Jamie
36d08f8ad3
Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs ( #16510 )
2020-01-09 04:48:00 -06:00
Scott Lahteine
95046c9047
Extend SERIAL_CHAR to take multiple arguments
2020-01-08 18:36:47 -06:00
Jamie
022b6b9067
Fix M115 cap with EXTRUDERS == 0 ( #16459 )
2020-01-05 01:54:30 -06:00
George Fu
e593da1c23
Update and fix DGUS ( #16317 )
2020-01-03 21:00:44 -06:00
Jason Smith
3cade6245e
Fix MIN_PROBE_EDGE bug in default ABL G29 ( #16367 )
2020-01-03 17:46:26 -06:00
Dirk O. Kaar
d0e1166cce
Fix Visual Micro "Arduino IDE for Visual Studio" support ( #16418 )
2020-01-02 19:01:38 -06:00
InsanityAutomation
1c9ccce520
Add NOZZLE_AS_PROBE (no probe offsets) ( #15929 )
2019-12-24 00:03:08 -06:00
randellhodges
0b6c2d893e
Fix G34 with Z_DUAL_STEPPER_DRIVERS compile ( #16274 )
2019-12-20 22:03:37 -06:00
Scott Lahteine
deff538909
Fix broken M100_dump_routine
2019-12-19 21:02:14 -06:00
Scott Lahteine
b49a0e39d5
HOME_USING_SPREADCYCLE is obsolete
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 16:02:57 -06:00
Scott Lahteine
865071a946
Tweak code formatting
2019-12-19 02:16:17 -06:00
Moshi Binyamini
dcdaa2025f
Sanity-check Z_STEPPER_AUTO_ALIGN coordinates ( #16231 )
2019-12-19 00:59:01 -06:00
Scott Lahteine
0400783444
Tweak G34, fix a declaration
2019-12-19 00:42:39 -06:00
danym21
6e8dcba698
Fix G28 debug line, M569 calls ( #16213 )
2019-12-15 12:00:00 -06:00
Luu Lac
e9dadacf7b
Fix bad #ifdef ( #16227 )
2019-12-15 11:16:36 -06:00
Scott Lahteine
f3d64b7115
Cardreader read/write open methods
2019-12-12 18:46:49 -06:00
Scott Lahteine
83a4e8559c
Followup to "optimize common strings"
2019-11-30 08:18:23 -06:00
Felicia Hummel
690ed531b6
Configurable PSU power-on delay ( #16050 )
2019-11-30 07:17:24 -06:00
Scott Lahteine
1ee648ecd2
Followup to "optimize common strings"
2019-11-30 06:55:32 -06:00
Scott Lahteine
f83bc0aa13
Optimize common strings
...
Saves 128 bytes in testing with `mftest mega 1 -y`
2019-11-29 22:54:42 -06:00
BigTreeTech
441ee3e53f
Add 'M114 E' to get E position (M114_DETAIL) ( #16026 )
2019-11-29 06:53:32 -06:00
Jason Smith
752a1e76ab
Float ABL mesh boundaries, no probe position rounding ( #16018 )
2019-11-27 01:29:25 -06:00
Scott Lahteine
98f83dc756
Add comments to G29
2019-11-27 01:05:22 -06:00
haschtl
ff6518c0a8
Add PID_FAN_SCALING option ( #15585 )
2019-11-26 03:34:43 -06:00
lukasmatena
8ccfdaca02
Add M220 B/R with PRUSA_MMU2 ( #15739 )
2019-11-26 03:34:18 -06:00
Scott Lahteine
1d150e41b6
Reduce MMU2 code, add test
2019-11-26 02:15:31 -06:00
InsanityAutomation
2142beb2e5
Fix UI compile error in UBL ( #15981 )
2019-11-24 17:04:19 -06:00
Scott Lahteine
b11551c767
Touch UI updates for Cocoa Press ( #15986 )
2019-11-24 06:08:05 -06:00
Denis Semenov
0fcd1f4a49
Fix HAS_CLASSIC_E_JERK and related issues ( #15968 )
2019-11-23 15:56:07 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Jason Smith
4ede13e36a
Fix G29 for updated meshCount type ( #15960 )
2019-11-21 03:19:56 -06:00
BigTreeTech
ab8b24fdba
Power Loss Recovery with a UPS ( #15943 )
2019-11-20 17:40:21 -06:00
Scott Lahteine
ab9f0f2c4f
Followup to meshCount patch
2019-11-20 04:57:04 -06:00
InsanityAutomation
798f34abcd
Float XY probe offset followup (probe edge) ( #15928 )
2019-11-19 23:29:52 -06:00
Evgeny-SPB
7116a8645c
G34 logic / typo fix ( #15938 )
2019-11-19 23:25:07 -06:00
InsanityAutomation
4d4e692c81
Match onMeshUpdate() index sign ( #15920 )
2019-11-19 23:16:43 -06:00
Roxy-3D
f19fa64e98
Eliminate multiple settings to extruder_duplication_enabled in G28
...
If the IDEX mode was previously set (via GCode or the LCD Panel) to a duplication mode... It was lost after a G28 due to this redundant setting of 'extruder_duplication_enabled'.
It is very important to the various use cases of IDEX machines that extruder_duplication_enabled is preserved across a G28. The reason is this allows a person to use the LCD Panel to put the machine into a duplication mode, and then send a 'normal' part file to the printer and get two parts out of the process.
2019-11-15 15:42:01 -06:00
Scott Lahteine
602ca5dea6
No USE_M73_REMAINING_TIME without LCD_SET_PROGRESS_MANUALLY
2019-11-13 02:07:17 -06:00
Roman Moravčík
e110f5abce
M73 R : Set Remaining Time ( #15549 )
2019-11-12 19:36:54 -06:00
danym21
28e1614c2e
Add Sensorless Homing current ( #15690 )
2019-11-10 18:45:06 -06:00
Jason Smith
770adcfa15
Raise Z before homing X/Y on unknown Z ( #15859 )
2019-11-10 16:21:20 -06:00
ellensp
7b29c60c46
Fix compile with chamber enabled ( #15862 )
2019-11-10 16:15:08 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro ( #15829 )
2019-11-09 17:59:04 -06:00
Scott Lahteine
ca6d00b862
Save some string flash
2019-11-02 00:48:05 -05:00
Scott Lahteine
ad28da7eb4
Patch ABL G29 loop
...
Followup to e3ddf6e81a
2019-11-01 15:39:05 -05:00
Scott Lahteine
e7d9db284e
Followup to M240 patch
2019-10-31 17:27:19 -05:00
Raúl Lázaro Sánchez
7c60853219
Fix blocking delay in Photo G-code M240 ( #15728 )
2019-10-31 17:14:11 -05:00
Scott Lahteine
4e6e02bc3e
Include pause.h for M701-702
2019-10-31 13:18:50 -05:00
Scott Lahteine
e3ddf6e81a
Fix meshCount signed-ness
2019-10-31 13:18:50 -05:00
Scott Lahteine
c80eda073f
M119 => report_states
2019-10-30 15:24:10 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print ( #15703 )
2019-10-27 17:49:27 -05:00
Scott Lahteine
ab0fe1a7dd
Tweak G29 faux point
2019-10-26 14:41:54 -05:00
Scott Lahteine
732bf89878
Get 'cancelable' for gcode.cpp
2019-10-25 19:38:23 -05:00
Scott Lahteine
014b739bac
Fix M486 int parameters
2019-10-25 19:19:33 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 ( #15590 )
2019-10-24 15:35:40 -05:00
InsanityAutomation
82fb046013
Allow suicide pin inverting ( #15586 )
2019-10-24 14:07:28 -05:00
Jacob Jordan
9895e6d766
Only use slow homing speed where applicable ( #15640 )
2019-10-24 13:14:45 -05:00
Robby Candra
cf8541a7a7
Fix G92.9 (thus PLR Z position) ( #15625 )
2019-10-24 13:05:50 -05:00
Scott Lahteine
cd3ec5a77b
Add error-check to M422
2019-10-24 12:59:50 -05:00
milkpirate
6bcd4eb12d
Fix M420 (UBL) undefined variables ( #15621 )
2019-10-24 12:07:17 -05:00
Scott Lahteine
af214ff121
Fix up PSU_CONTROL checks
2019-10-22 16:16:12 -05:00
Scott Lahteine
160c8be191
Fix BABYSTEP_DISPLAY_TOTAL output
2019-10-21 13:53:19 -05:00
Scott Lahteine
0652f19673
Fix M420 for moved probe methods
2019-10-16 15:56:34 -05:00
Scott Lahteine
bb381e22b2
Fix left-shift warning
2019-10-16 15:42:46 -05:00
Bo Herrmannsen
0d7736d663
Enable M191 ( #15531 )
2019-10-16 15:02:37 -05:00
Jason Smith
832cb7e1ac
Z_STEPPER_AUTO_ALIGN — To align with Z stepper points ( #15195 )
2019-10-16 13:39:58 -05:00
Scott Lahteine
b7b303f4bf
Spindle/Laser power in planner blocks ( #14437 )
2019-10-15 16:10:20 -05:00
Scott Lahteine
faacfe13c2
Tweak M105 layout
2019-10-15 13:35:13 -05:00
Antti Andreimann
d47f29bd4c
Give a dummy response to M105 with zero thermistors ( #15568 )
2019-10-15 13:30:52 -05:00
Robby Candra
e79666a82b
Followup to "Fix G2/G3 rounding" ( #15510 )
2019-10-10 21:16:37 -05:00
LinFor
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
Ed Williams
d8aeeb8ff6
Fix G2/G3 rounding error ( #15507 )
2019-10-10 19:50:08 -05:00
Marcio Teixeira
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
Scott Lahteine
e84389c976
Fix G2/G3 workspace plane parameters ( #15475 )
2019-10-07 17:09:20 -05:00
LinFor
19b7be067c
Allow M73 to override SD position ( #15449 )
2019-10-07 16:38:58 -05:00
Scott Lahteine
56595a4c9c
Improve G2/G3 precision
...
See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253
2019-10-07 00:03:17 -05:00
Scott Lahteine
519cc1bc67
NUM_AXIS is now obsolete
2019-10-06 22:18:16 -05:00
Scott Lahteine
0322348924
Handle runout in runout.cpp
2019-10-03 06:27:30 -05:00
Oliver Jean Eifler
d52b908627
Fix coordinate size for G26 w/out arcs ( #15443 )
2019-10-01 20:02:27 -05:00
InsanityAutomation
438835f6a5
Configurable Max Accel, Max Feedrate, Max Jerk edit limits ( #13929 )
2019-10-01 19:59:48 -05:00
Scott Lahteine
e3fd0519b3
Reduce need for UNUSED
2019-09-30 22:56:22 -05:00
Scott Lahteine
139b7196a0
Watchdog cleanup ( #15283 )
2019-09-29 17:57:29 -05:00
Scott Lahteine
f307ff68f7
Multiply by float, not double
2019-09-29 17:25:27 -05:00
Alex Somesan
10bbed7f69
Fix comma/semicolon typo ( #15420 )
2019-09-29 16:50:53 -05:00
Scott Lahteine
50e4545255
Add custom types for position ( #15204 )
2019-09-29 04:25:39 -05:00
Scott Lahteine
7c5e6900e1
Tweak comment
2019-09-28 22:08:02 -05:00
InsanityAutomation
0ca6abce72
Add reporting to M290 ( #15376 )
2019-09-28 16:58:48 -05:00
InsanityAutomation
a6b0223eea
Revive and improve DELTA probe bounds, LRFB options ( #15372 )
2019-09-28 01:19:11 -05:00
InsanityAutomation
5221e2d991
Restore Host Prompt Info ( #15387 )
2019-09-27 17:06:26 -05:00
Scott Lahteine
d683f98019
Return buffer in duration.toString
2019-09-27 04:45:01 -05:00
Marcio Teixeira
a18d16fb8b
Do not implicitly concatenate localized strings ( #15383 )
2019-09-27 04:38:43 -05:00
Scott Lahteine
665e45e0ba
Reduce string storage, use masking 'seen'
2019-09-26 04:30:55 -05:00
Scott Lahteine
455dabb183
Add a feedRate_t data type ( #15349 )
2019-09-26 01:28:09 -05:00
Scott Lahteine
b2e1f77f58
Fix extraneous "Home XYZ First" message
2019-09-25 21:57:20 -05:00
Scott Lahteine
25c4c2f24e
Fix bool in M851
2019-09-25 08:39:11 -05:00
Scott Lahteine
da1bda493e
Apply Marlin conventions to M851
2019-09-25 03:57:16 -05:00
InsanityAutomation
e9cf46a9a5
M851 XY 3 point followup (incomplete) ( #15361 )
2019-09-25 02:43:41 -05:00
Robby Candra
9c288a682d
Followup to probe_at_point change ( #15342 )
2019-09-25 02:29:10 -05:00
Scott Lahteine
5288c399ce
Patch probe offset name, defines
2019-09-24 23:39:23 -05:00
Scott Lahteine
4e8d9fe59b
zprobe_offset => probe_offset
2019-09-24 23:36:09 -05:00
InsanityAutomation
df1e51258a
Add M851 X Y probe offsets ( #15202 )
2019-09-24 21:29:21 -05:00
Scott Lahteine
5e13fe989f
Rename some feedrate-oriented functions
2019-09-23 22:36:41 -05:00
Scott Lahteine
13d725d24d
Tweak debug messages
2019-09-20 23:35:22 -05:00
Scott Lahteine
1a1375964f
Drop unused G26 function
2019-09-18 04:07:14 -05:00
Scott Lahteine
b71a755a30
Add float suffix in G33
2019-09-17 23:30:27 -05:00
Scott Lahteine
c353eaa146
Misc changes from struct refactor ( #15289 )
2019-09-17 18:16:28 -05:00
Bas Stottelaar
847e4ced11
Fix M43 without watchdog ( #15280 )
2019-09-16 16:09:43 -05:00
Scott Lahteine
d5f5203880
Use "mount" as card verb
2019-09-15 03:12:44 -05:00
Scott Lahteine
465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor ( #15256 )
2019-09-14 03:05:10 -05:00
Scott Lahteine
f9992c5f33
Implausible
2019-09-11 02:52:14 -05:00
Scott Lahteine
6091e6300a
Fix G90, G91, M82, M83 rel/abs modes ( #15218 )
2019-09-11 01:29:33 -05:00
Scott Lahteine
c590e8ac05
Improve Power-loss Recovery ( #15135 )
2019-09-10 18:52:41 -05:00
Scott Lahteine
75927e17dd
Filament Width Sensor singleton ( #15191 )
2019-09-10 18:48:58 -05:00
Scott Lahteine
584c86bed1
More "zero extruders" changes ( #15213 )
2019-09-10 02:20:49 -05:00
Scott Lahteine
841c8ce0d9
Remove PROMPT_INFO / PROMPT_GCODE_INFO ( #15210 )
2019-09-09 15:43:06 -05:00
InsanityAutomation
0693767efa
ExtUI Pause/Stop on all Pause/Stop ( #15188 )
2019-09-08 01:47:07 -05:00
Lucio Tarantino
8ac52aedff
M118 multiserial support ( #15176 )
2019-09-08 00:57:59 -05:00
Jamie
dbee0e9c54
Analog joystick jogging control ( #14648 )
2019-09-08 00:55:34 -05:00
Ludy
068c303742
More translatable LCD strings ( #15190 )
2019-09-08 00:15:25 -05:00
Scott Lahteine
7496e1cd67
whitespace
2019-09-04 21:55:41 -05:00
Jamie
293b890940
Apply soft limits to G2/G3 final target ( #15156 )
2019-09-04 13:02:30 -05:00
Giuliano Zaro
9958f5e322
Home on G34 if steppers slept ( #15127 )
2019-09-02 02:44:48 -05:00
Scott Lahteine
a2e412c0ce
Rename command buffer var
2019-09-01 20:43:31 -05:00
Scott Lahteine
586b334c2a
Split up stepper indirection ( #15111 )
2019-08-31 19:44:45 -05:00
Luu Lac
081e4506ca
Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS ( #15069 )
2019-08-28 04:20:28 -05:00
InsanityAutomation
b7796bcce6
Disable steppers on M112 ( #15065 )
...
And change verbiage to not refer to "Emergency Stop."
2019-08-28 00:51:01 -05:00
InsanityAutomation
f218405c36
Fix ExtUI invalid speed, timer ( #15031 )
2019-08-25 04:46:02 -05:00
Scott Lahteine
dd6efe96e7
Restore documented M503 behavior
2019-08-22 18:58:11 -05:00
InsanityAutomation
af5a7a2925
Add missing ExtUI user confirmation ( #14992 )
2019-08-18 21:03:26 -05:00
Marcio Teixeira
274934ad81
Add LULZBOT_TOUCH_UI ( #14967 )
2019-08-16 18:34:13 -05:00
Marcio Teixeira
179d6c4ed1
Add STARTUP_SCRIPT option. M17 parity with M18. ( #14953 )
2019-08-14 21:05:15 -05:00
Joseph Bozarth
0fbb26c28f
M16 - Expected Printer Check ( #14924 )
2019-08-13 23:38:45 -05:00
Scott Lahteine
c8e30b6639
Fix code attempting to sprintf %f ( #14869 )
...
Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.
2019-08-08 01:51:37 -05:00
Chris Pepper
f499cecf0d
Marlin Binary Protocol Mark II ( #14817 )
2019-08-05 20:41:53 -05:00
Acenotass
4af9908764
Update M48 command in the status line ( #14816 )
2019-08-05 20:01:40 -05:00
teemuatlut
d4974ea719
TMC SPI Endstops and Improved Sensorless Homing ( #14044 )
2019-08-04 22:22:58 -05:00
InsanityAutomation
f59a7e8b07
Print/display ABL current probe point ( #14788 )
2019-08-01 20:11:26 -05:00
InsanityAutomation
6f8b8c394d
Homing backoff per-axis / delta Z ( #14789 )
2019-07-31 20:50:23 -05:00
Scott Lahteine
c2b319360d
Remove extra pragmas
2019-07-30 20:19:47 -05:00
Acenotass
659d06d9b9
M48 menu item, result to status ( #14772 )
2019-07-30 02:31:14 -05:00
rafaljot
e44fccf3d2
Add support for M575 ( #14757 )
2019-07-30 02:30:00 -05:00
Scott Lahteine
eae543adf3
Apply HAS_SPI_LCD as needed
2019-07-29 18:55:05 -05:00
Giuliano Zaro
290466578f
Adafruit Grand Central M4 ( #14749 )
2019-07-28 14:48:29 -05:00
Scott Lahteine
17abb94532
Whitespace patch
2019-07-28 01:29:23 -05:00
Ludy
97e9c95f47
Fix & clean up ExtUI ( #14748 )
2019-07-27 22:44:05 -05:00
Scott Lahteine
a3dc1e461b
Update M7219 comment, tweak parameter code
2019-07-24 21:09:51 -05:00
Scott Lahteine
1088846cae
Cosmetic updates from 14044
2019-07-24 01:52:36 -05:00
InsanityAutomation
dc6fa04f68
Fix single nozzle temp change, do slower extra prime ( #14696 )
2019-07-21 19:33:37 -05:00
Tim Moore
e5aa453293
Add support for 2 Neopixel strips ( #14667 )
2019-07-20 23:14:09 -05:00
Jason Smith
f2c5740d06
Add 'E' argument to G34 to allow stowing between probes ( #14533 )
...
- Use the return value from probe_pt during `G34`
Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument.
- Add '`E`' argument to `G34` command allowing stowing between each probe.
2019-07-17 04:23:19 -05:00
InsanityAutomation
b8cc61262f
Finish G12, update Nozzle::clean ( #14642 )
2019-07-17 04:23:19 -05:00
Marcio Teixeira
27c487bab7
Print progress enhancements ( #14647 )
2019-07-17 03:14:44 -05:00
Scott Lahteine
eaf1c0954e
Update some precompiler tests
2019-07-14 13:09:16 -05:00
InsanityAutomation
ce02c6cee2
Variable tool change purge ( #14618 )
2019-07-14 11:40:58 -05:00
Marcio Teixeira
cbe4bf2ba8
Fix process_injected_command undefined behavior ( #14602 )
2019-07-14 10:12:48 -05:00
InsanityAutomation
d2f20803ba
Allow nozzle clean with limited Axis ( #14619 )
2019-07-14 06:58:53 -05:00
Robby Candra
e96468566d
Fix Z_PROBE_END_SCRIPT in ABL ( #14621 )
2019-07-14 04:28:38 -05:00
scotthsl
19b24a349c
Fix M412 without HOST_ACTION_COMMANDS ( #14591 )
2019-07-12 04:23:33 -05:00
Scott Lahteine
ed0e6afacb
Apply LIMIT macro
2019-07-10 03:35:39 -05:00
Bob Kuhn
dc02d0720d
Pins Debugging for STM32 — NEEDS TESTING ( #14309 )
2019-07-05 22:08:06 -05:00
Scott Lahteine
fe02241044
NONE on combined options
2019-07-05 18:20:24 -05:00
Scott Lahteine
750a16ad38
Fix MIN/MAX function collision with macros
2019-07-05 18:14:02 -05:00
Scott Lahteine
b6546ea33a
Add include guards to some headers
2019-07-05 04:02:08 -05:00
Tim Moore
eb6dec03bd
Simplify power supply naming logic ( #14488 )
...
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 01:58:34 -05:00
Scott Lahteine
720bc7c00b
Named indices for Temperature class ( #14479 )
2019-07-02 08:39:55 -05:00
GMagician
82ecaa767e
Remove unused code in M100
...
queue.buffer is in bss area, start_free_memory starts from heap then above of bss
2019-07-01 20:38:49 -05:00
Scott Lahteine
d16954dc88
Make KEEPALIVE_STATE a scoped auto-restore ( #14446 )
2019-06-29 22:49:50 -05:00
Marcio Teixeira
e6cf7860e8
Improve ExtUI, fix compiler errors, warnings ( #14441 )
2019-06-29 00:23:57 -05:00
Darsey Litzenberger
946f6bdeaa
Disable leveling during G12 ( #14385 )
2019-06-28 19:23:42 -05:00
Scott Lahteine
4d5a1984e2
Simplified fan handling code
2019-06-28 18:50:32 -05:00
Scott Lahteine
93cd66ac11
Tweaky change from (C) to (c)
2019-06-27 23:58:16 -05:00
Scott Lahteine
d7d80418ae
Singleton for cutting tools ( #14429 )
2019-06-27 23:06:49 -05:00
Tim Moore
81209f5310
'M105 R' to report redundant temp sensor ( #14324 )
2019-06-27 21:29:52 -05:00
InsanityAutomation
ce656e2a26
Update G-code injection, sub-commands ( #14418 )
2019-06-27 15:07:45 -05:00
Scott Lahteine
2580104c8b
Revert recent probe changes
...
- Revert "Fix FIX_MOUNTED_PROBE compile error (#14393 )"
- Revert "Fix G28 with non-BLTouch probes (#14381 )"
- Revert "Fix BLTOUCH deploy/stow in HS mode (#14352 )"
- Revert "Apply needed BLTouch patch (#14233 )"
Co-Authored-By: AnHardt <github@kitelab.de>
2019-06-26 05:33:43 -05:00
BigIronGuru
9f136a7c67
Low-priority homing in G34 ( #14391 )
2019-06-26 03:52:01 -05:00
Scott Lahteine
49627069a5
Shorthand for home-after-deactivate
2019-06-26 03:47:55 -05:00
Marcio Teixeira
8e23e9b16c
Fix FIX_MOUNTED_PROBE compile error ( #14393 )
2019-06-25 04:55:29 -05:00
Scott Lahteine
cf762d2c73
Fix enqueueing bug
2019-06-23 23:02:07 -05:00
BigIronGuru
12d21e642f
Update G34 for non-BLTouch probes ( #14380 )
2019-06-23 20:55:43 -05:00
BigIronGuru
5986194c36
Fix G28 with non-BLTouch probes ( #14381 )
2019-06-23 20:53:05 -05:00
InsanityAutomation
aa0383a83b
Enhance IDEX toolchange auto-return w/ no park, full control ( #14117 )
2019-06-23 20:00:48 -05:00
Scott Lahteine
17778d1c2a
Fix M916-918 subcommands
2019-06-22 16:18:42 -05:00
Tanguy Pruvot
be69ec5b32
Fix PLR/M43 warnings ( #14333 )
2019-06-22 00:48:47 -05:00
BigIronGuru
9c83135d40
Only home Z at the end of G34 ( #14353 )
2019-06-22 00:43:33 -05:00
LinFor
0f6f5132c1
Fix variable conflict in ok_to_send ( #14351 )
2019-06-21 19:04:30 -05:00
InsanityAutomation
a9acd2f497
G34 configurable angle limit ( #14321 )
2019-06-20 21:18:36 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support ( #14249 )
2019-06-20 15:47:50 -05:00
Scott Lahteine
4c872a01f2
G-code queue singleton, front injection ( #14236 )
2019-06-19 00:00:19 -05:00
InsanityAutomation
bf64dd4db6
Improve G34, M422 (Z alignment) ( #14142 )
2019-06-18 07:02:18 -05:00
Scott Lahteine
3f6424076b
Update M524 description
2019-06-18 05:04:55 -05:00
Scott Lahteine
cf3631226b
Document G-code M290
2019-06-18 04:53:31 -05:00
Scott Lahteine
903863dcb6
Suppress some warnings
2019-06-15 17:47:59 -05:00
mb300sd
bf8bfb5c66
Add Coolant Control M7/M8/M9 ( #10745 )
2019-06-13 18:43:11 -05:00
Scott Lahteine
bc2ff9b41f
Fix M605 bugs
...
Fixes #14191
2019-06-12 20:01:08 -05:00
Scott Lahteine
04715e04ee
Minor M100 cleanup
2019-06-12 06:14:40 -05:00
Scott Lahteine
356410dcfc
Move crc16 function to libs
2019-06-12 06:14:39 -05:00
Scott Lahteine
1ef95013f0
Update Marlin.cpp includes, defines
2019-06-11 07:30:51 -05:00
Tanguy Pruvot
8cf5504a34
Redundant but faster recovery.enabled test ( #14175 )
2019-06-10 23:33:35 -05:00
Scott Lahteine
0ca2073625
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT
2019-06-10 17:28:35 -05:00
Robby Candra
5ca8d51e12
Ability to insert G-code in front of queue ( #14229 )
2019-06-08 05:23:53 -05:00
Ludy
8e8e48f900
Fix links in templates, gcode.h ( #14160 )
2019-05-28 21:39:55 -05:00
Minims
32afe1d102
Fix TOOLCHANGE_ZRAISE warning ( #14156 )
2019-05-27 19:51:29 -05:00
Scott Lahteine
3c179bbd47
Simpler G28 home axis conditions
2019-05-26 16:26:55 -05:00
Scott Lahteine
352734494b
Reduce some M43 strings
2019-05-26 16:21:28 -05:00
Scott Lahteine
b14cc0d7c5
Remove extra gcode. prefix
2019-05-26 16:18:45 -05:00
Scott Lahteine
c6d39319de
Fix some whitespace
2019-05-26 16:18:43 -05:00
InsanityAutomation
212860f090
Always change to Tool 0 on G29 ( #14146 )
2019-05-26 14:53:21 -05:00
Bryan
0ef5d667b6
Fixed M43 parameter bug ( #14099 )
2019-05-25 18:23:25 -05:00
teemuatlut
1c86fbc60b
TMC updates, capture LCD changes ( #14074 )
2019-05-25 18:22:12 -05:00
Scott Lahteine
fc52c43a26
Some documentation updates
2019-05-24 16:30:44 -05:00
Tanguy Pruvot
24b1818245
Secure STM32F1 servo code and M280 detach ( #14085 )
2019-05-22 16:57:19 -05:00
Scott Lahteine
aeec9ef76b
Update backlash code
2019-05-20 21:34:08 -05:00
Tanguy Pruvot
87e7193259
Fix M226 sign warning (for most platforms) ( #14049 )
2019-05-18 16:15:48 -05:00
FanDjango
85fb33a060
BLTOUCH tweaks, new v3.1 command ( #14015 )
2019-05-17 19:10:18 -05:00
Scott Lahteine
785c01f2bc
Use US spelling of 'behavior'
2019-05-15 01:49:17 -05:00
Sam Lane
7f1e0c5670
Update EXTRA_LINADV_K with Marlin bit macros ( #13993 )
2019-05-15 01:07:07 -05:00
Robby Candra
7b78a20fb7
Fix: Debug Memory Dump size ( #13957 )
...
* Fix Memory Dump size
* Fix Compile error on Memory Dump
2019-05-11 11:44:39 -05:00
Giuliano Zaro
f22c9a1ae1
Fix G-code parser with MMU2 ( #13951 )
2019-05-10 19:57:15 -05:00
Bob Kuhn
fa3739aa23
M100: LPC1768 and DUE compatibility ( #13962 )
2019-05-09 21:57:44 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' ( #13944 )
2019-05-09 11:45:55 -05:00
InsanityAutomation
6811e2921b
BLTouch v3 / 3DTouch Interoperability & performance ( #13814 )
2019-05-07 21:25:54 -05:00
Ludy
a504366138
Fix probe fan compiling error ( #13930 )
2019-05-07 14:14:12 -05:00
Stephan
483822f3aa
Fix some THERMAL_PROTECTION_CHAMBER issues ( #13678 )
2019-05-06 19:55:01 -05:00
doggyfan
23a8707ef1
Configurable Thermistor ( #13888 )
2019-05-06 18:51:06 -05:00
Ludy
f96eaad1ea
Unused variable cleanup ( #13917 )
2019-05-05 22:01:04 -05:00
Giuliano Zaro
e2a77ed881
Bring chamber temp to completion ( #13837 )
2019-05-04 22:51:47 -05:00
Marcio Teixeira
15357af67c
Backlash cleanup ( #13659 )
...
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
2019-05-03 23:53:15 -05:00
Robby Candra
c369477cb0
Fix bug: diveToFile breaks M23 ( #13865 )
2019-05-02 15:54:24 -05:00
Thomas Moore
ee243e4edf
Fix mixing extruder filament change ( #13803 )
2019-05-01 21:55:58 -05:00
InsanityAutomation
610fb46683
Fix some ExtUI issues ( #13799 )
2019-04-26 09:32:01 +02:00
Bob-the-Kuhn
73726d56b3
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-25 12:06:01 -05:00
Scott Lahteine
5051909c3c
Update do_select_screen for general use ( #13800 )
2019-04-24 10:13:44 -05:00
Giuliano Zaro
e2dd2268e8
Add a Z raise-between-probes to G34 ( #13791 )
2019-04-23 13:40:55 -05:00
Scott Lahteine
0c4d3e6622
Improve M906 description
2019-04-22 13:48:02 -05:00
Bob-the-Kuhn
520585c5ed
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-17 15:34:29 -05:00
Scott Lahteine
92ed9a2bb6
Fix is_M29
...
Followup for #13013
2019-04-15 23:47:06 -05:00
Scott Lahteine
9992c424f5
Patch G92.9 flags
...
Followup to #13703
2019-04-15 20:26:40 -05:00
Msq001
455ee23499
Fix, improve Power Loss Recovery ( #13703 )
...
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
2019-04-15 18:53:39 -05:00
InsanityAutomation
aa0f7afbe6
Fix call to uninitialized PWM pin, heater 2 overlap ( #13674 )
2019-04-15 15:57:34 -05:00
Bob-the-Kuhn
9dd4252b39
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-12 22:07:12 -05:00
Scott Lahteine
7e58d33a2e
Update some headers
2019-04-12 13:04:04 -05:00
Jamie
509dc283f2
Restore declarations of G53-G59 ( #13654 )
2019-04-11 13:51:05 -05:00
InsanityAutomation
4900c28bf6
Fix IDEX tool-change, and more ( #13614 )
2019-04-09 18:33:40 -05:00
Scott Lahteine
5e38d70697
Fix M217 report label, general cleanup
2019-04-08 18:18:08 -05:00
Scott Lahteine
fae2b7edc3
Update MMU2 code style
2019-04-08 18:13:42 -05:00
Scott Lahteine
c8a83fb122
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA
2019-04-08 18:13:41 -05:00
Bob Kuhn
9a56d90150
Fix M43 on LPC176x ( #13587 )
...
The real fix. PR #13568 was wrong.
2019-04-06 18:06:07 -05:00
Roxy-3D
9cee81d47e
Option to show babysteps total since G28 ( #13580 )
2019-04-06 18:04:34 -05:00
Scott Lahteine
cf12fc8366
Expand on serial debugging ( #13577 )
2019-04-05 20:02:46 -05:00
Marcio Teixeira
bf7b28b456
Fix incorrect variable name ( #13585 )
2019-04-05 19:04:46 -05:00
Scott Lahteine
cacec5764a
Clean up whitespace
2019-04-04 22:12:02 -05:00
Marcio Teixeira
27a4927ed1
Add option to move away from endstop after homing. ( #13557 )
...
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
2019-04-04 02:47:19 -05:00
Scott Lahteine
af92ee9dd6
No PLR include needed in queue.cpp
2019-04-03 18:26:31 -05:00
Scott Lahteine
2aa35e95af
More G26 arc cleanup
...
Followup to #13531
2019-04-03 16:03:21 -05:00
Scott Lahteine
a0a5c31c05
Power-Loss initialization fix ( #13553 )
...
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
2019-04-01 17:52:45 -05:00
InsanityAutomation
fbc7b51a24
Use NO_FETCH for Dual X G28 ( #13539 )
2019-04-01 17:48:21 -05:00
InsanityAutomation
4961d8aa3e
Update G28.cpp ( #13539 )
2019-03-31 19:50:40 -05:00
ManuelMcLure
04086fc455
Minor optimization to ARC_SUPPORT code ( #13531 )
2019-03-30 22:29:37 -05:00
Robby Candra
a3f67acd6d
Fix Power Loss Recovery file delete ( #13522 )
2019-03-30 13:14:58 -05:00
Marcio Teixeira
5679fae11e
UltraLCD enhancements (lower fan resolution, backlash menu) ( #13519 )
2019-03-29 14:07:43 -05:00
Marcio Teixeira
c6466c23fe
Silence signed/unsigned comparison warning. ( #13508 )
2019-03-29 13:33:45 -05:00
InsanityAutomation
7240e3a68f
Allow G26 with no heated bed ( #13511 )
2019-03-29 13:32:43 -05:00
Sam Lane
e3ab54753b
Add extra Linear Advance factors ( #13490 )
2019-03-26 04:02:27 -05:00
Thomas Moore
263f8edff8
Disable volumetric extrusion during G26 ( #13479 )
2019-03-25 22:41:52 -05:00
Chris Pepper
aacc1148b0
Fix M106 for index > extruders ( #13473 )
2019-03-24 20:03:53 -05:00
7eggert
d96f7d6068
Minimum segments for G2/G3. Better for small arcs. ( #13466 )
2019-03-24 19:53:47 -05:00
Sam Lane
a8fa275dc6
Fix Fan 0 responding to all fan speeds ( #13444 )
2019-03-23 23:00:31 -05:00
InsanityAutomation
5b2c37d6c1
Followup to BLTouch ( #13422 )
2019-03-18 16:31:11 -05:00
InsanityAutomation
3fb8489ae3
EXTUI and UBL compilation fixes ( #13420 )
2019-03-17 07:57:54 -05:00
Scott Lahteine
b376c7e374
Group DISABLED items
2019-03-17 07:56:35 -05:00
InsanityAutomation
691e5c3bb8
BLTouch V3.0 support ( #13406 )
2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
InsanityAutomation
09eb30dc05
IDEX Mirror mode based on Formbot / Vivedino Symmetric mode ( #13404 )
2019-03-15 22:46:27 -05:00
Scott Lahteine
9a515cbd32
Fix Pause Print message and behavior ( #13394 )
2019-03-14 02:26:07 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h ( #13388 )
2019-03-14 02:25:42 -05:00
Andrei Pozolotin
cc8a871705
Add capability string CHAMBER_TEMPERATURE ( #13391 )
...
Reference: #13380
2019-03-13 18:09:22 -05:00
Scott Lahteine
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
2019-03-13 06:51:15 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops ( #13386 )
2019-03-13 05:48:36 -05:00
InsanityAutomation
c03df89921
ExtUI Mesh Leveling Extensions ( #13363 )
2019-03-13 00:45:52 -05:00
InsanityAutomation
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
2019-03-13 00:42:50 -05:00
Scott Lahteine
d63da4592d
Tweak to SCARA_move_to_cal
2019-03-12 22:06:50 -05:00
Scott Lahteine
d94e077901
Apply HAS_HOTEND_OFFSET where needed
2019-03-11 20:58:27 -05:00
Scott Lahteine
e52bcc9408
Limit top bed temp to BED_MAXTEMP - 10
...
The chances of a 10° overshoot is pretty minimal.
2019-03-11 16:32:34 -05:00
Michiel Baird
b824a517aa
Add G38.4 and G38.5 ( #13348 )
2019-03-10 17:22:09 -05:00
Tobias Frost
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
2019-03-09 14:20:37 -06:00
Marcio Teixeira
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
2019-03-09 14:20:37 -06:00
InsanityAutomation
d54741eda8
Update some G26 plausible values. Add speed control. ( #13330 )
2019-03-08 03:13:44 -06:00
3dlabsio
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
2019-03-07 02:09:39 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
2019-03-05 06:46:19 -06:00
Scott Lahteine
2e5a3b01fd
Save Power Loss Recovery only on move commands
2019-03-05 02:43:29 -06:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans ( #13298 )
2019-03-05 00:41:31 -06:00
Chris Pepper
2513f6b550
Fix multiport G28 with Binary Transfer ( #13308 )
2019-03-04 16:44:54 +00:00
Scott Lahteine
35ae5daf2d
Split up sdcard G-codes
2019-03-03 01:52:15 -06:00
Scott Lahteine
3f36a38512
Clean up some pre-serial-redirect includes
2019-03-03 01:52:15 -06:00
Scott Lahteine
edc4e037c4
Add a note to G10
2019-03-02 17:19:36 -06:00
Chris Pepper
b0553d2d97
Add M997 support and simple implementation for LPC176x ( #13281 )
2019-03-01 20:11:50 -06:00
Scott Lahteine
2f1e1dcb42
Gradual step towards EXTRUDERS 0 support
2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
2019-03-01 00:27:45 -06:00
Chris Pepper
7de6476b3d
Fix binary protocol error
2019-02-28 02:31:42 +00:00
Scott Lahteine
2c10222e87
card.transfer_port => transfer_port_index
2019-02-27 20:14:17 -06:00
Chris Pepper
4ab433d391
Fix binary protocol with one serial port ( #13270 )
...
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
2019-02-27 19:57:48 -06:00
Bob Kuhn
ddbe4cfa20
Printrboard G2 support ( #13116 )
2019-02-26 21:03:13 -06:00
Scott Lahteine
5d28575d4d
Clean up some motion code
2019-02-25 16:01:42 -06:00
Scott Lahteine
808b076000
Update some ABL/UBL conditionals
2019-02-25 16:01:42 -06:00
Scott Lahteine
64253e1a58
Followup to serial reform
...
Reference #13250
2019-02-25 00:20:36 -06:00
Minims
92a4984066
Fix G34 probe position ( #13251 )
2019-02-24 13:57:30 -06:00
Scott Lahteine
e15354e387
Simplify serial port redirect ( #13234 )
2019-02-23 22:53:01 -06:00
Bruce j Beare
562f2321d2
Fix a G34 bug, allow negative Z corrections ( #13240 )
2019-02-23 02:41:52 -06:00
Marcio Teixeira
109e67169c
Define G21 as NOOP w/o INCH_MODE_SUPPORT ( #13229 )
...
Ticket #13228
If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.
2019-02-22 15:35:32 -06:00
Scott Lahteine
80359c9937
Add more parameters to M240
...
Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>
2019-02-20 14:51:36 -06:00
Scott Lahteine
89bbc30a09
Fix init of power supply pin
...
Fix #13184
2019-02-20 05:29:05 -06:00
LinFor
ba39186364
TMC_DEBUG optimization and improvements ( #13135 )
2019-02-20 02:22:42 -06:00
Scott Lahteine
3a1b6fe8c1
Coding standards
2019-02-19 14:58:39 -06:00
InsanityAutomation
19af90face
Fix a host action compile error ( #13208 )
2019-02-19 14:47:31 -06:00
Scott Lahteine
e00aad84af
Add M240 parameters D I J R S
2019-02-14 20:00:40 -06:00
Marcio Teixeira
31c240a8db
Enhancements to G425 ( #13159 )
...
- Turn off bed leveling prior to calibrating.
- This prevents lateral probes from having a Z component that
triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
- Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
- Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
- Not necessary to disable global endstops
2019-02-14 16:45:31 -06:00
Scott Lahteine
ab2816c870
Patch for M240
2019-02-14 15:13:57 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move ( #13168 )
2019-02-14 15:09:35 -06:00
Scott Lahteine
be9a409980
Fix M125 XY parameters, export get_homing_bump_feedrate
2019-02-14 05:25:46 -06:00
Scott Lahteine
ce40c2e87c
Use do_blocking_move_to(ref, fr)
2019-02-14 02:22:08 -06:00
Scott Lahteine
7cf9b93f26
Add HAS_FILAMENT_SENSOR ahead of 12962
2019-02-12 20:13:20 -06:00
revilor
e56c13670d
Service interval watchdog ( #13105 )
2019-02-12 15:58:56 -06:00
InsanityAutomation
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Scott Lahteine
894f5c24a8
Fix trailing whitespace
2019-02-12 14:25:57 -06:00
Roman Moravčík
bace52afd7
Fixed compilation with MMU2_MENUS disabled ( #13140 )
2019-02-12 12:55:49 -06:00
Scott Lahteine
9737608f0a
Enable gradient when alias is cleared
2019-02-10 06:39:12 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) ( #13022 )
2019-02-10 04:54:23 -06:00
AnHardt
0e37fe8776
Apply minimum C in M303 ( #13113 )
...
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
2019-02-10 03:54:45 -06:00
Scott Lahteine
f269766408
Put the MMU2 menu with the others
2019-02-06 17:38:46 -06:00
Marcio Teixeira
e1604198ff
G425 — Auto-calibrate Backlash and Nozzle Offsets ( #13050 )
2019-02-06 17:20:17 -06:00
Mark Zachmann
19cf72e057
Support individual solenoid disable with M381 ( #13008 )
2019-02-06 06:34:53 -06:00
teemuatlut
d81342254a
Support new TMC drivers ( #13026 )
2019-02-06 06:33:14 -06:00
Rolf Werum
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
2019-02-06 06:30:53 -06:00
Scott Lahteine
1bd9a63049
Add HAS_EXTRA_ENDSTOPS macro
2019-02-06 05:10:05 -06:00
Scott Lahteine
1497fb388a
M29 match logic was reversed ( #13013 )
...
* M29 logic was reversed
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
* Update queue.cpp
* Update queue.cpp
2019-02-04 07:23:42 -06:00
Scott Lahteine
b5fd2fb58b
Allow M29 to be processed late
2019-02-04 07:23:02 -06:00
Scott Lahteine
c03bac9ad4
Update queue.cpp
2019-02-04 07:17:40 -06:00
Scott Lahteine
a49f0205ea
Update queue.cpp
2019-02-04 07:11:08 -06:00
jeffstaley
2f176d6fb8
Flush RX buffer on G-code line errors to prevent hang ( #13018 )
2019-02-04 06:03:49 -06:00
Scott Lahteine
4200bd2fc1
Report on M92 with no arguments ( #12833 )
2019-02-04 05:24:15 -06:00
Scott Lahteine
433518de74
Prevent M420 error from disconnecting OctoPrint
...
Just echo the error instead of labeling it `Error:`.
2019-02-04 01:54:43 -06:00
Scott Lahteine
4fa1c52688
Tweak serial output code
2019-02-03 01:09:14 -06:00
Scott Lahteine
a5e3384691
Pre-apply cosmetic changes to mixing
2019-02-03 01:09:14 -06:00
mattfredwill
c3cb449990
TMC2130 dual-stepper Sensorless Homing ( #13061 )
2019-02-01 18:09:01 -06:00
revilor
6a57d0b381
Prusa MMU2 ( #12967 )
2019-01-31 19:10:52 -06:00
InsanityAutomation
a1d03fe7ba
Fix single nozzle fan ( #13038 )
2019-01-30 20:54:04 -06:00
Scott Lahteine
97da6c1da5
Use MIN/MAX for min/max
2019-01-28 20:36:13 -06:00
Giuliano Zaro
a79d80c78e
Minor cleanup of pause code ( #13030 )
2019-01-27 23:10:25 -06:00
InsanityAutomation
48a3502656
Remote streamer improvements ( #12982 )
2019-01-27 22:43:13 -06:00
jeffstaley
3f91233f6d
M29 logic was reversed
...
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
2019-01-25 07:36:52 -08:00
jeffstaley
0e0cc13650
Fix M29 for Pronterface SD card upload ( #13010 )
2019-01-24 21:10:59 -06:00
Scott Lahteine
8f9b246d0e
Tweak some formatting, replace tabs
2019-01-24 13:18:56 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
Scott Lahteine
6453b82a5e
Clean up trailing whitespace
2019-01-23 15:57:01 -06:00
InsanityAutomation
a1cf49935d
Add laser control menu ( #12883 )
2019-01-20 23:41:47 -06:00
InsanityAutomation
75f2665f2e
LCD SD Card items near top when not using wheel ( #12926 )
2019-01-20 23:24:53 -06:00
Scott Lahteine
0495fcd475
Minor spacing fix
2019-01-20 00:10:50 -06:00
Ludy
acf266fe78
Fix a compile warning, etc. ( #12955 )
2019-01-19 18:47:29 -06:00
Scott Lahteine
ce563d7c2e
Various general cleanups
...
Mostly from the L6470-oriented PR
2019-01-19 16:56:12 -06:00
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
2019-01-17 13:17:16 -06:00
Marcio Teixeira
f11c6d5d02
Fix M107 when dual-nozzles share fan ( #12819 ) ( #12909 )
2019-01-15 18:45:18 -06:00
InsanityAutomation
59b18aaeef
Allow resume from pause with parking enabled ( #12893 )
...
Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people.
I understand more work needs to be done to resolve some of the concerns...
2019-01-15 07:58:54 -07:00
Giuliano Zaro
85f149befe
Save some progmem ( #12913 )
2019-01-14 20:56:30 -06:00
teemuatlut
1a79878dff
Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN
2019-01-12 18:07:28 -06:00
Scott Lahteine
7cfce20cd3
Update comments on M125
2019-01-12 17:52:44 -06:00
InsanityAutomation
ed3ab5e212
Fix M24 not starting new job ( #12887 )
2019-01-12 15:30:44 -06:00
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
2019-01-12 00:41:48 -06:00
InsanityAutomation
a403d9a50c
Improve menu pause / resume ( #12876 )
2019-01-11 20:42:11 -06:00
Scott Lahteine
fb8111553e
getStatus => report_status
2019-01-11 19:51:00 -06:00
Giuliano Zaro
709a6356f7
Remove obsolete test conditions ( #12829 )
2019-01-05 14:02:45 -06:00
Luu Lac
bcf347403b
Fix M106 extruder & fan count ( #12820 )
2019-01-05 14:01:35 -06:00
Marcio Teixeira
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
2019-01-03 08:36:43 -06:00
Ludy
14a7faf087
Fix compile warning comparison uint and int ( #12788 )
2019-01-01 18:20:12 -06:00
Marcio Teixeira
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
InsanityAutomation
4f2473053c
Fix M106 with SINGLENOZZLE
2018-12-31 20:10:18 -06:00
Ludy
814d93c7cf
Fix G33 sprintf output warning ( #12738 )
2018-12-27 18:05:42 -06:00
InsanityAutomation
530ef5846f
Make nomove=false for toolchange on filament swap ( #12739 )
2018-12-27 11:38:35 -06:00
Luc Van Daele
c6e09c2689
[2.0.x] G33 clean up ( #12648 )
...
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
2018-12-18 12:43:38 -06:00
Marcio Teixeira
902d5b0f8b
Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY ( #12628 )
2018-12-12 17:21:37 -06:00
teemuatlut
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
2018-12-09 20:54:48 -06:00
MasterPIC
3bb8b3529a
Center ABL grid on bed with H parameter. ( #12610 )
2018-12-09 11:24:48 -06:00
Marcio Teixeira
b22716e938
M425 Backlash Correction ( #11061 )
2018-12-08 14:36:46 -06:00
Scott Lahteine
b7e38ea249
Signal an invalid mesh for M420 enable / load
2018-12-07 16:14:11 -06:00
teemuatlut
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
2018-12-07 15:34:21 -06:00
Scott Lahteine
261c6f4b96
Fix pause/resume SD print
...
Followup to #12551 , addressing #12566
2018-11-30 19:23:08 -06:00
Scott Lahteine
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES ( #12559 )
2018-11-30 12:31:42 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type ( #12557 )
2018-11-29 16:58:58 -06:00
Scott Lahteine
03ef2d6c82
Fix "paused" message and M125 called by M25 ( #12551 )
2018-11-28 19:28:31 -06:00
Scott Lahteine
5b24ce9024
Hide M217 compile warning
2018-11-26 16:52:16 -06:00
Scott Lahteine
1fcc13b011
Allow Serial Overrun Protection to be disabled
2018-11-23 21:07:38 -06:00
Scott Lahteine
d29cb09b3e
Fix a minor compile warning
2018-11-22 05:35:38 -06:00
Scott Lahteine
817a37169a
Apply/unapply const here and there
2018-11-20 06:44:21 -06:00
Scott Lahteine
a4c15dc54f
Modify MBL to use IJ instead of XY ( #12478 )
2018-11-19 09:08:15 -06:00
kAdonis
4ae9a06c60
Update M303.cpp ( #12471 )
2018-11-18 18:04:51 -06:00
Marcio Teixeira
c1e17037e5
Various fixes for MarlinUI and ExtUI ( #12439 )
2018-11-17 22:21:44 -06:00
Giuliano Zaro
43ecdb606f
Fix a compile warning ( #12452 )
2018-11-17 07:08:25 -06:00
Ludy
56a94c2a26
Use 'target_extruder' in M104 as with M109 ( #12448 )
2018-11-17 06:55:25 -06:00
Scott Lahteine
66580f32c2
Make CardReader class static ( #12451 )
...
* Make CardReader a static class
* Make CardReader flags into bitfields
2018-11-16 22:39:16 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
2018-11-16 20:47:07 -06:00
Scott Lahteine
0e610815e4
No need for Cap:PAREN_COMMENTS
2018-11-16 04:28:40 -06:00
Scott Lahteine
7a075a5dc9
Tweak extruder errors
2018-11-16 01:32:21 -06:00
Scott Lahteine
2d92f333f5
Fix GcodeSuite::T active_extruder reference
2018-11-15 14:07:24 -06:00
Scott Lahteine
d2bb53702a
Optimize target_extruder, ignore T with mixing ( #12432 )
...
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
2018-11-14 17:33:04 -06:00
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering ( #12430 )
...
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
2018-11-14 13:13:51 -06:00
Scott Lahteine
54ec5528a0
hasstatus => has_status
2018-11-14 01:34:28 -06:00
Roxy-3D
cda5ef08fa
Debug of G2-G3 for UBL ( #12386 )
...
Changes only affect UBL. Everything else is left alone.
2018-11-13 11:20:21 -06:00
Scott Lahteine
143b2896e0
Add M412 to enable/disable filament runout detection ( #12406 )
2018-11-12 21:29:46 -06:00
Scott Lahteine
a163c89c6a
Followup to 50af1d1
2018-11-12 20:31:53 -06:00
Scott Lahteine
50af1d1e08
Differentiate translated On/Off from Serial ON/OFF
2018-11-12 17:23:08 -06:00
Scott Lahteine
da17f8ad37
For now (!) don't synchronize in M204 and M205
...
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
2018-11-12 02:43:24 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
...
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 12:16:24 -06:00
Scott Lahteine
471f403a67
Reduce code size with plain inlines
2018-11-11 08:36:10 -06:00
Scott Lahteine
6093df11dc
Allow G26 to use the active extruder ( #12387 )
...
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
2018-11-10 18:07:38 -06:00
Scott Lahteine
bed15fcd81
Tweak 'echo_not_entered' used by MBL's G29
2018-11-10 01:32:51 -06:00
Scott Lahteine
78ccedd6a8
Fix M91x sanity-check to permit TMC2660
...
Fix #12362
2018-11-09 05:48:15 -06:00
revilor
b60abc7c37
[2.0.x] Macro G-codes ( #9365 )
2018-11-09 05:25:08 -06:00
InsanityAutomation
6471a75a22
Combine more tool-change variables ( #12137 )
2018-11-06 22:22:20 -06:00
Scott Lahteine
812f6a7dd7
Fix Resume from SD Pause
...
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
2018-11-06 21:09:37 -06:00
Scott Lahteine
488a17b3f5
Use IS_SD_PRINTING() more
2018-11-06 20:55:17 -06:00
Marcio Teixeira
4dbaa6369f
Fix const pointer assignment compile error ( #12350 )
2018-11-06 19:49:39 -06:00
Scott Lahteine
e574f01568
More advanced pause tweaks ( #12356 )
...
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
2018-11-06 19:25:57 -06:00
Scott Lahteine
4c5ca89d8c
Show the appropriate pause message ( #12348 )
2018-11-06 04:13:48 -06:00
Scott Lahteine
b3b4e6dc45
Change Marlin debug flag names to fix conflicts ( #12340 )
...
In reference to #11000
2018-11-05 22:48:28 -06:00
Scott Lahteine
04f173790f
Remove trailing whitespace
2018-11-05 22:38:20 -06:00
Scott Lahteine
486f2a66a9
Fix MBL XY parameter error messages
...
Fix #11522
2018-11-05 04:17:37 -06:00
Scott Lahteine
2613ddf61c
Fix "circle"
2018-11-05 04:17:37 -06:00
Scott Lahteine
427bc64ba1
G28 O respects HOME_AFTER_DEACTIVATE
...
Addressing #11271
2018-11-05 04:17:37 -06:00
Scott Lahteine
498dfa291e
Update and fix CHDK
2018-11-05 04:17:37 -06:00
Scott Lahteine
3cbc3ecdd7
Fix 'M43 T' to use 'L' as last pin
...
- The documentation is correct. The code was wrong.
2018-11-05 04:17:37 -06:00
Scott Lahteine
07a0822ebe
M420 support in MARLIN_DEV_MODE
2018-11-04 20:54:38 -06:00
Scott Lahteine
44fa7fb18c
Cleanups for leveling-related code
2018-11-04 19:07:47 -06:00
Scott Lahteine
cc2bc67440
ENABLED(NEWPANEL) => HAS_LCD_MENU
2018-11-04 19:06:10 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup ( #12322 )
...
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
2018-11-04 02:25:55 -06:00
Scott Lahteine
d1ff22b983
Revive SCARA's home offset (unimplemented)
2018-11-03 06:24:41 -05:00
Scott Lahteine
e4cf175163
Synchronize on M204, M205 ( #12302 )
...
* Add parser.seen for multiple parameters
* Fix M666, use !seen for report
* Synchronize on M204, M205
2018-11-03 01:16:37 -05:00
Ludy
5ba6607181
Fix keypad-related compile error ( #12306 )
2018-11-02 22:29:32 -05:00
Scott Lahteine
3eb9838dca
Simplify TMC sanity-checks
2018-11-02 01:15:49 -05:00
Scott Lahteine
31c28d0dd2
Drop pgm_read_*_near and let headers choose ( #12301 )
...
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
2018-11-02 00:42:16 -05:00
Ludy
9f77df2590
Followup to menu refactor. TMC warnings, sanity. ( #12288 )
...
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
2018-11-01 16:13:33 -05:00
Scott Lahteine
42f8b6c530
Make M125 work with SDSUPPORT ( #12289 )
2018-11-01 15:03:45 -05:00
Scott Lahteine
44f2a82a56
Move axis_homed, axis_known_position to motion.*
2018-10-31 17:44:42 -05:00
Chris Pepper
66d44c72c3
Add fast binary file transfer to SD card option ( #12249 )
2018-10-30 19:44:12 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor ( #12275 )
2018-10-30 16:34:45 -05:00
TheLongAndOnly
5536228359
G34 Auto-align multi-stepper Z axis ( #11302 )
2018-10-29 14:01:36 -05:00
Scott Lahteine
2bf18950ab
Refactor LCD menus
2018-10-28 15:46:45 -05:00
MasterPIC
6fbc87301f
'G29 H' to set a centered square probe area (linear, bilinear) ( #12242 )
2018-10-27 20:30:21 -05:00
TheSFReader
a07ac6312f
G0 feedrate may be fixed or variable ( #12172 )
2018-10-25 10:35:16 -05:00
Ludy
a93e9e6e9b
Use preheat labels in place of PLA/ABS ( #12194 )
2018-10-23 15:38:17 -05:00
Scott Lahteine
b381cad399
Clean up trailing whitespace
2018-10-19 15:27:17 -05:00
TheSFReader
1fb9b299d4
Add M524 to abort SD printing ( #12155 )
2018-10-19 14:25:07 -05:00
Scott Lahteine
c6a5c74208
Add parentheses to SD macros
2018-10-19 13:52:57 -05:00
Marcio Teixeira
71e19baf69
Fix kill => disable_all_heaters => print_job_timer.stop ( #12146 )
...
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
2018-10-18 21:20:56 -05:00
InsanityAutomation
3ec3872730
Single Z raise value for all tool-changing / parking ( #12090 )
...
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
2018-10-17 11:11:41 -05:00
Marcio Teixeira
f98f4ac7ea
Fix and improve EXTENSIBLE_UI ( #12117 )
...
- Add methods to access print counter data
- Clean up some inconsistent method names
- Clear lcd status after filament change
- Implement `lcd_reset_status` so it works like UltraLCD
2018-10-16 16:58:29 -05:00
Scott Lahteine
8bf596bd4c
RETRACT_ZLIFT => RETRACT_ZRAISE
2018-10-16 16:46:40 -05:00
Scott Lahteine
bf0c809ff2
Update M165 comment
2018-10-16 06:10:27 -05:00
AnHardt
9ac9649183
Mixer - update descriptions ( #12108 )
2018-10-16 06:09:02 -05:00
AnHardt
f56968ba0b
New Continuous Filament Mixer ( #12098 )
2018-10-16 03:38:57 -05:00
Scott Lahteine
84b59d58fb
Clean up whitespace
2018-10-16 02:02:20 -05:00
TheSFReader
af939c158a
Option for G0 to have a separate feedrate ( #12089 )
2018-10-16 01:49:51 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise ( #12076 )
2018-10-13 23:08:20 -05:00
Scott Lahteine
45e738876a
Add stepper MS3 support
...
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
2018-10-11 01:10:11 -05:00
Giuliano Zaro
d43d4e4219
Refactor PRINTER_EVENT_LEDS, apply to M303 ( #12038 )
...
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
2018-10-10 21:25:43 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage ( #12054 )
...
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
2018-10-10 09:45:20 -05:00
Scott Lahteine
07d33849b0
Fix unused var warning, apply ENABLED
2018-10-09 21:31:28 -05:00
Scott Lahteine
ce82015d5f
Fix include in G80
2018-10-09 17:24:56 -05:00
Scott Lahteine
5f6aabccbe
Tweak M48 spacing
2018-10-08 19:11:25 -05:00
Marcio Teixeira
906a24fa81
Extensible user interface API ( #11193 )
2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4
Various fixups for single-nozzle filament swap ( #12036 )
2018-10-08 15:39:55 -05:00
Scott Lahteine
55e810d512
Fix G80 compilation
2018-10-08 13:11:36 -05:00
Scott Lahteine
7db0113b53
Improve E_AXIS_N macro
2018-10-07 18:22:05 -05:00
Sam Lane
f2ecf8d510
Add option to control Solenoids under PARKING_EXTRUDER ( #12028 )
2018-10-07 17:07:12 -05:00
InsanityAutomation
74cd6cb4fc
Single nozzle filament change ( #11994 )
2018-10-07 17:06:14 -05:00
Scott Lahteine
d6b0fbd771
Use uint8_t for all fan speeds ( #12032 )
2018-10-07 15:34:41 -05:00
teemuatlut
c447d75916
Add support for TMC2660 ( #11998 )
2018-10-06 17:18:10 -05:00
Scott Lahteine
52a37913c1
Extend and apply some corrections
2018-10-06 00:27:21 -05:00
thesfreader
e09c144674
Add CNC-like G-code options
2018-10-06 00:15:27 -05:00
Scott Lahteine
3e58b3a5d4
Followup to #11943
2018-10-03 02:55:10 -05:00
teemuatlut
c3229e1b34
Migrate to a new TMC library ( #11943 )
2018-10-03 02:48:49 -05:00
Eduardo José Tagle
d6955f25b2
Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes ( #11988 )
2018-10-03 00:47:27 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers ( #11977 )
2018-09-30 23:44:33 -05:00
AnoNymous
b30ca652ae
Replace MIN# / MAX# with variadic MIN / MAX ( #11960 )
2018-09-30 04:59:14 -05:00
Thomas Moore
3286325044
Add TMC2130 sensorless probing
2018-09-29 18:54:14 -05:00
Giuliano Zaro
70e7a465d8
[2.0.x] Fix compile error ( #11951 )
...
Fix compile error intruduced with M109 modification
2018-09-29 13:48:23 -05:00
Scott Lahteine
1410e79e7f
Ensure M109 handles autotemp
2018-09-29 02:12:06 -05:00
Scott Lahteine
e4389f7d23
Standard methods to wait for heating ( #11949 )
2018-09-29 01:44:47 -05:00
Victor Tseng
93839e2f73
Add option to enable/disable autoretract altogether ( #11904 )
2018-09-28 16:52:56 -05:00
Scott Lahteine
cb6454118c
Workaround for Pronterface M29
2018-09-27 16:27:02 -05:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET ( #11916 )
2018-09-24 21:46:56 -04:00
InsanityAutomation
1104054d73
2.0 IDEX Independent z offset and other fixes ( #11862 )
...
* Add Formbot Raptor board
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Add a second Z probe Z offset
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Modify method to utilize live adjustment of hotend z offset
Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems
* Move config item and catchup other code to current method
2018-09-24 09:40:48 -05:00
Marcio Teixeira
c411e7eb0d
[2.0.x] Squelch compiler warnings seen with -Wall ( #11889 )
2018-09-23 12:00:34 -04:00
Scott Lahteine
e4ee607fc8
Fix Dual X FRS in M600
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2018-09-18 21:23:33 -05:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors ( #11861 )
2018-09-18 01:10:41 -05:00
Scott Lahteine
c5e5cc5e9f
Fix some trailing whitespace, macros
2018-09-17 17:30:04 -05:00
Roxy-3D
0780913848
IDEX Improvements ( #11848 )
2018-09-17 01:06:22 -05:00
Scott Lahteine
53bd0b55cb
Followup for 6 extruders
2018-09-16 23:57:50 -05:00
Scott Lahteine
1718eff54a
Code changes supporting up to 6 extruders
2018-09-16 22:32:53 -05:00
Thomas Moore
c437bb08f1
Overhaul of the planner ( #11578 )
...
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
2018-09-16 21:24:15 -05:00
Holger Müller
1a6f2b29b8
Add support for Triple-Z steppers/endstops
2018-09-16 00:35:58 -05:00
Sam Lane
4f883d5971
[2.0.x] Extruder-Distinct Linear Advance K Factors ( #11789 )
2018-09-10 22:37:32 -05:00
Sam Lane
1b6bc19427
Add external closed loop controller support
2018-09-10 03:17:17 -05:00
Alexander Amelkin
bc1ba998b2
[2.0.x] Fix undefined symbol 'g29_in_progress' ( #11781 )
2018-09-09 22:06:03 -05:00
InsanityAutomation
bad225dc04
Fix mesh leveling compile errors ( #11768 )
2018-09-09 04:19:48 -05:00
Scott Lahteine
2a61c9a939
Various fixups to configs, spacing, etc.
2018-09-06 06:44:31 -05:00
Scott Lahteine
d10f29ae2e
Pass segment length in G2-G3
2018-09-06 01:43:27 -05:00
Roxy-3D
d5379ee9d6
Fix search for white space in enqueued commands
2018-09-05 16:57:08 -05:00
Scott Lahteine
d1ceaf5550
[2.0.x] Followup to IDEX changes ( #11707 )
2018-09-03 23:15:31 -05:00
Scott Lahteine
8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x
...
[2.0.x] Editable servo angles
2018-09-03 03:55:38 -05:00
Roxy-3D
7680b64aa6
IDEX clean up ( #11690 )
2018-09-02 10:18:59 -05:00
scott0122
607c1e58d9
Improve HOTEND OFFSET Z display precision to 3 ( #11685 )
2018-08-31 15:14:33 -05:00
Scott Lahteine
3e81745e81
Fix issues, make optional
2018-08-29 17:58:02 -05:00
Jan
aa80e448e2
Store servo angles in EEPROM
2018-08-29 17:58:02 -05:00
Scott Lahteine
2a2e8c314e
Suppress emergency parser G-code errors
...
Co-Authored-By: srieche <srieche@users.noreply.github.com>
2018-08-29 01:04:55 -05:00
Scott Lahteine
d1c9517903
Followup to hotend_offset[Z] patch
2018-08-24 21:32:00 -05:00
Colin Gilgenbach
593d5375ea
Fix G28 resetting DUAL_NOZZLE_DUPLICATION_MODE ( #11605 )
...
There's no reason for G28 to reset DUAL_NOZZLE_DUPLICATION_MODE, because it only affects the E stepper, unlike DUAL_X_CARRIAGE which affects the X steppers as well.
2018-08-21 23:42:55 -05:00
Scott Lahteine
8f0bbdcc9b
Fix up Max7219 orientations ( #11596 )
2018-08-21 02:06:18 -05:00
Scott Lahteine
56f1e17a25
[2.0.x] Max7219 cleanup, simplify, and extend ( #11575 )
2018-08-18 01:33:13 -05:00
Roxy-3D
aae4c67e5d
Max7219 Clean Up ( #11563 )
...
Some of the Rotations did not do the right thing with setting and clearing pixels.
I think it is correct now. But if not... It is much closer to being correct.
2018-08-15 21:22:28 -05:00
Scott Lahteine
a4b0148365
Easier to find 'static inline'
2018-08-13 23:55:33 -05:00
Roxy-3D
65c5227c29
Change M7219 I to setup Max7219 registers, but not do initialization pattern
2018-08-13 17:46:48 -05:00
Roxy-3D
60f1376798
Make M7219 I more robust and nice to look at
...
Make M2719 initialize the Max7219 registers and then run the initialization pattern (if one is specified).
2018-08-13 16:59:25 -05:00
Roxy-3D
fd15b1495a
add I parameter to M42 to allow access to sensitive pins
2018-08-13 16:57:09 -05:00
Scott Lahteine
0af22549a6
Allow G33 to compile with no LCD
2018-08-11 22:32:09 -05:00
Giuliano
4237c3d9f8
[2.0.x] different bltouch init ( #11135 )
2018-07-26 05:04:09 -05:00
Scott Lahteine
e05e95cf97
Clean trailing whitespace
2018-07-25 18:49:47 -05:00
teemuatlut
fbcdf5eaeb
Simplify stepper driver per-axis selection
2018-07-25 02:47:43 -05:00
Scott Lahteine
4685c7d59f
Followup to M91x I patch
2018-07-24 18:30:28 -05:00
Roxy-3D
9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 ( #11285 )
...
* Add Multi Unit Support for Max7219 to bugfix_2.0.0
* Apply multi-MAX7219 to example configs
* Tweak some spacing, macros
2018-07-19 13:56:47 -05:00
Giuliano
aed1d17a2d
Initialize default units ( #11295 )
...
When `INCH_MODE_SUPPORT` is enabled no default unit is set. This fixes it.
2018-07-17 19:37:30 -05:00
Scott Lahteine
fd8a76493b
Unify M91x parameter I meaning, simplify reports ( #11249 )
2018-07-12 22:31:51 -05:00
etagle
1367df2875
Replace double with float, optimize calculation
2018-07-04 22:28:56 -05:00
Scott Lahteine
d960d448fa
Optimize calculations with LROUND
2018-07-04 22:22:28 -05:00
Scott Lahteine
9c058091e9
No M914 or SGT set for non-sensorless axes
2018-07-03 20:09:13 -05:00
Scott Lahteine
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY ( #11187 )
2018-07-02 23:21:28 -05:00
Scott Lahteine
e0ab8acf19
Add "Marlin Dev Mode" option
2018-07-02 22:55:21 -05:00
Scott Lahteine
c51e27d11d
Do a hard kill for failed homing moves ( #11161 )
2018-06-30 21:54:07 -05:00
Scott Lahteine
90ba77ea0f
Lose the old HOMEAXIS macro
2018-06-30 18:13:13 -05:00
Scott Lahteine
8eaac0dab3
Add delta feedrate scaling ( #11153 )
2018-06-30 13:44:27 -05:00
Scott Lahteine
05518d6add
Add newline to end of file
2018-06-29 23:54:16 -05:00
Scott Lahteine
a431013eb7
Fix G33 compile warning
2018-06-29 23:17:51 -05:00
Colin Gilgenbach
0fff79c24b
Fixes G29_with_retry behavior ( #11045 )
...
* Fix G29 (ABL) retry behavior
2018-06-29 20:48:11 -05:00
Scott Lahteine
a264030526
Fix "G29" G29_MAX_RETRIES handling
2018-06-29 18:46:31 -05:00
Andy Shaw
3b3029c4bf
Make max_e_jerk an array to reduce CPU usage ( #11118 )
2018-06-26 22:38:31 -04:00
Scott Lahteine
229b26b02c
Clear LED matrix without startup test
2018-06-26 18:54:01 -05:00
Scott Lahteine
a2a30ff0ac
Use Tool 0 for Dual X Axis G29
...
See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325
2018-06-20 01:32:23 -05:00
Scott Lahteine
e366d55bc2
Don't reset stepper timeout for all g-codes
2018-06-19 21:48:28 -05:00
Roxy-3D
7c54c4ed27
Tiny improvement to M7219
...
The registers within the Max7219 can get corrupted a number of ways. This allows the Max7219 to be reset and fully initialized.
And... it also allows the user to see the initialization pattern.
2018-06-19 14:46:30 -05:00
Scott Lahteine
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 ( #11034 )
2018-06-18 22:04:03 -05:00
Scott Lahteine
e23677a7b2
Update some G-code comments
2018-06-18 16:13:01 -05:00
Giuliano
cce0523a95
[2.0.x] reset bltouch on home ( #11018 )
...
Added reset bltouch instead. This ensure properly stow even when in error.
2018-06-13 14:09:13 -05:00
Karl Andersson
e0276d2f32
Official STMicroelectronics Arduino Core STM32F4 HAL compatibility ( #11006 )
2018-06-12 18:38:00 -05:00
Scott Lahteine
9d04f47d98
Improvements for junction_deviation_mm
...
- Drop `max_jerk` with `JUNCTION_DEVIATION`
- Add `max_e_jerk_factor` for use by `LIN_ADVANCE`
- Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes
- Fix LCD editing of `junction_deviation_mm`
2018-06-11 22:05:16 -05:00
Scott Lahteine
f2c3b0d476
Use bit flags for homed/known
2018-06-11 22:05:16 -05:00
Scott Lahteine
4832be52d7
Followup to G29 O
2018-06-11 21:57:26 -05:00
Robert Mendon
86170e6a66
[2.0.x] Add O (optional) flag to G28/G29 ( #10913 )
2018-06-11 21:51:48 -05:00
Scott Lahteine
117fd007a9
Followup to pin error change
2018-06-10 19:28:45 -05:00
Scott Lahteine
20a5db03bb
Junction Deviation limit (0.01 to 0.3)
2018-06-10 18:22:08 -05:00
Scott Lahteine
a2f521d34b
Add Junction Deviation mm runtime setting ( #10990 )
2018-06-10 18:02:54 -05:00
Scott Lahteine
590ce1c33e
Fix serial debug ouput
2018-06-10 17:54:22 -05:00
Scott Lahteine
968a5d2e63
Protected pin err for M226
2018-06-10 17:45:47 -05:00
Giuliano
f1cdfe3dfd
[2.0.x] stow bltouch before start homing ( #10987 )
2018-06-10 16:27:14 -05:00
etagle
99af086cea
Add hidden Serial overflow debug options
2018-06-10 04:25:42 -05:00
Scott Lahteine
3f2a062a57
Fix M914 value range (-64...+63)
...
Fix #10896
2018-05-29 12:02:15 -05:00
Eduardo José Tagle
6f330f397e
[2.0.x] Buffer overflow and scroll fix, UTF8 cleanup ( #10844 )
2018-05-25 23:32:37 -05:00
Scott Lahteine
645df23eb0
Fix warning with FASTER_GCODE_PARSER disabled
2018-05-25 06:45:42 -05:00
Scott Lahteine
a94506ada0
Fix K8400 Y min pos, M118 comment
2018-05-24 08:21:16 -05:00
Scott Lahteine
230ae6a143
Default G30 to engage / disengage
2018-05-23 16:57:23 -05:00
etagle
a11eb50a3e
Refactor and optimize Stepper/Planner
...
Better encapsulation and considerably reduce stepper jitter
2018-05-20 06:23:58 -05:00
Scott Lahteine
83d42f33e1
Add HAS_HOTEND_OFFSET_Z conditional
2018-05-19 17:05:15 -05:00
GMagician
3c76bda2d8
Fix switching extruder
...
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
2018-05-19 17:05:15 -05:00
Scott Lahteine
c173a31060
Fix some compile warnings
2018-05-19 16:54:48 -05:00
Scott Lahteine
50270b53a0
Clear up some more compile warnings
2018-05-17 18:40:49 -05:00
Scott Lahteine
eb2eb72720
Modify UBL mesh_is_valid and use in leveling_is_valid ( #10746 )
2018-05-14 22:36:03 -05:00
Scott Lahteine
35258dd50b
Consistent heating status and status reset
...
Fix #10699
2018-05-13 17:18:19 -05:00
Scott Lahteine
08e36e264e
Apply _AXIS macro
2018-05-13 06:51:01 -05:00
Scott Lahteine
99ecdf59af
Smarter MIN, MAX, ABS macros
...
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-13 04:52:56 -05:00
Scott Lahteine
8f8c6a9bc4
Move get_axis_position_mm to Planner ( #10718 )
2018-05-12 09:59:11 -05:00
Scott Lahteine
f5aaa2d6c0
Fix some compiler warnings
2018-05-12 05:28:12 -05:00
Scott Lahteine
625035a9ce
Fix M301 access to lpq_len ( #10714 )
...
Co-Authored-By: Zwaubel
2018-05-12 02:13:40 -05:00
Scott Lahteine
306f0f2135
Move Stepper::synchronize to Planner ( #10713 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-12 01:38:02 -05:00
ManuelMcLure
8679f671ed
Remove dependency on PI. ( #10701 )
2018-05-11 17:55:56 -05:00
Scott Lahteine
6671c064cd
Use arc moves for G26 if enabled ( #10696 )
...
Co-Authored-By: ManuelMcLure <manuelmclure@users.noreply.github.com>
2018-05-11 02:15:14 -05:00
Scott Lahteine
c43235dd39
Remove non-special comments
2018-05-11 00:36:04 -05:00
ManuelMcLure
613a3be167
Remove hidden dependencies on destination. Fixes #10686 . ( #10691 )
2018-05-11 00:30:51 -05:00
Scott Lahteine
b76344c080
More Trinamic cleanup
2018-05-10 00:12:10 -05:00
Giuliano
44f3a6dc3b
[2.0.x] Add missing axes to M911, M912 ( #10668 )
2018-05-09 17:58:11 -05:00
Scott Lahteine
19f189b4e5
Add UBL support for G2/G3 and G5 ( #10648 )
2018-05-08 11:10:45 -05:00
Scott Lahteine
bfe223e120
Adjust usage of stepper.synchronize
2018-05-06 01:24:14 -05:00
Scott Lahteine
af1950a63e
Improve sync of stepper positions
2018-05-06 01:24:14 -05:00
Scott Lahteine
d7b699ec34
Fewer includes of vector_3.h
2018-05-01 07:05:18 -05:00
Scott Lahteine
05fca752d6
Clean up autostart handling
2018-05-01 01:35:57 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
2018-04-30 21:16:31 -05:00
Scott Lahteine
59fda986ea
Allow Z_AFTER_PROBING to be 0
2018-04-30 03:25:47 -05:00
Scott Lahteine
9e0d99c0c6
Round all floats in string conversion functions ( #10566 )
2018-04-29 00:51:36 -05:00
Scott Lahteine
cd08f01bb4
Fix M421 comment in gcode.h
2018-04-28 11:16:52 -05:00
Scott Lahteine
8db7fb226a
Fix M420 C for UBL
2018-04-28 08:14:20 -05:00