zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
11270 commits 1 branch 0 tags 156 MiB
Commit graph

9476 commits

Author SHA1 Message Date
InsanityAutomation 2e98437392 Clean up main menu (#11972) 2018-10-01 00:15:06 -05:00
InsanityAutomation 6d862b2916 Home before level corners, if needed (#11976) 
…and add a consistent homing screen for all LCD pre-homing.
 2018-10-01 00:14:28 -05:00
Scott Lahteine 11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
InsanityAutomation 4d5566a6b7 Add filament runout sensor menu item (#11971) 2018-09-30 21:33:46 -05:00
Scott Lahteine 8489673cea Adjust some HAL formatting 2018-09-30 21:24:37 -05:00
Scott Lahteine fb8a07660a Followup to minmax patch 
Co-Authored-By: Palatis <palatis@gmail.com>
 2018-09-30 21:17:31 -05:00
Scott Lahteine 3c40933713 Remove trailing spaces, old comment 2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller a3ec805c97 Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD (#11964) 2018-09-30 05:41:26 -05:00
AnoNymous b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Scott Lahteine e10f730478 Tweak vector_3::apply_rotation 2018-09-30 01:51:33 -05:00
Scott Lahteine e2ab78d876 Fix SERIAL_PORT_2 sanity check 2018-09-30 00:24:10 -05:00
AnoNymous a644d8cb93 Avoid copies in vector and matrix (#11959) 2018-09-29 23:04:40 -05:00
Scott Lahteine 693865a649 Fix some whitespace 2018-09-29 22:36:36 -05:00
Scott Lahteine 9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing 
[2.0.x] Add TMC2130 sensorless probing
 2018-09-29 21:02:22 -05:00
Scott Lahteine 14df753086 Correction for block->mix_steps 
Fix #11484
 2018-09-29 19:13:17 -05:00
Alexander Amelkin 2ecfda80ac Improve support for JTAG/SWD pins reuse (#11963) 
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
 2018-09-29 19:00:49 -05:00
Scott Lahteine bb47009656 Apply sensorless changes to example configs 2018-09-29 18:54:14 -05:00
Thomas Moore 3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Scott Lahteine 7d5c336c56 Corrections for dylsexic TMC 2018-09-29 18:51:11 -05:00
Scott Lahteine d89d8fe852 Fix Busy State in temperature.cpp 
Fix #11954
 2018-09-29 17:03:35 -05:00
Giuliano Zaro 70e7a465d8 [2.0.x] Fix compile error (#11951) 
Fix compile error intruduced with M109 modification
 2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller 935b120949 Anycubic Kossel: probe closer to the edge (#11950) 2018-09-29 02:26:16 -05:00
Scott Lahteine 1410e79e7f Ensure M109 handles autotemp 2018-09-29 02:12:06 -05:00
Scott Lahteine e4389f7d23
Standard methods to wait for heating (#11949) 2018-09-29 01:44:47 -05:00
Scott Lahteine bdc9889d3a Fix a sanity check 2018-09-29 00:24:25 -05:00
Scott Lahteine 321f9140d1 Followup to #11904 2018-09-28 20:04:40 -05:00
InsanityAutomation 23114aeb81 Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948) 2018-09-28 19:00:11 -05:00
Scott Lahteine 1667ed9d1c Pause should use ECHOLNPGM 2018-09-28 18:15:38 -05:00
Victor Tseng 93839e2f73 Add option to enable/disable autoretract altogether (#11904) 2018-09-28 16:52:56 -05:00
Scott Lahteine ad21a4f07b Tweaks to HAL format and order 2018-09-28 15:59:50 -05:00
Scott Lahteine b682a1961a Tweak STM32F7 TMC2660 class 2018-09-27 21:13:15 -05:00
Scott Lahteine a0a3b23e35 Reduce Raptor bootscreen by 144 bytes 2018-09-27 18:24:40 -05:00
InsanityAutomation 95d793456b Add Formbot Raptor config, fix other Formbot configs (#11926) 2018-09-27 19:20:43 -04:00
Mitch Roote d016b572e3 [2.0.x] Add pin configuration for Fysetc F6 (#11932) 2018-09-27 19:20:19 -04:00
Alexander Amelkin 84926b1d5a HAL general support for DISABLE_JTAG option (#11211) 
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
 2018-09-27 19:02:50 -04:00
Scott Lahteine c575c5d5f6
Bring example configs up to date (#11939) 2018-09-27 18:47:26 -04:00
Scott Lahteine 6b1a4f30a8 Fix case of T-Rex 3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine ab7bfa86e2 Fix case of T-Rex-3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine 241168926d Update some configs 2018-09-27 16:42:59 -05:00
Scott Lahteine cb6454118c Workaround for Pronterface M29 2018-09-27 16:27:02 -05:00
Victor Tseng eeab4141db [2.0.x] Anycubic Trigorilla 14 pins tweak (#11869) 2018-09-27 16:06:21 -04:00
InsanityAutomation cb9dc56630 Add GT2560 v3 support (#11914) 2018-09-27 15:13:15 -04:00
InsanityAutomation f2e630a05e Stow probe on probing failed (#11936) 
Prevents probe from being left down should probing fail and print job continue
 2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller 0b602ae101 [2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929) 2018-09-27 13:23:53 -04:00
Giuliano Zaro dc11131656 [2.0.x] fix possible race condition (#11923) 
Fix some commits done in #11900
 2018-09-25 13:56:57 -04:00
Scott Lahteine d6b9327c11 Followup for Endstop Noise Threshold 
Followup to #11912
 2018-09-25 13:50:49 -04:00
Scott Lahteine aa6e8e9325 Tweak some config comments 2018-09-25 13:42:28 -04:00
Scott Lahteine 5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00
Scott Lahteine cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916) 2018-09-24 21:46:56 -04:00
teemuatlut 884ad75cb8 Update config files 2018-09-24 17:26:18 -04:00
Giuliano Zaro 18e456d38d [2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) (#11900) 2018-09-24 16:56:01 -04:00
Scott Lahteine 6742026568 Followup for 6 extruders 2018-09-24 14:36:50 -04:00
Scott Lahteine 04bdff4115 Add a blank line 2018-09-24 12:49:02 -04:00
Marcio Teixeira ccbd045f02 Fixed warning about comparing signed to unsigned (#11909) 2018-09-24 12:03:29 -04:00
InsanityAutomation 1104054d73 2.0 IDEX Independent z offset and other fixes (#11862) 
* Add Formbot Raptor board

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Add a second Z probe Z offset

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Modify method to utilize live adjustment of hotend z offset

Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems

* Move config item and catchup other code to current method
 2018-09-24 09:40:48 -05:00
Scott Lahteine 217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW (#11905) 2018-09-24 00:43:43 -04:00
Scott Lahteine 849dea92a8 Move probe extras below probe types 2018-09-23 23:23:07 -04:00
Scott Lahteine a2b0260f0f Update Sublime files 2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller a4cdffdd69 Support for manually deployed fixed probes (#11899) 2018-09-23 19:59:08 -04:00
Scott Lahteine ddcbf80f23 Followup for Z_TRIPLE_ENDSTOPS 2018-09-23 12:22:31 -04:00
Marcio Teixeira c411e7eb0d [2.0.x] Squelch compiler warnings seen with -Wall (#11889) 2018-09-23 12:00:34 -04:00
Roxy-3D 83105590a0 Better default values for Mesh Inset 2018-09-22 03:25:18 -04:00
Roxy-3D 4163c1a514 Fix end stop and Z-probe reporting logic 2018-09-22 03:25:18 -04:00
Scott Lahteine ea9eb2fc8f Fix servo angles in config-store 2018-09-21 15:41:36 -04:00
Roxy-3D d3d6be8210 Add MAX7219 reverse units option (#11860) 2018-09-19 18:54:51 -05:00
Scott Lahteine beab9733f8 Remove extra clauses in config-store 2018-09-19 17:06:51 -05:00
Scott Lahteine 5a74b12b45 Followup to #11769 2018-09-19 16:40:32 -05:00
InsanityAutomation f38570ac55 Add custom user menu title (#11769) 2018-09-19 15:04:34 -05:00
Scott Lahteine 17494099a9 Fix parking_extruder_tool_change 
Fix #11872
 2018-09-19 03:02:07 -05:00
Scott Alfter 140caf99b8 E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 (#11865) 2018-09-18 22:24:20 -05:00
Scott Lahteine 10590c2f80 Fix some fan conditionals 2018-09-18 21:23:33 -05:00
Scott Lahteine e4ee607fc8 Fix Dual X FRS in M600 
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
 2018-09-18 21:23:33 -05:00
Scott Lahteine bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors (#11861) 2018-09-18 01:10:41 -05:00
Scott Lahteine c5e5cc5e9f Fix some trailing whitespace, macros 2018-09-17 17:30:04 -05:00
AnHardt 54bd124665 2.0.x: Fix normalize_mix() (#11856) 
Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.
 2018-09-17 16:37:38 -05:00
Roxy-3D 5fbfbde532
Fix example file to pull in correct pins file 2018-09-17 10:41:30 -05:00
Roxy-3D 378f354939
IDEX Scaled Duplication is still under development 
Take it out of the menu until it is tested and working.
 2018-09-17 10:26:44 -05:00
Scott Lahteine 65045ba54b tmc_util fix part 2 
Followup to 115abf9
 2018-09-17 05:36:17 -05:00
Scott Lahteine 09a2bee8aa
Support more filament runout sensors in M119 (#11851) 2018-09-17 03:27:13 -05:00
Scott Lahteine 115abf9c53 Fix syntax error in front of tmc_axes 2018-09-17 01:10:20 -05:00
Roxy-3D 0780913848 IDEX Improvements (#11848) 2018-09-17 01:06:22 -05:00
Scott Lahteine 39732838b4 Tweak indent of Chinese languages 2018-09-17 00:58:32 -05:00
Scott Lahteine 53bd0b55cb Followup for 6 extruders 2018-09-16 23:57:50 -05:00
Scott Lahteine 1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Scott Lahteine f5c210d33d Config changes supporting up to 6 extruders 2018-09-16 22:22:35 -05:00
Scott Lahteine d948c6e867 RADDS Extension Board V3 support 2018-09-16 22:22:35 -05:00
Thomas Moore c437bb08f1 Overhaul of the planner (#11578) 
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
 2018-09-16 21:24:15 -05:00
Scott Lahteine 8323a08642 Clean up some whitespace 2018-09-16 19:44:21 -05:00
Scott Lahteine 6286afd456 Add Triple-Z options to example configs 2018-09-16 00:35:58 -05:00
Holger Müller 1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Hannes Brandstätter-Müller bc06406d7d Fix Anycubic Kossel config (probe crash) (#11832) 2018-09-15 23:27:21 -05:00
Scott Lahteine 66f83d33e6 Fix some config comments 2018-09-15 23:21:55 -05:00
Hannes Brandstätter-Müller 84ed9b5a63 Send "G33 S P1" for Delta Height Calibration (#11831) 2018-09-15 20:17:35 -05:00
Scott Lahteine 215eee4fe5 Use 'friend' to access set_directions 2018-09-15 20:11:10 -05:00
Cassiano Leal ff51e7322d Fix for Stepper::set_directions() compilation error (#11838) 2018-09-15 19:31:51 -05:00
Scott Lahteine 809b232fa2 Fix stepper directions after M501/M502 
See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611

Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com>
 2018-09-14 20:00:55 -05:00
Scott Lahteine f79a5a9dee Tweak spacing of L6470 options 2018-09-12 23:18:11 -05:00
Hannes Brandstätter-Müller c37d3ae97d [2.0.x] Fix NOZZLE_PARK_FEATURE for Anycubic Kossel (#11812) 2018-09-12 15:37:38 -05:00
HenningJW 4fb2134f00 Fix non-sensical values for Zonestar themistor table (#11817) 
Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.
 2018-09-12 15:36:04 -05:00
Scott Lahteine b220a825a7 Fix raw_filwidth_value error 2018-09-12 04:31:55 -05:00
Scott Lahteine 1933d5d6fb Fix SD autostart with no LCD 2018-09-12 03:49:59 -05:00
Roman Moravčík 8bce5370c7 Updated slovak translation (#11807) 2018-09-12 03:29:17 -05:00
Giuliano Zaro 64d629ba2a [2.0.x] Italian language fix (#11796) 2018-09-12 03:28:22 -05:00
Scott Lahteine 8584d3697d Fix servo count define conflict 
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
 2018-09-11 16:20:31 -05:00
Scott Lahteine 06949ae510 Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD 2018-09-10 23:21:37 -05:00
Scott Lahteine d882717d98
Save some PROGMEM with constexpr (#11798) 
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
 2018-09-10 23:09:26 -05:00
Sam Lane 4f883d5971 [2.0.x] Extruder-Distinct Linear Advance K Factors (#11789) 2018-09-10 22:37:32 -05:00
Scott Lahteine fe9f088d60
[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 (#11730) 2018-09-10 21:25:40 -05:00
Scott Lahteine b6aae2b322 Tweak RAMPS_FD_V1 pins 2018-09-10 15:43:03 -05:00
Scott Lahteine 7391e23332 Fix RigidBoard FAN_PIN collision 2018-09-10 05:29:00 -05:00
Scott Lahteine 53b8c3bd66 Add EXTERNAL_CLOSED_LOOP_CONTROLLER to examples 2018-09-10 03:17:17 -05:00
Sam Lane 1b6bc19427 Add external closed loop controller support 2018-09-10 03:17:17 -05:00
Marcio Teixeira 2ebfe90be9 Add custom preheat temp to filament change (#11475) 2018-09-10 02:51:46 -05:00
Karl Andersson 69d0ed5791 [2.0.x] Fix ambiguous function call (SERIAL_PROTOCOL_F) when using Arduino_Core_STM32 (#11747) 2018-09-10 02:36:06 -05:00
Scott Lahteine d32c4efc77 Fix some trailing whitespace 2018-09-10 01:26:20 -05:00
Alexander Amelkin bc1ba998b2 [2.0.x] Fix undefined symbol 'g29_in_progress' (#11781) 2018-09-09 22:06:03 -05:00
InsanityAutomation bad225dc04 Fix mesh leveling compile errors (#11768) 2018-09-09 04:19:48 -05:00
Sam Lane d783400330 Updates to STM32F7 HAL, for completeness (#11770) 2018-09-09 03:26:15 -05:00
Scott Lahteine 72af8e0f02 Patch extruder_advance_K edit menu 
Fix #11776
 2018-09-09 03:21:08 -05:00
Sebastianv650 7e8c073fba Fix extruder stops extruding with LA (#11758) 2018-09-09 00:04:14 -05:00
Scott Lahteine 0c01099f17 hop_amount => current_hop 2018-09-08 21:20:37 -05:00
Scott Lahteine eafd62308e
Use TMC2208Stepper v0.2.5 (#11714) 2018-09-08 20:41:21 -05:00
Kevin e25d2ae4a2 [2.0.x] SWITCHING_TOOLHEAD (#11623) 2018-09-08 01:43:24 -05:00
Alexander Amelkin f417408df1 [STM32F1] Fix HAL for new PlatformIO (#11749) 2018-09-07 18:15:32 -05:00
Roxy-3D 3d7f2c1fde
Fix directory name to be consistent (#11745) 2018-09-06 14:10:40 -05:00
Roxy-3D a9c98a0e47
Create _Bootscreen.h 2018-09-06 10:24:03 -05:00
Roxy-3D 9f85d3a9cb
Create _statusscreen.h 2018-09-06 10:23:20 -05:00
Roxy-3D e2e7b1d705
Break out support of the T-Rex 3 2018-09-06 10:20:20 -05:00
Roxy-3D 67996c2b66
Break out support for the T-Rex 3 2018-09-06 10:19:05 -05:00
Roxy-3D 9c8d9d282f
Break out support for Formbot T-Rex3 from previous versions 2018-09-06 09:49:04 -05:00
Roxy-3D e3aac59637
Create pins_FORMBOT_TREX3.h 2018-09-06 09:46:23 -05:00
Roxy-3D f580247581
Create pins_FORMBOT_TREX2.h 2018-09-06 09:45:29 -05:00
Roxy-3D 073857646b
seperate the T-Rex2 and T-Rex3 support 2018-09-06 09:43:43 -05:00
Roxy-3D fe4fc2883b
Add support for Formbot T-Rex3 2018-09-06 09:41:59 -05:00
Scott Lahteine 2a61c9a939 Various fixups to configs, spacing, etc. 2018-09-06 06:44:31 -05:00
Scott Lahteine b3efbc6e6e Add MANUAL_E_MOVES_RELATIVE to more configs 2018-09-06 02:09:14 -05:00
Scott Lahteine 679e4602fe Add MANUAL_E_MOVES_RELATIVE to examples 2018-09-06 02:00:25 -05:00
Marcio Teixeira beb51c2d58 Show manual extrusion moves as relative in LCD 
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
 2018-09-06 02:00:25 -05:00
Scott Lahteine d10f29ae2e Pass segment length in G2-G3 2018-09-06 01:43:27 -05:00
Scott Lahteine dcfde2317f
Pass segment length in prepare_kinematic_move_to (#11737) 2018-09-06 01:40:22 -05:00
Roxy-3D d5379ee9d6
Fix search for white space in enqueued commands 2018-09-05 16:57:08 -05:00
Roxy-3D 8d5bea073b
Assume one Max7219 unit if not specified 2018-09-05 14:18:13 -05:00
Roxy-3D 9651ceb36b
Correct spelling of #endif 2018-09-05 10:46:08 -05:00
Scott Lahteine b213a89ef5 Sanity-check NOZZLE_PARK_POINT 2018-09-05 06:18:08 -05:00
Scott Lahteine 86ee74731e Comment for RADDS + RRDFGSC 2018-09-05 05:45:17 -05:00
Kevin ae1271b2ae RADDS: Update Full Graphic Display Pins (#11731) 2018-09-05 03:51:54 -05:00
Scott Lahteine 650d4313c4 Bring some configs up to date 2018-09-05 03:49:24 -05:00
AnHardt 530a13ab6c [2.0.x] SECURITYFIX missing max temp error when PID is used (#11717) 2018-09-05 01:41:45 -05:00
Scott Lahteine 12fded46c2 Correct some FR strings 
Co-Authored-By: pipersw <pipersw@users.noreply.github.com>
 2018-09-04 04:00:22 -05:00
Michael Triffon aefc2f7cf9 Add Anet A2 and A2 Plus Configurations (#11677) 2018-09-03 23:38:51 -05:00
scott0122 72fdb6bab3 Fix SWITCHING_NOZZLE zdiff (#11683) 2018-09-03 23:24:40 -05:00
Scott Lahteine 8b837dc3ad No need for last \n in G-code items 2018-09-03 23:23:20 -05:00
Scott Lahteine d1ceaf5550
[2.0.x] Followup to IDEX changes (#11707) 2018-09-03 23:15:31 -05:00
Roxy-3D d62f4df0b7
Disable LCD Pins used by new Max7219 hook up if in that mode 2018-09-03 09:56:25 -05:00
Roxy-3D fa772c31bf
Provide more options for Max7219 connection on Formbot 2018-09-03 09:52:36 -05:00
Scott Lahteine 8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x 
[2.0.x] Editable servo angles
 2018-09-03 03:55:38 -05:00
Giuliano Zaro 59e76e5fdf [2.0.x] Fix planner computation (#11708) 
Fix #11697
 2018-09-03 00:29:29 -05:00
Roxy-3D 509ee44611
Boot and status file should not have been added to main directory! 2018-09-02 10:25:36 -05:00
Roxy-3D f8abe12a9c
Boot and status file should not have been added to main directory! 2018-09-02 10:25:13 -05:00
Roxy-3D 7680b64aa6
IDEX clean up (#11690) 2018-09-02 10:18:59 -05:00
teemuatlut 49e107cea9 Restrict SW serial to AVR (#11696) 2018-09-01 15:24:44 -05:00
Scott Lahteine 18f1af2dca Fix up Teensy tests, servo sanity 2018-09-01 01:10:20 -05:00
Scott Lahteine 74a04aed55 Fix compile error with NO_LCD_MENUS 2018-08-31 19:16:04 -05:00
Scott Lahteine 509e1cf2bd Add *_DRIVER_TYPE to remaining configs 2018-08-31 19:07:17 -05:00
Scott Lahteine d55f44edba
Printcounter improvements (#11689) 2018-08-31 17:40:39 -05:00
Scott Lahteine 6a3207391f Remove obsolete HAL_timer_restrain 2018-08-31 16:17:22 -05:00
Scott Lahteine e3fc9aa35f Update some config comments 2018-08-31 16:03:44 -05:00
Scott Lahteine 136860e8bb Sanity-check SERVO pin for servo probes 2018-08-31 15:47:47 -05:00
Roman Moravčík 66de50f5f8 Updated slovak translation (#11684) 2018-08-31 15:37:49 -05:00
scott0122 ada85d5585 Improve HOTEND OFFSET Z display precision to 3 (#11686) 2018-08-31 15:15:40 -05:00
scott0122 607c1e58d9 Improve HOTEND OFFSET Z display precision to 3 (#11685) 2018-08-31 15:14:33 -05:00
Scott Lahteine 3e81745e81 Fix issues, make optional 2018-08-29 17:58:02 -05:00
Jan aa80e448e2 Store servo angles in EEPROM 2018-08-29 17:58:02 -05:00
Scott Lahteine 9953213513 Add EDITABLE_SERVO_ANGLES to example configs 2018-08-29 17:57:52 -05:00
Marcio Teixeira 0966bdcbc4 Reorganized ultralcd menu (10317) (#10360) 
Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"
 2018-08-29 16:51:14 -05:00
Scott Lahteine e40a3eef04 Support for Anet A2 Plus 2018-08-29 03:39:43 -05:00
Scott Lahteine 32e38fee74 Update Controller Fan for Y2,Z2 2018-08-29 01:49:48 -05:00
Jeonghwan Roh 59cf217e77 Fix 5 mixing steppers 2018-08-29 01:49:48 -05:00
Scott Lahteine 2a2e8c314e Suppress emergency parser G-code errors 
Co-Authored-By: srieche <srieche@users.noreply.github.com>
 2018-08-29 01:04:55 -05:00
Ilya Bukhonin 7ecb8b4af5 [2.0.x] Teensy 3.1 and 3.2 support (#11460) 2018-08-27 21:49:49 -05:00
Pablo Crespo 409a0632af [2.0.x] Add Morpheus Board support (#11651) 2018-08-27 21:28:03 -05:00
Marcio Teixeira 0f14977b5d LIGHTWEIGHT_UI: Allow feedrate % to exceed 255% (#11656) 
- Changed type of integer used for feedrate percentage from uint8_t to uint16_t.
 2018-08-27 21:26:32 -05:00
scott0122 6dc9553aa5 Fix SWITCHING_NOZZLE compile error (#11657) 2018-08-27 21:25:25 -05:00
Scott Lahteine a15e570d3b Fix SD progress with Lite Status Screen 
Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com>
 2018-08-26 17:12:05 -05:00
Scott Lahteine 66966dbd69 Tweak comments for newer multiplexer 2018-08-25 17:00:49 -05:00
Scott Lahteine 933d833ec8 Tweak some Anet A6 comments 2018-08-24 21:50:53 -05:00
Scott Lahteine d1c9517903 Followup to hotend_offset[Z] patch 2018-08-24 21:32:00 -05:00
Scott Lahteine e2b8fc4f17 Reduce some debug strings 2018-08-24 21:11:39 -05:00
Chris Pepper b71c2b8651 [2.0.x] Update LPC176x tests, fix clean script (#11617) 2018-08-24 18:53:24 -05:00
Scott Lahteine a317bb4991 Remove stray tab 2018-08-24 17:35:13 -05:00
Scott Lahteine acf5ae3083 !ENABLED => DISABLED 2018-08-24 16:36:37 -05:00
Scott Lahteine ba1919c1eb HAL tweaks to LPC1768 main 2018-08-22 17:16:18 -05:00
Scott Lahteine 0987ed2a18 Use American English 2018-08-22 17:16:18 -05:00
Kevin 6483285bc5 HOTEND_OFFSET_Z always available (#11603) 2018-08-22 00:21:29 -05:00
Michael Triffon f8c52c9c29 Azteeg X5 Mini WiFi support (#11601) 2018-08-21 23:58:26 -05:00
jneilliii 3671c63cde Einsy Full Graphic LCD Fix (#11604) 
Fixed issue with LCD timings for Einsy RAMBo board.
 2018-08-21 23:43:52 -05:00
Colin Gilgenbach 593d5375ea Fix G28 resetting DUAL_NOZZLE_DUPLICATION_MODE (#11605) 
There's no reason for G28 to reset DUAL_NOZZLE_DUPLICATION_MODE, because it only affects the E stepper, unlike DUAL_X_CARRIAGE which affects the X steppers as well.
 2018-08-21 23:42:55 -05:00
Scott Lahteine f0dbe61692 Tweaks to motion.h reachable tests 2018-08-21 23:34:29 -05:00
Scott Lahteine 2d3317a35b Prettify Dual X Carriage description 2018-08-21 23:34:29 -05:00
Roxy-3D cd9868f442
Make position_is_reachable() smarter about IDEX machines` 
On many IDEX machines the allowed travel of the X1 carraige and X2 carraige does not perfectly overlap.

This helps the issue.   But more work needs to be done at the higher level.  (For example the X1_MAX_POS should probably be factored into G26's mesh validation pattern.)
 2018-08-21 19:12:26 -05:00
Scott Lahteine 97f6396b25 Fix RE_ARM LCD pins to avoid #undef 2018-08-21 12:47:40 -05:00
Scott Lahteine 0e25f66c09 Fix Ultimaker servo pin 
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
 2018-08-21 11:39:53 -05:00
Scott Lahteine ad12b9b46b Fix indentation, whitespace, spelling, formbot pins... 2018-08-21 09:47:57 -05:00
Scott Alfter b5537dde7f need to add E2END to pins_RAMPS_FD_V2.h (#11564) 2018-08-21 02:16:31 -05:00
Scott Lahteine 8f0bbdcc9b
Fix up Max7219 orientations (#11596) 2018-08-21 02:06:18 -05:00
jmz52 a77f8c6dd5 Implement servo support for STM32F1 (#11580) 
Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.
 2018-08-20 21:13:51 -05:00
Dave Johnson 0456caf0ad Consolidate shared HALs and isolate HAL compile (#11552) 2018-08-20 21:11:12 -05:00
jmz52 dfe18ac633 Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled (#11583) 
The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.
 2018-08-20 20:37:56 -05:00
Roxy-3D b0a8ce59bd
Update Boards.h to include Formbot support 2018-08-20 16:46:27 -05:00
Roxy-3D 62ce937540
Update pins.h to include the Formbot board 2018-08-20 16:44:54 -05:00
Roxy-3D a82be36d5d
Create pins_FORMBOT.h 2018-08-20 16:43:42 -05:00
ghent360 00d24a8219 Don't call __delay_4cycles for 0 cycle delay - takes a really long time. (#11586) 2018-08-18 22:50:11 -05:00
Scott Lahteine 56f1e17a25
[2.0.x] Max7219 cleanup, simplify, and extend (#11575) 2018-08-18 01:33:13 -05:00
jmz52 0b2d686160 Fix "SD init fail" problem for STM32F1 (#11579) 
Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225
 2018-08-17 23:27:10 -05:00
Scott Lahteine a98f21ec5e Marlin assumes signed chars 2018-08-16 22:52:42 -05:00
Kevin db30650731 Fix UBL/Homing (#11566) 2018-08-16 08:28:40 -05:00
Roxy-3D aae4c67e5d
Max7219 Clean Up (#11563) 
Some of the Rotations did not do the right thing with setting and clearing pixels.
I think it is correct now.   But if not...  It is much closer to being correct.
 2018-08-15 21:22:28 -05:00
InsanityAutomation 9de730b2bf Update tool_change.cpp (#11559) 2018-08-15 19:30:52 -05:00
InsanityAutomation c2553f9888 2.0.x - Idex match119 (#11556) 
* Update ubl_G29.cpp

* Update ultralcd.cpp
 2018-08-15 13:26:11 -05:00
Roxy-3D e9de321ac0
declare void Max7219_register_setup(); 2018-08-15 10:36:51 -05:00
Scott Lahteine 952a1bc9d5
Merge pull request #11551 from thinkyhead/bf2_trinamic_fixes 
[2.0.x] Fix TMC2208 SW serial communication
 2018-08-14 19:07:08 -05:00
petrzjunior 67613bf5bd Update Czech translations (#11510) 2018-08-14 18:45:16 -05:00
Scott Lahteine bd6d032628 Update default driver configuration 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-08-14 18:42:04 -05:00
Scott Lahteine 1561e61df7 New TMC2208 constructor 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-08-14 18:41:51 -05:00
Nils Hasenbanck b37bfeffeb [2.0.x] Use the new const functions of the persistentStore api (#11544) 2018-08-14 18:35:36 -05:00
Chris Pepper 5573ef62c6 [2.0.x] PersistentStore update followup (#11549) 2018-08-14 17:54:12 -05:00
Scott Lahteine 846bd24eb9 MALYAN_LCD is ok without SD 2018-08-14 05:31:47 -05:00
Scott Lahteine 834ea7fcea Remove 'const' from PersistentStore::capacity 2018-08-14 04:46:10 -05:00
Dave Johnson c64199941e Compile only selected PIO environment (#11519) 2018-08-14 03:28:52 -05:00
Andy Shaw 5be2559eda Use flash memory to emulate EEPROM (#11500) 
Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.
 2018-08-14 01:19:34 -05:00
Scott Lahteine 6964e1a95a Clean up trailing whitespace 2018-08-14 00:55:37 -05:00
Scott Lahteine 865ee5985f Followup persistent store with heading, const 2018-08-13 23:55:33 -05:00
Scott Lahteine a4b0148365 Easier to find 'static inline' 2018-08-13 23:55:33 -05:00
Scott Lahteine cc0a60453f
Merge pull request #11526 from hasenbanck/eeprom-cleanup 
[2.0.x] Change direct eeprom access to HAL::PersistentStore
 2018-08-13 19:45:10 -05:00
Roxy-3D 65c5227c29
Change M7219 I to setup Max7219 registers, but not do initialization pattern 2018-08-13 17:46:48 -05:00
Nils Hasenbanck 577aeb4aa9 All EEPROM access uses persistentStore 2018-08-13 17:43:35 -05:00
Scott Lahteine 6a8b906318 Followup for persistent_store_api.h 2018-08-13 17:43:35 -05:00
Chris Pepper 66d2b48b59 Update PersistentStore api (#11538) 
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
 2018-08-13 17:30:25 -05:00
Roxy-3D 60f1376798
Make M7219 I more robust and nice to look at 
Make M2719 initialize the Max7219 registers and then run the initialization pattern (if one is specified).
 2018-08-13 16:59:25 -05:00
Roxy-3D fd15b1495a add I parameter to M42 to allow access to sensitive pins 2018-08-13 16:57:09 -05:00
Scott Lahteine 11b411a872 Improve AXIS_DRIVER_TYPE macros 2018-08-13 16:57:09 -05:00
Scott Lahteine f1347f783d Optimize thermistor table 71 
agData in Table 71 is extremely oversampled (see Issue #11220). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.

Co-Authored-By: Aaron Griffith <aargri@gmail.com>
 2018-08-13 02:54:55 -05:00
Scott Lahteine 0bda22367b Allow Einsy RAMBo FAN1_PIN override 2018-08-13 02:49:30 -05:00
Scott Lahteine 1b921b246b Fix pca9632_set_led_color 
…when used with an I2C screen.

Co-Authored-By: soimy <soimy@163.com>
 2018-08-13 02:40:22 -05:00
Scott Lahteine aa9d329560 Reduce max accel in Creality configs 2018-08-11 22:56:51 -05:00
Scott Lahteine c93538e9f3 UBL/planner patch tweaks 2018-08-11 22:50:45 -05:00
Scott Lahteine 0af22549a6 Allow G33 to compile with no LCD 2018-08-11 22:32:09 -05:00
Thomas Moore fc55f1da01 Account for UBL correction when setting the planner position (#11486) 2018-08-10 13:00:50 -05:00
Scott Lahteine b328fb4dc9
Treat TMC2660 like non-TMC (#11508) 2018-08-10 00:30:28 -05:00
Scott Lahteine 72b086b90d Add A5984 to example configurations 2018-08-09 23:04:27 -05:00
Greg Nutt a1a5367380 Smoothieboard V1.0/1.1 and A5984 support 2018-08-09 23:03:17 -05:00
Scott Lahteine f891416e70 No raise on G28 after power-loss 2018-08-07 13:51:36 -05:00
Scott Lahteine e4ecade8d4 Fix AUTO_POWER_CONTROL compile error 
Counterpart to #11467

Co-Authored-By: lsellens <lsellens@users.noreply.github.com>
 2018-08-06 23:20:51 -05:00
Giuliano eee1b7c50c [2.0.x] Fix compile error (#11465) 
Address #11463
 2018-08-06 23:14:53 -05:00
Giuliano e85feb2545 [2.0.x] Better timing handling (#11461) 2018-08-06 23:13:36 -05:00
Scott Lahteine 79835590e3
Easier to disable homing validation (#11458) 2018-08-06 23:11:37 -05:00
Scott Lahteine 131d216afa
Fix drivers.h dependency, defer macro evaluation (#11450) 2018-08-03 21:49:04 -05:00
Scott Lahteine 9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash (#11447) 2018-08-03 20:47:29 -05:00
Scott Lahteine 9bae413901
Add Bigtreetech/BIQU KFB 2.0 board (#11446) 2018-08-03 18:14:26 -05:00
Marcio Teixeira f2224755ad Fix jumping progress bar. (#11439) 
- When LCD_SET_PROGRESS_MANUALLY was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
 2018-08-03 17:17:02 -05:00
Scott Lahteine aae02827c0 Cosmetic pins changes 2018-08-03 17:03:19 -05:00
Scott Lahteine 64c493ad82 MKS_12864_OLED code cleanup 2018-07-30 23:22:40 -05:00
Scott Lahteine b826bf4194
Fix initial safe_speed in jerk code (#11417) 2018-07-30 22:50:08 -05:00
forkoz 2cc950d67e [2.0.x] MKS SBASE Trinamic examples/support (#11402) 2018-07-30 22:48:58 -05:00
Roxy-3D 16432376ab
Revert "[2.0.x]Idex and bl touch fixes" (#11407) 
* Revert "[2.0.x] bltouch home refinements (#11397)"

This reverts commit 74900f7a70.

* Revert "[2.0.x]Idex and bl touch fixes (#11395)"

This reverts commit 6dafb90c01.
 2018-07-28 23:14:46 -05:00
Giuliano 74900f7a70 [2.0.x] bltouch home refinements (#11397) 
Just create  a better functions call logic flow
 2018-07-28 19:30:14 -05:00
silentninja1 6dafb90c01 [2.0.x]Idex and bl touch fixes (#11395) 
* Fix BLTouch homing

Deploy at start, dont call generic stow function at finish or raise goes too high before setting 0

* Update tool_change.cpp

* Update motion.cpp

* Update motion.cpp

* Update motion.cpp

* Update motion.cpp

* Change brackets to be more in align of Marlin coding standards
 2018-07-28 10:33:31 -05:00
Giuliano 5ce5ff8e9b [2.0.x] fix bltouch homing (#11379) 
Partially revert. Seems to solve the issue, but one report says G29 still fails.
 2018-07-27 18:30:08 -05:00
Scott Lahteine 15d68cb496 Pre-override of ST7920 delays before HAL.h 2018-07-26 23:33:18 -05:00
Dave Johnson 8a24ff94d1 AT90USB1286 PIO cleanup and optimization (#11230) 
-normalize `env` and `board` to lowercase naming convention.
-make board `name` follow descriptive convention.
-implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901
-fix typo in 5DPRINT entry.
 2018-07-26 05:58:28 -05:00
Lee Olivares 094e6d81a5 Add Einstart-S support (#11219) 
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
 2018-07-26 05:52:22 -05:00
Scott Lahteine 244b9a8257 Better fastio 1280/2560 pin list 
Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>
 2018-07-26 05:23:51 -05:00
Scott Lahteine 955a7f0ae9
Improve driver.h macros (#11371) 2018-07-26 05:11:22 -05:00
MikeLud aadcf08913 [2.0.x] add Calibrate Z (M915) to Prepare Menu (#11331) 2018-07-26 05:09:49 -05:00
Giuliano 4237c3d9f8 [2.0.x] different bltouch init (#11135) 2018-07-26 05:04:09 -05:00
Andy Shaw 624986d423 Ensure ADC conversion is complete before reading (#11336) 
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.

See: https://github.com/MarlinFirmware/Marlin/issues/11323
 2018-07-26 03:59:19 -05:00
Scott Lahteine e2aa635e70 Fix Anet A6 thermistors 
Co-Authored-By: vitekn <vitekn@users.noreply.github.com>
 2018-07-26 02:02:27 -05:00
Bo Herrmannsen 67b205fd45 Add support for board RuRAMPS4D v1.3 (#11363) 2018-07-25 19:32:27 -05:00
forkoz d1c6687ecd Update MKS sBase pins (#11357) 2018-07-25 19:19:09 -05:00
Scott Lahteine 048dbf6eca
Merge pull request #11275 from thinkyhead/bf2_pwm_adjustments 
[2.0.x] Tweak some SoftPWM code
 2018-07-25 19:02:28 -05:00
Scott Lahteine e05e95cf97 Clean trailing whitespace 2018-07-25 18:49:47 -05:00
Scott Lahteine 22ebbc091f Tweak some SoftPWM code 2018-07-25 18:09:31 -05:00
Scott Lahteine 32de09f5c5 Specify some extra CR-10S pins 2018-07-25 18:08:09 -05:00
J.C. Nelson 9c2bfa2ab3 Remove extra parameter to enqueue. (#11364) 2018-07-25 18:02:02 -05:00
Giuliano bd3ec66a78 [2.0.x] typo fix (#11365) 
Typo fix
 2018-07-25 18:00:47 -05:00
teemuatlut fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
Scott Lahteine e5c0b490c8 Add *_DRIVER_TYPE to example configs 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-07-25 02:47:30 -05:00
Eyal fbdbe53290 Fix get_period_inverse(0) so it doesn't crash (#11334) 2018-07-25 01:58:40 -05:00
Scott Lahteine 14e2b11195 Fix spelling in configs 2018-07-24 21:03:38 -05:00
Scott Lahteine 4685c7d59f Followup to M91x I patch 2018-07-24 18:30:28 -05:00
Roxy-3D 62fa028155
Handle dual gantry machines better 2018-07-24 15:34:53 -05:00
Roxy-3D 09485f63e9
add missing ')' 2018-07-22 10:50:41 -05:00
Roxy-3D a35abce1ac
Fix missing ')' 2018-07-19 19:20:40 -05:00
Scott Lahteine 76d4cfb064 Tweak some Max7219 code 2018-07-19 18:49:39 -05:00
Scott Lahteine 4195757585
Merge pull request #11309 from thinkyhead/bf2_manual_probe_start_z 
[2.0.x] Manual Z Start Height
 2018-07-19 18:26:26 -05:00
Roxy-3D 03b01e2500
Folger Tech i3-2020 now defaults to 2 Max7219 units 2018-07-19 17:02:46 -05:00
Roxy-3D db85ca93c4
Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's 2018-07-19 17:01:31 -05:00
Roxy-3D 9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 (#11285) 
* Add Multi Unit Support for Max7219 to bugfix_2.0.0

* Apply multi-MAX7219 to example configs

* Tweak some spacing, macros
 2018-07-19 13:56:47 -05:00
Scott Lahteine 39c8aed8ba Add MANUAL_PROBE_START_Z to example configs 2018-07-18 21:49:20 -05:00
Scott Lahteine 2106fa26b1 Add MANUAL_PROBE_START_Z for manual probing 2018-07-18 21:49:20 -05:00