zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
19736 commits 1 branch 0 tags 156 MiB
Commit graph

956 commits

Author SHA1 Message Date
Scott Lahteine 7674befa47 DOGM SPI delay is less common 2020-03-09 17:46:49 -05:00
Scott Lahteine 64d092935b
More useful ENABLED / DISABLED macros (#17054) 2020-03-07 22:20:41 -06:00
Scott Lahteine 20f93404a7 Add / correct comments 2020-03-07 02:16:17 -06:00
Scott Lahteine 0578e9b16e Move SENSORLESS_PROBING to the probes section 
Fixes a bug with HAS_BED_PROBE not being set before use.
 2020-03-05 11:05:11 -06:00
thisiskeithb efc739a880
Use BED_MAXTEMP for PTC_MAX_BED_TEMP (#17061) 2020-03-03 14:22:28 -06:00
Scott Lahteine 3a07b4412d
Asynchronous M114 and (R)ealtime position option (#17032) 2020-03-02 21:52:53 -06:00
InsanityAutomation 552f7a91d0
Default on/off for Power Loss Recovery (#17051) 2020-03-02 16:07:53 -06:00
Scott Lahteine b1a50d54e2 HAS_TRINAMIC => HAS_TRINAMIC_CONFIG 2020-03-02 12:04:36 -06:00
Scott Lahteine 832951ec44
Case-insensitive g-code option (#16932) 2020-02-26 09:23:55 -06:00
Scott Lahteine 5b438fb20d HAS_SDCARD_CONNECTION is more obsolete 2020-02-25 22:30:30 -06:00
InsanityAutomation 3e685777a8
Fix LCD cutter/bed icons overlapping (#16956) 2020-02-25 03:07:36 -06:00
InsanityAutomation 3a6f776c4b
Update POWER_LOSS_PIN comment (#16957) 2020-02-24 23:51:10 -06:00
Scott Lahteine 64a81f887a
EXPERIMENTAL integrated BABYSTEPPING (#16829) 2020-02-15 21:42:28 -06:00
George Fu 63dd0f249d
Fysetc S6 pins / LCD updates (#16830) 2020-02-14 07:18:57 -06:00
Scott Lahteine 3bef7a4450
Add g-code quoted strings, improve stream code (#16818) 2020-02-10 14:52:15 -06:00
Scott Lahteine 18a7276909 Revert "Coolstep for TMC2130, 2209, 5130, 5160" 
Reverting #16790 as not ready for primetime.
 2020-02-09 21:22:26 -06:00
InsanityAutomation cc1ff27256 Bump config version to 020004 (#16816) 2020-02-09 12:15:02 -06:00
Fabio Santos 894762259b
Coolstep for TMC2130, 2209, 5130, 5160 (#16790) 2020-02-08 21:01:57 -06:00
Scott Lahteine 793939a365 Upgrade an ifdef 2020-02-04 08:46:37 -06:00
Scott Lahteine 7bf2190f03 Fix CALIBRATION_GCODE pin handling 2020-02-04 08:32:43 -06:00
felixstorm 38a9706e16
Keep secure credentials in a separate config file (#16773) 2020-02-03 23:29:01 -06:00
Scott Lahteine bfad23d3e2 (c) 2020 2020-02-03 08:00:57 -06:00
InsanityAutomation e58d1bf974
G34 automatic point assignment (#16473) 2020-02-01 04:50:44 -06:00
Scott Lahteine e8ed4329ea Cleanup of old includes, add comments 2020-01-29 22:41:18 -06:00
Hans007a e2eef1256a G60/G61 Position Save/Restore (#16557) 2020-01-26 23:19:05 -06:00
Scott Lahteine 1d1dc8e339 More 8 extruder defines 2020-01-26 03:24:54 -06:00
Scott Lahteine 86c18ea6e0 Bring configs and drivers.h up to date 2020-01-24 23:17:52 -06:00
Ryan b7f86bffd5 Arc segment radius scaling (#16551) 2020-01-21 02:53:26 -06:00
InsanityAutomation 79810b7fcb G12 defaults per tool. Event G-code for post-toolchange (#16554) 2020-01-21 02:51:23 -06:00
Scott Lahteine 84c874c53b Tweak some config spacing 2020-01-21 02:43:34 -06:00
0r31 b57ef4b261 Override for LPC1768 u8g/digipot I2C master ID (#16622) 2020-01-20 20:09:16 -06:00
InsanityAutomation 0fcf2b1110 Quad Z stepper support (#16277) 2020-01-19 23:35:07 -06:00
tompe-proj a338dce83f PINDA v2 temperature sensor / compensation (#16293) 2020-01-17 17:16:45 -06:00
Dennis 2d7f94cae1 Adjustable ADC debounce delay (#16264) 2020-01-15 18:06:03 -06:00
gjdodd 7481563bd9 Nikon IR support for time lapse photos (#16539) 2020-01-15 17:59:41 -06:00
Scott Lahteine ea7363a8f4 Update more configs 2020-01-14 18:48:29 -06:00
Bob Kuhn 1ad53cee1f Improved STMicro L64XX stepper driver support (#16452) 2020-01-13 18:47:30 -06:00
Luc d854c8fa5f ESP3d integration for ESP32 (#16515) 2020-01-10 17:22:41 -06:00
Jamie 36d08f8ad3 Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs (#16510) 2020-01-09 04:48:00 -06:00
Jamie 9b970cf12f Add option to invert joystick axes (#16466) 2020-01-05 02:01:05 -06:00
George Fu e593da1c23 Update and fix DGUS (#16317) 2020-01-03 21:00:44 -06:00
rado79 0be8b22d3c Add FILAMENT_UNLOAD_PURGE_FEEDRATE (#16372) 2020-01-01 21:56:58 -06:00
Scott Lahteine 00c83e9ca6 Update comments re: NOZZLE_AS_PROBE 2020-01-01 19:41:23 -06:00
Scott Lahteine b49a0e39d5 HOME_USING_SPREADCYCLE is obsolete 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2019-12-19 16:02:57 -06:00
Scott Lahteine 53f77dfadf Remove obsolete TMC2209 comment 2019-12-19 15:56:52 -06:00
Jason Smith 1bad8f1b17 Improve pulse timing and step reliability (#16128) 2019-12-19 02:38:48 -06:00
Moshi Binyamini dcdaa2025f Sanity-check Z_STEPPER_AUTO_ALIGN coordinates (#16231) 2019-12-19 00:59:01 -06:00
Scott Lahteine 303ddb862a Tweak some config names 2019-12-12 22:18:04 -06:00
haschtl ff6518c0a8 Add PID_FAN_SCALING option (#15585) 2019-11-26 03:34:43 -06:00
Scott Lahteine 441e822fb3 LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE 2019-11-23 17:04:17 -06:00
BigTreeTech ab8b24fdba Power Loss Recovery with a UPS (#15943) 2019-11-20 17:40:21 -06:00
Scott Lahteine aa93e1f21a Update TMC_ADV examples 2019-11-15 02:15:10 -06:00
Roman Moravčík e110f5abce M73 R : Set Remaining Time (#15549) 2019-11-12 19:36:54 -06:00
Scott Lahteine 5e5045c4ee Touch UI finishing touches 2019-11-10 18:52:53 -06:00
danym21 28e1614c2e Add Sensorless Homing current (#15690) 2019-11-10 18:45:06 -06:00
LinFor 48b7a1e66e Allow non-zero "fan off" PWM value (#15709) 2019-11-10 16:33:56 -06:00
Scott Lahteine 288af0ddf6 Whitespace 2019-11-01 15:39:05 -05:00
studiodyne f139642e0f XY/Z Babystep Multiplicators (#15691) 2019-10-28 16:44:17 -05:00
Scott Lahteine 7a342ecb93
Show Total E during print (#15703) 2019-10-27 17:49:27 -05:00
Scott Lahteine 93f0012959
Cancel Objects - As seen at ERRF2019 (#15590) 2019-10-24 15:35:40 -05:00
Scott Lahteine 2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time (#15578) 2019-10-24 14:00:59 -05:00
Scott Lahteine ccf61eca84 Fix diplay elaspsed 2019-10-24 13:48:27 -05:00
Luu Lac 0b0b822671 Add note: TMC2209 requires stealthChop for Sensorless Homing (#15658) 2019-10-24 11:58:37 -05:00
Robby Candra 16ae9ee88b Update Configuration_adv 2019-10-17 05:37:22 +07:00
Robby Candra 9b88c3e79b DOGM Progress Display, option to disable display rotation 2019-10-17 05:26:09 +07:00
Jason Smith 832cb7e1ac Z_STEPPER_AUTO_ALIGN — To align with Z stepper points (#15195) 2019-10-16 13:39:58 -05:00
InsanityAutomation b2eda1af2f Fix typo in G34 configuration (#15572) 2019-10-15 17:22:13 -05:00
LinFor b20d5a7cc6 Estimate Remaining Time (graphical display) (#15497) 2019-10-10 21:03:33 -05:00
Scott Lahteine b4d48fdc91 Followup to #15481 2019-10-08 21:38:02 -05:00
Scott Lahteine c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
Scott Lahteine 9dcccc11ba Fix extra condition 2019-10-07 22:36:49 -05:00
Giuliano Zaro a1ad01e4ab Limit Case Light PWM (#15459) 2019-10-05 22:32:50 -05:00
Bob Kuhn 178dcd6fd8 SPI chaining with TMCStepper simplified interface (#15179) 2019-09-29 05:47:20 -05:00
Scott Lahteine 50e4545255
Add custom types for position (#15204) 2019-09-29 04:25:39 -05:00
Ludy f28f191ebf Trailing whitespace (#15403) 2019-09-28 15:32:37 -05:00
InsanityAutomation a6b0223eea Revive and improve DELTA probe bounds, LRFB options (#15372) 2019-09-28 01:19:11 -05:00
Scott Lahteine 9a209012b5 Improve M114_DETAIL comment 2019-09-25 20:29:29 -05:00
Marcio Teixeira 149e9b733e Simplified ExtUI language selection (#15359) 2019-09-25 01:25:21 -05:00
Marcio Teixeira 4ff59d178d LULZBOT_TOUCH_UI extended character set (#15301) 2019-09-24 18:49:40 -05:00
InsanityAutomation 6a312fae80 Add before/after dir change delays (#15314) 2019-09-19 23:05:17 -05:00
Scott Lahteine 843a19102c Shorten an option description 2019-09-14 16:45:04 -05:00
Scott Lahteine 3d0ead7dcb Bring Configuration_adv.h up to date 2019-09-14 04:30:17 -05:00
Scott Lahteine 1d574b0f6a Tweak config spaces 2019-09-11 17:32:54 -05:00
Marcio Teixeira 47d19bab40 Lulzbot ExtUI Western language support (#15208) 
Fix #15134
 2019-09-10 20:07:03 -05:00
Jamie dbee0e9c54 Analog joystick jogging control (#14648) 2019-09-08 00:55:34 -05:00
Scott Lahteine a3052da703 Move manual move to lcd section 2019-09-06 18:24:39 -05:00
Scott Lahteine 18dd5cb46a Config comment patch 2019-09-05 01:48:12 -05:00
Scott Lahteine 2563e32aa3 Format FWRETRACT config comments 2019-09-04 12:48:50 -05:00
Bob Kuhn ba91bca1eb TMC SPI daisy chain support (experimental) (#15081) 2019-08-30 17:39:45 -05:00
thisiskeithb f5a1fabd38 Clarify TMC2209 Sensitivity vs. Others (#15092) 2019-08-29 16:57:56 -05:00
Robby Candra 38983fdfa9 Add 'Back' Button for Touch TFT 320x240 (#15060) 2019-08-29 01:19:07 -05:00
AlexandrZloy 0ebaea94be Add stallGuard threshold for X2 (#15042) 2019-08-29 00:15:31 -05:00
Marcio Teixeira da601d5114 Update USB_FLASH_DRIVE_SUPPORT (#15021) 2019-08-24 01:47:19 -05:00
Scott Lahteine 5e777601f3
Add TURBO_BACK_MENU_ITEM option (#14991) 2019-08-20 19:37:03 -05:00
Tim Moore 67f8ba6fed Allow pullup/downs on power loss pin (#14986) 2019-08-20 02:40:44 -05:00
Scott Lahteine c8e476ad60 Embed some items in HAS_LCD_MENU 2019-08-18 18:41:51 -05:00
Ludy 6715fd159c Animated Marlin boot screen (#14961) 2019-08-17 18:40:01 -05:00
Marcio Teixeira 8bdb3d9970 Add CONTROLLERFAN_SPEED_Z_ONLY (#14956) 2019-08-16 21:57:19 -05:00
Marcio Teixeira 274934ad81 Add LULZBOT_TOUCH_UI (#14967) 2019-08-16 18:34:13 -05:00
Marcio Teixeira 179d6c4ed1 Add STARTUP_SCRIPT option. M17 parity with M18. (#14953) 2019-08-14 21:05:15 -05:00
Joseph Bozarth 0fbb26c28f M16 - Expected Printer Check (#14924) 2019-08-13 23:38:45 -05:00
teemuatlut d4974ea719 TMC SPI Endstops and Improved Sensorless Homing (#14044) 2019-08-04 22:22:58 -05:00
rafaljot e44fccf3d2 Add support for M575 (#14757) 2019-07-30 02:30:00 -05:00
MarcelMo f8aa52346f Configurable Z move distance (#14593) 2019-07-30 02:16:26 -05:00
Marcio Teixeira eefe3f595a New options: Bootscreen as Info, game Easter-egg (#13829) 2019-07-28 22:47:20 -05:00
Scott Lahteine 6b02b89ab4 Update serial sub-unit descriptions 2019-07-28 17:38:37 -05:00
Giuliano Zaro 290466578f Adafruit Grand Central M4 (#14749) 2019-07-28 14:48:29 -05:00
Scott Lahteine 5c3ec6306f
Max7219 side-by-side arrangement (#14702) 2019-07-22 05:22:21 -05:00
Scott Lahteine b3f42d2519 Update SD host config comment 2019-06-28 19:13:27 -05:00
Scott Lahteine 93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine d7d80418ae
Singleton for cutting tools (#14429) 2019-06-27 23:06:49 -05:00
Scott Lahteine 00cc1079af Add missing chamber auto fan options 2019-06-27 16:05:47 -05:00
Andy Shaw 064177154c Update SD card connection / sharing options (#14325) 2019-06-26 03:55:57 -05:00
InsanityAutomation aa0383a83b Enhance IDEX toolchange auto-return w/ no park, full control (#14117) 2019-06-23 20:00:48 -05:00
InsanityAutomation a9acd2f497 G34 configurable angle limit (#14321) 2019-06-20 21:18:36 -05:00
Scott Lahteine a31cb910f5 Tweak some config spacing 2019-06-20 21:08:47 -05:00
Scott Lahteine 4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Scott Lahteine dd06017f64 Bring configs up to date 2019-06-19 01:03:51 -05:00
Scott Lahteine aacb904e1f Adjust some config comments 2019-06-17 20:22:07 -05:00
mb300sd bf8bfb5c66 Add Coolant Control M7/M8/M9 (#10745) 2019-06-13 18:43:11 -05:00
Scott Lahteine f7792c0192 Group manual move options 2019-06-12 19:49:18 -05:00
Kaushik Vemparala c88d9ae282 Option to leave heaters set on SD abort (#14251) 2019-06-10 23:57:55 -05:00
InsanityAutomation b7eeb5b13b Move BLTouch options to adv config (#14131) 
Plus other BLTouch and menu enhancements.
 2019-06-10 17:46:42 -05:00
Scott Lahteine 0ca2073625 ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT 2019-06-10 17:28:35 -05:00
teemuatlut cccc51ee0e TMC Square Wave Stepping mode (#14195) 2019-06-09 05:08:05 -05:00
InsanityAutomation 4138b1f9ae Option to disable Case Light brightness control (#14165) 2019-06-07 07:23:42 -05:00
InsanityAutomation 123e58d9c3 Heated Chamber for Graphical LCD (#14190) 2019-05-30 18:31:50 -05:00
Scott Lahteine 7cce6b8d68 Bring configs up to date (MANUAL_FEEDRATE) 2019-05-25 16:31:13 -05:00
Scott Lahteine 9bf65eacaa Remove old adv config heading 2019-05-19 15:24:01 -05:00
Scott Lahteine 785c01f2bc Use US spelling of 'behavior' 2019-05-15 01:49:17 -05:00
chai-md 940ff8e7c8 Improve LV8729 stepping (#13776) 2019-05-11 19:02:19 -05:00
Tanguy Pruvot 11adcf1ce3 Add'l PLR options, AVR strstr_P compat (#13880) 2019-05-07 20:38:40 -05:00
Stephan 483822f3aa Fix some THERMAL_PROTECTION_CHAMBER issues (#13678) 2019-05-06 19:55:01 -05:00
doggyfan 23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
InsanityAutomation 3fcab8dbf1 Option to disable fans during pause (#13820) 2019-05-04 15:50:44 -05:00
Robby Candra 0181e57417 Add a minimum Z change option to power-loss recovery (#13859) 2019-05-02 22:29:05 -05:00
Roxy-3D 142c8e2fed
Remove redundant Frivolous Game Options 2019-04-28 14:03:53 -05:00
Scott Lahteine 9ccbd382e7 Update Watchdog description 2019-04-27 14:56:12 +02:00
Bob-the-Kuhn db89fc0304 Revert "bring my copy up to date" 
This reverts commit 503905c628.
 2019-04-25 17:38:41 -05:00
Bob-the-Kuhn 503905c628 bring my copy up to date 2019-04-25 12:08:49 -05:00
Bob-the-Kuhn 520585c5ed Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-17 15:34:29 -05:00
jmdearras 5f49b65c1f Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712) 2019-04-15 22:55:33 -05:00
Bob-the-Kuhn 9dd4252b39 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-12 22:07:12 -05:00
Stephan 84273557f9 Move and update heated chamber settings (#13671) 
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
 2019-04-12 15:38:10 -05:00
Scott Lahteine cee3b172b9
Fix Marlin splash screen logic (#13646) 2019-04-10 17:14:57 -05:00
InsanityAutomation ba31d39f6d Azteeg X5 Mini support (#13425) 2019-04-08 23:10:45 -05:00
Scott Lahteine 9abe9aff56
Confirm before starting SD print (#13616) 2019-04-08 13:44:35 -05:00
Roxy-3D 9cee81d47e Option to show babysteps total since G28 (#13580) 2019-04-06 18:04:34 -05:00
Scott Lahteine 3221658a78 Adjust park position description 2019-04-05 20:40:50 -05:00
Marcio Teixeira 27a4927ed1 Add option to move away from endstop after homing. (#13557) 
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
 2019-04-04 02:47:19 -05:00
Robby Candra 46445a5a16 Event G-code for Stop SD Print (#13547) 
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
 2019-04-02 22:09:30 -05:00
Scott Lahteine 8b7c3eec83 Games, for fun (and stress-testing) (#13464) 2019-04-01 17:48:54 -05:00
Scott Lahteine 5de7b5b35e
Games, for fun (and stress-testing) (#13464) 2019-04-01 15:43:48 -05:00
InsanityAutomation 7240e3a68f Allow G26 with no heated bed (#13511) 2019-03-29 13:32:43 -05:00
Sam Lane e3ab54753b Add extra Linear Advance factors (#13490) 2019-03-26 04:02:27 -05:00
Scott Lahteine d2e0c03afb Remove trailing whitespace 2019-03-25 20:51:38 -05:00
7eggert d96f7d6068 Minimum segments for G2/G3. Better for small arcs. (#13466) 2019-03-24 19:53:47 -05:00
Scott Lahteine 49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
InsanityAutomation 09eb30dc05 IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404) 2019-03-15 22:46:27 -05:00
Hadrien Jouet 0278ad0a6d Add ESP32 WiFi interface (#11209) 2019-03-13 00:48:08 -05:00
InsanityAutomation 050eac03af Single X Duplication Extension (#13373) 
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
 2019-03-13 00:42:50 -05:00
Michiel Baird b824a517aa Add G38.4 and G38.5 (#13348) 2019-03-10 17:22:09 -05:00
Reece Kibble dbead66988 Allows user to set (almost) any PWM frequency (#12638) 2019-03-08 02:15:42 -06:00
3dlabsio 645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
InsanityAutomation bf8b38e0f7 Relocate configs above Marlin/src folder (#13299) 2019-03-03 16:50:56 -06:00
Scott Lahteine 998ce55be0 Alternative fan bitmap 2019-02-28 22:08:20 -06:00
Chris Pepper 4ab433d391 Fix binary protocol with one serial port (#13270) 
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
 2019-02-27 19:57:48 -06:00
InsanityAutomation eb4bf93ea4 Add more Babystep options (#13262) 2019-02-27 04:38:56 -06:00
Scott Lahteine 1424b368cf Tweak M122 comment in configs 2019-02-19 16:20:18 -06:00
Scott Lahteine e00aad84af Add M240 parameters D I J R S 2019-02-14 20:00:40 -06:00
Scott Lahteine d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 2019-02-14 15:09:35 -06:00
revilor e56c13670d Service interval watchdog (#13105) 2019-02-12 15:58:56 -06:00
InsanityAutomation 7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine 0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine 5a316664e5 Update chopper timing 2019-02-10 03:12:20 -06:00
Marcio Teixeira e1604198ff G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050) 2019-02-06 17:20:17 -06:00
InsanityAutomation 413e303ad5 More Advanced Pause options (#12984) 2019-02-06 06:39:42 -06:00
teemuatlut d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Nicolas G 6fb4001b58 Add option to disable fan speed slowing in M303 (#13066) 2019-02-04 00:12:41 -06:00
Scott Lahteine 38c2ca9281 Clean up trailing whitespace 2019-02-03 23:00:57 -06:00
revilor 6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
Scott Lahteine 996f7d1642 Fix I2C_POSITION_ENCODERS commentary 2019-01-30 22:17:17 -06:00
InsanityAutomation 48a3502656 Remote streamer improvements (#12982) 2019-01-27 22:43:13 -06:00
Scott Lahteine ae91914260 Prevent name conflicts with mixed stepper drivers 2019-01-24 01:25:28 -06:00
Scott Lahteine 0eca236dcd Fix L6470 config comments 2019-01-24 00:58:16 -06:00
Bob Kuhn 2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
Scott Lahteine e1f951813a Remove old block end comment 2019-01-20 02:30:03 -06:00
teemuatlut e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
teemuatlut 1a79878dff Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN 2019-01-12 18:07:28 -06:00
InsanityAutomation 082f6a27de ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) 2019-01-12 00:41:48 -06:00
Scott Lahteine 5f2d75f45b Move PINS_DEBUGGING to @section develop 2019-01-08 20:05:05 -06:00
Kaushik Vemparala ba7e35cbab Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774) 2019-01-04 19:30:08 -06:00
Scott Lahteine 371d9a1acf Fix line-endings, formatting, whitespace 
Followup to #12770
 2018-12-30 15:38:20 -06:00
Ludy cfc5e96b4b Move JD to Config.h (and fix jerk->eeprom bug) (#12720) 2018-12-27 15:29:39 -06:00
teemuatlut 7a5e637a37 Add spreadCycle parameter sets (#12645) 2018-12-18 12:42:14 -06:00
Dave Johnson 9a4a463ec4 Sanity-check LIGHTWEIGHT_UI, move comment up (#12630) 2018-12-12 16:59:20 -06:00
teemuatlut 55144284c2 TMC connection test, spreadCycle parameters, improved debugging (#12616) 2018-12-09 20:54:48 -06:00
Marcio Teixeira b22716e938 M425 Backlash Correction (#11061) 2018-12-08 14:36:46 -06:00
teemuatlut 50b2fbd031 Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582) 2018-12-07 15:34:21 -06:00
Scott Lahteine 7a361ad36a
Alternative fan image option (#12579) 
* Alternative fan bitmap
* Move bed over by 3px
 2018-12-03 05:55:33 -06:00
Scott Lahteine 4f9ec9ab45
Add heating progress bars (#12543) 2018-11-27 21:15:52 -06:00
Scott Lahteine b57343c255 Put status screen options in Configuration_adv.h 2018-11-23 23:15:07 -06:00
Scott Lahteine 1fcc13b011 Allow Serial Overrun Protection to be disabled 2018-11-23 21:07:38 -06:00
Scott Lahteine 30a49f5ee2 Apply extra condition to LCD_PROGRESS_BAR 2018-11-11 08:36:10 -06:00
revilor b60abc7c37 [2.0.x] Macro G-codes (#9365) 2018-11-09 05:25:08 -06:00
InsanityAutomation 6471a75a22 Combine more tool-change variables (#12137) 2018-11-06 22:22:20 -06:00
Scott Lahteine 3866aeac52 Clean up ENCODER_RATE_MULTIPLIER config 2018-11-05 04:17:37 -06:00
Scott Lahteine 498dfa291e Update and fix CHDK 2018-11-05 04:17:37 -06:00
Scott Lahteine 549d11225a Add to description of Z_STEPPER_AUTO_ALIGN 
In response to #12272
 2018-10-31 18:07:20 -05:00
Chris Pepper 66d44c72c3 Add fast binary file transfer to SD card option (#12249) 2018-10-30 19:44:12 -05:00
Scott Lahteine 9e663a624b Apply #pragma once to configuration files 2018-10-30 18:35:12 -05:00
Scott Lahteine 98c32d8df1 Fix a config endif label 2018-10-30 18:28:16 -05:00
TheLongAndOnly 5536228359 G34 Auto-align multi-stepper Z axis (#11302) 2018-10-29 14:01:36 -05:00
Scott Lahteine 182b1405d9 LCD conditionals in configurations 2018-10-28 15:46:45 -05:00
Scott Lahteine e8031b1152 Add Custom Microstepping options 2018-10-25 11:26:32 -05:00
TheSFReader a07ac6312f G0 feedrate may be fixed or variable (#12172) 2018-10-25 10:35:16 -05:00
Ludy a93e9e6e9b Use preheat labels in place of PLA/ABS (#12194) 2018-10-23 15:38:17 -05:00
Scott Lahteine 9090065e9f Move EXTRA_FAN_SPEED above FWRETRACT 2018-10-19 15:15:00 -05:00
Scott Lahteine 67a3c5a16a
Alternative info screen (Prusa-style) (#12132) 
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
 2018-10-18 11:34:52 -05:00
InsanityAutomation 3ec3872730 Single Z raise value for all tool-changing / parking (#12090) 
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
 2018-10-17 11:11:41 -05:00
Scott Lahteine 8bf596bd4c RETRACT_ZLIFT => RETRACT_ZRAISE 2018-10-16 16:46:40 -05:00
Scott Lahteine 84b59d58fb Clean up whitespace 2018-10-16 02:02:20 -05:00
TheSFReader af939c158a Option for G0 to have a separate feedrate (#12089) 2018-10-16 01:49:51 -05:00
Scott Lahteine 43940d59ed Fix trailing spaces 2018-10-10 16:24:35 -05:00
Scott Lahteine cf5284cdf2
Add SD Firmware Update capability (#12043) 
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
 2018-10-09 20:00:47 -05:00
Scott Lahteine 07db08e39d Fix EXTRUDER_AUTO_FAN_SPEED comment 2018-10-06 19:51:17 -05:00
Scott Lahteine ca0e308105 Fix up some units comments 2018-10-06 19:45:50 -05:00
Scott Lahteine 52a37913c1 Extend and apply some corrections 2018-10-06 00:27:21 -05:00
thesfreader e09c144674 Add CNC-like G-code options 2018-10-06 00:15:27 -05:00
Marcio Teixeira 2067619a26 Add USB_FLASH_DRIVE_SUPPORT 2018-10-04 19:54:12 -05:00
Scott Lahteine bb561baf9e Tweak some config comments 2018-10-04 02:42:12 -05:00
Thomas Moore ab4549d2bc [2.0.x] Add simultaneous retraction for mixing extruder (#11941) 2018-10-01 23:32:02 -05:00
dot-bob b0fd8f2d74 Add option to move Z on double-click when idle 2018-10-01 01:41:11 -05:00
Scott Lahteine e78bdd654d Clean up BABYSTEP options 2018-10-01 01:29:21 -05:00
Scott Lahteine 3c40933713 Remove trailing spaces, old comment 2018-09-30 20:47:06 -05:00
Thomas Moore 3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Victor Tseng 93839e2f73 Add option to enable/disable autoretract altogether (#11904) 2018-09-28 16:52:56 -05:00
Scott Lahteine 241168926d Update some configs 2018-09-27 16:42:59 -05:00
Scott Lahteine cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916) 2018-09-24 21:46:56 -04:00
teemuatlut 884ad75cb8 Update config files 2018-09-24 17:26:18 -04:00
InsanityAutomation 1104054d73 2.0 IDEX Independent z offset and other fixes (#11862) 
* Add Formbot Raptor board

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Add a second Z probe Z offset

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Modify method to utilize live adjustment of hotend z offset

Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems

* Move config item and catchup other code to current method
 2018-09-24 09:40:48 -05:00
Scott Lahteine ddcbf80f23 Followup for Z_TRIPLE_ENDSTOPS 2018-09-23 12:22:31 -04:00
Roxy-3D d3d6be8210 Add MAX7219 reverse units option (#11860) 2018-09-19 18:54:51 -05:00
InsanityAutomation f38570ac55 Add custom user menu title (#11769) 2018-09-19 15:04:34 -05:00
Scott Lahteine f5c210d33d Config changes supporting up to 6 extruders 2018-09-16 22:22:35 -05:00
Holger Müller 1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Scott Lahteine f79a5a9dee Tweak spacing of L6470 options 2018-09-12 23:18:11 -05:00
Sam Lane 1b6bc19427 Add external closed loop controller support 2018-09-10 03:17:17 -05:00
Marcio Teixeira beb51c2d58 Show manual extrusion moves as relative in LCD 
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
 2018-09-06 02:00:25 -05:00
Scott Lahteine e3fc9aa35f Update some config comments 2018-08-31 16:03:44 -05:00
Michael Triffon f8c52c9c29 Azteeg X5 Mini WiFi support (#11601) 2018-08-21 23:58:26 -05:00
Scott Lahteine 2d3317a35b Prettify Dual X Carriage description 2018-08-21 23:34:29 -05:00
Greg Nutt a1a5367380 Smoothieboard V1.0/1.1 and A5984 support 2018-08-09 23:03:17 -05:00
Scott Lahteine 9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash (#11447) 2018-08-03 20:47:29 -05:00
teemuatlut fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
Roxy-3D 9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 (#11285) 
* Add Multi Unit Support for Max7219 to bugfix_2.0.0

* Apply multi-MAX7219 to example configs

* Tweak some spacing, macros
 2018-07-19 13:56:47 -05:00
Scott Lahteine 665ac1e4d0 Add POWER_LOSS_PIN support 2018-07-18 19:55:10 -05:00
Scott Lahteine e0ab8acf19 Add "Marlin Dev Mode" option 2018-07-02 22:55:21 -05:00
Scott Lahteine bd7f5848f1
Remove JUNCTION_DEVIATION_INCLUDE_E option (#11147) 2018-06-29 22:42:05 -05:00
etagle 5b49fccf80 Add stepper driver DIR delay configuration option 
...and recommended pulse width configuration for A4988
 2018-06-26 13:28:04 -05:00
Scott Lahteine d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 (#11034) 2018-06-18 22:04:03 -05:00
Simon Jouet e2aeda61ed HAL for Espressif ESP32 Wifi 2018-06-13 19:33:35 -05:00
etagle 6f14bcaa3e Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping 
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
 2018-06-10 16:02:47 -05:00
etagle 39a7e7720d Adaptive multiaxis step smoothing 
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup
 2018-06-10 16:02:47 -05:00
Scott Lahteine 8a376e6beb Update MINIMUM_STEPPER_PULSE description 2018-06-10 00:13:03 -05:00
Scott Lahteine 2deff0d9b9 Fix/Improve junction deviation 
- Respect axis max acceleration limits instead of forcing a fixed acceleration value.
- The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.
 2018-05-31 20:09:53 -05:00
Scott Lahteine 2e139fe50f Tweak configuration spacing 2018-05-26 18:33:51 -05:00
Scott Lahteine 931ab4ec40 Rename Junction Deviation options 2018-05-26 18:33:51 -05:00
Jiri Jaburek 43ddb29f9e Add FAN_MAX_PWM for M106-controlled fans 2018-05-15 21:18:46 -05:00
Scott Lahteine acacee80a2 Add JUNCTION_ACCELERATION_FACTOR to configs 
Part of #10688

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-11 23:13:27 -05:00
Scott Lahteine 4d4bf7897d Junction Deviation jerk limiting option 2018-05-08 10:08:54 -05:00
Scott Lahteine 840ff60952 Bring some configs up to date 2018-05-06 02:42:27 -05:00
nightdemonx e911635fb1 Add thermocouple with AD8495 support 2018-05-02 08:43:16 -05:00
Scott Lahteine 05c33833e7
[2.0.x] Add NO_LCD_MENUS option (#10582) 2018-04-30 21:16:31 -05:00
Scott Lahteine 11ab017dd0 Creality3D Power-Loss Recovery 2018-04-21 21:56:50 -05:00
Marcio Teixeira 5cc7916e69 Add G29_RETRY_AND_RECOVER feature 
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
 2018-04-19 19:45:53 -05:00
Sean 2d9b0a66fe Add Filament Change accelerations 2018-04-09 23:57:27 -05:00
Lenbok 0e8242180d Chamber temperature monitoring and auto fan control. 
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
 2018-04-06 23:09:06 -05:00
Sean 2fa0a73c2c Implement filament change continuous purge 2018-04-04 20:57:51 -05:00
Scott Lahteine 1d22609473 MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS 2018-03-19 04:11:46 -05:00
Marcio Teixeira c24dbcbfe1 When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10081) 
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
 2018-03-14 02:44:30 -05:00
Studiodyne e7a61de8af [2.0] FWRetract Reset (Best way) (#10083) 2018-03-14 01:35:30 -05:00
Scott Lahteine e7570f3195 Improve TMC config organization, naming 2018-03-14 00:18:41 -05:00
Bob-the-Kuhn 6b4a928145 2uS default step pulse (#9989) 2018-03-07 21:11:01 -06:00
Scott Lahteine 94f5204629 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 2018-03-07 01:50:30 -06:00
Scott Lahteine b198b49d15 Followup to AUTO_REPORT_SD_STATUS 
Followup to #9832
 2018-03-07 00:13:42 -06:00
Studiodyne 23a576faf7 [2.0] Fix for FW retract (#9878) 2018-03-01 15:15:40 -06:00
Scott Lahteine b8485528b2 Prettify LCD_PROGRESS_BAR options 2018-02-23 19:19:57 -06:00
Scott Lahteine e65a853c59 Fix LCD_PROGRESS_BAR 
Fix #9208
 2018-02-23 14:05:10 -06:00
Scott Lahteine 2bd252b501
[2.0.x] LIN_ADVANCE v1.5 (#9712) 2018-02-23 00:53:29 -06:00
Marcio Teixeira 532bb3aaa1 Lightweight status screen for ST7920 
- This status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
 2018-02-22 00:10:43 -06:00
Scott Lahteine 59c98d6fd5
Hephestos2 heated bed kit for all (#9757) 2018-02-21 22:27:09 -06:00
Kevin 9019ea0fce Option to force X or Y to home first when homing the other axis 2018-02-18 01:11:41 -06:00
blye 330437ad7c Update LCD_SET_PROGRESS_MANUALLY in configs 2018-02-17 08:12:10 -06:00
Bob-the-Kuhn 349dafa728 config update (set to -1) 2018-02-15 21:42:54 -06:00
Scott Lahteine 5b70d3da1c Update DIGIPOT_I2C_MOTOR_CURRENTS comments 2018-02-13 22:54:12 -06:00
Scott Lahteine 694d2ebec0 TMC SW SPI pins in Configuration_adv.h 
Counterpart to #9632
 2018-02-08 18:49:38 -06:00
Thomas Moore 1541224a81 Enable Z axis and delta sensorless homing (#9516) 2018-02-08 04:20:44 -06:00
Scott Lahteine b2f8b4ada5
I2C position encoders update (#9533) 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 03:57:11 -06:00
Manuel Valentino 374f2a5e16 [2.0.x] Fixed wrong information about TMC2208 wiring (#9335) 2018-02-02 04:45:55 -06:00
teemuatlut 5c69d45f5b [2.0.x] TMC2130 support for LPC platform (#9114) 2018-02-01 21:49:40 -06:00
Scott Lahteine 8190fdb260
[2.0.x] Option to use Neopixel as case light (#9270) 
* Add option to use Neopixel as case light

* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
 2018-01-20 16:58:41 -06:00
Scott Lahteine 02ff12d491 More up front option to show SD percentage 2018-01-14 23:32:39 -06:00
Scott Lahteine 5c076a6d93 Improved M915 description 2018-01-09 18:56:27 -06:00
teemuatlut cdc61ebf53 Add M915 configuration option 2018-01-09 18:28:48 +02:00
Scott Lahteine 7541316bb4 Add M701/M702 Filament Load/Unload, M603 2018-01-04 15:07:37 -06:00
Scott Lahteine 2929c9e56f A specific option to SLIM_LCD_MENUS 2017-12-31 00:11:22 -06:00
Scott Lahteine f704f405af Add pause/resume actions on M600, M125 2017-12-25 01:39:18 -06:00
Thomas Moore f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 2017-12-25 01:38:06 -06:00
Scott Lahteine fdc5e72720 A single setting to validate filament width 2017-12-19 21:33:25 -06:00
Scott Lahteine 933f76fda3 Option to disable all volumetric extrusion 2017-12-19 19:51:25 -06:00
robpower 5595098063 V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option. 2017-12-15 16:22:55 -06:00
teemuatlut 0cd1e91056 [2.0.x] TMC driver update (#8769) 2017-12-15 15:03:14 -06:00
Scott Lahteine ae663a4198 PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING 2017-12-07 16:44:13 -06:00
Scott Lahteine 8f90642eea LED_CONTROL_MENU config changes 2017-11-29 21:02:56 -06:00
Tannoo cf0f78336b New Feature: LED_CONTROL_MENU 2017-11-29 21:02:55 -06:00
Scott Lahteine a67cf78c6b Clean up whitespace, spacing 2017-11-26 20:18:52 -06:00
Scott Lahteine 7be4857ab9 Tweak BLOCK_BUFFER_SIZE description 2017-11-26 17:36:40 -06:00
Scott Lahteine 5926c9c97b Followup for MESH_EDIT_GFX_OVERLAY 2017-11-24 15:53:25 -06:00
Scott Lahteine dc82babe8e Implement NANODLP_Z_SYNC for 2.0.x 2017-11-24 00:28:06 -06:00
Scott Lahteine 54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL 
[2.0] Add M114_DETAIL to Configuration_adv.h
 2017-11-14 00:28:55 -06:00
Scott Lahteine 009e3a7aa7 Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:03:17 -06:00
Scott Lahteine 3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:05:57 -06:00
Scott Lahteine 95ea43bde4 Update XYZ dual stepper configurations 2017-11-08 20:31:43 -06:00
Roxy-3D ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) 
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
 2017-11-07 17:13:53 -06:00
Scott Lahteine 2c099fd4c2 Update Thermal Protection Documentation 2017-11-07 15:46:44 -06:00
Scott Lahteine 1b42fba39b Add CNC_COORDINATE_SYSTEMS to configs 2017-11-04 22:28:46 -05:00
Scott Lahteine ce1c9c0808 Tweak QUICK_HOME description 2017-10-29 23:48:13 -05:00
Scott Lahteine e04425281d Add Dual Steppers / Endstops to configs 2017-10-29 18:56:04 -05:00
Scott Lahteine edff2c917b Cleanup for DIGIPOTS settings 2017-10-29 18:56:03 -05:00
Scott Lahteine 6b1d1a818b Revert default BABYSTEP_MULTIPLICATOR to 1 2017-10-27 19:45:44 -05:00
Scott Lahteine 7fad26549b Concise SD_REPRINT_LAST_SELECTED_FILE description 2017-10-26 23:33:02 -05:00
Roxy-3D 3f5f39576b Reprint option for last SD Memory card file (#8106) 
* Re-Print of same SD Memory Card file with single click

* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of  https://github.com/MarlinFirmware/Marlin/pull/8104
 2017-10-26 15:50:18 -05:00
Scott Lahteine 7f55d82fd1 Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 2017-10-24 18:26:43 -05:00
Scott Lahteine 580b6e9089 Apply physical limits to mesh bounds 2017-10-24 16:54:07 -05:00
Scott Lahteine 3d2b2eb1ca Prevent SDCARD_SORT_ALPHA from exploding 2017-10-20 19:13:21 -05:00
Scott Lahteine 783ddf9691 Add SCROLL_LONG_FILENAMES option 2017-10-20 19:13:21 -05:00
Thomas Moore 67cc29cd3c Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8012) 2017-10-18 10:03:30 -05:00
Scott Lahteine ce48403a0b Add EXTRA_FAN_SPEED feature 
Based on #7883 by @studiodyne
 2017-10-16 02:34:13 -05:00
Scott Lahteine 5c4f3e0107 Add LCD_SET_PROGRESS_MANUALLY 2017-10-15 03:05:29 -05:00
Bob-the-Kuhn 4e3ee845b9 config_adv (#7941) 
get rid of twi.h

move to board files
 2017-10-11 15:42:24 -05:00
Scott Lahteine b30b55307c Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance 
[2.0.x] Remove legacy ADVANCE feature
 2017-10-10 00:31:18 -05:00
Scott Lahteine 560d366b80 Move VIKI SCK/MOSI pins fix to Conditionals_POST.h 2017-10-09 16:13:49 -05:00
Scott Lahteine 03f4891fb9 Remove legacy ADVANCE feature 2017-10-09 04:25:18 -05:00
Scott Lahteine 508d764d63 Add serial XON/XOFF handshaking 
From @ejtagle, originally #7459
 2017-10-02 04:12:30 -05:00
Tannoo c869dc9745 User script return-to-status option 2017-09-27 11:31:38 -05:00
Scott Lahteine ce1638e32f Add Babystep Z graphic overlay 
See PR #7593
 2017-09-27 01:25:05 -05:00
Scott Lahteine 981a610f75 Disable BABYSTEP_XY, add to SDSORT comment 2017-09-27 00:48:59 -05:00
Scott Lahteine 2281154025 Increase BABYSTEP_MULTIPLICATOR to 100 2017-09-27 00:48:46 -05:00
Scott Lahteine f37ed314e0 Friendly layout for Arduino IDE 2017-09-21 16:27:13 -05:00
Renamed from Marlin/src/config/Configuration_adv.h (Browse further)