed - so should not make a difference.
 2016-07-01 15:28:41 +02:00
Scott Lahteine 7ef7843fd4 Merge pull request #4181 from thinkyhead/rc_rename_a_move_func 
Do interpolated moves for Allen Key deploy/stow
 2016-06-30 16:30:09 -07:00
Scott Lahteine da6b0dab5f Use prepare_move_to_destination for Allen Key deploy/stow 2016-06-30 16:09:43 -07:00
Scott Lahteine c42f8fb8dd Rename some movement sub-functions 2016-06-30 15:50:00 -07:00
Scott Lahteine 5e14a528dd Always wait for cooling in M109/M190, break at low temp or if cooling stalls 2016-06-29 14:07:54 -07:00
Scott Lahteine 2e96276bf4 More debug message cleanup 2016-06-27 20:36:19 -07:00
Scott Lahteine dc2c0e5e24 Simpler debug output for deploy/stow 2016-06-27 20:36:18 -07:00
Scott Lahteine bd491818d6 Reduce storage requirements for strings, make some PGM 2016-06-27 20:36:18 -07:00
AnHardt e480ee0054 Further cleanup of G28 for probes 2016-06-27 20:19:51 -07:00
AnHardt 39883d03fc universalize axis_unhomed_error() 2016-06-27 20:19:51 -07:00
AnHardt e616093d4c Simplify dock_sled() 
`dock_sled()` is never called with offset parameter - remove it.
We move x only - so only that needs to be homed. Consequence is - we can home to z-min now with a sled probe!
Feedrates are set and restored in `do_blocking_move()`.
We already checked if the probe is deployed/stowed in deploy/stow_probe.
```
if (z_loc < _Z_RAISE_PROBE_DEPLOY_STOW + 5) z_loc = _Z_RAISE_PROBE_DEPLOY_STOW;
```
makes no sense - remove.
Now the raise is the same for deploy/stow -> move before the if.
Replace the if with a ternary.
Instead writing LOW/HIGH use the boolean `stow` we already have.

There is no reason for not using the sled probe in G29/M48 with 'E'.
It takes a while but works. (tested!)
 2016-06-27 20:19:51 -07:00
Scott Lahteine 829c92f1ba Use Z_RAISE_BETWEEN_PROBINGS with MBL 2016-06-26 15:39:11 -07:00
Scott Lahteine eb1755208f Merge pull request #4153 from thinkyhead/rc_probe_raise_options 
Combine Z raise before/after options
 2016-06-26 15:30:08 -07:00
Scott Lahteine 10da7ac86c Combine Z raise before/after options 2016-06-26 13:56:30 -07:00
Scott Lahteine 3fa631130f Ensure a minimum height before XY move in probe_pt 2016-06-25 19:19:31 -07:00
Scott Lahteine ca184d3d72 Merge pull request #4147 from thinkyhead/rc_fix_M48_raise 
Fix debug output in probe_pt
 2016-06-25 18:15:33 -07:00
Scott Lahteine b4161cbd98 Fix debug output in probe_pt 2016-06-25 17:59:03 -07:00
Edward Patel da88b00585 MBL: Add support for max z endstop 
See https://github.com/MarlinFirmware/Marlin/issues/4088
 2016-06-25 21:58:02 +02:00
Scott Lahteine 7de7552069 Merge pull request #4133 from MagoKimbra/Single_home_axis_delta 
Single home Axis Delta need simple sync_plan_position
 2016-06-23 21:14:22 -07:00
Scott Lahteine 15a6b49f37 Simplified probe_pt (in G30) 2016-06-23 20:25:46 -07:00
Scott Lahteine 6a7045b9bf Remove clean_up_after_endstop_move 2016-06-23 20:23:19 -07:00
Scott Lahteine 2a4f866561 Simplified probe_pt (in G29) 2016-06-23 20:22:28 -07:00
Scott Lahteine 89a2aa026b Simplified probe_pt (in M48) 2016-06-23 19:22:45 -07:00
Scott Lahteine f8530c5d1f Simplified probe_pt function (G28 grid) 2016-06-23 19:09:32 -07:00
Scott Lahteine c376c08042 Simplified probe_pt function (part 1) 2016-06-23 19:00:29 -07:00
Scott Lahteine 9a71b7f8ad Fix debug message for 3-point leveling 2016-06-23 18:17:31 -07:00
Scott Lahteine 550c03a5a9 Drop raise_z_after_probing function 2016-06-23 18:11:54 -07:00
Scott Lahteine bb38c816af Always raise in deploy_z_probe / stow_z_probe 2016-06-23 18:00:20 -07:00
Scott Lahteine 68f3350050 Cleanup M401 / M402 2016-06-23 17:04:41 -07:00
Scott Lahteine 3afda99adf Regular handlers for G31 / G32 2016-06-23 17:04:13 -07:00
Scott Lahteine 6803c8e37e Move Z up before, or down after XY, for "blocking move" 2016-06-23 15:50:13 -07:00
MagoKimbra 570f3bbc07 Single home Axis Delta need simple sync_plan_position 2016-06-23 23:09:47 +02:00
Scott Lahteine 7b2fadd598 Apply some fixes from Andreas 
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
 2016-06-22 17:35:59 -07:00
Scott Lahteine bd01592816 Goodbye MECHANICAL_PROBE 2016-06-22 17:13:33 -07:00
Scott Lahteine 2640d13a9f Simplify initial raise in M48 2016-06-22 16:53:04 -07:00
Scott Lahteine 3763d45656 Return Z position in run_z_probe 2016-06-22 16:52:32 -07:00
Scott Lahteine 1f48b5c30f Pass a raise to probe_pt, not a Z position 2016-06-22 16:40:21 -07:00
Scott Lahteine 6fdd5ba246 Save and restore feedrate in more places 2016-06-22 16:40:20 -07:00
Scott Lahteine fe173c2bc6 Generalized probe raise, use for after probing 2016-06-22 14:44:30 -07:00
Scott Lahteine 7da3080761 Simpler cleanup in G28 / G29 2016-06-22 14:44:30 -07:00
Scott Lahteine 15229d988b Fix compile error for bed matrix in M48 2016-06-22 14:04:46 -07:00
Scott Lahteine c01352cbd5 Add a dependency for z servo macros 2016-06-22 14:04:23 -07:00
Scott Lahteine c3794bd695 Add HAS_PROBING_PROCEDURE conditional 2016-06-22 14:03:22 -07:00
Scott Lahteine bb9c67b4b5 Tweak some feedrate vars 2016-06-22 03:27:31 -07:00
Scott Lahteine 5158bd6e93 Screen out G29 E for sled and allen key, allow single probe 2016-06-22 03:20:33 -07:00
Scott Lahteine ccae92588d Cleanup debug in G28 and G29 2016-06-22 03:20:33 -07:00
Scott Lahteine b4a9d2366c Use a macro for kinematic sync_plan_position 2016-06-22 03:20:33 -07:00
Scott Lahteine bfccf26294 Use sync_plan_position_delta where needed 2016-06-22 03:20:33 -07:00
Scott Lahteine a6b8c67df4 Move probe deploy after setup call in G29 2016-06-22 03:20:33 -07:00
Scott Lahteine e69916d1bd Split up endstop_move functions 2016-06-22 03:20:33 -07:00
Scott Lahteine 0e18a4897b Simpler handling of sled/allen-key in probe_pt 2016-06-22 03:20:33 -07:00
Scott Lahteine 1a92e2ef18 Comment on run_z_probe 2016-06-22 03:20:33 -07:00
Scott Lahteine 68e0e5855e For all probes, at the end of G29 simply raise and stow 2016-06-22 03:20:33 -07:00
Scott Lahteine c3023f8cc5 Make M401/M402 available with HAS_BED_PROBE 2016-06-22 03:20:33 -07:00
Scott Lahteine 9f0c255c69 Show uncorrected position in set_bed_level_equation_3pts 2016-06-22 03:20:33 -07:00
Scott Lahteine 07298ac992 Initialize current_position to home_offset on boot 2016-06-22 03:20:33 -07:00
Scott Lahteine d50539583a Make XY_PROBE_SPEED a general probe option 2016-06-22 03:04:47 -07:00
Scott Lahteine 2798499b71 XY_TRAVEL_SPEED => XY_PROBE_SPEED 2016-06-22 02:45:25 -07:00
Scott Lahteine 88dc543584 Add a macro for XY_TRAVEL_FEEDRATE 2016-06-22 02:23:50 -07:00
Scott Lahteine 3996242e9d Allow Z_MIN_PROBE_REPEATABILITY_TEST solo 2016-06-21 01:56:40 -07:00
Scott Lahteine 26a9cd0b08 Move run_z_probe to earlier block 2016-06-21 01:25:23 -07:00
Scott Lahteine 7f8a2025af Move raise_z_after_probing into earlier block 2016-06-21 01:03:40 -07:00
Scott Lahteine 2530371516 Always disable probe at the end of G29 2016-06-20 16:40:44 -07:00
Scott Lahteine 6aba98e470 Comment on setup_for_endstop_move 2016-06-20 16:40:44 -07:00
Scott Lahteine 04e88d008e Clear up ordering in G30 2016-06-20 16:40:44 -07:00
Scott Lahteine ed75b0ea11 Make clean_up function available for probes 2016-06-20 16:28:45 -07:00
Scott Lahteine 51d52cb52a Make run_z_probe available for any bed probe 2016-06-20 16:02:36 -07:00
Scott Lahteine f6b09cf465 Always use deploy/stow for dock_sled 2016-06-20 15:51:01 -07:00
Scott Lahteine 3b457c2dd3 Use deploy/stow with FIX_MOUNTED_PROBE too 2016-06-20 15:25:01 -07:00
Scott Lahteine 7e9d4a68d4 Always raise Z (if needed) for servo deploy/stow 2016-06-19 20:17:13 -07:00
Scott Lahteine 9beb3f2f5e Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup 
FIL_RUNOUT_INVERTING false by default
 2016-06-19 19:46:14 -07:00
Scott Lahteine f215b30932 Merge pull request #4093 from thinkyhead/rc_probe_without_abl 
Make Z Probe options independent of ABL
 2016-06-19 19:44:25 -07:00
Scott Lahteine 2fd2301928 FILRUNOUT => FIL_RUNOUT 2016-06-19 19:25:26 -07:00
Scott Lahteine de12228758 Make Z Probe options independent of ABL 2016-06-19 18:47:27 -07:00
Scott Lahteine add0032820 Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN 2016-06-19 18:13:33 -07:00
Scott Lahteine 400e13d136 Output a message for SD read errors 2016-06-19 17:14:56 -07:00
Roxy-3D 96b8bcca84 Merge pull request #4081 from thinkyhead/rc_tweaky_m48_tweaks 
Cleanup of M48
 2016-06-18 22:21:16 -05:00
Scott Lahteine b7e3c1bbc4 Tweak M48 output conditions 2016-06-18 16:17:53 -07:00
Scott Lahteine 1dad912b03 Adjust M48 raise / move handling 2016-06-18 15:38:24 -07:00
Scott Lahteine 46d3ef2223 Simplify sample_set probe_pt call in M48 2016-06-18 15:38:23 -07:00
Scott Lahteine a647b05f82 Shrink some debug code in G28 2016-06-18 15:38:23 -07:00
Scott Lahteine 4edf813bde Just-in-time declaration style in M48 2016-06-18 15:38:23 -07:00
Juan Ricardo Gomez Anaya c475291e19 Fix M851 
Minor change missing in the process of standardize the gcode M851
 2016-06-18 15:19:07 -07:00
Scott Lahteine 4e860babbc Allow setting xy_travel_speed for delta leveling also 2016-06-18 01:40:49 -07:00
Scott Lahteine d36d4edd80 Tweak partial homing code 2016-06-18 01:16:50 -07:00
Scott Lahteine d3a05de96e Save and restore feedrate in probe functions 2016-06-18 01:16:26 -07:00
Scott Lahteine defcacc1a9 Delete some obsolete Z servo macros 2016-06-17 18:49:17 -07:00
Scott Lahteine 3a150f07c2 Merge pull request #4073 from thinkyhead/rc_temp_mystery 
Minor tweaks to M109 / M190
 2016-06-17 17:49:50 -07:00
Scott Lahteine bd4ec727e7 Merge pull request #4066 from thinkyhead/rc_M851_with_probe 
Make M851 standard with a bed probe
 2016-06-17 17:32:55 -07:00
Scott Lahteine 692a6e7c91 Merge pull request #4065 from thinkyhead/rc_goodbye_xy_servos 
Remove support for XY servo endstops
 2016-06-17 17:32:08 -07:00
Scott Lahteine de177ba6c9 Minor tweaks to M109 / M190 2016-06-17 17:26:21 -07:00
Scott Lahteine 1000563d80 Make M851 standard with a bed probe 2016-06-17 15:19:42 -07:00
Scott Lahteine f66a194159 Merge pull request #4062 from jbrazio/bugfix/compiler-warnings 
Fixes misc gcc warnings
 2016-06-17 14:23:28 -07:00
Scott Lahteine 1bed392c68 HAS_Z_ENDSTOP_SERVO => HAS_Z_SERVO_ENDSTOP 2016-06-17 14:20:17 -07:00
Scott Lahteine 47ce810f52 Remove support for XY servo endstops 2016-06-17 14:19:17 -07:00
João Brázio d1e5dc6319
Fixes misc gcc warnings 2016-06-17 20:24:24 +01:00
Scott Lahteine ef3bef6b9e Fix feedrate in gcode_T (max_feedrate is mm/s) 2016-06-16 16:03:14 -07:00
MagoKimbra 008d0637dd Fix gcode_T 2016-06-16 09:05:36 +02:00
Scott Lahteine da90bbe0eb Merge pull request #4010 from thinkyhead/rc_toolchange_adjust 
Fixup position adjustment on toolchange
 2016-06-15 21:10:33 -07:00
Scott Lahteine 4b93989a77 MBL Z adjustment on toolchange 2016-06-15 20:49:36 -07:00
Scott Lahteine 9c800d1f8c Position adjustment for bed leveling 2016-06-15 20:49:36 -07:00
esenapaj 44f091a413 Fix for the PR #4023(Add macros to move servos) 
・Add missing ')'
 2016-06-15 22:34:55 +09:00
Scott Lahteine 52ac2a62ee Merge pull request #4013 from thinkyhead/rc_toolchange_no_move 
Use "Tn S1" to change tools without moving
 2016-06-14 20:13:01 -07:00
Scott Lahteine d2a00b74e3 Merge pull request #4004 from thinkyhead/rc_feedrate_in_gcode_T 
Use linear feedrate in gcode_T, not volumetric
 2016-06-14 20:10:08 -07:00
Scott Lahteine 8d8180e028 Parse M905 args in Marlin_main.cpp 2016-06-13 19:25:28 -07:00
Scott Lahteine 2b340f5acb patch LIN_ADVANCE to use code_value_float 2016-06-13 18:54:25 -07:00
Scott Lahteine b708196770 Merge pull request #4032 from AnHardt/bootscreen-delay 
Show bootscreen later
 2016-06-13 18:27:05 -07:00
Scott Lahteine 587de1b6b6 Merge pull request #3676 from thinkyhead/rc_lin_advance_feature 
Advance extrusion algorithm – LIN_ADVANCE
 2016-06-13 18:04:58 -07:00
AnHardt b4fedec0d1 Show bootscreen later 
Init display and show bootscreen later, but init display in `kill()`
to init outputs before the bootscreen delays but being able to display
kill errors.
 2016-06-14 01:59:50 +02:00
Scott Lahteine 4fbe818163 Add macros to move servos 2016-06-12 15:38:30 -07:00
Scott Lahteine 7fb69e24fb Use "Tn S1" to change tools without moving 2016-06-11 15:58:45 -07:00
Scott Lahteine b75e648f2c Clarify names of prepare_move functions 2016-06-11 15:32:49 -07:00
Scott Lahteine 0e2bfd0769 Use linear feedrate in gcode_T, not volumetric 2016-06-10 18:27:01 -07:00
Scott Lahteine 6d62a4ffc8 Patch LIN_ADVANCE for style and forward-compatibility 2016-06-09 21:03:27 -07:00
Sebastianv650 fb8e880734 Add LIN_ADVANCE 2016-06-09 21:03:27 -07:00
Scott Lahteine e2d4919c01 Merge pull request #3991 from thinkyhead/rc_axis_units 
Rename some vars to clarify their relationship to acceleration
 2016-06-09 20:57:01 -07:00
João Brázio 5b5aa1572b Non-blocking buzzer 2016-06-09 20:20:05 -07:00
Scott Lahteine 72c6f2923f axis_steps_per_unit => axis_steps_per_mm 2016-06-09 17:04:51 -07:00
Scott Lahteine cb4704e07a Rename some planner acceleration vars 
- `per_sq_second` => `per_s2`
- `per_sqr_second` => `per_s2`
- `axis_steps_per_sqr_second` => `max_acceleration_steps_per_s2`
 2016-06-09 17:04:50 -07:00
Scott Lahteine 4980ecc1f7 Smaller binary using inline gcode argument getters 2016-06-08 17:03:28 -07:00
Reid Rankin 16212432c9 G20/21 and M149 support, and code_value() refactor 
This is an update of MarlinDev PR #196.

G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.

In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
 2016-06-08 16:51:10 -07:00
Scott Lahteine cca047424d MBL: cel => cell 2016-06-07 19:10:39 -07:00
Scott Lahteine 43947072d5 Merge pull request #3895 from thinkyhead/rc_singlenozzle_part_2 
SINGLENOZZLE: EXTRUDERS versus HOTENDS
 2016-06-04 15:23:17 -07:00
Scott Lahteine d7e4e8e9be Fix a typo in #3955 2016-06-04 02:09:58 -07:00
Scott Lahteine c2362c1b3c Apply Marlin coding standards to MBL class 2016-06-03 21:43:32 -07:00
Edward Patel c06de0f097 MBL: Added keeping MBL active when homing single axises for #3750 2016-06-03 21:42:29 -07:00
Scott Lahteine f2fb66c00d With SINGLENOZZLE only set temperature for the active tool 2016-06-03 17:38:03 -07:00
Scott Lahteine cd441ce652 SINGLENOZZLE: EXTRUDERS versus HOTENDS 2016-06-03 17:38:03 -07:00
Scott Lahteine 32f8300cc6 Merge pull request #3944 from thinkyhead/rc_eboston_lcd_contrast 
Improved LCD contrast handling
 2016-06-03 17:08:41 -07:00
Scott Lahteine 4e13cd3f35 Merge pull request #3955 from MagoKimbra/RCBugFix 
Fix M428 width DELTA & SCARA
 2016-06-03 15:50:37 -07:00
Scott Lahteine 8529122af1 Merge pull request #3946 from thinkyhead/rc_g28_servo_raise_before_stow 
Raise the servo probe before stow outside ABL context
 2016-06-03 15:45:36 -07:00
MagoKimbra f499be084a Fix M428 width DELTA & SCARA 2016-06-03 23:23:23 +02:00
Scott Lahteine 664b299a51 This fix is not DELTA compatible 2016-06-02 17:16:19 -07:00
Scott Lahteine 064efb20e0 Also call clear_command_queue for lcd_sdcard_stop 2016-06-02 17:16:19 -07:00
Scott Lahteine 6277395e1e set_current_position_from_planner() after stepper.quick_stop() 2016-06-02 17:16:19 -07:00
Scott Lahteine 381bc6f0b0 set_position => set_position_mm 2016-06-02 17:16:19 -07:00
Scott Lahteine 9eecb4404b Make raise_z_after_probing null sometimes 2016-06-02 16:56:49 -07:00
Scott Lahteine b3a37b493d Patch G28 servo stow to use Conditionals, raise_z_after_probing 2016-06-02 16:56:49 -07:00
Scott Lahteine efa7209acf Improved LCD contrast handling 
Based on MarlinFirmware/MarlinDev#200 from @eboston
 2016-06-02 16:17:34 -07:00
lrpirlet 3aefa04386 Raise the servo probe before stow outside ABL context 2016-06-01 21:53:45 +02:00
Scott Lahteine d698c89971 Fix bad movement in gcode_T when switching 2016-05-31 19:14:33 -07:00
Scott Lahteine 1a01a44a94 Merge pull request #3936 from thinkyhead/rc_sav_mk1 
Support for SAV_3DGLCD OLED LCD controller
 2016-05-31 18:46:25 -07:00
Scott Lahteine bd97bbc52a Make HAS_LCD_CONTRAST a boolean flag 2016-05-31 11:47:02 -07:00
Scott Lahteine 55ef04a566 Need to call dac_init() in setup() for DAC_STEPPER_CURRENT 
As reported by https://github.com/MarlinFirmware/Marlin/pull/3182#issuecomment-222595488
 2016-05-30 23:35:06 -07:00
Scott Lahteine 360adc6a3b Small reduction in M421 code 2016-05-23 14:25:42 -07:00
Scott Lahteine a4ed988c60 Two index finding functions for MBL 2016-05-23 14:25:42 -07:00
Scott Lahteine cadf441059 Merge pull request #3798 from AnHardt/extend-M421 
Extend M421 with I and J parameters
 2016-05-20 16:17:23 -07:00
AnHardt f5a036510f Extend M421 with I and J parameters 
Extend M421 with I and J parameters
 2016-05-21 00:18:09 +02:00
Edward Patel c7d90dc5ec Add option to configure G28 all axis resting position for MBL 2016-05-20 11:52:27 -07:00
Scott Lahteine 8218558953 Update comments, rename next_ping_ms, followup to #3797 2016-05-19 16:44:57 -07:00
AnHardt e761bdbb4b Remove SF_ARC_FIX from G5 (Cubic B-spline) 
Remove SF_ARC_FIX from G5 (Cubic B-spline).
SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc.
It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.
 2016-05-19 21:00:12 +02:00
AnHardt 2207001333 No compromises for the manage_heater() 
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
 2016-05-19 20:52:11 +02:00
João Brázio e6effb8f35
Implements S1 argument in M999 2016-05-19 00:13:33 +01:00
Scott Lahteine 4041508ffb Function decl. in headers don't need "extern" 2016-05-17 18:35:01 -07:00
Scott Lahteine d66e53c42b Merge pull request #3782 from thinkyhead/rc_home_z_before_g29 
Require homing of Z before G29
 2016-05-17 17:53:56 -07:00
Scott Lahteine 552516ddf5 Merge pull request #3781 from AnHardt/minor-delta-segmenting-speedup 
Minor DELTA segmentation speedup
 2016-05-17 17:17:38 -07:00
Scott Lahteine a28970784c XYZ unhomed 2016-05-17 17:02:53 -07:00
Scott Lahteine a9926b71a4 Require homing of Z before G29 2016-05-17 16:57:12 -07:00
AnHardt 41e9569dbc Minor DELTA segmentation speedup 
Minor DELTA segmentation speedup by pulling calculations out of the loop.
 2016-05-18 01:49:30 +02:00
Scott Lahteine 3016dfe484 Merge pull request #3744 from thinkyhead/rc_bezier_curves 
Add BEZIER_CURVE_SUPPORT — G5 command
 2016-05-17 13:57:38 -07:00
Scott Lahteine d0ac4541d3 Merge pull request #3775 from jbrazio/bugfix/followup-3770 
G29: Report final position back to host when using MBL
 2016-05-17 13:55:26 -07:00
João Brázio b6a3aef297
G29: Report final position back to host when using MBL 2016-05-17 01:27:59 +01:00
esenapaj 95f30529a6 Add stowing process for MECHANICAL_PROBE 2016-05-16 18:12:10 +09:00
esenapaj e2b87f6c85 Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE 2016-05-16 18:12:10 +09:00
Scott Lahteine 754b0152f5 Fix MBL zigzag calls 2016-05-15 12:35:01 -07:00
Scott Lahteine 13175ce7da Fix error checking in M421 2016-05-14 17:12:44 -07:00
João Brázio 8a18c52002 Adds an option to disable print job timer auto start 2016-05-14 15:22:44 -07:00
João Brázio a79267217b M78 now allows stats reset using the S78 argument 2016-05-14 15:22:44 -07:00
Scott Lahteine a713043acd Merge pull request #3749 from esenapaj/patch-3 
Enclose all #error strings by double-quotes
 2016-05-14 15:01:56 -07:00
Scott Lahteine 3cfea3ff12 Merge pull request #3752 from AnHardt/fix-FIX_MOUNTED_PROBE 
G29 missing FIX_MOUNTED_PROBE condition
 2016-05-14 15:00:42 -07:00
Scott Lahteine ddac17a195 Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ) 2016-05-14 14:52:08 -07:00
AnHardt 8a4376d51f Idle during long arcs 
Idle during long arcs
to prevent from watchdog resets during high segmented fast arcs.
 2016-05-14 00:29:13 +02:00
esenapaj 888443ca1e Enclose all #error strings with apostrophes 2016-05-13 21:10:23 +09:00
AnHardt b74af78736 Make arc support (G2/G3) configurable 
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
 2016-05-13 13:27:45 +02:00
AnHardt aef2559bd8 fix-FIX_MOUNTED_PROBE 
Add a forgotten condition
 2016-05-13 12:07:17 +02:00
Scott Lahteine aaeadf0cbd If no "B" parameter given, get 1 byte 2016-05-11 15:30:08 -07:00
Scott Lahteine a6d594665b Print an error on bad i2c request 
Reference: https://github.com/MarlinFirmware/Marlin/pull/3713#issuecomment-218333678
 2016-05-11 15:30:02 -07:00
Scott Lahteine 56dd31ea3c Use code_value_long for potentially large values 
Addressing #3711
 2016-05-10 09:15:31 -07:00
Scott Lahteine 96b71e62c0 Fix dipping on DELTA robots during G29 
- Addressing #3689, et. al.
 2016-05-08 18:28:46 -07:00
Scott Lahteine 15fc93d742 Cleanup and consolidate probe conditionals for clarity 2016-05-08 12:59:43 -07:00
Scott Lahteine 084f6b5b44 Temperature singleton class 2016-05-04 19:42:12 -07:00
esenapaj 605808fe37 Additional follow-up the PR #3631(Encapsulate S... 
Additional follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)

・Change from abort_on_endstop_hit to stepper.abort_on_endstop_hit in endstop.cpp, Marlin_main.cpp, and ultralcd.cpp
・Add include path to cardreader.h and temperature.h in endstop.cpp(for CardReader class and disable_all_heaters())
It fix compilation error when ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED and SDSUPPORT are enabled.

・Change from digipot_current() to stepper.digipot_current() in Marlin_main.cpp
・Change from digitalPotWrite() to stepper.digitalPotWrite() in Marlin_main.cpp
It fix compilation errors when HAS_DIGIPOTSS is enabled.

・Change from microstep_mode() to stepper.microstep_mode() in Marlin_main.cpp
・Change attribute of microstep_mode() from private to public in stepper.h
・Change from microstep_readings() to stepper.microstep_readings() in Marlin_main.cpp
・Change from microstep_ms() to stepper.microstep_ms() in Marlin_main.
It fix compilation errors when HAS_MICROSTEPS is enabled.
 2016-05-03 18:28:37 +09:00
esenapaj a82cfcff2d Follow-up the PR #3631(Encapsulate Stepper, ... 
Follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)

plan_bed_level_matrix -> planner.bed_level_matrix in multi extruders section of Marlin_main.cpp
It probably fix the Issue #3658(plan_bed_level_matrix not declarate).

movesplanned() -> planner.movesplanned() in ADVANCED_OK section of Marlin_main.cpp
It fix compilation error when ADVANCED_OK is enabled
 2016-05-02 22:04:26 +09:00
Scott Lahteine 462a8a951e A little extra gcode_T spacing 2016-04-30 17:26:50 -07:00
Scott Lahteine 96f51f400f Planner singleton class 2016-04-30 17:26:50 -07:00
Scott Lahteine 5076d12344 Localize M119 in Endstops class 2016-04-30 17:26:50 -07:00
Scott Lahteine 5e4e535ce8 Stepper and Endstops as singleton objects 2016-04-30 17:26:50 -07:00
Scott Lahteine 6d3e4e1f8f Prevent stuck M109/M190 when target is changed 2016-04-30 17:03:54 -07:00
Scott Lahteine c3ef9993b9 Merge pull request #3625 from jbrazio/feature/print-counter 
Print job statistics
 2016-04-29 15:31:14 -07:00
João Brázio 1491d682fb
Miscellaneous tweaks on PrintCounter 2016-04-29 23:13:59 +01:00
João Brázio d6cfcc9c8b
Added new G-Code: M78 2016-04-29 23:13:58 +01:00
Scott Lahteine f4706bb90e Keepalive not needed while waiting for temperatures 2016-04-28 21:11:15 -07:00
Blue-Marlin e58e281473 Fix feedrate after toolchange 
The fix is simple. Most changes are because of changed indendation,
bacause of leaving early for wrong tool number
 2016-04-27 00:57:45 +02:00
Scott Lahteine ec82e1e05d Merge pull request #3616 from thinkyhead/rc_fixup_some_movement 
General cleanup around high level move functions
 2016-04-25 20:23:38 -07:00
Scott Lahteine abeab792cb General cleanup around high level move functions 
- Use new `DEBUG_POS` macro for `DELTA` debug
- Neaten up `prepare_move` a smidgen
- Remove an old commented `prepare_move()` line
 2016-04-25 20:02:24 -07:00
Scott Lahteine 68d0347e67 Call report_current_position after M206 / M428 2016-04-25 18:43:28 -07:00
Scott Lahteine dcb4cdaa9e Call report_current_position instead of gcode_M114 directly 2016-04-25 18:43:27 -07:00
gralco 840e13f664 Introduce M108 cancel heatup for the hotend and bed 
This G-code is asynchronously handled in the get_serial_commands() parser.
 2016-04-25 08:33:33 -06:00
João Brázio a901555da4 Moved G29 debug output before matrix.set_to_identity() 2016-04-22 20:57:22 -07:00
Scott Lahteine 1caa2628da Use sync_plan_position_e function elsewhere 2016-04-20 13:02:19 -07:00
Scott Lahteine c7df961144 Fix G92 so it only sets the plan position once 2016-04-20 13:01:58 -07:00
Scott Lahteine 3db5a75f30 Merge pull request #3568 from thinkyhead/rc_various_fixes 
General code cleanup, improved naming, etc.
 2016-04-19 20:53:38 -07:00
Scott Lahteine ac69fad96d lowercase "stop" function 2016-04-19 19:43:54 -07:00
Scott Lahteine 39ee9c526b setTargetedHotend => get_target_extruder_from_command 2016-04-19 19:43:54 -07:00
Scott Lahteine cafa8b8ce3 Rename filament runout items 2016-04-19 19:43:39 -07:00
Scott Lahteine 27b2e2e786 Document some variables 2016-04-19 19:43:39 -07:00
Scott Lahteine a4062a47ac Rename baricuda variables 2016-04-19 19:43:38 -07:00
Scott Lahteine 78747b1328 min_pos/max_pos => sw_endstop_min/sw_endstop_max 2016-04-19 19:43:38 -07:00
Scott Lahteine ba84d8d091 Allow setting PIDTEMP and PIDTEMPBED together or apart 2016-04-19 18:09:29 -07:00
Scott Lahteine a26d70e932 Apply indentation to gcode_M303, PID_autotune 2016-04-18 19:04:45 -07:00
Scott Lahteine ba66336503 Output error for disabled M303 2016-04-18 19:03:45 -07:00
Scott Lahteine 5905ec5ba8 Merge pull request #3541 from thinkyhead/rc_mbl_one_last_lift 
Add a final lift, if configured, in Manual Bed Leveling
 2016-04-17 17:20:02 -07:00
Jeff K 90c49f5a14 Fixed invalid addressing (overflow) of position_shift / software endstops 
Signed-off-by: Jeff K
 2016-04-17 19:28:50 -04:00
Scott Lahteine c242bee449 Add a final lift, if configured, in Manual Bed Leveling 2016-04-17 00:12:46 -07:00
Scott Lahteine 837df6108c Fix borked set_bed_level_equation_lsq 2016-04-16 20:35:42 -07:00
Scott Lahteine 4b75b11a53 Wrap defines in parentheses in configs, M48 2016-04-16 18:21:09 -07:00
Scott Lahteine 234987ee2f Fix MBL lift 2016-04-16 14:17:06 -07:00
Scott Lahteine e0830bf8f1 Don't use LCD alert unless error or alert level is reset later 2016-04-15 18:48:49 -07:00
Scott Lahteine a8e4d7c135 Merge pull request #3477 from alephobjects/BedTempHysteresis 
Implementation of M190 bed temp hysteresis
 2016-04-15 16:20:58 -07:00
esenapaj 5ecd75eeb3 Fix for PR #3502(General cleanup of arc code) 2016-04-16 07:22:07 +09:00
gralco 8ec8d59df8 Use #if TEMP_RESIDENCY_TIME > 0 rather than #ifdef TEMP_RESIDENCY_TIME 2016-04-15 11:20:32 -06:00
Scott Lahteine 6e52b0b723 Merge pull request #3504 from thinkyhead/rc_fix_debugging 
Fix debugging of vector_3
 2016-04-14 19:08:30 -07:00
Scott Lahteine 88367a37f7 Merge pull request #3227 from thinkyhead/rc_home_offsets_and_limits 
Relating current_position, min_pos, max_pos, and home_offset
 2016-04-14 18:50:43 -07:00
Scott Lahteine b20bf1826d Fix debugging of vector_3 2016-04-14 18:45:26 -07:00