Alexander Gavrilenko
3c47e1b4d1
Support Black STM32F407VET6 with RAMPS-like shield ( #13524 )
2019-04-05 15:30:19 -05:00
drzejkopf
b1f739e27b
CR10_STOCKDISPLAY support in Bigtreetech SKR ( #13516 )
2019-03-29 14:19:18 -05:00
Alexander Amelkin
e40636a7c1
Replace digitalPinHasPWM with HAS_TIMER ( #13520 )
2019-03-29 12:21:14 -05:00
Yannik Sembritzki
0d3ea59bcf
Add pins for Dual Z UART on SKR 1.3 ( #13474 )
...
Fix #13470
2019-03-24 20:09:00 -05:00
Scott Lahteine
144018736a
Use USES_Z_MIN_PROBE_ENDSTOP
2019-03-18 16:58:31 -05:00
InsanityAutomation
5b2c37d6c1
Followup to BLTouch ( #13422 )
2019-03-18 16:31:11 -05:00
Scott Lahteine
b376c7e374
Group DISABLED items
2019-03-17 07:56:35 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Scott Lahteine
ad8b82d054
Fix KILL_PIN assignment for MKS_MINI_12864
...
According to #13397
2019-03-15 19:20:40 -05:00
Scott Lahteine
4555ae448f
Fixups for ESP32
2019-03-13 05:32:33 -05:00
Scott Lahteine
fa11427ec6
Remove obsolete LCD_CONTRAST
2019-03-11 03:33:07 -05:00
Marcio Teixeira
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
2019-03-09 14:20:37 -06:00
Scott Lahteine
44571775bd
Further support for 6 extruders
2019-03-07 01:00:56 -06:00
Scott Lahteine
893ee68b52
Clean up trailing whitespace
2019-03-06 01:02:43 -06:00
Tobias Frost
56fdcf93d1
Disallow SD_DETECT_INVERTED with FYSETC F6. ( #13307 )
2019-03-05 06:45:28 -06:00
Scott Lahteine
d71dc5cf42
Fix for Ender 4 fan/case light pin
...
See #12731
2019-03-03 07:43:27 -06:00
Anthony Rich
7640b328df
Support for Tronxy X5S 2e ( #13297 )
2019-03-03 07:41:05 -06:00
Scott Lahteine
fa0d909dd3
Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3
...
See #13267
2019-03-03 00:27:47 -06:00
Vasily Evseenko
71773b128d
Fix stepper use before init. Add Ultimaker2+ Extended clone config ( #13284 )
2019-03-02 17:29:02 -06:00
Scott Lahteine
2f1e1dcb42
Gradual step towards EXTRUDERS 0 support
2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
2019-03-01 00:27:45 -06:00
Msq001
5b7ad3a5a0
Fix SKR onboard TF card CS pin ( #13272 )
2019-02-28 19:41:19 -06:00
Msq001
f8a39919fa
Add Bigtree SKR 1.3 board ( #13267 )
...
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
2019-02-26 21:30:00 -06:00
Bob Kuhn
ddbe4cfa20
Printrboard G2 support ( #13116 )
2019-02-26 21:03:13 -06:00
Scott Lahteine
a79b9bbe6b
Cleanup whitespace, add a const
2019-02-26 17:49:14 -06:00
Chris Pepper
88cc1d1a31
Fix Preprocessor syntax in Re-ARM pins file ( #13247 )
2019-02-24 01:36:58 +00:00
Scott Lahteine
15aa932aa6
HAL for Linux ( #13146 )
2019-02-22 19:09:10 -06:00
kwalters3
5eb82ca6a8
Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C ( #13223 )
2019-02-22 19:08:36 -06:00
Thomas Moore
9f5e4e5ad8
Update LPC1769 Pins Files ( #13183 )
2019-02-21 00:54:05 -06:00
Greg Nutt
608a6810e7
Fix DOGLCD_A0 pin in pins_Smoothieboard.h ( #13217 )
2019-02-20 18:08:49 -06:00
Scott Lahteine
44c22e3935
Provide a default MAX6675_SS_PIN for ReARM
...
See #8010
2019-02-20 05:06:06 -06:00
InsanityAutomation
33a6d52965
Fix a RAPTOR2 pin conflict ( #13205 )
2019-02-19 14:42:02 -06:00
Scott Lahteine
18458ec42b
Error in Smoothieboard for unsupported display
2019-02-19 14:17:33 -06:00
Andy Shaw
84fc400aba
Update BIQU SKR V1.1 pins, add TMC2130 settings ( #13166 )
...
* Remove untested displays add TMC2130 configs.
* Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.
2019-02-14 16:43:56 -06:00
Scott Lahteine
7cf9b93f26
Add HAS_FILAMENT_SENSOR ahead of 12962
2019-02-12 20:13:20 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Simon Jouet
5cd0fa3ce1
Basic GPIO expander using the ESP32 I2S peripheral ( #12959 )
2019-02-10 05:40:31 -06:00
Scott Lahteine
43b29c093b
Update pinsDebug_list.h with XY PWM pins
2019-02-10 05:13:05 -06:00
Scott Lahteine
95d3f3953a
DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL
2019-02-08 14:54:34 -06:00
Scott Lahteine
870757aa17
Tweaks to pins_GT2560_V3.h
2019-02-04 22:52:50 -06:00
Psycho
3c88cac2e9
Velleman Vertex Delta pins ( #13072 )
2019-02-04 00:15:08 -06:00
Scott Lahteine
ca1be02bf0
Tweak some pins formatting
2019-02-04 00:06:41 -06:00
InsanityAutomation
68bbac207e
Update pins_FORMBOT_TREX3.h ( #13058 )
2019-02-01 18:06:02 -06:00
raTmole
988b5aa4e6
Update GT2560 V3 pins ( #13036 )
2019-01-30 21:10:56 -06:00
Scott Lahteine
159d7eefda
New boards entry for the A20M
2019-01-28 21:08:20 -06:00
Thomas Moore
02ab66fca3
Update Cohesion3D Pins Files ( #13027 )
2019-01-27 23:11:33 -06:00
Scott Lahteine
0f07ba4f09
Tweak some comments
2019-01-23 20:18:13 -06:00
Bob Kuhn
7c1a5e3c47
Fix TEMP_TIMER in pins_STEVAL.h ( #12994 )
2019-01-23 19:34:39 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
Scott Lahteine
6453b82a5e
Clean up trailing whitespace
2019-01-23 15:57:01 -06:00
Gert-Jan Rodenburg
bb30927549
Fix pins for ZONESTAR_LCD with Zonestar ZRIB ( #12956 )
2019-01-20 23:52:51 -06:00
lanserge
c2cf8ffa82
Add support for Arduino DUE Shield Kit ( #12950 )
2019-01-19 23:43:32 -06:00
chrisly42
99e5e8362f
Rapide Lite 200 config, pins_RL200 RUMBA clone ( #12848 )
2019-01-19 20:19:14 -06:00
Scott Lahteine
6411680364
Update some pins spacing
2019-01-19 19:21:52 -06:00
Scott Lahteine
712e23c383
Fix up some whitespace
2019-01-17 18:05:36 -06:00
Bob Kuhn
d08f27e27b
Add support for STEVAL 3DP001V1 ( #12894 )
2019-01-15 18:59:36 -06:00
mikeshub
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
Chris Barr
1d33784bf9
Add RUMBA32 Board ( #12856 )
2019-01-10 19:34:31 -06:00
Karl Andersson
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
2019-01-10 19:01:31 -06:00
jmz52
d372e7e477
SDIO support for STM32F1 ( #12782 )
2019-01-04 13:38:07 -06:00
luxflow
7f244f9b9c
Update LPC SD pins for BIQU SKR ( #12767 )
...
(Exactly matching the Azteeg X5 MINI Wifi)
2019-01-03 10:44:00 -06:00
jmz52
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
Scott Lahteine
2aaa681dea
Remove unused Cheaptronic pins
2019-01-03 08:58:55 -06:00
Ludy
74c47803f7
Add VORON printer ( #12705 )
2019-01-03 06:27:03 -06:00
petieken
d9cf5e4883
Update pins_BIQU_SKR_V1.1.h ( #12758 )
2019-01-02 13:50:05 -06:00
Scott Lahteine
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
2018-12-30 15:38:20 -06:00
Alain Martel
44ed34475b
Add MKS BASE 1.4 pins ( #12770 )
2018-12-30 10:40:22 -06:00
Msq001
f8c5d31864
Bugfix 2.0.x add motherboard pins define ( #12689 )
...
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
2018-12-27 10:52:35 -06:00
InsanityAutomation
b7a8dcc35d
Update Formbot T-Rex 3 pins ( #12662 )
2018-12-20 17:32:39 -06:00
Ludy
f7127c44f8
Wanhao Duplicator i3 Plus pins create ( #12701 )
2018-12-20 17:30:36 -06:00
jmz52
33abb86b7e
Add support for MKS Robin board ( #12650 )
...
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
2018-12-20 17:23:27 -06:00
Ludy
33f3c75213
GTM32 Pro VB FAN-PIN correction ( #12666 )
2018-12-20 16:42:15 -06:00
Ludy
3829d6ccf8
FYSETC F6 13 - E2_SERIAL_TX_PIN correction ( #12667 )
2018-12-20 16:11:33 -06:00
Kadah
d35dcafa3d
Added MKS MINI 12864 support to FYSETC F6 V1.3 ( #12656 )
2018-12-20 16:10:49 -06:00
Ludy
97de9d54a5
Fix broken pins file include ( #12617 )
2018-12-09 19:06:03 -06:00
Scott Lahteine
6cf8d40f41
Fix some serial echos of pin states
2018-12-09 02:38:32 -06:00
Scott Lahteine
7d15854514
Add Z_MIN_PROBE_PIN to MKS SBASE pins
2018-12-08 15:31:59 -06:00
teemuatlut
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
2018-12-07 15:34:21 -06:00
Scott Lahteine
3c58b16c9f
Move stepper enable/disable to stepper_indirection.h ( #12562 )
2018-11-30 12:48:46 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type ( #12557 )
2018-11-29 16:58:58 -06:00
InsanityAutomation
dec721c52b
Add Formbot Raptor2 and Raise3D pins ( #12532 )
...
* Add Formbot Raptor2 board
* Add Raise3D Rumba board
2018-11-25 19:56:06 -06:00
Scott Lahteine
0a638cc022
Adjust Formbot Raptor pins
2018-11-25 18:35:45 -06:00
Marcio Teixeira
7109dadd21
Additional pin definitions for Archim 2 ( #12500 )
...
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
2018-11-22 01:07:02 -06:00
Scott Lahteine
b738972e69
General cleanup of Re-ARM pins
2018-11-21 19:00:49 -06:00
Ludy
1f93d2bcf7
Fix LCD compile error, etc. ( #12472 )
2018-11-18 20:39:49 -06:00
Scott Lahteine
9d13f07d09
GTM32 Pro VB changes from Markku Sinisalo
2018-11-18 19:56:38 -06:00
Nils Hasenbanck
779b2709ec
Change temperature pin order for RemRam V1 ( #12458 )
...
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
2018-11-17 16:51:06 -06:00
Ph0non
984c4ba8c7
Enable SD Card on RepRap Display and RADDS ( #12446 )
...
* Enable SD Card on RepRap Display and RADDS
Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
2018-11-17 06:59:40 -06:00
Mateusz Krawczuk
ca21ac6b9b
Support two MAX6675 thermocouples ( #8686 )
2018-11-16 18:20:33 -06:00
Scott Lahteine
edfd106bc5
Rejigger Filament Runout class ( #12428 )
2018-11-14 11:45:57 -06:00
Scott Lahteine
f4c128ecaa
Move RRW keypad code to a common method ( #12429 )
2018-11-14 06:00:21 -06:00
Scott Lahteine
ebf585b673
Fix an old sanity check
2018-11-14 01:15:35 -06:00
Ryan
052d102ded
UltiMachine Archim 1 support ( #12404 )
2018-11-14 00:27:39 -06:00
Scott Lahteine
664e20754d
Clean up pins files
2018-11-14 00:23:33 -06:00
Scott Lahteine
4ed6397e5d
More comprehensive NO_LCD_MENUS ( #12367 )
2018-11-09 00:07:16 -06:00
Scott Lahteine
9c8f083d6c
Extend pins errors to include the processor
2018-11-08 22:25:59 -06:00
Scott Lahteine
147e270208
Restore GTM32_PRO_VB temp and heater pins
...
Undo #12345
2018-11-06 21:41:30 -06:00
Phr3d13
a813900fce
Add Geeetech Rostock 301 config, update GTM32 Pro VB pins ( #12345 )
2018-11-05 22:42:06 -06:00
Scott Lahteine
c536ee1122
Clean up bq Zum Mega 3D pins
2018-11-05 22:38:20 -06:00
Scott Lahteine
0c85869c26
Clean up file endings
2018-11-04 18:30:10 -06:00
Scott Lahteine
3c21483c88
Provide DOGLCD SPI pins for MKS SBASE + VIKI
2018-11-04 16:20:22 -06:00
Scott Lahteine
9c0e05552e
Suppress some compile warnings
2018-11-04 15:25:31 -06:00
Karl Andersson
176654791e
Use board-specific or platform SPI pins in HAL_STM32 ( #12323 )
2018-11-04 15:03:45 -06:00
Scott Lahteine
608be966d7
Add servos to pins_FYSTEC_F6_13.h
2018-11-04 06:10:35 -06:00
InsanityAutomation
ad60f0691c
Add Creality3D RAMPS pins definitions ( #12229 )
2018-10-26 16:09:04 -05:00
Scott Lahteine
5580773191
Use FastIO, sanity-check LPC SD options, apply formatting ( #12231 )
2018-10-26 15:23:02 -05:00
Hannes Brandstätter-Müller
6ee2af5e2d
Simplify pins_TRIGORILLA_14.h ( #12162 )
2018-10-21 03:23:20 -05:00
Scott Lahteine
b381cad399
Clean up trailing whitespace
2018-10-19 15:27:17 -05:00
Karl Andersson
4eb798dbdc
Add support for Arm'ed (STM32F4) board ( #12147 )
2018-10-19 14:50:52 -05:00
Scott Lahteine
a81763c237
Pins E sanity check tweak
2018-10-18 18:48:23 -05:00
Michael Triffon
eded90bf87
Updated Azteeg X5 Mini Wifi pins for onboard SD ( #12133 )
2018-10-18 11:52:55 -05:00
Chris Pepper
3c13c9e3e9
[LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support ( #12129 )
2018-10-18 11:26:50 -05:00
Nils Hasenbanck
0519ef0802
Update pins for final RemRam v1.3 board ( #12125 )
2018-10-17 11:13:38 -05:00
Karl Andersson
8b5e51c9aa
STM32F4xx modifications for HAL_STM32 ( #12080 )
2018-10-16 06:42:41 -05:00
Christopher Pepper
42fb7c14b0
Update the sdcard usb sharing config and apply to Re-ARM
2018-10-14 18:43:48 +01:00
Andy Shaw
870bfd08f5
usb and sdcard sharing improvements
...
* Add traceback after watchdog timeout
Add the cpability to perform a traceback following a watchdog timeout.
* Enhanced hardware SPI
Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.
* Make flash emulation of eeprom the default
Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.
* Allow sharing of SD card
SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.
New configuration options to allow usage of the SD card to be specified.
* Fix problem with hardware SPI pins
2018-10-14 18:43:48 +01:00
Roxy-3D
25b980dddb
Remove erroneous Pin 12 definition
...
There is no switchable Power Supply. Don't put it on Pin 12.
(Pin 12 is actually FAN1)
2018-10-12 13:45:04 -05:00
Scott Lahteine
1407afad73
Move SENSITIVE_PINS to its own file
2018-10-11 01:10:11 -05:00
Scott Lahteine
45e738876a
Add stepper MS3 support
...
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
2018-10-11 01:10:11 -05:00
Hannes Brandstätter-Müller
a3e8cb1e44
[2.0.x] Ender-4 small improvements in Configuration ( #11843 )
2018-10-09 20:58:22 -05:00
Marcio Teixeira
ec9aa4f468
[2.0.x] Miscellaneous fixes ( #12039 )
...
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
2018-10-08 18:14:52 -05:00
Marcio Teixeira
906a24fa81
Extensible user interface API ( #11193 )
2018-10-08 15:44:05 -05:00
teemuatlut
c447d75916
Add support for TMC2660 ( #11998 )
2018-10-06 17:18:10 -05:00
Scott Lahteine
0fcdfdeed6
Followup to #12017
2018-10-06 13:23:58 -05:00
Phr3d13
acac2adfc8
Add support for MeCreator2 ( #12017 )
2018-10-06 12:26:49 -05:00
Scott Lahteine
1358bd9319
Make MAX_EXTRUDERS always 6
2018-10-03 11:32:19 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core ( #11750 )
2018-10-03 03:26:07 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers ( #11977 )
2018-09-30 23:44:33 -05:00
Mitch Roote
d016b572e3
[2.0.x] Add pin configuration for Fysetc F6 ( #11932 )
2018-09-27 19:20:19 -04:00
Victor Tseng
eeab4141db
[2.0.x] Anycubic Trigorilla 14 pins tweak ( #11869 )
2018-09-27 16:06:21 -04:00
InsanityAutomation
cb9dc56630
Add GT2560 v3 support ( #11914 )
2018-09-27 15:13:15 -04:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET ( #11916 )
2018-09-24 21:46:56 -04:00
InsanityAutomation
1104054d73
2.0 IDEX Independent z offset and other fixes ( #11862 )
...
* Add Formbot Raptor board
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Add a second Z probe Z offset
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Modify method to utilize live adjustment of hotend z offset
Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems
* Move config item and catchup other code to current method
2018-09-24 09:40:48 -05:00
Scott Alfter
140caf99b8
E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 ( #11865 )
2018-09-18 22:24:20 -05:00
Scott Lahteine
09a2bee8aa
Support more filament runout sensors in M119 ( #11851 )
2018-09-17 03:27:13 -05:00
Roxy-3D
0780913848
IDEX Improvements ( #11848 )
2018-09-17 01:06:22 -05:00
Scott Lahteine
1718eff54a
Code changes supporting up to 6 extruders
2018-09-16 22:32:53 -05:00
Scott Lahteine
d948c6e867
RADDS Extension Board V3 support
2018-09-16 22:22:35 -05:00
Holger Müller
1a6f2b29b8
Add support for Triple-Z steppers/endstops
2018-09-16 00:35:58 -05:00
Scott Lahteine
8584d3697d
Fix servo count define conflict
...
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
2018-09-11 16:20:31 -05:00
Scott Lahteine
fe9f088d60
[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 ( #11730 )
2018-09-10 21:25:40 -05:00
Scott Lahteine
b6aae2b322
Tweak RAMPS_FD_V1 pins
2018-09-10 15:43:03 -05:00
Scott Lahteine
7391e23332
Fix RigidBoard FAN_PIN collision
2018-09-10 05:29:00 -05:00
Roxy-3D
e3aac59637
Create pins_FORMBOT_TREX3.h
2018-09-06 09:46:23 -05:00
Roxy-3D
f580247581
Create pins_FORMBOT_TREX2.h
2018-09-06 09:45:29 -05:00
Roxy-3D
073857646b
seperate the T-Rex2 and T-Rex3 support
2018-09-06 09:43:43 -05:00
Roxy-3D
fe4fc2883b
Add support for Formbot T-Rex3
2018-09-06 09:41:59 -05:00
Roxy-3D
9651ceb36b
Correct spelling of #endif
2018-09-05 10:46:08 -05:00
Scott Lahteine
86ee74731e
Comment for RADDS + RRDFGSC
2018-09-05 05:45:17 -05:00
Kevin
ae1271b2ae
RADDS: Update Full Graphic Display Pins ( #11731 )
2018-09-05 03:51:54 -05:00
