zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
5609 commits 1 branch 0 tags 156 MiB
Commit graph

4557 commits

Author SHA1 Message Date
Scott Lahteine 3fa631130f Ensure a minimum height before XY move in probe_pt 2016-06-25 19:19:31 -07:00
Scott Lahteine a7684eef7a Squish code in ST7920 2016-06-25 18:35:15 -07:00
AnHardt b4076883cc Set testet delays for K8200, RAMBO, MINIRAMBO and ST7920 2016-06-25 18:35:15 -07:00
AnHardt 4454d80276 Decrease the needed nops to 1 
by shitfing the left shift into the high phase.

```
2	cbi 0x2,1 ;set CLK                      //
1	in r18,__SREG__                         //1
1-3	sbrc r24,7                              //2-4
2	rjmp .L19                               //4
1	cli                  .L19:              //5
2	lds r25,258          lds r25,258        //7
1	andi r25,lo8(-2)     ori r25,lo8(1)     //8
2	sts 258,r25          sts 258,r25        //10
1	out __SREG__,r18     out __SREG__,r18   //11
2	.L3:                 rjmp .L3           //13     //2
2	sbi 0x2,1 ;reset CLK //                 //13-15  //2-4
1	lsl r24	 ;  val      //1
1	nop                  //2
2	cbi 0x2,1 ;set CLK   //4
...
```
 2016-06-25 18:35:15 -07:00
AnHardt 56c42b572c 3 ms speedup for ST7920 and delay for BOARD_3DRAG 
and saving ~1k memory
by limiting the `#pragma GCC optimize (3)` optimisation to `ultralcd_st7920_u8glib_rrd.h`. These optimisation was and is not done for all the other displays, is the reason for the big additionally use of memory, because the complete 'ultralcd.cpp' and 'dogm_lcd_implementation.h' was optimised (sadly i did not observe a change in speed).

Unrolling the loop in `ST7920_SWSPI_SND_8BIT()`, what i expected the optimiser to do, by hand, saved some speed by eliminating the loop variable (i) compares and increases. Every CPU cycle in this loop costs at least 0.5ms per display update because it's executed more than 1k times/s.

The delays are now pre-filled with the calculated values for 4.5V driven ST7920.
A way to simply add __your__ timing into the configuration was made.

At 4.5V
1.) The CLK signal needs to be at least 200ns high and 200ns low.
2.) The DAT pin needs to be set at least 40ns before CLK goes high and must stay at this value until 40ns after CLK went high.

A nop takes one processor cycle.
For 16MHz one nop lasts 62.5ns.
For 20MHz one not lasts 50ns.

To fulfill condition 1.) we need 200/62.5 = 3.2 => 4 cycles (200/50 = 4 => 4). For the low phase, setting the pin takes much longer. For the high phase we (theoretically) have to throw in 2 nops, because changing the CLK takes only 2 cycles.

Condition 2.) is always fulfilled because the processor needs two cycles (100 - 125ns) for switching the CLK pin.


Needs tests and feedback.
Especially i cant test 20MHz, 3DRAG and displays supplied wit less than 5V.
Are the delays right? Please experiment with longer or shorter delays. And give feedback.

Already tested are 5 displays with 4.9V - 5.1V at 16MHz where no delays are needed.
 2016-06-25 18:35:15 -07:00
Scott Lahteine ca184d3d72 Merge pull request #4147 from thinkyhead/rc_fix_M48_raise 
Fix debug output in probe_pt
 2016-06-25 18:15:33 -07:00
Scott Lahteine b4161cbd98 Fix debug output in probe_pt 2016-06-25 17:59:03 -07:00
Edward Patel da88b00585 MBL: Add support for max z endstop 
See https://github.com/MarlinFirmware/Marlin/issues/4088
 2016-06-25 21:58:02 +02:00
Scott Lahteine 74878d1f16 Always do a brief delay in lcd_quick_feedback 2016-06-24 14:46:10 -07:00
Scott Lahteine 7de7552069 Merge pull request #4133 from MagoKimbra/Single_home_axis_delta 
Single home Axis Delta need simple sync_plan_position
 2016-06-23 21:14:22 -07:00
Scott Lahteine 15a6b49f37 Simplified probe_pt (in G30) 2016-06-23 20:25:46 -07:00
Scott Lahteine 6a7045b9bf Remove clean_up_after_endstop_move 2016-06-23 20:23:19 -07:00
Scott Lahteine 2a4f866561 Simplified probe_pt (in G29) 2016-06-23 20:22:28 -07:00
Scott Lahteine 89a2aa026b Simplified probe_pt (in M48) 2016-06-23 19:22:45 -07:00
Scott Lahteine f8530c5d1f Simplified probe_pt function (G28 grid) 2016-06-23 19:09:32 -07:00
Scott Lahteine c376c08042 Simplified probe_pt function (part 1) 2016-06-23 19:00:29 -07:00
Scott Lahteine 9a71b7f8ad Fix debug message for 3-point leveling 2016-06-23 18:17:31 -07:00
Scott Lahteine 550c03a5a9 Drop raise_z_after_probing function 2016-06-23 18:11:54 -07:00
Scott Lahteine bb38c816af Always raise in deploy_z_probe / stow_z_probe 2016-06-23 18:00:20 -07:00
Scott Lahteine 68f3350050 Cleanup M401 / M402 2016-06-23 17:04:41 -07:00
Scott Lahteine 3afda99adf Regular handlers for G31 / G32 2016-06-23 17:04:13 -07:00
Scott Lahteine 6803c8e37e Move Z up before, or down after XY, for "blocking move" 2016-06-23 15:50:13 -07:00
Scott Lahteine 03c70c1990 SERVO_DEACTIVATION_DELAY => SERVO_DELAY 2016-06-23 14:33:29 -07:00
MagoKimbra 570f3bbc07 Single home Axis Delta need simple sync_plan_position 2016-06-23 23:09:47 +02:00
Scott Lahteine 61f34eec03 Merge pull request #4125 from jbrazio/bugfix/planner-warning 
Fixes some compiler warnings
 2016-06-22 19:34:37 -07:00
Scott Lahteine bdcd628896 Merge pull request #4126 from thinkyhead/rc_lin_timing_patch 
Patch LIN_ADVANCE timing issue
 2016-06-22 19:24:44 -07:00
João Brázio 664232140d
Fixes somes compiler warnings 2016-06-23 03:12:55 +01:00
Sebastianv650 0c5192b288 Patch LIN_ADVANCE timing issue 
Also the extruder stepper ISR has to keep an eye on step_loops count.
 2016-06-22 19:05:14 -07:00
Scott Lahteine d4134e6901 Define Z_SAFE_HOMING point when Z_PROBE_SLED is activated alone 2016-06-22 17:51:32 -07:00
Scott Lahteine 7b2fadd598 Apply some fixes from Andreas 
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
 2016-06-22 17:35:59 -07:00
Scott Lahteine bd01592816 Goodbye MECHANICAL_PROBE 2016-06-22 17:13:33 -07:00
Scott Lahteine 2640d13a9f Simplify initial raise in M48 2016-06-22 16:53:04 -07:00
Scott Lahteine 3763d45656 Return Z position in run_z_probe 2016-06-22 16:52:32 -07:00
Scott Lahteine 1f48b5c30f Pass a raise to probe_pt, not a Z position 2016-06-22 16:40:21 -07:00
Scott Lahteine 6fdd5ba246 Save and restore feedrate in more places 2016-06-22 16:40:20 -07:00
Scott Lahteine fe173c2bc6 Generalized probe raise, use for after probing 2016-06-22 14:44:30 -07:00
Scott Lahteine 7da3080761 Simpler cleanup in G28 / G29 2016-06-22 14:44:30 -07:00
Scott Lahteine 15229d988b Fix compile error for bed matrix in M48 2016-06-22 14:04:46 -07:00
Scott Lahteine c01352cbd5 Add a dependency for z servo macros 2016-06-22 14:04:23 -07:00
Scott Lahteine c3794bd695 Add HAS_PROBING_PROCEDURE conditional 2016-06-22 14:03:22 -07:00
Scott Lahteine 42ce60c5cc Make sure NUM_SERVOS is set for Z servo endstop 2016-06-22 14:01:19 -07:00
Scott Lahteine b590a7dee0 Make Z_RAISE_BETWEEN_PROBINGS a more general option 2016-06-22 14:00:44 -07:00
Scott Lahteine bb9c67b4b5 Tweak some feedrate vars 2016-06-22 03:27:31 -07:00
Scott Lahteine 5158bd6e93 Screen out G29 E for sled and allen key, allow single probe 2016-06-22 03:20:33 -07:00
Scott Lahteine ccae92588d Cleanup debug in G28 and G29 2016-06-22 03:20:33 -07:00
Scott Lahteine b4a9d2366c Use a macro for kinematic sync_plan_position 2016-06-22 03:20:33 -07:00
Scott Lahteine bfccf26294 Use sync_plan_position_delta where needed 2016-06-22 03:20:33 -07:00
Scott Lahteine a6b8c67df4 Move probe deploy after setup call in G29 2016-06-22 03:20:33 -07:00
Scott Lahteine e69916d1bd Split up endstop_move functions 2016-06-22 03:20:33 -07:00
Scott Lahteine 0e18a4897b Simpler handling of sled/allen-key in probe_pt 2016-06-22 03:20:33 -07:00
Scott Lahteine 1a92e2ef18 Comment on run_z_probe 2016-06-22 03:20:33 -07:00
Scott Lahteine 68e0e5855e For all probes, at the end of G29 simply raise and stow 2016-06-22 03:20:33 -07:00
Scott Lahteine c3023f8cc5 Make M401/M402 available with HAS_BED_PROBE 2016-06-22 03:20:33 -07:00
Scott Lahteine 9f0c255c69 Show uncorrected position in set_bed_level_equation_3pts 2016-06-22 03:20:33 -07:00
Scott Lahteine 07298ac992 Initialize current_position to home_offset on boot 2016-06-22 03:20:33 -07:00
Scott Lahteine d50539583a Make XY_PROBE_SPEED a general probe option 2016-06-22 03:04:47 -07:00
Scott Lahteine 2798499b71 XY_TRAVEL_SPEED => XY_PROBE_SPEED 2016-06-22 02:45:25 -07:00
Scott Lahteine 88dc543584 Add a macro for XY_TRAVEL_FEEDRATE 2016-06-22 02:23:50 -07:00
Scott Lahteine 117db77c55 make motor_current_setting static and constexpr 2016-06-21 19:50:08 -07:00
João Brázio 19fb04d761 Update bq Hephestos 2 config 2016-06-21 18:15:51 -07:00
Scott Lahteine b0e47608e6 Merge pull request #4108 from esenapaj/Fix-for-PR-#4093 
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
 2016-06-21 18:12:08 -07:00
Scott Lahteine c84732e605 Merge pull request #4111 from esenapaj/Cosmetic-changes-and-small-fix-for-thermistortables.h 
Cosmetic changes and small fix for thermistortables.h
 2016-06-21 18:05:32 -07:00
Scott Lahteine cdc661ea5e Merge pull request #4110 from esenapaj/Small-cosmetic-changes-for-language-files 
Small cosmetic changes for language files
 2016-06-21 18:04:12 -07:00
Scott Lahteine c8186e9423 Merge pull request #4109 from esenapaj/Enclose-#error-string-by-double-quotes 
Enclose #error string by double-quotes
 2016-06-21 18:03:30 -07:00
Scott Lahteine 40cd20a236 Fix comments on EXPERIMENTAL_I2CBUS 2016-06-21 17:58:44 -07:00
esenapaj 385945ca31 Cosmetic changes and small fix for thermistortables.h 
・Adjust spacing
・Standardize comments position
・Remove ',' at the tail of array
 2016-06-21 21:19:47 +09:00
esenapaj fac58f0291 Cosmetic changes for language files 2016-06-21 21:13:25 +09:00
esenapaj 14b661b9e5 Enclose #error string by double-quotes 2016-06-21 21:06:14 +09:00
esenapaj d583ea852d Standardize format description of Panel 2016-06-21 20:51:27 +09:00
esenapaj aa6d35bd49 Move code block of probe to appropriate position 2016-06-21 20:36:46 +09:00
esenapaj 740fb2ce39 Adjust spacing 2016-06-21 19:37:45 +09:00
esenapaj f77f3ffa70 Remove duplicated Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX 2016-06-21 19:33:45 +09:00
Scott Lahteine 19fe93a5a9 Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST 2016-06-21 03:10:46 -07:00
Scott Lahteine 71a7408012 Merge pull request #4106 from thinkyhead/rc_temp_compile_err 
Fix compile error with watch_bed_next_ms
 2016-06-21 02:48:46 -07:00
Scott Lahteine dcb8ec32ee Fix compile error with watch_bed_next_ms 2016-06-21 02:13:41 -07:00
Scott Lahteine 3996242e9d Allow Z_MIN_PROBE_REPEATABILITY_TEST solo 2016-06-21 01:56:40 -07:00
Scott Lahteine 26a9cd0b08 Move run_z_probe to earlier block 2016-06-21 01:25:23 -07:00
Scott Lahteine 7f8a2025af Move raise_z_after_probing into earlier block 2016-06-21 01:03:40 -07:00
Scott Lahteine 2530371516 Always disable probe at the end of G29 2016-06-20 16:40:44 -07:00
Scott Lahteine 6aba98e470 Comment on setup_for_endstop_move 2016-06-20 16:40:44 -07:00
Scott Lahteine 04e88d008e Clear up ordering in G30 2016-06-20 16:40:44 -07:00
Scott Lahteine ed75b0ea11 Make clean_up function available for probes 2016-06-20 16:28:45 -07:00
Scott Lahteine 51d52cb52a Make run_z_probe available for any bed probe 2016-06-20 16:02:36 -07:00
Scott Lahteine f6b09cf465 Always use deploy/stow for dock_sled 2016-06-20 15:51:01 -07:00
Scott Lahteine 3b457c2dd3 Use deploy/stow with FIX_MOUNTED_PROBE too 2016-06-20 15:25:01 -07:00
Scott Lahteine 7e9d4a68d4 Always raise Z (if needed) for servo deploy/stow 2016-06-19 20:17:13 -07:00
Scott Lahteine 9beb3f2f5e Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup 
FIL_RUNOUT_INVERTING false by default
 2016-06-19 19:46:14 -07:00
Scott Lahteine f215b30932 Merge pull request #4093 from thinkyhead/rc_probe_without_abl 
Make Z Probe options independent of ABL
 2016-06-19 19:44:25 -07:00
Scott Lahteine 2fd2301928 FILRUNOUT => FIL_RUNOUT 2016-06-19 19:25:26 -07:00
Scott Lahteine dfbf8b3c2c FIL_RUNOUT_INVERTING false by default 2016-06-19 19:25:26 -07:00
Scott Lahteine 7b5cd314a5 Merge pull request #4095 from thinkyhead/rc_fil_runout_cleanup 
Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN
 2016-06-19 18:48:18 -07:00
Scott Lahteine de12228758 Make Z Probe options independent of ABL 2016-06-19 18:47:27 -07:00
Scott Lahteine add0032820 Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN 2016-06-19 18:13:33 -07:00
Scott Lahteine f8c278ce4d Cartesio UI display option in all configs 2016-06-19 17:39:46 -07:00
Scott Lahteine 400e13d136 Output a message for SD read errors 2016-06-19 17:14:56 -07:00
Roxy-3D 96b8bcca84 Merge pull request #4081 from thinkyhead/rc_tweaky_m48_tweaks 
Cleanup of M48
 2016-06-18 22:21:16 -05:00
Scott Lahteine b7e3c1bbc4 Tweak M48 output conditions 2016-06-18 16:17:53 -07:00
Scott Lahteine 1dad912b03 Adjust M48 raise / move handling 2016-06-18 15:38:24 -07:00
Scott Lahteine 46d3ef2223 Simplify sample_set probe_pt call in M48 2016-06-18 15:38:23 -07:00
Scott Lahteine a647b05f82 Shrink some debug code in G28 2016-06-18 15:38:23 -07:00
Scott Lahteine 4edf813bde Just-in-time declaration style in M48 2016-06-18 15:38:23 -07:00
Juan Ricardo Gomez Anaya c475291e19 Fix M851 
Minor change missing in the process of standardize the gcode M851
 2016-06-18 15:19:07 -07:00
Scott Lahteine e35583888c Merge pull request #4082 from esenapaj/Follow-up-the-PR-#4065 
Follow-up the PR #4065 (Remove support for XY servo endstops)
 2016-06-18 03:31:12 -07:00
Scott Lahteine 6dff52d920 Merge pull request #4078 from RicardoGA/Language_Spanish 
Update Spanish Language
 2016-06-18 03:28:46 -07:00
esenapaj d55b94d606 Follow-up the PR #4065 (Remove support for XY servo endstops) 
・Update a forgotten Configuration.h of Cartesio
 2016-06-18 18:01:58 +09:00
Scott Lahteine 4e860babbc Allow setting xy_travel_speed for delta leveling also 2016-06-18 01:40:49 -07:00
Scott Lahteine d36d4edd80 Tweak partial homing code 2016-06-18 01:16:50 -07:00
Scott Lahteine d3a05de96e Save and restore feedrate in probe functions 2016-06-18 01:16:26 -07:00
Juan Ricardo Gomez Anaya 5991eb428f Update Spanish Language 
Spanish language update and also add missing messages
 2016-06-18 00:27:04 -05:00
Scott Lahteine f33bd0bb10 Merge pull request #4077 from thinkyhead/rc_delete_old_macros 
Delete some obsolete Z servo macros
 2016-06-17 18:59:16 -07:00
Scott Lahteine defcacc1a9 Delete some obsolete Z servo macros 2016-06-17 18:49:17 -07:00
Scott Lahteine bbf5b486c3 Add an SD Card stop function, use in ultralcd 2016-06-17 18:27:14 -07:00
Scott Lahteine 3a150f07c2 Merge pull request #4073 from thinkyhead/rc_temp_mystery 
Minor tweaks to M109 / M190
 2016-06-17 17:49:50 -07:00
Scott Lahteine bd4ec727e7 Merge pull request #4066 from thinkyhead/rc_M851_with_probe 
Make M851 standard with a bed probe
 2016-06-17 17:32:55 -07:00
Scott Lahteine 692a6e7c91 Merge pull request #4065 from thinkyhead/rc_goodbye_xy_servos 
Remove support for XY servo endstops
 2016-06-17 17:32:08 -07:00
Scott Lahteine de177ba6c9 Minor tweaks to M109 / M190 2016-06-17 17:26:21 -07:00
Scott Lahteine eab44b30d4 Safety and serial sections 2016-06-17 15:19:43 -07:00
Scott Lahteine fc56a547d1 Rename movement section to motion 2016-06-17 15:19:43 -07:00
Scott Lahteine a8b8796cd7 Define probe offsets when a probe exists 2016-06-17 15:19:42 -07:00
Scott Lahteine 1000563d80 Make M851 standard with a bed probe 2016-06-17 15:19:42 -07:00
Scott Lahteine f66a194159 Merge pull request #4062 from jbrazio/bugfix/compiler-warnings 
Fixes misc gcc warnings
 2016-06-17 14:23:28 -07:00
Scott Lahteine 1bed392c68 HAS_Z_ENDSTOP_SERVO => HAS_Z_SERVO_ENDSTOP 2016-06-17 14:20:17 -07:00
Scott Lahteine 47ce810f52 Remove support for XY servo endstops 2016-06-17 14:19:17 -07:00
João Brázio d1e5dc6319
Fixes misc gcc warnings 2016-06-17 20:24:24 +01:00
esenapaj c5eecb11b2 Follow-up the PR #4055 (Croatian language support) 
・Update a forgotten Configuration.h of Cartesio
 2016-06-17 21:20:15 +09:00
Scott Lahteine d991a4c24a Merge pull request #4063 from thinkyhead/rc_remove_swp_files 
Delete mysterious .swp files from #3609
 2016-06-16 17:22:48 -07:00
Scott Lahteine 8d8cbef1de Merge pull request #4055 from thinkyhead/rc_croatian_language 
Croatian language support
 2016-06-16 17:22:25 -07:00
Scott Lahteine ebbed2975e Delete mysterious .swp files from #3609 2016-06-16 16:42:03 -07:00
Scott Lahteine 02e5dad29a Include Croatian in language listings 2016-06-16 16:18:26 -07:00
Scott Lahteine 2015aad867 Tweak Croatian language file heading 2016-06-16 16:09:57 -07:00
Robert Marko 884bc63fbe Add Croatian language 2016-06-16 16:09:57 -07:00
Scott Lahteine ef3bef6b9e Fix feedrate in gcode_T (max_feedrate is mm/s) 2016-06-16 16:03:14 -07:00
Scott Lahteine 4640974e1b Merge pull request #4060 from esenapaj/Follow-up-the-PR-#4053 
Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support)
 2016-06-16 15:44:00 -07:00
esenapaj 106227540e Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support) 
・Add implimantation of PR #3609 to configuration files of Cartesio
・Standardize macro names
 2016-06-16 19:22:31 +09:00
MagoKimbra 008d0637dd Fix gcode_T 2016-06-16 09:05:36 +02:00
edwilliams16 114d9db7d0 Show babysteps on the LCD in mm, not steps 2016-06-15 23:03:24 -07:00
Scott Lahteine b410bf933b Merge pull request #4053 from thinkyhead/rc_cartesio_redo 
CNControls Cartesio UI Support
 2016-06-15 22:33:45 -07:00
Scott Lahteine f639044c24 Merge pull request #3609 from jbrazio/feature/config-version 
Adds versioning for Configuration.h & Configuration_adv.h
 2016-06-15 22:09:47 -07:00
Scott Lahteine 4d2cb70152 Cartesio UI Support 2016-06-15 21:46:54 -07:00
Scott Lahteine da90bbe0eb Merge pull request #4010 from thinkyhead/rc_toolchange_adjust 
Fixup position adjustment on toolchange
 2016-06-15 21:10:33 -07:00
Scott Lahteine 948c467e16 Merge pull request #4043 from AnHardt/save_delay 
Introduce save_delay()
 2016-06-15 21:06:43 -07:00
Scott Lahteine 4b93989a77 MBL Z adjustment on toolchange 2016-06-15 20:49:36 -07:00
Scott Lahteine 9c800d1f8c Position adjustment for bed leveling 2016-06-15 20:49:36 -07:00
Scott Lahteine 8c7babb70f Merge pull request #4049 from esenapaj/Fix-for-the-PR-#4023 
Fix for the PR #4023(Add macros to move servos)
 2016-06-15 20:39:46 -07:00
AnHardt 1219310622 Introduce save_delay() 
Introduce save_delay() for long delays what otherwise would cause
watchdog resets

Explizit lcd_set_custom_characters(false) at the end of bootscreen().
Else the charset is not proper set in case of LCD_PROGRESS_BAR.
 2016-06-15 18:11:55 +02:00
esenapaj 44f091a413 Fix for the PR #4023(Add macros to move servos) 
・Add missing ')'
 2016-06-15 22:34:55 +09:00
Alexander Leisentritt c2b7ef1e7e "e" was renamed to "eindex" in a previous commit 2016-06-15 11:11:16 +02:00
Scott Lahteine 52ac2a62ee Merge pull request #4013 from thinkyhead/rc_toolchange_no_move 
Use "Tn S1" to change tools without moving
 2016-06-14 20:13:01 -07:00
Scott Lahteine d2a00b74e3 Merge pull request #4004 from thinkyhead/rc_feedrate_in_gcode_T 
Use linear feedrate in gcode_T, not volumetric
 2016-06-14 20:10:08 -07:00
Scott Lahteine 0ad26d0de8 Merge pull request #4034 from AnHardt/custom-splash-screen 
Custom Splash Screen
 2016-06-14 18:51:39 -07:00
esenapaj 741cda0e47 Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE) 
・Update forgotten example configurations
 2016-06-15 00:10:15 +09:00
AnHardt 02b3d6b8d3 Custom Splash Screen 
Custom Splash Screen for full graphic displays.

Too complicated for the hitachis without knowing what exactly to display.

On top of #4032
Realisation of an idea from #3996
 2016-06-14 09:39:28 +02:00
Scott Lahteine 78a48d7e3c Merge pull request #4038 from thinkyhead/rc_fix_heater_off 
Fix broken DISABLE_HEATER macro
 2016-06-13 20:58:34 -07:00
Scott Lahteine ee5be92206 Fix broken DISABLE_HEATER macro 2016-06-13 20:57:58 -07:00
Scott Lahteine 8d8180e028 Parse M905 args in Marlin_main.cpp 2016-06-13 19:25:28 -07:00
Scott Lahteine 2b340f5acb patch LIN_ADVANCE to use code_value_float 2016-06-13 18:54:25 -07:00
Scott Lahteine b708196770 Merge pull request #4032 from AnHardt/bootscreen-delay 
Show bootscreen later
 2016-06-13 18:27:05 -07:00
Scott Lahteine 587de1b6b6 Merge pull request #3676 from thinkyhead/rc_lin_advance_feature 
Advance extrusion algorithm – LIN_ADVANCE
 2016-06-13 18:04:58 -07:00
AnHardt b4fedec0d1 Show bootscreen later 
Init display and show bootscreen later, but init display in `kill()`
to init outputs before the bootscreen delays but being able to display
kill errors.
 2016-06-14 01:59:50 +02:00
Silvio Didonna 08e2c5a6ea Added and translated some strings from language_en 2016-06-13 13:04:09 +02:00
Scott Lahteine 4d2119f83a _lcd_move => _lcd_move_xyz 2016-06-12 17:14:19 -07:00
Scott Lahteine 811967923a Fix manual_move to move the correct E stepper 2016-06-12 17:14:19 -07:00
Scott Lahteine 0d0b751498 Merge pull request #4023 from thinkyhead/rc_servo_macros 
Add macros to move servos
 2016-06-12 15:45:39 -07:00
Scott Lahteine 4fbe818163 Add macros to move servos 2016-06-12 15:38:30 -07:00
Scott Lahteine b322ac4417 No need to check ULTIPANEL with DOGLCD 2016-06-11 16:50:06 -07:00
João Brázio 8ccd97e7cc
Updated all example configuration files 2016-06-12 00:36:15 +01:00
Scott Lahteine c7eeb09e8f Merge pull request #4012 from Blue-Marlin/watchdoghealing 
Heal the watchdog
 2016-06-11 16:18:22 -07:00
Scott Lahteine 7fb69e24fb Use "Tn S1" to change tools without moving 2016-06-11 15:58:45 -07:00
Scott Lahteine 2f1bf8373b Merge pull request #4005 from thinkyhead/rc_prepare_move_destination 
Clarify names of prepare_move functions
 2016-06-11 15:51:58 -07:00
João Brázio de8108648f
Added a versioning system to the config files 2016-06-11 23:48:10 +01:00
Blue-Marlin efe719f898 Heal the watchgog 2016-06-12 00:34:31 +02:00
Scott Lahteine b75e648f2c Clarify names of prepare_move functions 2016-06-11 15:32:49 -07:00
Scott Lahteine ae9b09fe94 menu => screen 2016-06-11 14:53:39 -07:00
Scott Lahteine 45ea8749d3 Wrap all items depending on ULTIPANEL 2016-06-11 14:27:34 -07:00
Scott Lahteine 0e2bfd0769 Use linear feedrate in gcode_T, not volumetric 2016-06-10 18:27:01 -07:00
Scott Lahteine bf8710d522 Merge pull request #4001 from Blue-Marlin/manage_manual_move-ULTIPANEL 
manage_manual_move(); -> ULTIPANEL
 2016-06-10 17:17:57 -07:00
João Brázio 2c34ec2bac
Closes #3999: Compilation error with BEEPER_PIN -1 2016-06-11 00:12:49 +01:00
Blue-Marlin 378ff92e98 manage_manual_move(); -> ULTIPANEL 
Makr the call of   `manage_manual_move() ` depandent of `ULTIPANEL`
 2016-06-10 23:36:57 +02:00
Scott Lahteine aad9c0ed8d Apply updated ISR timing code 2016-06-09 21:03:27 -07:00
Scott Lahteine 506d78b2f8 Run the advance_isr faster instead of doing multiple e-steps per interrupt 2016-06-09 21:03:27 -07:00
Scott Lahteine 6d62a4ffc8 Patch LIN_ADVANCE for style and forward-compatibility 2016-06-09 21:03:27 -07:00
Sebastianv650 fb8e880734 Add LIN_ADVANCE 2016-06-09 21:03:27 -07:00
Scott Lahteine e2d4919c01 Merge pull request #3991 from thinkyhead/rc_axis_units 
Rename some vars to clarify their relationship to acceleration
 2016-06-09 20:57:01 -07:00
Scott Lahteine 74060f17b7 Merge pull request #3995 from thinkyhead/rc_nonblocking_buzzer 
New feature: Non blocking tone queue
 2016-06-09 20:55:29 -07:00
Scott Lahteine a82c755a35 Fix BQ_LCD_SMART_CONTROLLER pin compiler warnings 2016-06-09 20:38:23 -07:00
João Brázio 5b5aa1572b Non-blocking buzzer 2016-06-09 20:20:05 -07:00
Scott Lahteine 72c6f2923f axis_steps_per_unit => axis_steps_per_mm 2016-06-09 17:04:51 -07:00
Scott Lahteine 446515ab79 Adjust spacing in block_t 2016-06-09 17:04:51 -07:00
Scott Lahteine 80ab749563 Rename acceleration locals for clarity 2016-06-09 17:04:51 -07:00
Scott Lahteine 3b08eb1eeb acceleration_st => acceleration_steps_per_s2 2016-06-09 17:04:51 -07:00
Scott Lahteine cb4704e07a Rename some planner acceleration vars 
- `per_sq_second` => `per_s2`
- `per_sqr_second` => `per_s2`
- `axis_steps_per_sqr_second` => `max_acceleration_steps_per_s2`
 2016-06-09 17:04:50 -07:00
Scott Lahteine 3c68be79dc Throw an error in PID_autotune for E < -1 2016-06-09 16:41:53 -07:00
Scott Lahteine 26f8f54c56 Merge pull request #3985 from thinkyhead/rc_inch_fahrenheit_kelvin 
Support inches, fahrenheit, and kelvin
 2016-06-08 20:10:33 -07:00
Scott Lahteine f0a5b7f0bc Merge pull request #3986 from thinkyhead/rc_mbl_forward_iteration 
Use memset in mbl.reset to save 58 bytes
 2016-06-08 17:33:41 -07:00
Scott Lahteine 0b3142b45b Remove redundant declarations from M100 code 2016-06-08 17:09:34 -07:00
Scott Lahteine 4980ecc1f7 Smaller binary using inline gcode argument getters 2016-06-08 17:03:28 -07:00
Reid Rankin 16212432c9 G20/21 and M149 support, and code_value() refactor 
This is an update of MarlinDev PR #196.

G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.

In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
 2016-06-08 16:51:10 -07:00
Scott Lahteine a569e89775 Merge pull request #3978 from thinkyhead/rc_planner_local_rename 
Rename some auto/locals to avoid name conflict
 2016-06-08 16:41:57 -07:00
Scott Lahteine 2d55862499 Use memset in mbl.reset to save 58 bytes 2016-06-08 16:05:18 -07:00
Scott Lahteine b23f710034 Cleanup and naming for num-to-string functions 2016-06-08 13:12:27 -07:00
Scott Lahteine 3d56b9d127 Merge pull request #3979 from thinkyhead/mbl_cell 
MBL: cel => cell
 2016-06-07 19:12:46 -07:00
Scott Lahteine cca047424d MBL: cel => cell 2016-06-07 19:10:39 -07:00
Scott Lahteine 49ecaf774d Rename some auto/locals to avoid name conflict 2016-06-07 15:38:45 -07:00
petrzjunior 9171a3d94f Update Czech language 2016/06/07 2016-06-07 19:25:15 +02:00
Scott Lahteine 5e6fdbb4cb Merge pull request #3963 from thinkyhead/rc_advance_steppers 
Use e_steps[EXTRUDERS] instead of e_steps[4]
 2016-06-05 02:46:06 -07:00
Scott Lahteine 47b5c55c29 Implement the delayed-move technique 2016-06-05 02:29:49 -07:00
Scott Lahteine a3e25a0fca Instead of trying to move now, set a flag to move asap 2016-06-05 02:29:48 -07:00
Scott Lahteine e2a8961635 Use e_steps[EXTRUDERS] instead of e_steps[4] 2016-06-05 01:44:53 -07:00
Scott Lahteine 43947072d5 Merge pull request #3895 from thinkyhead/rc_singlenozzle_part_2 
SINGLENOZZLE: EXTRUDERS versus HOTENDS
 2016-06-04 15:23:17 -07:00
Scott Lahteine d7e4e8e9be Fix a typo in #3955 2016-06-04 02:09:58 -07:00
Scott Lahteine c2362c1b3c Apply Marlin coding standards to MBL class 2016-06-03 21:43:32 -07:00
Edward Patel c06de0f097 MBL: Added keeping MBL active when homing single axises for #3750 2016-06-03 21:42:29 -07:00
Scott Lahteine f2fb66c00d With SINGLENOZZLE only set temperature for the active tool 2016-06-03 17:38:03 -07:00
Scott Lahteine cd441ce652 SINGLENOZZLE: EXTRUDERS versus HOTENDS 2016-06-03 17:38:03 -07:00
Scott Lahteine 32f8300cc6 Merge pull request #3944 from thinkyhead/rc_eboston_lcd_contrast 
Improved LCD contrast handling
 2016-06-03 17:08:41 -07:00
Scott Lahteine 9c87bf835c Merge pull request #3947 from thinkyhead/rc_statics_stepper 
Apply static to remaining Stepper methods
 2016-06-03 17:08:15 -07:00
Scott Lahteine 08871d4d6e Merge pull request #3950 from boelle/patch-3 
last of missing defines added
 2016-06-03 17:07:02 -07:00
Scott Lahteine 4e13cd3f35 Merge pull request #3955 from MagoKimbra/RCBugFix 
Fix M428 width DELTA & SCARA
 2016-06-03 15:50:37 -07:00
Scott Lahteine 2403a1cf9c Merge pull request #3952 from rafacouto/RCBugFix 
Galician language update.
 2016-06-03 15:46:03 -07:00
Scott Lahteine 8529122af1 Merge pull request #3946 from thinkyhead/rc_g28_servo_raise_before_stow 
Raise the servo probe before stow outside ABL context
 2016-06-03 15:45:36 -07:00
MagoKimbra f499be084a Fix M428 width DELTA & SCARA 2016-06-03 23:23:23 +02:00
Rafa Couto 5f8db3f574 Galician language update. 2016-06-03 18:24:53 +02:00
Bo Herrmannsen 8532bf4087 last of missing defines added 
need to check line 101-103
 2016-06-03 11:20:46 +02:00
Scott Lahteine 81384dfd36 Apply static to remaining stepper methods 2016-06-02 18:00:31 -07:00
Scott Lahteine 664b299a51 This fix is not DELTA compatible 2016-06-02 17:16:19 -07:00
Scott Lahteine 064efb20e0 Also call clear_command_queue for lcd_sdcard_stop 2016-06-02 17:16:19 -07:00
Scott Lahteine 6277395e1e set_current_position_from_planner() after stepper.quick_stop() 2016-06-02 17:16:19 -07:00
Scott Lahteine 381bc6f0b0 set_position => set_position_mm 2016-06-02 17:16:19 -07:00
Scott Lahteine 663d2463dc Merge pull request #3922 from thinkyhead/rc_statics_stepper 
Apply static to Stepper class
 2016-06-02 17:14:24 -07:00
Scott Lahteine 194185539d Merge pull request #3925 from thinkyhead/rc_statics_planner 
Apply static to Planner class
 2016-06-02 17:14:04 -07:00
Scott Lahteine 3fd9b331f0 Merge pull request #3924 from thinkyhead/rc_statics_temperature 
Apply static to Temperature class
 2016-06-02 17:13:17 -07:00
Scott Lahteine db0fd021d0 Z raise options independent of ABL so G28 can use them 2016-06-02 16:56:49 -07:00
Scott Lahteine 9eecb4404b Make raise_z_after_probing null sometimes 2016-06-02 16:56:49 -07:00
Scott Lahteine 28fb1f8994 Tweak #endif comment for ABL GRID 2016-06-02 16:56:49 -07:00
Scott Lahteine b3a37b493d Patch G28 servo stow to use Conditionals, raise_z_after_probing 2016-06-02 16:56:49 -07:00
Scott Lahteine 5390c846a5 Positive conditions for HAS_LCD_CONTRAST 2016-06-02 16:17:34 -07:00
Scott Lahteine efa7209acf Improved LCD contrast handling 
Based on MarlinFirmware/MarlinDev#200 from @eboston
 2016-06-02 16:17:34 -07:00
Scott Lahteine b703fa9538 Add sanity check for SAV_3DGLCD display types 2016-06-02 15:21:17 -07:00
lrpirlet 3aefa04386 Raise the servo probe before stow outside ABL context 2016-06-01 21:53:45 +02:00
Scott Lahteine 9729e9c450 Combine ST7565 / U8GLIB_NHD_C12864 items in dogm 2016-06-01 01:42:14 -07:00
Scott Lahteine f331763eca Merge pull request #3829 from thinkyhead/rc_fix_T_command 
Fix bad movement in gcode_T when switching extruders
 2016-05-31 19:36:18 -07:00
Scott Lahteine 67f816ff79 Merge pull request #3926 from thinkyhead/rc_statics_endstops 
Drop FORCE_INLINE from endstops.h
 2016-05-31 19:35:41 -07:00
Scott Lahteine 2bd4f33369 Merge pull request #3928 from thinkyhead/rc_allen_key_cleanup 
Remove excess allen key probe examples from configs
 2016-05-31 19:18:21 -07:00
Scott Lahteine d698c89971 Fix bad movement in gcode_T when switching 2016-05-31 19:14:33 -07:00
Scott Lahteine 1a01a44a94 Merge pull request #3936 from thinkyhead/rc_sav_mk1 
Support for SAV_3DGLCD OLED LCD controller
 2016-05-31 18:46:25 -07:00
Scott Lahteine 4770d7c346 Merge pull request #3933 from boelle/patch-2 
added defines present in en but not in da
 2016-05-31 18:42:38 -07:00
Scott Lahteine c6c01eaaac Merge pull request #3888 from thinkyhead/rc_slower_max31855 
Slower SPI speed for MAX31855
 2016-05-31 18:40:38 -07:00
Scott Lahteine a0b000d752 Support for SAV_3DGLCD OLED LCD controller 2016-05-31 14:41:16 -07:00
Scott Lahteine bd97bbc52a Make HAS_LCD_CONTRAST a boolean flag 2016-05-31 11:47:02 -07:00
Scott Lahteine bc77670673 Merge pull request #3929 from thinkyhead/rc_fix_printrboard_dac 
Need to call dac_init() in setup() for DAC_STEPPER_CURRENT
 2016-05-31 10:29:37 -07:00
Bo Herrmannsen a1a8240606 added defines present in en but not in da 2016-05-31 14:57:52 +02:00
Bo Herrmannsen 5eb7a79d93 initial changes to DA 2016-05-31 14:24:33 +02:00
Scott Lahteine 55ef04a566 Need to call dac_init() in setup() for DAC_STEPPER_CURRENT 
As reported by https://github.com/MarlinFirmware/Marlin/pull/3182#issuecomment-222595488
 2016-05-30 23:35:06 -07:00
Scott Lahteine 43a71ef226 Remove excess allen key probe examples from configs 2016-05-30 18:26:53 -07:00
Scott Lahteine 1582ed43bf Merge pull request #3918 from epatel/marlin/mbl_negative_xy_adv 
MBL: Move border macros to Configuration_adv.h
 2016-05-30 18:15:50 -07:00
Scott Lahteine ff53819856 Drop FORCE_INLINE in planner.h 
This change actually does increase the binary size by about 12 bytes,
but how does it affect performance?
 2016-05-30 17:18:28 -07:00
Scott Lahteine e60224a943 Drop FORCE_INLINE from endstops.h 
`FORCE_INLINE` seems to have no effect with standard optimization.
 2016-05-30 17:08:56 -07:00
Scott Lahteine 85512e9372 Drop FORCE_INLINE from temperature.h 
`FORCE_INLINE` seems to have no effect on code generation with standard
optimization.
 2016-05-30 17:06:50 -07:00
Scott Lahteine 78fb02a5ad Apply static to Temperature class 2016-05-30 16:50:51 -07:00
Scott Lahteine c3df293fc6 Merge pull request #3923 from thinkyhead/rc_statics_endstops 
Apply static to Endstops class
 2016-05-30 16:48:23 -07:00
Scott Lahteine 02735fd500 Merge pull request #3921 from thinkyhead/rc_calc_timer_tweak 
Tiny calc_timer speedup
 2016-05-30 16:47:03 -07:00
Scott Lahteine 668d50f68e Keep Stepper encapsulation, use static data and methods 2016-05-30 16:24:04 -07:00
Scott Lahteine 26f866b908 Apply static to Endstops class 2016-05-30 16:23:43 -07:00
Scott Lahteine 470d5ac09f Apply static to Planner class 2016-05-30 16:22:41 -07:00
Scott Lahteine ecfdcf7250 Tiny calc_timer speedup 2016-05-30 16:17:02 -07:00
Edward Patel 06593833ff MBL: Move border macros to Configuration_adv.h 2016-05-30 20:50:16 +02:00
Scott Lahteine ffe55c230d Merge pull request #3914 from thinkyhead/rc_fix_lcd_contrast 
Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL
 2016-05-30 11:20:14 -07:00
Scott Lahteine d3efc96289 Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL 
- `DEFAULT_LCD_CONTRAST` was incorrectly overriding all `DOGLCD`
- `MINIPANEL` conditionals are identical to `MAKRPANEL`
 2016-05-30 01:10:47 -07:00
Edward Patel 92a27c37b3 MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations 2016-05-30 09:50:11 +02:00
Scott Lahteine 3861f1e0da Merge pull request #3908 from jbrazio/bugfix/3826 
Closes #3826: SD printing will now pause and stop the print counter
 2016-05-30 00:08:57 -07:00
Scott Lahteine 8806c7bbcc Merge pull request #3903 from epatel/marlin/mbl_negative_xy 
MBL: Fix for negative x/y positions
 2016-05-29 22:07:35 -07:00
Scott Lahteine dc22097b3a Fix some of array initializations 
- In `stepper.h` init `count_direction` array
- In `ultralcd.cpp` init `autotune_temp` array
 2016-05-29 20:55:13 -07:00
João Brázio 40e64b36de
Closes #3826: SD printing will now pause and stop the print counter 
The LCD menu items for SD printing pause/stop have been updated to control
also the print job timer. This commit also fixes a small output bug with
M78, the failed print counter was displaying the wrong value.
 2016-05-30 00:56:39 +01:00
Edward Patel eb2746a34f MBL: Fix for negative x/y positions 2016-05-28 21:05:43 +02:00
Scott Lahteine fe3122774a Merge pull request #3806 from thinkyhead/rc_coreyz_support 
Support for COREYZ. Fixes for COREXY, COREXZ
 2016-05-26 18:50:43 -07:00
Scott Lahteine fad7680605 Slower SPI speed for MAX31855 2016-05-25 18:15:36 -07:00
Scott Lahteine 30f6b84561 Merge pull request #3812 from thinkyhead/rc_mbl_index_finders 
Two index finding functions for MBL
 2016-05-23 15:54:37 -07:00
Scott Lahteine 89e630b2fb Merge pull request #3808 from thinkyhead/rc_singlenozzle 
SINGLENOZZLE
 2016-05-23 15:52:19 -07:00
Scott Lahteine 827738a790 set_z parameters marked const 2016-05-23 14:25:43 -07:00
Scott Lahteine 9049f4084b EEPROM report uses G29 S3 2016-05-23 14:25:43 -07:00
Scott Lahteine 4955163959 Propose simpler probe index methods 2016-05-23 14:25:43 -07:00
Scott Lahteine a1a5cb5393 Propose simpler cel index methods 2016-05-23 14:25:42 -07:00
Scott Lahteine 360adc6a3b Small reduction in M421 code 2016-05-23 14:25:42 -07:00
Scott Lahteine a4ed988c60 Two index finding functions for MBL 2016-05-23 14:25:42 -07:00
Scott Lahteine 0e55c06f7d Rename CORE_AXIS_3 to NORMAL_AXIS 2016-05-23 13:58:40 -07:00
Scott Lahteine 5172d4ba40 COREYZ stepper, planner, endstop, babysteps 2016-05-23 13:58:40 -07:00
Scott Lahteine 6c7f4909b1 COREYZ Conditionals, SanityCheck for only a single kinematic 2016-05-23 13:58:40 -07:00
Scott Lahteine 95fee8ca81 Add option for CoreYZ kinematics 2016-05-23 13:58:40 -07:00
Scott Lahteine 678cbad76a Merge pull request #3819 from jbrazio/bugfix/followup-3813 
Followup for #3813
 2016-05-23 13:56:11 -07:00
AnHardt bb66ffb2ae Correct hardware endstops default 
All credits to RicardoGA
 2016-05-23 10:54:22 +02:00
João Brázio 75221fa673
Followup for #3813 2016-05-22 13:14:58 +01:00
Scott Lahteine f9b4b90058 Merge pull request #3813 from jbrazio/bugfix/3809 
Stopwatch and PrintCounter improvements
 2016-05-21 18:33:57 -07:00
João Brázio 8c0edb2de4
Fixes #3809 and adds several improvements to the Stopwatch and 
PrintCounter classes
 2016-05-22 01:59:59 +01:00
Scott Lahteine c5130fd23b Additional instructions for controller reverse options 2016-05-20 18:14:50 -07:00
Scott Lahteine cadf441059 Merge pull request #3798 from AnHardt/extend-M421 
Extend M421 with I and J parameters
 2016-05-20 16:17:23 -07:00
Scott Lahteine 0c7c45063b PID_ADD_EXTRUSION_RATE based on MarlinKimbra 2016-05-20 16:15:05 -07:00
Scott Lahteine 92ac133f2b Conditionals and Sanity Check for SINGLENOZZLE 2016-05-20 15:48:27 -07:00
Scott Lahteine 69abfef82e Add "SINGLENOZZLE" extruder option 2016-05-20 15:45:11 -07:00
AnHardt f5a036510f Extend M421 with I and J parameters 
Extend M421 with I and J parameters
 2016-05-21 00:18:09 +02:00
Scott Lahteine 2f6e7b7b9b Merge pull request #3805 from MatixYo/patch-7 
Update language_pl.h to the latest strings
 2016-05-20 14:50:49 -07:00
Scott Lahteine 1a6c72cb57 Apply to the rest of the configs 2016-05-20 11:52:27 -07:00
Scott Lahteine 37c6d0f4ed Reword MESH_G28_REST_ORIGIN comment 2016-05-20 11:52:27 -07:00
Edward Patel c7d90dc5ec Add option to configure G28 all axis resting position for MBL 2016-05-20 11:52:27 -07:00
Mateusz Juszczyk bbe4c20ef6 Update language_pl.h 2016-05-20 13:24:34 +02:00
Scott Lahteine 319d184999 Merge pull request #3803 from jbrazio/feature/buildroot-cleanup 
Buildroot cleanup
 2016-05-19 21:34:11 -07:00
Scott Lahteine a469341555 Merge pull request #3800 from jbrazio/feature/move-felix-cfg 
Moves Felix's dual configuration to a folder
 2016-05-19 18:53:39 -07:00
João Brázio 14652bb141
Moves shared helper scripts to the buildroot 2016-05-20 02:25:13 +01:00
João Brázio 80f05920c5
Moves Felix's dual configuration to a folder 2016-05-20 00:49:16 +01:00
Scott Lahteine 8218558953 Update comments, rename next_ping_ms, followup to #3797 2016-05-19 16:44:57 -07:00
Scott Lahteine 6d68b12e28 Merge pull request #3797 from AnHardt/fix-screen-updatedelay 
Rework intermediate idle() and manage_heater() calls in G2/G3 and G5
 2016-05-19 16:29:27 -07:00
AnHardt e761bdbb4b Remove SF_ARC_FIX from G5 (Cubic B-spline) 
Remove SF_ARC_FIX from G5 (Cubic B-spline).
SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc.
It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.
 2016-05-19 21:00:12 +02:00
AnHardt 2207001333 No compromises for the manage_heater() 
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
 2016-05-19 20:52:11 +02:00
AnHardt 0c4d885d5b Speedup sreen update delay 
Speedup sreen update delay
and correct a comment.

A module division by 10 is slooooow. (powers of 2 are fast - but then you can AND a bitmask with the same result)
 2016-05-19 15:41:09 +02:00
Rafa Couto 9d416289cc Update Galician language to 1.1.0-RCBugFix. 2016-05-19 19:33:40 +09:00
Scott Lahteine 07c9a11c3c Automatically set X2 stepper pins 2016-05-18 19:09:09 -07:00
Scott Lahteine 8aa591ca09 Merge pull request #3789 from jbrazio/feature/m999-s-arg 
Implements S1 argument in M999
 2016-05-18 16:58:09 -07:00
Scott Lahteine 138c5c8378 Merge pull request #3788 from thinkyhead/rc_dual_x_compile_fix 
DUAL_X_CARRIAGE fixes, improvements, Travis test
 2016-05-18 16:56:54 -07:00
João Brázio e6effb8f35
Implements S1 argument in M999 2016-05-19 00:13:33 +01:00
Scott Lahteine 2a7b1a85f7 Improve DUAL_X_CARRIAGE sanity check errors 2016-05-18 15:59:28 -07:00
Scott Lahteine 516e79bbda Declare extruder_duplication_enabled in Marlin.h 2016-05-18 15:51:44 -07:00
esenapaj 56d5ae596c Update Japanese trasration 
・Add new translation
・Change translation
 2016-05-18 20:42:50 +09:00
Scott Lahteine 4041508ffb Function decl. in headers don't need "extern" 2016-05-17 18:35:01 -07:00
Scott Lahteine 82c2d308dc Merge pull request #3783 from thinkyhead/rc_bezier_delta_fix 
Bezier style and DELTA patch
 2016-05-17 18:27:48 -07:00
Scott Lahteine ecec5c5e58 Bezier style and DELTA patch 2016-05-17 18:06:10 -07:00
Scott Lahteine d66e53c42b Merge pull request #3782 from thinkyhead/rc_home_z_before_g29 
Require homing of Z before G29
 2016-05-17 17:53:56 -07:00
Scott Lahteine 552516ddf5 Merge pull request #3781 from AnHardt/minor-delta-segmenting-speedup 
Minor DELTA segmentation speedup
 2016-05-17 17:17:38 -07:00
Scott Lahteine a28970784c XYZ unhomed 2016-05-17 17:02:53 -07:00
Scott Lahteine a9926b71a4 Require homing of Z before G29 2016-05-17 16:57:12 -07:00
AnHardt 41e9569dbc Minor DELTA segmentation speedup 
Minor DELTA segmentation speedup by pulling calculations out of the loop.
 2016-05-18 01:49:30 +02:00
Scott Lahteine 3016dfe484 Merge pull request #3744 from thinkyhead/rc_bezier_curves 
Add BEZIER_CURVE_SUPPORT — G5 command
 2016-05-17 13:57:38 -07:00
Scott Lahteine d0ac4541d3 Merge pull request #3775 from jbrazio/bugfix/followup-3770 
G29: Report final position back to host when using MBL
 2016-05-17 13:55:26 -07:00
João Brázio b6a3aef297
G29: Report final position back to host when using MBL 2016-05-17 01:27:59 +01:00
esenapaj 95f30529a6 Add stowing process for MECHANICAL_PROBE 2016-05-16 18:12:10 +09:00
esenapaj e2b87f6c85 Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE 2016-05-16 18:12:10 +09:00
Scott Lahteine 58339aea5f Merge pull request #3769 from jbrazio/bugfix/iteration-invokes-undef-behavior 
Bugfix: iteration invokes undefined behavior
 2016-05-15 20:36:25 -07:00
Scott Lahteine 26b4cb5b42 Merge pull request #3771 from thinkyhead/rc_auto_fans_again 
Fix checkExtruderAutoFans
 2016-05-15 20:32:31 -07:00
Scott Lahteine c9271e610b Merge pull request #3762 from jbrazio/bugfix/lcd-hide-bed-icon 
Remove the hotbed icon from the status screen
 2016-05-15 19:11:05 -07:00
Scott Lahteine 2f14934c65 Fix checkExtruderAutoFans 
Make sure to only set the fan state once when extruders share a fan
 2016-05-15 18:54:37 -07:00
João Brázio ecd490ed49
Bugfix: iteration invokes undefined behavior 2016-05-15 22:45:08 +01:00
Scott Lahteine abdfd914f8 Merge pull request #3763 from esenapaj/patch-4 
Follow-up for #3720 and #3759
 2016-05-15 12:37:51 -07:00
Scott Lahteine 754b0152f5 Fix MBL zigzag calls 2016-05-15 12:35:01 -07:00
esenapaj 6d722716f7 Follow-up the PR #3720 and #3759 
Update forgotten Configuration_DUAL.h
 2016-05-15 14:08:45 +09:00
João Brázio 451000387d
Remove the hotbed icon when HAS_TEMP_BED is false 2016-05-15 03:00:05 +01:00
Scott Lahteine a058226799 Prevent watchdog timeout in bezier moves 2016-05-14 17:41:16 -07:00
Scott Lahteine 13175ce7da Fix error checking in M421 2016-05-14 17:12:44 -07:00
Scott Lahteine bc5a547d55 More robust MBL index / point conversion 2016-05-14 16:45:56 -07:00
Scott Lahteine a3520b6f01 More precision in M503 output for MBL's M421 2016-05-14 16:19:37 -07:00
Scott Lahteine 1b90682617 Merge pull request #3702 from thinkyhead/rc_sensitive_fan_pins 
Remove need to define unused pins as -1 in pins files
 2016-05-14 15:49:22 -07:00
Scott Lahteine c8a40f06a6 Merge pull request #3759 from thinkyhead/rc_more_printcounter 
Printcounter bugfix and some new features
 2016-05-14 15:36:31 -07:00
Scott Lahteine 585c8a918f Merge pull request #3758 from thinkyhead/rc_verbiage 
Tweaks to some verbiage
 2016-05-14 15:27:11 -07:00