zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
9418 commits 1 branch 0 tags 156 MiB
Commit graph

7779 commits

Author SHA1 Message Date
LVD-AC a9bc1d30cc z_offset change 
Avoids to have to recalibrate the delta_height after a z_offset change
 2017-04-26 21:57:11 +03:00
Roxy-3D ec26e23e7e Add my two 'Nice' machines as example configurations 
These are my two 'Nice' machines.  Both are good example machines.  The
FolgerTech i3-2020 is probably the best value kit on the market right
now.  And it has developed a 'Cult Following' of hobbiests.  I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.

And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin.  For sure, I'll always have up to the minute Configuration.h
files for this printer also.   I've moved over to using the gMax as my
primary development machine for Marlin.   So...  Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
 2017-04-26 12:46:12 -05:00
Scott Lahteine adb8e68592 Fix stuck "Print Aborted" LCD message 
Fixes #6393
 2017-04-26 06:24:23 -05:00
Scott Lahteine 096b927102 Minor optimization of FILAMENT_WIDTH_SENSOR 2017-04-26 06:24:23 -05:00
Scott Lahteine 5bdb0b567d Cosmetic patches 2017-04-26 06:24:23 -05:00
Kai 38ae7f4238 Added more translation strings 
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
 2017-04-26 11:58:11 +02:00
Scott Lahteine 4d96d3eab1 Bootscreen delay after clear, then set chars 
Fixes #6426
 2017-04-25 23:37:28 -05:00
Scott Lahteine 5512130d6c Only set Compare Mode for channel A 
Fixes #6445
 2017-04-25 23:14:16 -05:00
Roxy-3D d467e97679 Smart-Fill and Mesh-Tilting (both 3-point and grid) working! 
Also...   The memory corruption issue may be fixed.   The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
 2017-04-25 21:03:41 -05:00
Scott Lahteine a699967ec8 Merge pull request #6443 from thinkyhead/rc_interrupt_fastio 
Patch fastio.h with Timer 2 interrupt support
 2017-04-24 20:09:41 -05:00
Scott Lahteine 2823bf0874 Update fastio.h with special handling for Timer 2 2017-04-24 16:58:22 -05:00
Scott Lahteine fd535e111a Fix up XYZ_CONSTS_FROM_CONFIG macro 2017-04-24 14:05:11 -05:00
Kai 03c2f756b9 Update language_de.h 2017-04-24 13:32:16 +02:00
LVD-AC dcf30a69d6 Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS] 
More consistent with M665 where C-value is allowed as well, then
normalized
 2017-04-23 14:51:24 +03:00
Brian f41fb2b635 Numerous UBL-related changes: 
* relocated ubl state to config. store:
 * removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
 * modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
 * removed pre_initialized state, saving 64 bytes of SRAM;
 * removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
 2017-04-22 18:44:39 -05:00
Brian f1a4758cef use progmem instead of sram for mesh_index_to_x/ypos array; 
fix maximum mesh_index_ array size at 16 (15+1);
 2017-04-22 18:34:49 -05:00
Scott Lahteine 87d240042a Optimize number-to-string functions, no-fan display 2017-04-22 16:23:15 -05:00
Scott Lahteine 959566cf0a Update note about M163 / M164 2017-04-22 16:23:15 -05:00
Scott Lahteine 830851df13 Spend some SRAM to optimize bilinear leveling 2017-04-22 16:19:31 -05:00
Scott Lahteine 091179d960 bed_level_grid => z_values (also *_virt array) 2017-04-22 16:19:31 -05:00
Scott Lahteine 23cdbbb2d3 Add a method to refresh bilinear bed level after a change 2017-04-22 16:19:30 -05:00
Scott Lahteine ccda63c473 Drop the accessor form for LCD value editing 2017-04-22 16:19:30 -05:00
Scott Lahteine 10da175be5 Fix a pair of compiler complaints 2017-04-22 16:19:30 -05:00
Scott Lahteine ff0018e287 Format hex values as uppercase 2017-04-21 21:42:41 -05:00
android444 77aa16005d Polish font 
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
 2017-04-21 21:42:41 -05:00
teemuatlut 244f67590e Delta probe height bug solved 2017-04-22 02:23:56 +03:00
Hans Raaf 406a83ff2d Fix for Meshpositions if printer has negative endstop positions 2017-04-22 00:16:16 +02:00
benlye 3ed737425d Fix typo in new SET_COM macro 2017-04-21 15:08:18 -05:00
Brian 88649b06a6 use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height 2017-04-21 09:09:09 -05:00
LVD-AC 004928148c Tower angles 
Adding '7-point' tower angle correction calibration
 2017-04-21 12:48:45 +03:00
LVD-AC 76ec7a0f80 Adding upto 7*7 probe grids 
- adding Cn 5, 6 and 7
 2017-04-21 11:58:39 +03:00
LVD-AC d4f593d200 Delete 'expert level' 
and getting rid off verbose level 3 and configuration_adv settings
 2017-04-21 11:58:39 +03:00
LVD-AC 13c8493878 M665 rework and related issues (all delta's) 
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration)

- M665 B also sets the radius for manual calibration menu

- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard

- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
 2017-04-21 11:58:39 +03:00
Scott Lahteine e0e069c6d8 Clean up trailing whitespace 2017-04-20 17:52:07 -05:00
Scott Lahteine 9b94210394 Bring FLSUN config more up to date 2017-04-20 17:52:06 -05:00
Scott Lahteine b0aa256bc0 Updates for all configs 2017-04-20 17:52:05 -05:00
Scott Lahteine ee46ce1743 Add and apply interrupt helper macros 2017-04-20 16:04:29 -05:00
Scott Lahteine 6131c62499 General cleanup 2017-04-20 16:04:29 -05:00
benlye 2c86dfd3b5 Fix compiler type conversion errors after LCD changes 2017-04-20 16:04:29 -05:00
Scott Lahteine 55f9e76610 Merge pull request #6367 from thinkyhead/rc_cleanup_followup 
Cleanup after some direct commits
 2017-04-20 15:13:24 -05:00
Scott Lahteine d38a792a91 Merge pull request #6382 from MagoKimbra/fix_configuration_store 
Fix double definition in configuration_store
 2017-04-20 15:06:58 -05:00
Scott Lahteine b98bc034ae Replace c_assert hack with static_assert 2017-04-19 13:07:35 -05:00
Scott Lahteine 5eb2b1a790 Clear up G29 compiler warnings 2017-04-19 13:07:35 -05:00
Scott Lahteine 4ce2a63db0 Apply const, spacing to Marlin_main.cpp 2017-04-19 13:07:34 -05:00
Scott Lahteine e97f1284c1 Cleanup of pins testing code 2017-04-19 13:07:34 -05:00
Scott Lahteine e9b53ae00c Cleanup after some direct commits 
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
 2017-04-19 13:07:34 -05:00
Scott Lahteine e05d050a1e Add hex routine to print an address 2017-04-19 13:07:34 -05:00
Scott Lahteine 4542282f5e Fix broken TOGGLE macro in fastio.h 2017-04-19 12:38:13 -05:00
MagoKimbra ed52275a14 Fix double definition in configuration_store 2017-04-18 17:57:40 +02:00
Scott Lahteine de569e3d4e Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes 
M43 Toggle & Z servo test - fix bug & add another check
 2017-04-18 03:21:57 -05:00
Scott Lahteine f33a650ecc Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom 
Add Linear Advance values to EEPROM and LCD
 2017-04-18 02:54:12 -05:00
Scott Lahteine a00ae4790a Replace M905 with unique code M900 2017-04-17 16:39:37 -05:00
Scott Lahteine 1286d9603d Clean up and organize ultralcd.cpp 2017-04-17 16:39:36 -05:00
Scott Lahteine 3cdf78a79f MSG_VOLUMETRIC => MSG_FILAMENT 2017-04-17 16:39:36 -05:00
Thomas Moore f8e77d6545 Add Linear Advance values to EEPROM and enable configuration of K via LCD 2017-04-17 16:39:36 -05:00
Scott Lahteine eb2d073dae Add M905 R for setting the E/D ratio directly 2017-04-17 16:39:36 -05:00
Scott Lahteine 69dfa54a84 Use code_value_linear_units for known-linear axes 2017-04-17 16:39:36 -05:00
Scott Lahteine b956f2642b Show M503 report with current linear units 2017-04-17 16:39:36 -05:00
Scott Lahteine ba4a005ceb Merge pull request #6373 from mtowara/mt_makefile_fix 
Fix Makefile build
 2017-04-17 16:16:37 -05:00
towara 150b15c311 fix compiler errors generated by more stringent flags in Makefile: 
- use volatile for registers
- avoid implicit casts
 2017-04-17 11:59:47 +02:00
towara f6095c9325 fix missing serial.cpp in Makefile 2017-04-17 11:59:03 +02:00
Scott Lahteine 871f92378c Tweak headings in EEPROM structure 2017-04-16 18:42:33 -05:00
Scott Lahteine bf2548be4a Merge pull request #6362 from tcm0116/babystepping 
Only queue babysteps if axis is in a known position
 2017-04-16 17:46:06 -05:00
dot-bob 9c410ddf68 Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly. 2017-04-15 22:45:15 -06:00
Thomas Moore 72a7fac461 Only queue babysteps if axis is in a known position 2017-04-15 23:19:43 -05:00
Roxy-3D 5e9726530f Setup to find data corruption and general clean up 
This data corruption problem is very difficult.  Just changing the code
a little bit changes whether the problem even happens and what is
affected.  I need these changes in the main branch so I can operate with
the extra debug code always available and turned on.

Everything is setup such that if M100 is turned off or DEBUG(ECHO) is
turned off, the code is not affected.   M100 has been made a little bit
more inteligent so it can display the serial command buffers in a more
meaningful way (because the data corruption seems to often times end up
in that area).
 2017-04-15 19:26:43 -05:00
Scott Lahteine e519e95953 Merge pull request #6358 from thinkyhead/rc_doubleclick_fix 
Show Cancel/Continue screen for ABL "Level Bed"
 2017-04-15 17:25:37 -05:00
Scott Lahteine a81606c680 Show Cancel/Continue screen for ABL "Level Bed" 2017-04-15 16:51:03 -05:00
Scott Lahteine 51021bc7b8 Merge pull request #6353 from thinkyhead/rc_endstop_coolness 
Clean up endstop triggering code
 2017-04-15 16:49:54 -05:00
Scott Lahteine 857dec0990 Merge pull request #6342 from benlye/benlye-fix-softspi 
Fix softspi variant conditional for 1284p
 2017-04-15 16:33:50 -05:00
Scott Lahteine 4e04383d18 Merge pull request #6354 from thinkyhead/rc_doubleclick_fix 
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
 2017-04-15 16:06:29 -05:00
Thomas Moore 8dd0492e68 Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined 2017-04-15 14:44:50 -05:00
benlye 0a2f60fab4 Make spi.h inclusion conditional 
spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.
 2017-04-15 16:22:42 +01:00
Bob-the-Kuhn 60471b7592 minor improvements 
Configuration_store.cpp - changed a couple of print statements so the
values were printed.  The old method resulted in the formula being
printed.

ubl_G29
1) added support for R option to P4.  Now probes all points unless R is
present and the number is greater than 0.

2) P2 - moved map print statement so it showed the point that was
currently being probed,  The old location did this only for the first
point.

3) P4 - Moved the map print for the same reason.

ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
 2017-04-15 09:31:55 -05:00
Scott Lahteine 25a61e9061 Improve motion-based endstop triggering code 2017-04-15 06:16:50 -05:00
Scott Lahteine a2356c2825 Fix compiler warning about z-offset callback 2017-04-15 02:50:27 -05:00
Scott Lahteine 037c964d26 Reverse bools on prepare_move sub-functions 2017-04-15 01:08:19 -05:00
Scott Lahteine d9c4333806 Extra logging of Dual X modes 2017-04-15 01:08:19 -05:00
Scott Lahteine 4067d15c92 Cleanup, extend TMC2130 implementation 2017-04-14 23:00:00 -05:00
Scott Lahteine d60c02c5b1 Cleanup, extend TMC2130 configuration 2017-04-14 22:43:56 -05:00
Scott Lahteine 0e97b3d6d0 Fix some configuration spacing 2017-04-14 22:36:10 -05:00
Scott Lahteine cf6f483378 Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal 
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
 2017-04-14 22:32:12 -05:00
Scott Lahteine 24882adfbf Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION 
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
 2017-04-14 21:56:49 -05:00
Bob-the-Kuhn 1acb84ba02 fix 1 bug, add error messages 
===============================================

make changes requested by reviewers

===============================================

add M43 test to Travis, fix EOL, remove trailing spaces
 2017-04-14 20:57:45 -05:00
LVD-AC 8821963873 Implement delta auto-calibration and delta_height 2017-04-14 19:46:31 -05:00
Scott Lahteine b305699046 Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset 
Fix lcd_babystep_zoffset()
 2017-04-14 19:11:46 -05:00
LVD-AC 03bda24d19 Add delta auto-calibration and configuration for Flsun AC 2017-04-14 19:08:14 -05:00
Scott Lahteine 1bd25fd2b3 Clean up config spacing, section headings, etc. 2017-04-14 19:06:31 -05:00
Scott Lahteine 153b0ae967 Tweak Delta Printer configuration note 2017-04-14 19:06:06 -05:00
Scott Lahteine 81ffd98dd9 Allow faux leveling 2017-04-14 19:06:06 -05:00
Scott Lahteine 2355d87e11 Merge pull request #6346 from thinkyhead/rc_broken_abl_test 
Add support for SOLENOID_PROBE
 2017-04-14 18:36:32 -05:00
Scott Lahteine f4685c28b7 Reorder Conditionals_post.h and add comments 2017-04-14 18:18:21 -05:00
Scott Lahteine 0ac2b5c045 Additional 5 extruders support (solenoids, microstepping) 2017-04-14 18:18:20 -05:00
Scott Lahteine fd2a0784ba Add support for SOLENOID_PROBE 2017-04-14 17:24:36 -05:00
Scott Lahteine 5803ba43a9 Expose EXT_SOLENOID as an advanced option 2017-04-14 17:24:36 -05:00
Scott Lahteine ea734f910b Use direct pin manipulation whenever possible 2017-04-14 16:55:35 -05:00
Scott Lahteine 19d0c6a0c0 Patch to init W with RGBW_LED 2017-04-14 16:55:23 -05:00
Scott Lahteine 3e079660b0 Never define SLED_PIN 2017-04-14 16:36:32 -05:00
benlye 1a447d0047 Fix variant conditional for 1284p 2017-04-14 18:46:09 +01:00
benlye 1f9ee42750 Fix lcd_babystep_zoffset() 
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
 2017-04-14 18:38:35 +01:00
Bob-the-Kuhn 445d39e95a CORExx endstop detection fixes 
1. The CORExx printers were checking more endstop axis than needed.

2. Removed all the CORE_xx_NOT logic.  The motor_direction(xx) routine
always returns the correct data so it is not needed.  It was actually
cause the wrong direction to be checked in some cases.

3. Made the logic/defines for X, Y & Z axis all the same.  The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.

4. Added a check for zero steps before the X, Y & Z axis.  Previously
would check the they axis even if there were no movement.
 2017-04-13 21:43:37 -05:00
Roxy-3D 28fec61f92 M100 Fixes and Features 
All the memory accesses need to be unsigned char in  order to avoid
false errors being detected.   Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
 2017-04-13 18:20:53 -05:00
Scott Lahteine 52c3ace102 Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Scott Lahteine cd4e6abec8 Group BABYSTEPPING options together 2017-04-13 16:26:45 -05:00
Scott Lahteine 60ac41a32c Add code to handle changes to zprobe_zoffset 2017-04-13 15:46:35 -05:00
Scott Lahteine 8fa4209916 Movement/adjustment should be reverse of probe offset change 2017-04-13 15:46:05 -05:00
Thomas Moore 361655828f Use babystepping to adjust bed probe z-offset 2017-04-13 15:46:05 -05:00
Scott Lahteine 36e5c7c389 Merge pull request #6330 from thinkyhead/rc_improvements 
Sanity check per-axis options' array sizes
 2017-04-13 13:08:44 -05:00
Scott Lahteine 02fca543bb Merge pull request #6272 from thinkyhead/rc_adc_variable_rate 
Make ADC sensor reading frequency adjustable
 2017-04-13 12:49:31 -05:00
Scott Lahteine 34308368c0 Sanity check per-axis settings for size 2017-04-13 11:35:20 -05:00
Scott Lahteine ac96ae89f9 Apply const in Stepper::isr 2017-04-13 06:20:36 -05:00
Scott Lahteine 2fa1e882d0 Merge pull request #6325 from thinkyhead/rc_M20_with_size 
Simplified M20 with size
 2017-04-13 05:06:52 -05:00
Bob-the-Kuhn 1b12fea0fa simplified M20 with size 2017-04-13 04:56:58 -05:00
Scott Lahteine 4022b971db Merge pull request #6315 from thinkyhead/rc_unify_M421 
Unify M421
 2017-04-12 19:43:28 -05:00
Scott Lahteine b236562354 Merge pull request #6306 from thinkyhead/cleanup_after_6302 
Adjustments to M100
 2017-04-12 19:12:27 -05:00
Scott Lahteine 5e4f4d387f Swap MBL z_values dimensions to [X][Y] 2017-04-12 17:24:05 -05:00
Scott Lahteine 063f641651 Unify M421 2017-04-11 15:46:13 -05:00
Scott Lahteine 6d5400dc31 Merge pull request #6240 from thinkyhead/rebuild_rgb_led 
Extend RGB LED with Printer Events
 2017-04-11 15:16:57 -05:00
Scott Lahteine dac21ec680 Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
Scott Lahteine e7746ffee4 Extend RGB LED support, adding Printer Events 2017-04-11 12:15:41 -05:00
Scott Lahteine c7063eb55c theTarget => target_temp 2017-04-11 12:15:41 -05:00
Scott Lahteine 36bda2bade Add HAS_RESUME_CONTINUE shorthand macro 2017-04-11 12:15:40 -05:00
Scott Lahteine 53e6c33c37 2 is DXC_DUPLICATION_MODE 2017-04-11 12:15:40 -05:00
Scott Lahteine a2cb0a3d54 Use multiply for delta probe constraint 2017-04-11 12:15:40 -05:00
Scott Lahteine 6487c96a4a Merge pull request #6313 from Kaibob2/patch-10 
Allow 10mm Movements for Z-Axis
 2017-04-11 12:04:10 -05:00
Kai 001bc14255 Allow 10mm Movements for Z-Axis 
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
 2017-04-11 18:39:26 +02:00
Scott Lahteine 6a9b008044 Fix MINIMUM_STEPPER_PULSE maths 2017-04-11 11:11:17 -05:00
Scott Lahteine 68773f4486 Simplify stepper macros by renaming enable/disable macros 2017-04-11 11:10:26 -05:00
Scott Lahteine e02a5a6371 Add macros for delays by machine cycle 2017-04-11 09:18:32 -05:00
Scott Lahteine ecc537015a Have M109 / M190 do nothing with no parameters 2017-04-11 05:06:25 -05:00
Scott Lahteine 03aa9a390e Apply coding standards to M100, break up into functions 2017-04-10 21:09:43 -05:00
Scott Lahteine 48c16fc6ef Merge pull request #6307 from thinkyhead/rc_less_no_reentrance 
Only lcd_synchronize needs no_reentry
 2017-04-10 20:58:32 -05:00
Scott Lahteine 4fcfe926d6 Only lcd_synchronize needs no_reentry 2017-04-10 20:13:23 -05:00
Scott Lahteine 67fb7f82ac Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade 
Save / restore z_fade_height in EEPROM
 2017-04-10 20:05:20 -05:00
Scott Lahteine eff5af569b Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report 
Fix mbl_mesh_report
 2017-04-10 19:37:19 -05:00
Scott Lahteine 4a18968c10 Merge pull request #6297 from Kaibob2/patch-9 
Fix EPROM -> EEPROM
 2017-04-10 19:35:30 -05:00
Roxy-3D ba85faabc0 Fix M100 Free Memory Checker 
M100 had numerious changes and quit working.   Part of the problem is
the overloading of the SERIAL_PROTOCOL functions.   Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number.     M100 is working again.   Let's keep it that way!

M100 has been expanded to now have a function  int
free_memory_is_corrupted()  that can be called from other code to see if
the free space is still contiguous.  It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted()  is doing the right thing
and what it found at various points when it was called.     A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
 2017-04-10 15:33:55 -05:00
Kai 3b82db5fe9 Missing semicolon in ultralcd.cpp 
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
 2017-04-10 14:45:51 -05:00
MagoKimbra 7d2e637867 Fix mbl_mesh_report 2017-04-10 20:50:19 +02:00
Kai afeb0452ef Fix EPROM -> EEPROM 
These fixes are neede because before it showed the englisch text even if language = de was selected
 2017-04-10 18:37:00 +02:00
Scott Lahteine 7f950a80c0 Make ADC sensor reading frequency adjustable 2017-04-09 22:18:21 -05:00
Scott Lahteine 786af73e24 Convert config code to a static class 2017-04-09 22:06:41 -05:00
james94jeans2 5b9476fe78 Added z_fade_height to EEPROM-Settings 
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
 2017-04-09 21:16:58 -05:00
Scott Lahteine 9343f6a95f Put TOSHIBA with other stepper driver options 2017-04-09 20:52:49 -05:00
Scott Lahteine 7a704af5e6 Merge pull request #6284 from thinkyhead/rc_wt150_rebase 
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
 2017-04-09 20:27:44 -05:00
Max Matveev 2031fb913b Fixed comparison of float values to NaN 2017-04-09 20:28:46 +02:00
Scott Lahteine e48a52a530 Patch a display issue with LCD_DECIMAL_SMALL_XY 
The `ftostr4sign` function got munged by the `WITHIN` patch
 2017-04-09 10:25:35 -05:00
Scott Lahteine 1a3cd6a090 Merge pull request #6213 from thinkyhead/rc_gitattributes 
Init bed_level_virt_interpolate on EEPROM load
 2017-04-09 08:13:11 -05:00
Scott Lahteine 314a02e2d5 Toggle with XOR 2017-04-09 07:58:47 -05:00
Scott Lahteine 8bc0d90b00 Init bed_level_virt_interpolate on EEPROM load 2017-04-09 07:04:20 -05:00
MD 20dd5376b8 Cheaptronic V2 
Add support for new electronics
www.reprapobchod.cz
 2017-04-09 06:57:43 -05:00
Scott Lahteine 4cdda5615b Bring other configs up to date with wt150 changes 2017-04-09 06:45:42 -05:00
Paweł Stawicki 9b0885f4f6 Allow boards without a thermistor 2017-04-09 06:45:41 -05:00
Paweł Stawicki 64cfcebe66 Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors. 2017-04-09 06:45:03 -05:00
Paweł Stawicki 0eb16d9ff7 Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller 2017-04-09 06:44:54 -05:00
Paweł Stawicki 652bedfa18 Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE 2017-04-09 06:44:53 -05:00
Paweł Stawicki 44cdebb8f1 Add software spi support for max6675 2017-04-09 06:44:53 -05:00
Paweł Stawicki 191fec009f Add digipot i2c control for MCP4018 2017-04-09 06:44:53 -05:00
Scott Lahteine e5b16081cb Update TinyBoy2 configurations 2017-04-09 06:44:53 -05:00
Scott Lahteine 1855534f20 Config files cleanup 2017-04-09 06:44:52 -05:00
Scott Lahteine c26a315d0b Additional missed patches 2017-04-09 04:24:23 -05:00
Scott Lahteine 39617e10b8 Patch configs comment formatting 2017-04-09 03:49:16 -05:00
Scott Lahteine c54f6cf23d Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
Scott Lahteine 2b88ccd0aa Apply UBL mesh bounds to remaining configs 2017-04-09 03:49:15 -05:00
Scott Lahteine 60be3d264b Macros to print floats, hiding imprecision 2017-04-09 03:48:40 -05:00
Scott Lahteine b356d73239 Merge pull request #6278 from thinkyhead/pr_delta_angles 
Followup to additional delta trim options
 2017-04-08 22:25:57 -05:00
Jimmy Envall f78d44e91a Added support for delta tower angle corrections. 2017-04-08 21:13:44 -05:00
Scott Lahteine d3b4d84586 Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix 
Unify UBL Command Parsing
 2017-04-08 20:17:46 -05:00
Scott Lahteine d4ce839351 Cleanup following Pins Debug update 2017-04-08 18:59:57 -05:00
Scott Lahteine c7a8f7970b Formatting / cleanup 2017-04-08 18:59:57 -05:00
Scott Lahteine 29d4ec8257 Support 5 extruder auto fans 2017-04-08 18:59:57 -05:00
Scott Lahteine 824f3c1c0d Fix up configuration comments 2017-04-08 18:59:56 -05:00
Scott Lahteine 995ed90248 Clean up Filament Width Sensor comments 2017-04-08 18:59:56 -05:00
Scott Lahteine 5a7b810fdd General comment cleanup 2017-04-08 18:58:33 -05:00
Scott Lahteine 0027c22839 Drop extraneous calls to lcd_update 2017-04-08 18:58:33 -05:00
Scott Lahteine d6db7a9b03 patch "step_remaining" 2017-04-08 18:13:20 -05:00
Scott Lahteine cbc2331187 Use LCD_MESSAGEPGM over lcd_setstatuspgm 2017-04-08 18:04:39 -05:00
Scott Lahteine 3729510b1e Set and check main parameter values, report all errors 2017-04-08 17:15:55 -05:00
Roxy-3D 34d3ed9ab1 These items were removed from the UBL Command Parsing 
Having these items randomly (and errorniously) disappear cost me several
hours of work yesterday.
 2017-04-08 15:30:20 -05:00
Scott Lahteine 15edb41cee Patches to UBL 2017-04-08 14:59:14 -05:00
Roxy-3D 14cf527bb8 Getting setup for debugging 2017-04-08 14:59:14 -05:00
Scott Lahteine f8408036f2 Merge pull request #6264 from thinkyhead/rc_five_extruders 
Support up to 5 extruders in Marlin
 2017-04-07 12:48:56 -05:00
Bob-the-Kuhn f7fc49c3a3 Finish name change 
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
 2017-04-07 11:05:24 -05:00
Scott Lahteine 832064e4f2 Implementation changes to support 5 extruders 2017-04-07 10:46:37 -05:00
Scott Lahteine 04050237f0 Header and pins changes to support 5 extruders 2017-04-07 10:46:36 -05:00
Scott Lahteine 2a84122edd Configuration changes to support 5 extruders 2017-04-07 10:46:35 -05:00
Scott Lahteine edf18977c1 Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
Scott Lahteine dc84678fc1 Fix HOTEND_STATUS_ITEM for graphical display 2017-04-06 23:07:30 -05:00
Scott Lahteine a0de5d94e2 Merge pull request #6258 from benlye/benlye-bilinearfix2 
Better fix for bilinear Z offset and G29 Z (update to #6251)
 2017-04-06 20:51:57 -05:00
Scott Lahteine b23aef5b8d Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2 
Message for every KILL and STOP (also need delays)
 2017-04-06 20:40:12 -05:00
Roxy-3D 945303c0d5 eleminate bootscreen.h 2017-04-06 19:55:41 -05:00
Roxy-3D ef3da3971e Update ubl.h 2017-04-06 19:55:41 -05:00
Roxy-3D 8644dc170b get synchronized to current file names 2017-04-06 19:55:41 -05:00
Roxy-3D 1451b7eacf UBL's Grid Based Leveling code 
Pretty much...  The code is in place.  Still more work to do.    But it
has a lot of hooks and variables in other code, so commit and merge
before I pick up a million 'Conflicts'.
 2017-04-06 19:55:41 -05:00
Bob-the-Kuhn 549055f20c Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency 
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
 2017-04-06 16:35:50 -05:00
Bob-the-Kuhn a77875c9d2 Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry 
Another BLTouch retry place (replaces PR #6108)
 2017-04-06 16:25:55 -05:00
Bob-the-Kuhn 3b9ff2cb12 Merge pull request #5676 from Bob-the-Kuhn/configuration.h 
Configuration.h - reword Z PROBE section
 2017-04-06 16:18:34 -05:00
Bob-the-Kuhn 6643d553f6 # This is a combination of 2 commits. 
# This is the 1st commit message:

MCP4728 consistency & fix ultralcd.cpp

The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.

PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.

This change moves the default settings to Configuration_adv.h.

Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp

===========================================================

reword stepper curent section for clarity

===========================================================

change name & improve comments

===========================================================

changed name from A4JP to SCOOVO_X9H per PR #6139

# This is the commit message #2:

fix typo
 2017-04-06 16:16:27 -05:00
Bob-the-Kuhn a44b3432c1 add BLTouch retry to a second place & add/update delays 
=================================================

implement requested changes

=================================================

remove delays (they're in another PR) & move return
 2017-04-06 16:13:07 -05:00
Bob-the-Kuhn a5abc61fb9 Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins 
M43 - add Toggle utility and Z servo utility (replaces PR #5864)
 2017-04-06 16:10:50 -05:00
Bob-the-Kuhn 3b8926bd09 improved wording, consolidation of info, BLTouch warning 
==============================================

clarified BLTouch calculation & changed comment delimitters/flags

I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */

Made the BLTouch calculation simpler and clarified the units of measure
for the result.

============================================

add changes to example configurations

============================================

add TinyBoy2 to this PR & add BLTouch Delay
 2017-04-06 16:06:01 -05:00
Scott Lahteine 55d296aaf0 pinsDebug with more features, uses less RAM 
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.

Includes support for 1284 & 1286 families.

Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
.           without   52576
.           with new  64592
.           with old  62826
.           new-out   12016
.           old-out   10250
.           new-old   1766
.
RAM
.           without   2807
.           with new  2875
.           with old  3545
.           new-out   68
.           old-out   738
.           new-old   -670

==================================================================

minor changes - mostly formatting

1) added newline to end of teensyduino file

2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE.  Got warnings
about redefining TEENSYDUINO

3) removed some trailing spaces

reduce PROGMEM size & update pin list

Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function

This required creating two arrays of address pointers for the PWM
registers.

==================================================================

update with new M3, M4, M5 pin names

==================================================================

report I/O status for unused/unknown pins
 2017-04-06 16:06:01 -05:00
Scott Lahteine e116723b8b Adjust indentation in ubl.h 2017-04-06 16:06:00 -05:00
Scott Lahteine 1b3a26f2f5 Rename all UBL files with a ubl_ prefix 2017-04-06 16:06:00 -05:00
Scott Lahteine d13991ae18 Use same config name for all mesh dimensions 2017-04-06 16:05:59 -05:00
Bob-the-Kuhn f9686a108c add Z servo test and toggle pins to M43 2017-04-06 15:59:38 -05:00
Scott Lahteine 62cbaa302e Z_DUAL_ENDSTOP - make offset a configuration item 
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.

z_endstop_adj is initialized in two places so both had to be modified.
 2017-04-06 15:57:10 -05:00
Scott Lahteine c9e35004e7 pinsDebug with more features, uses less RAM 
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.

Includes support for 1284 & 1286 families.

Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
.           without   52576
.           with new  64592
.           with old  62826
.           new-out   12016
.           old-out   10250
.           new-old   1766
.
RAM
.           without   2807
.           with new  2875
.           with old  3545
.           new-out   68
.           old-out   738
.           new-old   -670

==================================================================

minor changes - mostly formatting

1) added newline to end of teensyduino file

2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE.  Got warnings
about redefining TEENSYDUINO

3) removed some trailing spaces

reduce PROGMEM size & update pin list

Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function

This required creating two arrays of address pointers for the PWM
registers.

==================================================================

update with new M3, M4, M5 pin names

==================================================================

report I/O status for unused/unknown pins
 2017-04-06 14:46:28 -05:00
Scott Lahteine 4abd53f65a Adjust indentation in ubl.h 2017-04-06 05:36:16 -05:00
Scott Lahteine f5c5c1f771 Rename all UBL files with a ubl_ prefix 2017-04-06 05:33:27 -05:00
benlye f1d50ac1dc Fixing bilinear Z offset and G29 Z 
The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling.  This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.
 2017-04-06 07:41:46 +01:00
Scott Lahteine eb1e6aa29b Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
Scott Lahteine c961dd084d Add hidden option to output Bilinear grids in JSON 2017-04-05 23:43:17 -05:00
Scott Lahteine df7b4252fd Reduce M420 code for UBL slightly 2017-04-05 22:30:29 -05:00
Scott Lahteine 8866158d03 Add LEVELING_DATA as a capability 2017-04-05 22:30:28 -05:00
benlye 0a2b4f3486 Fix bilinear levelling z offset 
Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.
 2017-04-05 22:01:40 -05:00
Scott Lahteine 44a849bdce Fix broken M206/M428/G92 offsets 2017-04-05 22:01:37 -05:00
Roxy-3D 52978e5ba5 Fix spelling mistake when UBL's mesh is Inactive 2017-04-02 20:07:09 -05:00
Roxy-3D 0423e93c42 Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL 
M421 was not connected up for AUTO_BED_LEVELING_BILINEAR.
M421 needed to migrate mesh data to new UBL EEPROM layout.
 2017-04-02 16:46:37 -05:00
Scott Lahteine 3412950abc Merge pull request #6209 from thinkyhead/rc_psu_zero 
Power Supply 0 as "General"
 2017-04-02 16:44:42 -05:00
Roxy-3D 3e9e94801f Fix problem described in issue # 6175 
As it turns out...   an unsigned int can not go to less than 0,  so the
loop never terminates.
 2017-04-02 13:00:27 -05:00
Scott Lahteine 289e3d6844 Merge pull request #6215 from thinkyhead/rc_bed_false_alarm 
Fix thermal runaway when nonexistent bed temp is set
 2017-04-02 11:59:58 -05:00
Scott Lahteine 948728e63b Fix line-endings in UBL_G29 2017-04-02 11:48:26 -05:00
Scott Lahteine 699310d1d2 Fix: Thermal runaway if nonexistent bed's temp is set 2017-04-02 11:48:10 -05:00
Scott Lahteine c56eec29f0 Configurable delay for BLTouch servo emulation 2017-04-02 11:14:53 -05:00
Scott Lahteine deaad78df9 Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap 
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
 2017-04-02 10:32:04 -05:00
Scott Lahteine 5bce731962 Fix LCD preheat menus 2017-04-02 09:32:22 -05:00
Scott Lahteine 4c72167af3 Prevent a warning on echo_command 2017-04-02 08:36:58 -05:00
Scott Lahteine 9b5fd9522e Fix formatting, order for a UBL change 2017-04-02 07:15:40 -05:00
Tannoo 54173c80ad Power Supply 0 as "General" 2017-04-02 06:21:34 -05:00
Scott Lahteine a2775d0c70 can wstring be removed? 2017-04-02 04:43:33 -05:00
Scott Lahteine de4e19f17e Patch MarlinSerial to match up with 32-bit version 2017-04-02 04:39:18 -05:00
Scott Lahteine 2cbc7b4b73 Relocate serial macros and functions 2017-04-02 01:05:25 -05:00
Scott Lahteine eaa66f3c46 Indent MarlinSerial code 2017-04-02 01:05:25 -05:00
Scott Lahteine 7a7a80e6c5 status_printf => lcd_status_printf_P 2017-04-02 01:05:25 -05:00
Scott Lahteine 0e6ec34228 Use PSTR versions of lcd_status... to save SRAM 2017-04-02 00:45:39 -05:00
Scott Lahteine 34e2420b9b Apply const args, clean up find_closest_circle_to_print 2017-04-01 23:15:41 -05:00
Scott Lahteine e19fbd27ce Minor spelling patch 2017-04-01 23:08:00 -05:00
Scott Lahteine 790a3e9a8c Remove extraneous check of UBL_G26_MESH_EDITING 2017-04-01 23:03:40 -05:00
Scott Lahteine 7310110ec0 Fix logic of UBL::fade_scaling_factor_for_z 2017-04-01 22:52:48 -05:00
Scott Lahteine 1a775cecac Revert behavior of enqueue_and_echo_commands_P 2017-04-01 21:53:46 -05:00
Scott Lahteine 79d42d87c1 Syntax cleanup 2017-04-01 21:53:46 -05:00
Scott Lahteine b47fd31c37 Revert some changes to UBL 2017-04-01 21:53:45 -05:00
Bob-the-Kuhn 185337e787 add delays to allow stop & kill messages to get out 2017-04-01 00:23:14 -05:00
Scott Lahteine 63abb65146 Update description of PINS_DEBUGGING 2017-03-31 18:57:48 -05:00
Scott Lahteine 73e193da1d Implement LCD_BED_LEVELING for PROBE_MANUALLY 2017-03-31 11:50:18 -05:00
Scott Lahteine fcadc7bb1a Implement the "manual" option for ABL 2017-03-31 11:50:18 -05:00
Scott Lahteine 9e22184936 Add a "manual" option for ABL 2017-03-31 11:50:18 -05:00
Scott Lahteine 541165e878 Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes 
Further adjustments to UBL code
 2017-03-31 11:35:02 -05:00
Scott Lahteine b19a15fa7f Within applied to UBL 2017-03-31 11:12:57 -05:00
Scott Lahteine 342ee458ae Additional UBL fixes, optimizations 2017-03-31 11:12:57 -05:00
Scott Lahteine a5e085cbea Have run_probe() return probe Z, not nozzle Z 2017-03-31 09:27:49 -05:00
Scott Lahteine 4487d22d56 Apply FIXFLOAT macro 2017-03-31 09:27:48 -05:00
Scott Lahteine 6cac0f43eb MBL fiddle 2017-03-31 09:27:48 -05:00
Scott Lahteine 25a6bfa7ed Add and apply WITHIN macro 2017-03-31 09:27:48 -05:00
Scott Lahteine 81136c1e82 Merge pull request #6177 from thinkyhead/rc_tinyboy 
Support for TinyBoy 2 3D printer (and its OLED display)
 2017-03-31 04:31:47 -05:00
Scott Lahteine 93aad54dc1 Clean up code, remove _now command function 2017-03-31 04:17:31 -05:00
Stefan Brüns 6ba6c92a81 Add example configuration for TinyBoy L10/L16 
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-31 04:05:35 -05:00
Stefan Brüns 0fe57ad4f5 Add Support TinyBoy2 OLED/Encoder panel 
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-31 04:05:34 -05:00
Scott Lahteine 65ca6472ba Make G26 compatible with G92 and M206 2017-03-31 02:20:20 -05:00
Scott Lahteine 4902fd4e95 More data in UBL class, make it a static class 
- Make all `unified_bed_leveling` data/methods static
- Move some UBL-related variables into the class
- Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`
 2017-03-31 02:20:20 -05:00
Scott Lahteine edbc024d76 Disable UBL_G26_MESH_EDITING by default 2017-03-31 02:20:20 -05:00
Scott Lahteine 9e4bd6b3b5 Further repairs to UBL, comments, spacing 2017-03-31 02:20:20 -05:00
Bob-the-Kuhn f3618c3337 Reduce UBL RAM usage by making G26/G29 optional 2017-03-31 02:20:19 -05:00
Scott Lahteine c9eb1d6ab7 Make MBL a static class, use lookup for index-to-point conversion 2017-03-31 01:28:07 -05:00
Scott Lahteine de9d2cddc3 Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc 
UBL cleanup, optimization
 2017-03-30 17:40:29 -05:00
Scott Lahteine 9217e4b8ec Various UBL cleanups and bug fixes 2017-03-30 17:09:49 -05:00
Scott Lahteine 9924199802 Merge pull request #5908 from thinkyhead/rc_fix_slowdown 
General minor cleanup
 2017-03-29 21:43:33 -05:00
Scott Lahteine 0e71e7b2fb Cleanup to planner.cpp 2017-03-29 06:48:07 -05:00
Scott Lahteine f105cad43c Marlin: Slight cleanup to Marlin_main.cpp 2017-03-29 06:40:29 -05:00
Scott Lahteine 499f9e04e1 Marlin: Temperature soft-PWM cleanup 2017-03-29 06:37:27 -05:00
Scott Lahteine 7ddd94dc61 Merge pull request #5994 from StefanBruens/fix_Makefile_errors 
Fix makefile errors, cleanup
 2017-03-29 06:32:08 -05:00
Scott Lahteine af09095f03 Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd 
Show Filament Width on LCD when SD is disabled
 2017-03-29 05:24:48 -05:00
Remo Kallio d38b1bc4b1 Show filament width sensor values in LCD constantly if SD card support is not enabled. 2017-03-29 04:03:08 -05:00
Scott Lahteine e3459ec178 Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles 
Fix delta_angles
 2017-03-29 03:35:18 -05:00
Scott Lahteine f49aec057f Tweak "can not" => "can't" in RUMBA pins 2017-03-29 01:04:50 -05:00
Scott Lahteine 0a23a1bb3b Dynamic feedrate on SCARA, converting target mm/s to deg/s 2017-03-28 17:21:07 -05:00
Roxy-3D d8724bb546 Get G29's P1 (Automated Probing) working again. 
Incorrect optimizations of data types and ternary operators caused some
issues.
 2017-03-28 17:11:02 -05:00
Scott Lahteine c7f6ee9c93 Board A4JP should be SCOOVO_X9H 2017-03-27 22:22:13 -05:00
Scott Lahteine a9fc30ae2e Use safe_delay to ensure watchdog reset 2017-03-26 23:49:56 -05:00
Roxy-3D 171904b6c7 Make G29 What command print reliably and fix G29 P1 bug Waldo found 2017-03-26 17:05:58 -05:00
Roxy-3D 9d3ac66f73 Map clean up of UBL 
UBL's maps are cleaner.   And with a 1 value, G29 O 1  will generate a
map suitable to be Cut & Pasted into Excel so a Suface Map can be
generated.
 2017-03-25 18:55:05 -05:00
Roxy-3D 9a1949a91e Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin 2017-03-25 10:15:40 -05:00
Roxy-3D aec85ad45a Start of process to get UBL running again. 
The wait_for_user change totally broke UBL.   But there is stuff wrong
now in the thermal code and/or LCD Panel code.
 2017-03-24 18:38:27 -05:00
Scott Lahteine b47eaf14ae Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither 
PWM dithering followup
 2017-03-24 18:21:07 -05:00
Scott Lahteine 34d1c41b5f Merge pull request #6111 from benlye/benlye-patch-echo_command 
Fix type conversion issue with echo_command
 2017-03-24 17:57:28 -05:00
benlye 6a601aca35 Fix type conversion issue with echo_command 
With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'".  This change resolves that.
 2017-03-24 17:23:02 +00:00
Scott Lahteine 009a6ddd39 Adjust bilinear grid in M851 2017-03-24 06:28:59 -05:00
Scott Lahteine eab7854a73 Merge pull request #6074 from thinkyhead/rc_immediate_shove 
Immediate commands take precedence
 2017-03-24 05:52:27 -05:00
Stefan Brüns 5699e2b881 Add SOFT_PWM_DITHER to other configurations 2017-03-24 05:02:24 -05:00
Scott Lahteine 5a2abeca78 Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither 
Enhancement of PWM, with dithering
 2017-03-24 04:57:40 -05:00
Scott Lahteine 043be2856b Use "& 0x3F" instead of "% 64" 2017-03-24 04:13:50 -05:00
Stefan Brüns 6a040a6967 SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound 
After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count
guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched
off in the first branch.
Do not evaluate the pwm conditions a second time, this reduces the
instruction count (4 instructions per PWM) and text size (6 byte).

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-24 04:13:50 -05:00
Stefan Brüns 0a74774af1 soft_pwm: avoid useless refetches of pwm_count 
The compiler is not able to reuse the value of pwm_count, but reloads it
on every evaluation, if is stored in a static variable, as it cannot prove
it will be unchanged. A variable with local scope may not be modified from
the outside, so its value can be reused.
Doing so reduces text size and instruction count.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-24 04:13:50 -05:00
Stefan Brüns 35a55d5757 SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more 
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.

This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-24 04:13:36 -05:00
Stefan Brüns 2aed66a955 temperature: Fix SOFT_PWM off by one 
A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a
PWM setting of 1/127 is active for 2/128, i.e. double the expected time,
or, in general n+1/128 instead of n/127.
Fixes issue#6003.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-24 04:13:36 -05:00
Scott Lahteine b5711a99a2 Patches to bring UBL closer to compliance 2017-03-24 01:37:52 -05:00
Scott Lahteine d076c1b604 Apply some general cleanup to code 2017-03-24 01:37:51 -05:00
Scott Lahteine d1e6b0e21a Reduce STEP_PULSE_CYCLES code slightly 2017-03-24 00:50:05 -05:00
Scott Lahteine 783338a0b8 Add UBL_MESH_EDIT_ENABLED to configs 2017-03-24 00:44:55 -05:00
Scott Lahteine 8d54ffbf05 Adjust vector_3 code with const, some optimization 2017-03-23 19:41:42 -05:00
Roxy-3D 8ee2612ebb The hex nibble routine can print again! 
The code to print a hex nibble got broke.   SERIAL_ECHO( (char) ) isn't
suitable for its use.
 2017-03-23 16:08:37 -05:00
Roxy-3D b8e4a6970b Get UBL up and running again 
All the changes to get the code into compliance with Marlin coding
standards made UBL sick.   This pretty much gets UBL back up and
running.
 2017-03-23 16:08:37 -05:00
Roxy-3D 5de1da2b3c Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option 2017-03-23 16:08:37 -05:00
Scott Lahteine 8f9face956 Merge pull request #6088 from rafaljot/patch-3 
Update Marlin_main.cpp
 2017-03-23 01:51:51 -05:00
Scott Lahteine 782634b6c9 Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping 
Add MINIMUM_STEPPER_PULSE ability to babystepping
 2017-03-22 21:57:36 -05:00
Scott Lahteine af2ea23e9c EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic 2017-03-22 20:51:12 -05:00
Scott Lahteine cd882b88db #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
Scott Lahteine e244399766 Additional cleanup of UBL code 2017-03-22 20:51:10 -05:00
Bob-the-Kuhn 0934563b97 G38 optional double touch 
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.

==============================================

Bugfix

The current G38 only stopped a move if it involved the Z axis.

Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.

Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.

==============================================

Change G38 back to using Z_MIN_PROBE

There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.

G38 started out as using the Z_MIN_PROBE pin.  I don't remember why we
changed it to the Z_MIN endstop.
 2017-03-22 15:08:49 -05:00
Scott Lahteine cc3204509c UBL patch from Bob-the-Kuhn 2017-03-22 07:54:20 -05:00
Scott Lahteine b904b5ae8d Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
Sebastianv650 bf57eb2447 Protect Babystepping against other ISRs 
Especialy against stepper ISR.
This is even more important when a minimum pulse width is set,
increasing the runtime of a babystep.
 2017-03-21 18:05:44 +01:00
Sebastianv650 80830919dc Add MINIMUM_STEPPER_PULSE ability to babystepping 2017-03-21 17:50:38 +01:00
rafaljot 6da949bbf0 Update Marlin_main.cpp 
Sometimes after killing heaters are still on.
 2017-03-21 15:06:01 +01:00
Roxy-3D 72f7b14e66 Make G29's Interactive Mesh Editor Work 2017-03-20 12:52:51 -05:00
Roxy-3D 3fd74b121f Get G29's Interactive Mesh Editor running 
G29 P4 R O  should work now.
 2017-03-20 12:52:51 -05:00
Roxy-3D 1d58558bec Spelling fix 2017-03-20 12:52:51 -05:00
Scott Lahteine 2573f4dd05 Merge pull request #6052 from thinkyhead/rc_lift_on_pause 
Add PARK_HEAD_ON_PAUSE feature / M125
 2017-03-20 03:36:31 -05:00
Scott Lahteine 48c6284c91 Immediate commands take precedence 2017-03-19 21:50:48 -05:00
Roxy-3D 76c270fdf2 Allow FWRETRACT with UBL Enabled 
The retraction flag in UBL's G26 was conflicting with the FWRETRACT option.

All fixed!
 2017-03-19 15:43:12 -06:00
Roxy-3D c377c59d47 Allow G29 P1 R to generate the mesh 
Fix the logic change that happened when UBL got merged.
 2017-03-19 15:13:33 -06:00
Scott Lahteine ff0dd162b7 PARK_HEAD_ON_PAUSE implementation 2017-03-19 07:27:35 -05:00
Scott Lahteine 26473cab6d Add PARK_HEAD_ON_PAUSE feature 2017-03-19 05:06:55 -05:00
Scott Lahteine 4cf51157b3 Use XYZE rather than NUM_AXIS 2017-03-19 01:14:39 -05:00
Scott Lahteine 4c7f14752a Add disable_e_steppers function 2017-03-19 01:14:39 -05:00
Scott Lahteine 8eb29f91e6 Patch filament change options and beep code 2017-03-19 01:14:39 -05:00
Scott Lahteine 56c9dfc83b Merge pull request #6066 from thinkyhead/rc_felix_fix 
Update Felix config for UBL
 2017-03-19 01:11:02 -05:00
Scott Lahteine 9b2b53f63a Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z 
Move Z last in tool-change for SWITCHING_EXTRUDER
 2017-03-19 00:34:41 -05:00
Scott Lahteine f98fb6b38e Update Felix config for UBL 2017-03-19 00:28:48 -05:00
Scott Lahteine 7cabe81373 Merge pull request #6057 from thinkyhead/rc_followup_6054 
Followup 6054 with some cleanup
 2017-03-18 13:49:20 -05:00
Scott Lahteine 4bca27ab89 Fix Kelvin conversion 
Thanks to @ospalh -- #6056
 2017-03-18 13:23:08 -05:00
Scott Lahteine 143ab8f329 Remove Roxy's personal configurations 2017-03-18 12:35:02 -05:00
Scott Lahteine 2512871a36 Patch configs UBL followup 2017-03-18 12:32:03 -05:00
Scott Lahteine 27b5666e15 Move Allen Key probe definition to the top 2017-03-18 12:27:37 -05:00
Scott Lahteine 77cf648ed3 Move menu selection past static items in 1 screen 2017-03-18 12:26:21 -05:00
Scott Lahteine 2c630a1b5c Merge pull request #6054 from thinkyhead/rc_ubl_renewal 
UBL for RCBugFix — cleanup, rebase, patch
 2017-03-18 12:07:57 -05:00
Scott Lahteine 0492a3a8f1 Merge pull request #6027 from Bob-the-Kuhn/add_kill_info 
Message for every KILL and STOP
 2017-03-18 11:49:35 -05:00
Scott Lahteine 6618346148 Patches to work around "register spill" compiler bug 2017-03-18 11:35:21 -05:00
Scott Lahteine be7dd90382 Add Thermistor 75: MGB18 silicon pad 2017-03-18 11:35:20 -05:00
Scott Lahteine b0a9c82c31 Fix single-char echo and pinMode usage 2017-03-18 11:35:20 -05:00
Scott Lahteine fb60aa3736 UBL implementation 2017-03-18 11:35:20 -05:00
Scott Lahteine 238b8fd2a3 UBL core and support files 2017-03-18 11:35:19 -05:00
Scott Lahteine cf94688925 Univeral Bed Leveling - configuration 2017-03-18 11:35:19 -05:00
Scott Lahteine 03aa424ccb Merge pull request #6053 from thinkyhead/rc_clean 
Remove extraneous whitespace
 2017-03-18 03:26:45 -05:00
Scott Lahteine af644871bf Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics 
Remove delta optimization concepts… for now
 2017-03-18 03:26:24 -05:00
Scott Lahteine 77491dd924 Remove extraneous whitespace 2017-03-18 03:17:39 -05:00
Scott Lahteine b865b21d32 Can't use Z fade height with DELTA 2017-03-17 08:34:47 -05:00
Scott Lahteine 1e57b0c269 Remove delta interpolation concept 2017-03-17 06:32:11 -05:00
Scott Lahteine e46898f8e5 Remove kinematic optimizations 2017-03-17 06:30:22 -05:00
Scott Lahteine 11f1fdfab4 _lcd_level_bed_position => manual_probe_index 2017-03-17 06:05:17 -05:00
Scott Lahteine 0e410c9dfd Software endstop options as simple switches 2017-03-17 06:05:17 -05:00
Scott Lahteine d01b915085 Implement soft_endstops_enabled for clamping 2017-03-17 06:05:17 -05:00
Scott Lahteine e4649c9044 Add HAS_SOFTWARE_ENDSTOPS macro 2017-03-17 06:05:17 -05:00
Scott Lahteine 3e927ff204 Replace MBL Z hacking 2017-03-17 06:05:17 -05:00
Scott Lahteine 4e53124681 Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper 
M114 - wait for move completion before reporting position
 2017-03-17 05:22:46 -05:00
Scott Lahteine 734f9ea133 Merge pull request #6040 from thinkyhead/rc_sanity_use_assert 
Simplify some sanity checks with static_assert
 2017-03-17 05:22:17 -05:00
Scott Lahteine f02af83d42 Remove some extraneous spaces 2017-03-16 23:59:11 -05:00
Scott Lahteine 672e45652e Improved solution to tool-change bug 2017-03-16 23:59:10 -05:00
Scott Lahteine 23f1cfb46f Fix stuck CHDK pin as suggested in #6041 2017-03-16 21:49:39 -05:00
Scott Lahteine 0b22069e82 Merge pull request #6021 from Bob-the-Kuhn/BUG-FIX--Switching-extruder-tool-change-Z-height 
Bug Fix: Switching extruder tool change leaves Z in wrong position
 2017-03-16 21:15:20 -05:00
Scott Lahteine e7e4500629 Simplify some sanity checks with static_assert 2017-03-16 16:31:34 -05:00
Bob-the-Kuhn 34ff0c3439 M114 - wait for move completion before reporting position 2017-03-16 15:10:45 -05:00
Bob-the-Kuhn b31604a492 Message for every KILL and STOP 
No more mystery halts & resets

Moved messages to language.h

Added current command to inactive timeout message
 2017-03-15 21:05:11 -05:00
Kai 13b44d019b Update language_de.h 
Addition of missing strings to match language_en.h
 2017-03-15 16:06:52 +01:00
Bob-the-Kuhn 685ed5393a Bug Fix: Switching extruder tool change leaves Z in wrong position 
The tool_change function saves the current_position to the destination
array soon after starting.  Later in the switching extruder section, the
destination array is modified when moving the Z axis up & down.  A later
section of tool_change moves the head back to the “original location”
using the destination array.  This later section assumes that the
destination array hasn’t been modified.

The fix is to save the destination Z position and then restore it after
the Z movements have completed.

Going back to using the current_position array for the switching
extruder Z axis moves (and  leaving the destination array untouched)
doesn’t fix the problem.

This bug was introduced by the “Make tool_change kinematic compatible”
commit # 847429eff4 which was merged on 10
Oct 2016 as part of PR 4982.

This bug was discovered in Issue 5966.
 2017-03-14 02:36:24 -05:00
Scott Lahteine 51353f8fea Merge pull request #6000 from trivalik/NoWorkspaceWarning 
prevent warning with define of NO_WORKSPACE_OFFSETS
 2017-03-12 00:00:51 -06:00
MagoKimbra a4a9bd8bc9 Fix BUG set_position_mm 
Set postion must have axis and not E_AXIS + active_extruder.
 2017-03-11 14:13:39 +01:00
Trivalik 71ac6f9d42 prevent warning with define of NO_WORKSPACE_OFFSETS 2017-03-09 23:49:57 +01:00
Stefan Brüns 9ba6c051a1 Makefile: add nozzle.cpp too CXXSRC list 
The file is required by the optional NOZZLE_PARK_FEATURE.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-09 03:08:49 +01:00
Stefan Brüns 9cc8d495b8 Makefile: remove no longer existing search paths 
ArduinoAddons has been removed from Marlin, remove any references to it.
Replace HARDWARE_SRC and HARDWARE_DIR with its expanded equivalents.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-09 01:46:47 +01:00
Stefan Brüns bf563e62c1 Makefile: add printcounter.cpp too CXXSRC list 
The file is required by the optional PRINTCOUNTER feature.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-09 01:45:54 +01:00
Stefan Brüns ddecc1441d Makefile: Fix linker error 
Instantiation of the static singleton instance thermalManager in general
requires locking, but we know its safe to do without.

Add -fno-threadsafe-statics to avoid using locking primitives, which
result in linking errors:
	undefined reference to `__cxa_guard_acquire'
	undefined reference to `__cxa_guard_release'

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-09 01:45:38 +01:00
MagoKimbra 37a26dfc09 Fix delta_angles 2017-03-08 09:23:30 +01:00
Scott Lahteine 2defb1d748 Use SET_INPUT_PULLUP where appropriate 2017-03-07 23:43:33 -06:00
Scott Lahteine 58b3e98878 Use arrays for delta tower parameters 2017-03-07 19:00:22 -06:00
Scott Lahteine 47242a40bb Apply updated changes for delta_tower_angle_trim 2017-03-07 18:15:11 -06:00
Jimmy Envall 00b6b3da79 Added support for delta tower angle corrections. 2017-03-07 16:35:58 -06:00
Scott Lahteine 5a456c832a Apply TMC2130 to example configurations 2017-03-07 04:22:06 -06:00
Scott Lahteine 45f949d833 TMC2130 Library: @teemuatlut replaces @makertum 2017-03-07 04:22:06 -06:00
Scott Lahteine 33f8a8a344 Merge pull request #5973 from thinkyhead/rc_circle_pattern 
Add circle pattern to nozzle clean
 2017-03-06 04:47:01 -06:00
Scott Lahteine 94b3e0a483 Merge pull request #5959 from benlye/benlye-fixm48 
Remove extra carriage return in M48 V1 output
 2017-03-06 04:24:28 -06:00
Scott Lahteine a9a1971295 Merge pull request #5972 from thinkyhead/rc_cooldown_before 
Fix preheat menu formatting
 2017-03-06 03:21:29 -06:00
Scott Lahteine 6aa81255a9 Patch and clean up "flsun" kossel. Followup to #5911. 2017-03-06 03:15:00 -06:00
Scott Lahteine b2270b3f3e Apply prior nozzle clean update 2017-03-06 03:14:59 -06:00
Marek Pikuła 7698c5617a Added circle nozzle cleaning parameters to example configurations 2017-03-06 03:04:58 -06:00
Marek Pikuła 6836b94eea Added circle pattern for nozzle cleaning feature 2017-03-06 03:03:00 -06:00
Scott Lahteine 3b75518ef6 Merge pull request #5911 from aphex3k/flsun_kossel_mini 
Configuration.h and Configuration_adv.h for the kossel mini by flsun
 2017-03-06 02:26:01 -06:00
Scott Lahteine 3830778852 Apply NO_WORKSPACE_OFFSETS to lcd menu 2017-03-06 02:21:42 -06:00
Scott Lahteine 7e3aab889d Fix preheat menu formatting 2017-03-06 02:07:07 -06:00
Scott Lahteine fea0d3f20f Endstop and temp-isr general cleanup 2017-03-06 02:07:07 -06:00
Scott Lahteine aef08e8780 Compact some macro substitutions 2017-03-06 02:07:07 -06:00
Scott Lahteine 2f620f86d9 Merge pull request #5970 from thinkyhead/rc_cooldown_before 
Preheat Hotend Only menu items
 2017-03-06 01:56:05 -06:00
Scott Lahteine 02de8e6f18 Merge pull request #5957 from MagoKimbra/rc_stepper_indirection_fix 
Stepper indirection fix tmc driver
 2017-03-06 01:16:40 -06:00
Scott Lahteine 6c5312559c Menu item to preheat only the hotend 2017-03-06 01:14:54 -06:00
Scott Lahteine 9d0142e8ae Move Change Filament above Cooldown 2017-03-06 01:13:12 -06:00
Scott Lahteine 0c55095c5e Move Cooldown above Preheat 2017-03-06 01:13:12 -06:00
Scott Lahteine c15c65f18a Merge pull request #5971 from thinkyhead/rc_fix_e_factors 
Patch DISTINCT_E_FACTORS bug
 2017-03-06 01:11:17 -06:00
Scott Lahteine bfb0007573 Patch DISTINCT_E_FACTORS bug 2017-03-05 23:19:31 -06:00
Scott Lahteine be98016674 Merge pull request #5963 from thinkyhead/rc_no_offsets_optim 
New option: NO_WORKSPACE_OFFSETS
 2017-03-05 21:46:49 -06:00
Scott Lahteine 8e89a802f7 Document PROTOCOL_VERSION 2017-03-05 04:43:46 -06:00
Scott Lahteine 87b03b16bd Use a macro for array copies 2017-03-05 04:43:46 -06:00
Scott Lahteine e141f3a03f Optimize coordinate transformation 
Pre-compute the combined position shift and home offset to save a
single float fetch-and-add per conversion. Great for delta/scara and
bed leveling.
 2017-03-05 04:43:16 -06:00
Scott Lahteine 5f7e85398b Implement NO_WORKSPACE_OFFSETS 2017-03-05 04:43:15 -06:00
Scott Lahteine 05abe853f9 New option: NO_WORKSPACE_OFFSETS 2017-03-05 04:43:15 -06:00
Scott Lahteine 20addc6e32 Merge pull request #5955 from thinkyhead/rc_eeprom_fail_better 
Display a message for EEPROM version mismatch
 2017-03-04 17:15:07 -06:00
benlye dead89062a Update Marlin_main.cpp 
Remove unnecessary line break from M48 V1 output.
 2017-03-04 17:58:10 +00:00
MagoKimbra ae277aebc6 Stepper indirection fix tmc driver 2017-03-04 12:17:39 +01:00
Scott Lahteine 8f4e4b1995 Display a message for EEPROM version mismatch 2017-03-04 01:20:36 -06:00
Scott Lahteine 177ad245f6 Merge pull request #5953 from thinkyhead/fix_fc_e_index 
Fix submenu hotend status display
 2017-03-04 00:12:29 -06:00
Scott Lahteine cea3ea772c Fix submenu hotend status display 2017-03-03 22:12:22 -06:00
Scott Lahteine b27f69ba51 Merge pull request #5813 from thinkyhead/rc_fix_makrpanel 
Fix MAKRPANEL assignments
 2017-03-03 21:40:49 -06:00
Scott Lahteine 1ef6ccd919 Merge pull request #5951 from thinkyhead/rc_print_2d_array 
Reduce code size (40b, or 166b with bilinear subdivision)
 2017-03-03 21:27:44 -06:00
Scott Lahteine 53f5086905 Fix MAKRPANEL assignments 
MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within
that block.
 2017-03-03 21:22:21 -06:00
Scott Lahteine 98c7b682ca General cleanup, const usage, var naming 2017-03-03 20:57:49 -06:00
jes 369bfc8a1e Reduce code size (40b, or 166b with bilinear subdivision) 2017-03-03 20:36:32 -06:00
Scott Lahteine 0d13412105 Fix "Heating..." message 2017-03-03 12:12:51 -06:00
Scott Lahteine 5065636023 Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio 
LIN_ADVANCE: Fixed E/D ratio option
 2017-03-03 03:24:41 -06:00
divendres 75ad82baab Update Catalan language 2017-03-02 20:40:06 -06:00
Scott Lahteine 34253497d4 Babysteps code tweak 
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
 2017-03-02 20:35:45 -06:00
Scott Lahteine fb4aead2b1 Clean up and finish #5887 2017-03-02 20:16:29 -06:00
Scott Lahteine b3e2bd6f29 Reduce E_D_ratio code 2017-03-02 01:00:37 -06:00
Sebastianv650 de6c40ed8f Add option to fix E/D ratio 
Work around for slicers producing buggy gcode.
 2017-03-02 01:00:37 -06:00
Scott Lahteine eeb490221f Remove BEEPER_PIN override in pins_RIGIDBOARD.h 
Resolves #5926. This override is no longer needed since the RAMPS LCD controller pins were fixed.
 2017-03-01 18:26:29 -06:00
Roxy-3D 11e892bd84 Merge pull request #5887 from Roxy-3D/RCBugFix 
Double Click of Encoder Wheel Jumps to Z-BabyStepping
 2017-03-01 17:15:02 -07:00
Scott Lahteine cbeff12f8a Merge pull request #5933 from teemuatlut/lcd_days_hours 
Fix formatting of SD print time hours above one day
 2017-03-01 15:44:10 -06:00
Scott Lahteine 8a4e9d08a3 Merge pull request #5931 from thinkyhead/rc_core_endstop_fix 
Fix CoreYX / YZ / ZX endstop logic
 2017-03-01 15:32:11 -06:00
teemuatlut 9175d16660 Fix formatting of print time hours above one day 2017-03-01 18:55:25 +02:00
Scott Lahteine b6d9eb229f Extend Core endstop commentary 2017-03-01 10:01:50 -06:00
Bob-the-Kuhn c5e08e8761 CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ 
In the endstop testing section, add the "reverse" logic in addition to "normal" core handling.

In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement.

In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X.

----

Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.
 2017-03-01 09:40:24 -06:00
Scott Lahteine c759c26cca Make LCD_TIMEOUT_TO_STATUS configurable 
As suggested in
https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059
065
 2017-02-28 19:02:50 -06:00
Michael Henke 47729918fc
enable ENSURE_SMOOTH_MOVES 2017-02-27 20:42:49 -08:00
Michael Henke 330b981912 created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun 2017-02-25 21:31:37 -08:00
Colin Gilgenbach 48b7e0f8d8 Nozzle Wipe Vertical Zig-Zag 
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
 2017-02-25 21:52:43 -06:00
Scott Lahteine f17b81b765 Add MAPPER_C2C3 to French language 2017-02-25 18:49:00 -06:00
Roxy-3D 7e607b06eb Better comments on DOUBLE_CLICK_TIME_WINDOW 2017-02-23 13:13:57 -07:00
Scott Lahteine 34cba42104 Use PSTR for MSG_HEATING 2017-02-22 11:30:19 -06:00
Roxy-3D 584d147a02 fixup the indentation 2017-02-22 07:23:54 -07:00
Roxy-3D e443e0e2a9 Fix scoping issues for double click to Z-Babystepping 2017-02-21 18:15:28 -07:00
Roxy-3D 17d1cd7c09 Double Click of Encoder Wheel Jumps to Z-BabyStepping 2017-02-21 18:08:19 -07:00
Roxy-3D 48d862377a Double Click of Encoder Wheel Jumps to Z-BabyStepping 2017-02-21 18:04:31 -07:00
Scott Lahteine cfdc189796 Merge pull request #5856 from thinkyhead/rc_fix_bad_comment 
Remove non-applicable comment on MANUAL_Z_HOME_POS
 2017-02-20 17:54:30 -06:00
dot-bob cd68380ce6 Add status_printf to print messages to the lcd status line. 
Also add a hotend indicator to the heating message displayed on the lcd status line.
 2017-02-20 15:26:54 -06:00
Scott Lahteine 012aff6823 Merge pull request #5862 from thinkyhead/rc_fix_a_thing 
Finish reducing of ABL_BILINEAR_SUBDIVISION
 2017-02-18 21:36:28 -06:00
Scott Lahteine b9187020c4 Finish reducing of ABL_BILINEAR_SUBDIVISION 2017-02-18 20:01:19 -06:00
Scott Lahteine e282b72151 Remove non-applicable comment on MANUAL_Z_HOME_POS 2017-02-18 05:14:43 -06:00
Scott Lahteine 57f92a4632 Apply DISTINCT_E_FACTORS to sync_from_steppers 
Followup to #5840
 2017-02-18 04:36:41 -06:00
Scott Lahteine 4da8b1494b Merge pull request #5854 from thinkyhead/rc_fixup_m600 
M600 cleanup and bugfix
 2017-02-18 04:27:13 -06:00
Scott Lahteine dd02dba6e6 Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm 
Fix steps_to_mm for active extruders
 2017-02-18 04:25:53 -06:00
Scott Lahteine 6e0b3fcc08 Optimize M600 heater status LCD items 2017-02-18 04:08:00 -06:00
Scott Lahteine 44b4e116bd Commentary / style in gcode_M600 2017-02-18 04:08:00 -06:00
Scott Lahteine 561904345f Tweak config ordering for M600 2017-02-18 00:01:31 -06:00
Scott Lahteine 284d6de9da Remove some old code comments 2017-02-17 15:25:56 -06:00
MagoKimbra 3685224c1a Fix steps_to_mm for active extruders 2017-02-15 21:45:39 +01:00
Scott Lahteine 4578c573fe Pause the print job timer while in M600 2017-02-15 05:29:34 -06:00
Scott Lahteine bfe6f71794 Simplify filament_change_beep function 2017-02-15 05:29:34 -06:00
Scott Lahteine 8289ea1316 Use a short name for the filament "endstop" 2017-02-15 05:29:34 -06:00
Scott Lahteine d9dcef8a87 Spacing, coding standards 2017-02-15 05:29:34 -06:00
Scott Lahteine 931914e679 Apply M600 updates to all configs 2017-02-15 05:29:34 -06:00
Roxy-3D 8bf0b496b9 Improve M600 with timeout, wait for heatup. 2017-02-15 05:29:34 -06:00
Tannoo c40fe2113c Fix for broken MBL 
LCD call was waiting forever, causing the system to hang.
 2017-02-15 04:39:22 -06:00
Scott Lahteine 4d4745c0eb Parenthesize some menu defines for safety 2017-02-14 23:12:27 -06:00
Scott Lahteine 47f9883b0f Dynamic allocation for SDCARD_SORT_ALPHA 2017-02-14 21:37:25 -06:00
Scott Lahteine a561bd5e3a New feature: SDCARD_SORT_ALPHA 2017-02-14 21:37:24 -06:00
Scott Lahteine c04d6b5aa6 Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry 
Combine fixes for LIN_ADVANCE and temperature ISR
 2017-02-14 20:36:58 -06:00
Scott Lahteine 467f01435f Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce 
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
 2017-02-14 08:41:44 -06:00
Scott Lahteine 97b6fb6381 Reduce / optimize LIN_ADVANCE code 2017-02-14 07:52:03 -06:00
Sebastianv650 271ced7341 Prevent re-entering of temperature ISR 
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
 2017-02-14 07:52:03 -06:00
Sebastianv650 1b59766fcb Cleanup position_float 
Hopefully fixes Marlin #5481
 2017-02-12 13:09:06 +01:00
Scott Lahteine a950c31e2d Merge pull request #5815 from thinkyhead/rc_pulses_per_step 
Give encoder pulse/steps conditionals their own block
 2017-02-12 04:14:00 -06:00
Scott Lahteine 7176de8605 Merge pull request #5814 from thinkyhead/hotend_loop_always 
Make HOTEND_LOOP more consistent, let compiler optimize it
 2017-02-12 04:13:14 -06:00
Scott Lahteine adec219ca5 Merge pull request #5811 from thinkyhead/fix_two_strings 
No space after X: or A: in M114 output
 2017-02-12 04:11:51 -06:00
jes eaa829b58c Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly 2017-02-12 04:09:48 -06:00
Scott Lahteine 1c99ca82d8 Give encoder pulse/steps conditionals their own block 2017-02-12 03:57:57 -06:00
Scott Lahteine e44294bb4d Make HOTEND_LOOP more consistent, let compiler optimize it 2017-02-12 02:50:38 -06:00
Scott Lahteine 701f4a6d9d Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection 
guaranteed BLTouch detection
 2017-02-12 01:13:35 -06:00
Scott Lahteine c15b9a6a06 No space after X: or A: in M114 output 2017-02-12 00:10:03 -06:00
Scott Lahteine e1702816f6 Fix SD_CHECK_AND_RETRY condition 
Addressing #5806
 2017-02-11 23:55:56 -06:00
Scott Lahteine 1bc5be3bdf Cast DELTA_PRINTABLE_RADIUS to float in sq() 
Addressing #5625
 2017-02-11 23:28:39 -06:00
Bob-the-Kuhn 0369f97ec1 guaranteed BLTouch detection 
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.

At 200 steps per mm, my system has problems  below a feedrate of 120 mm
per minute.

Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR.  If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero.  This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.

2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS.  The "extra" ISR runs only check the
endstops.  This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.

=========================================

BLTouch error state recovery

If BLTouch already active when deploying the probe then try to reset it
& clear the probe.

If that doesn't fix it then declare an error.

Also added BLTouch init routine to startup section
 2017-02-11 12:01:34 -06:00
Scott Lahteine 1e4d4e5915 Fix typo in language_uk 
Thanks to @pavlus for this one
 2017-02-10 15:34:31 -06:00
Scott Lahteine 7fe7a0c8be Merge pull request #5793 from thinkyhead/rc_adjust_probe_output 
Adjust probe_pt() terminal output to respect probe z-offset
 2017-02-09 23:05:02 -06:00
Scott Lahteine 633c253bc1 Merge pull request #5792 from thinkyhead/rc_default_dac_vals 
Default DAC values for RigidBoard V2
 2017-02-09 22:56:03 -06:00
Florian Heilmann 7bbc31704c Adjust probe_pt() terminal output to respect probe z-offset 2017-02-09 22:54:22 -06:00
Scott Lahteine a245656db3 Merge pull request #5713 from gege2b/RCBF-French 
French translation : Added missing strings as well as missing accents
 2017-02-09 22:43:56 -06:00
jaysonkelly 713931338a Default DAC values for RigidBoard V2 2017-02-09 22:39:00 -06:00
Bob-the-Kuhn ae706233a8 pinsDebug for 644/1284 & USB646/1286 families 
added conditional compilation for PWMs 1C & 3C

add Teensyduino compatibility

==========================================

changes per review - minor formatting changes

1) remove non-printable character at the end of line 687

2) split a really long comment into two lines

3) got rid of some trailing spaces

============================================

Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.

The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
 2017-02-09 07:24:02 -06:00
Gege2B 22dfcc9a71 French translation : Added missing strings as well as missing accents 2017-01-17 23:29:23 +01:00
Scott Lahteine 9b5515926a Merge pull request #5696 from thinkyhead/rc_volumetric_default 
Allow enabling volumetric filament on config load
 2017-01-14 05:48:51 -08:00
Robert Kirk 0d147ead66 Allow enabling volumetric filament on config load 2017-01-14 04:37:49 -08:00
AnHardt fa26767efe Replace all remaining 'boolean' with 'bool' 2017-01-13 13:03:52 +01:00
AnHardt f6858d9974 Fix M110 without leading N 
Store N in the right variable.
This is too rarely used.

"mea culpa, mea culpa, mea maxima culpa"
 2017-01-13 12:33:50 +01:00
Scott Lahteine 0c0c840ba8 Merge pull request #5683 from emartinez167/EMartinez-Changes 
Updates to some incorrectly ended strings in the Spanish translation
 2017-01-12 07:49:15 -08:00
Kai 25dae3bccc Update language_de.h 
Small corrections
 2017-01-12 16:06:58 +01:00
emartinez167 7292145f4e Fix for some wrong strings 
On last commit, some strings were ended with the incorrect character.
This fixes it.
 2017-01-12 22:35:04 +08:00
Scott Lahteine 93a9aa6b76 Merge pull request #5682 from thinkyhead/rc_spanish_jan 
Updates to Spanish language
 2017-01-12 06:14:10 -08:00
Scott Lahteine 7a9c1a279b Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop 
Reset watchdog in SD init to prevent reboot
 2017-01-12 06:13:56 -08:00
Scott Lahteine e409c7f9e8 Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds 
From "microseconds" to "milliseconds"
 2017-01-12 06:02:55 -08:00
emartinez167 020c6af7b0 Updates to Spanish language 
Add missing Spanish language definitions.
 2017-01-12 05:53:39 -08:00
Hans Raaf d29cc8f7bc Reset watchdog in SD init to prevent reboot 
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
 2017-01-12 05:33:38 -08:00
Scott Lahteine 7743849608 Merge pull request #5680 from thinkyhead/rc_configs_puhlease 
code_value_float tweak
 2017-01-12 05:22:47 -08:00
Scott Lahteine 16357fbfdf Merge pull request #5619 from Ocarthon/RCBugFix 
Disable SD Detect for K8400
 2017-01-12 05:22:03 -08:00
Scott Lahteine e57c0fce66 Move MOSFET changes above #include for RIGIDBOARD 
Correction to #5629
 2017-01-12 04:46:49 -08:00
Scott Lahteine c376f6a2cb code_value_float tweak 2017-01-12 04:38:09 -08:00
Scott Lahteine fb3c30e24c Fix lcd_wait_for_homing causing menu to block 
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
 2017-01-12 04:37:23 -08:00
Scott Lahteine f8ae0fd29f Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix 
Fix empty Prepare menu
 2017-01-12 04:20:18 -08:00
Robert Kirk aab5118c6a Remove error causing break command 
Use index macro instead of e
 2017-01-01 17:47:01 -05:00
esenapaj d38e335272 From "microseconds" to "milliseconds" 
delay() is milliseconds
 2017-01-02 01:19:33 +09:00
Philip Standt 8ae2bc7e2e Disable SD Detect for K8400 2016-12-28 23:21:18 +01:00
Scott Lahteine 4061fca1ad Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT 2016-12-23 19:55:12 -08:00
Scott Lahteine 5ab7b91615 Comment on filament runout sensor config 2016-12-23 19:50:27 -08:00
Scott Lahteine 922c67f17d Merge pull request #5588 from thinkyhead/rc_remove_biv25 
Drop biv2.5 delta configurations
 2016-12-23 19:14:50 -08:00
Scott Lahteine 8c6c048551 drop biv2.5 delta configurations 2016-12-23 18:56:07 -08:00
Scott Lahteine 92dbeebf40 Define ADV_NEVER, ADV_RATE 2016-12-23 18:43:23 -08:00
Robert Kirk 306c184b1a Allow M600 when dryrun debugging 2016-12-21 20:30:51 -05:00
Scott Lahteine fe2ea2906f Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr 
LIN_ADVANCE with unified stepper ISR
 2016-12-21 02:53:32 -08:00
Sebastianv650 84c685f8b5 First draft of Unified Stepper / E Advance ISR 2016-12-21 01:34:39 -08:00
Scott Lahteine 83021d82c6 Merge pull request #5502 from AnHardt/symbol-strings 
Add symbol-strings
 2016-12-21 00:51:59 -08:00
Scott Lahteine 036eccfd6e Merge pull request #5572 from Kaibob2/patch-5 
Update language_de.h
 2016-12-21 00:50:40 -08:00
Scott Lahteine b794b76836 Merge pull request #5567 from AnHardt/fix5194 
Fix 5194
 2016-12-21 00:49:52 -08:00
Scott Lahteine 451ba5df01 Merge pull request #5516 from esenapaj/Suppress-warning 
Suppress warning
 2016-12-21 00:00:35 -08:00
Scott Lahteine 92dbc63949 Merge pull request #5571 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-12-20 23:59:55 -08:00
Kai ade72535c4 Update language_de.h 
Added tarnslation for
```
#define MSG_DEBUG_MENU 
#define MSG_PROGRESS_BAR_TEST
```
 2016-12-21 08:57:39 +01:00
esenapaj ab6b005867 Suppress warning 2016-12-21 09:13:03 +09:00
AnHardt 61f15ef7e7 Fix 5194 
I have been a bit too radical in cleaning up this section.
 2016-12-21 00:45:29 +01:00
esenapaj 60515ff700 Update Japanese translation 
・Add new translation
 2016-12-21 08:44:07 +09:00
Scott Lahteine 1e419655f3 Followup to #5550 - spacing before "mm" 2016-12-20 02:27:54 -08:00
Scott Lahteine 1a26ce1cdc Merge pull request #5550 from FHeilmann/patch-2 
Allow negative retract values in the LCD
 2016-12-20 02:10:22 -08:00
Scott Lahteine bec30c89e7 Merge pull request #5522 from esenapaj/Add-description-for-dual-x 
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
 2016-12-20 01:31:53 -08:00
Scott Lahteine 7739c0affa Change "+mm" to "mm" in most languages 
- Japanese and Chinese still need update
 2016-12-20 01:16:51 -08:00
Scott Lahteine 1cba425308 Allow negative recover-swap length from LCD 2016-12-20 01:16:08 -08:00
Scott Lahteine 298a8c6a3c Merge pull request #5561 from thinkyhead/rc_no_case_light 
Support for M335 case light "no case light"
 2016-12-20 01:06:59 -08:00
Scott Lahteine 644f45cbd8 Merge pull request #5563 from akaJes/m600 
FILAMENT_CHANGE_FEATURE allowed in idle mode
 2016-12-20 01:06:10 -08:00
Scott Lahteine 0d2fc13516 Place "Level Bed" closer to "Auto Home" 2016-12-20 00:51:03 -08:00
Scott Lahteine b031d28ebf Encoder events should not skip stripes 2016-12-20 00:21:51 -08:00
Scott Lahteine 22881f38b9 Fix updating of "bool" menu items 2016-12-20 00:21:51 -08:00
Scott Lahteine eb68715b94 No "Cooldown" menu if heaters are off 2016-12-20 00:21:51 -08:00
Jesus 4ed976b5ff m600 fixes 2016-12-20 09:47:46 +02:00
Damien 4e2639942b Support for M335 case light "no case light" 2016-12-19 23:23:08 -08:00
Scott Lahteine 18ba31e9b5 Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example 2016-12-19 22:57:14 -08:00
Scott Lahteine 03af5961b0 Hide (or remove) custom character change on boot screen 2016-12-19 22:27:28 -08:00
Scott Lahteine 1642f5ed31 Add macro to some en strings 2016-12-19 22:27:28 -08:00
Scott Lahteine dbb2d56c89 Correct comment on watchdog timer 2016-12-19 22:27:28 -08:00
Scott Lahteine 41a30923f3 Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version 
Throw an error for gcc before 4.7
 2016-12-19 19:50:44 -08:00
Scott Lahteine 6d6a1db6ec Apply const to _EEPROM_writeData value param 2016-12-19 18:50:43 -08:00
Robert Kirk f724ef5820 Have bed leveling status output current status, not requested. 2016-12-19 18:47:45 -08:00
Scott Lahteine 20218e553d Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size 
Fix size
 2016-12-19 18:47:28 -08:00
Scott Lahteine dcfbe2bd3c Throw an error for gcc before 4.7 2016-12-19 18:30:51 -08:00
Scott Lahteine 82fde7df2e Merge pull request #5512 from AnHardt/speed-compare-bbr 
Optimize handling of block_buffer_runtime()
 2016-12-19 18:21:06 -08:00
Scott Lahteine 8986225752 Spacing, cleanup in speed_lookuptable.h 2016-12-19 14:52:45 -08:00
Scott Lahteine e12c8e5cac Split up thermistor tables 2016-12-19 14:47:54 -08:00
Florian Heilmann a7334fd2a0 Allow negative retract values in the LCD 
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
 2016-12-19 14:19:06 +01:00
AnHardt 292eb365c6 Optimize handling of block_buffer_runtime() 
millis_t is long - divisions take for ever.

Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)

That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
 2016-12-19 11:47:28 +01:00
esenapaj 6854f44bf2 Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE 2016-12-19 02:21:10 +09:00
Scott Lahteine 3f6f036f7c Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup 
Report EEPROM data size, not final index
 2016-12-16 18:55:48 -08:00
MagoKimbra 86ba7e4542 Fix size 
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
 2016-12-16 14:49:33 +01:00
Scott Lahteine f9f75c8016 Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to 2016-12-15 23:15:38 -08:00
Scott Lahteine 87921f390a Clarify what are "logical" positions in the planner 2016-12-15 23:15:38 -08:00
Scott Lahteine a4f10f59c3 Write the E parameter length correctly 2016-12-15 23:15:38 -08:00
Scott Lahteine 2e904cb4f9 Merge pull request #5514 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-12-15 21:38:40 -08:00
Scott Lahteine 0b6817e0f9 Merge pull request #5505 from android444/patch-4 
Update for translations language_pl.h
 2016-12-15 21:38:18 -08:00
Scott Lahteine 3bd76f60e4 Report EEPROM data size, not final index 2016-12-15 20:26:28 -08:00
Scott Lahteine 78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh 
Save Bed Leveling to EEPROM
 2016-12-15 20:23:01 -08:00
Scott Lahteine 0d0aa6c20d Patch type for max_acceleration_mm_per_s2 save/restore 2016-12-15 20:05:42 -08:00
Scott Lahteine d4f5418802 Merge pull request #5517 from esenapaj/Fix-for-PR-#5255 
Fix for the PR #5255 (Case light menu (3rd attempt))
 2016-12-15 20:01:22 -08:00
Scott Lahteine fa7010b0a1 Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces 
Remove unnecessary tabs and spaces
 2016-12-15 19:58:32 -08:00
Scott Lahteine 6d7b1cdf6c Add M421 for ABL Bilinear 2016-12-15 19:39:11 -08:00
Scott Lahteine 32e65dc429 Extend M420 to print state and, with V, the matrix / mesh 2016-12-15 19:39:11 -08:00
Scott Lahteine d04258753b Don't throw away the bed level matrix on G28 2016-12-15 19:21:18 -08:00
Scott Lahteine 8f0f225d10 Save ABL Planar Matrix to EEPROM 2016-12-15 19:21:15 -08:00
Scott Lahteine e2429a9da1 Generalize Bed Leveling flag in EEPROM 2016-12-15 19:20:52 -08:00
Scott Lahteine e42fd7813a Save ABL Bilinear Grid to EEPROM 2016-12-15 19:20:48 -08:00
Scott Lahteine 492b68f8e3 Better EEPROM read/write error handling 2016-12-15 19:08:44 -08:00
Scott Lahteine 55722c09da Use "UNPROBED" for un-probed bed_level_grid points 2016-12-15 19:08:44 -08:00
Scott Lahteine 2643404ac8 Throw an error in M420 if can't enable 2016-12-15 19:08:43 -08:00
Scott Lahteine b1539394fd Use planner.unapply_leveling to undo tilt in G29 2016-12-15 19:08:43 -08:00
Scott Lahteine 04636f78eb Re-enable MBL/ABL after M48 2016-12-15 19:08:43 -08:00
Scott Lahteine 9b41638672 Minor tweak to G29 grid points 2016-12-15 19:08:42 -08:00
Scott Lahteine daa2cad21f Fix comment on G29 to include 'Z' 2016-12-15 19:08:42 -08:00
Scott Lahteine 8244fefcc2 Tweak call to reset_bed_level in G29 2016-12-15 19:08:42 -08:00
Scott Lahteine 0995a5d734 Fixup reset_bed_level 2016-12-15 19:08:42 -08:00
Scott Lahteine 1b2fb2bdc7 ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_* 2016-12-15 19:08:41 -08:00
esenapaj d486361c69 Fix for commented section of Config_RetrieveSettings() 2016-12-16 04:34:47 +09:00
esenapaj 88157ba529 Fix for the PR #5255 (Case light menu (3rd attempt)) 2016-12-16 00:57:32 +09:00
esenapaj 069c6b38dd Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
esenapaj 9c8116aedf Update Japanese translation 
・Add new translation
 2016-12-16 00:06:58 +09:00
AnHardt 57b1275cde Add symbol-string to _de 
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
 2016-12-15 14:37:18 +01:00
android444 3363d2c937 Update for translations language_pl.h 2016-12-14 17:32:33 +01:00
Scott Lahteine 06af3b62ba Move HOLLOW_FRAME options to config_adv 2016-12-14 04:31:27 -08:00
Scott Lahteine 67ca6c7bfe Codestyle tweaks to ultralcd.cpp 2016-12-14 04:20:33 -08:00
Scott Lahteine 8d9fcd8e6f Merge pull request #5495 from AnHardt/autoadjusting_display-updates 
Adaptive screen updates for all kinds of displays
 2016-12-14 04:16:26 -08:00
Scott Lahteine 77a360912d Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers 
UTF-8 language header files
 2016-12-14 02:23:09 -08:00
AnHardt d0e24e0876 Adaptive screen updates for all kinds of displays 
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
 2016-12-13 18:44:34 +01:00
yhfudev 2dbd38ce16 tag the utf-8 strings 2016-12-13 11:54:35 -05:00
Scott Lahteine 94ffb58da7 Prevent retract un-hop at wrong height 2016-12-13 08:24:12 -08:00
Scott Lahteine 0772c8e55f Merge pull request #5487 from thinkyhead/rc_easier_move_axis 
Rearrange Move Menu, Fix up Delta Calibration
 2016-12-13 07:07:05 -08:00
Scott Lahteine b2c8de856b Merge pull request #5478 from AnHardt/stepspermm 
Replace ftostr62sign with ftostr62rj
 2016-12-13 07:05:42 -08:00
Scott Lahteine 1fd8185d37 Merge pull request #5492 from thinkyhead/rc_fix_language_es 
Fix multiple definitions of message macros in the language-es.h
 2016-12-13 06:57:52 -08:00
yhfudev 1cdffdede7 fix multiple definitions of message macros in the language-es.h 2016-12-13 06:48:38 -08:00
Scott Lahteine b67f8cb499 Merge pull request #5490 from jbrazio/update-bqhp2 
Update the bq Hephestos 2 example configuration
 2016-12-13 05:04:24 -08:00
Scott Lahteine 93b2833347 Move Menu: Select axis first, resolution after 2016-12-13 03:11:14 -08:00
Scott Lahteine 48aa0f6475 Merge pull request #5475 from AnHardt/utf-mapper-tr 
utf8-mapper for Turkish
 2016-12-13 03:03:22 -08:00
Scott Lahteine b9ee0d7bd3 Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn 
Patch fade_factor compiler warning
 2016-12-13 03:00:47 -08:00
Scott Lahteine 641e0936d4 Patch up Delta Calibration Menu 2016-12-13 02:42:28 -08:00
Scott Lahteine b4dbf4d18a Non-reentrant "Moving..." screen to safely wait in LCD 2016-12-13 02:42:27 -08:00
Scott Lahteine 7b625e0048 Patch fade_factor compiler warning 2016-12-13 02:29:01 -08:00
Scott Lahteine 6fa8fd15e2 Add negative temperatures for Thermistor 1 
Changes from #5485 by @AndKe
 2016-12-13 02:06:16 -08:00
Scott Lahteine 2b5d424394 Use handle_reprapworld_keypad for keypad handling 2016-12-13 01:41:08 -08:00
Scott Lahteine 887ed73c9b Expose delta_clip_start_height for use by others 2016-12-13 01:41:08 -08:00
João Brázio 3f75edb1d6 Updated bq Hephestos 2 example configuration 2016-12-13 09:26:07 +00:00
Daniel Martinez b796e7031d Update Aragonese translation 2016-12-12 17:36:33 -08:00
AnHardt cd2b74e88d Replace ftostr62sign with ftostr62rj 
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
 2016-12-12 20:25:20 +01:00
AnHardt 795541f87e utf8-mapper for Turkish 
The non utf8 version of turkish is a bit unhandy.

Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
 2016-12-12 15:56:59 +01:00
Scott Lahteine 7c71bb2900 Merge pull request #5471 from thinkyhead/rc_planner_report_m503 
Patch to show E factors in M503
 2016-12-11 17:47:41 -08:00
Scott Lahteine 39401b7472 Patch to show E factors in M503 2016-12-11 17:37:29 -08:00
Scott Lahteine 6b50230022 Merge pull request #5447 from thinkyhead/rc_update_dutch 
Dutch cleanup, ordering, placeholders
 2016-12-10 22:13:20 -08:00
Scott Lahteine 2c97c11731 Merge pull request #5454 from thinkyhead/rc_fix_delta_g29 
Fix G29 starting height on DELTA
 2016-12-10 22:10:33 -08:00
Scott Lahteine 8239c45b30 Merge pull request #5448 from thinkyhead/rc_eeprom_bump 
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
 2016-12-10 22:06:00 -08:00
Scott Lahteine 21ed43df5f New Dutch terms 2016-12-10 21:59:45 -08:00
Scott Lahteine 4bc6536f54 Move to safe zone on DELTA if using do_blocking_move_to* 2016-12-10 21:28:24 -08:00
Scott Lahteine 6f389158d7 Compile less code with EEPROM off 2016-12-09 06:05:32 -08:00
Scott Lahteine f2301a2a04 Add e-stepper count to EEPROM (for planner vars) 2016-12-09 06:05:31 -08:00
Scott Lahteine 53c9fca0f6 Only write to EEPROM when a byte changes 2016-12-09 06:05:31 -08:00
AnHardt 13eebd11cf volatile_block_buffer_runtime_us 
`block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR.
So it needs to be volatile and interrupt protected.
 2016-12-09 14:49:02 +01:00
Scott Lahteine 8383f35b40 Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code 
Slightly shrink jerk and advance code
 2016-12-09 02:54:03 -08:00
Gege2B 40453c1b9a Update french translation (LIGHTS str) 2016-12-09 11:18:29 +01:00
Scott Lahteine fc2fc828b3 Prettify LIN_ADVANCE code with the positive condition 2016-12-09 00:29:07 -08:00
Scott Lahteine 1929502e15 Add const to some variables 2016-12-09 00:29:06 -08:00
Scott Lahteine 2da4d22520 Pretty up ADVANCE code 2016-12-08 22:51:28 -08:00
Scott Lahteine af024e1d7c Pretty up coast / reverse jerk code 2016-12-08 22:50:25 -08:00
Scott Lahteine 3f3b5c86d8 Slightly shrink code for jerk-based reduction of safe_speed 2016-12-08 22:24:29 -08:00
AnHardt 87fe20b5f5 Simplify long_move() 
We are not really interested in, if there are blocks.
All information we need is in `block_buffer_runtime_us`.
 2016-12-09 00:13:35 +01:00
Scott Lahteine 574d9c7d3d Merge pull request #5432 from Kaibob2/patch-2 
Update language_de.h
 2016-12-08 13:14:04 -08:00
Scott Lahteine f089279263 Merge pull request #5431 from esenapaj/Suppress-warnings,-etc 
Suppress warnings, etc
 2016-12-08 13:10:12 -08:00
Scott Lahteine d92ccb230c Merge pull request #5438 from AnHardt/patch-long_move 
Patch long_move()
 2016-12-08 13:08:36 -08:00
AnHardt 706b240251 Patch long_move() 
While the last move in the planner_buffer is running
it's duration is already subtracted from block_buffer_runtime_us.
 2016-12-08 21:03:26 +01:00
esenapaj a298a58684 Remove redundant "E" 2016-12-09 02:27:34 +09:00
Kai 390a6d976a Update language_de.h 
#define MSG_ENDSTOP_ABORT  doesn't fit in Display 
See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487
 2016-12-08 12:18:19 +01:00
esenapaj e9393c3634 Suppress warnings, etc 
・Suppress warnings
・Remove unused variable "did_update"
 2016-12-08 17:47:59 +09:00
Scott Lahteine da6a094424 Sanity-check inverting and pullups for Z probe and Z endstop 
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
 2016-12-08 00:12:19 -08:00
Scott Lahteine 3fb43c11fc Fix compile error with LCD_I2C_VIKI 2016-12-07 23:29:45 -06:00
Scott Lahteine aa241c63b3 Include M205 note in configurations 2016-12-07 14:45:44 -06:00
Scott Lahteine c8a95ec514 Merge pull request #5413 from MagoKimbra/rc_fix_mesh 
Fix Mesh without Fade Height
 2016-12-07 03:16:02 -06:00
Scott Lahteine 35ad9626f1 Merge pull request #5410 from thinkyhead/rc_polish_update 
Update Polish language, reduce filament change messages
 2016-12-07 03:15:53 -06:00
Scott Lahteine 01e5d46ea7 Patch some planner compile errors 2016-12-07 02:26:24 -06:00
MagoKimbra 5383212a28 Fix Mesh without Fade Height 2016-12-07 09:23:42 +01:00
Scott Lahteine dbe1dc1452 Merge pull request #5406 from Rigid3D/RCBugFix 
Turkish Translation Update
 2016-12-07 00:56:08 -06:00
Scott Lahteine 4783a59249 Remove filament-change empty lines from languages 2016-12-07 00:53:03 -06:00
Scott Lahteine 1705099c3e Save space by not defining unused filament change message lines 2016-12-07 00:53:03 -06:00
android444 9b1f4b514b Update Polish language 
Translation of messages in English to Polish.
 2016-12-06 22:28:33 -06:00
Robert Marko 84f7e1de04 Updates to Croatian language 2016-12-06 22:24:12 -06:00
esenapaj 08cdaaf19b README and Version for 1.1.0-RCBugFix 
Sync with RC8
 2016-12-07 10:43:58 +09:00
Mehmet Sutas f4663cb677 Update language_tr_utf8.h 2016-12-07 00:21:56 +03:00
Mehmet Sutas b4fd115d4e Update language_tr.h 2016-12-07 00:20:07 +03:00
Scott Lahteine 83c5026db1 Ignore homing button when SD printing 
As suggested in #5404 by @android444
 2016-12-06 14:22:34 -06:00
Scott Lahteine 312caef472 Merge pull request #5398 from thinkyhead/rc_croatian_cleanup 
Fix Croatian spacing, extra #endif
 2016-12-06 03:22:19 -06:00
Scott Lahteine 46b65773ea Fix Croatian spacing, extra #endif 2016-12-06 03:10:37 -06:00
Scott Lahteine 3f2faac9d1 Merge pull request #5388 from thinkyhead/rc_subdivide_bilinear 
Subdivide Bilinear Grid with Catmull Rom Splines
 2016-12-05 20:28:50 -06:00
Scott Lahteine b5b5edd9ad Merge pull request #5394 from thinkyhead/rc_drop_board_99 
Remove mystery-board 99
 2016-12-05 20:28:35 -06:00
Scott Lahteine c48901f355 Remove mystery-board 99 2016-12-05 20:16:50 -06:00
akaJes d7b948610a Experimental bilinear subdivision option 2016-12-05 20:11:24 -06:00
Scott Lahteine 6253b765aa Merge pull request #5389 from thinkyhead/distribute_screen_updates 
Distribute GLCD screen updates in time
 2016-12-05 20:08:33 -06:00
Scott Lahteine b203901143 Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures 
Fix auto_report_temperatures()
 2016-12-05 19:38:23 -06:00
AnHardt 59a27ed27d Fix auto_report_temperatures() 
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
 2016-12-06 01:26:44 +01:00
AnHardt a6fbd4a5d8 Distribute GLCD screen updates in time 
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.

This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.

Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.

13:45:59.213 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30;   #:17 >:13 s:30;   S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59

03:30:36.779 : echo: #:8 >:7 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:9 >:7 s:16;   #:8 >:6 s:14;   S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:8 >:8 s:16;   #:8 >:6 s:14;   S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:9 >:6 s:15;   S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14;   #:10 >:8 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:7 s:15;   #:9 >:6 s:15;   S#:36 S>:26 S:62

#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
 2016-12-05 12:22:54 -06:00
Scott Lahteine f882355994 Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements 
Account for LCD improvements in ENSURE_SMOOTH_MOVES
 2016-12-05 11:23:58 -06:00
Scott Lahteine 20e834461d Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal 
Show decimal for small numbers in ftostr4sign
 2016-12-05 11:22:45 -06:00
Scott Lahteine b6b100c471 Merge pull request #5371 from thinkyhead/rc_extruders_can_differ 
Allow distinct factors for multiple extruders
 2016-12-05 11:22:31 -06:00
Scott Lahteine 449d9cbf60 Add placeholders for Polish translatable strings 2016-12-05 10:37:00 -06:00
c64pl 643dc4b64e Update language_pl.h 
Fixed translations
 2016-12-05 10:37:00 -06:00
Scott Lahteine 0974b75fb6 Merge pull request #5386 from thinkyhead/rc_galician_update 
Galician language update.
 2016-12-05 10:36:26 -06:00
Rafa Couto 2b9115330d Galician language update. 2016-12-05 10:11:28 -06:00
Scott Lahteine 1f3e2440bc Merge pull request #5175 from thinkyhead/rc_dualx_homing 
Unpark when using Z_SAFE_HOMING with Dual X
 2016-12-05 10:02:56 -06:00
Scott Lahteine d5bf1684fe Implement as optional feature LCD_DECIMAL_SMALL_XY 
And reduce the function size to simplify
 2016-12-05 09:26:05 -06:00
Guthenberg bfb8d3b53e Show more decimals in Display, if possible 
_123, -123, _-12, __-1  plus  1234, 12.3, -1.2
 2016-12-05 09:05:46 -06:00
Scott Lahteine 1e30d1da47 Simplify itostr4sign 
- This function becomes obsolete if ftostr4sign is re-written.
 2016-12-05 09:05:46 -06:00
Scott Lahteine 82a187acae Merge pull request #5359 from AnHardt/update-de 
Add missing translations to lang-de
 2016-12-05 07:31:28 -06:00
Scott Lahteine 4bafdf4b66 Support DISTINCT_E_FACTORS in LCD Motion Menu 2016-12-05 07:26:18 -06:00
Scott Lahteine 3391c785c6 Support for distinct E factors 2016-12-05 07:26:18 -06:00
Scott Lahteine 0dfe95eaba Adjust formatting in Planner 2016-12-05 07:26:17 -06:00
Scott Lahteine 09587f7c0d Fix rows error in DOGM 2016-12-05 07:14:11 -06:00
Scott Lahteine c47e07d129 Fix Dual X software endstops 2016-12-05 06:51:41 -06:00
Scott Lahteine 4217e9653e Adjust park code in tool_change 2016-12-05 06:51:41 -06:00
Scott Lahteine b20405db31 Only DXC_AUTO_PARK_MODE should auto-move in tool_change 2016-12-05 06:48:43 -06:00
Scott Lahteine ca24af7d5d Dual X with home_z_safely is not parked 2016-12-05 06:43:26 -06:00
Scott Lahteine 0e15b4f434 Dual X set_axis_is_at_home can use x_home_pos for both 2016-12-05 06:43:26 -06:00
Scott Lahteine 54109dfaec Reduce code size for Dual X un-park 2016-12-05 06:43:26 -06:00
Scott Lahteine fe96f74db1 Use const arguments in Dual X helper functions 2016-12-05 06:43:26 -06:00
Scott Lahteine 41278c1e8b Apply LOGICAL_POSITION to home positions on Dual X 2016-12-05 06:43:26 -06:00
Scott Lahteine 053fb55af6 Fix modes ordering in prepare_move_to_destination_dualx 2016-12-05 06:43:26 -06:00
Scott Lahteine ee50928eee Make LOGICAL and RAW position macros ternary-compatible 2016-12-05 06:43:26 -06:00
Scott Lahteine 56dd15c0ad Use SET_INPUT for PS_ON_PIN in kill 2016-12-05 06:43:26 -06:00
Scott Lahteine 200cf3e9f9 Merge pull request #5381 from thinkyhead/rc_fix_fade_factor 
Properly apply fade_factor to MBL
 2016-12-05 06:06:13 -06:00
Scott Lahteine 84ff78c1e3 Pass the fade factor to mbl.get_z 2016-12-05 03:01:51 -06:00
Scott Lahteine 85c2b96685 Apply const to MBL class methods 2016-12-05 02:50:59 -06:00
Scott Lahteine c06161b773 Use apply_leveling, not MBL directly 2016-12-05 01:53:36 -06:00
Scott Lahteine 818f8b93d3 Merge pull request #5378 from thinkyhead/rc_duration_rj 
Better alignment of elapsed print time
 2016-12-04 22:42:23 -06:00
Scott Lahteine 9d88a61d52 Better alignment of elapsed print time 2016-12-04 21:30:49 -06:00
Scott Lahteine 0b53d78046 Tweak editable items for debugging 2016-12-04 03:51:10 -06:00
Scott Lahteine fccc97de6d Save PROGMEM with string changes 
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
 2016-12-03 19:21:46 -06:00
AnHardt e7fc353f08 Add missing translations to lang-de 2016-12-03 20:51:49 +01:00
Scott Lahteine 3f2cb376e0 Add placeholders for Bulgarian translation 2016-12-03 12:14:02 -06:00
Scott Lahteine b22d37ba52 Merge pull request #5364 from thinkyhead/rc_croatian_update 
Update Croatian to include missing strings
 2016-12-03 11:37:42 -06:00
Robert Marko b796a687ca Update Croatian to include missing strings 
Added all missing strings according to English
 2016-12-03 11:15:41 -06:00
Scott Lahteine 255ed80164 Fix hotend offset report in M503 2016-12-03 10:17:35 -06:00
Petr Zahradník c66f3ed34b
Update Czech 2016-12-03 10:32:34 +01:00
Scott Lahteine cbf208ea1f Merge pull request #5348 from Kaibob2/patch-1 
Update language_de.h
 2016-12-03 01:53:24 -06:00
Scott Lahteine a2660cf688 Merge pull request #5347 from tnw513/fix-italian 
Added missing translations
 2016-12-03 01:52:45 -06:00
Scott Lahteine 27dd5acc22 Fix set_led_color for BLINKM 
Follow-up to #5330
 2016-12-03 01:51:11 -06:00
Kai 8530c32309 Update language_de.h 
Grammar corrections
 2016-12-02 19:40:36 +01:00
Silvio Didonna f1d5ffa211 Added missing translations 2016-12-02 18:49:39 +01:00
Scott Lahteine b0361ebe4f Merge pull request #5343 from thinkyhead/rc_invert_case_light 
Allow case light pin to be active low
 2016-12-02 01:17:11 -06:00
Scott Lahteine f60b4f8659 Allow case light pin to be active low 2016-12-01 23:32:34 -06:00
Scott Lahteine 3f4c02e42f Merge pull request #5259 from Sebastianv650/Allow_UART-ISR_inside_Stepper 
Allow UART ISRs inside the stepper ISR
 2016-12-01 23:17:42 -06:00
Scott Lahteine d07229f185 Fix redraw in SD Card menus 2016-12-01 18:15:58 -06:00
Scott Lahteine 47b4b21308 Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072 
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
 2016-12-01 13:37:02 -06:00
Scott Lahteine 8d14420331 Fix compile without ENABLE_LEVELING_FADE_HEIGHT 2016-12-01 11:37:24 -06:00
Scott Lahteine 415294801f Merge pull request #5330 from thinkyhead/rc_rgb_led 
Support for an RGB LED using 3 pins
 2016-11-30 14:14:00 -06:00
esenapaj 0909cf3d46 Adjust spacing 2016-11-30 19:39:39 +09:00
esenapaj 8e9e9c17b0 Follow-up the PR #5323 (Adding ukrainian language support) 
・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head
 2016-11-30 19:39:39 +09:00
esenapaj d92ce8849b Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc 
・Make descriptions the same as others
 2016-11-30 19:39:38 +09:00
Scott Lahteine e00b380489 Merge pull request #5323 from akaJes/lang-ua 
Adding ukrainian language support
 2016-11-30 01:10:40 -06:00
Scott Lahteine 65c50e062e Support for an RGB LED using 3 pins 2016-11-30 00:02:31 -06:00
esenapaj 3047f3c85c Suppress warning 2016-11-30 00:32:56 +09:00
jes f674246397 extend Configurations files 2016-11-29 15:04:36 +02:00
jes c90191faaf adding ukrainian laguage support 2016-11-29 14:49:45 +02:00
Sebastianv650 912704a0d8 Enable ISRs inside temperature ISR 
to capture chars at UART at 250000 baud.
 2016-11-28 20:08:50 +01:00
Sebastianv650 f62f4006af Account for LCD improvements in ENSURE_SMOOTH_MOVES 
.. and give the hint to try lower values if possible.
 2016-11-28 17:44:19 +01:00
Scott Lahteine 092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted 
Support for COREYX, COREZX, COREZY
 2016-11-28 02:26:41 -06:00
Scott Lahteine e9e4208ff1 Merge pull request #5274 from Sebastianv650/improve_smooth_moves 
Improvement for ENSURE_SMOOTH_MOVES
 2016-11-28 02:22:08 -06:00
Scott Lahteine c7935bb0d2 Merge pull request #5299 from thinkyhead/rc_bed_correction_fade 
Add a fade factor for mesh leveling
 2016-11-28 02:07:51 -06:00
Scott Lahteine a69b1ee691 Merge pull request #5313 from thinkyhead/rc_fix_menu_actions 
Keep drawing menu unless screen changes
 2016-11-28 02:01:39 -06:00
Scott Lahteine 32ee3acf86 Merge pull request #5315 from thinkyhead/rc_fixup_material_menus 
Refine material heatup menu items
 2016-11-28 01:46:51 -06:00
Scott Lahteine c70a06daf1 lcd_save_previous_menu => lcd_save_previous_screen 2016-11-28 01:46:18 -06:00
Scott Lahteine 13ea43cc8d Only exit menu handler when the screen changes 2016-11-28 01:46:18 -06:00
Scott Lahteine f45b6a7762 Merge pull request #5314 from thinkyhead/case_light_menu_fix 
Fix and optimize case-light code
 2016-11-28 01:45:27 -06:00
Scott Lahteine 59fafb93b2 Merge pull request #5304 from AnHardt/pixel-shifting 
MENU_HOLLOW_FRAME for the menu screens
 2016-11-28 01:41:47 -06:00
Scott Lahteine 0951d385ce Don't set heater temperature above its maximum 2016-11-28 01:37:24 -06:00
Scott Lahteine c9193e856d Limit preheat parameters based on all nozzles 2016-11-28 01:37:24 -06:00
Scott Lahteine bb4529f7d2 PLA / ABS => Material 1 / 2 2016-11-28 01:37:24 -06:00
Scott Lahteine 61437d988a Fix and optimize case-light code 2016-11-28 01:34:52 -06:00
AnHardt 7a9fa78822 MENU_HOLLOW_FRAME for the menu screens 
MENU_HOLLOW_FRAME for the menu screens and
some pixel shifting to optimize the look with tall fonts. (cn)
 2016-11-27 22:59:05 +01:00
AnHardt 24ca1a6289 Not more then 4 stripes for u8g-devices 
To optimise speed.
Costs well invested 128Byte of RAM.
 2016-11-26 19:08:33 +01:00
Scott Lahteine aee71c543e Minor formatting in language.h 2016-11-26 06:53:52 -06:00
Scott Lahteine 05d8d189f6 Adjust spacing in utf_mapper.h 2016-11-26 06:53:52 -06:00
Scott Lahteine 5460a529da Add option DOGM_SPI_DELAY_US 2016-11-26 06:53:52 -06:00
Scott Lahteine 71842b6a17 Apply const to LCD arguments and locals 2016-11-26 06:53:52 -06:00
Scott Lahteine b1abd7edef Optimize graphical display with selective rendering 2016-11-26 06:53:52 -06:00
AnHardt b91fab2d7d Fix USE_BIG_EDIT_FONT 2016-11-26 13:50:25 +01:00
Scott Lahteine 4cd73e183d Hide hidden files and folders 2016-11-26 06:26:28 -06:00
Scott Lahteine f6f77d34a1 Add a fade factor for mesh leveling 2016-11-26 03:41:26 -06:00
AnHardt 75fdcc14b7 Activate font and mapper for el-gr 2016-11-26 02:30:37 +01:00
AnHardt a0004e7cd3 Change font decent to -1 for tt and gr 
For speeding up font drawing unify font decent.
Tr and Gr have ben the only fonts with a font decent of -2.
Sorry for some, a bit compressd, but hopefully still readeble symbols.
 2016-11-26 02:29:23 +01:00
Scott Lahteine 307f263f89 Merge pull request #5292 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-11-25 16:56:49 -06:00
esenapaj 7070143042 Update Japanese translation 
・Add new translation
 2016-11-24 21:10:40 +09:00
esenapaj ef97645002 Follow-up the PR #5255 (Case light menu (3rd attempt)) 2016-11-24 19:42:05 +09:00
Scott Lahteine 2a9b3376a9 Merge pull request #5289 from thinkyhead/rc_which_menu_actions 
Drop "static" keyword in ultralcd.cpp function declarations
 2016-11-23 23:04:05 -06:00
Scott Lahteine b97dafe4b8 Drop "static" keyword in ultralcd.cpp function declarations 2016-11-23 20:43:01 -06:00
Scott Lahteine 2e966f8e5b Patch Capabilities Report for "PROGRESS" 2016-11-23 19:31:46 -06:00
Scott Lahteine f60321d3e3 Merge pull request #5284 from thinkyhead/rc_turkish_update 
Turkish update (squashed)
 2016-11-23 14:57:52 -06:00
Mehmet Sutas a26668b10c Add UTF8 Turkish Translation 2016-11-23 14:19:16 -06:00
Mehmet Sutas 61aa796307 Added Human Readable Comments 2016-11-23 14:19:16 -06:00
Mehmet Sutas 6fb9c6fe07 Follow-up for #5167 Turkish Language 
Add check for Turkish Font before setting better font for graphic displays
 2016-11-23 14:19:15 -06:00
Scott Lahteine d891324830 Merge pull request #5258 from mosh1/mbl_speed_fix 
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
 2016-11-23 14:15:01 -06:00
Scott Lahteine 7f8133a51f Merge pull request #5255 from Kaibob2/CaseLightMenu 
Case light menu (3rd attempt)
 2016-11-23 13:46:33 -06:00
Kai e9b42f4f47 Update language_de.h 2016-11-23 19:29:19 +01:00
Kai 0c341f0c50 Added Menu entry for Case light 2016-11-23 19:29:15 +01:00
Scott Lahteine 3bc2273ac9 Comment M540 2016-11-21 18:08:00 -06:00
Scott Lahteine 14b74181f5 Merge pull request #5179 from thinkyhead/rc_TMC2130 
TMC2130 "Silent StepStick" support
 2016-11-21 14:10:52 -06:00
Scott Lahteine bb2114a060 Merge pull request #5264 from thinkyhead/rc_delta_safe_zone 
Add an option for delta to home to the top
 2016-11-21 13:56:44 -06:00
Scott Lahteine 38466b1d2f Merge pull request #5271 from esenapaj/Fix-for-the-PR-#5267 
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
 2016-11-21 13:55:56 -06:00
Scott Lahteine 9b96a4a53b Merge pull request #5246 from thinkyhead/rc_some_cleanup 
Minor stepper cleanup
 2016-11-21 13:55:25 -06:00
Sebastianv650 8190483eeb Improvement for ENSURE_SMOOTH_MOVES 
Instead of waiting for a single long block, compare the complete block
buffer runtime for the long_move() check.
 2016-11-21 17:58:24 +01:00
esenapaj da67037550 Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm) 
・Fix memory leak
 2016-11-21 22:31:01 +09:00
Scott Lahteine 0f891e848b Merge pull request #5268 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-11-21 03:18:36 -06:00
esenapaj 190a04c467 Update Japanese translation 
・Change translation for 16 width LCD
 2016-11-21 17:51:43 +09:00
esenapaj 7b836a4000 Introduce a +1234.56 format for over 999 steps/mm 2016-11-21 17:45:07 +09:00
Scott Lahteine 3e0376b45e Reorder M114 and M119 gcode cases 2016-11-21 00:52:19 -06:00
Scott Lahteine 644fac5d34 Reduce all stepper_indirection init code with macros 2016-11-21 00:52:18 -06:00
Scott Lahteine 4e4f37b6c2 Code formatting for TMC and L6470 config options 2016-11-21 00:52:18 -06:00
Scott Lahteine 127e21ae00 Extend M122 for all steppers 2016-11-21 00:52:18 -06:00
Scott Lahteine bf5f5f44cc Make TMC2130 init code auto-configure 
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
 2016-11-21 00:52:17 -06:00
Moritz d67c1d825f Add TMC2130 support 2016-11-21 00:17:45 -06:00
Scott Lahteine 11effeee2c Add an option for delta to home to the top 2016-11-20 23:12:07 -06:00
Sebastianv650 50059690e0 Allow UART ISRs inside the stepper ISR 
If the stepper ISR takes too long, chars are lost which leads to serial
communication errors like "Line number not +1" or "Wrong checksum". In
worst case, the printer can even do crazy moves.

With this changes, UART interrupts are handled inside the stepper ISR.
This way, no chars should be lost.
 2016-11-20 13:09:12 +01:00
Moshen Chan 29b174bfb9 Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED 2016-11-19 16:34:41 -08:00
AnHardt 88b38eafd8 Endstop interrupt refinement 
At the start of a move, check if the endstops are already triggered.
The 'change' interrupts will not see a change if already triggered.
 2016-11-19 13:30:49 +01:00
Scott Lahteine 79c8591192 Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax 
Ensure smooth print moves even with LCD enabled
 2016-11-19 01:38:41 -06:00
Scott Lahteine 0215cacb30 Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634 
Re-follow the PR #4634 (Set language display charset in language.h)
 2016-11-19 01:32:40 -06:00
Scott Lahteine 2cc32d85a3 Adjust ENSURE_SMOOTH_MOVES coding style 2016-11-19 01:28:48 -06:00
Scott Lahteine 072541f286 Update ENSURE_SMOOTH_MOVES in all configs 2016-11-19 01:28:47 -06:00
Sebastianv650 de89dc9f04 Ensure smooth print moves even with LCD enabled 
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.

This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
 2016-11-19 01:28:47 -06:00
Scott Lahteine 87b6b19256 Patch CASE_LIGHT typo 2016-11-18 23:49:12 -06:00
Scott Lahteine 0be6167f14 Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18 
K8200: Example configuration back in sync
 2016-11-18 22:49:18 -06:00
Scott Lahteine eb714ee873 Move dummy thermistor opts, fix redundant sensor comment 2016-11-18 22:24:48 -06:00
Scott Lahteine 7a99c6ce4f Reformat temp sensor listing 2016-11-18 22:24:47 -06:00
Scott Lahteine 181cdb3cfe Move GCode list above include lines 2016-11-18 22:24:46 -06:00
Scott Lahteine 25d0c167bd More detailed static_assert messages 2016-11-18 22:24:46 -06:00
Scott Lahteine eb120e518c Followup to new endstop interrupts feature 
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
 2016-11-18 21:53:45 -06:00
Scott Lahteine 832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts 
Introduce endstop interrupts
 2016-11-18 20:50:24 -06:00
CONSULitAS cbae44df64 K8200: Example configuration back in sync 
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
 2016-11-18 22:55:02 +01:00
esenapaj 5db3738fe7 Re-follow the PR #4634 (Set language display charset in language.h) 2016-11-18 17:44:49 +09:00
Scott Lahteine 6eb6f12c64 Patch up some language formatting 2016-11-18 01:16:58 -06:00
Bo Herrmannsen 8cffa60cc5 Update to Danish language 10/11-2016 2016-11-18 01:16:57 -06:00
Scott Lahteine 98600e1433 Minor stepper cleanup 2016-11-18 01:15:57 -06:00
Florian Heilmann d08867986e Add autotemp capabilities to M104 
This allows M104 to pass the F and B parameters to enable autotemp as well
 2016-11-17 11:28:19 -06:00
Sebastianv650 c11b2bb777 Bugfix LIN_ADV 
Advance has nothing todo with Z_AXIS, strange copy&paste error?
 2016-11-17 11:28:19 -06:00
Scott Lahteine ee0765e872 Merge pull request #5233 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-11-17 03:38:19 -06:00
Scott Lahteine 2330619da0 Merge pull request #5191 from petrzjunior/const 
Replace const bool with #define for consistency
 2016-11-17 03:37:32 -06:00
esenapaj b278b7a395 Update Japanese translation 
Only adjust spacing
 2016-11-17 09:05:51 +09:00
Petr Zahradník junior d7ce5d271b
Replace const bool with #define for consistency 2016-11-16 18:55:21 +01:00
Scott Lahteine d63230d73e Merge pull request #5192 from Kaibob2/patch-7 
Printer Stats / Completed prints line doesn't fit in display (when german)
 2016-11-16 00:16:36 -06:00
Scott Lahteine 548b45026d Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt 
Save some cycle inside the planner
 2016-11-16 00:06:55 -06:00
Scott Lahteine 5d23e52d75 Merge pull request #5228 from thinkyhead/rc_keep_last_mix 
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
 2016-11-15 19:12:01 -06:00
Scott Lahteine db47aa983d Merge pull request #5226 from mtowara/RCBugFix 
bump -std in Makefile to c++11
 2016-11-15 16:13:32 -06:00
Scott Lahteine 99b0c1fe56 Fix DIRECT_MIXING_IN_G1 to preserve the previous mix 2016-11-15 16:12:26 -06:00
Markus Towara 23a675f621 reduce binary size of .hex 
still a few bytes bigger than with arduino but nothing major
 2016-11-15 21:57:15 +01:00
Markus Towara 5b6e2cecf5 bump c/c++ standard to gnu11 
needed for constexpr
 2016-11-15 21:54:12 +01:00
Scott Lahteine 410657b050 Fix G30 with limits, print correct probe XY 2016-11-15 14:10:28 -06:00
AnHardt f3eee02596 Introduce endstop interrupts 
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.

The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.

This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
 2016-11-15 12:07:41 +01:00
Sebastianv650 e3ffb58fbd Save some cycle inside the planner 
planner.h:
fan speed is used to set integer variables, so no need for long.
Basicaly a byte should be enough for all the fan things, as it's 0-255?

planner.cpp:
Save some float multiplications.
We could squeeze out even more by defining feedrate_percentage,
saved_feedrate_percentage and flow_percentage as float instead of int.
Everytime they are used in the time-critical planner, they are casted to
float and multiplied by 0.01. Not done jet, as they are used in LCD menu
functions I don't know well enough.
 2016-11-13 13:34:12 +01:00
Scott Lahteine 665b7f3893 Merge pull request #5212 from thinkyhead/rc_mixing_faster 
Store mix factors as reciprocals and multiply
 2016-11-12 18:47:11 -06:00
Scott Lahteine 60cc9342a4 Merge pull request #5188 from thinkyhead/rc_extended_host_support 
Extended host support: M155 Auto temp report, M115 capabilities
 2016-11-12 15:38:06 -06:00
Scott Lahteine f663220e87 Store Mix factors as reciprocals and multiply 2016-11-12 15:19:18 -06:00
Scott Lahteine ea3c08d249 Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc 
Follow up the PR #5167 (Add Turkish Language) again, etc
 2016-11-12 13:11:54 -06:00
Scott Lahteine c488378532 Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch 
Remove useless line from stepper ISR
 2016-11-12 12:43:07 -06:00
Michael Neumann 8bdf303da0 Update pins_MEGATRONICS_3.h 2016-11-12 12:26:07 +01:00
Michael Neumann 3890366c83 Update pins.h 2016-11-12 12:25:45 +01:00
Michael Neumann c0d45ca7f2 Update boards.h 2016-11-12 12:24:47 +01:00
Sebastianv650 cdc18f8c22 Remove useless line from stepper ISR 
The flag is already set inside planner.get_current_block(). Doing it
twice isn't making it better..
 2016-11-11 19:35:03 +01:00
Kai 8e8b4398f3 Printer Stats / Completed prints line doesn't fit in display (when german) 2016-11-09 22:03:25 +01:00
Scott Lahteine b31a07e261 Stateful M355 with separate P parameter 2016-11-09 03:28:18 -06:00
Scott Lahteine 3c9a838651 Extended capabilities report in M115 2016-11-09 02:32:58 -06:00
Scott Lahteine 68b866b5dd Add M155 - Auto-report temperature with interval 2016-11-09 02:32:58 -06:00
Scott Lahteine 68b46fb2c9 Allow send to i2c address 0 (broadcast) 2016-11-08 17:54:55 -06:00
Scott Lahteine 75bfde9945 M155=>M260, M156=>M261 2016-11-08 17:54:54 -06:00
esenapaj 2ae72b0491 Follow up the PR #5167 (Add Turkish Language) again, etc 
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
 2016-11-09 06:31:21 +09:00
Scott Lahteine 06f2282f82 Merge pull request #5176 from thinkyhead/rc_filchange_feedback 
Give instant feedback for filament change
 2016-11-07 12:11:54 -06:00
Scott Lahteine dcfd7c69e8 Merge pull request #5163 from nzinov/RCBugFix 
Improve G30 probing command - add optional arguments
 2016-11-07 11:37:13 -06:00
Scott Lahteine e765eebfb0 Patch spacing in bilinear grid report 2016-11-07 04:08:25 -06:00
Scott Lahteine 7780052fb3 Give instant feedback for filament change 2016-11-07 03:48:16 -06:00
esenapaj 24e3f7abe7 Update Turkish translation 
・Add new translation
 2016-11-07 04:59:18 +09:00
esenapaj be48792e9c Follow up the PR #5167 (Add Turkish Language), etc 
・Remove all the #ifndef
・Follow the PR #4603 (Strip never-translated strings from language
files)
・Follow the PR #4634 (Set language display charset in language.h)
・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code)
・Adjust spacing
 2016-11-06 23:59:02 +09:00
Scott Lahteine 1864b282c5 Implement reversed CORE options 2016-11-05 23:47:51 -05:00
Scott Lahteine e3c8318504 Add reversed CORE options 2016-11-05 23:47:46 -05:00
Rigid3D 2327764980 Add Turkish Language 2016-11-05 21:06:16 -05:00
Nikolay Zinov dea00bbcf1 improve G30 probing 
Add optional parameters
X, Y for probe point
S sets stowing on and off
 2016-11-05 13:22:45 +03:00
Scott Lahteine 00662b8635 Minor babystep cleanup patches 2016-11-03 23:31:45 -05:00
Scott Lahteine cad792e702 Reduce code for invariant lcd_detected 2016-11-03 23:31:45 -05:00
Scott Lahteine b23d255491 Move macros above Stepper::babystep 2016-11-03 23:31:45 -05:00
Scott Lahteine cc57d46158 Fix set_position for CoreYZ 2016-11-03 23:31:45 -05:00
Scott Lahteine 0269347682 Merge pull request #5141 from thinkyhead/rc_old_slowdown_what 
OLD_SLOWDOWN does nothing, so remove it
 2016-11-03 23:30:43 -05:00
Scott Lahteine e92e2b2446 Merge pull request #5144 from Sebastianv650/RCBugFix_LIN_ADV_wipe 
Account for wipe moves
 2016-11-03 23:19:25 -05:00
Scott Lahteine 176aeafc19 Don't define bilinear_line_to_destination on kinematic setups 2016-11-03 14:10:07 -05:00
Sebastianv650 d448500643 Account for moves with negative E movements 
Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases).
I also added a more detailed comment to make it more clear what the if statement does.
 2016-11-03 17:01:17 +01:00
Scott Lahteine 236853df22 Corrections to bilinear_line_to_destination 
- Allow more than 9x9 probe points
- Account for the probe starting position
 2016-11-03 04:43:59 -05:00
Scott Lahteine 0115e495fe Fix up Dual X switch blocks 2016-11-02 21:38:50 -05:00
Scott Lahteine 2495ab7af2 Make dual_x_carriage_mode an enumeration 2016-11-02 21:38:49 -05:00
Scott Lahteine d6c36f5bb9 Fix Z raise with DXC_AUTO_PARK_MODE 2016-11-02 21:36:50 -05:00
Scott Lahteine 0c79553fc5 Cast int to AxisEnum for some accessors 2016-11-02 17:42:24 -05:00
Scott Lahteine adbf1f7dca Add M355 to the GCodes list. 2016-11-02 16:43:52 -05:00
Scott Lahteine 63efc10599 Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines 
Split cartesian moves on grid boundaries with bilinear ABL
 2016-11-02 16:14:55 -05:00
Scott Lahteine 12167bc8f3 OLD_SLOWDOWN does nothing, so remove it 2016-11-02 01:28:19 -05:00
esenapaj c8c1a28f6f Follow-up the PR #5089 (Centralize click-handling in the LCD loop) 
bool feedback is no longer used
 2016-11-02 08:36:02 +09:00
esenapaj c3a105186d Follow-up the PR #5133 (M355 Case light) 
・Add CASE_LIGHT_PIN into pinsDebug.h
 2016-11-02 00:31:50 +09:00
Scott Lahteine ee5b8d6dc8 Split moves on grid boundaries with bilinear ABL on cartesian 2016-11-01 08:25:47 -05:00
Scott Lahteine 66744a6076 Merge pull request #5133 from thinkyhead/rc_M355_case_light 
M355 Case light
 2016-11-01 07:51:27 -05:00
Scott Lahteine 955d14acb0 Patch photo pin code style 2016-11-01 06:30:14 -05:00
Stanley ab3f966f5f Case light G-code M355 
implemented G-Code M355 into Marlin
 2016-11-01 06:30:14 -05:00
Scott Lahteine 8b44413498 Merge pull request #5124 from Sebastianv650/RCBugFix_LIN_ADV-Patch 
BugFix for incorrect E-speed calculation
 2016-11-01 05:13:17 -05:00
Scott Lahteine f418e82b15 Remove redundant definition of EN_C 2016-11-01 05:10:07 -05:00
Sebastianv650 f9bea7968f BugFix for incorrect E-speed calculation 
The extrusion speed was wrong due to a not high enough precision of
esteps to XY steps, therefore now the target float values are used to
calculate the ratio between XY movement and extrusion speed.
The e_speed_multiplier8 was replaced by an absolute multiplier called
abs_adv_steps_multiplier8, therefore one multiplication and bitshift can
be saved inside the stepper ISR. Due to this, also extruder_advance_k is
better suited inside the planner and not the stepper files any more.
 2016-11-01 08:08:47 +01:00
Bob-the-Kuhn c20b4098be 2 bug fixes & some minor changes 
see detailed  description in PR #5118
 2016-11-01 01:29:41 -05:00
Scott Lahteine fa6bf12697 Merge pull request #5118 from thinkyhead/rc_expanded_M43 
Enhancements to M43 pins debugging
 2016-10-31 08:29:53 -05:00
Scott Lahteine 3a107e280d Developer note in pins_MIGHTYBOARD_REVE.h 2016-10-31 08:22:39 -05:00
Scott Lahteine 85e307dcd8 No FAN0_PIN 2016-10-31 08:08:03 -05:00
Scott Lahteine ff3a8ca0d1 Use NUM_DIGITAL_PINS instead of custom DIO_COUNT 2016-10-31 08:08:03 -05:00
Scott Lahteine 04a1fac029 Some cleanup to M43 2016-10-31 08:08:03 -05:00
Scott Lahteine 24f6612551 Reduce and optimize endstop_monitor code 2016-10-31 08:08:03 -05:00
Scott Lahteine b4444e91ae Reduce code and build size of PWM_details 2016-10-31 08:08:02 -05:00
Scott Lahteine dbe414ef03 Squash redundant code in PWM_status 2016-10-31 08:08:02 -05:00
Scott Lahteine af26d22741 Clean up some spacing and semantics 2016-10-31 08:08:02 -05:00
Bob-the-Kuhn 81397d7a9a EXTRUDER_x_AUTO_FAN name change to Ex_AUTO_FAN 
I stumbled across a name change that'll be used a lot so I'm updateing
the name list.
 2016-10-31 08:08:02 -05:00
Bob-the-Kuhn c7f1f0dae6 Add endstop monitor & make pins report pretty 2016-10-31 08:08:02 -05:00
Scott Lahteine d567b426d5 Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e 
Mightyboard Revision E preliminary support
 2016-10-31 08:01:41 -05:00
Scott Lahteine 43df9ace4e Merge pull request #5110 from thinkyhead/rc_z2_min_allowed 
Support Z2 min in M119 report
 2016-10-31 07:59:45 -05:00
Scott Lahteine 23f05f8be7 Use bit-length types in block_t 2016-10-30 16:16:29 -05:00
Scott Lahteine 8dc7807d85 Add support for CoreYZ to planner.buffer_line 2016-10-30 16:16:28 -05:00
Scott Lahteine 1cf878fdb1 Calculate dm and e-steps earlier in planner 2016-10-30 16:16:28 -05:00
Scott Lahteine 75dbb71dd7 Replace block.busy with a block.flag bit 2016-10-30 16:16:28 -05:00
Scott Lahteine c7f22f688f buffer_line can calculate while it's waiting 2016-10-29 17:08:42 -05:00
Scott Lahteine f3720f4e81 const arguments to test_dual_z_endstops 2016-10-29 16:01:27 -05:00
Scott Lahteine 8cebd2a7db Arrange Z2 min before Z2 max 2016-10-29 01:54:19 -05:00
Scott Lahteine accabf088a Add support for Z2 min endstop to M119 2016-10-29 01:54:02 -05:00
Scott Lahteine 396434a445 Fix compiler warning in M145 2016-10-28 20:57:36 -05:00
Scott Lahteine 8e787304c9 const float ref args in planner.h 2016-10-28 20:57:36 -05:00
Scott Lahteine 07bfc45df8 Adjust spacing in gcode_M149 2016-10-28 20:57:36 -05:00
Scott Lahteine 1a2310c494 Make LCD preheat vars an array to reduce code size 2016-10-28 20:57:36 -05:00
Scott Lahteine 1226ae1912 Some cleanup in ultralcd.h 2016-10-28 20:57:21 -05:00
Scott Lahteine 50ee749082 Centralize click-handling in the LCD loop 2016-10-28 20:57:21 -05:00
Scott Lahteine 47ad97c35e Merge pull request #5109 from thinkyhead/rc_eeprom_M218_tool_offset 
Save hotend_offset array (M218) in EEPROM
 2016-10-28 20:08:29 -05:00
Scott Lahteine bff6bbdb12 Indentation in configuration_store.cpp 2016-10-28 18:55:42 -05:00
Scott Lahteine 97115d56f9 Print error for M500 with disabled EEPROM 2016-10-28 18:53:48 -05:00
Scott Lahteine 67ab54185b Save hotend_offset array (M218) in EEPROM 2016-10-28 18:45:23 -05:00
MagoKimbra dfcdbb437b Fix Command M420 2016-10-28 20:53:48 +02:00
Scott Lahteine c34dbfb248 Merge pull request #5072 from thinkyhead/rc_preset_auto_fans 
Add predefined AUTO_FAN_PINs to pins files
 2016-10-27 17:12:11 -05:00
Scott Lahteine 9a23f73765 Don't trigger endstops that are actually Z2 or probe 2016-10-27 08:12:17 -05:00
Scott Lahteine c07cc9e3f1 Revert changes made to z dual endstop test 
#3631 broke z dual endstops. Solved by @Nocturnal42 in https://github.com/MarlinFirmware/Marlin/issues/5078#issuecomment-256572248
 2016-10-27 07:41:39 -05:00
Scott Lahteine c4c53856a4 Merge pull request #5094 from esenapaj/Fix-for-the-PR-#5088 
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
 2016-10-26 21:51:18 -05:00
Scott Lahteine 2e3110539b Merge pull request #5095 from thinkyhead/rc_fix_bilinear_math 
Fix bilinear grid constraints
 2016-10-26 21:48:19 -05:00
esenapaj d5a5042d23 Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL) 2016-10-27 10:32:20 +09:00
Scott Lahteine 9cbedab91b Use DPM where possible 2016-10-26 18:38:32 -05:00
Scott Lahteine ad38d91692 Sanity check that auto fan pins can do PWM 2016-10-26 18:38:32 -05:00
Scott Lahteine 95275eb9b3 Predefine auto fan pins in some pins files 2016-10-26 18:38:32 -05:00
Scott Lahteine 3f94b15cef Fix bilinear grid constraints 
Followup to #5090
 2016-10-26 18:11:26 -05:00
Scott Lahteine d439fb95f7 Sanity check for the renamed options 2016-10-26 17:51:26 -05:00
Scott Lahteine b6aa894893 Rename auto fan pins and add auto fan flags 2016-10-26 17:51:26 -05:00
Scott Lahteine ada935de87 Allow TEMP_STAT_LEDS with only one LED defined 2016-10-26 17:51:26 -05:00
Scott Lahteine 4b056d8184 Fix warning in ultralcd.cpp 2016-10-26 17:51:26 -05:00
Scott Lahteine 9dfd029911 Fix bug in fastio.h _GET_TIMER 2016-10-26 17:51:25 -05:00
esenapaj 8b1d90e281 Follow-up the PR #5087 (Fixed SERVO pins on Azteeg X3), etc 
・Add header
・Adjust spacing
 2016-10-27 06:46:03 +09:00
Scott Lahteine bfd3b3c604 Merge pull request #5087 from Fulg/azteeg-x3-pins 
Fixed SERVO pins on Azteeg X3
 2016-10-26 06:01:16 -05:00
Scott Lahteine 208d720614 Merge pull request #5082 from Fulg/RCBugFix 
Only issue MAXTEMP when heating
 2016-10-26 05:55:33 -05:00
Scott Lahteine f0d673561f Fix for bilinear grid outside bounds 2016-10-26 05:00:03 -05:00
Scott Lahteine 24bcea6c02 Merge pull request #5088 from thinkyhead/rc_break_m1_fix 
Handle M108 in M1 also with ULTIPANEL
 2016-10-26 00:44:01 -05:00
Scott Lahteine 1ba1ec0db9 Handle M108 in M1 also with ULTIPANEL 2016-10-25 23:25:47 -05:00
Scott Lahteine 7ad33422e3 Clear dir_t size, not pointer size 2016-10-25 22:59:40 -05:00
Benoit Miller 1c716034ec Fixed SERVO pins on Azteeg X3 2016-10-25 17:11:26 -04:00
Benoit Miller 2aa12d78dc Only issue MAXTEMP when heating 2016-10-24 17:09:29 -04:00
Scott Lahteine 3fcf915808 Fix uninitialized var in reset_acceleration_rates 2016-10-24 11:55:41 -05:00
Scott Lahteine 14f824c3de Merge pull request #5071 from esenapaj/Extend-measuring-range-of-thermocouple 
Extend measuring range of thermocouple for MAX31855
 2016-10-24 02:00:12 -05:00
Scott Lahteine 1097a50694 Merge pull request #5070 from gcormier/rcbugfix 
Fix #4995 - M48/G29 on CoreXY maybe others?
 2016-10-24 00:56:36 -05:00
Sebastianv650 c397b9d60a Planner acceleration bugfix and speedup v2 
.) Use already existing inverse_millimeters instead of /
block->millimeters.
.) Prevent overflow during acceleration calculation by checking if float
is necessary. Idea modified from Sailfish.
.) Save two uint32_t or even float multiplications by checking if
step[AXIS] has steps and if max acceleration is lower than accel. If
not, there is no need to check this axis.
 2016-10-23 12:47:46 +02:00
esenapaj 70e287ca8c Extend measuring range of thermocouple for MAX31855 2016-10-23 10:22:39 +09:00
Greg Cormier f0aed9dac7 Fix #4995 - M48/G29 on CoreXY maybe others? 2016-10-22 20:45:13 -04:00
esenapaj e50992694f Fix for the PR #5066 (Updated french translation) 
MSG_INFO_PRINT_TIME is still being used
 2016-10-23 06:09:56 +09:00
Scott Lahteine 483082387c Merge pull request #5022 from esenapaj/Fix-for-the-PR-#4553 
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
 2016-10-22 13:54:09 -05:00
Scott Lahteine 8b967a9ff0 Merge pull request #5058 from thinkyhead/rc_reverse_arrow_buttons 
Apply encoder reverse options to keypad arrows
 2016-10-22 13:52:35 -05:00
esenapaj 523c7eaa6c Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD)) 2016-10-23 03:29:00 +09:00
Scott Lahteine ca48a49fdb Merge pull request #5065 from petrzjunior/transl 
[LANGUAGE] Update Czech (BLTOUCH and DAC strings)
 2016-10-22 12:46:10 -05:00
Scott Lahteine f0744fc815 Merge pull request #5066 from thinkyhead/rc_french_update 
Updated french translation
 2016-10-22 12:45:51 -05:00
Gege2B 88b7f6eb46 Updated french translation 2016-10-22 12:30:22 -05:00
Scott Lahteine 3544c3632f Merge pull request #5062 from thinkyhead/rc_warnings_fix 
Warnings fixed redux
 2016-10-22 12:21:36 -05:00
Petr Zahradník junior 8323d78ed7 Translated BLTOUCH and DAC strings 2016-10-22 19:12:21 +02:00
Scott Lahteine e151f952a3 Apply encoder reverse options to keypad arrows 2016-10-22 11:51:33 -05:00
Scott Lahteine cfb47929ca Merge pull request #5060 from thinkyhead/rc_fix_ugly_code 
Reduce, clean up MINTEMP / MAXTEMP test code
 2016-10-22 11:27:30 -05:00
Josef Pavlik dca50737f5 fixed warning: ISO C++ forbids compound-literals 2016-10-22 11:23:16 -05:00
Josef Pavlik 0bd66807b2 fixed warning: extra ; 2016-10-22 11:12:29 -05:00
Josef Pavlik d35dc407a8 fixed warning: ISO C99 requires rest arguments to be used 2016-10-22 11:12:29 -05:00
Josef Pavlik c2b51af3ba fixed warning: ISO C does not permit named variadic macros 2016-10-22 11:12:29 -05:00
Scott Lahteine 0d3fc7dd89 Merge pull request #5059 from gcormier/fixbaby 
Set defer delay back to false when exiting babystepping.
 2016-10-22 10:59:17 -05:00
Scott Lahteine f888597197 Reduce, clean up code for mintemp/maxtemp tests 2016-10-22 10:31:03 -05:00
Scott Lahteine ad64723354 Move MAX_EXTRUDERS to pins.h 2016-10-22 10:07:51 -05:00
Scott Lahteine 5f5a55a0de Add a ZERO macro to clear arrays 2016-10-22 10:07:18 -05:00
Greg Cormier 0009725637 Set defer delay back to false when exiting babystepping. 2016-10-22 09:43:30 -04:00
Scott Lahteine 627f9d5285 Merge pull request #5056 from thinkyhead/rc_lin_adv_opt 
LIN_ADVANCE optimizations
 2016-10-22 07:06:39 -05:00
Scott Lahteine 0908329d96 Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical 
Fix manual leveling coordinates
 2016-10-22 06:31:02 -05:00
Scott Lahteine 14e60f0d3b Correct typo in configs 
As pointed out by #5044
 2016-10-22 05:56:32 -05:00
Scott Lahteine 1165e83263 MBL coordinates are logical 2016-10-22 05:55:44 -05:00
Scott Lahteine dbfabb4c0a Merge pull request #5043 from Kaibob2/patch-5 
Correct grammar and translation in language_de.h
 2016-10-22 05:52:54 -05:00
Scott Lahteine b19bba275f No LCD timeout during babystepping 
As requested in #5031
 2016-10-22 05:26:07 -05:00
Scott Lahteine b9109b2875 Improve LIN_ADVANCE commentary (all configs) 2016-10-22 05:03:09 -05:00
Sebastianv650 9818d97587 Fix Z-hops during retract/prime lead to blobs 
We don't want to have retract/prime movements done with LIN_ADVANCE, that's also true with simultaneously executed Z-hops.
 2016-10-22 04:54:59 -05:00
Sebastianv650 599649e45d Add formula for LIN_ADVANCE_K 
With this formula, a start value for K for further fine-calibration can be calculated.
 2016-10-22 04:54:59 -05:00
Scott Lahteine be7d245eff Merge pull request #5008 from thinkyhead/test_endstop_hits 
Save some PROGMEM in MBL G28
 2016-10-22 03:35:52 -05:00
Scott Lahteine 7c0e52256d Merge pull request #5053 from thinkyhead/rc_fix_baud_config 
Patch BAUDRATE line in configs
 2016-10-22 03:27:45 -05:00
Scott Lahteine 2783dcb4cc Save some RAM in MBL's G29 2016-10-22 02:52:56 -05:00
Scott Lahteine 4f5a8c05d5 Tweaks to endstops macros 2016-10-22 02:52:56 -05:00
Scott Lahteine 083d41a2c2 Remove redundant estep rate code from LIN_ADVANCE 
As noted by https://github.com/MarlinFirmware/Marlin/pull/4971#issuecomment-252503295
 2016-10-22 02:19:14 -05:00
Scott Lahteine 4f6bfabaad Patch BAUDRATE line in configs 2016-10-22 00:48:52 -05:00
Kai 2bfedb74d5 Correct grammar and translation in language_de.h 
Made Filament change Text sound like correct german.
 2016-10-19 14:56:46 +02:00
esenapaj 1e1edeadd3 Fix for the commit dc2cb84 (Revert acceleration limiting to avoid overflow) 
・Add forgotten '\'
 2016-10-18 18:07:20 +09:00
Scott Lahteine dc2cb8454c Revert acceleration limiting to avoid overflow 2016-10-17 17:08:41 -05:00
Scott Lahteine 6ae5cf17a9 Merge pull request #5033 from esenapaj/Fix-freezing-with-MAX31855 
Fix freezing and MINTEMP Error with MAX31855 thermocouple
 2016-10-17 16:22:20 -05:00
Scott Lahteine f257c4bcae Merge pull request #5036 from thinkyhead/rc_dac_code_deps 
Fix DAC current code
 2016-10-17 16:19:00 -05:00
Scott Lahteine b80cc0cbb5 Fix DAC current code 2016-10-17 15:17:57 -05:00
esenapaj 385bd8a4a3 Fix freezing and MINTEMP Error with MAX31855 thermocouple 2016-10-16 07:33:14 +09:00
Scott Lahteine ca7275a67a Disable EXTRAPOLATE_FROM_EDGE by default 2016-10-14 14:44:28 -05:00
Scott Lahteine 0921c7da84 Merge pull request #4997 from thinkyhead/rc_jerk_from_mk2 
Adapt Jerk / Speed code from Prusa MK2
 2016-10-12 06:38:50 -05:00
Scott Lahteine 4d89652bc2 Apply minor optimizations to planner.cpp 2016-10-12 04:42:15 -05:00
Scott Lahteine 1092319b19 Adapt speed/jerk code based on Prusa MK2 branch 2016-10-12 04:42:14 -05:00
Scott Lahteine 37643fef63 Merge pull request #4972 from bgort/platformio-improvements 
Move platformio directories out of source tree
 2016-10-12 03:42:33 -05:00
Scott Lahteine 8e1cc9332a Replace block flag bools with flag bits 
…and apply const to some method parameters
 2016-10-10 23:17:49 -05:00
Scott Lahteine d41f2bdbd8 Merge pull request #4991 from thinkyhead/rc_max31855_fix 
Patches for Stepper DAC and MAX31855
 2016-10-10 20:12:06 -05:00
Scott Lahteine e7cf566fc5 Do kinematic segments with buffer_line_kinematic 
This breaks the raw option, but in the future perhaps all planner moves
will be sent in raw form instead of logical.
 2016-10-10 17:14:03 -05:00
Scott Lahteine a10e81dc2a Minor cleanup of set_bed_leveling_enabled 2016-10-10 17:14:03 -05:00
Scott Lahteine 029824bc49 Patch ADJUST_DELTA macro for SCARA 2016-10-10 17:14:03 -05:00
Scott Lahteine 5ce5a9c822 Marlin: planner.h tweak 2016-10-10 17:14:03 -05:00
Scott Lahteine d963020532 Sort out some header dependencies 2016-10-10 17:14:03 -05:00
Scott Lahteine e17f9b8b99 DAC patches 
As suggested by #4985
 2016-10-10 14:08:04 -05:00
Scott Lahteine 2cb5df8a56 Merge pull request #4984 from esenapaj/Small-fix-for-PR-#4980 
Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization)
 2016-10-10 13:30:47 -05:00
Scott Lahteine b6221df3f3 Merge pull request #4983 from MarlinFirmware/revert-4933-rc_drop_pid_func_range 
Revert "Removal of PID functional range"
 2016-10-10 13:29:54 -05:00
Scott Lahteine a07033a6c1 Merge pull request #4974 from esenapaj/Follow-up-the-PR-#4955 
Fix and follow-up the PR #4955 (PINS_DEBUGGING and M43: Read pin states), etc
 2016-10-10 13:27:52 -05:00
Scott Lahteine f8199b2cc1 Merge pull request #4982 from thinkyhead/rc_abl_bugfix 
Fix planner with kinematics, delta ABL
 2016-10-10 13:24:22 -05:00
esenapaj f41c60d4a4 Follow-up the PR #4955, etc 
・More ANALOG NUMBERING to Analog Input
・Add comment header to all the section of all the pins files

・Sort sections as follows:
1. Some special definitions (USBCON, LARGE_FLASH, etc)
2. Servos
3. Limit Switches
4. Z Probe
5. Steppers
6. Temperature Sensors
7. Heaters / Fans
8. Misc. Functions
9. LCD / Controller

・Move MAX6675_SS into "Temperature Sensors" section
・Adjust spacing
 2016-10-10 14:22:43 +09:00
esenapaj 00456b0cb3 Fix compilation errors 2016-10-10 14:22:43 +09:00
esenapaj cfb5c24bc9 Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization) 
・Fix a comment about timer
 2016-10-10 07:48:42 +09:00
Scott Lahteine 149b8d9e4b Handle MAX31855 error conditions 2016-10-09 17:12:50 -05:00
Scott Lahteine f4ec265363 Fix a typo 2016-10-09 16:45:29 -05:00
Scott Lahteine 4ec2d459e6 Fix mcp4728_setVref_all as followup to #4967 2016-10-09 16:45:00 -05:00
Scott Lahteine 1e551c0688 Revert "Squashed - Removal of PID functional range" 2016-10-09 16:27:45 -05:00
Scott Lahteine 4037df82b0 Merge pull request #4981 from esenapaj/Update-Japanese-language 
Update Japanese translation, etc
 2016-10-09 16:11:53 -05:00
Scott Lahteine e4e290d957 Make EXTRUDER_RUNOUT_PREVENT kinematic compatible 2016-10-09 15:58:33 -05:00
Scott Lahteine 847429eff4 Make tool_change kinematic compatible 2016-10-09 15:58:32 -05:00
Scott Lahteine a4a7ca10ca Make USE_DELTA_IK_INTERPOLATION compatible with ABL 2016-10-09 15:58:32 -05:00
Scott Lahteine c5cac486f5 Use a, b, c instead of lx, ly, lz 2016-10-09 14:34:24 -05:00
Josef Pavlik f8c2473a71 Improve planner kinematics, fix delta ABL 2016-10-09 13:32:46 -05:00
Scott Lahteine 48761f2021 Patch delta endstop adjustment config 2016-10-09 13:32:45 -05:00
Josef Pavlik 28d41b48e3 delta endstop adjustment configurable 2016-10-09 13:09:34 -05:00
Scott Lahteine ff6b23cb0f Fix an issue with shifted LCD lines 2016-10-09 13:00:00 -05:00
Scott Lahteine e4d2662d81 Use some macros in M48 2016-10-09 12:21:05 -05:00
Scott Lahteine 3752d9aca8 Fix timer comments 2016-10-09 12:11:00 -05:00
Sebastianv650 a448cedbc5 LIN_ADVANCE bug fix and optimization 
.) long to int: Extruder stalls at 10kHz / 20kHz step limits with long.
.) Take the delta_adv_steps calculation out of the step_loops loop. Wasted calculation performance if done inside.
.) >> 2 replaced by 3: Is divide by 8. Reason: Timer 0 runs at 16/8=2MHz, Timer 1 at 16/64=0.25MHz. ==> 2/0.25=8.
 2016-10-09 11:55:02 -05:00
esenapaj b27080c1dd Update Japanese translation 
・Add new translation
 2016-10-10 01:52:51 +09:00
esenapaj 0780146034 Move DAC section from inside of the changing filament section 2016-10-10 01:17:46 +09:00
Brian 9c0404eae4 Move platformio directories out of source tree 2016-10-08 13:45:26 -04:00
Scott Lahteine a1b50f1102 Cleanup of code style 2016-10-07 15:57:24 -05:00
jaysonkelly 13c9dcc600 Add LCD menu for DAC 2016-10-07 15:13:03 -05:00
Scott Lahteine 00261cbfcb Merge pull request #4933 from thinkyhead/rc_drop_pid_func_range 
Squashed - Removal of PID functional range
 2016-10-07 15:07:55 -05:00
Scott Lahteine ee01def16d Merge pull request #4955 from thinkyhead/rc_debug_pins 
PINS_DEBUGGING and M43: Read pin states
 2016-10-07 14:47:34 -05:00
Scott Lahteine a0df34fd4c Add PINS_DEBUGGING advanced config option 2016-10-07 14:20:13 -05:00
Scott Lahteine e21bab5243 PINS_DEBUGGING and M43 Read Pins 2016-10-07 14:11:48 -05:00
Scott Lahteine 3c97fa6e29 Merge pull request #4963 from esenapaj/Fix-for-advance-algorithm 
Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()
 2016-10-07 00:33:42 -05:00
Scott Lahteine 48e63c4730 Comment some globals 2016-10-06 22:06:33 -05:00
Scott Lahteine 9a6c66602f Fix formatting of extrapolate debug output 2016-10-06 17:04:22 -05:00
Scott Lahteine cd77eb5c40 Clear grid for bilinear G29 2016-10-06 17:00:53 -05:00
Scott Lahteine 53a0856f5c Print Y as int in print_bed_level 2016-10-06 16:46:54 -05:00
esenapaj f8df88f271 Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr() 2016-10-07 02:01:29 +09:00
Brian 357854a7ef tweak variables; 2016-10-05 19:49:05 -04:00
Brian 48cf19151a Improve M48 output; Add min, max, range, etc. 2016-10-05 16:09:39 -04:00
Scott Lahteine c63cb45268 Fix thermal runaway timeout 2016-10-05 08:42:39 -05:00
Scott Lahteine e6164d254d Clean up GCode command short comments 2016-10-05 06:13:30 -05:00
Scott Lahteine 47bd142b29 Should marlinAnalogInputToDigitalPin use analogInputToDigitalPin? 2016-10-05 06:13:30 -05:00
Scott Lahteine bd8520e61d Label analog pins in a similar way 
Some other pins formatting also
 2016-10-05 06:13:30 -05:00
Scott Lahteine 0c0deb5194 Common pin_is_protected function 2016-10-05 04:41:27 -05:00
Scott Lahteine 49d77720d5 More support for 4th extruder or heater 2016-10-05 04:40:22 -05:00
Scott Lahteine 46839c222a Comment and clean up some vars 2016-10-04 23:40:45 -05:00
Scott Lahteine 8910bb7c97 Fix buzzer conditional compile 2016-10-04 21:38:41 -05:00
Scott Lahteine de7e798e6f Replace single-char S_ECHOs with S_CHAR 2016-10-04 21:38:41 -05:00
Scott Lahteine 0e83f34174 Tweak debugging of probe_pt 2016-10-04 21:38:00 -05:00
Scott Lahteine cc02f6edf8 Merge pull request #4943 from esenapaj/Small-update-of-language_kana_h 
Small update of language_kana.h
 2016-10-04 03:21:57 -05:00
Scott Lahteine ca26011e3c Merge pull request #4941 from MagoKimbra/rc_fix_M205 
Add note for M205
 2016-10-04 03:21:20 -05:00
Scott Lahteine 9485aa8f13 Include negative Z probe offset in clearance move 2016-10-03 16:18:04 -05:00
Scott Lahteine 5c1eb595e6 Fix for G2/G3 negative radius 
As suggested in #4940
 2016-10-03 14:48:44 -05:00
esenapaj f09ae96f28 Small update of language_kana.h 2016-10-03 23:41:39 +09:00
MagoKimbra 7b37539fe7 Add note for M205 2016-10-03 08:54:15 +02:00
Scott Lahteine d5f598cd82 Tweak probe debug, add newline 2016-10-02 17:35:40 -05:00
Scott Lahteine c592ccb6f5 Patch max_jerk[Z] menu item 2016-10-02 10:12:47 -05:00
Scott Lahteine d80a79eb77 Use right-shift instead of / 2, why not? 2016-10-02 07:01:40 -05:00
Rerouter 02fe9cf558 Removal of functional range constraint 
Also lined up the >> 1 and / 2 mentioned earlier in the unconstrained I term issue,
 2016-10-02 07:01:40 -05:00
Rerouter 5f5d87cad3 Update Configuration.h 2016-10-02 07:01:40 -05:00
Scott Lahteine 761593b74b Cleanup some vars, use of min/max 2016-10-02 06:34:56 -05:00
Scott Lahteine d19cfcfc1d max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK 2016-10-02 06:34:56 -05:00
Scott Lahteine e7dc174f30 More detailed debugging of G28 delta 2016-10-02 02:18:57 -05:00
Scott Lahteine 473f4a17a8 Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp 
Pid unconstrained itemp
 2016-10-01 06:58:07 -05:00
Scott Lahteine bad8899ebc Merge pull request #4900 from thinkyhead/rc_g38_changes 
Cleanup of G38.2 / G38.3
 2016-10-01 06:57:17 -05:00
Scott Lahteine 73ce3a61c7 Cleanup, comment zigzag 2016-10-01 05:21:52 -05:00
Scott Lahteine 0d538f3db6 Add to all configurations 2016-10-01 05:00:53 -05:00
Scott Lahteine 919fe3e4b8 Rename feature to G38_PROBE_TARGET 2016-10-01 05:00:53 -05:00
Scott Lahteine a2864ab7fe Patched up, cleaned up 2016-10-01 05:00:53 -05:00
Bob-the-Kuhn 2911aa7ffa code changes to implement G38 commands 
1) modified 3 code files
Marlin.h
Marlin_main.cpp
endstops.cpp

2) modified config files so I could test on my machine

Testing was done on an AzteegX3pro based machine.

The probe was hooked to the Z_MIN endstop.

My controller doesn't have a dedicated Z_PROBE input so I couldn't test
that functionality.

Verified that a large file (without any G38 commands) executed the same
before and after the changes.

Verified that the head moves as expected when G38.2 and G38.3 commands
are issued. Single & multiple axis moves were tested along with + and -
directions.

Code was added to the main ISR. In normal operation only one extra IF
statement is evaluated. I didn't notice any performance degradation
because of the added code.

The G38 commands are expected to be issued manually by the operator
during machine setup. The G38 commands wait until the machine is idle
before proceeding. That way the other commands are minimally impacted
by the extra ISR overhead when a G38 command is in the queue.

The G38 commands are very similar to the G28 commands except 1) only the
Z_PROBE is used and movement can be in the + or - direction.

See issue 4677 for a discussion on adding G38 commands to Marlin.
Feature request: add ability to use G38.2 command (CNC)
MarlinFirmware/Marlin#4677
 2016-10-01 05:00:53 -05:00
Scott Lahteine 74d048e77e Merge pull request #4927 from thinkyhead/rc_bltouch_noraise 
Don't check Z_MAX on raise when the probe pwns the pin
 2016-10-01 04:52:56 -05:00
Scott Lahteine 4afa293289 Say "BLTOUCH" in machine info report 2016-09-30 17:13:27 -05:00
Scott Lahteine ed7d2694fc Don't check Z_MAX on raise when the probe pwns the pin 2016-09-30 16:41:30 -05:00
Scott Lahteine 3bbdd48a4d Merge pull request #4918 from thinkyhead/rc_abl_patchups 
Fix up ABL - Add PROBE_Y_FIRST option. Arduino 1.6.8 required.
 2016-09-29 15:29:01 -05:00
Scott Lahteine fffc9fefa8 Apply changes to all configs 2016-09-29 02:17:33 -05:00
Scott Lahteine 587cb6c283 K8400 has 1xXY an 2xZ endstop plugs 2016-09-29 02:07:22 -05:00
Scott Lahteine d234bc160e Require Arduino 1.6.8 to compile 2016-09-29 02:00:27 -05:00
Scott Lahteine 2d2c9bdf92 Add PROBE_Y_FIRST option for probe order 2016-09-29 02:00:27 -05:00
Scott Lahteine c8c57e59fc Patch the end of G29 to sync plan position 2016-09-29 02:00:27 -05:00
Scott Lahteine 81b8c9f8ec Add XY parameters to G29 for mesh dimensions 2016-09-29 02:00:27 -05:00
Scott Lahteine 56cf674150 M420 can now enable/disable ABL 2016-09-29 02:00:26 -05:00
Scott Lahteine 06790977c4 Use updated position methods 2016-09-29 01:31:05 -05:00
Scott Lahteine e8f2604a6f Patch print_bed_level numbering 2016-09-29 01:31:05 -05:00
Scott Lahteine d066610514 Patch up bilinear_z_offset 2016-09-29 01:31:05 -05:00
Scott Lahteine 850e38d013 G30 will only disable bed leveling 2016-09-29 01:31:04 -05:00
Scott Lahteine 510ef5d14a Standard function to turn bed leveling on/off 2016-09-29 01:27:37 -05:00
Scott Lahteine ecf7cdde65 Augment planner/stepper getters/setters 2016-09-29 01:27:37 -05:00
Scott Lahteine 2febd8ec82 Double-touch debugging 2016-09-29 01:27:37 -05:00
Scott Lahteine b331077c32 Use stepper.get_axis_position_degrees 2016-09-29 01:27:37 -05:00
Scott Lahteine 0d9efb24f3 Fix up bilinear_z_offset 2016-09-29 01:26:22 -05:00
jaysonkelly 3b3d282f8e Adjusted values for Rigidboard Configuration 
Rigidboard differs a little in configuration from the PrinterBoardRevF we modeled the code after.
 2016-09-28 14:14:04 -05:00
Scott Lahteine 850259bb25 Watch bed temp also for Control menu item 2016-09-28 14:14:04 -05:00
esenapaj 92c03a44a9 Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. 
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents

・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h

・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section

・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h

Adjust spacing

About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA

Adjust spacing
 2016-09-28 14:14:04 -05:00
Rerouter 50e5ee4de4 Update Configuration.h 2016-09-28 17:38:09 +10:00
Rerouter 1a2f1d4974 Update temperature.cpp 2016-09-28 17:36:53 +10:00
Rerouter a765c98850 Removal of the constraints of the Iterm 2016-09-28 17:26:49 +10:00
Scott Lahteine 8b46eb3766 Fix bilinear interpolation 2016-09-27 03:18:49 -05:00
Scott Lahteine 5100bdac81 Improve Bilinear Grid 
- Extrapolate properly for even numbered grid points
- Extrapolate using average, not median
- Improve bilinear grid report output
- Add debug output for bilinear extrapolation
- Add option to extrapolate from edge, not center
 2016-09-27 00:03:19 -05:00
Scott Lahteine a3e91ec65e Add 'Q' option to G29 when debug leveling is on 2016-09-27 00:03:19 -05:00
Scott Lahteine 1fceda4fb0 Add leveling type and details to machine_info 2016-09-27 00:03:19 -05:00
Scott Lahteine e0e0166075 Fix auto bed leveling - turn on after successful G29 2016-09-27 00:03:19 -05:00
Scott Lahteine 18e40de39c Adjust final Z after bilinear G29 2016-09-26 00:22:22 -05:00
Scott Lahteine ea0dbee3c9 Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
Scott Lahteine 9cebbabd05 Merge pull request #4893 from thinkyhead/rc_stat_led_check 
Define status LED pins without condition
 2016-09-25 18:50:47 -05:00
Scott Lahteine 5fff8d148b Clean up digital pots and microsteps 2016-09-25 11:16:22 -05:00
Scott Lahteine 570676d265 Include requirements in "Implemented Codes" 2016-09-25 07:50:33 -05:00
Scott Lahteine cb48292338 Use fastio for literal pins 2016-09-25 06:33:38 -05:00
Scott Lahteine 07703d2bd6 Use _PIN suffix on some pins 2016-09-25 06:33:38 -05:00
Scott Lahteine 203e519bf4 Sanity check for status LED pins 2016-09-25 06:33:38 -05:00
Scott Lahteine ba43277429 Always define status LED pins 2016-09-25 06:33:37 -05:00
Scott Lahteine ad691022d7 Fix up spacing in A4JP pins 2016-09-25 06:33:37 -05:00
Scott Lahteine fba0b67f7d Rename status led pins 2016-09-25 06:33:37 -05:00
Scott Lahteine 9d86c07702 Clean up some fastio.h spacing 2016-09-25 06:33:37 -05:00
Scott Lahteine ab84ed22ca No such thing as G6 and G7 pins 2016-09-25 05:28:22 -05:00
Scott Lahteine c2f13be750 Mightyboard Revision E 2016-09-25 05:28:04 -05:00
Scott Lahteine 041d127cd3 Match bltouch test in do_homing_move with new code 2016-09-24 23:58:08 -05:00
Scott Lahteine 16461900c2 Fix for HEATERS_PARALLEL 2016-09-24 05:34:40 -05:00
Scott Lahteine 1583d37edd Comment on M851 case 2016-09-24 05:34:36 -05:00
Scott Lahteine 076f3a8284 unsigned char => uint8_t 2016-09-24 05:23:40 -05:00
Scott Lahteine 8935bed594 MIDDLE_DEAD_ZONE => MIDDLE_DEAD_ZONE_R 2016-09-24 05:18:36 -05:00
Scott Lahteine 6cf0952bf9 Merge pull request #4887 from thinkyhead/rc_autumn_fixups 
Improve MINIMUM_STEPPER_PULSE
 2016-09-24 03:23:42 -05:00
Scott Lahteine 8061f1fac9 Merge pull request #4888 from thinkyhead/fix_warnings_etc 
Suppress warnings, fix nonlinear_z_offset
 2016-09-24 03:22:49 -05:00
esenapaj 7bdc58a818 Suppress warnings, fix nonlinear_z_offset 2016-09-24 03:06:08 -05:00
Scott Lahteine eabff30e75 Improve MINIMUM_STEPPER_PULSE 2016-09-24 02:23:43 -05:00
esenapaj 3ed8f8331c Update Japanese translation 
・Add new translation
 2016-09-24 09:24:38 +09:00
Scott Lahteine da1644313d Merge pull request #4883 from esenapaj/Follow-up-the-PR-#4860 
Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)
 2016-09-23 16:39:37 -05:00
Scott Lahteine 903b8bb60c No need for auto_bed_leveling_was_enabled 2016-09-23 16:38:22 -05:00
esenapaj ee60225c07 Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY) 2016-09-24 06:18:27 +09:00
Scott Lahteine 0951bffcc0 Sanity check homing bumps 2016-09-23 15:39:02 -05:00
Scott Lahteine a9a21db39f No homing bump if bump distance is 0 (or less) 2016-09-23 15:39:02 -05:00
Scott Lahteine 2b4da57ea7 Patch Z safe homing for probe Z homing 2016-09-23 15:39:02 -05:00
Scott Lahteine c6dd539c84 Print error for M42 bad pin 2016-09-23 15:39:02 -05:00
Scott Lahteine 8b399610fb Skip raw moves to current position 2016-09-23 15:39:02 -05:00
Scott Lahteine 22ece0081e Pass array pointer to unapply_leveling 2016-09-23 15:39:01 -05:00
Scott Lahteine cbc158eb62 Add a proper flag for ABL enabled 2016-09-23 15:39:01 -05:00
Scott Lahteine 666e944336 Init xProbe/yProbe for compiler 2016-09-23 15:39:01 -05:00
Scott Lahteine 2c52e6ecf4 Clean up G28 MBL code 2016-09-23 15:39:01 -05:00
Scott Lahteine 0bf1054bb2 Patch do_homing_move for SCARA 2016-09-23 15:39:00 -05:00
Scott Lahteine 6ad0da661c Report position in G92 2016-09-23 15:39:00 -05:00
Scott Lahteine 199a7b5dd5 Tweak SCARA debugging 2016-09-23 15:39:00 -05:00
Scott Lahteine 865ad25781 Fix prepare_kinematic_move_to precision 2016-09-23 15:39:00 -05:00
Scott Lahteine 85e607153b Improve kinematic optimization options 2016-09-23 03:03:15 -05:00
Scott Lahteine 2846531f0b const argument in do_homing_move 2016-09-23 03:03:15 -05:00
Scott Lahteine cc639d7d9c Less indentation in Stepper::isr 2016-09-23 03:03:14 -05:00
Scott Lahteine 7dec8071b2 Always synchronize in Stepper::set_position 2016-09-23 03:03:14 -05:00
Scott Lahteine c6142aa2a1 Minor cleanups in Marlin_main.cpp 2016-09-23 03:03:14 -05:00
Scott Lahteine 0427f3cc3b Use memcpy/memset in planner 2016-09-23 03:03:14 -05:00
Scott Lahteine 6b9bf8e8fe Add Planner::sync_from_steppers 
Use to sync the planner after an interrupted move (when not overriding
the logical position).
 2016-09-23 03:03:14 -05:00
Scott Lahteine be11a8a938 Fix debug in Planner::buffer_line 2016-09-23 03:03:13 -05:00
Scott Lahteine b211df818e Make movement functions more available 2016-09-23 03:03:13 -05:00
Scott Lahteine 6335acbf5c Patch bug in linear unapply_leveling 2016-09-23 03:03:13 -05:00
Scott Lahteine e8d5073a90 Use probe clearance for bump when homing Z with probe 2016-09-22 15:41:28 -05:00
Scott Lahteine dbe41245f1 Merge pull request #4821 from thinkyhead/rc_revert_to_raises 
Z Raise/Clearance rather than Height
 2016-09-22 15:30:07 -05:00
Scott Lahteine 747a2257dd Only deploy/stow BLTOUCH on downward move 2016-09-22 15:26:19 -05:00
Scott Lahteine e242946ac3 Patch G29 for linear leveling, reachable with probe 2016-09-22 15:26:19 -05:00
Scott Lahteine b800eb0fed Add probe option to position_is_reachable 2016-09-22 15:26:19 -05:00
Scott Lahteine fafafcf9d1 Use unapply_leveling in set_current_from_steppers_for_axis 2016-09-22 15:26:18 -05:00
Scott Lahteine e69d1e2879 Homing/probing feedrate, comments 2016-09-22 15:26:18 -05:00
Scott Lahteine 7d72ed688c Revert motor_current_setting to constexpr 
We should use `constexpr` wherever it makes sense, for its added benefits. See http://stackoverflow.com/questions/13346879/const-vs-constexpr-on-variables
 2016-09-22 15:26:18 -05:00
Scott Lahteine 145d9005d1 Fix BLTOUCH string and SERVO_DELAY 2016-09-21 01:45:23 -05:00
Scott Lahteine 2b7cc27c37 Merge pull request #4840 from thinkyhead/rc_G2_G3_arc_r_method 
Add support for G2/G3 with R parameter
 2016-09-21 01:30:37 -05:00
Scott Lahteine e0e10e0e45 Merge pull request #4859 from thinkyhead/rc_kinematic_and_scara 
Kinematic and SCARA patches
 2016-09-21 01:21:49 -05:00
Scott Lahteine 31f03c838a Only deploy/stow BLTouch for Z axis 2016-09-21 00:54:54 -05:00
Scott Lahteine 3913e04ac7 Add Delta kinematic optimization options 2016-09-20 18:48:06 -05:00
Scott Lahteine 8e31640229 Optimize prepare_kinematic_move_to 2016-09-20 18:48:06 -05:00
Scott Lahteine fd9b8ae4d4 Use position_is_reachable in G29, M48 2016-09-20 18:48:06 -05:00
Scott Lahteine 7194e4434f SCARA support in position_is_reachable 2016-09-20 18:48:06 -05:00
Scott Lahteine 1c5f9821c4 SCARA support in homeaxis 2016-09-20 18:48:05 -05:00
Scott Lahteine 92b4459f6c Simpler G92 for SCARA 2016-09-20 18:48:05 -05:00
Scott Lahteine 46cc2e3f6a Fix get_cartesian_from_steppers 2016-09-20 18:31:36 -05:00
Scott Lahteine 435c3ed404 Patch SCARA_move_to_cal for coordinate space 2016-09-20 18:31:36 -05:00
Scott Lahteine 5efb12e889 Simpler report_current_position for SCARA 2016-09-20 18:31:36 -05:00
Scott Lahteine 83fc5e1540 No line_to_* functions with IS_KINEMATIC 2016-09-20 18:31:36 -05:00
Scott Lahteine 59d39d7655 G0 direct move for SCARA 2016-09-20 18:31:36 -05:00
Scott Lahteine ad9d6870ed SCARA support in do_blocking_move_to 2016-09-20 18:31:36 -05:00
Scott Lahteine 8542ebcecd prepare_move_to_destination_raw => prepare_uninterpolated_move_to_destination 2016-09-20 18:31:36 -05:00
Scott Lahteine f900f97611 Update sw endstops in set_axis_is_at_home 2016-09-20 18:31:36 -05:00
Scott Lahteine 0d43cef1de M206 for MORGAN_SCARA 2016-09-20 18:31:36 -05:00
Scott Lahteine e94cb7a380 MORGAN_SCARA kinematics 2016-09-20 18:31:36 -05:00
Scott Lahteine 890bade2fa Additions, mods to SCARA config 2016-09-20 18:31:36 -05:00
Scott Lahteine 01f1028510 Try on "CLEARANCE" for size 2016-09-20 18:29:49 -05:00
Scott Lahteine 0e7d638a7a Revert to Probe Raise rather than Probe Height 2016-09-20 18:29:49 -05:00
Scott Lahteine 51e42a2d77 Adjust BLTouch probe behavior 
Addressing #4855
- Have the pin deploy only immediately before probing
- Have the pin retract immediately after every probe
 2016-09-20 16:20:36 -05:00
Scott Lahteine 13523cbf29 Fix and extend BLTouch support 2016-09-20 16:20:36 -05:00
Scott Lahteine 5cbed13f41 'constexpr' => 'const' for PWM_MOTOR_CURRENT 2016-09-20 15:57:48 -05:00
Scott Lahteine 7ae351c92f Merge pull request #4842 from thinkyhead/rc_DISABLE_Z_MIN_PROBE_ENDSTOP_whassup 
Drop DISABLE_Z_MIN_PROBE_ENDSTOP, clean up probe config
 2016-09-20 12:16:51 -05:00
Scott Lahteine ba94c89e21 Merge pull request #4852 from esenapaj/Fix-for-advance-extrusion-algorithms 
Fix for advance extrusion algorithms
 2016-09-20 11:33:14 -05:00
esenapaj 954563d603 Adjust spacing 2016-09-20 19:35:44 +09:00
esenapaj 7e9576dc5b Extend the e_steps[] from int to long for allowing more than 32,767 E steps 
Probably needed for long straight lines when using high microstepping
 2016-09-20 19:35:44 +09:00
esenapaj b04ed8f9c3 Fix inverted stepper signal of ADVANCED and LIN_ADVANCED 2016-09-20 19:35:44 +09:00
esenapaj 8692748ecd Fix broken direction signal of ADVANCED and LIN_ADVANCED 
Remove a setting proccess of E direction in advance_isr()
 2016-09-20 19:35:44 +09:00
Scott Lahteine e9ce42353e Patch G29 for 3-point leveling 2016-09-20 04:46:41 -05:00
Scott Lahteine c2744d8a8b Add support for G2/G3 with R parameter 2016-09-19 00:35:09 -05:00
Scott Lahteine e05af606a8 Clean up probe config options 2016-09-19 00:26:16 -05:00
Scott Lahteine 153e240cdd Probe conditionals to Conditionals_LCD.h 2016-09-19 00:25:53 -05:00
Scott Lahteine ff38a3c3b1 Use SD Detect Pin 53 for 3DRAG, K8200, and K8400 
See #4316
 2016-09-18 23:46:09 -05:00
Scott Lahteine f38a33a5d8 Add handling of BLTouch error state 2016-09-18 22:00:32 -05:00
Scott Lahteine c4dcfa254e Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH 2016-09-18 22:00:32 -05:00
Scott Lahteine 7d9ebda478 Remove redundant servo probe sanity check 2016-09-18 21:46:18 -05:00
Scott Lahteine f0beae7641 Fix stupid, stupid, stupid oversight in G29 update 
Mea culpa!
 2016-09-18 16:24:47 -05:00
Scott Lahteine 77639672d7 Move NONLINEAR bed leveling to planner 
This is in advance of moving non-linear bed leveling to the planner
class.
 2016-09-18 13:50:38 -05:00
Scott Lahteine 9429c7db89 Use ABC indices in delta[] 2016-09-18 13:50:38 -05:00
Scott Lahteine 5f2f991192 Use 'logical' rather than 'target' or 'cartesian' 2016-09-18 13:50:38 -05:00
Scott Lahteine 40d3e854f6 Remove redundant extern delta[] 2016-09-18 13:39:47 -05:00
Scott Lahteine 2ebfbc4c8d Merge pull request #4836 from thinkyhead/rc_some_comments 
Some comments, const args, debug output tweaks
 2016-09-18 13:38:07 -05:00
Scott Lahteine e5505e3b33 Allow non-square leveling grid 2016-09-18 13:11:20 -05:00
Scott Lahteine 2fc9ad6657 Use const ref args in probe_pt 2016-09-18 12:58:43 -05:00
Scott Lahteine 2c2688d7ad Adjust comments, spacing 2016-09-18 12:58:42 -05:00
Scott Lahteine b9d19b0008 Tweak extrapolate_one_point 2016-09-18 12:58:42 -05:00
Scott Lahteine 3c0b591935 Fix nozzle position description 2016-09-18 12:58:42 -05:00
Scott Lahteine 18d8dd4c0f set_current_from_steppers_for_axis const arg 2016-09-18 12:58:42 -05:00
Scott Lahteine edfaf1c582 Stepper::report_positions patch 2016-09-18 12:58:42 -05:00
Scott Lahteine d1f4c3d73b Patch sync_plan_position comment 2016-09-18 12:58:41 -05:00
Scott Lahteine 0c25af30d4 Document homeaxis 2016-09-18 12:58:41 -05:00
Scott Lahteine e7882e45e3 Document set_axis_is_at_home 2016-09-18 12:58:40 -05:00
Scott Lahteine fef959c31a Merge pull request #4834 from thinkyhead/rc_code_bool 
Standardize code_value_bool
 2016-09-18 12:44:20 -05:00
Scott Lahteine 07ac9a1152 Merge pull request #4822 from blubbfish/patch-3 
Tweak some german language strings
 2016-09-18 11:38:22 -05:00
Scott Lahteine 661fe09ce7 Standardize code_value_bool 2016-09-18 11:32:32 -05:00
Scott Lahteine 20e5140e75 Merge pull request #4833 from thinkyhead/rc_no_scara_axis_scaling 
Remove SCARA axis_scaling
 2016-09-18 11:31:50 -05:00
Scott Lahteine a501f430eb Enable M0/M1 with Emergency Parser 2016-09-18 11:14:10 -05:00
Philip Schell cd8b22b527 Tweak some german language strings 
Change some string to get a better wording in german
 2016-09-16 22:29:39 +02:00
Scott Lahteine 83a41c7ceb Remove SCARA axis_scaling 2016-09-16 15:21:18 -05:00
Scott Lahteine d41eeb62af Merge pull request #4781 from thinkyhead/rc_final_z_correction 
Use simplified Z correction in G29 when possible
 2016-09-16 15:14:19 -05:00
Scott Lahteine 502150046c Merge pull request #4805 from thinkyhead/rc_config_adjustment 
Additional documentation of Configuration.h
 2016-09-16 15:13:20 -05:00
Scott Lahteine a1812b55f6 Space out array values 2016-09-16 14:41:05 -05:00
Scott Lahteine d4599fd8ed Comment patches to Configuration.h 2016-09-16 14:41:05 -05:00
Scott Lahteine 723e983073 Default EXTRUDE_MAXLENGTH to 200mm 2016-09-16 14:41:04 -05:00
Scott Lahteine b08bd84f8e Merge pull request #4806 from blubbfish/patch-2 
Update language_de.h
 2016-09-16 14:39:20 -05:00
darrelhunt 7b8bfa4358 Update pins_TEENSYLU.h 2016-09-16 11:26:37 -07:00
darrelhunt 829c8592f2 Update pins_TEENSY2.h 2016-09-16 11:26:09 -07:00
darrelhunt e0aee20327 Update pins_SAV_MKI.h 2016-09-16 11:25:42 -07:00
darrelhunt 88d3fc0bcf Update pins_PRINTRBOARD.h 2016-09-16 11:25:14 -07:00
darrelhunt 4277221abb Update pins_BRAINWAVE_PRO.h 2016-09-16 11:24:32 -07:00
darrelhunt b8ecbe9116 Update pins_BRAINWAVE.h 2016-09-16 11:23:52 -07:00
darrelhunt 60f757077e Update pins_5DPRINT.h 2016-09-16 11:22:52 -07:00
Silvio Didonna ff2b2d5939 Added missing translations 2016-09-16 01:17:58 +02:00
Philip Schell 2b11c3274c Update language_de.h 2016-09-15 15:16:11 +02:00
Philip Schell 54e6d12382 Update language_de.h 
@MarlinFirmware/language-team updated german languagefile to the latest english version
 2016-09-14 14:17:21 +02:00
Scott Lahteine 57564ae576 Use last probe point to correct Z when possible 2016-09-14 02:03:43 -05:00
Scott Lahteine e40646de42 Merge pull request #4803 from thinkyhead/rc_lcd_button_fix 
Clear LCD button state, apply timer to all
 2016-09-13 18:03:39 -05:00
Scott Lahteine 29f224594c Fix some regressive typos in G29 2016-09-13 17:31:02 -05:00
Scott Lahteine 5ecc7d9f25 Clear LCD button state, apply timer to all 
Addressing #3007
 2016-09-13 16:10:27 -05:00
Scott Lahteine 9b0931ef74 Apply fixed EXTRUDER_RUNOUT_PREVENT 2016-09-13 03:33:04 -05:00
Scott Lahteine b1a60e8954 Reformat, rearrange, tweak, and document 
- Add comments to several functions
- Add an option to use Fast SQRT for Delta IK
- Group related functions together
- Outdent some leveling-related functions
 2016-09-13 03:33:04 -05:00
Scott Lahteine 61284cbd8c Various code style adjustments 2016-09-13 03:33:04 -05:00
Scott Lahteine 788a16fc46 Clean up serial out code 2016-09-13 03:33:03 -05:00
Scott Lahteine 0e38bea79d Shrink 3-point leveling code 2016-09-13 03:33:03 -05:00
Scott Lahteine 4f75ce6957 Unify reset_bed_level for linear/non-linear 2016-09-13 03:33:03 -05:00
Scott Lahteine 41d8149bce Sanity check for more than 1 controller 2016-09-13 03:33:02 -05:00
Scott Lahteine 40785ce8ac Use count method for kinematic sanity check 2016-09-13 03:33:02 -05:00
Scott Lahteine 3236762e07 Clean up sanity check for LCD_PROGRESS_BAR 2016-09-13 03:33:02 -05:00
Scott Lahteine a9ed23225f bed_level => bed_level_grid 2016-09-13 03:33:02 -05:00
Scott Lahteine 82be65065c Fix up untilted_stepper_position and set_current_from_steppers_for_axis 2016-09-13 03:33:01 -05:00
Scott Lahteine d65f5d816f Patch to fix kinematics 2016-09-13 03:33:01 -05:00
Scott Lahteine e529c6407e Rename set_cartesian_from_steppers, cartesian_position 2016-09-13 03:33:01 -05:00
Scott Lahteine c109399bf6 Fix planner leveling and rename arguments 
Use lx, ly, lz for “logical” positions
 2016-09-13 03:33:01 -05:00
Scott Lahteine d4f21af6b3 sync_plan_position_delta => sync_plan_position_kinematic 2016-09-13 03:33:01 -05:00
Scott Lahteine acd1b6e9c0 Rename delta_grid spacing for general nonlinear 2016-09-13 03:33:00 -05:00
Scott Lahteine c5fa70809b Implement M0/M1 for EMERGENCY_PARSER 2016-09-13 03:33:00 -05:00
Scott Lahteine 786d1afb72 Add position_is_reachable, use in home_z_safely 2016-09-13 03:33:00 -05:00
Scott Lahteine b4034915f8 Move z safe homing to its own function 2016-09-13 03:33:00 -05:00
Scott Lahteine c84b14c77a Move delta homing to its own function 2016-09-13 03:32:59 -05:00
Scott Lahteine f9a192c7e3 Move setup() and loop() to the end 2016-09-13 03:32:59 -05:00
Scott Lahteine 8ff338c2b9 Patch stepper.h for SCARA 2016-09-13 03:32:59 -05:00
Scott Lahteine 74d7f5e57b Patch SCARA example config 2016-09-13 03:32:59 -05:00
Scott Lahteine 6ab54c60b1 Add conditionals for kinematics, leveling 2016-09-13 03:32:59 -05:00
Scott Lahteine 21514568fd Add enum for ALL_AXES 2016-09-13 03:32:58 -05:00
Scott Lahteine 413b61e64a Add HYPOT2 and float comparison macros 2016-09-13 03:32:58 -05:00
Scott Lahteine a6f6ed352b Fix comment on FILAMENT_RUNOUT_SENSOR 2016-09-13 02:14:34 -05:00
Scott Lahteine 48e14d049a Merge pull request #4710 from thinkyhead/rc_fix_leveling_maths 
Bed leveling that accounts for home XYZ
 2016-09-10 15:47:39 -05:00
Scott Lahteine 416821a71c Merge pull request #4765 from thinkyhead/rc_endstop_direction 
Sanitycheck endstop plugs based on homing direction
 2016-09-10 14:49:50 -05:00
Scott Lahteine 9248cfb0ad Bed leveling that accounts for home XYZ 2016-09-10 13:47:21 -05:00
Scott Lahteine 6ac9d895ca Tweak Filament Width variables 2016-09-10 13:29:25 -05:00
Scott Lahteine 68ba45572e Don't say "heating complete" unless done 2016-09-10 13:29:25 -05:00
Scott Lahteine 2bfc6fe1b0 Move XYZ constants closer to the top 2016-09-10 13:25:44 -05:00
Scott Lahteine 12b94e419f Sanitycheck endstop plugs based on homing direction 2016-09-08 13:56:32 -05:00
Scott Lahteine 29c4f67a29 Additional path - followup to #4743 2016-09-07 15:08:12 -05:00
Robert Bartl 494d5770b8 makefile fix for arduino 1.6.9 unzipped 2016-09-03 19:45:27 -05:00
Scott Lahteine 6f71bd7372 Merge pull request #4754 from thinkyhead/rc_mixing_regression 
Unify counter_m and counter_M
 2016-09-02 12:27:43 -05:00
Scott Lahteine 9bf78ef465 Fix capitalization of counter_m 2016-09-02 11:31:45 -05:00
Scott Lahteine 42b5616327 Try bool for direction instead of long 2016-09-02 11:28:48 -05:00
Scott Lahteine cbe9ab902c Merge pull request #4747 from thinkyhead/rc_sd_show_percent 
Option to show SD percent on Graphical LCD
 2016-09-02 07:44:42 -05:00
Scott Lahteine f20b2b21eb Optimize LCD string/char printing 2016-09-02 06:41:24 -05:00
Scott Lahteine 3b2f7ba225 Merge pull request #4748 from thinkyhead/rc_sd_print_timer 
Patch duration_t toDigital method
 2016-09-02 04:41:11 -05:00
Kai 445d8215e4 Option to show SD percent on Graphical LCD 2016-09-02 02:17:36 -05:00
Scott Lahteine d07a913f21 Tweak to stepper advance e_steps update 2016-09-02 02:06:17 -05:00
Scott Lahteine aaef7c6b89 Fix a misspelling of minimum 2016-09-02 01:42:38 -05:00
Scott Lahteine ad659b5f91 Merge pull request #4725 from thinkyhead/rc_log_machine_info 
Log machine info in G28 and G29
 2016-09-01 23:58:59 -05:00
Scott Lahteine c6859a1e54 Handle hours >= 100 2016-09-01 23:54:48 -05:00
Kai 9f706a9635 Patch duration_t toDigital method 2016-09-01 23:34:15 -05:00
Scott Lahteine c3caa42630 Merge pull request #4738 from thinkyhead/rc_ensure_floats 
Optimize stepper ISRs, plus cleanup, shorthand
 2016-09-01 14:36:22 -05:00
Scott Lahteine 426f662586 Apply MINIMUM_STEPPER_PULSE in stepper advance_isr 2016-08-30 14:31:48 -05:00
Scott Lahteine 8c7ee4599e Optimize stepper advance_isr 2016-08-30 14:31:48 -05:00
Scott Lahteine 9725bcd099 Minor "optimizations" in stepper ISR 2016-08-30 14:21:43 -05:00
Scott Lahteine 4ec3d1ea58 Add some commentary to stepper ISR 2016-08-30 14:21:15 -05:00
Scott Lahteine d9bcc7bb45 Set a bool when a stepper block is done 2016-08-30 14:20:48 -05:00
Scott Lahteine 08f717e5f7 Use bit-size typedefs for some stepper vars 2016-08-30 14:19:49 -05:00
Scott Lahteine d554c1dda8 Clean up planner kernel pass methods 2016-08-30 14:16:13 -05:00
Scott Lahteine b2e5ec85d7 Add [XYZ]_CENTER conditionals 2016-08-30 14:15:41 -05:00
Scott Lahteine 7e20448a2d Add HOMING_Z_WITH_PROBE conditional 2016-08-30 13:29:26 -05:00
Scott Lahteine 0e4107da34 Minor cleanup of homeaxis, etc. 2016-08-30 13:29:26 -05:00
Scott Lahteine f1201e11c7 Improve the Jerk description 2016-08-29 12:39:21 -05:00
Scott Lahteine 3f038bef00 Heading for movement settings 2016-08-29 02:01:34 -05:00
Scott Lahteine fd2269f489 Log machine info in G28 and G29 2016-08-28 20:48:28 -05:00
Scott Lahteine 6eaf4f4909 Fix spacing of debug output in homeaxis 2016-08-28 19:43:33 -05:00
Scott Lahteine 1e6d1c39ea Improve verbiage of dropsegments sanity error 2016-08-28 19:40:32 -05:00
Scott Lahteine 0729a8f08d Use the probe travel height for pre-probe move 
Instead of using the home_bump for Z to move close to the bed before doing a slow probe, use the probe travel height.
 2016-08-28 19:13:08 -05:00
Scott Lahteine dd94d0b9d5 Fix bed probing bug without PROBE_DOUBLE_TOUCH 
If `PROBE_DOUBLE_TOUCH` wasn't enabled, the probe move could be way too short! See #4701 for example.
 2016-08-28 19:00:25 -05:00
Scott Lahteine 35a0c46f16 Tweak debug output for probe in G29 2016-08-28 18:44:44 -05:00
Scott Lahteine a82a89bc58 Merge pull request #4722 from thinkyhead/rc_minimum_stepper_pulse 
MINIMUM_STEPPER_PULSE option
 2016-08-28 10:03:32 -05:00
Scott Lahteine a2572d2854 Fix Danish encoding and an error message 2016-08-28 09:51:06 -05:00
Scott Lahteine 759234af60 MINIMUM_STEPPER_PULSE option 2016-08-27 23:58:40 -05:00
Scott Lahteine 2cb63f0bf7 Merge pull request #4719 from thinkyhead/rc_delta_homing_patch 
Marlin patches for homing, esp. Delta
 2016-08-27 20:46:50 -05:00
Scott Lahteine 8241cf9901 Merge pull request #4720 from thinkyhead/rc_allow_stepper_omission 
Patch stepper.cpp to allow omitting steppers
 2016-08-27 20:36:22 -05:00
Scott Lahteine 7e893f4309 Merge pull request #4721 from thinkyhead/rc_temperature_isr_comments 
Rc temperature isr comments
 2016-08-27 20:36:03 -05:00
Scott Lahteine 73d86098b7 Marlin patches for homing, esp. Delta 2016-08-27 20:32:05 -05:00
Scott Lahteine 338bc768b1 Merge pull request #4717 from thinkyhead/rc_log_the_probe 
Debug logging of nozzle type and offsets
 2016-08-27 20:24:19 -05:00
Scott Lahteine fae92e3f3c Merge pull request #4718 from thinkyhead/rc_twibus_patch_20160827 
TWIBus patch for proper use of Wire.requestFrom
 2016-08-27 20:22:53 -05:00
Scott Lahteine a485a19052 Added optional planner logging 2016-08-27 20:12:22 -05:00
Scott Lahteine e9bfca5870 Additional comments for Temperature::isr 2016-08-27 20:12:22 -05:00
Scott Lahteine a255945f29 Add DEBUG_ALL enum 2016-08-27 20:12:22 -05:00
Scott Lahteine a28e15399f Patch stepper.cpp to allow omitting steppers 2016-08-27 20:11:17 -05:00
Scott Lahteine 2b226bc5c2 TWIBus patch for proper use of Wire.requestFrom 2016-08-27 20:09:28 -05:00
Scott Lahteine d641344d3a Remove redundant probe offset in homing 2016-08-27 19:58:56 -05:00
Scott Lahteine fb19a3cdec Merge pull request #4649 from thinkyhead/rc_boelle_danish_update 
Danish update (18 Aug 2016)
 2016-08-27 19:06:05 -05:00
Scott Lahteine 00638131e5 Debug logging of nozzle type and offsets 2016-08-27 15:21:01 -05:00
Scott Lahteine 8e9ac72191 Merge pull request #4709 from thinkyhead/rc_log_the_reason 
Log whether homing with probe or endstop
 2016-08-26 17:05:55 -05:00
Scott Lahteine 991a34aff2 Log whether homing with probe or endstop 2016-08-26 15:50:10 -05:00
Scott Lahteine 3b93b79f5c Merge pull request #4703 from bgort/RCBugFix 
Add note suggesting RAMBo users use the RAMBo board type or platformio environment
 2016-08-26 14:53:56 -05:00
Scott Lahteine 00cdb15cec Move invariant LCD strings to language.h 2016-08-26 02:48:57 -05:00
Bo Herrmannsen d2ae5b00d9 Danish up to date (18 Aug 2016) 2016-08-26 02:48:57 -05:00
Scott Lahteine e78274a7f4 Consistent order/formatting of pins files 2016-08-25 20:59:45 -05:00
Scott Lahteine 11e9530111 Properly handle probe pin for BQ printers 2016-08-25 20:59:44 -05:00
Scott Lahteine 1968983f35 Move PROBE_SELECTED to an earlier point 2016-08-25 20:59:44 -05:00
Brian 2fae32f35f Add note suggesting RAMBo users use the RAMBo board type or platformio environment; 
Add note that Viki 2.0 wiring diagram v1.2 has a mistake in it;
 2016-08-25 15:05:29 -04:00
esenapaj 1749a7fae3 Suppress warning 2016-08-24 00:18:06 +09:00
Scott Lahteine d07d85ac9f Ensure probe points at the delta edge are kept 2016-08-23 05:09:56 -05:00
AnHardt 7e36b76af2 Repair MarlinSerial with TX-buffer 
These '{' are important to avoid the redefinition of `unsigned char _sreg = SREG;`
at the same level.
Used in
```
#define CRITICAL_SECTION_START  unsigned char _sreg = SREG; cli();
```
 2016-08-22 23:40:09 +02:00
Gege2B 1e65f1a1d8 Update french language 2016-08-22 12:46:58 -05:00
Scott Lahteine ab59280075 MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT 
Follow-up to #4666
 2016-08-21 08:56:03 -05:00
Scott Lahteine 27b80b1dd1 Merge pull request #4667 from thinkyhead/rc_M211_sw_endstop_switch 
M211: Enable/Disable Software Endstops
 2016-08-21 06:44:00 -05:00
Scott Lahteine 14a03727e1 Tweak serialprintPGM 2016-08-21 00:10:09 -05:00
Scott Lahteine 2f223b8c79 Use ABC and XYZ for "3" 2016-08-21 00:10:08 -05:00
Scott Lahteine 4cd1ad8f28 Adjustments to M209, G28, M605 2016-08-21 00:10:08 -05:00
Scott Lahteine e354cf5884 Apply sw_endstops_enabled to manual move 2016-08-21 00:10:08 -05:00
Scott Lahteine 280534c06f Add M211: Enable/Disable Software Endstops 2016-08-21 00:10:08 -05:00
Scott Lahteine 01d4703429 PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION 
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
 2016-08-20 23:35:27 -05:00
Scott Lahteine a1f6cf1e5d Merge pull request #4665 from thinkyhead/rc_lcd_not_ultipanel 
Clean up ultralcd code, dependencies on ULTIPANEL
 2016-08-20 22:43:17 -05:00
Scott Lahteine 1a255afa36 Merge pull request #4666 from thinkyhead/rc_dropsegments_adj 
dropsegments => MIN_SEGMENTS_FOR_MOVE
 2016-08-20 22:42:16 -05:00
Scott Lahteine 374f8d2014 dropsegments => MIN_SEGMENTS_FOR_MOVE 2016-08-20 18:52:15 -05:00
Scott Lahteine 76c3f326ff Clean up DOGM code, comments 2016-08-20 18:33:12 -05:00
Scott Lahteine 71319adbb8 Wrap ULTIPANEL-dependent code 2016-08-20 18:33:11 -05:00
Scott Lahteine 305913545e Move number-to-string function to utility.* 2016-08-20 18:33:11 -05:00
Scott Lahteine 394c80c87b Merge pull request #4655 from thinkyhead/rc_serial_static 
Optimize, reduce size of MarlinSerial
 2016-08-20 15:51:57 -05:00
MagoKimbra 28d1e5a946 Fix_Zig_Zag 2016-08-20 11:28:08 +02:00
Scott Lahteine 14395a1a96 Optimize, reduce size of MarlinSerial 2016-08-19 16:53:20 -05:00
Scott Lahteine 4d4c00d69c Merge pull request #4651 from thinkyhead/rc_homing_vs_leveling_z 
Improvements to homing / leveling
 2016-08-19 15:45:49 -05:00
Brian Gortney 8fae3e1f9f Add Rambo support/env to platformio.ini; properly maps extended pins 2016-08-19 07:11:23 -04:00
Scott Lahteine 12d72363cb Do Delta radius check without sqrt 2016-08-19 05:05:48 -05:00
Scott Lahteine 044f800be9 Use SERIAL_PROTOCOLLNPGM in G28 2016-08-19 04:45:33 -05:00
Scott Lahteine d309a9647d Include probe offset for moving "close to the bed" 2016-08-19 04:45:33 -05:00
Scott Lahteine 35a08eeaeb Use Z_HOME_DIR over axis_home_dir where we can 2016-08-19 04:45:32 -05:00
Scott Lahteine 99b22d5785 Default AUTO_BED_LEVELING_GRID_POINTS to 3 2016-08-19 04:45:32 -05:00
Scott Lahteine 9b1f3f7d12 Sanity-check DELTA + AUTO_BED_LEVELING_GRID_POINTS 2016-08-19 04:45:32 -05:00
Scott Lahteine 733453569b Merge pull request #4650 from thinkyhead/rc_percent_is_percent 
extruder_multiplier => flow_percentage
 2016-08-19 04:38:18 -05:00
Scott Lahteine 55355a4fb8 Make probed points more symmetrical 2016-08-19 04:32:03 -05:00
Scott Lahteine 1f776f6034 Tweak some code comments 2016-08-19 04:32:02 -05:00
Scott Lahteine 748228cf40 Use named indices for delta_grid_spacing 2016-08-19 04:32:02 -05:00
Scott Lahteine ead333e7da line_to_axis_pos => do_homing_move 2016-08-19 04:32:02 -05:00
Scott Lahteine 7a4ccd7967 Add do_probe_move with Z fixes 2016-08-19 04:32:02 -05:00
Scott Lahteine a1bad589c9 Augment debug/homing logging 2016-08-19 04:32:02 -05:00
Scott Lahteine 41b5c48129 Update software endstops if EEPROM is loaded 2016-08-19 04:32:01 -05:00
Scott Lahteine 628dcbc764 extruder_multiplier => flow_percentage 2016-08-18 22:13:47 -05:00
Jason Westervelt d222ee4de2 Update language_ru.h 
Updated missing translations.  Caught up on change to MSG_HOME.
 2016-08-17 13:55:44 -07:00
Scott Lahteine d63b8e2b2b Additional details for I2C_SLAVE_ADDRESS 2016-08-15 19:27:53 -07:00
Scott Lahteine 7427290d3a Merge pull request #4634 from thinkyhead/rc_lang_disp_char 
Set language display charset in language.h
 2016-08-15 19:25:56 -07:00
Scott Lahteine aa30550b21 Keep SIMULATE_ROMFONT only language.h 2016-08-15 19:11:31 -07:00
Scott Lahteine cec61c350d Set language display charset in language.h 2016-08-15 19:01:12 -07:00
Scott Lahteine 165d7abb1b Merge pull request #4625 from thinkyhead/rc_i2c_request_capture_flush 
Add request, capture, flush to TWIBus
 2016-08-15 18:15:43 -07:00
RicardoGA 507784b846 Fix Messages length 2016-08-15 10:30:51 -05:00
Scott Lahteine bd928a69ec Add request, capture, flush to TWIBus 2016-08-15 00:04:20 -07:00
RicardoGA 7b7f319ed5 Update Spanish Lenguage 
Adds missing messages
 2016-08-14 23:30:43 -05:00
Scott Lahteine 132322e4d9 Fix #4614: currentScreen only defined with ULTIPANEL 2016-08-14 00:29:46 -07:00
Scott Lahteine dcd26b0403 Merge pull request #4621 from thinkyhead/rc_fan_set_output 
Init PWM-able AUTO_FAN pins with SET_OUTPUT
 2016-08-13 21:22:27 -07:00
Scott Lahteine 79ba983782 Allow reply() to use const string with no warning 2016-08-13 21:05:44 -07:00
Scott Lahteine 3a0a94b21a Always init configured fan pins 2016-08-13 20:38:40 -07:00
Scott Lahteine c63003ed3e Use matching auto-fan flags 2016-08-13 20:38:40 -07:00
Scott Lahteine 3475fd7b0f Init PWM-able auto fan pins with SET_OUTPUT 2016-08-13 20:38:40 -07:00
Scott Lahteine abf9696db1 Loop fan-pins based on array size 2016-08-13 20:05:32 -07:00
Scott Lahteine e88575c8ec Init next_auto_fan_check_ms to zero 2016-08-13 20:05:32 -07:00
Scott Lahteine 7272ec5608 Update HAS_FAN flags for 4 auto fans 2016-08-13 20:05:32 -07:00
Scott Lahteine 7b21811a9a Flags for matching auto-fans 2016-08-13 20:05:32 -07:00
Scott Lahteine 97e0aed304 Further refinements of TWIBus 2016-08-13 18:32:41 -07:00
Scott Lahteine 38fa1b1939 Merge pull request #4196 from cimbalo/Platformio_support 
Add working PlatformIO support
 2016-08-12 17:32:09 -07:00
Scott Lahteine d7edc039af Merge pull request #4605 from thinkyhead/rc_3drag_fan_is_8 
Fixup 3DRAG pins based on updated RAMPS pins
 2016-08-12 17:30:27 -07:00
Silvio 923388e0c7 Fix acceleration and feedrate following bq/Marlin 2016-08-12 15:42:20 +02:00
Scott Lahteine 405afec393 Include decimeters in filamentUsed display 2016-08-12 05:16:43 -07:00
Scott Lahteine fef0e8ba86 Merge pull request #4610 from thinkyhead/rc_sd_pause_and_stop 
Fix stopSDPrint so it works when paused
 2016-08-12 04:09:22 -07:00
Scott Lahteine 192ac2dfd7 Squish some CardReader code 2016-08-12 03:32:42 -07:00
Scott Lahteine 61932b859e Fix bug in CardReader::stopSDPrint 
If the SD print is paused, it cannot be stopped
 2016-08-12 03:21:10 -07:00
Scott Lahteine 9e5d5a3b7c Merge pull request #4597 from tnw513/italian_fix 
Added hyphenated strings for full graphic display
 2016-08-12 02:37:53 -07:00
Silvio Didonna f999292eea added hyphenated letters for full graphic display and fixed some strings 2016-08-12 08:57:22 +02:00
Scott Lahteine 67f119d18b Add an i2c request handler 2016-08-11 18:09:18 -07:00
Scott Lahteine 2d3db5b5bd Fixup pins_3DRAG based on updated RAMPS pins 2016-08-11 15:49:47 -07:00
Scott Lahteine d29a64d4b3 Merge pull request #4603 from thinkyhead/rc_less_MSG_MOVE 
Strip never-translated strings from language files
 2016-08-11 14:21:58 -07:00
Scott Lahteine d6a7ca6553 Merge pull request #4584 from thinkyhead/rc_delta_cal_more 
Use configured feedrates, center in DELTA_CALIBRATION_MENU
 2016-08-11 14:04:05 -07:00
Scott Lahteine d3b432adca Strip never-translated strings from language files 2016-08-11 13:41:07 -07:00
Scott Lahteine 1a558ef486 Tweak MarlinSerial precursor 2016-08-11 12:47:06 -07:00
Scott Lahteine 802818f7ab Cleanup SdFatUtil.h 2016-08-11 12:47:06 -07:00
Scott Lahteine 52560e257f Merge pull request #4595 from thinkyhead/rc_i2c_slave 
Add support for i2c slave address
 2016-08-11 12:39:26 -07:00
Scott Lahteine 432e9a1f50 Use configured feedrates, center for DELTA_CALIBRATION_MENU 2016-08-11 12:05:55 -07:00
Scott Lahteine cd496dd9bd do_blocking_move_to can't be 'inline', takes const ref args 2016-08-11 12:05:55 -07:00
Scott Lahteine dd75fca4d9 Make M155 / M156 a bit more flexible 2016-08-11 00:52:01 -07:00
Scott Lahteine a99ecf71d8 Add support for i2c slave address 2016-08-10 23:30:35 -07:00
Scott Lahteine b63d70b186 Fix serial output for MBL, M303 2016-08-10 18:49:52 -07:00
Scott Lahteine a36a168af2 Use the truly configured middle on Delta 2016-08-10 00:03:22 -07:00
Scott Lahteine 58c8e6cef2 Fixes #4576: Convert filamentUsed to long for display 2016-08-09 23:57:28 -07:00
Scott Lahteine 01f1f779a5 Followup to #4574, specify L for long 2016-08-09 23:43:37 -07:00
Kaibob2 1c7bd17e60 Update language_de.h with MSG_MOVE_E1 - E4 
MSG_MOVE_E1 was missing
MSG_MOVE_E2 was missing
MSG_MOVE_E3 was missing
MSG_MOVE_E4 was missing

I assigned "0" to "MSG_MOVE_E1", "1" to "MSG_MOVE_E2" and so on, as this is what i assume to be the standard naming for the first (E0) and second (E1) extruder. This would have to be changed inthe other languages too :(
 2016-08-09 20:49:26 +02:00
Scott Lahteine 880cdb553b Include days in Graphical LCD print timer 2016-08-08 23:21:36 -07:00
Scott Lahteine f4ac8c15e3 Merge pull request #4573 from thinkyhead/rc_mintemp_bed_later 
Throw MINTEMP BED error only if heating
 2016-08-08 23:02:42 -07:00
Scott Lahteine b7b5b50a84 Throw bed min temp error only if heating 2016-08-08 22:49:22 -07:00
Scott Lahteine d3ba878f70 Drop intermediate float in HEATER_0_USES_MAX6675 test 2016-08-08 22:49:22 -07:00
Scott Lahteine 3e8f9ecd1c Extend min/max_temp_error for the bed 2016-08-08 22:49:21 -07:00
Scott Lahteine 1f15f0df5f Merge pull request #4572 from thinkyhead/rc_digital_clock_100h 
Show up to 99:59 in digital time
 2016-08-08 22:28:29 -07:00
Scott Lahteine 8100a4dace Fix a compile error in EMERGENCY_PARSER sanity check 2016-08-08 21:49:57 -07:00
Scott Lahteine 45f67164b6 Simplify the delay in kill() 2016-08-08 21:49:34 -07:00
Scott Lahteine 30b1c731b5 Show up to 99:59 in digital time 2016-08-08 21:26:34 -07:00
Scott Lahteine 3be4511230 Patch command order in delta calibration menu 2016-08-08 21:15:25 -07:00
Scott Lahteine 9afa060ed6 Merge pull request #4570 from thinkyhead/rc_proper_delta_calibration 
Make DELTA_CALIBRATION_MENU more universal
 2016-08-08 21:11:40 -07:00
Scott Lahteine 46c8862635 Merge pull request #4564 from AnHardt/max-spi-setup 
MISO is an input
 2016-08-08 21:01:15 -07:00
Scott Lahteine 88540d8ecf Fix: LCD displays SD status at startup 2016-08-08 20:53:18 -07:00
Scott Lahteine b16ea09498 Make DELTA_CALIBRATION_MENU more universal 2016-08-08 20:42:58 -07:00
Scott Lahteine 3a56836ead Always disable SLOWDOWN for DELTA/SCARA 2016-08-08 18:06:46 -07:00
AnHardt aa9b52b2e7 MISO is an input 2016-08-08 20:09:57 +02:00
Scott Lahteine 67c4acf750 Merge pull request #4562 from thinkyhead/rc_fix_z_dual_endstops 
Fix Z_DUAL_ENDSTOPS with Z MIN Homing
 2016-08-07 19:23:09 -07:00
Scott Lahteine e113740fa3 Specify that Z_PROBE_*_HEIGHT is nozzle-relative 2016-08-07 17:54:17 -07:00
Scott Lahteine 462e189edd Move pullups after Z_DUAL_ENDSTOPS block 2016-08-07 17:43:02 -07:00
Scott Lahteine 367dad5902 Sanity check Z_DUAL_ENDSTOPS with DELTA 2016-08-07 17:08:41 -07:00
Scott Lahteine 5fca110e0d Fix Z_DUAL_ENDSTOPS with MIN homing 2016-08-07 17:08:41 -07:00
Scott Lahteine fc11f05c11 Merge pull request #4556 from thinkyhead/rc_all_feedrates_mm_s 
Within Marlin, maintain most feed rates in mm/s
 2016-08-07 16:14:16 -07:00
Scott Lahteine 7b2abe6fc8 Use steps_to_mm in extruder runout prevent 2016-08-07 00:28:52 -07:00
Scott Lahteine d320065320 Within Marlin, maintain most feed rates in mm/s 2016-08-07 00:28:52 -07:00
Scott Lahteine ed0b50ebee Merge pull request #4555 from thinkyhead/rc_mbl_index_rounding 
Remove premature int-cast from MBL cell index methods
 2016-08-06 23:34:01 -07:00
Scott Lahteine bad286d52f Save CPU by multiplying by pre-compiled values 2016-08-06 23:24:07 -07:00
Scott Lahteine dce6026e0e Remove premature cast to int 2016-08-06 23:01:29 -07:00
Scott Lahteine cffe77c537 Merge pull request #4553 from thinkyhead/rc_lcd_chars_save_ram 
Save bytes for custom chars (Hitachi LCD)
 2016-08-06 18:29:16 -07:00
Scott Lahteine 42927530fe Explicitly clear the screen in lcd_goto_screen 2016-08-06 18:10:39 -07:00
Scott Lahteine a6d2c2479f Minor cleanup of lcd_goto_screen calls 2016-08-06 18:10:39 -07:00
Scott Lahteine e47c8b9829 Save bytes for custom chars (Hitachi LCD) 2016-08-06 18:10:39 -07:00
Scott Lahteine 0ff5005c9b Allow connector flexibility for BQ ZUM Mega 2016-08-06 17:19:12 -07:00
Scott Lahteine 98437bd488 Allow override of CONTROLLERFAN_PIN with RAMPS EFF 2016-08-06 17:19:12 -07:00
Scott Lahteine 93eafa1785 Use DISABLED to check TEENSY pin option 2016-08-06 17:19:12 -07:00
AnHardt 98392abb78 Clean warnings for pins_BQ_ZUM_MEGA_3D.h 2016-08-06 17:19:12 -07:00
AnHardt 98e96feee9 Repair SPI-pins 
SCK_PIN can't be defined as DIO[number] they mus be defined as pure number.
So rebuilding the structure of fastio.h in pins.h.
 2016-08-06 17:19:11 -07:00
Scott Lahteine a00783c41f Format probe stowed test code 2016-08-06 14:31:07 -07:00
AnHardt f37e8a31d7 Make Allen Key Probe stow 
by switching off the tests for the probe before the stow move.
 2016-08-06 14:30:38 -07:00
Scott Lahteine 5347f39fce Merge pull request #4542 from AnHardt/rep-de 
Repair-language.de
 2016-08-05 23:50:35 -07:00
Scott Lahteine 5ef4a5577c Merge pull request #4537 from thinkyhead/rc_fix_some_flaws 
Patch up some flaws here and there
 2016-08-05 23:49:57 -07:00
AnHardt 0d3b67a580 Repair-language.de 2016-08-06 01:00:40 +02:00
Scott Lahteine 938e6d15c4 Patch up some flaws, here and there 2016-08-05 08:17:37 -07:00
Scott Lahteine 3a3984e67a Merge pull request #4535 from thinkyhead/rc_old_symbols_first 
Move tests for old symbols to the top of sanity check
 2016-08-04 21:24:02 -07:00
Scott Lahteine d7b882e430 Move tests for old symbols to the top of sanity check 2016-08-04 21:03:55 -07:00
Scott Lahteine 479107d04f Merge pull request #4530 from Kaibob2/patch-1 
Added / Update language_de.h
 2016-08-04 16:58:50 -07:00
Kaibob2 1abd7fa670 Update language_de.h 
Added german translation for MSG_INFO_PRINT_LONGEST and  MSG_INFO_PRINT_FILAMENT.
MSG_HEATING_COMPLETE changed from "Aufgeheizt" to "Extr. aufgeheizt"
MSG_HEATING changed from "Aufheizen" to "Extr. aufheizen"
 2016-08-04 09:40:38 +02:00
Scott Lahteine 7e2bd9a233 Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT 2016-08-03 21:18:38 -07:00
Scott Lahteine 445458c221 Don't include zprobe_zoffset in do_probe_raise 2016-08-03 21:12:02 -07:00
Rafa Couto 0114676953 Update of Galician language 2016-08-03 2016-08-03 15:00:18 +02:00
Scott Lahteine bd7a96ed42 Merge pull request #4517 from thinkyhead/rc_min_probe_pin 
Define Z_MIN_PROBE_PIN always, allowing override
 2016-08-02 21:35:59 -07:00
Scott Lahteine 704ae1b737 Merge pull request #4516 from thinkyhead/rc_short_prints_quiet 
Only report finished prints longer than 1 min
 2016-08-02 21:14:30 -07:00
Scott Lahteine 7ed70305df Merge pull request #4515 from thinkyhead/rc_fix_speaker_tone 
Prevent the 'tone(f,d)' function from being interrupted
 2016-08-02 21:13:47 -07:00
Scott Lahteine f1be87a85c Move probe pin sanity checks out of ABL block 2016-08-02 20:55:17 -07:00
Scott Lahteine 9cb596e88c Define Z_MIN_PROBE_PIN always, allowing override 2016-08-02 20:31:44 -07:00
Scott Lahteine 229f70f194 Only report finished prints longer than 1 min 2016-08-02 19:58:12 -07:00
Scott Lahteine e040e00ae9 Merge pull request #4514 from thinkyhead/rc_cleanup_circularqueue 
Patch up CircularQueue
 2016-08-02 19:42:38 -07:00
Scott Lahteine 6110d57c16 Prevent the 'tone(f,d)' function from being interrupted 2016-08-02 19:37:47 -07:00
Scott Lahteine b73203a0b7 Move some includes around to uncover missing deps 2016-08-02 19:37:46 -07:00
Scott Lahteine f26d5425bf Patch up CircularQueue 
- Use `size` and `count` instead of `length` and `size`
- Fix bug: `peek` should return the item
- Clean up comments, spacing, spelling
 2016-08-02 18:57:15 -07:00
Scott Lahteine c9123adc59 Improved SCREEN / MENU macros 2016-08-02 18:05:34 -07:00
Scott Lahteine cebeb48005 Merge pull request #4511 from thinkyhead/rc_encoder_flex 
Allow encoder pulse/step override for more LCDs
 2016-08-02 16:50:50 -07:00
Scott Lahteine 3cccaa9885 Allow encoder pulse/step override for more LCDs 2016-08-02 15:57:26 -07:00
Scott Lahteine 14c5a46ee9 Use multiplication for MMM_SCALED 2016-08-02 15:05:17 -07:00
Scott Lahteine d8945e8464 Fix Z_HEAD index for COREYZ 2016-08-02 15:05:17 -07:00
Scott Lahteine 0f030aface Merge pull request #4503 from AnHardt/fix-retract 
Correct typo in retract()
 2016-08-02 15:04:55 -07:00
Scott Lahteine fbd8f06951 Merge pull request #4506 from thinkyhead/rc_buzzer_needs_beeper 
Buzzer requires BEEPER_PIN
 2016-08-02 14:40:43 -07:00
Scott Lahteine 330f82971b Buzzer requires BEEPER_PIN 2016-08-02 14:05:37 -07:00
Scott Lahteine e0d7b8bf27 Fix Azteeg X3 servo pin / Viki i2c 2016-08-02 14:05:37 -07:00
Scott Lahteine 7cceb15925 Merge pull request #4505 from thinkyhead/rc_auto_select_dplugs 
Auto-select power plugs for RAMPS derivatives
 2016-08-02 12:56:52 -07:00
Scott Lahteine 593b37519a Boards with 4 power outputs are EFBF or EFBE 2016-08-02 12:34:28 -07:00
AnHardt 9ab94bd2c1 fix-babysrepping 2016-08-02 21:06:42 +02:00
AnHardt 39c4603598 Correct typo in retract. 2016-08-02 21:06:08 +02:00
Scott Lahteine cebd2bfff0 Auto-select power plugs for RAMPS derivatives 2016-08-02 11:59:25 -07:00
Scott Lahteine 34c60f1b55 Merge pull request #4491 from thinkyhead/rc_fix_lcd_move_e 
Use a default argument in _lcd_move_e
 2016-08-01 16:45:25 -07:00
Scott Lahteine 38af251b91 Use a default argument in _lcd_move_e 2016-08-01 16:09:26 -07:00
Scott Lahteine 374ae6c099 Fix pins for RAMBO plus VIKI 2016-08-01 16:09:26 -07:00
Scott Lahteine 7594138740 Merge pull request #4493 from jbrazio/buildroot-cleanup 
Move font folder
 2016-08-01 15:57:23 -07:00
Scott Lahteine 6eed37aafb Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off 
PID_EXTRUSION_SCALING, disabled by default
 2016-07-31 18:23:51 -07:00
Scott Lahteine 4bf3526d00 Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb 
Wrangle RAMPS variants and derivatives
 2016-07-31 18:22:49 -07:00
Scott Lahteine 1993c45759 Merge pull request #4487 from thinkyhead/rc_refresh_pos_fix 
Update refresh_positioning - no need for obj ref
 2016-07-31 18:22:38 -07:00
Scott Lahteine f83369b79c Update refresh_positioning - no need for obj ref 2016-07-31 18:01:13 -07:00
Scott Lahteine 63fd1f49a6 PID_EXTRUSION_SCALING, disabled by default 2016-07-31 17:49:34 -07:00
Scott Lahteine 49997e2e22 HI_VOLT_PIN => "RAMPS_Dn_PIN" 2016-07-31 15:42:52 -07:00
AnHardt 60ad365e21 repair-software-spi 2016-07-31 15:50:42 +02:00
Scott Lahteine f388beafa1 Merge pull request #4476 from otvald/RCBugFix 
FIX for endstop adjustemt on delta is offset
 2016-07-31 01:09:54 -07:00
Scott Lahteine 3633d4978b Merge pull request #4475 from esenapaj/Fix-for-PR-#4452 
Fix for PR #4452 (Additional heater-state output changes)
 2016-07-31 01:08:27 -07:00
Thomas Otvald Jensen fe059f1221 During homing, line_to_axis_pos will make a path which moves across the 
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!

Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
 2016-07-30 16:50:31 +02:00
esenapaj bd73e6d3c8 Fix for PR #4452 (Additional heater-state output changes) 
・Add missing ';'
 2016-07-30 22:49:30 +09:00
esenapaj cd5b03d88f Update distribution date and readme 2016-07-30 21:27:29 +09:00
Scott Lahteine f575e92f2e Merge pull request #4473 from esenapaj/Follow-up-the-PR-#4408-etc 
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
 2016-07-30 04:45:27 -07:00
esenapaj 657ef8aded Follow-up the PR #4408 (Add support for reprapworld LCD), etc 
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
 2016-07-30 20:32:57 +09:00
Scott Lahteine 83d341c394 Make Conditionals.h a catch-all for old configs 2016-07-30 04:25:30 -07:00
Scott Lahteine de951c64f1 Make pins for EFF a consistent order 2016-07-30 04:17:21 -07:00
Scott Lahteine 49f75b7891 pins_RAMPS_14.h => pins_RAMPS.h 2016-07-30 04:17:21 -07:00
Scott Lahteine d3b713cebc Set flags for RAMPS "type" in pins.h 2016-07-30 04:17:21 -07:00
Scott Lahteine 223b7e473f RAMPS assignment for derivatives 2016-07-30 04:17:21 -07:00
Scott Lahteine 3865843283 Consolidate setting of RAMPS High Voltage PWM outputs 2016-07-30 04:17:21 -07:00
Scott Lahteine bdac2eb13a Don't set non-existent SLED_PIN 2016-07-30 04:17:21 -07:00
Scott Lahteine bfbd01e29a Merge pull request #4470 from thinkyhead/rc_fix_manual_move 
Followup to #4468
 2016-07-30 04:17:05 -07:00
Scott Lahteine 802d873fc1 Merge pull request #4469 from esenapaj/Fix-for-PR-#4453 
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
 2016-07-30 04:08:54 -07:00
Scott Lahteine 8e2f095dde Merge pull request #4456 from jbrazio/speaker-type3 
Improvement to non-blocking speaker
 2016-07-30 04:07:08 -07:00
Scott Lahteine ad68b4cb8b Followup to #4468 2016-07-30 03:49:42 -07:00
esenapaj b8c112c490 Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS) 2016-07-30 19:37:43 +09:00
Scott Lahteine 2f76138645 Merge pull request #4468 from thinkyhead/rc_fix_manual_move 
Specify manual-movable E axes by extruder type
 2016-07-30 03:21:43 -07:00
Scott Lahteine 696b63e300 Specify manual-movable E axes by extruder type 2016-07-30 00:36:48 -07:00
Scott Lahteine 46c33f1cfa Merge pull request #4467 from jbrazio/safe_delay-millis_t 
Makes safe_delay() to be fully compatible with delay()
 2016-07-29 20:23:44 -07:00
Scott Lahteine 9e21b2e51d Merge pull request #4455 from AnHardt/double-bump-feature 
double bump probing as a feature
 2016-07-29 20:00:10 -07:00
Scott Lahteine db4d03bc81 Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2 
Additional heater-state output changes
 2016-07-29 19:58:00 -07:00
Scott Lahteine c68ca95345 Merge pull request #4464 from thinkyhead/rc_fix_steps_per_mm_handling 
Account for DELTA in Planner::refresh_positioning
 2016-07-29 19:34:59 -07:00
João Brázio 226e74a438 Fixes safe_delay() to be fully compatible with delay() 2016-07-30 02:56:26 +01:00
João Brázio 8e79e8cdb3 Adds types.h 2016-07-30 02:55:52 +01:00
Scott Lahteine 844a4e799e Account for DELTA in Planner::refresh_positioning 2016-07-29 18:41:11 -07:00
AnHardt 7188ce0ad6 double bump probing as a feature 
Why double touch probing is not a good thing.

It's widely believed we can get better __probing__ results when using a double touch when probing.

Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.

Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.

What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.

So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)

What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
 2016-07-30 03:00:49 +02:00
Scott Lahteine c31f56a38c Deprecate EXTRUDER_WATTS and BED_WATTS 2016-07-29 17:34:14 -07:00
Scott Lahteine e1970b4b28 Show power output in same order as temp output 2016-07-29 14:55:22 -07:00
Scott Lahteine 74df828acc Show ADC values inline rather than after 2016-07-29 14:55:18 -07:00
João Brázio 2b5faa61e2 Consolidates Buzzer and Speaker into a single object 2016-07-29 19:25:39 +01:00
João Brázio 8093c5f534 Non-blocking speaker now uses arduino's tone() 2016-07-29 18:45:50 +01:00
João Brázio 8896f08074 Fixes a compilation error introduced by #4448 2016-07-29 18:33:42 +01:00
Scott Lahteine ea5ac94804 Improved MANUAL_[XYZ]_HOME_POS 
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
 2016-07-28 19:51:48 -07:00
Scott Lahteine b40661cb18 Fix output of heater states 2016-07-28 17:40:01 -07:00
Scott Lahteine 9083e5420a Merge pull request #4419 from AnHardt/sd2pinmap 
Switch Sd2CardLib to fastio
 2016-07-28 17:38:46 -07:00
Scott Lahteine 6f59560526 Merge pull request #4448 from jbrazio/speaker-followup 
A little cleanup at speaker.h
 2016-07-28 17:37:36 -07:00
Scott Lahteine c94b6dd3e7 Revert to SanityCheck on every .cpp file 2016-07-28 17:17:50 -07:00
Scott Lahteine 256b03598d Merge pull request #4450 from thinkyhead/rc_fix_delta_optimization 
Fix DELTA speed calculation
 2016-07-28 16:50:04 -07:00
Scott Lahteine 753283e020 inverse_second => inverse_mm_s 2016-07-28 16:35:18 -07:00
Scott Lahteine 83e1d90ca3 Undo errant optimization of block->millimeters 2016-07-28 16:26:52 -07:00
João Brázio 909e98b1af A little cleanup at speaker.h 2016-07-29 00:03:25 +01:00
Scott Lahteine ae1c7bca1b Merge pull request #4445 from thinkyhead/rc_fix_rdfgsc_mega3 
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
 2016-07-28 15:55:30 -07:00
Scott Lahteine 03fdb26cd2 Wrangle encoder bits, LCD_CLICKED 2016-07-28 14:44:37 -07:00
Scott Lahteine 155def24c6 BLEN_A, B, C are defined in ultralcd headers 2016-07-28 14:38:50 -07:00
Scott Lahteine 42dcc3bf50 Remove "the click" comments 2016-07-28 14:38:50 -07:00
Scott Lahteine 0eba65f96b Fix for R.D.F.G.S.C. with MINITRONICS board 2016-07-28 14:38:50 -07:00
fabtopia 83d0d59303 Fix for R.D.F.G.S.C. with MEGATRONICS 3 board 
The support for reprapworld LCD boke the code for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER. See Full Grapics Display does not work any more after #4408  #4439
 2016-07-28 13:12:19 -07:00
João Brázio 4f191a384b
Moves the font folder into the buildroot 2016-07-28 19:56:41 +01:00
Scott Lahteine 5367d56f87 Merge pull request #4434 from thinkyhead/rc_delta_safe_homing 
DELTA should ignore Z_SAFE_HOMING
 2016-07-27 23:41:52 -07:00
Scott Lahteine 2525528fb2 DELTA should ignore Z_SAFE_HOMING 2016-07-27 23:25:56 -07:00
Scott Lahteine ab4b2a66ff Allow zero Z_RAISE_BETWEEN_PROBINGS 2016-07-27 05:00:58 -07:00
Scott Lahteine 8953e3e984 Allow Z_SAFE_HOMING without a probe 2016-07-27 04:33:56 -07:00
AnHardt e4942d2163 Switch SD2cadrLib to fastio 
Replace all fastDigitalRead/Write() with READ/WRITE()

Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.

Remove these conditional pin definitions from the pin-files. They are now always defined.

Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
 2016-07-27 12:40:44 +02:00
Scott Lahteine 21e744c454 Allow zero raise for deploy/stow 2016-07-26 17:19:25 -07:00
Scott Lahteine 54084612fd Merge pull request #4415 from petrzjunior/transl 
[LANGUAGE] Update Czech (Info screen strings)
 2016-07-26 13:20:20 -07:00
Scott Lahteine 5597400cda Merge pull request #4414 from thinkyhead/rc_split_conditionals 
Split up Conditionals.h into two files
 2016-07-26 13:16:52 -07:00
Scott Lahteine 4be635ec6e Remove MSG_PRINT_TIME from languages 2016-07-26 12:47:45 -07:00
Scott Lahteine 3be49881c0 Make SanityCheck.h a catch-all for obsolete configs 2016-07-26 12:41:40 -07:00
Scott Lahteine fa647cca23 Do the sanity check just once per build 2016-07-26 12:37:14 -07:00
Scott Lahteine 24a1a16e5d Move versioning to MarlinConfig.h 2016-07-26 12:37:14 -07:00
Scott Lahteine 7e70a0b05d Move pins / Arduino includes to MarlinConfig.h 2016-07-26 12:37:14 -07:00
Scott Lahteine d9f7ed9a3c Move some macros from Marlin.h to macros.h 2016-07-26 12:37:13 -07:00
Scott Lahteine 277899c175 Move include _Bootscreen.h where needed 2016-07-26 12:37:13 -07:00
Scott Lahteine 83c4653c71 Include boards and macros ahead of configs 2016-07-26 12:19:50 -07:00
Scott Lahteine 5f4702ecb2 Make Conditionals.h a catch-all for old configs 2016-07-26 12:19:50 -07:00
Scott Lahteine 8a44928df3 Make Conditionals.h a catch-all for old configs 2016-07-26 12:19:50 -07:00
Petr Zahradník junior 3d9b878cf0 Czech update 2016-07-26 13:48:27 +02:00
Scott Lahteine c6226bb0aa Unify config in a single include without nested includes 2016-07-25 23:04:19 -07:00
Scott Lahteine 2d378fac1b No need to include thermistortables.h in Configuration.h 2016-07-25 22:43:50 -07:00
Scott Lahteine df27d01cd9 Arrange needed includes in Marlin.h 2016-07-25 20:53:36 -07:00
Scott Lahteine 93ea281061 Split up Conditionals.h into two files 
Rather than include twice, which is tricky but may confuse
 2016-07-25 20:30:45 -07:00
Scott Lahteine 8684570f68 Merge pull request #4412 from thinkyhead/rc_followup_4402 
Followup #4402 fixing 3-point leveling
 2016-07-25 16:10:50 -07:00
Scott Lahteine c55b7d0750 Merge pull request #4405 from thinkyhead/rc_theres_always_something 
Move HAS_DIGIPOTSS to Conditionals.h
 2016-07-25 15:58:42 -07:00
Scott Lahteine 42eebcd518 Merge pull request #4409 from thinkyhead/rc_cleanup_comment 
Clean up Transfer Buffer Size comment
 2016-07-25 15:58:34 -07:00
Scott Lahteine 5272147f7c Followup #4402 fixing 3-point leveling 2016-07-25 15:56:34 -07:00
Scott Lahteine fcc39e2b5f Clean up Transfer Buffer Size comment 2016-07-25 12:54:55 -07:00
Scott Lahteine 0c0a63322b Patches to prepare REPRAPWORLD_GRAPHICAL_LCD 2016-07-25 12:10:25 -07:00
brupje a60a668f6b Support for REPRAPWORLD_GRAPHICAL_LCD 2016-07-25 12:10:25 -07:00
Scott Lahteine 4f2ff46ab9 Move HAS_DIGIPOTSS to conditionals 2016-07-25 00:10:46 -07:00
Scott Lahteine 54f4f80077 Merge pull request #4404 from thinkyhead/rc_better_stepper_indirection 
Arrange stepper_indirection by axis
 2016-07-24 19:26:39 -07:00
Scott Lahteine 169c21b477 Merge pull request #4402 from thinkyhead/rc_consistent_positioning 
Account for coordinate space offsets
 2016-07-24 19:23:20 -07:00
Scott Lahteine 750a1e5116 Arrange stepper_indirection by axis 2016-07-24 19:00:51 -07:00
Scott Lahteine 7c27f34996 Merge pull request #4397 from thinkyhead/rc_tweak_eeprom 
Neaten up EEPROM read/write functions
 2016-07-24 18:45:54 -07:00
Scott Lahteine 2595a40a61 Account for coordinate space more in G28 / G29 / M48 2016-07-24 18:34:05 -07:00
Scott Lahteine 060dc6d95a Neaten up EEPROM read/write functions 2016-07-24 18:19:39 -07:00
Scott Lahteine b7b7c90477 Merge pull request #4389 from thinkyhead/rc_optimize_planner 
Optimize planner with precalculation, etc.
 2016-07-24 17:48:23 -07:00
Scott Lahteine 6900bb2286 Merge pull request #4395 from tnw513/italian_fix 
Update Italian translations. Remove trailing spaces.
 2016-07-24 17:47:48 -07:00
Scott Lahteine e4816293a8 serial_echopair_P for uint16_t 2016-07-24 17:46:37 -07:00
Scott Lahteine d8e5af6834 Use RAW_POSITION for MBL in planner.set_position_mm 2016-07-24 17:20:36 -07:00
Scott Lahteine b183442c61 Fix inactive_extruder_x_pos for coordinate space 2016-07-24 17:20:36 -07:00
Scott Lahteine f75b0c2ee1 Make POSITION macros global 2016-07-24 17:20:36 -07:00
Scott Lahteine 101b60ef42 Tweak Dual X Carriage data spacing 2016-07-24 17:20:35 -07:00
Scott Lahteine 1fe60b723f Merge pull request #4400 from thinkyhead/rc_sanity_check_temp_sensor 
Sanity check for too many temp sensors
 2016-07-24 15:38:41 -07:00
Scott Lahteine bedda3be61 Patch generic delta error caught by sanity check 2016-07-24 15:24:40 -07:00
Scott Lahteine a5212bf277 Sanity check for too many temp sensors 2016-07-24 13:47:27 -07:00
Scott Lahteine d8f2876753 Replace some float division with multiplication 2016-07-24 13:27:50 -07:00
Scott Lahteine ddde785b37 Code formatting in planner.cpp 2016-07-24 13:27:50 -07:00
Scott Lahteine f8b5749235 Replace division in planner with multiplication 2016-07-24 13:27:49 -07:00
Scott Lahteine b921f6b69d Optimize calculation of block->millimeters for DELTA 2016-07-24 13:27:49 -07:00
Scott Lahteine db5df9500b Move sync_plan_position closer to the top 2016-07-24 13:27:49 -07:00
Scott Lahteine 2839c56f5a Merge pull request #4390 from jbrazio/duration_t 
Renamed timestamp_t to duration_t
 2016-07-24 13:24:05 -07:00
Scott Lahteine d6c50671d3 Sanitycheck: Z_SAFE_HOMING points are reachable 2016-07-24 10:54:47 -07:00
Scott Lahteine a6203366b6 Sanitycheck: Z_SAFE_HOMING requires a probe 2016-07-24 10:54:25 -07:00