zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
11159 commits 1 branch 0 tags 156 MiB
Commit graph

893 commits

Author SHA1 Message Date
Scott Lahteine f1201e11c7 Improve the Jerk description 2016-08-29 12:39:21 -05:00
Scott Lahteine 3f038bef00 Heading for movement settings 2016-08-29 02:01:34 -05:00
Scott Lahteine 01d4703429 PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION 
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
 2016-08-20 23:35:27 -05:00
Scott Lahteine 99b22d5785 Default AUTO_BED_LEVELING_GRID_POINTS to 3 2016-08-19 04:45:32 -05:00
Scott Lahteine e113740fa3 Specify that Z_PROBE_*_HEIGHT is nozzle-relative 2016-08-07 17:54:17 -07:00
Scott Lahteine 7e2bd9a233 Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT 2016-08-03 21:18:38 -07:00
Scott Lahteine 9e21b2e51d Merge pull request #4455 from AnHardt/double-bump-feature 
double bump probing as a feature
 2016-07-29 20:00:10 -07:00
AnHardt 7188ce0ad6 double bump probing as a feature 
Why double touch probing is not a good thing.

It's widely believed we can get better __probing__ results when using a double touch when probing.

Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.

Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.

What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.

So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)

What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
 2016-07-30 03:00:49 +02:00
Scott Lahteine c31f56a38c Deprecate EXTRUDER_WATTS and BED_WATTS 2016-07-29 17:34:14 -07:00
Scott Lahteine ea5ac94804 Improved MANUAL_[XYZ]_HOME_POS 
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
 2016-07-28 19:51:48 -07:00
Scott Lahteine 8953e3e984 Allow Z_SAFE_HOMING without a probe 2016-07-27 04:33:56 -07:00
Scott Lahteine 24a1a16e5d Move versioning to MarlinConfig.h 2016-07-26 12:37:14 -07:00
Scott Lahteine 277899c175 Move include _Bootscreen.h where needed 2016-07-26 12:37:13 -07:00
Scott Lahteine 83c4653c71 Include boards and macros ahead of configs 2016-07-26 12:19:50 -07:00
Scott Lahteine c6226bb0aa Unify config in a single include without nested includes 2016-07-25 23:04:19 -07:00
Scott Lahteine 2d378fac1b No need to include thermistortables.h in Configuration.h 2016-07-25 22:43:50 -07:00
Scott Lahteine 0c0a63322b Patches to prepare REPRAPWORLD_GRAPHICAL_LCD 2016-07-25 12:10:25 -07:00
brupje a60a668f6b Support for REPRAPWORLD_GRAPHICAL_LCD 2016-07-25 12:10:25 -07:00
Scott Lahteine bb9da6ebdd Document DEBUG_LEVELING_FEATURE 2016-07-22 23:37:41 -07:00
Scott Lahteine 194d9521c3 Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe 
Unify run_z_probe
 2016-07-19 19:02:39 -07:00
Scott Lahteine 4a6ed5e221 Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST 2016-07-19 18:42:48 -07:00
AnHardt 09a3cc33e6 Unify run_z_probe 
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
  defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
 2016-07-19 18:42:48 -07:00
Scott Lahteine e44b37cdc2 motion section marker below homing speeds 2016-07-19 17:31:58 -07:00
Scott Lahteine 204fd6ec44 Set homing feedrates individually 2016-07-19 17:31:58 -07:00
Scott Lahteine 6abf916575 Reprapworld Keypad move step is 1mm 2016-07-19 16:40:39 -07:00
João Brázio 47fef80848 Nozzle::clean() no longer requires HAS_BED_PROBE 2016-07-19 15:07:02 -07:00
Scott Lahteine 81e01152bb Merge pull request #4336 from thinkyhead/rc_bltouch_sensor 
BLTouch probe sensor
 2016-07-17 14:06:32 -07:00
Scott Lahteine 1583177ef4 BLTOUCH probe config option 2016-07-17 13:55:38 -07:00
Scott Lahteine 39706f3e57 Endstop invert flags as macros instead of const bool 2016-07-17 13:51:02 -07:00
Scott Lahteine 671634bf11 Fix spacing after section header 2016-07-17 13:35:21 -07:00
Scott Lahteine 22b4cff423 New extruder type configuration options 2016-07-17 00:13:56 -07:00
Scott Lahteine bf16ae5a70 Merge pull request #4299 from jbrazio/feature/g27-park-nozzle 
Implements park nozzle feature
 2016-07-16 23:47:12 -07:00
João Brázio fa4274cf4c Improves the custom bootscreen logo feature 2016-07-17 01:31:44 +01:00
João Brázio 9a00108cb6 Adds the WEBSITE_URL as the boot screen line 2 2016-07-16 12:24:37 +01:00
João Brázio c711701626 Implements a nozzle parking command (G27) 2016-07-16 12:07:59 +01:00
João Brázio 68c343a09a Added G12 configuration options to all configs 2016-07-14 00:38:42 +01:00
João Brázio 021544f572 Improves G12 zig-zag pattern 2016-07-13 21:14:56 +01:00
João Brázio b05a75655a Implements a nozzle cleaning pattern generator (G12) 2016-07-13 21:14:19 +01:00
Scott Lahteine a8b6b6a128 Merge pull request #4252 from thinkyhead/rc_rename_hpb 
Replace PLA/ABS preheating with generic
 2016-07-12 20:00:33 -07:00
Scott Lahteine 928ff6487a Greek language pack from @psavva 2016-07-10 18:59:04 -07:00
Scott Lahteine 182c8d7f8f Dyze High Temp Thermistor Support 2016-07-10 17:59:05 -07:00
Scott Lahteine 1026e5b071 Replace PLA/ABS preheating with generic 2016-07-09 18:06:51 -07:00
Petr Zahradnik e282d69f63 Print job timer comment changed 2016-07-09 17:57:54 -07:00
Scott Lahteine 683975cf90 Fix spelling in a config comment 2016-06-28 16:49:13 -07:00
Scott Lahteine 10da7ac86c Combine Z raise before/after options 2016-06-26 13:56:30 -07:00
Scott Lahteine 03c70c1990 SERVO_DEACTIVATION_DELAY => SERVO_DELAY 2016-06-23 14:33:29 -07:00
Scott Lahteine bd01592816 Goodbye MECHANICAL_PROBE 2016-06-22 17:13:33 -07:00
Scott Lahteine b590a7dee0 Make Z_RAISE_BETWEEN_PROBINGS a more general option 2016-06-22 14:00:44 -07:00
Scott Lahteine d50539583a Make XY_PROBE_SPEED a general probe option 2016-06-22 03:04:47 -07:00
Scott Lahteine 2798499b71 XY_TRAVEL_SPEED => XY_PROBE_SPEED 2016-06-22 02:45:25 -07:00
esenapaj d583ea852d Standardize format description of Panel 2016-06-21 20:51:27 +09:00
Scott Lahteine 3996242e9d Allow Z_MIN_PROBE_REPEATABILITY_TEST solo 2016-06-21 01:56:40 -07:00
Scott Lahteine 9beb3f2f5e Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup 
FIL_RUNOUT_INVERTING false by default
 2016-06-19 19:46:14 -07:00
Scott Lahteine f215b30932 Merge pull request #4093 from thinkyhead/rc_probe_without_abl 
Make Z Probe options independent of ABL
 2016-06-19 19:44:25 -07:00
Scott Lahteine dfbf8b3c2c FIL_RUNOUT_INVERTING false by default 2016-06-19 19:25:26 -07:00
Scott Lahteine de12228758 Make Z Probe options independent of ABL 2016-06-19 18:47:27 -07:00
Scott Lahteine f8c278ce4d Cartesio UI display option in all configs 2016-06-19 17:39:46 -07:00
Scott Lahteine bd4ec727e7 Merge pull request #4066 from thinkyhead/rc_M851_with_probe 
Make M851 standard with a bed probe
 2016-06-17 17:32:55 -07:00
Scott Lahteine fc56a547d1 Rename movement section to motion 2016-06-17 15:19:43 -07:00
Scott Lahteine 1000563d80 Make M851 standard with a bed probe 2016-06-17 15:19:42 -07:00
Scott Lahteine 47ce810f52 Remove support for XY servo endstops 2016-06-17 14:19:17 -07:00
Scott Lahteine 02e5dad29a Include Croatian in language listings 2016-06-16 16:18:26 -07:00
João Brázio 8ccd97e7cc
Updated all example configuration files 2016-06-12 00:36:15 +01:00
João Brázio de8108648f
Added a versioning system to the config files 2016-06-11 23:48:10 +01:00
Reid Rankin 16212432c9 G20/21 and M149 support, and code_value() refactor 
This is an update of MarlinDev PR #196.

G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.

In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
 2016-06-08 16:51:10 -07:00
Scott Lahteine cd441ce652 SINGLENOZZLE: EXTRUDERS versus HOTENDS 2016-06-03 17:38:03 -07:00
Scott Lahteine db0fd021d0 Z raise options independent of ABL so G28 can use them 2016-06-02 16:56:49 -07:00
Scott Lahteine 28fb1f8994 Tweak #endif comment for ABL GRID 2016-06-02 16:56:49 -07:00
Scott Lahteine a0b000d752 Support for SAV_3DGLCD OLED LCD controller 2016-05-31 14:41:16 -07:00
Edward Patel eb2746a34f MBL: Fix for negative x/y positions 2016-05-28 21:05:43 +02:00
Scott Lahteine fe3122774a Merge pull request #3806 from thinkyhead/rc_coreyz_support 
Support for COREYZ. Fixes for COREXY, COREXZ
 2016-05-26 18:50:43 -07:00
Scott Lahteine 89e630b2fb Merge pull request #3808 from thinkyhead/rc_singlenozzle 
SINGLENOZZLE
 2016-05-23 15:52:19 -07:00
Scott Lahteine 95fee8ca81 Add option for CoreYZ kinematics 2016-05-23 13:58:40 -07:00
Scott Lahteine c5130fd23b Additional instructions for controller reverse options 2016-05-20 18:14:50 -07:00
Scott Lahteine 69abfef82e Add "SINGLENOZZLE" extruder option 2016-05-20 15:45:11 -07:00
Scott Lahteine 37c6d0f4ed Reword MESH_G28_REST_ORIGIN comment 2016-05-20 11:52:27 -07:00
Edward Patel c7d90dc5ec Add option to configure G28 all axis resting position for MBL 2016-05-20 11:52:27 -07:00
João Brázio f9a62f6a8e Added PRINTJOB_TIMER_AUTOSTART section to example config files 2016-05-14 15:22:45 -07:00
João Brázio 8a18c52002 Adds an option to disable print job timer auto start 2016-05-14 15:22:44 -07:00
Scott Lahteine f13c4a9ec4 Merge pull request #3720 from jbrazio/feature/host-keepalive 
Removes the DISABLE from HOST_KEEPALIVE
 2016-05-14 14:39:31 -07:00
Scott Lahteine 14cd0f4c92 Merge pull request #3740 from thinkyhead/rc_lcd_home_options 
Individual Axis Homing LCD menu items
 2016-05-12 11:59:46 -07:00
João Brázio 09150cae79 Individual Axis Homing LCD menu items 2016-05-11 19:28:19 -07:00
Scott Lahteine 4dc4e2063f Add REVERSE_ENCODER_DIRECTION option 2016-05-11 15:39:28 -07:00
João Brázio 85b2c80838
Updated example configurations 2016-05-11 01:45:49 +01:00
João Brázio ac7f634956
Removed the DISABLE from HOST_KEEPALIVE_FEATURE option 2016-05-11 01:45:49 +01:00
João Brázio aa5a4716cf
Update default config 2016-05-10 13:37:21 +01:00
esenapaj 212b17d510 Fix for PR #3526(Configuration.h LCD & SDCard s... 
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)

It removes duplicated BQ_LCD_SMART_CONTROLLER.
 2016-05-03 21:35:02 +09:00
Scott Lahteine c3ef9993b9 Merge pull request #3625 from jbrazio/feature/print-counter 
Print job statistics
 2016-04-29 15:31:14 -07:00
João Brázio e34f4653ef
Fixed a typo on the configuration files 2016-04-29 23:13:59 +01:00
João Brázio e2da7e5000
Updated the default configuration and fixed a printcounter.h typo 2016-04-29 23:13:58 +01:00
Scott Lahteine 924285afa6 Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc 
Correct the REVERSE_MENU_DIRECTION comment
 2016-04-28 20:28:46 -07:00
Scott Lahteine f1b00eb12b Correct the REVERSE_MENU_DIRECTION comment 2016-04-28 20:27:17 -07:00
Scott Lahteine 0c11566f42 Replace LANGUAGE_INCLUDE with LCD_LANGUAGE 2016-04-27 20:06:40 -07:00
Scott Lahteine 259794c0be Make DISPLAY_CHARSET_HD44780 a single setting 2016-04-27 20:06:40 -07:00
João Brázio 170f7e8a45
Rework Marlin's versioning system 2016-04-24 05:21:17 +01:00
Scott Lahteine 0c2aa92b07 Z Safe Homing for all 
The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so
make it available for general use.
 2016-04-20 17:04:52 -07:00
Scott Lahteine ef2fd620e9 Suggested fixups for LCD/SD config comments 2016-04-16 19:35:02 -07:00
João Brázio 7b5d6ba315 Rebase & feedback 2016-04-16 19:35:02 -07:00
João Brázio 36a49eab1c Improved the LCD and SD comments blocks in Configuration.h 2016-04-16 19:32:41 -07:00
Scott Lahteine a8e4d7c135 Merge pull request #3477 from alephobjects/BedTempHysteresis 
Implementation of M190 bed temp hysteresis
 2016-04-15 16:20:58 -07:00
Scott Lahteine 1cc622b167 Fix minor spelling in comments 2016-04-14 20:06:59 -07:00
Scott Lahteine de8c0baf8b Update some comments in Configuration.h 2016-04-14 16:41:20 -07:00
gralco 69c00aea4c Include bed hysteresis setting in the example configs 2016-04-14 08:03:38 -06:00
Scott Lahteine f8e10ff1d8 Merge pull request #3491 from thinkyhead/rc_mechanical_probe 
Support for "mechanical probe" with Allen Key as a special case
 2016-04-13 20:55:14 -07:00
Scott Lahteine 7eb476597f Update some comments in Configuration.h 2016-04-13 20:34:42 -07:00
esenapaj 2eb1b102f8 Support for "mechanical probe" with Allen Key as a special case 2016-04-13 20:34:12 -07:00
gralco 178aeb79c8 Implementation of M190 bed temp hysteresis 2016-04-12 08:56:14 -06:00
Scott Lahteine 2eca8d63b3 Add DEFAULT_KEEPALIVE_INTERVAL setting 2016-04-07 19:25:56 -07:00
Scott Lahteine e5771346a4 Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags 2016-04-02 16:39:23 -07:00
Scott Lahteine ffe054c129 Fix comment about host keepalive interval 2016-04-01 17:28:08 -07:00
Scott Lahteine 1a79b13b7a FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR 2016-03-29 20:54:31 -07:00
Scott Lahteine 53cc6cca46 Formalize some dependencies on PIDTEMPBED 2016-03-25 23:50:28 -07:00
Scott Lahteine 4b31c67dce Add PID_AUTOTUNE_MENU option 2016-03-25 19:31:56 -07:00
Scott Lahteine 0da744b7b0 Further cleanup of comments, partial Doxygen-style 
Following up on #3231
 2016-03-25 00:45:56 -07:00
jbrazio 5e5d250832 Added gplv3 header to all Marlin files 2016-03-24 18:01:20 +00:00
Scott Lahteine da9d4c4caf Merge pull request #3206 from esenapaj/patch-5 
Follow-up the PR #3082, etc
 2016-03-24 00:20:25 -07:00
esenapaj fc75e6f92d Follow-up the PR #3082, etc 
Follow-up the PR #3082
Follow-up the commit 143ad74: unnoticed updates
Fix for commit b0f5ba0: Z offset: -front [of the nozzle] +behind -> Y offset: -front [of the nozzle] +behind
Standardize the writing method: Z-probe, z-probe -> Z Probe
Adjust spacing
 2016-03-22 20:22:01 +09:00
esenapaj 22299c13c1 Change link to the document 
documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757,
but http://www.marlinfirmware.org/ isn't working.
 2016-03-22 19:58:41 +09:00
Scott Lahteine be08eb6153 Merge pull request #3194 from jbrazio/feature/add-pt_pt-utf8 
Add pt_pt-utf8 language pack and fix some minor compiler warnings
 2016-03-20 17:42:45 -07:00
Scott Lahteine d1ff7959b7 Merge pull request #3188 from esenapaj/patch-1 
follow-up the commit b82d91e
 2016-03-20 17:39:52 -07:00
Scott Lahteine 1cc316f1fd Merge pull request #3082 from thinkyhead/updated_2820 
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
 2016-03-20 17:10:38 -07:00
jbrazio 92a7d4515a Missing coma comment correction for the default cofig file 2016-03-20 23:23:11 +00:00
jbrazio 68dda08fff Added pt_pt-utf8 language pack; Fixed some minor compiler warnings; Harmonize file suffix for the current existing UTF8 language packs; Updated all configuration files to reflect the new language packs 2016-03-20 23:14:24 +00:00
esenapaj 468df96b0f follow-up the commit b82d91e 
follow-up the commit b82d91eca6
 2016-03-20 20:57:14 +09:00
Scott Lahteine 32f75749e4 Merge pull request #3117 from Blue-Marlin/thermal-protection 
Improve the descriptions for THERMAL_PROTECTION
 2016-03-19 23:41:05 -07:00
Scott Lahteine 4119cef32f Merge pull request #3180 from clexpert/RCBugFix 
Czech language specific changes
 2016-03-19 20:18:05 -07:00
CoderSquirrel eda95d8bed Add support for LCM1602 16x2 I2C LCD adapter 2016-03-19 19:26:44 -07:00
Petr Zahradnik 98392782ea Update Configuration.h 2016-03-19 20:45:13 +01:00
Blue-Marlin 3166aed087 Improve the descriptions for THERMAL_PROTECTION 2016-03-19 14:08:59 +01:00
AnHardt 3f45a1acf9 Check probes only when deployed 
Aim: Test probes in update_endstops only when activated

Changes:
Configurations
 Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
 Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
 Add some comments
 Shift some entries to have related things together.

Conditionals.h
 We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.

SanityCheck.h
 Add some tests if the probe is connected and if we have defined a probe.

stepper.cpp
 Changes to test the probe only when it is deployed (z_probe_is_active).
 Test update_endstops() when the probe is deployed.

MarlinMain.cpp
 a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
 b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
 c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
 d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.

 To do: In another PR. handle all probes in deploy/stow_z_probe.
 Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
 2016-03-19 02:00:08 -07:00
Scott Lahteine 7ec7bb31c4 Send a Busy signal to hosts during long processes, wait for input, etc 
If Marlin is blocking the serial input or command queue for any length
of time (for example more than 2 seconds), it needs to send a message
to serial out to inform the host that it is busy. Marlin should only
send these messages out when busy, and preferably not when trying to
print formatted output.
 2016-03-18 22:38:35 -07:00
Scott Lahteine b8b51d8da8 Add the REVERSE_MENU_DIRECTION option 2016-03-16 04:02:40 -07:00
Scott Lahteine 1c384930f3 Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion 
Wrap macros to prevent bad expansions
 2016-03-15 00:25:34 -07:00
Scott Lahteine 30c3a21d1f Merge pull request #3112 from thinkyhead/rc_support_MAX31855 2016-03-13 03:30:48 -07:00
Scott Lahteine f9ded2a7c4 Wrap macros to prevent bad expansions 2016-03-12 22:38:55 -08:00
Scott Lahteine 27f244ba2c Support MAX31855 as Temperature Sensor -3 2016-03-10 02:49:54 -08:00
Scott Lahteine ce639b8b03 Group FILAMENT_SENSOR options together 2016-03-10 02:41:37 -08:00
AnHardt fd5414c6ea Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING 
rebased
corrected spelling
changed to #elif for error

Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.
 2016-03-08 17:50:23 +01:00
Scott Lahteine cf792fd8d8 Update configurations to use RAMPS 1.4 2016-03-06 05:52:01 -08:00
Scott Lahteine 13ef12ad3f Fix power calculations 
As suggested by @max-pau in #3073 - #3074
 2016-03-06 05:51:59 -08:00
jbrazio 143ad74db7 Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config 
files.
 2016-03-06 05:51:58 -08:00
jbrazio b0f5ba0232 Update the PROBE_OFFSET_FROM_EXTRUDE comment section 
This changes have being discussed at MarlinFirmware/Marlin#2849.
 2016-03-06 05:51:57 -08:00
Scott Lahteine e7cf85b922 Merge pull request #3013 from thinkyhead/esenapaj-patch-1 
Enhanced #3010 - formal Mesh/Manual dependency
 2016-03-06 00:30:02 -08:00
Scott Lahteine eb85342fd9 Merge pull request #2989 from AnHardt/fix2661 
Pre home display - Stepper release
 2016-03-05 21:30:17 -08:00
Scott Lahteine 772460a7b8 Various minor spelling corrections 
Redo of #2939 rebased against RCBugFix
 2016-03-05 20:41:15 -08:00
AnHardt 615bec2329 Activate warning about possible reduced accuracy by default 
Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING`

Changed the condition for blinking from
```
#if ENABLED(WARN_REDUCED_ACCURACY)
```
to
```
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
```
 2016-02-28 23:20:21 +01:00
AnHardt 5b0f659355 Changes for graphics displays 
Replaced displaying "---" instead of the value of a coordinate when
unhomed or with reduced precision
with blinking the coordinate-prefix-character ('X','Y','Z').
For "unhomed" a '?' is shown every second second - until that axis is
homed. The value displayed is, as before the "---" where displayed, the
relative to the reset position coordinate value.
When the axis stepper was disabled, now we can display a hint on that,
by showing a blinking ' ' instead of the axis letter, when
WARN_REDUCED_ACCURACY is defined.

I suppose the code itself is here the better documentation.

A '+/-' character is in non of our charsets so i decided for a '?' for
now to reduce the work.
There is no additional space on the displays one could use to display
the information, so replacing something is the only option. As the axis
letters are totally redundant with their positions on the display they
contain the least information.
So my decision was to overwrite them.
 2016-02-28 23:19:32 +01:00
AnHardt b6e69e71ce Make stepper shutdown after inactivity dependent 
Make stepper shutdown after inactivity dependent on a new set of
#defines.
DISABLE_INACTIV_X
DISABLE_INACTIV_Y
DISABLE_INACTIV_Z
DISABLE_INACTIV_E

And make exemplaric Configuration.
Names can be discussed.

This makes the disabling of the steppers independent from the DISABLE_?
settings witch shut down the steppers immediately.
 2016-02-28 16:58:42 +01:00
Scott Lahteine c2e5c6c12c Nest Manual Bed Leveling options 
This formalizes the dependency of MANUAL_BED_LEVELING on
MESH_BED_LEVELING
 2016-02-20 20:35:10 -08:00
Scott Lahteine b19b272172 Update configurations with SPI_SPEED 
- Include aligned comment about new SDSUPPORT behavior
 2016-02-17 14:54:09 -08:00
Scott Lahteine 159ff94afd Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977 2016-02-07 08:02:11 -06:00
Richard Wackerbarth 1635613c25 Backport cosmetic 2015-12-10 07:20:52 -06:00
Richard Wackerbarth e7b40bbe98 Change link to U8glib source 2015-12-10 06:33:29 -06:00
Scott Lahteine 9b23490f01 Clean up spacing in configs 2015-11-12 00:03:21 -06:00
KiteLab 0ad25c6665 Hint for changed behaviour of SDSUPPORT 2015-09-28 11:07:33 -05:00
Richard Wackerbarth e01f5e1ef7 Cleanup 2015-09-17 10:44:23 -05:00
Mike Cochrane 5e36b64635 SDEXTRASLOW for some SD card readers (PR#176) 
Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL
 2015-09-14 07:58:08 -05:00
Richard Wackerbarth 20b4772155 Create DEBUG_LEVELING_FEATURE 2015-08-27 20:52:08 -05:00
Richard Wackerbarth 6292d9e815 Rename ENABLE_AUTO_BED_LEVELING 
With the introduction of the #if ENABLED(…)

reads better than
 2015-08-27 20:52:08 -05:00
Christian Lefrançois 9897a9147c Update ABL comments (PR#95) 
* Updates the auto bed leveling comments ONLY.
* Renames "Z probe" word usage in //comments and #errors properly.
 2015-08-26 05:51:38 -05:00
AnHardt e2d69f66b2 Make Z_PROBE a Z_MIN_PROBE (PR#65) 
Currently we use the probe exclusively as a device to find the build platform(bed).
For the currently supported setups this means, we use it as a additional min-endstop.
A triggered when not deployed probe disturbs the homing process for max-endstops.

Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE
Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP
Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Adjust comments accordingly
Remove Z_MAX  check for the probe in update_endstops().

Using an delta related idea of @clefranc from #61,
extended to the general change for all setups.

Tested with Prusa i3, max-z-endstop and permanently triggered z-probe.
Worked for @clefranc's delta.
 2015-08-11 14:41:36 -05:00
Richard Wackerbarth b227d8c128 Supply a VERSION in a short form for displays 
The long descriptor will still be available in M115
 2015-08-03 08:21:09 -05:00
Richard Wackerbarth 329acc852e Canonize Option flag USE_AUTOMATIC_VERSION 2015-08-03 08:08:37 -05:00
AnHardt 09571b7753 Boot-screen for the character displays 
Uses about 488 byte of progmem and 32 byte of RAM.
For that configurable.
 2015-08-03 07:13:00 -05:00
Scott Lahteine 1e2deff4fd Rename BTENABLED to BLUETOOTH 
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
 2015-08-02 22:56:50 -05:00
Scott Lahteine 270c766de2 SDCARDDETECT -> SD_DETECT, added docs 
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
 2015-08-02 21:59:41 -05:00
Scott Lahteine 37d1879386 Apply overridables to Configuration files 2015-07-31 00:03:36 -05:00
Scott Lahteine edaaead7e0 Fix comment about SERVO_ENDSTOP_ANGLES 2015-07-30 23:35:57 -05:00
Scott Lahteine 0af2a80e06 Make SERVO_ENDSTOP_ANGLES 2-dimensional 2015-07-30 16:38:56 -05:00
Richard Wackerbarth ae00fad75b Rename as M100 2015-07-27 20:31:59 -05:00
Richard Wackerbarth ed7d45e8f5 Memory watcher 2015-07-27 20:31:59 -05:00
AnHardt fd0e81b0c7 Distinguish between BUZZER and SPEAKER (PR#2513) 
A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC.
A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC.

There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer.
To make these board able to handle a speaker

* replace the PWM based tone()-function again with a on-delay-off-delay loop.

Hopefully the last time I touch the beeper code.
 2015-07-24 22:10:04 -05:00
AnHardt 8b876241bd Some more servo code tweaks 
Just set up the pin. Don't move to a random position.

Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.

SERVO_LEVELING is the wrong condition to deactivate the servos.

Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
 2015-07-24 22:04:49 -05:00
AndySze 00dbf69b6d add MINIPANEL defines 2015-07-23 22:51:40 -05:00
AnHardt 4e14e152fa Add Travis tests for CORXY and COREXZ 2015-07-23 19:52:48 -05:00
Scott Lahteine d85861d296 Move macros, add ENABLED/DISABLED, add includes 2015-07-22 18:16:05 -05:00
Scott Lahteine 129f986ccf Add COREXZ option to configurations 2015-07-19 16:17:03 -05:00
Scott Lahteine 391386dd94 Update configs for new servo deactivation 2015-07-15 19:13:40 -05:00
AnHardt 5243d8b523 Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default 2015-07-15 17:39:43 -05:00
AnHardt 49609f6c14 Activate the new servo.move() function 
by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp
and removing the old configuration in the ABL part of Configuration.h
 2015-07-15 17:39:43 -05:00
AnHardt 40b6edcad7 Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h 
DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY.
But it will work on all servo moves, not only the probe servo moves.
 2015-07-15 17:39:43 -05:00
Scott Lahteine c3c605c658 Move note about LiquidTWI2 to Configuration.h (PR#2406) 2015-07-09 05:33:17 -05:00
Scott Lahteine dc40a5f6e0 Patch up more outdated config lines 2015-06-15 20:20:32 -05:00
Scott Lahteine a274769f4f Clean up spacing and comments 
Also clean up some trailing spaces in a few other sources
 2015-06-15 20:20:31 -05:00
Scott Lahteine d3bce05d54 Fix up spacing for filament sensor values 2015-06-15 20:20:31 -05:00
Scott Lahteine b4b10a57fe Fix configurator section directives and values lists 2015-06-15 20:20:31 -05:00
Scott Lahteine bba14dcbe6 Move Z Safe Homing point to the middle of the movement range 2015-06-15 20:20:31 -05:00
Richard Wackerbarth 58941e543e ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed 
#defining something just to define something else doesn’t
make sense

If you want SDCARDDETECTINVERTED, just define it yourself.

If the previous code was intended to define, undefined and then again define the term, that code is improper.
 2015-06-06 21:44:59 -05:00
Ed Boston b94a0e1501 Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED 
The new define allows the sd card detect to be inverted or not from
Configuration.h
 2015-06-06 16:40:31 -05:00
AnHardt d1f4471000 Merge pull request #2146 from Wackerbarth/Versioning 
Versioning
 2015-06-02 18:31:21 +02:00
fmalpartida 11e3f3375d Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing 
Updated LCD wiki location.
 2015-05-31 21:20:26 +02:00
fmalpartida 93da52d011 Added support for OLED SSD1306 I2C based LCDs. 2015-05-31 18:53:29 +02:00
Jonathan Bastien-Filiatrault e86f2342c0 Separate the maximum integral power for the bed from PID_INTEGRAL_DRIVE_MAX / PID_MAX. 
My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed
to reach its intended temperature. The head requires a low maximum power since
I run on 24 volts and it has a somewhat low thermal mass.
 2015-05-28 11:48:04 -04:00
Richard Wackerbarth 5ea139fd79 Revised Versioning mechanism 2015-05-25 15:53:14 -05:00
Scott Lahteine 38cc0b93c6 Merge pull request #1874 from AnHardt/Bulgarian 
Introduction of Bulgarian - language_bg.h
 2015-05-22 13:59:50 -07:00
Ed Boston 152b681bb5 Added link to controller github 
Added the link to the github information about the
ELB_FULL_GRAPHIC_CONTROLLER
 2015-05-19 04:14:55 -07:00
AnHardt e353d27430 Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian 2015-05-18 23:56:53 +02:00
Ed Boston ca8d1756d5 Define fixes 
Fixed a couple defines that were not changed or commented out.
 2015-05-18 14:23:31 -07:00
Ed Boston a83bf18ee1 More functional seperation 
Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h.
Added U8GLIB_LM6059_AF to define display specific actions.
Added reminder to compile in u8glib
 2015-05-18 05:37:46 -07:00
Ed Boston 047e688e93 Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER 
Rename of define to avoid confusion between the controller and the
display which had similar names.
 2015-05-17 15:23:17 -07:00
Ed Boston 1999ac415c Formatting Changes 
Fixes for some code formatting changes and commenting out the
ADAFRUIT_ST7565 define that was left defined.
 2015-05-17 13:39:24 -07:00
Ed Boston 41f8cdb3a6 ADAFRUIT_ST7565 
Added support for new display type
 2015-05-17 12:47:41 -07:00
Scott Lahteine 78beef2d73 Use Mendel default for INVERT_Y_DIR 2015-05-14 00:25:47 -07:00
Scott Lahteine f65833931d Formatting tweaks 2015-05-13 02:02:19 -07:00
Scott Lahteine 2445ae3d3a Combine thermal runaway and watch-period 
- Make thermal protection for all hotends and/or bed into simple
switches
- Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is
enabled
- Move detailed thermal parameters to `Configuration_adv.h`
- Add sanity checks to warn about old configurations
- Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds
 2015-05-10 22:52:01 -07:00
Scott Lahteine 7f3252eea9 Merge pull request #1999 from paclema/Filrunout_configurable_script 
Added configurable script for filrunout from configuration.h
 2015-05-08 04:39:59 -07:00
Scott Lahteine 181ccc884c Edit thermal runaway description 2015-05-07 20:46:03 -07:00
paclema 26015b02d8 Fixed typo and updated Configuration.h of configurator 2015-05-03 02:39:34 +02:00
paclema aedd580911 Updated all configuration.h examples 2015-05-03 02:28:43 +02:00
Scott Lahteine 425cd46c12 Merge pull request #1993 from AnHardt/TRP-bed 
Enable TRP for the bed
 2015-04-29 19:44:50 -07:00
paclema 013a09dbe6 Added configurable script for filrunout form configuration.h 2015-04-29 21:38:40 +02:00
AnHardt 514d8ac460 Enable TRP for the bed 
in all Configurations.
 2015-04-29 08:47:01 +02:00
Scott Lahteine 2610b8d047 Enable thermal runaway protection by default 2015-04-28 17:40:29 -07:00
AnHardt b4b19a6cbd Merge https://github.com/MarlinFirmware/Marlin into Bulgarian 
Conflicts:
	Marlin/Configuration.h
	Marlin/configurator/config/Configuration.h
	Marlin/example_configurations/Felix/Configuration.h
	Marlin/example_configurations/Felix/Configuration_DUAL.h
	Marlin/example_configurations/Hephestos/Configuration.h
	Marlin/example_configurations/K8200/Configuration.h
	Marlin/example_configurations/SCARA/Configuration.h
	Marlin/example_configurations/WITBOX/Configuration.h
	Marlin/example_configurations/delta/generic/Configuration.h
	Marlin/example_configurations/delta/kossel_mini/Configuration.h
	Marlin/example_configurations/makibox/Configuration.h
	Marlin/example_configurations/tvrrug/Round2/Configuration.h

Conflicts with my Chinese implementation resolved.
 2015-04-28 09:24:32 +02:00
Scott Lahteine 0970102950 Remove obsolete STRING_URL 2015-04-27 21:59:14 -07:00
AnHardt 6b1b71837c Intit. commit for Chinese 
Edited the European part of 'ISO10646_CN.fon' to match the existing fonts.
Added Chinese font to make_fonts.bat
Created 'dogm_font_data_ISO10646_CN.h'
Added Chinese to 'language.h'
Added 'language_cn.h' with some minor edits.
Added Chinese font in 'language_en.h' to not fall back to European font.
Added cn to 'Configuration.h'
Changed WIDTH to LCD_PIXEL_WIDTH and HEIGHT to LCD_PIXEL_HEIGHT to have more descriptive names.

In 'dogm_lcd_implementation.h'
Added Chinese Font
Made 1 pixel more room for the larger Chinese font on the status line.
Changed geometry of the 'select bar' by one pixel.
Changed the way the position for values and postcars are set.
 2015-04-27 12:15:36 +02:00
Scott Lahteine 5c29fda167 Add a warning for DISABLE_[XYZ] options 2015-04-25 00:46:33 -07:00
AnHardt 3a27a78f9e Commented REPRAP_DISCOUNT_SMART_CONTROLLER again 
and removed some tabs.
 2015-04-20 15:01:43 +02:00
AnHardt 064f2b37d0 More Beeper clean up. 
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().

Enforced max. duration for M300 to 5 seconds.

Corrected description in 'Configuration.h'

LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
 2015-04-20 11:11:13 +02:00
Scott Lahteine 74e4b42f7e Default MACHINE_NAME to "3D Printer" 2015-04-12 17:17:41 -07:00
Scott Lahteine ccbe2c4ea3 Apply CUSTOM_MACHINE_NAME to configurations 
- Replace “Mendel” with “RepRap”
 2015-04-10 21:29:42 -07:00
AnHardt 56fc3a4835 bgr -> bg 
+ update in documentation
 2015-04-09 13:09:18 +02:00
AnHardt 6248c93f37 Introduction of Bulgarian - language_bgr.h 
Thank you @Nprod!
 2015-04-09 01:26:48 +02:00
Edward Patel 7dc64efe67 Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS 2015-04-08 20:52:48 +02:00
Scott Lahteine 4788b59300 Thermistor values for configurator 2015-04-08 03:12:21 -07:00
Scott Lahteine 7431ef7e2d Merge branch 'Development' into dev_version 
Latest upstream commits
 2015-04-07 21:14:00 -07:00
Scott Lahteine eb6e3886f4 Set version to "1.0.3 dev" 2015-04-07 20:38:43 -07:00
Edward Patel a9ed39b12d Moved checks into SanityCheck.h + removed previous added checks. 2015-04-07 22:58:08 +02:00
Edward Patel 002340f32c Merge branch 'Development-Marlin' into Development 2015-04-07 22:49:12 +02:00
Scott Lahteine 967db181d0 Latest upstream commits 2015-04-06 21:46:18 -07:00
Edward Patel d27c82a450 Added check for Delta printers in Mesh, #error not yet supported. 2015-04-06 23:03:06 +02:00
Edward Patel 9a093b2e8f Added #error + mention not to enable ABL and Mesh at the same time 2015-04-06 19:38:59 +02:00
Richard Wackerbarth 46474cf2f2 Incorporate @section headers from configurator 2015-04-05 22:39:40 -05:00
Edward Patel d24ea7c03f Added Comment in hope of github seeing these updates 2015-04-05 05:14:06 +02:00
Edward Patel ea10601406 Merge branch 'Development-Marlin' into Development 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
 2015-04-05 04:06:02 +02:00
quillford b02a55e60f Fixed scara directions 
Config said for a delta instead of for a scara
 2015-04-04 15:26:35 -07:00
Scott Lahteine c065da52ec Spacing and spelling 2015-04-03 22:54:48 -07:00
Scott Lahteine e0d4368cb5 Minor code cleanup, move NUM_AXIS out of config 2015-04-03 20:45:24 -07:00
Scott Lahteine a469d796e1 Add cleanups needed for #1772 2015-04-03 18:14:57 -07:00
Scott Lahteine c0ca26cd50 Merge branch 'Development' into fixup_probing 
Latest upstream commits
 2015-04-03 18:05:17 -07:00
Scott Lahteine 0e8182bbf2 Additional pin tests, cleanup 2015-04-03 15:31:35 -07:00
Edward Patel 6b91b7b411 Mesh bed leveling: Added G29 S3 + finer steps in manual probing. 
* Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually
* Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h
 2015-04-01 21:18:51 +02:00
Chris Roadfeldt a57862e29f Cleaning up code in prep for merge with upstream. 2015-04-01 11:40:24 -05:00
Chris Roadfeldt a508d835db Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP. 
Updated documentation in Configuration.h.
Cleaned up and commented some code relating to Z_PROBE_ENDSTOP.
Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.
 2015-04-01 02:14:55 -05:00
Chris Roadfeldt c89b8368ee Merge remote-tracking branch 'MarlinFirmware/Development' into Development 
Conflicts:
	Marlin/Marlin_main.cpp
 2015-03-31 11:08:36 -05:00
Scott Lahteine 6ff1620fcb Merge pull request #1753 from thinkyhead/fix_extruder_offset 
Fix EXTRUDER_OFFSET compiler error
 2015-03-31 03:21:45 -07:00
Scott Lahteine cda4bd4ad9 Correct the comment about M206 2015-03-31 03:20:15 -07:00
Scott Lahteine 935592cf6a offsets off by default 2015-03-31 02:50:52 -07:00
Scott Lahteine 2a45922afe Restore extruder_offset, init more simply 2015-03-31 02:49:47 -07:00
Chris Roadfeldt 45ece5afb1 Merge remote-tracking branch 'MarlinFirmware/Development' into Development 2015-03-31 03:07:57 -05:00
Scott Lahteine ba2c7cb467 Update configs with all the latest 2015-03-30 23:24:33 -07:00
Chris Roadfeldt 3175c70c79 Manually synching back up with MarlinFirmware/Development. 2015-03-31 00:11:11 -05:00
Chris Roadfeldt 3be00cce6f Merge remote-tracking branch 'MarlinFirmware/Development' into Development 
Conflicts:
	Marlin/Configuration.h
 2015-03-30 23:59:01 -05:00
Scott Lahteine 5e82ed4f30 Restore ENDSTOPPULLUPS in Configuration.h 2015-03-30 21:15:16 -07:00
Chris Roadfeldt 80285251cc More config cleanup work for Z_PROBE_AND_ENDSTOP. 2015-03-29 03:06:20 -05:00
Chris Roadfeldt fe4549cd83 Config file Z_PROBE_AND_ENDSTOP description clean up. 2015-03-29 03:04:59 -05:00
Chris Roadfeldt 6125124d6c Config file cleanup for Z_PROBE_AND_ENDSTOP support. 2015-03-29 02:29:16 -05:00
Chris Roadfeldt 324c14943b Bug fixes for Z_PROBE_AND_ENDSTOP. 
Code cleanup for Z_PROBE_AND_ENDSTOP.
Added Z_PROBE_PIN to pins_RAMPS_13.h
 2015-03-29 02:16:09 -05:00
Chris Roadfeldt fd823449ad Added serial message for Z Probe trigger. 2015-03-28 05:42:38 -05:00
Chris Roadfeldt 44b88b41a2 Added credit for code. 2015-03-28 05:01:04 -05:00
Chris Roadfeldt 2979b40a7a Fixed typo in Z Probe and Endstop section. 2015-03-28 04:41:03 -05:00
Chris Roadfeldt 9f3ff14008 Enabled separate Z Probe and Z Axis endstop use at same time. 
Typo fixes in comments in existing code.
 2015-03-28 04:31:51 -05:00
Scott Lahteine bc2f249cc6 Merge pull request #1622 from AnHardt/tm-utf-minus-kanji 
The big Language Pack
 2015-03-27 18:24:19 -07:00
Scott Lahteine abfcbd793f Merge pull request #1693 from chris-bo/rework_lcd_beeper 
use only one implementation for beeper feedback
 2015-03-27 17:03:38 -07:00
Scott Lahteine 78090275a9 Fix probe range editing 
- Increase the probe offset range to -20…20
- Apply the range limits to the menu item
 2015-03-26 13:52:48 -07:00
AnHardt 20f909567a Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji 
Conflicts:
	README.md
Solved
 2015-03-26 10:05:00 +01:00
Christian Bohn eab5fad539 code formatting 2015-03-26 09:00:34 +01:00
Scott Lahteine 5eff15c409 Merge branch 'Development' into fixup_leveling 
Latest upstream commits
 2015-03-25 21:24:38 -07:00
Scott Lahteine 5261d35737 Fix custom m-code behavior 
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
 2015-03-25 21:20:50 -07:00
chris-bo 2dfd0e5ce7 Update Configuration.h 
documentation how to disable buzzer feedback
 2015-03-25 12:44:29 +01:00
AnHardt 94330705c7 Move definition of PIDdT back to temperature.h 
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
 2015-03-25 11:51:41 +01:00
AnHardt 9d589cbb2a Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji 
Conflicts:
	Marlin/example_configurations/delta/generic/Configuration.h
	Marlin/example_configurations/delta/kossel_mini/Configuration.h
	Marlin/language.h

Conflicts solved
 2015-03-24 16:59:15 +01:00
Scott Lahteine 4fbb80567e Get upstream commits 2015-03-22 23:07:22 -07:00
Scott Lahteine 7717e1ce33 Fix bad insert in configuration 2015-03-22 21:48:46 -07:00
Scott Lahteine 146501215f Fix mangled probe_pt calls 
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
 2015-03-22 21:45:20 -07:00
Scott Lahteine 15eb5d35a2 Merge branch 'Development' into config_testing 
Latest upstream commits
 2015-03-21 15:42:45 -07:00
Scott Lahteine 2c9bd15625 Move LCD items to Conditionals.h 
- `Conditionals.h` is included twice, setting LCD values the first time
 2015-03-21 15:24:57 -07:00
Edward Patel a7e89d4cfa Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 15:46:01 +01:00
AnHardt e72cb3e45d Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji 
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h

Fix merge conflicts 2
 2015-03-20 13:35:47 +01:00
Scott Lahteine 63d5d28085 Merge branch 'Development' into config_testing 
Latest upstream changes
 2015-03-20 04:15:18 -07:00
Scott Lahteine b6d381f863 Divide up Conditionals to get LCD items early 2015-03-20 02:50:28 -07:00
Scott Lahteine 670006b919 Remove invariant code from Configurations 
- Add `Conditionals.h` with calculated configuration values
- Add `SanityCheck.h` with checks for configuration errors
- Remove equivalent code from all configurations
- Move error checks from some sources to `SanityCheck.h` also
- Fix initialization of count_direction in stepper.cpp
 2015-03-19 22:22:23 -07:00
AnHardt 47c1ea72af Merge https://github.com/kieranc/Marlin into PIDdebug 
Conflicts:
	Marlin/temperature.cpp

Cleaned merge conflict.

Codeposition had changed.
Variable pid_input had vanished.

Signed-off-by: AnHardt <github@kitelab.de>
 2015-03-20 00:07:36 +01:00
AnHardt e917477fec Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji 
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/fonts/make_fonts.bat

Claerd conflicts with my own #1621. (His was easy. :-) )

corrected typo in fonts/README.fonts

Applied changes to the new delta-configurations
 and deletet there some extra whitespace at the line-endings.
 2015-03-19 12:35:43 +01:00
Edward Patel 8067a985ce Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 
Fixed conflicts:
	Marlin/planner.h
 2015-03-17 22:48:08 +01:00
AnHardt 1883e1bb60 Applied thinkyheads corrections from 2015-03-17 2015-03-17 11:23:44 +01:00
AnHardt 00b162a993 Merge remote-tracking branch 'origin/utf-kanji' into tm-utf-minus-kanji 
Conflicts:
	Marlin/language.h
Conflict cleaned
 2015-03-16 17:13:49 +01:00
maverikou 8a739b6fba Merge branch 'Development' into delta_auto_bed_level 
Conflicts:
	Marlin/Marlin_main.cpp
 2015-03-16 08:24:26 +02:00
Edward Patel e983a5ab92 Disable option. Enable for use/test. 2015-03-16 02:50:11 +01:00
Edward Patel f34b9c83d1 Added comment about MESH_NUM axis points. 2015-03-16 01:48:46 +01:00
Scott Lahteine a686c9878f Move TOPO_ORIGIN define to Configuration.h 
- Addressing issue #1608
 2015-03-15 15:49:36 -07:00
Edward Patel 8005d22c81 Added menu option for bed leveling. 2015-03-15 23:24:32 +01:00
Edward Patel 0e51e53813 WIP. Adding bed leveling code. 2015-03-15 23:24:32 +01:00
AnHardt 2f374f1465 Removed Kanji. 2015-03-15 16:44:37 +01:00
Scott Lahteine 4b50205f11 Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-03-15 06:37:32 -07:00
AnHardt 96f8d20f2f Change selection logic another time 
Automatic selection was to unflexible.

Updated documentation

Updated language files to new logic and documentation.

Updated bdf2u8g.exe
 2015-03-13 14:26:58 +01:00
Scott Lahteine 08694339eb Merge branch 'Development' into marlin_configurator 
Conflicts:
	Marlin/Configuration.h
 2015-03-11 15:47:32 -07:00
Mehmet Sutas b373826428 Merge pull request #2 from MarlinFirmware/Development 
update
 2015-03-12 00:07:39 +02:00
AnHardt 5bafb1fe1f Add user test to language_test.h and make it default. 
Improve description in Configuration.h
 2015-03-11 20:46:52 +01:00
alexborro 9157cbd8f3 Add Travel Acceleration and change the M204 options 
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).

It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves

I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
 2015-03-11 13:19:02 -03:00