zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
12151 commits 1 branch 0 tags 156 MiB
Commit graph

3356 commits

Author SHA1 Message Date
revilor 6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
Scott Lahteine 996f7d1642 Fix I2C_POSITION_ENCODERS commentary 2019-01-30 22:17:17 -06:00
raTmole 988b5aa4e6 Update GT2560 V3 pins (#13036) 2019-01-30 21:10:56 -06:00
InsanityAutomation 7d927b6691 Move Z Probe Z Offset from Advanced to basic Configuration (#13056) 2019-01-30 21:08:36 -06:00
Giuliano Zaro 31e213e427 Always show Tune sub-menu (#13049) 2019-01-30 21:05:55 -06:00
teemuatlut f0503372d9 Revert E_AXIS_N cast (#13055) 2019-01-30 20:55:05 -06:00
InsanityAutomation a1d03fe7ba Fix single nozzle fan (#13038) 2019-01-30 20:54:04 -06:00
Scott Lahteine 159d7eefda New boards entry for the A20M 2019-01-28 21:08:20 -06:00
Scott Lahteine 97da6c1da5 Use MIN/MAX for min/max 2019-01-28 20:36:13 -06:00
Scott Lahteine 17a8c37148 Label menu edit items 2019-01-28 20:20:46 -06:00
raTmole ddeca7a358 Fix resume from power loss G-Code. (#13035) 2019-01-28 13:19:26 -06:00
Thomas Moore 02ab66fca3 Update Cohesion3D Pins Files (#13027) 2019-01-27 23:11:33 -06:00
Giuliano Zaro a79d80c78e Minor cleanup of pause code (#13030) 2019-01-27 23:10:25 -06:00
jeffstaley 0da636e1a3 Set correct stepper direction on reset (#13032) 
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
 2019-01-27 23:02:38 -06:00
Scott Lahteine 3845baf398 Followup to #12982 2019-01-27 22:53:46 -06:00
InsanityAutomation 48a3502656 Remote streamer improvements (#12982) 2019-01-27 22:43:13 -06:00
Scott Lahteine 621fbe99de Followup to #12817 2019-01-27 20:48:58 -06:00
Marcio Teixeira f214118e45 Action to notify host of filament runout. (#12817) 2019-01-27 20:18:05 -06:00
Scott Lahteine aad770bce8 Bring default configs in sync 2019-01-26 16:44:42 -06:00
jeffstaley 3f91233f6d
M29 logic was reversed 
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
 2019-01-25 07:36:52 -08:00
jeffstaley 0e0cc13650 Fix M29 for Pronterface SD card upload (#13010) 2019-01-24 21:10:59 -06:00
Jiri 24fffb8d93 Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS (#13006) 2019-01-24 16:34:40 -06:00
Scott Lahteine 8f9b246d0e Tweak some formatting, replace tabs 2019-01-24 13:18:56 -06:00
Bo Herrmannsen 808df82b36 Support for Anycubic I3 (#12972) 2019-01-24 12:40:49 -06:00
Scott Lahteine ae91914260 Prevent name conflicts with mixed stepper drivers 2019-01-24 01:25:28 -06:00
Scott Lahteine 0eca236dcd Fix L6470 config comments 2019-01-24 00:58:16 -06:00
InsanityAutomation f4d1f13358 Warn on cold extrusion, dont error 2019-01-24 00:16:14 -06:00
Scott Lahteine aa74a900f5 Bring Rostock 301 and ArmEd configs up to date 2019-01-23 23:37:37 -06:00
Scott Lahteine 0f07ba4f09 Tweak some comments 2019-01-23 20:18:13 -06:00
Scott Lahteine 00cdd41b5f Clean up for recent changes 2019-01-23 20:08:58 -06:00
Roman Moravčík 7d53b79596 Update Slovak translation (#12991) 2019-01-23 19:48:16 -06:00
Giuliano Zaro 18c32996c1 [2.0.x] Updated Italian language (#12997) 2019-01-23 19:35:42 -06:00
Bob Kuhn 7c1a5e3c47 Fix TEMP_TIMER in pins_STEVAL.h (#12994) 2019-01-23 19:34:39 -06:00
Scott Lahteine b4994ad12e Update language_it.h 2019-01-23 19:28:57 -06:00
Bob Kuhn 2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
Scott Lahteine 6453b82a5e Clean up trailing whitespace 2019-01-23 15:57:01 -06:00
Scott Lahteine 48a581ba2e Tweak some HAL Due code 2019-01-23 00:53:20 -06:00
Marcio Teixeira 54fdf57b8c ExtUI: Fix fan wrapping around from 0 to 100 (#12987) 2019-01-22 23:33:10 -06:00
InsanityAutomation dbe4126e07 Update language_en.h (#12988) 2019-01-22 23:32:01 -06:00
teemuatlut e5801b75f8 Fix TMC-related compile issues. (#12971) 
- `STEALTHOP_[XYZE]` configuration options now set the default state.
 2019-01-20 23:54:57 -06:00
Gert-Jan Rodenburg bb30927549 Fix pins for ZONESTAR_LCD with Zonestar ZRIB (#12956) 2019-01-20 23:52:51 -06:00
Ludy dc65d96aca Fix TMC compile error (#12965) 2019-01-20 23:47:28 -06:00
InsanityAutomation a1cf49935d Add laser control menu (#12883) 2019-01-20 23:41:47 -06:00
InsanityAutomation 75f2665f2e LCD SD Card items near top when not using wheel (#12926) 2019-01-20 23:24:53 -06:00
Scott Lahteine e1f951813a Remove old block end comment 2019-01-20 02:30:03 -06:00
Scott Lahteine 52108192d1 Prevent L6470 class name conflict with drivers.h define 
Fix #12824
 2019-01-20 00:32:56 -06:00
Scott Lahteine 0495fcd475 Minor spacing fix 2019-01-20 00:10:50 -06:00
lanserge c2cf8ffa82 Add support for Arduino DUE Shield Kit (#12950) 2019-01-19 23:43:32 -06:00
Scott Lahteine a5911765c3 Tweak some spacing 2019-01-19 20:27:57 -06:00
chrisly42 99e5e8362f Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848) 2019-01-19 20:19:14 -06:00
Scott Lahteine 6411680364 Update some pins spacing 2019-01-19 19:21:52 -06:00
teemuatlut 8a3f1d6932 Fix chopper timing struct and initialization (#12943) 2019-01-19 18:57:02 -06:00
Ludy c6991109b7 Update German language (#12953) 2019-01-19 18:50:24 -06:00
Giuliano Zaro ca9eb14f6a Update Italian language (#12951) 2019-01-19 18:48:13 -06:00
Ludy acf266fe78 Fix a compile warning, etc. (#12955) 2019-01-19 18:47:29 -06:00
Scott Lahteine 424aa05cc2 Fix some file endings 2019-01-19 18:19:12 -06:00
Scott Lahteine ce563d7c2e Various general cleanups 
Mostly from the L6470-oriented PR
 2019-01-19 16:56:12 -06:00
Scott Lahteine 02cc63d6d4 Update CreatorPro Configuration_adv.h 2019-01-19 16:37:50 -06:00
Marcio Teixeira f4c16e683b Follow up fixes to #12884 (#12940) 2019-01-17 18:48:29 -06:00
Scott Lahteine 712e23c383 Fix up some whitespace 2019-01-17 18:05:36 -06:00
Ziemowit 20c20dacb7 MKS SBASE needs DRV8825 (#12911) 2019-01-17 13:21:53 -06:00
Giuliano Zaro 7bb5d4bfe8 Small LED code reorganization (#12929) 2019-01-17 13:20:26 -06:00
teemuatlut e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
Bob Kuhn d08f27e27b Add support for STEVAL 3DP001V1 (#12894) 2019-01-15 18:59:36 -06:00
Alain Martel cdb562d558 Bring Migbot config up to date (#12916) 2019-01-15 18:53:07 -06:00
Giuliano Zaro 8f4c6e6d1a Fix case light on boot (#12919) 2019-01-15 18:50:56 -06:00
Marcio Teixeira f11c6d5d02 Fix M107 when dual-nozzles share fan (#12819) (#12909) 2019-01-15 18:45:18 -06:00
Karl Andersson 64a4649290 STM32 - Fix SD write (#12897) 2019-01-15 18:44:22 -06:00
Ludy 294521439e Clean up Configuration_adv.h (#12900) 2019-01-15 18:42:10 -06:00
InsanityAutomation 59b18aaeef Allow resume from pause with parking enabled (#12893) 
Currently, Pause of an SD-Memory card print does not work.    This has been verified to resolve the issue by multiple people.   

I understand more work needs to be done to resolve some of the concerns...
 2019-01-15 07:58:54 -07:00
Giuliano Zaro 85f149befe Save some progmem (#12913) 2019-01-14 20:56:30 -06:00
mikeshub 7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855) 
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
 2019-01-14 14:29:55 -06:00
Scott Lahteine 3644c940bf Tweak SD section of Main Menu 2019-01-13 18:00:07 -06:00
teemuatlut 1a79878dff Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN 2019-01-12 18:07:28 -06:00
Scott Lahteine 7cfce20cd3 Update comments on M125 2019-01-12 17:52:44 -06:00
Jason dc4786a504 Config files for PowerWASP Printer (#12889) 2019-01-12 16:57:45 -06:00
Scott Lahteine 3e867008f0 Fix some HAL_STM32F1 type declarations 2019-01-12 16:21:11 -06:00
Scott Lahteine eb78aed863
Rename LCD menus according to variable types (#12892) 2019-01-12 16:01:04 -06:00
InsanityAutomation ed3ab5e212 Fix M24 not starting new job (#12887) 2019-01-12 15:30:44 -06:00
Nils Hasenbanck f9299c4461 Make timer definition in pin files for STM32 possible (#12874) 
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.

Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.

Tested on an actual hardware to verify. (It wouldn't boot without it.)
 2019-01-12 14:40:49 -06:00
InsanityAutomation 082f6a27de ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) 2019-01-12 00:41:48 -06:00
Scott Lahteine 459f4fef60 Fix Temperature::init bug with HEATER_4_PIN 2019-01-11 22:54:26 -06:00
InsanityAutomation a403d9a50c Improve menu pause / resume (#12876) 2019-01-11 20:42:11 -06:00
Alain Martel 432c21456f Add 3DFabXYZ Migbot example config (#12775) 
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
 2019-01-11 20:41:20 -06:00
Scott Lahteine fb8111553e getStatus => report_status 2019-01-11 19:51:00 -06:00
Chris Pepper 2919f3045d [LPC176x] Update PIO extrascript (#12878) 2019-01-11 19:45:33 -06:00
Scott Lahteine 19fea772e5 Use E_AXIS_N where it makes sense 2019-01-11 19:42:34 -06:00
Scott Lahteine 0d30ccf767 Tweaks to TMC26XStepper 2019-01-11 19:42:34 -06:00
HackingGulliver 1fd8e2c649 Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879) 2019-01-11 19:25:48 -06:00
Scott Lahteine b402040059 Split bed size sanity check into two 2019-01-11 15:49:57 -06:00
Chris Barr 1d33784bf9 Add RUMBA32 Board (#12856) 2019-01-10 19:34:31 -06:00
Ondřej Nový a0ef6198ff Level bed corners Z-hop height option (#12858) 2019-01-10 19:15:17 -06:00
Karl Andersson 8ae6f1e556 Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869) 2019-01-10 19:01:31 -06:00
Scott Lahteine e6484d9dab Return to status when SD card is removed 2019-01-10 15:43:31 -06:00
Scott Lahteine 5f2d75f45b Move PINS_DEBUGGING to @section develop 2019-01-08 20:05:05 -06:00
Scott Lahteine da42f27c9e Use maths macros for ceil/floor 2019-01-05 21:21:02 -06:00
Ludy de4561c980 VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12822) 2019-01-05 14:12:05 -06:00
Giuliano Zaro 709a6356f7 Remove obsolete test conditions (#12829) 2019-01-05 14:02:45 -06:00
Luu Lac bcf347403b Fix M106 extruder & fan count (#12820) 2019-01-05 14:01:35 -06:00
Kaushik Vemparala ba7e35cbab Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774) 2019-01-04 19:30:08 -06:00
jmz52 d372e7e477 SDIO support for STM32F1 (#12782) 2019-01-04 13:38:07 -06:00
Marcio Teixeira 6a8fb0f25f Simplify backlash compensation code. (#12813) 
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
 2019-01-04 13:30:56 -06:00
luxflow 7f244f9b9c Update LPC SD pins for BIQU SKR (#12767) 
(Exactly matching the Azteeg X5 MINI Wifi)
 2019-01-03 10:44:00 -06:00
jmz52 813a4ea107 Add support for Mks Robin TFT display (#12706) 
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
 2019-01-03 10:38:39 -06:00
jmz52 c4237b529f Fix MKS Mini and SD card conflct over SPI mode (#12783) 2019-01-03 10:27:53 -06:00
Phr3d13 01f75591c6 Fix GTM32_PRO_VB Serial and HAL via watchdog (#12753) 
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
 2019-01-03 09:46:49 -06:00
Scott Lahteine 288340cb6c Followup to VORON 2019-01-03 09:14:14 -06:00
Scott Lahteine 2aaa681dea Remove unused Cheaptronic pins 2019-01-03 08:58:55 -06:00
Marcio Teixeira 81e753064a Fix ExtUI compile warnings and error (#12799) 2019-01-03 08:36:43 -06:00
Ludy 74c47803f7 Add VORON printer (#12705) 2019-01-03 06:27:03 -06:00
kAdonis 637fb20c75 Allow 4 fan animation frames (#12772) 2019-01-03 06:03:06 -06:00
petieken d9cf5e4883 Update pins_BIQU_SKR_V1.1.h (#12758) 2019-01-02 13:50:05 -06:00
TheLongAndOnly cb643d87df Adding missing code for triple Z-stepper auto-align (#12786) 2019-01-01 18:22:04 -06:00
Ludy 14a7faf087 Fix compile warning comparison uint and int (#12788) 2019-01-01 18:20:12 -06:00
Marcio Teixeira 60cb36bef3 Misc. improvements (#12747) 
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
 2019-01-01 15:17:48 -06:00
InsanityAutomation 4f2473053c Fix M106 with SINGLENOZZLE 2018-12-31 20:10:18 -06:00
Reece Kibble 7557f8d68c Rename all Stm32f1 to STM32F1 (#12639) 2018-12-31 16:36:49 -06:00
Scott Lahteine 371d9a1acf Fix line-endings, formatting, whitespace 
Followup to #12770
 2018-12-30 15:38:20 -06:00
Ludy 135c74017c Fix compile DEBUG_EEPROM_READWRITE error (#12746) 2018-12-30 11:37:20 -06:00
Giuliano Zaro 54ba44ee37 Fix bad sanitycheck (#12748) 2018-12-30 10:44:15 -06:00
swilkens b01a630bd0 [2.0.x] Correct Ender 3 bed size (#12769) 2018-12-30 10:42:47 -06:00
Alain Martel 44ed34475b Add MKS BASE 1.4 pins (#12770) 2018-12-30 10:40:22 -06:00
Roxy-3D 3a16cb6d7f
Slightly Slower Max X Axis speed 
On some T-Rex 2+ machines the previous max step rate could lose steps....
 2018-12-28 09:14:48 -06:00
Ludy 814d93c7cf Fix G33 sprintf output warning (#12738) 2018-12-27 18:05:42 -06:00
Ludy 3877bf9704 Fix compile error with delta and sensorless homing (#12740) 2018-12-27 17:51:22 -06:00
Ludy cfc5e96b4b Move JD to Config.h (and fix jerk->eeprom bug) (#12720) 2018-12-27 15:29:39 -06:00
Roman Moravčík 594898aea7 Limit hotend / bed temperature to maxtemp-15 (#12713) 2018-12-27 11:46:05 -06:00
InsanityAutomation 530ef5846f Make nomove=false for toolchange on filament swap (#12739) 2018-12-27 11:38:35 -06:00
InsanityAutomation 14ddda285c Confirmation on Abort SD print (#12717) 2018-12-27 11:36:39 -06:00
Msq001 f8c5d31864 Bugfix 2.0.x add motherboard pins define (#12689) 
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
 2018-12-27 10:52:35 -06:00
InsanityAutomation b7a8dcc35d Update Formbot T-Rex 3 pins (#12662) 2018-12-20 17:32:39 -06:00
Ludy f7127c44f8 Wanhao Duplicator i3 Plus pins create (#12701) 2018-12-20 17:30:36 -06:00
jmz52 33abb86b7e Add support for MKS Robin board (#12650) 
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
 2018-12-20 17:23:27 -06:00
InsanityAutomation 367a9f65aa Add Formbot 350c Thermistor (#12661) 2018-12-20 17:04:17 -06:00
Ludy 33f3c75213 GTM32 Pro VB FAN-PIN correction (#12666) 2018-12-20 16:42:15 -06:00
Scott Lahteine 9d59a9c840 Followup to #12691 (typo) 2018-12-20 16:38:32 -06:00
Ludy 3829d6ccf8 FYSETC F6 13 - E2_SERIAL_TX_PIN correction (#12667) 2018-12-20 16:11:33 -06:00
Kadah d35dcafa3d Added MKS MINI 12864 support to FYSETC F6 V1.3 (#12656) 2018-12-20 16:10:49 -06:00
Roman Moravčík 98cf546771 Limit set hotend temperature to maxtemp. (#12690) 2018-12-20 15:56:37 -06:00
Roman Moravčík 4dad489a50 [2.0.x] Limit PID autotune target to maxtemp-15 (#12691) 2018-12-20 15:55:30 -06:00
Marcio Teixeira 8dcc28c9ae Squelch warning mentioned in #11061 (#12676) 2018-12-20 15:34:24 -06:00
Ondřej Nový 4c8a6eee7b [2.0.x] Update Czech translation (#12683) 2018-12-20 15:28:46 -06:00
Ondřej Nový fcaed685b2 [2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config (#12664) 2018-12-18 13:35:59 -06:00
Ondřej Nový 0572be9439 [2.0.x] Enable PIDTEMPBED in Anet A8 example config (#12655) 2018-12-18 13:34:46 -06:00
Luc Van Daele c6e09c2689 [2.0.x] G33 clean up (#12648) 
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
 2018-12-18 12:43:38 -06:00
teemuatlut 7a5e637a37 Add spreadCycle parameter sets (#12645) 2018-12-18 12:42:14 -06:00
Marcio Teixeira 902d5b0f8b Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628) 2018-12-12 17:21:37 -06:00
Dave Johnson 9a4a463ec4 Sanity-check LIGHTWEIGHT_UI, move comment up (#12630) 2018-12-12 16:59:20 -06:00
teemuatlut 55144284c2 TMC connection test, spreadCycle parameters, improved debugging (#12616) 2018-12-09 20:54:48 -06:00
Ludy 97de9d54a5 Fix broken pins file include (#12617) 2018-12-09 19:06:03 -06:00
Ludy a7b3a61424 Improve some config comments readability (#12615) 2018-12-09 19:02:42 -06:00
Scott Lahteine daf07e4200 Align classic bed icon consistently 2018-12-09 12:00:10 -06:00
MasterPIC 3bb8b3529a Center ABL grid on bed with H parameter. (#12610) 2018-12-09 11:24:48 -06:00
Scott Lahteine 6cf8d40f41 Fix some serial echos of pin states 2018-12-09 02:38:32 -06:00
Scott Lahteine f6321f878a
Simpler AVR + Trinamic + Soft Serial sanity-check (#12606) 2018-12-08 23:34:26 -06:00
Scott Lahteine 7d15854514 Add Z_MIN_PROBE_PIN to MKS SBASE pins 2018-12-08 15:31:59 -06:00
Scott Lahteine e8bda62d2a Followup to servo angles patch 
Fix #12594
 2018-12-08 15:31:59 -06:00
Scott Lahteine 18fedafbc5 Refresh screen on SD Init 2018-12-08 15:31:59 -06:00
Marcio Teixeira b22716e938 M425 Backlash Correction (#11061) 2018-12-08 14:36:46 -06:00
Scott Lahteine fa47ce369a Sanity-check for negative steps, feedrate, accel 2018-12-07 19:38:15 -06:00
Scott Lahteine ef81b5f03e Link to font docs in ultralcd_DOGM.cpp 2018-12-07 19:10:55 -06:00
Scott Lahteine 4388015f1a Tweak config formatting 2018-12-07 16:57:14 -06:00
Scott Lahteine b7e38ea249 Signal an invalid mesh for M420 enable / load 2018-12-07 16:14:11 -06:00
teemuatlut 50b2fbd031 Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582) 2018-12-07 15:34:21 -06:00
Scott Lahteine 9fbd73d931 Fix up some delta settings 2018-12-05 18:57:47 -06:00
Dave Johnson 0947b92734 Build and CI fixes and optimizations (#12584) 
-Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix 7322df26ad). Results in identical binary output and cuts compile time in half
-Disable Cartesio config from CircleCI (compile failure)
-Disable Geetech I3 Pro X GT2560 from CircleCI (compile failure)
-Enable EEPROM on Micromake example config (fix compile failure)
-Move FolgerTech/i3-2020 to AVR platform in CircleCI (fix CirculeCI build failure)
-Disable various examples failing to build in CircleCI
-Enable various examples no longer failing to build in CircleCI
 2018-12-05 17:21:40 -06:00
mr-miky 11c7945365 Don't include STM32 Core code when compiling STM32 Generic (#12575) 2018-12-03 06:55:49 -06:00
Scott Lahteine 64389acdf1 Print a space after scrolling status 2018-12-03 06:17:09 -06:00
Scott Lahteine 7a361ad36a
Alternative fan image option (#12579) 
* Alternative fan bitmap
* Move bed over by 3px
 2018-12-03 05:55:33 -06:00
Scott Lahteine 261c6f4b96 Fix pause/resume SD print 
Followup to #12551, addressing #12566
 2018-11-30 19:23:08 -06:00
Scott Lahteine 2224a4d61a Remove AVR-only MARLIN_DEV_MODE code 2018-11-30 17:54:24 -06:00
Scott Lahteine e874f9664c Tweaks to endstops code 2018-11-30 14:25:55 -06:00
Scott Lahteine 3c58b16c9f
Move stepper enable/disable to stepper_indirection.h (#12562) 2018-11-30 12:48:46 -06:00
Scott Lahteine aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559) 2018-11-30 12:31:42 -06:00
Scott Lahteine c986239837
A single SERIAL_ECHO macro type (#12557) 2018-11-29 16:58:58 -06:00
Scott Lahteine 69d869c3d9 Tweak FR icon. Update font data. 2018-11-29 12:59:30 -06:00
Scott Lahteine 0c1cd9f590 Fix "No SD Card" indicator 2018-11-29 12:35:31 -06:00
Jacob Jordan 8be91677df Fix Skew factors (#12555) 
- Ensure Skew factors are calculated from test square measurements
 2018-11-29 11:39:31 -06:00
Scott Lahteine 03ef2d6c82
Fix "paused" message and M125 called by M25 (#12551) 2018-11-28 19:28:31 -06:00
Scott Lahteine 95d154a91f Fans loop macro 2018-11-28 16:45:08 -06:00
Scott Lahteine 61db0b65b6 Followup to heating progress 2018-11-28 14:47:43 -06:00
Scott Lahteine 4f9ec9ab45
Add heating progress bars (#12543) 2018-11-27 21:15:52 -06:00
Scott Lahteine 929a513a6b
Add poll_runout_states, which returns 1 for runouts (#12547) 2018-11-27 20:13:24 -06:00
Scott Lahteine 01b5c810d5 Space out multiple edit lines a bit 2018-11-27 18:10:19 -06:00
Scott Lahteine cd88ea2106 Fix runout debug output 
Followup to #12544
 2018-11-27 18:10:19 -06:00
Scott Lahteine cecc238f68 Save recovery info on SD pause 2018-11-27 14:42:19 -06:00
Marcio Teixeira 439a3e8463 Improve runout sensor, fix LIGHTWEIGHT_UI screen size (#12544) 2018-11-27 13:45:25 -06:00
Scott Lahteine 5b24ce9024 Hide M217 compile warning 2018-11-26 16:52:16 -06:00
David Bates d94b50a3d8 Add sample config for Delta with MKS SBASE (#10819) 2018-11-25 21:23:02 -06:00
InsanityAutomation dec721c52b Add Formbot Raptor2 and Raise3D pins (#12532) 
* Add Formbot Raptor2 board
* Add Raise3D Rumba board
 2018-11-25 19:56:06 -06:00
Scott Lahteine 6aae199572 Add missing boards to Makefile 2018-11-25 19:11:09 -06:00
Scott Lahteine 0a638cc022 Adjust Formbot Raptor pins 2018-11-25 18:35:45 -06:00
Ludy e5019a0481 Fix English special symbols (#12529) 2018-11-25 18:19:12 -06:00
Scott Lahteine 09d6db491a Fix wait_for_bed compile error 2018-11-25 18:05:41 -06:00
Roman Moravčík d545f984b0 Update Slovak translation (#12523) 2018-11-25 17:44:51 -06:00
Ludy 730f223100 Correct FANMUX2_PIN (#12538) 2018-11-25 17:27:41 -06:00
Yücel Temel d857cdfb27 Update Turkish language (#12524) 2018-11-25 17:26:26 -06:00
Scott Lahteine 4a7c6f7241 NUM_ARRAY => COUNT 2018-11-24 00:27:45 -06:00
Giuliano Zaro 31113c5adf Update Italian language (#12512) 2018-11-24 00:26:54 -06:00
Scott Lahteine b57343c255 Put status screen options in Configuration_adv.h 2018-11-23 23:15:07 -06:00
Scott Lahteine 1fcc13b011 Allow Serial Overrun Protection to be disabled 2018-11-23 21:07:38 -06:00
Scott Lahteine 29c53f2402 Hide some compile warnings 2018-11-23 21:07:38 -06:00
Scott Lahteine caca3c8503 Use wait_for_bed with WAIT_FOR_BED_HEATER 
Addressing #12517
 2018-11-23 20:39:23 -06:00
Scott Lahteine f1efcfed14 Fix backslash in language_test.h 2018-11-23 20:39:23 -06:00
Yücel Temel 3b186a55ac Don't show superscript ³ with NOT_EXTENDED_ISO10646_1_5X7 (#12513) 2018-11-23 20:16:51 -06:00
Scott Lahteine 82c96c971e Bring superscripts slightly lower in BDF fonts 2018-11-23 20:02:34 -06:00
Sinisa Culic 8a0992d921 Fast PWM for controller fan (#12485) 2018-11-23 16:03:39 -06:00
Ludy e98d195901 Remove extra declarations in cardreader.cpp (#12520) 2018-11-23 15:58:20 -06:00
Scott Lahteine fd2998efd5
Revert ADC_KEYPAD direction behavior (#12508) 2018-11-22 06:00:00 -06:00
Scott Lahteine d29cb09b3e Fix a minor compile warning 2018-11-22 05:35:38 -06:00
Yücel Temel 5b1d52671c Use superscript 3 in language_en.h (#12504) 2018-11-22 02:27:28 -06:00
Marcio Teixeira 7109dadd21 Additional pin definitions for Archim 2 (#12500) 
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
 2018-11-22 01:07:02 -06:00
Andy Shaw 4975b13b74 Fix problems with LPC1768 EEPROM flash emulation (#12503) 
* Remove duplicate calls to PrepareSector

Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required.

* Ensure correct alignment of RAM buffer

The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.
 2018-11-22 01:03:32 -06:00
Scott Lahteine b738972e69 General cleanup of Re-ARM pins 2018-11-21 19:00:49 -06:00
Scott Lahteine ee423dcdd0 Invert hotend bitmaps, by default 2018-11-21 01:02:06 -06:00
Scott Lahteine c5642a894f
Fix ADC_KEYPAD middle button (#12493) 2018-11-20 21:39:30 -06:00
Scott Lahteine 0946cbcdca Revert some const changes (for now) 2018-11-20 08:19:48 -06:00
Scott Lahteine 4def8b3b5e Expanded options for _Statusscreen.h (#12455) 
See the PR for full details. The updated system will be documented on the website in the near future.
 2018-11-20 07:50:37 -06:00
Scott Lahteine d51e5690f4 Don't show updir with no card present 2018-11-20 07:01:46 -06:00
Scott Lahteine ec9d21a234 Shift YZ on graphical display to fit Z+123.45 2018-11-20 06:58:18 -06:00
Scott Lahteine 817a37169a Apply/unapply const here and there 2018-11-20 06:44:21 -06:00
Scott Lahteine 643e0066a0 Followup to #12451 2018-11-20 06:27:19 -06:00
Marcio Teixeira 4bcb63b705 Fix for #12482 (#12483) 
Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)
 2018-11-20 00:04:11 -06:00
Marcio Teixeira 50ee747787 Fix compilation errors. Followup to #12439 (#12481) 2018-11-20 00:02:13 -06:00
Ludy 90a58488b5 Corrected unused var, default switch, Travis tests (#12477) 2018-11-19 23:59:48 -06:00
Scott Lahteine a4c15dc54f
Modify MBL to use IJ instead of XY (#12478) 2018-11-19 09:08:15 -06:00
Scott Lahteine fc3f1c4572 Get u8g reference for lcdprint 2018-11-19 06:23:15 -06:00
Scott Lahteine 88c57eaf55
Clean up some u8g code (#12476) 2018-11-19 01:33:59 -06:00
Ludy 1f93d2bcf7 Fix LCD compile error, etc. (#12472) 2018-11-18 20:39:49 -06:00
Scott Lahteine 826d570162
Combine Travis CI option-setting commands (#12474) 2018-11-18 19:58:02 -06:00
Scott Lahteine 9d13f07d09 GTM32 Pro VB changes from Markku Sinisalo 2018-11-18 19:56:38 -06:00
Roman Moravčík 5fbe5cabc8 Fixed displaying of kill MSG_OUTAGE_RECOVERY string. (#12470) 2018-11-18 18:05:29 -06:00
kAdonis 4ae9a06c60 Update M303.cpp (#12471) 2018-11-18 18:04:51 -06:00
Ludy c0b75f49b6 Fix "no effect" and "unused variable" compile warnings (#12473) 2018-11-18 17:54:00 -06:00
Nils Hasenbanck 5a4fd8e0a6 Fix access to the DWT peripheral for STM32 HAL (#12434) 
Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core.

This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.
 2018-11-18 01:30:46 -06:00
Scott Lahteine 7f225b9421 Fix MAX_MESSAGE_LENGTH 2018-11-18 01:11:26 -06:00
Scott Lahteine 06674a321a Remove extra include 2018-11-18 00:34:07 -06:00
Marcio Teixeira c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 2018-11-17 22:21:44 -06:00
Giuliano Zaro d3605cfc26 Don't start watching heaters when target is 0 (#12453) 2018-11-17 21:53:52 -06:00
Ludy 93e958f695 Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS (#12466) 2018-11-17 21:21:30 -06:00
Ludy 22d7fed60a Fix compile error with SD_FIRMWARE_UPDATE (#12462) 2018-11-17 21:13:36 -06:00
Nils Hasenbanck 779b2709ec Change temperature pin order for RemRam V1 (#12458) 
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
 2018-11-17 16:51:06 -06:00
Scott Lahteine 8ebb4dc294 Followup to static CardReader 2018-11-17 07:52:35 -06:00
Scott Lahteine 7ee5894360 Allow float XY probe offsets 
Responding to #12383

XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.
 2018-11-17 07:44:47 -06:00
Giuliano Zaro 43ecdb606f Fix a compile warning (#12452) 2018-11-17 07:08:25 -06:00
Ph0non 984c4ba8c7 Enable SD Card on RepRap Display and RADDS (#12446) 
* Enable SD Card on RepRap Display and RADDS

Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
 2018-11-17 06:59:40 -06:00
Ludy 56a94c2a26 Use 'target_extruder' in M104 as with M109 (#12448) 2018-11-17 06:55:25 -06:00
Scott Lahteine 66580f32c2
Make CardReader class static (#12451) 
* Make CardReader a static class
* Make CardReader flags into bitfields
 2018-11-16 22:39:16 -06:00
Scott Lahteine 3e9ffaddb6
Consolidate, optimize some LCD menu code (#12450) 2018-11-16 21:44:48 -06:00
Scott Lahteine d97e31db4c
Optimize Power-Loss Recovery (#12440) 2018-11-16 20:47:07 -06:00
Mateusz Krawczuk ca21ac6b9b Support two MAX6675 thermocouples (#8686) 2018-11-16 18:20:33 -06:00
Scott Lahteine 0e610815e4 No need for Cap:PAREN_COMMENTS 2018-11-16 04:28:40 -06:00
Scott Lahteine 7a075a5dc9 Tweak extruder errors 2018-11-16 01:32:21 -06:00
Scott Lahteine 2d92f333f5 Fix GcodeSuite::T active_extruder reference 2018-11-15 14:07:24 -06:00
Scott Lahteine d2bb53702a
Optimize target_extruder, ignore T with mixing (#12432) 
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
 2018-11-14 17:33:04 -06:00
Marcio Teixeira 5e586a6b39 Fix to runout sensor code. (#12431) 
- "old_state" is no longer a class static variable.
 2018-11-14 16:54:05 -06:00
Scott Lahteine d82c350de7
Miscellaneous LCD code renaming, reordering (#12430) 
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
 2018-11-14 13:13:51 -06:00
Scott Lahteine edfd106bc5
Rejigger Filament Runout class (#12428) 2018-11-14 11:45:57 -06:00
Scott Lahteine f4c128ecaa
Move RRW keypad code to a common method (#12429) 2018-11-14 06:00:21 -06:00
Scott Lahteine 54ec5528a0 hasstatus => has_status 2018-11-14 01:34:28 -06:00
Scott Lahteine ebf585b673 Fix an old sanity check 2018-11-14 01:15:35 -06:00
Ryan 052d102ded UltiMachine Archim 1 support (#12404) 2018-11-14 00:27:39 -06:00
Scott Lahteine 664e20754d Clean up pins files 2018-11-14 00:23:33 -06:00
Scott Lahteine 1eb5249598 Fix Formbot Trex-2+ configs 
Followup to #12422
 2018-11-13 21:53:54 -06:00
thiagodesacosta 075a22ed65 Update Portuguese-Brazilian translation (#12402) 2018-11-13 19:42:25 -06:00
Marcio Teixeira 3ceab8474c Add required "cardreader.h" include (#12419) 2018-11-13 17:12:44 -06:00
Giuliano Zaro 98c2fc4e42 Endstops fix followup (#12423) 
Followup to #12413
 2018-11-13 17:10:07 -06:00
Roxy-3D f19fd642ce
Updates to Formbot T-Rex 2+ configuration files (#12422) 
Updates to Formbot T-Rex 2+ configuration files
 2018-11-13 13:48:35 -06:00
Roxy-3D cda5ef08fa
Debug of G2-G3 for UBL (#12386) 
Changes only affect UBL.  Everything else is left alone.
 2018-11-13 11:20:21 -06:00
AnHardt 9ad3aed0ef Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools (#12417) 
Fix #12416

Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` -  to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.
 2018-11-13 04:56:10 -06:00
Giuliano Zaro d631267548 Refine endstops fixes (#12413) 
When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.
 2018-11-13 04:31:58 -06:00
Scott Lahteine 0ee1a92971
Group status methods, share reset_status with Extensible UI (#12414) 
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
 2018-11-13 01:47:45 -06:00
Scott Lahteine 690c4e8457 Clean TLM trailing whitespace 2018-11-13 00:03:34 -06:00
Scott Lahteine 143b2896e0
Add M412 to enable/disable filament runout detection (#12406) 2018-11-12 21:29:46 -06:00
Scott Lahteine a163c89c6a Followup to 50af1d1 2018-11-12 20:31:53 -06:00
AnHardt be6271767f Fix BABYSTEP_ZPROBE_OFFSET (#12408) 
Fix #12399

Did not compile without  `WATCH_HOTENDS || WATCH_THE_BED`.
Add condition to include "../../module/temperature.h".
 2018-11-12 17:44:21 -06:00
Scott Lahteine 50af1d1e08 Differentiate translated On/Off from Serial ON/OFF 2018-11-12 17:23:08 -06:00
Scott Lahteine df907a905f Update UBL comments for debug change 2018-11-12 03:46:48 -06:00
Scott Lahteine da17f8ad37 For now (!) don't synchronize in M204 and M205 
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
 2018-11-12 02:43:24 -06:00
Scott Lahteine a3923424c7 Clean up LCD width/height determination 2018-11-12 02:37:40 -06:00
Scott Lahteine a0c795b097
Encapsulate common display code in a singleton (#12395) 
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
 2018-11-11 12:16:24 -06:00
Scott Lahteine 9da6809ac3 Adjust some comment spacing 2018-11-11 11:28:50 -06:00
Scott Lahteine 471f403a67 Reduce code size with plain inlines 2018-11-11 08:36:10 -06:00
Scott Lahteine 30a49f5ee2 Apply extra condition to LCD_PROGRESS_BAR 2018-11-11 08:36:10 -06:00
Scott Lahteine 4e0c935959 Update HAL and libs formatting 2018-11-10 19:43:23 -06:00
Scott Lahteine 47483e8c17 Update Raptor config 2018-11-10 19:42:46 -06:00
Scott Lahteine 6093df11dc
Allow G26 to use the active extruder (#12387) 
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
 2018-11-10 18:07:38 -06:00
articide 4260282df7 Tevo Little Monster example configuration (#12370) 2018-11-10 03:36:01 -06:00
Scott Lahteine bed15fcd81 Tweak 'echo_not_entered' used by MBL's G29 2018-11-10 01:32:51 -06:00
Scott Lahteine c239131ff5 Use 'serial_spaces' in 'print_2d_array' 2018-11-10 01:32:51 -06:00
Scott Lahteine 56150ec030 Add reference comments to MeshLevelingState 2018-11-09 21:31:20 -06:00
Ludy 24c5e57bb6 Update German language (#12379) 2018-11-09 15:25:29 -06:00
Giuliano Zaro fd7fd55662 Solve endstops issues (#12382) 
- Partially reverts #11900 and tries to solve #12336
 2018-11-09 14:58:04 -06:00
Scott Lahteine 78ccedd6a8 Fix M91x sanity-check to permit TMC2660 
Fix #12362
 2018-11-09 05:48:15 -06:00
revilor b60abc7c37 [2.0.x] Macro G-codes (#9365) 2018-11-09 05:25:08 -06:00
Giuliano Zaro ccdbf20f60 Update Italian language (#12368) 2018-11-09 04:04:02 -06:00
Roman Moravčík d08847b1a6 Update Slovak translation (#12376) 2018-11-09 04:03:07 -06:00
InsanityAutomation 7665dff58b No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools (#12375) 2018-11-09 00:15:07 -06:00
Scott Lahteine 4ed6397e5d
More comprehensive NO_LCD_MENUS (#12367) 2018-11-09 00:07:16 -06:00
Scott Lahteine 9c8f083d6c Extend pins errors to include the processor 2018-11-08 22:25:59 -06:00
Scott Lahteine 525ea554a1 Remove obsolete comments 2018-11-08 10:55:18 -06:00
Scott Lahteine ef724edd80 Apply HAS_LCD_MENU in EEPROM code 2018-11-08 10:03:05 -06:00
Scott Lahteine b169320a03 Clean trailing whitespace 2018-11-07 02:40:18 -06:00
Scott Lahteine 81b1e9d272 Fix up xdiff, ydiff, zdiff in tool change 
Followup to #12137
 2018-11-06 22:56:33 -06:00
InsanityAutomation 6471a75a22 Combine more tool-change variables (#12137) 2018-11-06 22:22:20 -06:00
Scott Lahteine 147e270208 Restore GTM32_PRO_VB temp and heater pins 
Undo #12345
 2018-11-06 21:41:30 -06:00
Scott Lahteine 8def25e475 Set CUSTOM_MACHINE_NAME for some configs 2018-11-06 21:41:30 -06:00
Scott Lahteine 812f6a7dd7 Fix Resume from SD Pause 
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
 2018-11-06 21:09:37 -06:00
Scott Lahteine 4f72e041f2 Use card.stopSDPrint() for completeness 2018-11-06 20:55:17 -06:00
Scott Lahteine 488a17b3f5 Use IS_SD_PRINTING() more 2018-11-06 20:55:17 -06:00
Marcio Teixeira 4dbaa6369f Fix const pointer assignment compile error (#12350) 2018-11-06 19:49:39 -06:00
Giuliano Zaro 959ed32636 Update Italian language (#12352) 2018-11-06 19:30:24 -06:00
Roman Moravčík 812bfec65e Update Slovak translation (#12354) 2018-11-06 19:29:28 -06:00
Ludy 1624722566 Update German translation (#12355) 2018-11-06 19:28:40 -06:00
Scott Lahteine e574f01568
More advanced pause tweaks (#12356) 
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
 2018-11-06 19:25:57 -06:00
Scott Lahteine 5a470d4a49 Apply some tool-change cleanup 2018-11-06 18:20:01 -06:00
Roman Moravčík 34ea458667 Fixed advanced pause messages (#12353) 2018-11-06 15:27:19 -06:00
Scott Lahteine 4c5ca89d8c
Show the appropriate pause message (#12348) 2018-11-06 04:13:48 -06:00
Marcio Teixeira 8517d5f915 LCD menu code refactoring and cleanup (#12308) 2018-11-05 22:51:10 -06:00
Scott Lahteine b3b4e6dc45
Change Marlin debug flag names to fix conflicts (#12340) 
In reference to #11000
 2018-11-05 22:48:28 -06:00
Giuliano Zaro f7e682eeee Update Italian language (#12344) 2018-11-05 22:46:59 -06:00
Phr3d13 a813900fce Add Geeetech Rostock 301 config, update GTM32 Pro VB pins (#12345) 2018-11-05 22:42:06 -06:00
Scott Lahteine 04f173790f Remove trailing whitespace 2018-11-05 22:38:20 -06:00
Scott Lahteine c536ee1122 Clean up bq Zum Mega 3D pins 2018-11-05 22:38:20 -06:00
Scott Lahteine c31e1735dd Restore LPC1768_PIN_INTERRUPT_M, apply to Z3 
- In reference to #12166
 2018-11-05 06:28:49 -06:00
Scott Lahteine 93d5b945dd Hide mesh editing until a valid mesh exists 2018-11-05 05:13:34 -06:00
Ludy f34f09c821 Update German language (#12336) 2018-11-05 04:33:31 -06:00
Roman Moravčík eefd7676a3 Updated slovak translation (#12338) 2018-11-05 04:31:12 -06:00
Scott Lahteine 486f2a66a9 Fix MBL XY parameter error messages 
Fix #11522
 2018-11-05 04:17:37 -06:00
Scott Lahteine 2613ddf61c Fix "circle" 2018-11-05 04:17:37 -06:00
Scott Lahteine b779b42ffd Prevent current step-down going negative 
Addressing #11348
 2018-11-05 04:17:37 -06:00
Scott Lahteine 427bc64ba1 G28 O respects HOME_AFTER_DEACTIVATE 
Addressing #11271
 2018-11-05 04:17:37 -06:00
Scott Lahteine 3866aeac52 Clean up ENCODER_RATE_MULTIPLIER config 2018-11-05 04:17:37 -06:00
Scott Lahteine 498dfa291e Update and fix CHDK 2018-11-05 04:17:37 -06:00
Scott Lahteine fed84f2961 Use multiplier edit item for mesh point editing 2018-11-05 04:17:37 -06:00
Scott Lahteine d5ab4cd22a Provide a default for Z_PROBE_LOW_POINT 2018-11-05 04:17:37 -06:00
Scott Lahteine 3cbc3ecdd7 Fix 'M43 T' to use 'L' as last pin 
- The documentation is correct. The code was wrong.
 2018-11-05 04:17:37 -06:00
Scott Lahteine 1769249876 Recommend keeping endstops off 2018-11-05 04:17:37 -06:00
Scott Lahteine 5182eaf661 Fix endstops enable behavior during probing 
Fix a bug introduced in #9582
 2018-11-05 04:17:37 -06:00
Scott Lahteine 07a0822ebe M420 support in MARLIN_DEV_MODE 2018-11-04 20:54:38 -06:00
Scott Lahteine 63be48ada6 Add MESH_EDIT_MENU to example configs 2018-11-04 19:07:47 -06:00
KangDroid 82ff7c6542 Add a mesh edit menu for MBL / ABL-Bilinear 2018-11-04 19:07:47 -06:00
Scott Lahteine 44fa7fb18c Cleanups for leveling-related code 2018-11-04 19:07:47 -06:00
Scott Lahteine cc2bc67440 ENABLED(NEWPANEL) => HAS_LCD_MENU 2018-11-04 19:06:10 -06:00
Scott Lahteine fc84878cba MSG_UBL_EDIT_MESH_MENU => MSG_EDIT_MESH 2018-11-04 19:06:10 -06:00
Scott Lahteine cd066bfeba Extend error messages for E factors sanity-checks 2018-11-04 18:42:56 -06:00
Ludy c10edb0998 Update, correct sanity-checks for up to 6 extruders (#12333) 2018-11-04 18:36:45 -06:00
Scott Lahteine 0c85869c26 Clean up file endings 2018-11-04 18:30:10 -06:00
Scott Lahteine b99f0776d6 Clean up some U8G files 2018-11-04 18:30:10 -06:00
Scott Lahteine 8014e1cc9d Allow disable of LCD_TIMEOUT_TO_STATUS (when 0) 2018-11-04 18:30:10 -06:00
Giuliano Zaro bd05816fd8 Update Italian language (#12327) 2018-11-04 16:43:02 -06:00
Scott Lahteine 3c21483c88 Provide DOGLCD SPI pins for MKS SBASE + VIKI 2018-11-04 16:20:22 -06:00
Scott Lahteine e0956bb572 Drop 'register' storage specifier 2018-11-04 16:17:13 -06:00
Scott Lahteine c04cf127f7 Fix EEPROM servo angles init, section grouping 2018-11-04 16:14:54 -06:00
Scott Lahteine 9c0e05552e Suppress some compile warnings 2018-11-04 15:25:31 -06:00
Karl Andersson 176654791e Use board-specific or platform SPI pins in HAL_STM32 (#12323) 2018-11-04 15:03:45 -06:00
Scott Lahteine 60dbd8161c Fix VMAX editing 
Fix #12326
 2018-11-04 07:06:14 -06:00
Scott Lahteine b7ca93ba37 Remove dead comment 2018-11-04 06:10:35 -06:00
Scott Lahteine 608be966d7 Add servos to pins_FYSTEC_F6_13.h 2018-11-04 06:10:35 -06:00
Hannes Brandstätter-Müller 67b22760d9 Return to status to show manual deploy/stow messages (#12324) 2018-11-04 04:51:26 -06:00
tharts f5e8e8b53d Fix broken LPC176x build (#12317) 
* Fix broken LPC176x build
* Add UBL+HD44780 test for LPC1768
 2018-11-04 04:25:03 -06:00
Scott Lahteine f5eab912ed
Apply #pragma once, misc cleanup (#12322) 
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
 2018-11-04 02:25:55 -06:00
Scott Lahteine 8696f882a9
Merge pull request #12313 from thinkyhead/bf2_scara_home_offset 
Revive SCARA home offset (not fully implemented)
 2018-11-03 07:05:24 -05:00
Scott Lahteine 56d2dcb184 Use first_page flag in place of page.page == 0 2018-11-03 06:59:21 -05:00
Scott Lahteine d1ff22b983 Revive SCARA's home offset (unimplemented) 2018-11-03 06:24:41 -05:00
Scott Lahteine 2c9586be0c Clear up HAS_WORKSPACE_OFFSET meaning 2018-11-03 04:06:37 -05:00
Scott Lahteine 6e3caf23b6 IS_DELTA => ENABLED(DELTA) 2018-11-03 03:57:11 -05:00
Scott Lahteine 19f49db96f Tweak / reduce menu items 2018-11-03 01:18:59 -05:00
Scott Lahteine e4cf175163
Synchronize on M204, M205 (#12302) 
* Add parser.seen for multiple parameters
* Fix M666, use !seen for report
* Synchronize on M204, M205
 2018-11-03 01:16:37 -05:00
Ludy 5ba6607181 Fix keypad-related compile error (#12306) 2018-11-02 22:29:32 -05:00
Scott Lahteine 2fb2e286ee Followup to #12256 2018-11-02 01:32:24 -05:00
Scott Lahteine 3eb9838dca Simplify TMC sanity-checks 2018-11-02 01:15:49 -05:00
Scott Lahteine f5b31e218d Followup to #12082 2018-11-02 01:15:27 -05:00
Scott Lahteine 31c28d0dd2
Drop pgm_read_*_near and let headers choose (#12301) 
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
 2018-11-02 00:42:16 -05:00
Scott Lahteine fce150f094 inline static => static inline 2018-11-01 23:15:17 -05:00
Giuliano Zaro 323c088356 Restore LED light color after pid tuning (#12082) 2018-11-01 22:04:19 -05:00
Ludy 9f77df2590 Followup to menu refactor. TMC warnings, sanity. (#12288) 
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
 2018-11-01 16:13:33 -05:00
Nils Hasenbanck cafabf2055 Implement DELAY_NS with CYCCNT on Cortex-M7 (#12283) 2018-11-01 16:11:51 -05:00
Scott Lahteine f5498168ae Ensure PENDING/ELAPSED use a 32-bit integer 2018-11-01 16:08:23 -05:00
MasterPIC 6e041b9c61 Use blink to show more info on LCD (#12256) 2018-11-01 15:56:12 -05:00
Scott Lahteine eb5600acd2 Add parentheses to LCD_CLICKED 2018-11-01 15:06:14 -05:00
Scott Lahteine 42f8b6c530
Make M125 work with SDSUPPORT (#12289) 2018-11-01 15:03:45 -05:00
Scott Lahteine f319087372 Followup to #12293 2018-11-01 14:41:03 -05:00
AnHardt 74bbb13008 Fix Mixer calculations for 32-bit processors (#12293) 2018-11-01 14:38:45 -05:00
Scott Lahteine 549d11225a Add to description of Z_STEPPER_AUTO_ALIGN 
In response to #12272
 2018-10-31 18:07:20 -05:00
Scott Lahteine 2cff0d1f39 Move menu_level_bed_corners to its own file 2018-10-31 17:44:42 -05:00
Scott Lahteine 44f2a82a56 Move axis_homed, axis_known_position to motion.* 2018-10-31 17:44:42 -05:00
Scott Lahteine 946cf8b453 EEPROM read code grouping 2018-10-31 16:43:46 -05:00
Ludy f2adb4b9cc Update German language (#12280) 2018-10-31 16:40:41 -05:00
Karl Andersson 484ca68228 Fix misplaced parentheses (#12284) 2018-10-31 15:34:37 -05:00
Scott Lahteine 1d366db764 Tweaks to CR-10S configuration 2018-10-30 23:36:32 -05:00
Scott Lahteine b5d7f69b51 Followup to #12249 2018-10-30 22:51:45 -05:00
N95JPL b780b69c62 Use font ascent and descent for line positioning (#12224) 2018-10-30 22:39:44 -05:00
Scott Lahteine 9cd3529108 Organize language data, fix Korean and Danish 2018-10-30 20:41:16 -05:00
Chris Pepper 66d44c72c3 Add fast binary file transfer to SD card option (#12249) 2018-10-30 19:44:12 -05:00
Marcio Teixeira 72d8adfd1e Cleanup and refactor EXTENSIBLE_UI (#12227) 
- Add `axis_t`, `extruder_t`, `heater_t`, and `fan_t` to eliminate ambiguity, improve type safety.
- Regularized getter/setter argument order and naming.
- `setAxisPosition` no longer stacks moves in the buffer, allowing it to be called repeatedly on each touch ui tap.
- Implement better manual moves for `EXTENSIBLE_UI` (#12205)
- Calling `setAxisPosition_mm` no longer buffers the entire move to the new position, but instead causes small moves towards it to be made during the idle loop. This allows the user to adjust the destination even after the move has started and makes the UI feel much more responsive.
- As suggested by @ejtagle, the new code keeps the planner buffer full to ensure smooth motion without stops and starts.
- Change `En`, `Hn` and `FANn` to zero-based indices.
- Labels consistent with the rest of Marlin code.
 2018-10-30 19:42:26 -05:00
Karl Andersson 1946f729fd STM32 FastIO using register access (#12276) 2018-10-30 19:25:44 -05:00
Scott Lahteine 56057bcecd Fix lcd_impl_status_screen_1 2018-10-30 19:24:16 -05:00
Scott Lahteine 4ed579cafc Americanized English spelling 2018-10-30 18:55:38 -05:00
Scott Lahteine 9e663a624b Apply #pragma once to configuration files 2018-10-30 18:35:12 -05:00
Scott Lahteine 98c32d8df1 Fix a config endif label 2018-10-30 18:28:16 -05:00
Scott Lahteine 3583e2b449
Followup to Menu Refactor (#12275) 2018-10-30 16:34:45 -05:00
TheLongAndOnly 5536228359 G34 Auto-align multi-stepper Z axis (#11302) 2018-10-29 14:01:36 -05:00
Scott Lahteine f9b80e7217 Make getfilename_sorted standard for listings 2018-10-29 13:54:21 -05:00
Scott Lahteine 5ead026967 Fix menu_temp_xx_filament_change menu items 2018-10-28 20:43:33 -05:00
Scott Lahteine d632e44c8c
[Merge] Refactor LCD menus / screens (#12199) 2018-10-28 18:18:22 -05:00
Ludy 1f9806875c Update German language (#12261) 2018-10-28 18:11:55 -05:00
mholeys 63ce8baa55 Fix Teensy 3.5/3.6 ADC access for ADC1 (#12258) 2018-10-28 15:51:49 -05:00
Scott Lahteine 3a935fd72b Reduce repetition in menu edit items 2018-10-28 15:46:45 -05:00
Scott Lahteine b063b1b722 Reorganize includes and declarations 2018-10-28 15:46:45 -05:00
Scott Lahteine 43cf913048 Move SD Card Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 0161d3f733 Move Custom User Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 3b0d2330b6 Move Delta Calibrate Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 6896847210 Move LED Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 9cd5471202 Move Job Recovery Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 9f11e0284c Move Filament Change Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine d87ab3ed20 Move Advanced Settings Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 587a64d80c Move Bed Leveling Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 96f313fb41 Move Info Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 423ab029b2 Move Temperature Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 489017995e Move UBL Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine a489c9fa52 Move Motion Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 3a9ad9f2b1 Move Configuration Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 143d4ec043 Move Tune Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 829effc1fe Move Main Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine 37ff663b02 Convert LIGHTWEIGHT_UI to CPP 2018-10-28 15:46:45 -05:00
Scott Lahteine a964f098b3 Make dogm status screen a CPP 2018-10-28 15:46:45 -05:00
Scott Lahteine 8055ed24ff Move font data to a subfolder 2018-10-28 15:46:45 -05:00
Scott Lahteine 774a6e8199 Drop TALL_FONT_CORRECTION 2018-10-28 15:46:45 -05:00
Scott Lahteine c825c419d4 Convert DOGM / HD44780 impl to CPP files 2018-10-28 15:46:45 -05:00
Scott Lahteine 182b1405d9 LCD conditionals in configurations 2018-10-28 15:46:45 -05:00
Scott Lahteine 2bf18950ab Refactor LCD menus 2018-10-28 15:46:45 -05:00
Scott Lahteine ac5f2762b7 Use E_AXIS_N where possible 2018-10-28 15:46:45 -05:00
MasterPIC 6fbc87301f 'G29 H' to set a centered square probe area (linear, bilinear) (#12242) 2018-10-27 20:30:21 -05:00
Karl Andersson c1e8bd6add Remove STM32 board-specific delays (#12243) 
...and replace with delays for all HAL_STM32 boards.
 2018-10-27 17:26:12 -05:00
Scott Lahteine 3c9daf322a MSG_CNG_SDCARD => MSG_CHANGE_SDCARD 2018-10-27 13:56:29 -05:00
Scott Lahteine 4b7a0a5b39 Require TMCStepper 0.2.2 or newer 
In reference to #12175
 2018-10-27 11:15:28 -05:00
Scott Lahteine ab8425f1b5
Clean up PROBE_TRIGGERED_WHEN_STOWED_TEST (#12232) 2018-10-26 19:18:20 -05:00
Chris Rigter 3028a620af Add RACK_AND_PINION_PROBE (#12218) 2018-10-26 18:24:24 -05:00
InsanityAutomation ad60f0691c Add Creality3D RAMPS pins definitions (#12229) 2018-10-26 16:09:04 -05:00
Scott Lahteine 5580773191
Use FastIO, sanity-check LPC SD options, apply formatting (#12231) 2018-10-26 15:23:02 -05:00
Scott Lahteine d015f746cc
Fix some compile warnings (#12220) 2018-10-26 03:53:06 -05:00
Scott Lahteine dacb5324e8 Fix display of Y on Graphical LCD 2018-10-26 01:43:47 -05:00
Scott Lahteine bf9dd4f4cf
Add helpers for custom text in menu items (#12214) 
For some features it can be useful to write custom text in a menu item. This commit provides helpers to make this easier.
 2018-10-25 15:17:53 -05:00
Scott Lahteine e8031b1152 Add Custom Microstepping options 2018-10-25 11:26:32 -05:00
Scott Lahteine fbfb48cce0 Indent a block 2018-10-25 10:52:27 -05:00
Marcio Teixeira 1a00d1bdaf Add pullup to USB interrupt line 
- A pullup on the INT pin is required when the pin is level-active
 2018-10-25 10:42:08 -05:00
TheSFReader a07ac6312f G0 feedrate may be fixed or variable (#12172) 2018-10-25 10:35:16 -05:00
Scott Lahteine 53c535a0c1 Remove trailing whitespace 2018-10-25 09:46:33 -05:00
Roman Moravčík 55dec02ca1 Allow X, Y, Z manual move when cold. (#12209) 2018-10-25 09:13:52 -05:00
Luc Van Daele 7243101135 z_offset fix for deltas (#12210) 2018-10-25 09:11:26 -05:00
Scott Lahteine 9613f00877 Fix getProgress_seconds_elapsed to return seconds 2018-10-24 18:05:15 -05:00
gjdodd 5d487ef40e Fix null exception due to duration_t of zero (#12207) 2018-10-24 17:59:33 -05:00
Giuliano Zaro a9061714f2 Update Italian language (#12196) 2018-10-24 16:40:48 -05:00
InsanityAutomation aebbb2359d Fix IDEX homing X0 wrong direction (#12200) 2018-10-24 16:40:06 -05:00
gjdodd 0a549fd1f2 Fix EXTENSIBLE_UI compile errors (#12206) 2018-10-24 16:36:11 -05:00
Roman Moravčík a80ba8fc6e Slovak translation update (#12202) 2018-10-24 16:02:38 -05:00
Roman Moravčík e48cbff10d Fixed redefinition warnings of MSG_HOTEND_TOO_COLD. (#12203) 2018-10-24 15:00:07 -05:00
Scott Lahteine 7a04eb3a8b Fix some comment formatting 2018-10-23 22:35:44 -05:00
Scott Lahteine 2f873a119f Revert some UBL strings 2018-10-23 15:39:59 -05:00
Ludy a93e9e6e9b Use preheat labels in place of PLA/ABS (#12194) 2018-10-23 15:38:17 -05:00
Karl Andersson aa72884a6e Enable use of SERIAL_PORT_2 on HAL_STM32 (#12197) 2018-10-23 15:24:58 -05:00
Scott Lahteine 46360f18b4 Bring thermistor_75.h up to speed 2018-10-23 14:52:16 -05:00
Scott Lahteine e229b831fa Customizable preheat labels 2018-10-23 00:57:50 -05:00
Scott Lahteine a553ab82e0 Add e index to _lcd_move_distance_menu 2018-10-22 23:35:04 -05:00
Scott Lahteine 3a46212dd8
Better cold extrusion prevention in LCD menu (#12189) 2018-10-22 20:54:38 -05:00
Marcio Teixeira fc31da1114 Implement custom delay/millis for EXTENSIBLE_UI (#12188) 2018-10-22 19:37:48 -05:00
forkoz 3a3ab3391f Return set_directions() to stepper.cpp (#12182) 
Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.
 2018-10-22 19:30:51 -05:00
Scott Lahteine e5ae7a07d1 Suppress compiler warning 2018-10-21 13:44:27 -05:00
Hannes Brandstätter-Müller 6ee2af5e2d Simplify pins_TRIGORILLA_14.h (#12162) 2018-10-21 03:23:20 -05:00
Roman Moravčík d801f85963 Correct EEPROM read/write disparities. (#12169) 2018-10-21 02:56:31 -05:00
Scott Lahteine 8d3a92fc4a Followup to millis_t patch 2018-10-20 23:23:58 -05:00
Ludy 44369d536a Use millis_t where needed (#12152) 2018-10-20 23:21:27 -05:00
Scott Lahteine b641571098 Replace types.h with millis_t.h 2018-10-20 23:07:12 -05:00
Scott Lahteine eeef4e630a Fix compile error in leds.h 2018-10-20 23:07:12 -05:00
Scott Lahteine 9969c06cb5 Fix compiler warning 2018-10-20 17:16:59 -05:00
Farkas Péter 427c80119a Hide some menu items when busy: fix typo (#12164) 2018-10-20 15:55:31 -05:00
InsanityAutomation 55ac2f4c23 Fix filament runout for idex duplication modes (#12168) 2018-10-20 13:39:33 -05:00
Karl Andersson b640b3b0d6 Define ST7920 delays for board ARMED (#12161) 2018-10-20 13:12:54 -05:00
Marcio Teixeira 2e5e689a7f Fix kill() and ExtensibleUI (#12160) 
* Fix to isPrintingFromMedia()

  - isPrintingFromMedia() will now return true even if SD print is paused.
  - isPrintingFromMediaPaused() allows UI to determine if the print is paused.

* Don't use _delay_us in minkill (#12145)

  - In HAL_DUE, _delay_us is simply an alias for delay, which causes the board to hang and subsequently reboot due to the watchdog timer.

* Shorten code with IFSD macro
 2018-10-20 01:44:46 -05:00
Scott Lahteine b381cad399 Clean up trailing whitespace 2018-10-19 15:27:17 -05:00
Scott Lahteine 9090065e9f Move EXTRA_FAN_SPEED above FWRETRACT 2018-10-19 15:15:00 -05:00
Karl Andersson 4eb798dbdc Add support for Arm'ed (STM32F4) board (#12147) 2018-10-19 14:50:52 -05:00
TheSFReader 1fb9b299d4 Add M524 to abort SD printing (#12155) 2018-10-19 14:25:07 -05:00
Scott Lahteine d26d9d5b81 Tweak IS_SD_INSERTED 2018-10-19 14:00:36 -05:00
Scott Lahteine c6a5c74208 Add parentheses to SD macros 2018-10-19 13:52:57 -05:00
Giuliano Zaro aa9202260d Fix endstop when no interrupt (#12158) 2018-10-19 13:45:39 -05:00
Scott Lahteine 8c02dd971b Move disable_all_steppers to minkill 2018-10-19 13:42:04 -05:00
Scott Lahteine 3847c08f7e Disable heaters/steppers before message 2018-10-19 13:30:46 -05:00
Marcio Teixeira 71e19baf69 Fix kill => disable_all_heaters => print_job_timer.stop (#12146) 
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
 2018-10-18 21:20:56 -05:00
Ludy 4cc1c2627e Update German language (#12143) 2018-10-18 19:17:37 -05:00
Ludy 75a0d46edf Fix compile warning re: LCD_INFO_SCREEN_STYLE 2018-10-18 19:16:24 -05:00
Scott Lahteine a81763c237 Pins E sanity check tweak 2018-10-18 18:48:23 -05:00
Giuliano Zaro bc22641002 [2.0.x] Updated Italian Language (#12148) 2018-10-18 18:08:39 -05:00
Michael Triffon eded90bf87 Updated Azteeg X5 Mini Wifi pins for onboard SD (#12133) 2018-10-18 11:52:55 -05:00
nhchiu 27a84fd021 Remove unused option in Anycubic Kossel config (#12138) 2018-10-18 11:47:59 -05:00
Scott Lahteine 67a3c5a16a
Alternative info screen (Prusa-style) (#12132) 
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
 2018-10-18 11:34:52 -05:00
Marcio Teixeira 5b7dd553d3 Fix sd_mmc_spi_mem capacity; clean up USB code (#12134) 
- Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card.
- Clean up the USB flashdrive code and add better debugging.
 2018-10-18 11:34:07 -05:00
Scott Lahteine df768e7d8f Followup to #12129 2018-10-18 11:29:49 -05:00
Chris Pepper 3c13c9e3e9 [LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support (#12129) 2018-10-18 11:26:50 -05:00